RESUMO
Benznidazole is the main drug used in Chagas disease and its determination in plasma samples is useful in several situations. Hence, robust and accurate bioanalytical methods are needed. In this context, sample preparation deserves special attention, as it is the most error-prone, labor-intensive and time-consuming step. Microextraction by packed sorbent (MEPS) is a miniaturized technique, developed to minimize the use of hazardous solvents and sample amount. In this context, this study aimed to develop and validate a MEPS coupled to high performance liquid chromatography method for the analysis of benznidazole in human plasma. MEPS optimization was performed by a 24 full factorial experimental design, which resulted in about 25 % of recovery. The best condition was achieved when 500 µL of plasma,10 draw-eject cycles, sample volume drawn of 100 µL, and desorption with three times of 50 µL of acetonitrile were used. The chromatographic separation was performed with a C18 (150 × 4.5 mm, 5 µm) column. The mobile phase was composed of water:acetonitrile (60:40) at a flow rate of 1.0 mL min-1. The developed method was validated and proved to be selective, precise, accurate, robust and linear in the range from 0.5 to 6.0 µg mL-1. The method was applied to three healthy volunteers that made use of benznidazole tablets and showed to be adequate to assess this drug in plasma samples.
Assuntos
Microextração em Fase Sólida , Humanos , Cromatografia Líquida de Alta Pressão/métodos , Solventes/química , Microextração em Fase Sólida/métodosRESUMO
Biodiesel production from first-generation feedstock has shown a strong correlation with the increase in deforestation and the necessity of larger areas for land farming. Recent estimation from the European Federation for Transport and Environment evidenced that since the 2000s decade, an area equal to the Netherlands was deforested to supply global biodiesel demand, mainly originating from first-generation feedstock. Nevertheless, biodiesel is renewable, and it can be a greener source of energy than petroleum. A promising approach to make biodiesel independent from large areas of farming is to shift as much as possible the biodiesel production chain to second and third generations of feedstock. The second generation presents three main advantages, where it does not compete with the food industry, its commercial value is negligible, or none, and its usage as feedstock for biodiesel production reduces the overall waste disposal. In this manuscript, we present an oligomeric catalyst designed to be multi-functional for second-generation feedstock transesterification reactions, mainly focusing our efforts to optimize the conversion of tallow fat and sauteing oil to FAME and FAEE, applying our innovative catalyst. Named as Oligocat, our catalyst acts as a Brønsted-Lowry acid catalyst, providing protons to the reaction medium, and at the same time, with the course of the reaction, it sequesters glycerol molecules from the medium and changes its physical phase during the transesterification reaction. With this set of properties, Oligocat presents a pseudo-homogenous behavior, reducing the purification and separation steps of the biodiesel process production. Reaction conditions were optimized applying a 42 factorial planning. The output parameter evaluated was the conversion rate of triacylglycerol to mono alkyl esters, measured through gel permeation chromatography (GPC). After the optimization studies, a conversion yield of 96.7 (±1.9) wt% was achieved, which allows classifying the obtained mono alkyl esters as biodiesel by ASTM D6751 or EN 14214:2003. After applying the catalyst in three reaction cycles, Oligocat still presented a conversion rate above 96.5 wt% and as well an excellent recovery rate.
RESUMO
Nitrilases and nitrile hydratases/amidases hydrolyze nitriles into carboxylic acids and/or amides, which are used in industrial chemical processes. In the present study, 26 microorganisms, including yeasts and filamentous fungi, in a minimum solid mineral medium supplemented with glucose and phenylacetonitrile were screened to evaluate their biocatalytic potential. Of these microorganisms, five fungi of the genus Aspergillus were selected and subjected to colorimetry studies to evaluate the production and distinction of nitrilase and nitrile hydratase/amidase enzymes. Aspergillus parasiticus Speare 7967 and A. niger Tiegh. 8285 produced nitrilases and nitrile hydratase, respectively. Nitrilase optimization was performed using a Box-Behnken design (BBD) and fungus A. parasiticus Speare 7967 with phenylacetonitrile volume (µl), pH, and carbohydrate source (starch:glucose; g/g) as independent variables and nitrilase activity (U ml-1 ) as dependent variable. Maximum activity (2.97 × 10-3 U ml-1 ) was obtained at pH 5.5, 80 µl of phenylacetonitrile, and 15 g of glucose. A. parasiticus Speare 7967 showed promise in the biotransformation of nitriles to carboxylic acids.
Assuntos
Aminoidrolases , Ensaios de Triagem em Larga Escala , Fungos , Nitrilas/metabolismo , Ácidos Carboxílicos/metabolismo , Aspergillus/metabolismo , GlucoseRESUMO
Enzyme immobilization is a widespread empiric technology to achieve more stable, active and reusable enzymes. The empiricism can be reduced by the application of rational design procedures employing bioinformatic tools, engineered-proteins and detailed analyses of existent data. In this chapter, we describe relevant approaches to rationalize the design of enzyme immobilization protocols, with special attention to the modulation of immobilization pH to regulate the operational stability of glutaraldehyde cross-linked enzymes and the coating of iron-containing supports to preserve the integrity of iron-sensitive enzymes. Other strategies, such as the use of factorial planning, optimization of specific enzyme orientation through protein engineering and the use of mathematical algorithms and in silico prediction tools are also described to reduce the classical empiricism. Finally, a public repository creation is proposed as a new promising tool to develop an improvement on future rational design procedures of enzyme immobilization.
Assuntos
Enzimas Imobilizadas/química , Animais , Bactérias/química , Bactérias/enzimologia , Biocatálise , Biotecnologia , Reagentes de Ligações Cruzadas/química , Estabilidade Enzimática , Fungos/química , Fungos/enzimologia , Glutaral/química , HumanosRESUMO
Complete factorial planning 23 was applied to identify the influence of the cassava starch(A), glycerol(B) and modified clay(C) content on the water vapor permeability(WVP) of the cassava starch films with the addition of bentonite clay as a filler, its surface was modified by ion exchange from cetyltrimethyl ammonium bromide. The films were characterized by X-ray diffraction(XRD), fourier transform by infrared radiation(FTIR), atomic force microscopy(AFM) and scanning electron microscopy(SEM). The factorial analysis suggested a mathematical model thats predicting the optimal condition of the minimization of WVP. The influence of each individual factor and interaction in the WVP was investigated by Pareto graph, response surface and the optimization was established by the desirability function. The sequence of the degree of statistical significance of the investigated effects on the WVP observed in the Pareto graph was C>B>A>BC>AC. Interactions AB, BC and AC showed that the modified clay was the factor of greater significance.
Assuntos
Bentonita/química , Argila/química , Conservação de Alimentos/métodos , Conservantes de Alimentos/química , Manihot/química , Raízes de Plantas/química , Amido/química , Água/química , Glicerol/química , Microscopia de Força Atômica , Microscopia Eletrônica de Varredura , Modelos Estatísticos , Permeabilidade , Plastificantes/química , Espectroscopia de Infravermelho com Transformada de Fourier , Amido/isolamento & purificação , Difração de Raios XRESUMO
ABSTRACT Lippia origanoides is a honey shrub which has showed hypotensive potential assessed by in vivo studies. The aim of this work is the development of a pharmaceutical formulation composed by an optimized extract obtained from aerial parts of L. origanoides. The quantification of the naringenin marker in the dry extract and tablets developed was performed, as well as the assessment of the oral acute toxicity in rats. The hydroalcoholic extract of L. origanoides was spray-dried with the addition of colloidal silicon dioxide (Lo-HAE/CSD), and then applied in the preparation of eight different lots of tablets. The influence of the diluent (cellulose or babassu mesocarp), the presence of binder, and the percentage of lubricant, as well as organoleptic and physicochemical characteristics were screened. For the quantification of the marker content both in Lo-HAE/CSD and in the tablets, an analytical curve of the naringenin standard was fitted, and the samples were then analyzed in UFLC. The toxicological assessment was performed in female Wistar rats according to the Acute Toxic Class Method from OECD. The developed tablets produced meet acceptable macroscopic characteristics, and the presence of babassu as diluent provided improved physicochemical properties. The best content of Lo-HAE/CSD in the tablet (100.27%) was identified for the lot containing babassu, composed by 1.0% magnesium stearate, without PVP binder in its formulation. Moreover, Lo-HAE/CSD showed no signs of toxicity. Therefore, the babassu mesocarp powder is a promising pharmaceutical excipient for the development of herbal tablets containing the Lippia origanoides extract.
Assuntos
Animais , Feminino , Ratos , Comprimidos/farmacologia , Lippia , Composição de Medicamentos/estatística & dados numéricos , Extratos Vegetais , Verbenaceae/classificaçãoRESUMO
Biosynthesis of active secondary metabolites by fungi occurs as a specific response to the different growing environments. Changes in this environment alter the chemical and biological profiles leading to metabolites diversification and consequently to novel pharmacological applications. In this work, it was studied the influence of three parameters (fermentation length, medium composition and aeration) in the biosyntheses of antimicrobial metabolites by the fungus Aspergillus parasiticus in 10 distinct fermentation periods. Metabolism modulation in two culturing media, CYA and YES was evaluated by a 2(2) full factorial planning (ANOVA) and on a 2(3) factorial planning, role of aeration, medium composition and carbohydrate concentration were also evaluated. In overall, 120 different extracts were prepared, their HPLC profiles were obtained and the antimicrobial activity against A. flavus, C. albicans, E. coli and S. aureus of all extracts was evaluated by microdilution bioassay. Yield of kojic acid, a fine chemical produced by the fungus A. parasiticus was determined in all extracts. Statistical analyses pointed thirteen conditions able to modulate the production of bioactive metabolites by A. parasiticus. Effect of carbon source in metabolites diversification was significant as shown by the changes in the HPLC profiles of the extracts. Most of the extracts presented inhibition rates higher than that of kojic acid as for the extract obtained after 6 days of fermentation in YES medium under stirring. Kojic acid was not the only metabolite responsible for the activity since some highly active extracts showed to possess low amounts of this compound, as determined by HPLC.
Assuntos
Anti-Infecciosos/metabolismo , Aspergillus/metabolismo , Aspergillus/efeitos dos fármacos , Aspergillus/crescimento & desenvolvimento , Candida albicans/efeitos dos fármacos , Meios de Cultura/química , Escherichia coli/efeitos dos fármacos , Fermentação , Testes de Sensibilidade Microbiana , Staphylococcus aureus/efeitos dos fármacosRESUMO
O cloridrato de clonidina é um α2-adrenérgico que reduz a pressão sanguínea e retarda a estimulação cardíaca simpaticomimética. Esse fármaco é uma substância de baixo índice terapêutico que possui alta potência, sendo utilizado em baixas concentrações. Pode ser preparado em farmácias magistrais, seguindo-se rigorosos critérios de Boas Práticas de Manipulação estipulados pela Anvisa. Esse controle surgiu em razão de diversos acidentes possivelmente associados ao uso de cloridrato de clonidina manipulado. Diante disso, o objetivo deste trabalho foi avaliar o processo de mistura de pós na manipulação magistral da clonidina, buscando segurança e reprodutibilidade no referido processo. Para tanto, foram produzidas 60 cápsulas de cada lote, seguindo o planejamento fatorial 2³, em que foram estabelecidas as seguintes variáveis de entrada: processo de mistura (diluição geométrica e misturador Mixer Plus®), tamanho do invólucro gelatinoso (n°03 e 02) e concentração do fármaco (0,1 e 0,2 mg). A variável resposta para o planejamento foi o teor do fármaco nas cápsulas. Além disso, foram verificados outros parâmetros de qualidade, como o peso médio e uniformidade de conteúdo. As cápsulas obtidas encontraram-se dentro dos limites especificados pelos compêndios oficiais. Por isso, os resultados sinalizam que apesar do processo de obtenção das cápsulas ser crítico é possível obter produtos com qualidade e segurança comprovada...
Clonidine hydrochloride is an α2-adrenergic agonist that reduces the blood pressure and delays cardiac sympathomimetic stimulation. This drug has a low therapeutic index, high potency and is commonly used at low concentrations. It can be prepared at compounding pharmacies, as long as the rigorous criteria of Good Handling Practices stipulated by Anvisa are followed. This control had its origins in several accidents possibly associated with the use of compounded clonidine hydrochloride. In this context, the present study was designed to assess the powder-mixing process during the compounding of clonidine, so as to optimize its safety and repeatability. To this end, 60 capsules were produced in each batch, following 23 factorial planning, using the following input variables: mixing process (geometric dilution or Mixer Plus®), size of gelatin shell(number 03 or 02) and drug concentration (0.1 and 0.2mg). The response variable for the planning was the amount of drug inside the capsules. In addition, other quality parameters were determined, such as the average weight and content uniformity. The capsules produced were within the limits specified by official compendia. Therefore, the results indicate that, although the process of compounding capsules is critical, it is possible to have products with assured quality and safety...
Assuntos
Anti-Hipertensivos , ClonidinaRESUMO
Biosynthesis of active secondary metabolites by fungi occurs as a specific response to the different growing environments. Changes in this environment alter the chemical and biological profiles leading to metabolites diversification and consequently to novel pharmacological applications. In this work, it was studied the influence of three parameters (fermentation length, medium composition and aeration) in the biosyntheses of antimicrobial metabolites by the fungus Aspergillus parasiticus in 10 distinct fermentation periods. Metabolism modulation in two culturing media, CYA and YES was evaluated by a 2² full factorial planning (ANOVA) and on a 2³ factorial planning, role of aeration, medium composition and carbohydrate concentration were also evaluated. In overall, 120 different extracts were prepared, their HPLC profiles were obtained and the antimicrobial activity against A. flavus, C. albicans, E. coli and S. aureus of all extracts was evaluated by microdilution bioassay. Yield of kojic acid, a fine chemical produced by the fungus A. parasiticus was determined in all extracts. Statistical analyses pointed thirteen conditions able to modulate the production of bioactive metabolites by A. parasiticus. Effect of carbon source in metabolites diversification was significant as shown by the changes in the HPLC profiles of the extracts. Most of the extracts presented inhibition rates higher than that of kojic acid as for the extract obtained after 6 days of fermentation in YES medium under stirring. Kojic acid was not the only metabolite responsible for the activity since some highly active extracts showed to possess low amounts of this compound, as determined by HPLC.