Three-Step Enzymatic Remodeling of Chitin into Bioactive Chitooligomers.

Here we describe a complex enzymatic approach to the efficient transformation of abundant waste chitin, a byproduct of the food industry, into valuable chitooligomers with a degree of polymerization (DP) ranging from 6 to 11. This method involves a three-step process: initial hydrolysis of chitin using engineered variants of a novel fungal chitinase from Talaromyces flavus to generate low-DP chitooligomers, followed by an extension to the desired DP using the high-yielding Y445N variant of ß-N-acetylhexosaminidase from Aspergillus oryzae, achieving yields of up to 57%. Subsequently, enzymatic deacetylation of chitooligomers with DP 6 and 7 was accomplished using peptidoglycan deacetylase from Bacillus subtilis BsPdaC. The innovative enzymatic procedure demonstrates a sustainable and feasible route for converting waste chitin into unavailable bioactive chitooligomers potentially applicable as natural pesticides in ecological and sustainable agriculture.

Production of a new chitinase from Nocardiopsis halophila TN-X8 utilizing bio-waste from the blue swimming crab: enzyme characterization and immobilization.

In accordance with the framework of the Circular Blue Bioeconomy in the Mediterranean region, the objective of this study was to evaluate the biotransformation of blue swimming crab (Portunus segnis) residues obtained from the port of Sfax by an extracellular chitinase produced by Nocardiopsis halophila strain TN-X8 isolated from Chott El Jerid (Tozeur, Tunisia). From the analysis of multiple extremophilic Actinomycetota, it was determined that strain TN-X8 exclusively utilized 60 g/L of raw blue swimming crab as its carbon and energy source, achieving a chitinase activity of approximately 950 U/mL following a 6-day incubation period at 40 °C. Pure chitinase, designated as ChiA-Nh30, was obtained after heat treatment, followed by ammonium sulfate fractionation and Sephacryl® S-200 column chromatography. The maximum ChiA-Nh30 activity was observed at pH 3 and 75 °C. Interestingly, compared with cyclohexamidine, ChiA-Nh30 showed a good antifungal effect against four pathogenic fungi. Furthermore, when using colloidal chitin as substrate, ChiA-Nh30 demonstrated a higher degree of catalytic efficiency than the commercially available Chitodextrinase®. In addition, ChiA-Nh30 could be immobilized by applying encapsulation and encapsulation-adsorption techniques. The kaolin and charcoal used acted as excellent binders, resulting in improved ChiA-Nh30 stability. For the immobilized ChiA-Nh30, the yield of N-acetyl-D-glucosamine monomers released from 20% (w/v) blue swimming crab residues increased by 3.1 (kaolin) and 2.65 (charcoal) times, respectively.

Microplastic extraction from digestive tracts of large decapods.

The reliable quantification of microplastic contamination in chitinous organisms requires validated methods to remove interfering complex organic and inorganic material. This study trialled KOH, H2O2 and HNO3 digestion methods on the digestive tracts of two large decapods (Panulirus cygnus and Portunus armatus) to validate a protocol that facilitates reliable microplastic extraction. KOH digestion provided the best recovery (>95 %) of all polymers (e.g. polyamide, polyethylene, polyethylene terephthalate, polypropylene, polystyrene and polyvinyl chloride), with the lowest impact to their physical morphology and chemical spectra. While HNO3, and HNO3 + H2O2 treatments were more effective at digesting chitin, they destroyed polyamide, and altered several other polymers. High digestion efficiency did not result in high matrix clarification or high microplastic recovery for large decapods. This study emphasises the importance of validating species-specific microplastic extraction methods, whilst proposing additional post-digestion protocols, such as density separation, for complex samples, that can be applied in future research investigating plastic contamination in large decapods.

Fungal endo and exochitinase production, characterization, and application for Candida biofilm removal.

Chitinases are promising enzymes for a multitude of applications, including chitooligosaccharide (COS) synthesis for food and pharmaceutical uses and marine waste management. Owing to fungal diversity, fungal chitinases may offer alternatives for chitin degradation and industrial applications. The rapid reproduction cycle, inexpensive growth media, and ease of handling of fungi may also contribute to reducing enzyme production costs. Thus, this study aimed to identify fungal species with chitinolytic potential and optimize chitinase production by submerged culture and enzyme characterization using shrimp chitin. Three fungal species, Coriolopsis byrsina, Trichoderma reesei, and Trichoderma harzianum, were selected for chitinase production. The highest endochitinase production was achieved in C. byrsina after 168 h cultivation (0.3 U mL- 1). The optimal temperature for enzyme activity was similar for the three fungal species (up to 45 and 55 ºC for endochitinases and exochitinases, respectively). The effect of pH on activity indicated maximum hydrolysis in acidic pH (4-7). In addition, the crude T. reesei extract showed promising properties for removing Candida albicans biofilms. This study showed the possibility of using shrimp chitin to induce chitinase production and enzymes that can be applied in different industrial sectors.

Antireflective Superhydrophobic and Robust Coating Based on Chitin Nanofibers and Methylsilanized Silica for Outdoor Applications.

Antireflective coatings with superhydrophobicity have many outdoor applications, such as solar photovoltaic panels and windshields. In this study, we fabricated an omnidirectional antireflective and superhydrophobic coating with good mechanical robustness and environmental durability via the spin coating technique. The coating consisted of a layer of phytic acid (PA)/polyacrylamide (PAM)/calcium ions (Ca2+) (referred to as Binder), an antireflective layer composed of chitin nanofibers (ChNFs), and a hydrophobic layer composed of methylsilanized silica (referred to as Mosil). The transmittance of a glass slide with the Binder/ChNFs/Mosil coating had a 5.2% gain at a wavelength of 550 nm, and the antireflective coating showed a water contact angle as high as 160° and a water sliding angle of 8°. The mechanical robustness and environmental durability of the coating, including resistance to peeling, dynamic impact, chemical erosion, ultraviolet (UV) irradiation, and high temperature, were evaluated. The coating retained excellent antireflective capacity and self-cleaning performance in the harsh conditions. The increase in voltage per unit area of a solar panel with a Binder/ChNFs/Mosil coating reached 0.4 mV/cm2 compared to the solar panel exposed to sunlight with an intensity of 54.3 × 103 lx. This work not only demonstrates that ChNFs can be used as raw materials to fabricate antireflective superhydrophobic coatings for outdoor applications but also provides a feasible and efficient approach to do so.

Moving towards fully circular insect production: A focus on insect-derived biowastes.

Over the last decade, commercialization of insects for food and feed has been exponentially increasing. Insect protein is emerging as a sustainable livestock feed and human food alternative due to its low land and carbon footprint. The principles of insect industry are deeply embedded in the core values of sustainability and circular economy. Black soldier fly (BSF) is the crown jewel of insect industry and is one of the most commercially farmed insects. However, this steadfast growth is accompanied by generation of insect based biowaste such as dead flies and pupae exuviae. This will be a major waste fraction from this industry. This study discusses the valorization potential of this waste into chitin (which finds application in cosmetics, bioplastics, and pesticides, among other industries), biogas, fertilizer, and biochar. There is need to conduct more explorative research on value proposition of insect based biowaste to ensure that this industry can comply fully with circular economy and sustainability principles.

Data on annotation and analysis of genome sequence of Paenibacillus elgii YSY-1.2, a promising chitinase-producing, plant-growth-promoting, and biocontrol agent.

The bacterium Paenibacillus elgii YSY-1.2 was recently isolated from soil collected from Yok Don National Park in Vietnam. Previous experiments showed this bacterium possesses high chitin-degrading activity, plant-growth promotion, and biocontrol capacity. Here, we report the draft genome sequence of strain YSY-1.2 for further characterizations related to crop production. The genome sequencing was performed using the DNBSeq-G99 with the Illumina platform. The draft genome of P. elgii YSY-1.2 has 8,240,519 bp in length and comprises 135 contigs. It has an N50 of 315,408 bp and a GC% of 52.8%. The genome contains 7498 protein-coding genes, 87 tRNA genes, and 1 rRNA gene. Among the protein-coding sequences, 6610 were assigned by COG, while 3230 were assigned by KEGG. The genome possesses at least 61 genes involved in environmental adaptation and plant growth promotion. Additionally; there are 258 carbohydrate-active enzymes deduced from the genome; among them, at least 14 may contribute to the biocontrol capacity. The chitin-degrading system of strain YSY-1.2 contains 16 chitinolytic enzymes, comprising 10 chitinases, 4 ß-N-acetylhexosaminidases, and 2 auxiliary activities. Furthermore, 32 gene clusters encoding antimicrobial metabolites were identified from the genome, with 17 showing no sequence similarities to reported clusters. Data provide an insight into the genomic information of strain YSY-1.2 and could lead to valuable further explorations and applications in crop production. This is the first report describing the genome sequence of P. elgii isolated from Vietnam.

Chemical modifications and applications of chitin and chitosan.

This letter emphasizes the potential of chemically modified chitin and chitosan in natural product research. Extracted from crustacean shells, these biopolymers are known for their biocompatibility, biodegradability and non-toxicity. Chemical modifications improve their solubility, adsorption capacity and antimicrobial properties, making them ideal for applications in drug delivery, wound healing and pollutant removal. Furthermore, combining natural products with modified chitosan creates novel therapeutic agents with increased efficacy and fewer side effects. This research highlights the significance of exploring the various applications of chitin and chitosan, aligning with the journal's focus on innovative natural product solutions.

Fabrication of chitin-fibrin hydrogels to construct the 3D artificial extracellular matrix scaffold for vascular regeneration and cardiac tissue engineering.

As the cornerstone of tissue engineering and regeneration medicine research, developing a cost-effective and bionic extracellular matrix (ECM) that can precisely modulate cellular behavior and form functional tissue remains challenging. An artificial ECM combining polysaccharides and fibrillar proteins to mimic the structure and composition of natural ECM provides a promising solution for cardiac tissue regeneration. In this study, we developed a bionic hydrogel scaffold by combining a quaternized ß-chitin derivative (QC) and fibrin-matrigel (FM) in different ratios to mimic a natural ECM. We evaluated the stiffness of those composite hydrogels with different mixing ratios and their effects on the growth of human umbilical vein endothelial cells (HUVECs). The optimal hydrogels, QCFM1 hydrogels were further applied to load HUVECs into nude mice for in vivo angiogenesis. Besides, we encapsulated human pluripotent stem cell-derived cardiomyocytes (hPSC-CMs) into QCFM hydrogels and employed 3D bioprinting to achieve batch fabrication of human-engineered heart tissue (hEHT). Finally, the myocardial structure and electrophysiological function of hEHT were evaluated by immunofluorescence and optical mapping. Designed artificial ECM has a tunable modulus (220-1380 Pa), which determines the different cellular behavior of HUVECs when encapsulated in these. QCFM1 composite hydrogels with optimal stiffness (800 Pa) and porous architecture were finally identified, which could adapt for in vitro cell spreading and in vivo angiogenesis of HUVECs. Moreover, QCFM1 hydrogels were applied in 3D bioprinting successfully to achieve batch fabrication of both ring-shaped and patch-shaped hEHT. These QCFM1 hydrogels-based hEHTs possess organized sarcomeres and advanced function characteristics comparable to reported hEHTs. The chitin-derived hydrogels are first used for cardiac tissue engineering and achieve the batch fabrication of functionalized artificial myocardium. Specifically, these novel QCFM1 hydrogels provided a reliable and economical choice serving as ideal ECM for application in tissue engineering and regeneration medicine.

Metagenome-derived SusD-homologs affiliated with Bacteroidota bind to synthetic polymers.

Starch utilization system (Sus)D-homologs are well known for their carbohydrate-binding capabilities and are part of the sus operon in microorganisms affiliated with the phylum Bacteroidota. Until now, SusD-like proteins have been characterized regarding their affinity toward natural polymers. In this study, three metagenomic SusD homologs (designated SusD1, SusD38489, and SusD70111) were identified and tested with respect to binding to natural and non-natural polymers. SusD1 and SusD38489 are cellulose-binding modules, while SusD70111 preferentially binds chitin. Employing translational fusion proteins with superfolder GFP (sfGFP), pull-down assays, and surface plasmon resonance (SPR) has provided evidence for binding to polyethylene terephthalate (PET) and other synthetic polymers. Structural analysis suggested that a Trp triad might be involved in protein adsorption. Mutation of these residues to Ala resulted in an impaired adsorption to microcrystalline cellulose (MC), but not so to PET and other synthetic polymers. We believe that the characterized SusDs, alongside the methods and considerations presented in this work, will aid further research regarding bioremediation of plastics. IMPORTANCE: SusD1 and SusD38489 can be considered for further applications regarding their putative adsorption toward fossil-fuel based polymers. This is the first time that SusD homologs from the polysaccharide utilization loci (PUL), largely described for the phylum Bacteroidota, are characterized as synthetic polymer-binding proteins.

Dynamics of antibiotic resistance genes and the association with bacterial community during pig manure composting with chitin and glucosamine addition.

In modern ecological systems, the overuse and misuse of antibiotics have escalated the prevalence of antibiotic resistance genes (ARGs) and mobile genetic elements (MGEs), positioning them as emerging environmental contaminants. Notably, composting serves as a sustainable method to recycle agricultural waste into nutrient-rich fertilizer while potentially reducing ARGs and MGEs. This study conducted a 47-day composting experiment using pig manure and corn straw, supplemented with chitin and N-Acetyl-D-glucosamine, to explore the impact of these additives on the dynamics of ARGs and MGEs, and to unravel the interplay between these genetic elements and microbial communities in pig manure composting. Results showed that adding 5% chitin into composting significantly postponed thermophilic phase, yet enhanced the removal efficiency of total ARGs and MGEs by over 20% compared to the control. Additionally, the addition of N-Acetyl-D-glucosamine significantly increased the abundance of tetracycline-resistant and sulfonamide-resistant genes, as well as MGEs. High-throughput sequencing revealed that N-Acetyl-D-glucosamine enhanced bacterial α-diversity, providing diverse hosts for ARGs and MGEs. Resistance mechanisms, predominantly efflux pumps and antibiotic deactivation, played a pivotal role in shaping the resistome of composting process. Co-occurrence network analysis identified the key bacterial phyla Proteobacteria, Firmicutes, Gemmatimonadota, and Myxococcota in ARGs and MGEs transformation and dissemination. Redundancy analysis indicated that physicochemical factors, particularly the carbon-to-nitrogen ratio emerged as critical variables influencing ARGs and MGEs. The findings lay a foundation for the developing microbial regulation method to reduce the risks of ARGs in animal manure composts.

Structural diversification of fungal cell wall in response to the stress signaling and remodeling during fungal pathogenesis.

Fungi are one of the most diverse organisms found in our surroundings. The heterotrophic lifestyle of fungi and the ever-changing external environmental factors pose numerous challenges for their survival. Despite all adversities, fungi continuously develop new survival strategies to secure nutrition and space from their host. During host-pathogen interaction, filamentous phytopathogens in particular, effectively infect their hosts by maintaining polarised growth at the tips of hyphae. The fungal cell wall, being the prime component of host contact, plays a crucial role in fortifying the intracellular environment against the harsh external environment. Structurally, the fungal cell wall is a highly dynamic yet rigid component, responsible for maintaining cellular morphology. Filamentous pathogens actively maintain their dynamic cell wall to compensate rapid growth on the host. Additionally, they secrete effectors to dampen the sophisticated mechanisms of plant defense and initiate various downstream signaling cascades to repair the damage inflicted by the host. Thus, the fungal cell wall serves as a key modulator of fungal pathogenicity. The fungal cell wall with their associated signaling mechanisms emerge as intriguing targets for host immunity. This review comprehensively examines and summarizes the multifaceted findings of various research groups regarding the dynamics of the cell wall in filamentous fungal pathogens during host invasion.

Efficacy and tolerability of chitin-glucan combined with simethicone (GASTRAP® DIRECT) in irritable bowel syndrome: A prospective, open-label, multicenter study.

BACKGROUND: Irritable bowel syndrome (IBS), defined according to the Rome IV diagnostic criteria, is a chronic functional gastrointestinal disorder characterized by recurrent abdominal pain related to altered bowel habits. First-line recommended treatments are limited to combining drugs targeting predominant symptoms, particularly pain (antispasmodics), constipation (laxatives), and diarrhea (loperamide), yielding only a limited therapeutic gain. GASTRAP® DIRECT is a class IIa medical formulation composed of a combination of chitin-glucan and simethicone indicated for the symptomatic treatment of gas-related gastrointestinal disorders by combining different mechanisms of action. AIM: To evaluate the efficacy, tolerability, and safety of 4-week GASTRAP® DIRECT treatment in patients with IBS. METHODS: In this prospective, multicenter, open-label trial, 120 patients with IBS received three sticks of GASTRAP® DIRECT (1.5 g/d of chitin-glucan and 0.75 mg/d of simethicone) per day for 4 weeks. The primary endpoint was the responder rate, defined as the number of patients whose abdominal pain score decreased by ≥ 30% from baseline to week (W) 4. The analysis was performed using the per-protocol set. Cardinal symptoms, impact of global symptoms on daily life, change in stool consistency, and improvement in defecatory disorders were evaluated. RESULTS: Overall, 100 patients were evaluated. At W4, 67% (95%CI: 57-75) showed improvement in abdominal pain (score: 5.8 ± 2.4 vs 2.9 ± 2.0, P < 0.0001). Similar improvements were observed for bloating [8.0 ± 1.7 vs 4.7 ± 2.9, P < 0.0001; 60% (95%CI: 50-70) responders], abdominal distension [7.2 ± 2.1 vs 4.4 ± 3.1, P < 0.0001; 53% (95%CI: 43-63) responders], and impact of global symptoms on daily life [7.1 ± 2.0 vs 4.6 ± 2.9, P < 0.0001; 54% (95%CI: 44-64) responders]. Stool consistency improved in most patients (90% and 57% for patients with liquid and hard stools, respectively). Overall, 42% of patients with defecatory disorders reported very much/considerable improvements by W2. No severe adverse event occurred, and tolerability was rated "good" or "very good" by 93% of patients. CONCLUSION: GASTRAP® DIRECT is safe and well tolerated, alleviating IBS symptoms rapidly in 2 weeks. This open-label study suggests that the combination of chitin-glucan and simethicone could be beneficial in patients with IBS.

Green Foaming of Biologically Extracted Chitin Hydrogels Using Supercritical Carbon Dioxide for Scaffolding of Human Osteoblasts.

Chitin is a structural polysaccharide abundant in the biosphere. Chitin possesses a highly ordered crystalline structure that makes its processing a challenge. In this study, chitin hydrogels and methanogels, prepared by dissolution in calcium chloride/methanol, were subjected to supercritical carbon dioxide (scCO2) to produce porous materials for use as scaffolds for osteoblasts. The control of the morphology, porosity, and physicochemical properties of the produced materials was performed according to the operational conditions, as well as the co-solvent addition. The dissolution of CO2 in methanol co-solvent improved the sorption of the compressed fluid into the hydrogel, rendering highly porous chitin scaffolds. The chitin crystallinity index significantly decreased after processing the hydrogel in supercritical conditions, with a significant effect on its swelling capacity. The use of scCO2 with methanol co-solvent resulted in chitin scaffolds with characteristics adequate to the adhesion and proliferation of osteoblasts.

Dissolving Chitin by Novel Deep Eutectic Solvents for Effectively Enzymatic Hydrolysis.

Chitin is the most productive nitrogen-containing polysaccharide in nature with immense potential for transforming into a range of chemicals. However, its dense crystal structure poses a challenge for depolymerization, limiting its applications. To overcome these challenges, a novel series of deep eutectic solvents (DESs) based on benzyltrimethylammonium chloride (TMBAC) as the hydrogen bond acceptor was developed. These TMBAC-based DESs, in combination with lactic acid, oxalic acid, and malic acid as the hydrogen bond donor demonstrated efficient chitin dissolution, achieving a solubility of up to 12% and an 88% recovery rate of regenerated chitin. The regenerated chitin was characterized using XRD, FT-IR, SEM, and 13C CP-MAS NMR, which indicated the preservation of chitin's chemical structure, a significant decrease in crystallinity, and a reduction in the molecular weight. Furthermore, the enzymatic hydrolysis efficiency of chitin was nearly doubled after treatment with TMBAC-based DESs, surpassing the effectiveness of untreated chitin. This approach holds promise for facilitating subsequent transformation and utilization of chitin.

Marine Bacillus haynesii chitinase: Purification, characterization and antifungal potential for sustainable chitin bioconversion.

The development of chitinase tailored for the bioconversion of chitin to chitin oligosaccharides has attracted significant attention due to its potential to alleviate environmental pollution associated with chemical conversion processes. In this present investigation, we purified extracellular chitinase derived from marine Bacillus haynesii to homogeneity and subsequently characterized it. The molecular weight of BhChi was approximately 35 kDa. BhChi displayed its peak catalytic activity at pH 6.0, with an optimal temperature of 37 °C. It exhibited stability across a pH range of 6.0-9.0. In addition, BhChi showed activation in the presence of Mn2+ with the improved activity of 105 U mL-1. Ca2+ and Fe2+ metal ions did not have any significant impact on enzyme activity. Under the optimized enzymatic conditions, there was a notable enhancement in catalytic activity on colloidal chitin with Km of 0.01 mg mL-1 and Vmax of 5.75 mmol min-1. Kcat and catalytic efficiency were measured at 1.91 s-1 and 191 mL mg-1 s-1, respectively. The product profiling of BhChi using thin layer chromatography and Mass spectrometric techniques hinted an exochitinase mode of action with chitobiose and N-Acetyl glucosamine as the products. This study represents the first report on an exochitinase from Bacillus haynesii. Furthermore, the chitinase showcased promising antifungal properties against key pathogens, Fusarium oxysporum and Penicillium chrysogenum, reinforcing its potential as a potent biocontrol agent.

Powerful cell wall biomass degradation enzymatic system from saprotrophic Aspergillus fumigatus.

Cell wall biomass, Earth's most abundant natural resource, holds significant potential for sustainable biofuel production. Composed of cellulose, hemicellulose, lignin, pectin, and other polymers, the plant cell wall provides essential structural support to diverse organisms in nature. In contrast, non-plant species like insects, crustaceans, and fungi rely on chitin as their primary structural polysaccharide. The saprophytic fungus Aspergillus fumigatus has been widely recognized for its adaptability to various environmental conditions. It achieves this by secreting different cell wall biomass degradation enzymes to obtain essential nutrients. This review compiles a comprehensive collection of cell wall degradation enzymes derived from A. fumigatus, including cellulases, hemicellulases, various chitin degradation enzymes, and other polymer degradation enzymes. Notably, these enzymes exhibit biochemical characteristics such as temperature tolerance or acid adaptability, indicating their potential applications across a spectrum of industries.

Chitin-derived hierarchical meso- and microporous carbon enables high-rate sulfur cathode of sodium-sulfur batteries.

Room temperature Na-S batteries are considered as a promising alternative energy storage system because of their abundant material resources and high theoretical energy density. However, the severe polysulfide shuttle effect and slow reaction kinetics hinder their practical application. Herein, a hierarchical meso- and microporous carbon with nitrogen self-doping (NSPC) is prepared using chitin as the carbon precursor and serves as a novel host to confine the sulfur (S⊂NSPC). An optimized structure of NSPC, including abundant graphite nanocrystals, large pore volume of 1.76 cm3 g-1, and large specific surface area of 2073 m2 g-1 is obtained at the carbonization temperature of 1000 °C. These merits contribute to significantly enhanced charge transfer and ion diffusion of the as-prepared S⊂NSPC-1000 cathode, which exhibits the outstanding sodium storage performance, including high reversible capacities of 1207 mAh g-1 at 0.1 C and 891 mAh g-1 at 2 C and stable cycling with a low capacity decay for 400 cycles at 1 C, among other S⊂NSPC cathodes and previously reported cathodes for Na-S batteries. This cathode can also afford stable cycling at a high sulfur loading.

Hooked on zombie worms? Genetic blueprints of bristle formation in Osedax japonicus (Annelida).

BACKGROUND: This study sheds light on the genetic blueprints of chaetogenesis (bristle formation), a complex biomineralization process essential not only for the diverse group of bristle worms (annelids) but also for other spiralians. We explore the complex genetic mechanisms behind chaetae formation in Osedax japonicus, the bone-devouring deep-sea worm known for its unique ecological niche and morphological adaptations. RESULTS: We characterized the chaetal structure and musculature using electron microscopy and immunohistochemistry, and combined RNAseq of larval stages with in-situ hybridization chain reaction (HCR) to reveal gene expression patterns integral to chaetogenesis. Our findings pinpoint a distinct surge in gene expression during the larval stage of active chaetogenesis, identifying specific genes and cells involved. CONCLUSIONS: Our research underscores the value of studying on non-model, "aberrant" organisms like Osedax, whose unique, temporally restricted chaetogenesis provided insights into elevated gene expression across specific larval stages and led to the identification of genes critical for chaetae formation. The genes identified as directly involved in chaetogenesis lay the groundwork for future comparative studies across Annelida and Spiralia, potentially elucidating the homology of chaetae-like chitinous structures and their evolution.

Carbohydrate-Binding Properties and Antimicrobial and Anticancer Potential of a New Lectin from the Phloem Sap of Cucurbita pepo.

A Cucurbita phloem exudate lectin (CPL) from summer squash (Cucurbita pepo) fruits was isolated and its sugar-binding properties and biological activities were studied. The lectin was purified by affinity chromatography and the hemagglutination assay method was used to determine its pH, heat stability, metal-dependency and sugar specificity. Antimicrobial and anticancer activities were also studied by disc diffusion assays and in vivo and in vitro methods. The molecular weight of CPL was 30 ± 1 KDa and it was stable at different pH (5.0 to 9.0) and temperatures (30 to 60 °C). CPL recovered its hemagglutination activity in the presence of Ca2+. 4-nitrophenyl-α-D-glucopyranoside, lactose, rhamnose and N-acetyl-D-glucosamine strongly inhibited the activity. With an LC50 value of 265 µg/mL, CPL was moderately toxic and exhibited bacteriostatic, bactericidal and antibiofilm activities against different pathogenic bacteria. It also exhibited marked antifungal activity against Aspergillus niger and agglutinated A. flavus spores. In vivo antiproliferative activity against Ehrlich ascites carcinoma (EAC) cells in Swiss albino mice was observed when CPL exerted 36.44% and 66.66% growth inhibition at doses of 3.0 mg/kg/day and 6.0 mg/kg/day, respectively. A 12-day treatment by CPL could reverse their RBC and WBC counts as well as restore the hemoglobin percentage to normal levels. The MTT assay of CPL performed against human breast (MCF-7) and lung (A-549) cancer cell lines showed 29.53% and 18.30% of inhibitory activity at concentrations of 128 and 256 µg/mL, respectively.