Forensic evaluation of craniometric characteristics of the Kazakhstan population.

Background: The human skull is the part of the skeleton most frequently used in population studies, as it was more exposed to genetic factors and less exposed to environmental factors. The skull is an important component in human forensic identification. Materials and methods: The craniometric characteristics of 186 male and 114 female skulls found on the territory of Kazakhstan were studied. Dimensions were measured using standard anthropometric methods and instruments. The results of measurements of 25 craniometric parameters are presented. Methods of descriptive and parametric statistics were used. Results: Statistical analysis showed significant regional dimorphism, confirming theindividuality of the Kazakhstan population. Statistically significant deviations werefound in 6 male craniometric characteristics and 4 female craniometric characteristics(p<0.05). The most dimorphous variables for regional identification in Kazakhstanmales were the higher skull base and frontal chord width , full face height , condylarand bigonial width , and low mandibular body reference values (p<0.05). For females,significant statistical discrepancies were seen in the transverse diameter and skullbase width, mastoid and occipital aperture width (p<0.05). Conclusion: The recorded variations and changes in the morphology of the humanskull of the population of Kazakhstan indicate the need to develop and updateosteometric standards used in practice for specific populations. All this will significantlyimprove the accuracy of forensic identification and more fully study the biologicalpatterns of population formation, as well as evaluate the comparative effectiveness ofindividual features in the reconstruction of the population history of various populationgroups.

Southern Africa's Great Escarpment as an amphitheater of climate-driven diversification and a buffer against future climate change in bats.

Hosting 1460 plant and 126 vertebrate endemic species, the Great Escarpment (hereafter, Escarpment) forms a semi-circular "amphitheater" of mountains girdling southern Africa from arid west to temperate east. Since arid and temperate biota are usually studied separately, earlier studies overlooked the biogeographical importance of the Escarpment as a whole. Bats disperse more widely than other mammalian taxa, with related species and intraspecific lineages occupying both arid and temperate highlands of the Escarpment, providing an excellent model to address this knowledge gap. We investigated patterns of speciation and micro-endemism from modeled past, present, and future distributions in six clades of southern African bats from three families (Rhinolophidae, Cistugidae, and Vespertilionidae) having different crown ages (Pleistocene to Miocene) and biome affiliations (temperate to arid). We estimated mtDNA relaxed clock dates of key divergence events across the six clades in relation both to biogeographical features and patterns of phenotypic variation in crania, bacula and echolocation calls. In horseshoe bats (Rhinolophidae), both the western and eastern "arms" of the Escarpment have facilitated dispersals from the Afrotropics into southern Africa. Pleistocene and pre-Pleistocene "species pumps" and temperate refugia explained observed patterns of speciation, intraspecific divergence and, in two cases, mtDNA introgression. The Maloti-Drakensberg is a center of micro-endemism for bats, housing three newly described or undescribed species. Vicariance across biogeographic barriers gave rise to 29 micro-endemic species and intraspecific lineages whose distributions were congruent with those identified in other phytogeographic and zoogeographic studies. Although Köppen-Geiger climate models predict a widespread replacement of current temperate ecosystems in southern Africa by tropical or arid ecosystems by 2070-2100, future climate Maxent models for 13 bat species (all but one of those analyzed above) showed minimal range changes in temperate species from the eastern Escarpment by 2070, possibly due to the buffering effect of mountains to climate change.

Morphometric analysis of the skulls of a ram and ewe Romanov sheep (Ovis aries) with 3D modelling.

BACKGROUND: With the development of technology, 2D images have left their place for 3D models. The 3D modelling technique is widely used in plastic surgery, orthopaedic surgery, neurosurgery, traumatology, dentistry and medical education. The skull is important in terms of containing the starting parts of systems with vital functions. OBJECTIVE: The aim of the study is to reveal the difference between male and female and other species by 3D (three-dimensional) modelling and craniometric measurements of Romanov heads. METHODS: In our study, skulls of Romanov sheep (10 females and 10 males) older than 1-year-old were used. The heads of Romanov sheep were scanned with computed tomography and modelled in 3D. RESULTS AND CONCLUSIONS: In the study, it was determined that there was a statistically significant difference between male and female sheep in terms of the largest nose length, facial width, molar row length, viscerocranium length, and foramen magnum height parameters (p < 0.05). It was determined that the greatest width of the foramen magnum measurement parameter and the skull index showed statistically significant differences between the genders at the p < 0.01 level. No statistically significant difference was found in other measurements (p > 0.05). The data obtained as a result of the study will help in the racial discrimination and classification of bones obtained from zoo archaeological excavations.

Evaluation of Craniometric Parameters and Efficacy of Posterior Surgical Intervention Types in Basilar Invagination Patients.

OBJECTIVE: Basilar invagination is one of the most frequently observed abnormalities at the craniovertebral junction, in which the odontoid process of C2 prolapses into the foramen magnum. METHODS: The current study included 27 patients who underwent surgery for basilar invagination between October 2013 and January 2023. The study group was divided into 2 groups according to basilar invagination types; type I (the presence of type A atlantoaxial instability and instability is the main pathology) and type II (the presence of type B and C atlantoaxial instability and skull base dysgenesis is the main pathology). Craniometric parameters included in the study were atlantodental interval, posterior atlantodental interval, Chamberlain's line violation, clivus-canal angle, Welcher's basal angle, and Boogaard angle. RESULTS: The mean age of the patients was 24.30 ± 14.36 years (5-57 years). Fourteen patients (51.9%) were female, and 13 patients (48.1%) were male. Ten patients (37%) had type I basilar invagination, and 17 patients (63%) had type II basilar invagination. Preoperative and postoperative atlantodental interval and Boogaard angle were significantly higher in type I basilar invagination, as preoperative and postoperative posterior atlantodental interval and clivus-canal angle were significantly higher in type II basilar invagination. There was a positive strong correlation between Chamberlain's line violation and Boogaard angle. Postoperative Chamberlain's line violation was significantly higher in occipitocervical fixation (P = 0.035). C1 lateral mass screw fixation was found more successful in Chamberlain's line violation correction than occipital plates. Occipitocervical fixation was found to be associated with higher postoperative Nurick scores (P = 0.015) and complication rates (P = 0.020). Cages applied to the C1-C2 joint space were found to be associated with higher fusion rates (P = 0.023) and lower complication rates (P = 0.024). CONCLUSIONS: In the present study, it was found that C1-C2 fixation was more successful in correcting craniometric parameters and had lower complication rates than occipitocervical fixation. In appropriate patients, it was determined that cage application increased the success rates of the operations.

Augmented Reality Registration System for Visualization of Skull Landmarks.

BACKGROUND: Augmented reality (AR) is an emerging technology in neurosurgery with the potential to become a strategic tool in the delivery of care and education for trainees. Advances in technology have demonstrated promising use for improving visualization and spatial awareness of critical neuroanatomic structures. In this report, we employ a novel AR registration system for the visualization and targeting of skull landmarks. METHODS: A markerless AR system was used to register 3-dimensional reconstructions of suture lines onto the head via a head-mounted display. Participants were required to identify craniometric points with and without AR assistance. Targeting error was measured as the Euclidian distance between the user-defined location and the true craniometric point on the subjects' heads. RESULTS: All participants successfully registered 3-dimensional reconstructions onto the subjects' heads. Targeting accuracy was significantly improved with AR (3.59 ± 1.29 mm). Across all target points, AR increased accuracy by an average of 19.96 ± 3.80 mm. Posttest surveys revealed that participants felt the technology increased their confidence in identifying landmarks (4.6/5) and that the technology will be useful for clinical care (4.2/5). CONCLUSIONS: While several areas of improvement and innovation can further enhance the use of AR in neurosurgery, this report demonstrates the feasibility of a markerless headset-based AR system for visualizing craniometric points on the skull. As the technology continues to advance, AR is expected to play an increasingly significant role in neurosurgery, transforming how surgeries are performed and improving patient care.

[Lower jawbone structures symmetry evaluation using cone beam computed tomography]. / Otsenka simmetrichnosti kostnykh struktur nizhnei chelyusti po dannym konusno-luchevoi komp'yuternoi tomografii.

OBJECTIVE: To assess the prevalence and quantitative characteristics of skeletal asymmetries of the body and lower jaw branches in three-dimensional space. MATERIALS AND METHODS: Using depersonalized data archive, of 400 CBCT scans, forty studies were picked randomly. Patients aged 25 to 35 years participated in research, no history of maxillofacial reconstructive surgery; gender, race, and facial anomaly were ignored. Three experienced doctors, independently, identified 15 reference points on radiographic images of AUTOPLAN software. Expert consensus found in the orientation determination. Six planes and eight points were constructed, using Math algorithms and the Python OOP; body and branches of the lower jaw length measurements performed and processed automatically. RESULTS: The study identified symmetry, using a method for determining parameters of the lower jaw in 3D space (Priority Reference No.2023100466 at 10.01.2023), modern dentistry research method. Both sides of data obtained shown asymmetry of the body and branches of the lower jaw occurred in 45% (18 people) and 67.5% (27 people) of cases. Forty percent of cases were noted with Mild asymmetry of the lower jaw body (16 people), moderate asymmetry noted in 5% (2 people). These parameters were 57.5% for branches, (23 people) and 10% (4 people). Combined form of anomaly observed in 37.5% (15 people) of cases, among which 12 people (75%) showed adaptive compensation of anomalies, which requires further investigation on a larger number of patients. CONCLUSION: Lower body jaw asymmetry is prevalent (80%). Patients with moderate and serious anomaly form appeared in 15% of cases.

Human genetics and molecular genomics of Chiari malformation type 1.

Chiari malformation type 1 (CM1) is the most common structural brain disorder involving the craniocervical junction, characterized by caudal displacement of the cerebellar tonsils below the foramen magnum into the spinal canal. Despite the heterogeneity of CM1, its poorly understood patho-etiology has led to a 'one-size-fits-all' surgical approach, with predictably high rates of morbidity and treatment failure. In this review we present multiplex CM1 families, associated Mendelian syndromes, and candidate genes from recent whole exome sequencing (WES) and other genetic studies that suggest a significant genetic contribution from inherited and de novo germline variants impacting transcription regulation, craniovertebral osteogenesis, and embryonic developmental signaling. We suggest that more extensive WES may identify clinically relevant, genetically defined CM1 subtypes distinguished by unique neuroradiographic and neurophysiological endophenotypes.

Radiological examination of the skull of Siirt-coloured mohair goat, Romanov and Hamdani sheep.

The skull is a vitally important complex structure formed by the combination of many bones. Craniometric studies are performed with various imaging methods to determine morphometric characteristics in animals. One of these methods is radiography. In our study, skulls of 14 Hamdani sheep, 20 Siirt-coloured mohair goats and 20 Romanov sheep breeds were used. Skull sections were taken with a computed tomography device and saved in DICOM format. Nine separate measurements and six index calculations were made from the images. In the study, firstly, the gender difference was ignored and the similarities and differences between the species were recorded. In addition, gender differences were determined statistically, without making any distinction between species. Correlation analysis was performed to compare measurement parameters between animal species. As a result of the study, the highest skull length (SL) and cranial length (CL) values were determined in the Siirt-coloured mohair goat. It was determined that the difference between Romanov sheep and Siirt-coloured mohair goat in CL parameter was not statistically significant (p > 0.05). In addition, a statistically significant difference was observed between the Romanov sheep breed and the Hamdani sheep breed (p < 0.01). The external length of the cranium (ELC) measurement parameter was found to have a statistically significant difference in three animals (p < 0.01). According to the results of the correlation analysis, the highest correlation value was determined between cranial width (CW) and CL parameters (r = 0.920). When the species difference was ignored, and the statistical difference of the internal height of the cranium (IHC) parameter was found to be significant between female and male animals (p < 0.05). In addition, it was determined that SL, CW and internal cranium index (ICI) parameters had a significant difference depending on sex (p < 0.01). It is foreseen that the obtained data can be used in sciences such as zoo archaeology, anatomy, surgery and forensic medicine.

[Craniometric aspects in forensic medical identification of the Kazakhstan population]. / Kraniometricheskie aspekty sudebno-meditsinskoi identifikatsii naseleniya Kazakhstana.

The aim of this study is to estimate the variability limits of craniometric skull parameters, revealed in Kazakhstan, and find out significant criteria for forensic medical identification of the local population. The investigation included 25 standard craniometric skull parameters, revealed in Kazakhstan. Standard antropometric tests and tools were used. Current study confirm that the craniometrics indicators of Kazakhstan population have specific regional features. The skulls, revealed in Kazakhstan, are well craniometrically differentiated. Statistically significant differences were found out in 6 craniometric parameters in men (width of skull base, frontal chord, full face height, condylar and bigonial width, mandibular height) and in 4 parameters in women (transverse diameter, width of skull base, mastoid width, width of occipital foramen). The usage of updated data according to the regional features of the craniometrics parameters allow to significantly improve the forensic identification accuracy, study more completely the biological regularities of population formation and assess the comparative efficacy of individual features in the population reconstructions.

Algorithms for the management of frontal sinus fractures: A retrospective study.

The aim of this study was to evaluate the long-term results and to evaluate the validity of the treatment algorithm that can be safely applied in dfrontal sinus fractures. All patients were evaluated in terms of late-term contour deformity and further craniometric analysis for measurement of maximum amount of displacement, fracture surface area (mm2) and the maximum angulation of the fracture (degree) were done. 125 patients (101 male, 24 female) with frontal sinus fractures with an average age of 22.4 years (range,17-66 years) were reviewed. All patients with isolated anterior table fractures without displacement were followed up on conservative basis. 33 patients with anterior table fractures with displacement and 39 patients with anterior and posterior table fractures were also followed on conservative basis without surgical intervention. The cut-off value of the maximum amount of displacement was confirmed to be 4.5 mm in prediction of late-term contour deformities (p < 0.001). The maximum amount of displacement was decreased by an average of 1.8 mm at late-term. Apart from the standard protocols, within the limitations of the study it seems that isolated anterior table fractures with a maximum amount of displacement of less than 4.5 mm can be treated conservatively without leading to contour deformities. CSF leakage in the acute setting might not always require cranialization and this may spontaneously resolve within 10 days. Cranialization should be considered whenever CSF leakage lasts longer than 10 days.

Comparative craniometric measurements of two Canid species in Egypt: the Egyptian red fox and the Egyptian Baladi dog.

The Egyptian red fox (Vulpes vulpes aegyptiaca) and Egyptian Baladi dog (Canis familiaris) are two members of the Family Canidae that are widely distributed in Egypt. The skulls of different Canid species vary greatly in their size and shape; therefore, they can be used as a tool to study the evolution and evolutionary history of these animals. The craniometric measurements are crucial for species identification and determination of the specific sites for nerve blocks. The present study compared the craniometric measurements of the red fox and Baladi dog skulls by measuring 47 parameters on each skull and calculation of 8 indices. The red fox skull had significantly lower values of 41 craniometric measurements (approximately 87% of the measurements done), including skull length, width, and height, cranial length and width, palatal and mandibular length, and dental measurements. In contrast, the red fox had significantly higher values of only 3 measurements (approximately 6% of the measurements done) including the tympanic bulla measurement. While only three skull measurements did not differ significantly between the red fox and dog. Statistics revealed that domestic dog had significantly higher values of foramen magnum and palatine indices, and significantly lower value of nasal index than those of red fox. The present work reported variations in the gross and craniometric measurements of skull between the red fox and dog. The measured cranial parameters of both adult animals provide valuable information that can be used in ecological studies, comparative anatomy, and clinical veterinary sciences.

A preliminary study to quantify the efficacy of 3D data acquisition for human bone replication.

BACKGROUND: Three-dimensional imaging is a rapidly growing technology that has revealed exciting insights in disparate fields of research, especially in medicine, forensics, and archaeology. Recent advancements in this technology have also made a remarkable impact in the field of anthropology and odontology. A major benefit of this technology is that they offer effective methods of creating digital records that can aid in physical documentation and can be digitally stored for later assessment and research. AIM: The aim of the current study is to evaluate the metric accuracy of 3D models generated using three different 3D acquisition techniques for performing metric analytical procedures. MATERIALS AND METHOD: Twenty standard craniometric linear measurements (using both sliding and spreading callipers) were taken on two craniums and eight standard measurements were taken on 2 mandibles (using sliding callipers and a mandibulometer); these measurements were then replicated on 3D digital models. RESULTS: Statistical analysis of these dataset using Analysis of Variance (ANOVA) and post hoc Bonferroni test suggested that the physical and virtual measurements were accurate, comparable, and concordant (p > 0.05). CONCLUSION: These findings open up numerous avenues for future study, especially in the fields of forensics and clinical studies. However, in order to overcome the limitations faced in using the digital method certain standardised protocols and guidelines must be established to record these data.

Craniometric Measurements and Surgical Outcomes in Trigonocephaly Patients Who Underwent Surgical Treatment.

Objective The aim of this study was to discuss the results of craniometric measurements and surgical treatments in patients operated for isolated trigonocephaly (TC) in light of the current literature. Methods A total of 18 cases who underwent surgery for isolated TC were included in the study. Age, gender, family history, follow-up time, complications, duration of surgery, surgical blood loss, and amount of blood replacement in these patients were recorded. Craniometric measurements such as metopic angle (MA), cephalic index (CI), interparietal distance (IPD), intercoronal distance (ICD), and their ratio to each other were evaluated according to pre-and postoperative parameters. Photographs of the patients were taken before and after the operation. The Whitaker classification and Kampf "aesthetic outcome staging" were used in the evaluations. Results The mean MA values after the operation increased to reach above 147 degrees in all cases. The average CI did not change. ICD measurement averages increased significantly. The average IPD/ICD ratio decreased due to the increase in ICD and the enlargement of the anterior fossa after the operation. According to the Whitaker classification and Kampf "aesthetic outcome staging" scale, 17 of our cases were at stage I, rated as perfect, and one was at stage II, rated as good. Conclusion Surgery performed at the appropriate time for TC yields cosmetically satisfactory results. Since potential neurological and cognitive morbidities occur mostly in school-age patients, long-term follow-up of the cases is required. Performing craniometric measurements enables patients to be evaluated with objective and measurable numerical data.

Can Craniometry Play a Role in Cluster Headache Diagnosis? A Pilot Exploratory TC-3D Based Study.

BACKGROUND: Since the pioneering reports of the so-called leonine face in cluster headache (CH) patients, cranial and facial features of these patients have been poorly investigated with conflicting results. We aimed to investigate whether abnormalities in craniometric measurements could characterize male CH patients and represent reliable and reproducible diagnostic biomarkers able to identify CH patients. METHODS: Brain CT images were recorded between 2018 and 2020 in 24 male patients with CH and in 24 matched healthy controls (HC). Then, craniometric measurements were obtained, and logistic regression and receiver operating characteristic curves analyses were used to identify the craniometric abnormalities able to distinguish CH patients from HC. RESULTS: Logistic regression analyses showed that frontal bone height and facial width were able to discriminate, one independently from the other, CH patients from HC with an overall accuracy of 77%. The optimal cutoff score in detecting the probable presence of CH was 11.50 cm for frontal bone height and 13.30 cm for facial width. DISCUSSION: In the present study we found, for the first time by means of brain 3D computed tomography approach, abnormal craniometric measurements in CH patients when compared with HC. The absence of differences in smoke and alcohol intake suggests that the observed craniometric abnormalities may represent a specific feature of CH patients. CONCLUSION: The craniometric evaluation by means of brain 3D computed tomography could represent a widespread, noninvasive, and accurate tool to support CH diagnosis to avoid frequent misdiagnosis or delay in the diagnostic process.

Embryological considerations and evaluation of congenital anomalies of craniovertebral junction: A single-center experience.

OBJECTIVES: Craniovertebral junction (CVJ) abnormalities constitute a group of treatable neurological disorders, especially in the Indian subcontinent. Thus, it is essential that clinicians should be able to make a precise diagnosis of abnormalities and rule out important mimickers on multidetector computed tomography (MDCT) as this information ultimately helps determine the management, prognosis, and quality of life of patients. CVJ is the most complex part of the cervical region. Congenital malformations of this region can cause serious neurological deficit and require a surgical intervention. The present study was undertaken to know the embryological basis of the CVJ and to identify commonly observed congenital CVJ abnormalities, their frequency, and mode of presentation. MATERIALS AND METHODS: Diagnosed cases of CVJ anomalies on dynamic MDCT head were reviewed at a tertiary care center between January 2014 to December 2019. Type of anomaly, clinical presentation, and associated malformations were recorded. Different types of variations were expressed in terms of percentage. RESULTS: Congenital anomalies were seen in 42 cases. Fifteen types of anomalies were detected. Anomalies were either singly or in combination. The CVJ anomalies were more common in young adults (28%), almost equal in both sexes. The most common anomaly was basilar invagination (52.3%), followed by atlanto-occipital assimilation (33.3%), and Arnold-Chiari malformation is the most common soft tissue anomaly. In fourteen cases, additional anomalies of other vertebrae were present. The most common symptoms were weakness of extremities, neck pain, paresthesia, torticollis, and gait disturbances. About 28 patients got improved, 8 patients had residual deficit as that of preoperative status, and 4 patients got deteriorated after surgery, at 1-month follow-up. About 34 patients had improved, 5 remained static, and 3 patients got worsened at the end of 3-month follow-up. About 37 patients had improved, 4 patients remained static, and 2 patients got deteriorated at 6 months of follow-up. The patients with increased atlantodens interval 3-5 mm showed 77% improvement after surgery. CONCLUSION: Congenital CVJ anomalies, though rare, are fatal. CVJ abnormalities constitute an important group of treatable neurological disorders with diagnostic dilemma. The atlantodental interval is the most important preoperative prognostic marker. Dynamic CT imaging can provide additional useful information to the diagnosis of CVJ instability. To prevent long-term neurological problems, early diagnosis and treatment of congenital bony CVJ anomalies is important.

Use of craniometric data to facilitate migrant identifications at the United States/Mexico border.

OBJECTIVES: Thousands of migrants have died along the United States/Mexico border and many remain unidentified. The purpose of this research is to test whether estimations of population affinity, derived from craniometric data, can facilitate identification of migrant remains and provide a geographic region of origin rather than the broad label Hispanic. The appropriateness of current forensic reference data will also be assessed. METHODS: A case study combined with craniometric data from positively identified and unidentified migrants from the Pima County Office of the Medical Examiner (n = 489) in Arizona and operation identification (n = 201) in Texas were compared to skeletal data representing Guatemalan (n = 87) and Mexican (n = 65) Mayans. Biological distance and discriminant function analyses were used to assess overall population relationships and classificatory models for forensic anthropological application. RESULTS: The majority of evidence indicates that estimations of population affinity can assist in the facilitation identification of migrant remains, even when a broad classification is used. Biological distances among the groups suggest that positively identified Guatemalan and Mexican migrants are similar to one another but differ from Guatemalan and Mexican Mayans. CONCLUSIONS: Population affinity estimations can aid migrant identification, and current reference data used in forensic anthropological practice should be replaced with data from positive identifications. Estimates of geographic origin may be more useful than the broad generic term Hispanic for narrowing down the search for a missing person, but more data and research is needed to achieve this goal. Although, the utility of geographic origin estimates relies on transnational data centralization and sharing, which is not always the case.

A Universal Craniometric Index for Establishing the Diagnosis of Basilar Invagination.

OBJECTIVE: The conventional criteria for defining the basilar invagination (BI) focus on the relationship of odontoid tip to basion and opisthion, landmarks that are intrinsically variable especially in presence of occipitalised atlas. A universal single reference line is proposed that helps in unequivocally establishing the diagnosis of BI, may be relevant in establishing both Goel types A and B BI, as well as in differentiating a 'very high' from 'regular' BI. METHODS: Study design - case-control study. In 268 patients (group I with BI [n = 89] including Goel type A BI [n = 66], Goel type B BI [n = 23], and group II controls [n = 179]), the perpendicular distance between odontoid tip and line subtended between posterior tip of hard palate-internal occipital protuberance (P-IOP line) was measured. Logistic regression analysis determined factors influencing the proposed parameter (p < 0.05). RESULTS: In patients with a 'very high' BI (n = 5), the odontoid tip intersected/or was above the P-IOP line. In patients with a 'regular' BI (n = 84), the odontoid tip was 6.56 ± 3.9mm below the P-IOP line; while in controls, this distance was 12.53 ± 4.28 mm (p < 0.01). In Goel type A BI, the distance was 7.01 ± 3.78 mm and in type B BI, it was 5.07 ± 4.19 mm (p = 0.004). Receiver-operating characteristic curve analysis identified 9.0 mm (8.92-9.15 mm) as the cut-point for diagnosing BI using the odontoid tip-P-IOP line distance as reference. CONCLUSION: The odontoid tip either intersecting the P-IOP line (very high BI) or being < 9 mm below the P-IOP line (Goel types A and B BI) is recommended as highly applicable criteria to establish the diagnosis of BI. This parameter may be useful in establishing the diagnosis in all varieties of BI.

Combined Decompressive Hemicraniectomy and Port-Based Minimally Invasive Parafascicular Surgery for the Treatment of Subcortical Intracerebral Hemorrhage: Case Series, Technical Note, and Review of Literature.

BACKGROUND: Intracerebral hemorrhage (ICH) is a neurosurgical emergency. Combined decompressive hemicraniectomy (DHC) and minimally invasive parafascicular surgery (MIPS) may provide a practical method of managing subcortical ICH. OBJECTIVE: 1) To present a case series of combined DHC-MIPS for the treatment of subcortical-based ICH; 2) to describe technical nuances of DHC-MIPS; and 3) to provide a literature overview of MIPS for ICH. METHODS: The following inclusion criteria were used: 1) Glasgow Coma Scale (GCS) score <3-4; 2) admission within 6 hours of onset; 3) increased intracranial pressure caused by hemorrhage; 4) patient unresponsive to medical management; 5) hemorrhage >30 cm3; 6) subcortical location; and 7) midline shift (mm). Before DHC, sulcal cannulation used the following coordinates: intersection of tragus-frontal bone and midpoint of midpupillary line and midline; coronal suture: 3-4 cm posterior to this point). RESULTS: Three patients were selected: a 62-year old woman, a 45-year old woman, and a 36-year-old man. GCS and ICH scores on admission were 7 and 3, 3 and 4, and 3 and 4, respectively. ICH was located in left basal ganglia in patients 1 and 3 and right basal ganglia in patient 2, all with intraventricular extension. ICH volume was 81.7, 68.2, and 42.3 cm3, respectively. The postoperative GCS score was 11, 10, and 6, respectively. There were no intraoperative complications or mortalities. Evacuation was within 15 minutes in all patients. The modified Rankin Scale score was 3, 4, and 5, respectively, with semi-independence in case 1. CONCLUSIONS: Combined DHC-MIPS, with the use of craniometric points, can provide a unique and simple surgical option for the management of subcortical ICH.

Atlanto-occipital distraction injuries in survivors: craniometrics and associated ligamentous, spinal cord, and blunt cerebrovascular injury.

PURPOSE: Newer classification systems for upper cervical spine trauma now include ligamentous injury in addition to fracture and dislocation patterns. Assessment of associated ligamentous injury, spinal cord injury (SCI), and blunt cerebrovascular injuries (BCVI) in patients with atlanto-occipital distraction injuries (AODI) are critical for management. We aim to determine the incidence of ligamentous injury, SCI, and BCVI in patients with AODI and assess how craniometrics perform in diagnosis of AODI. MATERIALS AND METHODS: We performed an IRB-approved retrospective analysis of 35 cases of diagnosed AODI over a period of 8 years. Imaging was analyzed by two experienced neuroradiologists for craniometric measurements, ligamentous injury, SCI, and BCVI. Craniometric measurements were compared to 35 age-matched controls with normal atlanto-occipital joint. RESULTS: Out of 35 patients diagnosed with AODI, 27 were adults and 8 belonged to pediatric age group. The mean age of presentation was 29.4 years with a male/female ratio of 22:13. The basion-dental interval (70.4%) and the combined condylar sum (74.1%) were the most sensitive craniometric measurements for diagnosis of AODI. Alar ligament (83%) and the tectorial membrane (89%) injuries were most commonly injured ligaments. Three adult patients sustained SCI and 10 patients had BCVI. Majority of BCVI involved the internal carotid artery followed by the vertebral artery. CONCLUSIONS: The combination of craniometric indices with assessment of ligamentous injuries provides higher diagnostic accuracy for AODI. Alar ligament and tectorial membrane injuries have high association with AODI. There is high association of SCI and BCVI in AODI survivors.

Immersive Surgical Anatomy of the Craniometric Points.

Craniometric points (CPs) have been used in neurosciences since the 1800s. Localization of the CPs allows for the identification of crucial intracranial structures. Despite the contribution of advanced technology to surgery, the knowledge of these points remains crucial for surgical planning and intraoperative orientation. The understanding of these crucial points can be facilitated with the use of three-dimensional technology combined with anatomical dissections. The present study is part of a stereoscopic collection of volumetric models (VMs) obtained from cadaveric dissections that depict the relevant anatomy of the CPs. Five embalmed heads and two dry skulls have been used to depict these points. After the anatomical dissection, stereoscopic images and VMs were generated to show the correlation between external and internal landmarks. The CPs identified were divided into sutures, suture junctions, prominences and depressions, and cortical surface landmarks. The VMs represent an interactive way to define these points easily and their correlation with different intracranial structures (vascular structure, ventricle cavity, and Brodmann's areas).