High-Efficiency Solar Transformation of Sugars via Heterogeneous Gallium(III) Catalyst.

Extremely limited research exploring the photocatalytic potential of main group metals, such as aluminum, gallium, and tin, has been undertaken due to their weak light harvesting properties. This study reports the efficient transformation of sugars to 5-hydroxymethylfurfural (HMF) with high yield employing an original heterogenous photocatalyst comprising a gallium(III) complex immobilized on an alumina support. Under visible light irradiation, the reaction rate of HMF formation is ~143 times higher than the equivalent thermal reaction performed in the absence of light. The turnover number (TON) the heterogeneous gallium (III) photocatalyst was as high as 1500, which was two orders of magnitude higher than the TON of the homogeneous gallium (III) system. It is proposed that photoirradiation significantly enhances the Lewis acidity of the catalyst by forming a semi-coordination state between gallium(III) and N-donor ligands, enabling the increased interaction of reactant sugar molecules with gallium(III) active sites. Consistent with this, the photoresponsive coordination of the gallium(III) complex and the abstraction of the hydroxy group by the metal under irradiation with visible light is observed by NMR spectroscopy for the first time. These findings demonstrate that efficient photocatalysts derived from the main group elements can facilitate biomass conversion using visible light.

High-gain far-detuned nonlinear frequency conversion in a few-mode graded-index optical fiber.

We present theoretical and experimental evidence of high-gain far-detuned nonlinear frequency conversion, extending towards both the visible and the mid-infrared, in a few-mode graded-index silica fiber pumped at 1.064  µ m , and more specifically achieving gains of hundreds of dB per meter below 0.65  µ m and beyond 3.5  µ m . Interestingly, our findings highlight the potential of graded-index fibers for enabling high-gain wavelength conversion into the strong-loss spectral region of silica. Such advancements require an accurate interpretation of intramodal and intermodal four-wave mixing processes.

The common bisulfite-conversion-based techniques to analyze DNA methylation in human cancers.

DNA methylation is an important molecular modification that plays a key role in the expression of cancer genes. Evaluation of epigenetic changes, hypomethylation and hypermethylation, in specific genes are applied for cancer diagnosis. Numerous studies have concentrated on describing DNA methylation patterns as biomarkers for cancer diagnosis monitoring and predicting response to cancer therapy. Various techniques for detecting DNA methylation status in cancers are based on sodium bisulfite treatment. According to the application of these methods in research and clinical studies, they have a number of advantages and disadvantages. The current review highlights sodium bisulfite treatment-based techniques, as well as, the advantages, drawbacks, and applications of these methods in the evaluation of human cancers.

Ultrafine Aramid Nanofiber-Assisted Large-Area Dense Stacking of MXene Films for Electromagnetic Interference Shielding and Multisource Thermal Conversion.

Polymers are often used as adhesives to improve the mechanical properties of flexible electromagnetic interference (EMI) shielding layered films, but the introduction of these insulating adhesives inevitably reduces the EMI performance. Herein, ultrafine aramid nanofibers (UANF) with a diameter of only 2.44 nm were used as the binder to effectively infiltrate and minimize the insulating gaps in MXene films, for balancing the EMI shielding and mechanical properties. Combining the evaporation-induced scalable assembly assisted by blade coating, flexible large-scale MXene/UANF films with highly aligned and compact MXene stacking are successfully fabricated. Compared with the conventional ANF with a larger diameter of 7.05 nm, the UANF-reinforced MXene film exhibits a "brick-mortar" structure with higher orientation and compacter stacking MXene nanosheets, thus showing the higher mechanical properties, electrical conductivity, and EMI shielding performance. By optimizing MXene content, the MXene/UANF film can achieve the optimal tensile strength of 156.9 MPa, a toughness of 2.9 MJ m-3, satisfactory EMI shielding effectiveness (EMI SE) of 40.7 dB, and specific EMI SE (SSE/t) of 22782.4 dB cm2/g). Moreover, the composite film exhibits multisource thermal conversion functions including Joule heating and photothermal conversion. Therefore, the multifunctional MXene/UANF EMI shielding film with flexibility, foldability, and robust mechanical properties shows the practical potential in complex application environments.

Optimization of a Novel Engineered Ecosystem Integrating Carbon, Nitrogen, Phosphorus, and Sulfur Biotransformation for Saline Wastewater Treatment Using an Interpretable Machine Learning Approach.

The denitrifying sulfur (S) conversion-associated enhanced biological phosphorus removal (DS-EBPR) process for treating saline wastewater is characterized by its unique microbial ecology that integrates carbon (C), nitrogen (N), phosphorus (P), and S biotransformation. However, operational instability arises due to the numerous parameters and intricates bacterial interactions. This study introduces a two-stage interpretable machine learning approach to predict S conversion-driven P removal efficiency and optimize DS-EBPR process. Stage one utilized the XGBoost regression model, achieving an R2 value of 0.948 for predicting sulfate reduction (SR) intensity from anaerobic parameters with feature engineering. Stage two involved the CatBoost classification and regression model integrating anoxic parameters with the predicted SR values for predicting P removal, reaching an accuracy of 94% and an R2 value of 0.93, respectively. This study identified key environmental factors, including SR intensity (20-45 mg S/L), influent P concentration (<9.0 mg P/L), mixed liquor volatile suspended solids (MLVSS)/mixed liquor suspended solids (MLSS) ratio (0.55-0.72), influent C/S ratio (0.5-1.0), anoxic reaction time (5-6 h), and MLSS concentration (>6.50 g/L). A user-friendly graphic interface was developed to facilitate easier optimization and control. This approach streamlines the determination of optimal conditions for enhancing P removal in the DS-EBPR process.

Data-driven sales optimization with regression and chaotic pattern search.

Lead generation is the process of gaining potential customers' interest to increase future sales, and it is an essential part of many businesses' (amusement parks, theme parks, clubs, etc.) sales processes as their membership is more expensive. The main objective of these businesses is to increase the count of customers. By generating sales leads, a club/park can find leads who have already expressed interest in its products and services and access their audience potential, allowing them to focus on future marketing and sales efforts on those leads that are more likely to convert. The current work focuses on how to convert a lead to a customer in optimum number of days. We collect two kinds of data: customer data and lead generation data. The customer data consists of all the leads who have taken the membership, and the lead generation data consists of all current leads. The details of those converted from a lead into a customer in the last 60 days are filtered out from the customer data. Using this data, patterns are generated, which are used to predict the following activity (step) for qualified leads, along with the optimal number of days required to complete that activity. This optimal number of days is found using the Hybrid Chaotic Pattern Search Algorithm (HCPSA). This novel approach here helps in boosting sales by prioritizing leads who have expressed interest and identifying the optimal window for converting them into paying customers. This strategy holds significant potential to benefit businesses across various industries.

Multifunctional Wearable Electronic Based on Fabric Modified by PPy/NiCoAl-LDH for Energy Storage, Electromagnetic Interference Shielding, and Photothermal Conversion.

With the rapid advancement of electronic technology, traditional textiles are challenged to keep up with the demands of wearable electronics. It is anticipated that multifunctional textile-based electronics incorporating energy storage, electromagnetic interference (EMI) shielding, and photothermal conversion are expected to alleviate this problem. Herein, a multifunctional cotton fabric with hierarchical array structure (PPy/NiCoAl-LDH/Cotton) is fabricated by the introduction of NiCoAl-layered double hydroxide (NiCoAl-LDH) nanosheet arrays on cotton fibers, followed by polymerization and growth of continuous dense polypyrrole (PPy) conductive layers. The multifunctional cotton fabric shows a high specific areal capacitance of 754.72 mF cm-2 at 5 mA cm-2 and maintains a long cycling life (80.95% retention after 1000 cycles). The symmetrical supercapacitor assembled with this fabric achieves an energy density of 20.83 Wh cm-2 and a power density of 0.23 mWcm-2. Moreover, the excellent electromagnetic interference shielding (38.83 dB), photothermal conversion (70.2 °C at 1000 mW cm-2), flexibility and durability are also possess by the multifunctional cotton fabric. Such a multifunctional cotton fabric has great potential for using in new energy, smart electronics, and thermal management applications.

P/N-Type Conversion of 2D MoTe2 Controlled by Top Gate Engineering for Logic Circuits.

Two-dimensional (2D) transition-metal dichalcogenides (TMDCs) are regarded as promising materials for next-generation logic circuits. Top gate field-effect transistors (FETs) have independent gate control ability and can be fabricated directly on TMDC materials without a transfer process. Therefore, it has the merits of device reliability and complementary metal-oxide semiconductor (CMOS) process compatibility, which are demanded in practical circuit-level integration. However, the fabrication of the top gate FET involves depositing an insulating dielectric layer and a gate electrode in sequence on the TMDC channel material, which may affect the device performance. Insightfully investigating the influences of different top-gate-deposition methods on the electrical properties of the TMDC channel and further harnessing these influences to realize a homogeneous CMOS device on an identical 2D TMDC platform are with practice significance. In this work, p/n-type controllable top gate FET arrays based on 2H-MoTe2 are fabricated by using different top-gate-deposition methods. The electron-beam evaporation (EBE) of top metal gate exhibits an obvious n-doping effect on the 2H-MoTe2 channel and converts it from p-type to n-type, whereas the thermal evaporation of top gate affects little to the channel. High-resolution transmission electron microscopy (HR-TEM) analysis reveals that the high-energy metal atoms from the EBE process can penetrate through the 30 nm gate dielectric layers (including 10 nm Al2O3 seeding layer), leading to multiple atomic defects in both MoTe2 and the interface between MoTe2 and Al2O3. Furthermore, by utilizing the top gate engineering, a large-scale double-top-gate MoTe2 homogeneous CMOS inverter array is fabricated. The CMOS inverters exhibit clear logic swing, negligible hysteresis, and high device yield (∼93%), indicating high device reliability and stability. Notably, the fabrication process is facile, free from transfer procedure, and compatible with traditional silicon technology. This work promotes the application of 2D TMDCs in nanoelectronics integration.

Origin of O2 Generation in Sulfide-Based All-Solid-State Batteries and its Impact on High Energy Density.

The cathode surface of sulfide-based all-solid-state batteries (SBs) is commonly coated with amorphous-LiNbO3 in order to stabilize charge-discharge reactions. However, high-voltage charging diminishes the advantages, which is caused by problems with the amorphous-LiNbO3 coating layer. This study has investigated the degradation of amorphous-LiNbO3 coating layer directly during the high-voltage charging of SBs. O2 generation via Li extraction from the amorphous-LiNbO3 coating layer is observed using electrochemical gas analysis and electrochemical X-ray photoelectron spectroscopy. This O2 leads to the formation of an oxidative solid electrolyte (SE) around the coating layer and degrades the battery performance. On the other hand, elemental substitution (i.e., amorphous-LiNbxP1- xO3) reduces O2 release, leading to stable high-voltage charge-discharge reactions of SBs. The results have emphasized that the suppression of O2 generation is a key factor in improving the energy density of SBs.

Nanoarchitectonics in Advanced Membranes for Enhanced Osmotic Energy Harvesting.

Osmotic energy, often referred to as "blue energy", is the energy generated from the mixing of solutions with different salt concentrations, offering a vast, renewable, and environmentally friendly energy resource. The efficacy of osmotic power production considerably relies on the performance of the transmembrane process, which depends on ionic conductivity and the capability to differentiate between positive and negative ions. Recent advancements have led to the development of membrane materials featuring precisely tailored ion transport nanochannels, enabling high-efficiency osmotic energy harvesting. In this review, ion diffusion in confined nanochannels and the rational design and optimization of membrane architecture are explored. Furthermore, structural optimization of the membrane to mitigate transport resistance and the concentration polarization effect for enhancing osmotic energy harvesting is highlighted. Finally, an outlook on the challenges that lie ahead is provided, and the potential applications of osmotic energy conversion are outlined. This review offers a comprehensive viewpoint on the evolving prospects of osmotic energy conversion.

Hydrological dynamics in the China-Mongolia arid region: An integrated analysis of precipitation recycling and water vapor conversion.

This study examines the atmospheric water cycle dynamics in the China-Mongolia Arid Region (CMAR), a region significantly affected by aridity. By employing a combination of Empirical Orthogonal Function (EOF) analysis, ERA5 reanalysis data, and the Dynamic Recycling Model (DRM), we investigate the spatial and temporal variations in the Precipitation Recycling Ratio (PRR) and Precipitable Water Conversion Rate (PWCR) over a forty-year period (1979-2021). Our findings reveal that both PRR and PWCR are generally higher but decreasing in most subregions of CMAR, suggesting a notable contribution of local moisture to precipitation. We also identify an increasing trend in PRR across the northwestern subregions and a decreasing trend in other areas. Similarly, PWCR exhibits an increasing trend in the northwestern and southern subregions, while decreasing elsewhere, implying a decline in water vapor conversion and recycling efficiency. Furthermore, our EOF analysis uncovers distinct spatial patterns, with dominant modes accounting for significant variances in PRR and PWCR, correlating with local variations in atmospheric moisture and advective changes. These results underscore the complex interplay between regional topography, atmospheric dynamics, and the hydrological cycle in CMAR. The insights from this study are vital for formulating effective water management strategies and adapting to climate change impacts in arid regions, holding broad implications for environmental science, climate studies, and sustainable resource management. Our findings reveal distinct spatial patterns and contrasting trends in precipitation recycling and water vapor conversion across the subregions of CMAR. This heterogeneity underscores the importance of conducting analyses at finer spatial scales to avoid contradictory conclusions that can arise from topographic influences when treating CMAR as a single unit. Future studies should focus on smaller subregions to accurately capture the intricacies of the water cycle in this topographically complex arid region.

Comparison of immunochemotherapy and chemotherapy alone in conversion therapy for locally advanced unresectable esophageal squamous cell carcinoma.

Background: The clinical value of preoperative immunochemotherapy and simple chemotherapy induction regimen in the conversion therapy of locally advanced unresectable esophageal squamous cell carcinoma (ESCC) is still unclear. Method: Retrospective analysis was conducted on patients with unresectable cT4b stage ESCC who underwent conversion surgery in our hospital from January 2020 to December 2022. According to the preoperative induction treatment plan, they were divided into induction immunochemotherapy group (iICT group) and induction chemotherapy group (iCT group). The conversion surgery rate, R0 resection rate, radiological and pathological tumor responses, safety, and short-term survival outcomes were analyzed. Results: The results showed that a total of 199 patients with cT4b locally advanced unresectable ESCC who underwent preoperative induction therapy were included in this study. Among them, there were 64 cases (32.2%) in the iICT group, 135 cases (67.8%) in the iCT group. There was a statistically significant difference in objective response rate (73.5% vs 48.9%) and conversion surgery rate (81.3% vs 66.7%), between the iICT and iCT groups (P=0.001 and P=0.019). Among the two groups of patients who underwent surgery, there were statistically significant differences in R0 resection rate (94.2% vs 82.2%) and pathological complete remission rate (23.1% vs 6.7%) between the iICT and iCT groups (P=0.043 and P=0.004). And there was no statistically significant difference in the incidence of grade 3 and above between two groups (P=0.928). The 2-year EFS of the iICT group and iCT group were 76.4% and 42.4%, respectively, with statistically significant differences (P=0.006). Conclusions: Compared with simple chemotherapy, the combination of PD-1 inhibitors and chemotherapy can achieve better conversion surgery rate, tumor response and event-free survival in the conversion therapy of locally advanced unresectable ESCC.

Highly Reversible Sodium-ion Storage in A Bifunctional Nanoreactor Based on Single-atom Mn Supported on N-doped Carbon over MoS2 Nanosheets.

Conversion-type electrode materials have gained massive research attention in sodium-ion batteries (SIBs), but their limited reversibility hampers practical use. Herein, we report a bifunctional nanoreactor to boost highly reversible sodium-ion storage, wherein a record-high reversible degree of 85.65% is achieved for MoS2 anodes. Composed of nitrogen-doped carbon-supported single atom Mn (NC-SAMn), this bifunctional nanoreactor concurrently confines active materials spatially and catalyzes reaction kinetics. In-situ/ex-situ characterizations including spectroscopy, microscopy, and electrochemistry, combined with theoretical simulations containing density functional theory and molecular dynamics, confirm that the NC-SAMn nanoreactors facilitate the electron/ion transfer, promote the distribution and interconnection of discharging products (Na2S/Mo), and reduce the Na2S decomposition barrier.As a result, the nanoreactor-promoted MoS2 anodes exhibit ultra-stable cycling with a capacity retention of 99.86% after 200 cycles in the full cell. This work demonstrates the superiority of bifunctional nanoreactors with two-dimensional confined and catalytic effects, providing a feasible approach to improve the reversibility for a wide range of conversion-type electrode materials, thereby enhancing the application potential for long-cycled SIBs.

Psychodynamic psychotherapy for gender dysphoria is not conversion therapy.

Over the last ten years, there has been a substantial increase in the number of children and adolescents referred to gender clinics for possible gender dysphoria. The gender affirming model of care, a dominant treatment approach in Canada, is based on low quality evidence. Other countries are realizing this and making psychosocial treatments and/or exploratory psychotherapy a first line of treatment for gender related distress in young patients. Psychodynamic (exploratory) psychotherapy has established efficacy for a range of conditions, and has been used in youth and adults with gender dysphoria. In Canada, the adoption of psychodynamic psychotherapy for gender dysphoria is impeded by some academics who argue that it may violate laws against conversion therapy. Psychodynamic psychotherapy is not conversion therapy and should be made available in Canada as a treatment modality for gender dysphoria.

Membraneless Electrochemical Synthesis Strategy toward Nitrate-to-Ammonia Conversion.

Electroreduction of nitrate (NO3RR) to ammonia in membraneless electrolyzers is of great significance for reducing the cost and saving energy consumption. However, severe chemical crossover with side reactions makes it challenging to achieve ideal electrolysis. Herein, we propose a general strategy for efficient membraneless ammonia synthesis by screening NO3RR catalysts with inferior oxygen reduction activity and matching the counter electrode (CE) with good oxygen evolution activity while blocking anodic ammonia oxidation. Consequently, screening the available Co-Co system, the membraneless NO3--to-NH3 conversion performance was significantly higher than H-type cells using costly proton-exchange membranes. At 200 mA cm-2, the full-cell voltage of the membraneless system (∼2.5 V) is 4 V lower than that of the membrane system (∼6.5 V), and the savings are 61.4 kW h (or 56.9%) per 1 kg NH3 produced. A well-designed pulse process, inducing reversible surface reconstruction that in situ generates and restores the active Co(III) species at the working electrode and forms favorable Co3O4/CoOOH at the CE, further significantly improves NO3--to-NH3 conversion and blocks side reactions. A maximum NH3 yield rate of 1500.9 µmol cm-2 h-1 was achieved at -0.9 V (Faraday efficiency 92.6%). This pulse-coupled membraneless strategy provides new insights into design complex electrochemical synthesis.

Conversion or reversion of interferon gamma release assays for Mycobacterium tuberculosis infection: a systematic review and meta-analysis.

BACKGROUND: Interferon-gamma release assays (IGRA) are widely used for diagnosis of latent tuberculosis infection. However, with repeat testing, IGRA transformation (conversion or reversion) may be detected and is challenging to interpret. We reviewed the frequency of and risk factors for IGRA transformation. METHODS: We screened public databases for studies of human participants that reported the frequency of IGRA transformation. We extracted study and subject characteristics, details of IGRA testing and results. We calculated the pooled frequency of IGRA transformation (and transient transformation) and examined associated risk factors. RESULTS: The pooled frequency of IGRA conversion or reversion from 244 studies was estimated at 7.3% (95% CI 6.1-8.5%) or 22.8% (20.1-25.7%), respectively. Transient conversion or reversion were estimated at 46.0% (35.7-56.4%) or 19.6% (9.2-31.7%) of conversion or reversion events respectively. Indeterminate results seldom reverted to positive (1.2% [0.1-3.5%]). IGRA results in the borderline positive or negative range were associated with increased risk of conversion or reversion (pooled OR: conversion, 4.15 [3.00-5.30]; reversion, 4.06 [3.07-5.06]). BCG vaccination was associated with decreased risk of conversion (0.70, 0.56-0.84), cigarette smoking with decreased risk of reversion (0.44, 0.06-0.82), and female sex with decreased risk of either conversion or reversion (conversion, 0.66 [0.58-0.75]; reversion, 0.46 [0.31-0.61]). CONCLUSIONS: IGRA conversion is less common than reversion, and frequently transient. Research is needed to determine whether individuals with reversion would benefit from tuberculosis preventive treatment. Re-testing of people with indeterminate results is probably not indicated, since indeterminate results seldom revert to positive.

KOH-activated hollow carbon spheres with surface functionalization for high-capacity and long-cycle-life lithium-selenium batteries.

Lithium-selenium (Li-Se) batteries are considered promising alternatives to lithium-ion batteries due to their higher volumetric capacity and energy density. However, they still face limitations in efficiently utilizing the active selenium. Here, we develop surface-functionalized mesoporous hollow carbon nanospheres as the selenium host. By using KOH activation, the surface of the carbon nanospheres is functionalized with hydroxyl groups, which greatly improve the utilization of selenium and facilitate the conversion of lithium selenides, leading to much higher capacities compared to ZnCl2 activation and untreated carbon nanospheres. Theory and experimental evidence suggest that surface hydroxyl groups can enhance the reduction conversion of polyselenides to selenides and facilitate the oxidation reaction of selenides to elemental selenium. In-situ and ex-situ characterization techniques provided additional confirmation of the hydroxyl groups electrochemical durability in catalyzing selenium conversion. The meticulously engineered Se cathode demonstrates a high specific capacity of 594 mA h g-1 at 0.5C, excellent rate capability of 464 mA h g-1 at 2C, and a stable cycling performance of 500 cycles at 2C with a capacity retention of 84.8 %, corresponding to an ultra-low-capacity decay rate of 0.0144 % per cycle, surpassing many reported lithium-selenium battery technologies.

In vivo detection of Alzheimer's and Lewy body disease concurrence: Clinical implications and future perspectives.

INTRODUCTION: The recent introduction of seed amplification assays (SAAs) detecting misfolded α-synuclein, a pathology-specific marker for Lewy body disease (LBD), has allowed the in vivo identification and phenotypic characterization of patients with co-occurring Alzheimer's disease (AD) and LBD since the early clinical or even preclinical stage. METHODS: We reviewed studies with an in vivo biomarker-based diagnosis of AD-LBD copathology. RESULTS: Studies in large cohorts of cognitively impaired individuals have shown that cerebrospinal fluid (CSF) biomarkers detect the coexistence of AD and LB pathology in approximately 20%-25% of them, independently of the primary clinical diagnosis. Compared to those with pure AD, AD-LBD patients showed worse global cognition, especially in attentive/executive and visuospatial functions, and worse motor functions. In cognitively unimpaired individuals, concurrent AD-LBD pathologies predicted longitudinal cognitive progression with faster worsening of global cognition, memory, and attentive/executive functions. DISCUSSION: Future research studies aiming for a better precision medicine approach should develop SAAs further to reach a quantitative evaluation or staging of each underlying pathology using a single biofluid sample. HIGHLIGHTS: α-Synuclein seed amplification assays (SAAs) provide a specific marker for Lewy body disease (LBD). SAAs allow for the in vivo identification of co-occurring LBD in patients with Alzheimer's disease (AD). AD-LBD coexist in 20-25% of cognitively impaired elderly individuals, and ∼8% of those asymptomatic. Compared to pure AD, AD-LBD causes a faster worsening of cognitive functions. AD-LBD is associated with worse attentive/executive, memory, visuospatial and motor functions.

Covalent Organic Frameworks for Electrocatalysis：Design, Applications, and Perspectives.

Covalent organic frameworks (COFs) are an innovative class of crystalline porous polymers composed of light elements such as C, N, O, etc., linked by covalent bonds. The distinctive properties of COFs, including designable building blocks, large specific surface area, tunable pore size, abundant active sites, and remarkable stability, have led their widespread applications in electrocatalysis. In recent years, COF-based electrocatalysts have made remarkable progress in various electrocatalytic fields, including the hydrogen evolution reaction, oxygen evolution reaction, oxygen reduction reaction, nitrogen reduction reaction, nitrate reduction reaction, and carbon dioxide reduction reaction. This review begins with an introduction to the design and synthesis strategies employed for COF-based electrocatalysts. These strategies include heteroatom doping, metalation of COF and building monomers, encapsulation of active sites within COF pores, and the development of COF-based derived materials. Subsequently, a systematic overview of the recent advancements in the application of COF-based catalysts in electrocatalysis is presented. Finally, the review discusses the main challenges and outlines possible avenues for the future development of COF-based electrocatalysts.