LaCo0.95Mo0.05O3/CeO2 composite can promote the effective activation of peroxymonosulfate via Co3+/Co2+ cycle and realize the efficient degradation of hydroxychloroquine sulfate.

Hydroxychloroquine sulfate (HCQ) is extensively utilized due to its numerous therapeutic effects. Because of its properties of high solubility, persistence, bioaccumulation, and biotoxicity, HCQ can potentially affect water bodies and human health. In this study, the LaCo0.95Mo0.05O3-CeO2 material was successfully prepared by the sol-gel process, and it was applied to the experiment of degrading HCQ by activating peroxymonosulfate (PMS). The results of characterization analysis showed that LaCo0.95Mo0.05O3-CeO2 material had good stability, and the problem of particle agglomeration had been solved to some extent. Compared with LaCo0.95Mo0.05O3 material, it had a larger specific surface area and more oxygen vacancies, which was helpful to improve the catalytic activity for PMS. Under optimal conditions, the LaCo0.95Mo0.05O3-CeO2/PMS system degraded 95.5 % of HCQ in 10 min. The singlet oxygen, superoxide radicals, and sulfate radicals were the main radicals for HCQ degradation. The addition of Mo6+/Mo4+ and Ce4+/Ce3+ promoted the redox cycle of Co3+/Co2+ and enhanced the degradation rate of HCQ. Based on density functional theory and experimental analysis, three HCQ degradation pathways were proposed. The analysis of T.E.S.T software showed that the toxicity of HCQ was obviously reduced after degradation. The LaCo0.95Mo0.05O3-CeO2/PMS system displayed excellent reusability and the ability to remove pollutants in a wide range of real-world aqueous environments, with the ability to treat a wide range of pharmaceutical wastewater. In summary, this study provides some ideas for developing heterogeneous catalysts for advanced oxidation systems and provide an efficient, simple, and low-cost method for treating pharmaceutical wastewater that has good practical application potential.

Optimizing cooperative catalysis of multiple defective interfaces in Pt/mullite catalysts for NO oxidation.

Nitric oxide (NO) oxidation is an integral part of the nitrogen chemical cycle, but competitive activation of NO/O2 over single platinum (Pt)-based catalysts result in inadequate low temperature performance. Here, we constructed catalysts with BiMn2O5/CeO2 and Pt/BiMn2O5 defective interfaces (sufficient activation of NO/O2). The constructed catalyst achieved 95 % NO conversion at 260 °C in NO/O2 atmosphere, superior to most known catalysts. Even after aging (800 °C for 16 h), the NO conversion was up to 76 %. Further, the catalyst can be applied to actual diesel exhaust. Detailed oxygen vacancies (Ov) characterization reveals that BiMn2O5/CeO2 defective interface created by Ce3+-Ov + Mn4+-O ↔ Ce4+-O + Mn3+-Ov promote the activation of NO (on Mn3+ sites) and O2 (on Mn3+-Ov sites). Besides, the Ov on Pt/BiMn2O5 defective interface compensate for the loss of Pt sites ensuring hydrothermal stability. And this construction of multiple defective interfaces develops a pathway for boosting catalytic reactions.

Oxygen vacancy-rich K-Mn3O4@CeO2 catalyst for efficient oxidation degradation of formaldehyde at near room temperature.

Synthesis of catalysts with high catalytic degradation activity for formaldehyde (HCHO) at room temperature is highly desirable for indoor air quality control. Herein, a novel K-Mn3O4@CeO2 catalyst with excellent catalytic oxidation activity toward HCHO at near room temperature was reported. In particular, the K addition in K-Mn3O4@CeO2 considerably enhanced the oxidation activity, and importantly, 99.3 % conversion of 10 mL of a 40 mg/L HCHO solution at 30 °C for 14 h was achieved, with simultaneous strong cycling stability. Moreover, the addition of K species considerably influenced the chemical valence state of Mn from +4 (ε-MnO2) to +8/3 (Mn3O4) on the surface of CeO2, which obviously changed the tunnel structure and the number of oxygen vacancies. One part of K species is uniformly dispersed on K-Mn3O4@CeO2, and the other part exists in the tunnel structure of Mn3O4@CeO2, which is mainly used to balance the negative charge of the tunnel and prevent collapse of the structure, providing enough active sites for the catalytic oxidation of HCHO. We observed a phase transition from tunneled KMnO2 to Mn3O4 to tunneled MnO2 with the decreasing K+ content, in which K-Mn3O4@CeO2 exhibited higher HCHO oxidation activity. In addition, K-Mn3O4@CeO2 exhibited lower oxygen vacancy formation and HCHO adsorption energies in aqueous solution based on density functional theory calculations. This is because the K species provide more active oxygen species and richer oxygen vacancies on the surface of K-Mn3O4@CeO2, promote the mobility of lattice oxygen and the room-temperature reduction properties of oxygen species, and enhance the ability of the catalyst to replenish the consumed oxygen species. Finally, a possible HCHO catalytic oxidation pathway on the surface of K-Mn3O4@CeO2 catalyst is proposed.

Facile fabrication of redox nanoparticles loaded with exosomal-miRNAs and resveratrol as glycation inhibitor in alleviating the progression and development of diabetic cataract.

Diabetic cataract (DC) represents a highly prevalent ocular manifestation resulting from diabetes often culminating in vision impairment among individuals with diabetes. Regrettably, the armamentarium of pharmaceutical interventions capable of both delaying and thwarting the onset of DC remains conspicuously sparse. Based on contemporary investigations, the pathogenesis of DC is prominently influenced by oxidative harm to the crystalline lens and the nonenzymatic glycosylation of lens proteins. Consequently, we have developed self-regenerating cerium oxide nanoparticles (CeO2 NPs), enveloped with resveratrol (RSV) and exosomal-microRNA (miRNA) to alleviate the effects of DC in an in vitro model. Moreover, the inclusion of RSV within CeO2 NPs serves a dual purpose. It can act as an antioxidant, minimizing glycation, and induce oxidative stress by effectively neutralizing reactive oxygen species (ROS). Additionally, it serves as a glycation inhibitor effectively preventing the cross-linking. Consequently, it helps minimize the glucose level in hemoglobin and inhibits the formation of advanced glycation end products (AGEs). Likewise, the CeO2-exosomal-miRNA when treated alone found to slightly impede the viability of human lens epithelial cells (HLEC) and induce apoptosis by suppressing the expression of α-crystalline gene (CRYAA). Particularly, miRNAs target genes associated with oxidative stress pathways, protein glycation, and the generation of AGEs, hence preventing structural damage to lens proteins. Compared with CeO2, RSV-CeO2, and miRNA-RSV-CeO2, the presence of miRNA-RSV-CeO2 led to a significant decrease in hemoglobin glycation. Remarkably, miRNA-RSV-CeO2 NPs attenuate the formation of malondialdehyde (MDA) and conjugated dienes (CD) with a relative value of 14.63 and 11.37 nmol/mg. As per the report, this method presents a promising opportunity to implement the proposed material combination for attenuating diabetic cataracts.

Chitosan xerogel embedded with green synthesized cerium oxide nanoparticle: An effective controlled release fertilizer for improved cabbage growth.

With the growing awareness on the adverse effects of conventional fertilizers; the use of sustainable and controlled release fertilizers has garnered much significance. In the present study, we report the synthesis of chitosan-benzaldehyde Schiff base xerogel incorporated with green synthesized cerium oxide nanoparticle using Psidium guajava leaves extract as a sustainable fertilizer. Spherical CeO2 NPs having an average particle size of 15.3 nm and zeta potential of - 39.9 mV was obtained. The urea-loaded nanocomposite xerogel (CsB@U/CeO2) was examined for cabbage growth. The water retention capacity extended for >2 weeks. A controlled release profile for urea was accomplished from CsB@U/CeO2 for a period extending for 30 days. The kinetics assay suggested that presence of CeO2 NPs asserted a greater role in urea-controlled release from the CsB@U/CeO2 nanocomposite hydrogel owing to polymer relaxation. The growth parameters of cabbages such as head height, diameter, fresh head weight, head circumference was enhanced in plants fertilized by CsB@U/CeO2 as compared to urea. Furthermore, the phenolic content, free radical scavenging activity, protein content, sugar and flavonoid content were also found higher in CsB@U/CeO2 fertilized plants. This study puts forth CsB@U/CeO2 xerogel can be potentially harnessed as an alternative to urea in sustainable agriculture.

Ternary g-C3N4/Co3O4/CeO2 nanostructured composites for electrochemical energy storage supercapacitors.

Extensive use of fossil fuels causes heavy discharge of carbon dioxide, depleting energy resources and this requires environmentally friendly and effective energy storage materials. Hybrid supercapacitors (HSCs) are recently developed as effective energy storage materials enabling high capacitance retention rate and quick charging. Herein, synthesis of two-dimensional g-C3N4 nanosheets supported onto three-dimensional flower-like Co3O4/CeO2 (CoCe) ternary synergistic heterostructures are developed as effective electrodes for hybrid supercapacitor applications. Addition of g-C3N4 produces substantial surface active sites, enabling its synergistic effect with CoCe to enhance electrochemical performance having exceptional conductivity. The CoCe/g-C3N4 ternary composite electrode exhibits a higher specific capacitance of 1088.3 F g-1 at 1 A g-1 with 96 % of recycling stability over 5000 cycles, which is ∼5.5 and ∼5 folds higher specific capacitance than the pristine g-C3N4 and CoCe electrodes. EIS analysis revealed that CoCe/g-C3N4 electrode offered reduced charge transfer resistance compared to pristine electrodes. The fabricated two-electrode HSC device displays outstanding retention after 10,000 cycles with an ultra-high specific capacitance of 119.8 F g-1, excellent energy density 37.4 Wh kg-1 and power density of 749.9 W kg-1. This research showcases the perspectives of CoCe/g-C3N4 ternary electrodes in hybrid supercapacitors and other renewable energy storage devices.

The Investigation of Structural, Optical and Thermal Properties of Nickel Doped CeO2 Integrated PVC Nanocomposite.

PVC nanocomposite (NC) films with cubic CeO2 and Ni-doped CeO2 (NDC) have been prepared using a conventional solution-casting technique. The prepared films were characterized with FT-IR spectrometer, X-ray diffraction (XRD), and scanning electron microscopy (SEM). The optical and thermal properties of the films were evaluated using a UV-visible spectrophotometer and TGA/DSC. The optical study revealed a decrease in optical band gap energies (4.19 to 4.06 eV) whereas the increase in other optical constraints such as optical conductivity, Urbach energy, dispersion energy, refractive index, and dielectric constant of PVC NCs than pristine PVC was observed. The XRD patterns showed the presence of cubic crystalline NDC with a relatively narrower principal diffraction peak in the PVC matrix and the nonexistence of unexpected vibrational peaks in the FTIR spectra of PVC NCs confirmed the successful incorporation of nanostructured CeO2 and NDC into PVC. Thermogravimetric analysis showed the higher thermal stability of NDC/PVC NC than PVC whereas differential scanning calorimetry declared no significant change in the glass transition temperature (Tg) of the NCs. Moreover, a good dispersion of Ni-doped CeO2 nanofiller was noticed in scanning electron micrographs.

Constructing Ce-OH groups on CeO2 for enhancing removal and recovery of uranium from wastewater and seawater.

Efficient recovery of uranium from wastewater and seawater provides an important guarantee for the sustainable growth of nuclear energy. Herein, we skillfully use the alkali etching method to construct CeO2 hollow spheres rich in Ce-OH groups for the removal and recovery of uranium from water matrixes. It is found that the CeO2 exhibits fast adsorption kinetics (equilibrium time within 10 min) and moderate adsorption capacity (143.1 mg/g), and the removal efficiency of low concentration uranium (0.1 g/L and 1 g/L) reaches 100% within 1 min of adsorption. Moreover, the adsorption of uranium by CeO2 is almost unaffected by common anions and cations in the environment, even if the concentration of anions is 1000 times that of uranium. More importantly, the CeO2 can enrich uranium concentration in seawater by 167.9 times and the recovery rate reaches 83.9%. Mechanistic studies reveal that the adsorption of uranium by CeO2 is mainly attributed to the rich Ce-OH groups on the surface of CeO2, resulting in the rapid adsorption of U(VI) and mainly forms a single-bridge model. The findings of this study provide a green and efficient path for the removal and recovery of uranium from wastewater and seawater.

Improved surface acidity of CeO2/TiO2 catalyst by Cu doping to enhance the SCR catalytic activity.

The catalyst is based on CeO2 cannot be widely used in SCR reaction because of its poor NH3 adsorption performance. In this study, Cu-doped CeTi catalyst was designed. The results show that the CeTiCu0.3 has a wide active temperature window of 200-450 °C in NH3-SCR reaction, and NO conversion is > 80%. This is mainly due to the fact that Cu doping provides more acidic sites on the surface of CeTi catalyst, especially the increase of Lewis acid sites is more obvious. NH3-TPD showed that CeTiCu0.3 had a large NH3 adsorption capacity and was mainly adsorbed at Lewis acid sites. In situ DRIFTs results show that NH3 first adsorbs on the Lewis acid site of catalyst in coordination state and reacts with gaseous NOx, while NOx adsorbed on catalyst surface has low reactivity. Therefore, the CeTiCu0.3 catalyst is mainly controlled by the Eley-Rideal mechanism. More Lewis acid sites, and abunda nt Cu2+/Cu+ and Ce4+/Ce3+ formed Cu2+, Ce3+ and surface reactive oxygen species are the main reasons for the excellent catalytic performance of CeTiCu.

A sandwich-type electrochemical sensor based on RGO-CeO2-Au nanoparticles and double aptamers for ultrasensitive detection of glypican-3.

A sandwich-type electrochemical aptasensor for ultrasensitive detection of glypican-3 (GPC3) was constructed using GPC3 aptamer (GPC3Apt) labelled reduced graphene oxide-cerium oxide-gold nanoparticles (RGO-CeO2-Au NPs) as the signal probe and the same GPC3Apt as the capture probe. The electrochemical redox properties of CeO2 (Ce3+/Ce4+) in the RGO-CeO2-Au NPs indicate the electrochemical signals. When the target GPC3 was present, an "aptamer-protein-aptamer" sandwich structure was formed on the sensing interface due to the specific binding between the protein and aptamers, resulting in an increased electrochemical redox signal detected by differential pulse voltammetry (DPV) technique. Under optimal conditions, the established aptasensor exhibited a logarithmic linear relationship between the current response and GPC3 concentration in the range 0.001-100.0 ng/mL, with a minimum detection limit of 0.74 pg/mL. Using the spike-recovery tests for measurement of the human serum samples, the recovery was from 99.26 to 114.01%, and the RSD range was 3.04 to 5.34%. Furthermore, the sandwich-type electrochemical aptasensor exhibited excellent performance characteristics such as good stability, high specificity, and high sensitivity, demonstrating effective detection of GPC3 in human serum samples and can be used as a clinical detection tool for GPC3.

Collaboration in Contradiction: Self-Adaptive Synergistic ROS Generation and Scavenge Balancing Strategies Used for the Infected Wounds Treatment.

The rational utilization of ROS is key to treating infected wounds. Exogenous ROS can destroy bacterial structures, quickly kill bacteria, and inhibit secondary infections. However, excess ROS at the wound will cause a secondary inflammatory response. Acute infections exacerbate this damage by increasing endogenous ROS, complicating the maintenance of ROS homeostasis. Therefore, regulating the balance of ROS production and scavenging in wounds has emerged as a promising strategy for wound treatment. Conventional ROS balancing platforms are mostly based on the " all for one" strategy of functional superposition and lack self-adaptability and integration. To subvert this conventional strategy, this study proposes a "one for all" self-adaptive integrated photodynamic therapy (PDT)-antioxidant model to actively regulate the ROS balance. A gelatin-hyaluronic acid hydrogel embedded with Se-modified cerium dioxide nanoparticles (Gel-HA-Se@CeO2 NPs) is designed for treating infected wounds. The Se@CeO2 NPs serve both as nanoenzymes and photosensitizers(PS). As nanoenzymes, they exhibit catalase and superoxide dismutase activities, converting hydrogen peroxide and superoxide anions into oxygen. As a PS, it synergizes with oxygen under NIR irradiation to rapidly produce singlet oxygen. Additionally, Se modification enhances the PDT effects by disrupting bacterial antioxidant systems. In vitro and in vivo experiments revealed that the ROS balance platform polarizes M1-type macrophages to M2-type macrophages, altering the wound microenvironment from proinflammatory to prohealing. RNA sequencing revealed that this hydrogel accelerated the reconstruction of the vascular network of the wound by activating the PI3K/AKT pathway and increasing VEGF secretion.This strategy is believed to be beneficial not only for infected wounds but also for treating other conditions that involve the regulation of reactive oxygen species, such as tumors and bacterial infections.

Strikingly Facile Cleavage of N-H/N-O Bonds Induced by Surface Frustrated Lewis Pair on CeO2(110) to Boost NO Reduction by NH3.

Ceria with surface solid frustrated Lewis pairs (FLPs), formed by regulating oxygen vacancies, demonstrate remarkable ability in activating small molecules. In this work, we extended the application of FLPs on CeO2(110) to the selective catalytic reduction of NO by NH3 (NH3-SCR), finding a notable enhancement in performance compared to ordinary CeO2(110). Additionally, an innovative approach involving H2 treatment was discovered to increase the number of FLPs, thereby further boosting the NH3-SCR efficiency. Typically, NH3-SCR on regular CeO2 follows the Eley-Rideal (E-R) mechanism. However, density functional theory (DFT) calculations revealed a significant reduction in the energy barriers for the activation of N-O and N-H bonds under the Langmuir-Hinshelwood (L-H) mechanism with FLPs present. This transition shifted the reaction mechanism from the E-R pathway on regular R-CeO2 to the L-H pathway on FLP-rich FR-CeO2, as corroborated by the experimental findings. The practical application of FLPs was realized by loading MoO3 onto FLP-rich FR-CeO2, leveraging the synergistic effects of acidic sites and FLPs. This study provides profound insights into how FLPs facilitate N-H/N-O bond activation in small molecules, such as NH3 and NO, offering a new paradigm for catalyst design based on catalytic mechanism research.

Functional UV Blocking and Superhydrophobic Coatings Based on Functionalized CeO2 and Al2O3 Nanoparticles in a Polyurethane Nanocomposite.

Water repellency has significant potential in applications like self-cleaning coatings, anti-staining textiles, and electronics. This study introduces a novel nanocomposite system incorporating functionalized Al2O3 and CeO2 nanoparticles within a polyurethane matrix to achieve hydrophobic and UV-blocking properties. The nanoparticles were functionalized using an octadecyl phosphonic acid solution and characterized by FTIR and XPS, confirming non-covalent functionalization. Spin-coated polyurethane coatings with functionalized and non-functionalized Al2O3, CeO2, and binary Al2O3-CeO2 nanoparticles were analyzed. The three-layered Al2O3-CeO2-ODPA binary system achieved a contact angle of 166.4° and 85% transmittance in the visible range. Incorporating this binary functionalized system into a 0.4% w/v polyurethane solution resulted in a nanocomposite with 75% visible transmittance, 60% at 365 nm UV, and a 147.7° contact angle after three layers. These findings suggest that ODPA-functionalized nanoparticles, when combined with a polymer matrix, offer a promising approach to developing advanced hydrophobic and UV-protective coatings with potential applications across various industrial sectors.

Investigation of the interaction mechanism and enzyme activity of trypsin with cerium oxide nanoparticles.

In this study, the interaction mechanism and native conformational variation of trypsin (Try) affected by CeO2 nanoparticles (NPs) were systematically studied via various spectroscopic methods. The results of fluorescence spectroscopy revealed that CeO2 NPs markedly quenched the endogenous fluorescence of Try via the mechanism of static quenching. The main forces that contributed to the binding of Try and CeO2 NPs were van der Waals forces, hydrogen bonds, and electrostatic forces, as observed by the binding constants and significant thermodynamic characteristics of the two substances. The incorporation of CeO2 NPs lead to a slight change in the structure of Try, as shown by synchronized fluorescence spectroscopy, three-dimensional fluorescence spectroscopy and circular dichroism (CD) spectroscopy. Moreover, the enzyme activity of Try decreased with the addition of CeO2 NPs. This study is highly important for fully evaluating the use of CeO2 NPs in biomedical sciences and is helpful for clarifying the mechanism between Try and CeO2 NPs at the molecular level.

Synthesis and Characterization of Cr doped CeO2 nanoparticles for Rhodamine B dye degradation.

The main aim of this work is to synthesis and study Cr doped CeO2 nanoparticles for Rhodamine B dye degradation. In this regard, 2 wt% and 4 wt% Cr doped CeO2 nanoparticles were successfully synthesized through a simple chemical precipitation method. The structural characteristics and elemental composition of the synthesized samples were analyzed using XRD and XPS techniques. The cubic fluorite structure with space group Fm 3m was confirmed through XRD and the presence of Ce, O and Cr atoms in the samples were identified through XPS. Spindle shaped structures were observed from FESEM analysis for 2 % Cr doped sample. Confocal Raman Spectroscopy was used to confirm the CeO2 stretching vibrational mode at 469 cm-1. The metal oxygen band was obtained at 447.49 cm-1 from FTIR spectroscopy. The band gap values were calculated from the Tauc plot and the values were found to be 2.0 eV, 2.85 eV and 2.88 eV for CeO2, 2 % Cr and 4 % Cr doped samples. The prepared nanoparticles were subjected to photocatalytic degradation of Rhodamine B dye at 5 ppm concentration and highest efficiency of 98.3 % was observed by the 4 % Cr doped CeO2 sample.

4d-2p-4f Gradient Orbital Coupling Enables Tandem Catalysis for Simultaneous Abatement of N2O and CO on Atomically Dispersed Rh/CeO2 Catalyst.

N2O and CO coexist in various industrial and mobile sources. The synergistic reaction of N2O and CO to generate N2 and CO2 has garnered significant research interest, but it remains extremely challenging. Herein, we constructed an atomically dispersed Rh-supported CeO2 catalyst with asymmetric Rh-O-Ce sites through gradient Rh 4d-O 2p-Ce 4f orbital coupling. This design effectively regulates the 4f electron states of Ce and promotes the electron filling of the O 3π* antibonding orbital to facilitate N-O bond cleavage. Near-ambient-pressure X-ray photoelectron spectroscopy (NAP-XPS) reveals that CO reacts with the surface-adsorbed O* generated by N2O decomposition through self-tandem catalysis, accelerating the rate-limiting step in N2O decomposition and activating the synergistic reaction of N2O and CO at temperatures as low as 115 °C. This work can guide the development of high-performance catalysts using the strategy of high-order orbital hybridization combined with the tandem concept to achieve versatile catalytic applications.

Cocatalyst Embedded Ce-BDC-CeO2 S-Scheme Heterojunction Hollowed-Out Octahedrons With Rich Defects for Efficient CO2 Photoreduction.

Constructing heterojunction photocatalysts with optimized architecture and components is an effective strategy for enhancing CO2 photoreduction by promoting photogenerated carrier separation, visible light absorption, and CO2 adsorption. Herein, defect-rich photocatalysts (Ni2P@Ce-BDC-CeO2 HOOs) with S-scheme heterojunction and hollowed-out octahedral architecture are prepared by decomposing Ce-BDC octahedrons embedded with Ni2P nanoparticles and subsequent lactic acid etching for CO2 photoreduction. The hollowed-out octahedral architecture with multistage pores (micropores, mesopores, and macropores) and oxygen vacancy defects are simultaneously produced during the preparation process. The S-scheme heterojunction boosts the quick transfer and separation of photoinduced charges. The formed hollowed-out multi-stage pore structure is favorable for the adsorption and diffusion of CO2 molecules and gaseous products. As expected, the optimized photocatalyst exhibits excellent performance, producing CO with a yield of 61.6 µmol h-1 g-1, which is four times higher than that of the original Ce-BDC octahedrons. The X-ray photoelectron spectroscopy, scanning Kelvin probe, and electron spin resonance spectroscopy characterizations confirm the S-schematic charge-transfer route. The key intermediate species during the CO2 photoreduction process are detected by in situ Fourier transform infrared spectroscopy to support the proposed mechanism for CO2 photoreduction. This work presents a synthetic strategy for excellent catalysts with potential prospects in photocatalytic applications.

Green synthesis, characterization, and multifunctional applications of Ag@CeO2 and Ag@CeO2-pullulan nanocomposites for dye degradation, antioxidant, and antifungal activities.

The synthesis and characterization of novel nanocomposites with unique properties have garnered significant interest. Ag@CeO2 nanocomposite and its pullulan counterparts were prepared using a green approach involving rosemary extract. Characterization techniques, including Fourier Transform Infrared Spectroscopy, UV-visible spectroscopy, zeta potential, Dynamic Light Scattering, High-Resolution Transmission Electron Microscopy, Energy-Dispersive X-ray Spectroscopy, Scanning Electron Microscopy, and X-ray Diffraction, confirmed the formation of Ag@CeO2 nanoparticles (NPs). Pullulan led to increased particle size and improved homogeneity. Employing the Artificial Neural Networks (ANN) model to optimize methylene blue removal by Ag@CeO2 NPs and Ag@CeO2-pullulan NPs demonstrated predictive capabilities up to 97.53 % of MB removal (R2 = 0.9991). The antioxidant test demonstrated that rosemary extract exhibited the highest activity (IC50 = 0.011 mg/mL), then Ag@CeO2 NPs (IC50 = 0.039 mg/mL), and Ag@CeO2-pullulan NPs (IC50 = 0.041 mg/mL). Both Ag@CeO2 NPs and Ag@CeO2-pullulan NPs inhibited Candida albicans growth, with the latter exhibiting enhanced efficacy (MIC = 468.27, MFC = 936.53, and IC50 = 129.60 µg/mL). The study successfully synthesized novel Ag@CeO2-based nanocomposites coupled with pullulan with promising applications in dye removal, and antimicrobial therapy. The incorporation of pullulan improved the properties of the nanocomposites, enhancing their potential for practical use in environmental and biomedical applications.

Ultrasensitive Detection of Dimethylamine Gas for Early Diagnosis of Parkinson's Disease Using CeO2-Coated Ti3C2Tx MXene/Carbon Nanofibers.

Parkinson's disease is a prevalent neurological disorder, with dimethylamine (DMA) recognized as a crucial breath biomarker, particularly at the parts per billion (ppb) level. Detecting DMA gas at this level, especially at room temperature and high humidity, remains a formidable challenge. This study presents an ultrasensitive chemiresistor DMA gas sensor, leveraging the CeO2-coated Ti3C2Tx MXene/carbon nanofiber (CeO2/MXene/C NFs) heterostructure to enhance dimethylamine sensing. The high conductivity of MXene, combined with C-Ti-O bonds and a sp2 hybridized hexagonal carbon structure, increases surface active sites. The presence of Ce3+ promotes the formation of surface-active oxygen species, while the MXene-CeO2 heterojunction broadens the electron depletion layer. Theoretical calculations reveal that the highest adsorption energy for DMA gas is at the Ce top site, explaining the sensor's satisfactory sensitivity, rapid response and recovery process, low detection limit (5 ppb), and high selectivity at room temperature. The Ce3+/Ce4+ dynamic self-refresh mechanism, involving surface hydroxyl elimination, enhances the sensor's performance under high-humid conditions. Clinical breath tests demonstrate the sensor's ability to distinguish between healthy individuals and Parkinson's disease patients, paving the way for developing next-generation sensors for early diagnosis of neurological disorders.

Green synthesis of cerium oxide nanoparticles usingTribulus terrestris: characterization and evaluation of antioxidant, anti-inflammatory and antibacterial efficacy against wound isolates.

Multi-drug resistance (MDR) infections are a significant global challenge, necessitating innovative and eco-friendly approaches for developing effective antimicrobial agents. This study focuses on the synthesis, characterization, and evaluation of cerium oxide nanoparticles (CeO2NPs) for their antioxidant, anti-inflammatory, and antibacterial properties. The CeO2NPs were synthesized using aTribulus terrestrisaqueous extract through an environmentally friendly process. Characterization techniques included UV-visible spectroscopy, Fourier Transform Infrared Spectroscopy (FT-IR), x-ray Diffraction (XRD), Scanning Electron Microscopy (SEM), and Energy Dispersive x-ray (EDX) analysis. The UV-vis spectroscopy shows the presence of peak at 320 nm which confirms the formation of CeO2NPs. The FT-IR analysis of the CeO2NPs revealed several distinct functional groups, with peak values at 3287, 2920, 2340, 1640, 1538, 1066, 714, and 574 cm-1. These peaks correspond to specific functional groups, including C-H stretching in alkynes and alkanes, C=C=O, C=C, alkanes, C-O-C, C-Cl, and C-Br, indicating the presence of diverse chemical bonds within the CeO2NPs. XRD revealed that the nanoparticles were highly crystalline with a face-centered cubic structure, and SEM images showed irregularly shaped, agglomerated particles ranging from 100-150 nm. In terms of biological activity, the synthesized CeO2NPs demonstrated significant antioxidant and anti-inflammatory properties. The nanoparticles exhibited 82.54% antioxidant activity at 100 µg ml-1, closely matching the 83.1% activity of ascorbic acid. Additionally, the CeO2NPs showed 65.2% anti-inflammatory activity at the same concentration, compared to 70.1% for a standard drug. Antibacterial testing revealed that the CeO2NPs were particularly effective against multi-drug resistant strains, includingPseudomonas aeruginosa,Enterococcus faecalis, and MRSA, with moderate activity againstKlebsiella pneumoniae. These findings suggest that CeO2NPs synthesized viaT. terrestrishave strong potential as antimicrobial agents in addressing MDR infections.