Fumonisins in infant cereals marketed as complementary food in Argentina.

Infant cereals are typically the first foods introduced as complementary foods. Cereals used to elaborate complementary foods, such as wheat, maize and rice, are susceptible to mycotoxin contamination. Among mycotoxins, fumonisins have been epidemiologically associated, in humans, with oesophageal cancer, neural tube defects and stunting. Fumonisins have been found in maize and wheat grains in Argentina. In the present study, a survey was conducted to determine their occurrence in 82 wheat-based and multicereal-based infant cereal items collected from retail stores in Rio Cuarto, Argentina, using HPLC-MS. Of these samples, 84% showed FBs contamination with levels ranging from 0.05 to 992 µg/kg). Although FB1 was the most prevalent fumonisin, FB2 was found at higher levels. Most samples had levels below the limit of 200 µg/kg set for Argentinean cereal products for children. The outcome of this survey provides information on the naturally presence of fumonisin in infant cereal intended for children in Argentina, which can be helpful to consider relevant monitoring programmes.

Limited Effectiveness of Penicillium camemberti in Preventing the Invasion of Contaminating Molds in Camembert Cheese.

Mold-ripened cheese acquires a distinctive aroma and texture from mold cultures that mature on a fresh cheese wheel. Owing to its high moisture content (aw = 0.95) and pliability, soft cheese is prone to contamination. Many contaminating mold species are unable to grow at colder temperatures, and the lactic acid produced by the cheese bacteria inhibits further infiltration. Thus, Camembert cheese is generally well protected against contamination by a wide range of species. In this study, cocultures of Penicillium camemberti and widely distributed mycotoxin-producing mold species were incubated on different types of agars, and purchased Camembert samples were deliberately contaminated with mycotoxin-producing mold species capable of growing at both 25 °C and 4 °C. The production of mycotoxins was then monitored by the extraction of the metabolites and their subsequent measurement by means of a liquid chromatography-tandem mass spectrometry (LC-MS/MS) based targeted metabolite profiling approach. The production of cyclopiazonic acid (CPA) was highly dependent on the species cocultivated with Penicillium camemberti, the temperature and the substrate. Contamination of Camembert cheese with Penicillium chrysogenum, Mucor hiemalis, or Penicillium glabrum induced CPA production at 25 °C. Although mold growth on cheese was not always evident on biofilms for certain cultures, except for Penicillium citrinum, which stained the monosaccharide agar yellow, mycotoxins were detected in many agar and cheese samples, as in all monosaccharide agar samples. In conclusion, cheese should be immediately discarded upon the first appearance of mold.

Interactive effects of trust in government information and perceived value on Chinese consumers' actual purchasing behavior toward contaminated seafood.

Previous studies have separately examined the roles of trust in government information and perceived value in consumer food choices; however, the interactive effects of trust in government information and perceived value remain unknown. Therefore, this study explores the joint effects of trust in government information and perceived value on shaping consumers' actual food purchase behavior after food contamination. A logit model was used to estimate the interactive effects. The results from a sample of 710 Chinese consumers indicated that a lack of trust continues to make consumers concerned about the safety of seafood, which, together with the spread of internet rumors, leads to the fact that trust in government information does not directly affect consumers' actual purchase behavior. However, it can also indirectly influence purchase behavior through perceived risks and benefits. Specifically, trust in government information reduces risk perception among low-income consumers and enhances benefit perception among low-risk city consumers, thus enhancing purchasing behavior. Moreover, we find city heterogeneity in its impact on consumer purchasing behavior. Specifically, in low-risk cities, it significantly promotes consumer purchasing behavior, however, in high-risk cities, it does not directly affect consumer purchasing behavior. Overall, trust in government information does not directly affect consumer purchasing behavior. Perceived value is a key factor affecting consumer purchasing behavior. An interactive effect exists between trust in government information and perceived value on consumer purchasing behaviors. These results highlight the role of perceived value in amplifying the effects of trust in government information. These findings have significant implications for seafood producers and policymakers. Effective strategies should encompass both the provision of perceived value and the cultivation of trust in government information to promote consumer choices of contaminated food.

Microplastics contamination in the most popular brands of Iranian sausages and evaluation of its human exposure.

Microplastics (MPs) pollution represents a nascent environmental contaminant that has recently infiltrated human life and the food chain. The primary objective of this study was to investigate the presence of MPs in different brands of Iranian sausages. Qualitative and quantitative analyses of MPs particles were conducted using stereo- and fluorescent microscopy, FT-IR (Fourier-transform infrared spectroscopy), and SEM-EDS (Scanning electron microscopy-energy dispersive X-ray spectroscopy) techniques. Samples were collected from the most commonly consumed sausage brands in Iranian markets. The findings showed that the various sausage brands contained an average abundance of 25.7 ± 21.68 (range 10-70) and 55.45 ± 45.5 (range 10-175) particles/kg based on optical and fluorescent microscopy analyses, respectively. Predominantly, MPs were identified in fiber form (77-89 %), with a smaller proportion present in fragmented form (11-23 %). Polymer analysis using FT-IR identified polyethylene (PE) and polystyrene (PS) as the primary constituents. Furthermore, the estimated annual intake (EAI) of MPs was calculated at 804 and 3517 particles/kg bw/year for adults and children, respectively, based on optical microscopy observations. In comparison, fluorescent microscopy indicated an intake of 1734 and 7589 particles/kg bw/year for the respective age groups. These results emphasize the potential of MPs contamination to penetrate into different food products including sausages through processing routes, which can threaten human health.

Antimicrobial Activity of Leaf Aqueous Extract of Schinus polygamus (Cav.) Cabrera against Pathogenic Bacteria and Spoilage Yeasts.

The antimicrobial activity of an aqueous extract of the leaves of Schinus polygamus (cav.) Cabrera against microorganisms of food importance was evaluated. First, the leaf aqueous extract of Schinus polygamus was characterized, quantifying hydroxycinnamic acids and phenolic compounds. Then, a battery of strains was tested, including Escherichia coli ATCC 25922, Salmonella Typhimurium ATCC 14028, and Listeria monocytogenes ATCC 13932. Also, we tested wine spoilage yeasts such as Brettanomyces bruxellensis LAMAP2480, B. bruxellensis LAMAP1359, B. bruxellensis CECT1451, and Pichia guilliermondii NPCC1051. Tests were conducted using the kinetic curve of growth and cell viability counts. The results indicate that with 10% v/v of concentrated extract, it is possible to observe growth inhibition of all microorganisms studied, with statistically significant differences during the whole measurement time (70 h for bacteria and 145 h for yeast).

Low-level, chronic ingestion of lead and cadmium: The unspoken danger for at-risk populations.

The long-term effects of low-level, chronic exposure to lead and cadmium through ingestion are often overlooked, despite the urgency surrounding the clinical onset and worsening of certain pathologies caused by these metals. This work reviews current legislation, global ingestion levels, and blood levels in the general population to emphasize the need for reactivity towards this exposure, especially in at-risk populations, including patients with early-stage renal and chronic kidney disease. Global data indicates persistent chronic ingestion of lead and cadmium, with no decreasing trend in recent years, and a daily consumption of tens of micrograms worldwide. Moreover, the average blood lead and cadmium levels in the general population are concerning in many countries with some significantly exceeding healthy limits, particularly for children. Technologies developed to cleanse soil and prevent heavy metal contamination in food are not yet applicable on a global scale and remain financially inaccessible for many communities. Addressing this chronic ingestion at the human level may prove more beneficial in delaying the onset of associated clinical pathologies or preventing them all together.

Pathogen producing aflatoxin in contaminated sandwich: Identification and preservation.

The toxicity of the contaminated powder contributed to toxic aflatoxins has been well-known in the literature. However, before this study, the specific fungal strain behind aflatoxin production remained unidentified. Our research aimed to isolate and identify fungi from the tainted sandwiches while also assessing the preservation of sandwiches in ambient conditions. The study pinpointed Aspergillus flavus as the fungus responsible for aflatoxin production. Analysis revealed that the sandwich samples contaminated with pure A. flavus exhibited a significant Aflatoxin B1 (AFB1) concentration of 55.2 ± 0.21 ng/g, accompanied by a spore count of 2 × 106 Colony-Forming Unit (CFU)/g after ten days. In contrast, sandwich samples contaminated with the unspecified fungi displayed a lower AFB1 content of 16.21 ± 0.42 ng/g, with a spore count of 2.2 × 102 CFU/g after the same duration. In the prevention study, the efficacy of the ethanol spray method for inhibiting aflatoxin from A. flavus was investigated. Results demonstrated that a 70 % ethanol concentration at a ratio of 2.0 % total weight of the sandwich proved highly effective, significantly impeding fungal growth. This method extended the preservation time by sevenfold compared to the control. Importantly, tests at 2.0 % ethanol of the sandwich weight did not detect aflatoxin presence.

Construction of metal interpretable scoring system and identification of tungsten as a novel risk factor in COPD.

Numerous studies have highlighted the correlation between metal intake and deteriorated pulmonary function, emphasizing its pivotal role in the progression of Chronic Obstructive Pulmonary Disease (COPD). However, the efficacy of traditional models is often compromised due to overfitting and high bias in datasets with low-level exposure, rendering them ineffective in delineating the contemporary risk trends associated with pulmonary diseases. To address these limitations, we embarked on developing advanced, interpretable models, crucial for elucidating the intricate mechanisms of metal toxicity and enriching the domain knowledge embedded in toxicity models. In this endeavor, we scrutinized extensive, long-term metal exposure datasets from NHANES to explore the interplay between metal and pulmonary functionality. Employing a variety of machine-learning approaches, we opted for the "Mixer of Experts" model for its proficiency in identifying a myriad of toxicological trends and sensitivities. We conceptualized and illustrated the TSAP (Toxicity Score at Population-level), a metal interpretable scoring system offering performance nearly equivalent to the amalgamation of standard interpretable methods addressing the "black box" conundrum. This streamlined, bifurcated procedural analysis proved instrumental in discerning established risk factors, thereby uncovering Tungsten as a novel contributor to COPD risk. SYNOPSIS: TSAP achieved satisfied performance with transparent interpretability, suggesting tungsten intake need further action for COPD prevention.

Identificación de microorganismos entéricos en áreas de preparación y consumo de alimentos / Identification of enteric microorganisms in food preparation and consumption areas / Identificação de microrganismos entéricos em áreas de preparação e consumo de alimentos

La contaminación de las áreas de preparación al entrar en contacto con los alimentos crudos o cocinados, es por esto que una de las principales causas de la contaminación de las superficies inertes es la inadecuada manipulación de los alimentos a la hora de ser preparados. Con el objetivo de controlar la aplicación de normas de higiene en las áreas de preparación y consumo de alimentos mediante análisis microbiológicos para disminuir los riesgos de contaminación alimentaria. Esta investigación es de carácter descriptivo, en la cual se realizó una inspección visual del establecimiento con el propósito de evaluar las condiciones higiénicas sanitarias, mediante la aplicación de la Guía Técnica para el Análisis Microbiológico de Superficies en contacto con Alimentos y Bebidas. Para el análisis microbiológico de las muestras se emplearon las técnicas de inoculación, método de estriado, aislamiento bacteriano, tinción diferencial y utilización de las pruebas bioquímicas como: TSI, SIM, Citrato de Simmons, Urea, Lisina, Catalasa y Oxidasa, además de la utilización de medios de cultivo selectivo y diferencial como agar EMB y agar MacConkey para la identificación de bacterias entéricas como: E. coli, Salmonella, Klebsiella pneumoniae, Shigella, Pseudomona aeruginosa. Los resultados arrojaron que la frecuencia bacteriana de las superficies inertes de los restaurantes en el área de preparación de alimentos (mesón y tabla de picar) tienen presencia de bacterias: Salmonella con mayor frecuencia; E. coli, Klebsiella pneumoniae y Pseudomonas aeruginosa de mediana frecuencia y de baja para Shigella, y en el área de consumo de alimentos (mesas) la bacteria de mayor frecuencia es la E. coli y Shigella, la Klebsiella pneumoniae de mediana y Pseudomona aeruginosa se encuentra en baja frecuencia. Se llegó a la conclusión que las superficies inertes tanto en el área de preparación como en el área de consumo de alimentos se encuentran contaminados por lo que hay un riesgo de infección alimentaria para los comensales de la Universidad Técnica de Machala.

Contamination of preparation areas when coming into contact with raw or cooked foods, which is why one of the main causes of contamination of inert surfaces is inadequate handling of food when it is being prepared. With the aim of controlling the application of hygiene standards in the areas of food preparation and consumption through microbiological analysis to reduce the risks of food contamination. This research is descriptive in nature, in which a visual inspection of the establishment was carried out with the purpose of evaluating the sanitary and hygienic conditions, through the application of the Technical Guide for the Microbiological Analysis of Surfaces in Contact with Food and Beverages. For the microbiological analysis of the samples, inoculation techniques, streaking method, bacterial isolation, differential staining and use of biochemical tests such as: TSI, SIM, Simmons Citrate, Urea, Lysine, Catalase and Oxidase, in addition to use of selective and differential culture media such as EMB agar and MacConkey agar for the identification of enteric bacteria such as: E. coli, Salmonella, Klebsiella pneumoniae, Shigella, Pseudomona aeruginosa. The results showed that the bacterial frequency of the inert surfaces of the restaurants in the food preparation area (counter and cutting board) have the presence of bacteria: Salmonella more frequently; E. coli, Klebsiella pneumoniae and Pseudomonas aeruginosa of medium frequency and low frequency for Shigella, and in the food consumption area (tables) the most frequent bacteria are E. coli and Shigella, Klebsiella pneumoniae of medium and Pseudomona aeruginosa It is at low frequency. It was concluded that the inert surfaces in both the preparation area and the food consumption area are contaminated, so there is a risk of food infection for diners at the Technical University of Machala

Contaminação das áreas de preparo ao entrar em contato com alimentos crus ou cozidos, por isso uma das principais causas de contaminação de superfícies inertes é o manuseio inadequado dos alimentos no momento do preparo. Com o objetivo de controlar a aplicação de padrões de higiene nas áreas de preparação e consumo de alimentos através de análises microbiológicas para reduzir os riscos de contaminação alimentar. Esta pesquisa é de natureza descritiva, na qual foi realizada uma inspeção visual do estabelecimento com a finalidade de avaliar as condições sanitárias e higiênicas, por meio da aplicação do Guia Técnico para Análise Microbiológica de Superfícies em Contato com Alimentos e Bebidas. Para a análise microbiológica das amostras foram utilizadas técnicas de inoculação, método de estrias, isolamento bacteriano, coloração diferencial e utilização de testes bioquímicos como: TSI, SIM, Citrato de Simmons, Ureia, Lisina, Catalase e Oxidase, além de utilização de testes seletivos e diferenciais. meios de cultura como ágar EMB e ágar MacConkey para identificação de bactérias entéricas como: E. coli, Salmonella, Klebsiella pneumoniae, Shigella, Pseudomona aeruginosa. Os resultados mostraram que a frequência bacteriana das superfícies inertes dos restaurantes na área de preparo de alimentos (balcão e tábua de corte) apresentam com maior frequência a presença de bactérias: Salmonella; E. coli, Klebsiella pneumoniae e Pseudomonas aeruginosa de média frequência e baixa frequência para Shigella, e na área de consumo alimentar (tabelas) as bactérias mais frequentes são E. coli e Shigella, Klebsiella pneumoniae de média e Pseudomona aeruginosa Está em baixa frequência. Concluiu-se que as superfícies inertes tanto na área de preparação como na área de consumo de alimentos estão contaminadas, pelo que existe risco de infecção alimentar para os comensais da Universidade Técnica de Machala

Identificación de microorganismos entéricos en áreas de preparación y consumo de alimentos

La contaminación de las áreas de preparación al entrar en contacto con los alimentos crudos o cocinados, es por esto que una de las principales causas de la contaminación de las superficies inertes es la inadecuada manipulación de los alimentos a la hora de ser preparados. Con el objetivo de controlar la aplicación de normas de higiene en las áreas de preparación y consumo de alimentos mediante análisis microbiológicos para disminuir los riesgos de contaminación alimentaria. Esta investigación es de carácter descriptivo, en la cual se realizó una inspección visual del establecimiento con el propósito de evaluar las condiciones higiénicas sanitarias, mediante la aplicación de la Guía Técnica para el Análisis Microbiológico de Superficies en contacto con Alimentos y Bebidas. Para el análisis microbiológico de las muestras se emplearon las técnicas de inoculación, método de estriado, aislamiento bacteriano, tinción diferencial y utilización de las pruebas bioquímicas como: TSI, SIM, Citrato de Simmons, Urea, Lisina, Catalasa y Oxidasa, además de la utilización de medios de cultivo selectivo y diferencial como agar EMB y agar MacConkey para la identificación de bacterias entéricas como: E. coli, Salmonella, Klebsiella pneumoniae, Shigella, Pseudomona aeruginosa. Los resultados arrojaron que la frecuencia bacteriana de las superficies inertes de los restaurantes en el área de preparación de alimentos (mesón y tabla de picar) tienen presencia de bacterias: Salmonella con mayor frecuencia; E. coli, Klebsiella pneumoniae y Pseudomonas aeruginosa de mediana frecuencia y de baja para Shigella, y en el área de consumo de alimentos (mesas) la bacteria de mayor frecuencia es la E. coli y Shigella, la Klebsiella pneumoniae de mediana y Pseudomona aeruginosa se encuentra en baja frecuencia. Se llegó a la conclusión que las superficies inertes tanto en el área de preparación como en el área de consumo de alimentos se encuentran contaminados por lo que hay un riesgo de infección alimentaria para los comensales de la Universidad Técnica de Machala.

Contamination of preparation areas when coming into contact with raw or cooked foods, which is why one of the main causes of contamination of inert surfaces is inadequate handling of food when it is being prepared. With the aim of controlling the application of hygiene standards in the areas of food preparation and consumption through microbiological analysis to reduce the risks of food contamination. This research is descriptive in nature, in which a visual inspection of the establishment was carried out with the purpose of evaluating the sanitary and hygienic conditions, through the application of the Technical Guide for the Microbiological Analysis of Surfaces in Contact with Food and Beverages. For the microbiological analysis of the samples, inoculation techniques, streaking method, bacterial isolation, differential staining and use of biochemical tests such as: TSI, SIM, Simmons Citrate, Urea, Lysine, Catalase and Oxidase, in addition to use of selective and differential culture media such as EMB agar and MacConkey agar for the identification of enteric bacteria such as: E. coli, Salmonella, Klebsiella pneumoniae, Shigella, Pseudomona aeruginosa. The results showed that the bacterial frequency of the inert surfaces of the restaurants in the food preparation area (counter and cutting board) have the presence of bacteria: Salmonella more frequently; E. coli, Klebsiella pneumoniae and Pseudomonas aeruginosa of medium frequency and low frequency for Shigella, and in the food consumption area (tables) the most frequent bacteria are E. coli and Shigella, Klebsiella pneumoniae of medium and Pseudomona aeruginosa It is at low frequency. It was concluded that the inert surfaces in both the preparation area and the food consumption area are contaminated, so there is a risk of food infection for diners at the Technical University of Machala.

Contaminação das áreas de preparo ao entrar em contato com alimentos crus ou cozidos, por isso uma das principais causas de contaminação de superfícies inertes é o manuseio inadequado dos alimentos no momento do preparo. Com o objetivo de controlar a aplicação de padrões de higiene nas áreas de preparação e consumo de alimentos através de análises microbiológicas para reduzir os riscos de contaminação alimentar. Esta pesquisa é de natureza descritiva, na qual foi realizada uma inspeção visual do estabelecimento com a finalidade de avaliar as condições sanitárias e higiênicas, por meio da aplicação do Guia Técnico para Análise Microbiológica de Superfícies em Contato com Alimentos e Bebidas. Para a análise microbiológica das amostras foram utilizadas técnicas de inoculação, método de estrias, isolamento bacteriano, coloração diferencial e utilização de testes bioquímicos como: TSI, SIM, Citrato de Simmons, Ureia, Lisina, Catalase e Oxidase, além de utilização de testes seletivos e diferenciais. meios de cultura como ágar EMB e ágar MacConkey para identificação de bactérias entéricas como: E. coli, Salmonella, Klebsiella pneumoniae, Shigella, Pseudomona aeruginosa. Os resultados mostraram que a frequência bacteriana das superfícies inertes dos restaurantes na área de preparo de alimentos (balcão e tábua de corte) apresentam com maior frequência a presença de bactérias: Salmonella; E. coli, Klebsiella pneumoniae e Pseudomonas aeruginosa de média frequência e baixa frequência para Shigella, e na área de consumo alimentar (tabelas) as bactérias mais frequentes são E. coli e Shigella, Klebsiella pneumoniae de média e Pseudomona aeruginosa Está em baixa frequência . Concluiu-se que as superfícies inertes tanto na área de preparação como na área de consumo de alimentos estão contaminadas, pelo que existe risco de infecção alimentar para os comensais da Universidade Técnica de Machala.

Mapping Microplastics in Humans: Analysis of Polymer Types, and Shapes in Food and Drinking Water-A Systematic Review.

Microplastics (MPs) pervade the environment, infiltrating food sources and human bodies, raising concerns about their impact on human health. This review is focused on three key questions: (i) What type of polymers are humans most exposed to? (ii) What are the prevalent shapes of MPs found in food and human samples? (iii) Are the data influenced by the detection limit on the size of particles? Through a systematic literature analysis, we have explored data on polymer types and shapes found in food and human samples. The data provide evidence that polyester is the most commonly detected polymer in humans, followed by polyamide, polyurethane, polypropylene, and polyacrylate. Fibres emerge as the predominant shape across all categories, suggesting potential environmental contamination from the textile industry. Studies in humans and drinking water reported data on small particles, in contrast to larger size MPs detected in environmental research, in particular seafood. Discrepancies in size detection methodologies across different reports were identified, which could impact some of the discussed trends. This study highlights the need for more comprehensive research on the interactions between MPs and biological systems and the effects of MPs on toxicity, together with standardised analytical methodologies to accurately assess contamination levels and human exposure. Understanding these dynamics is essential for formulating effective strategies to mitigate the environmental and health implications of MP pollution.

Arithmetic vs. Weighted Means in Fish Fillets Mercury Analyses.

Mercury (Hg) analyses in species of fish are performed for two reasons: (1) to safeguard human health; and (2) to assess environmental quality, since different environmental changes may increase the Hg concentrations in fish. These analyses are important since both natural and human activities can increase these Hg concentrations, which can vary extensively, depending on the species, age and catching location. Hg-contaminated fish or other marine foodstuffs can be only detected by chemical analysis. If the aim of Hg analysis is to protect the health of marine food consumers, researcher workers must consider the location where the fish were caught and interpret the results accordingly. Health and environmental officials must appreciate that in specific places, local people may have a daily diet consisting entirely of fish or other marine foods, and these individuals should not be exposed to high concentrations of Hg. Regional and national health and environmental officials should follow the recent guidance of international organizations when drawing their final conclusions about whether the products are safe or unsafe to eat. Correct statistical calculations are not always carried out; so, too high Hg amounts could be presented, and fish eaters could be protected. This work has been conducted to show the differences in Hg concentrations between weighted (weighted with fish weights) and arithmetic means. Thus, the mean that is only weighted also includes the Hg content in fishes; so, the exposure to Hg can be evaluated.

Bisphenol A and its analogues: from their occurrence in foodstuffs marketed in Europe to improved monitoring strategies-a review of published literature from 2018 to 2023.

In this review article, the research works covering the analytical determination of bisphenol A (BPA) and its structural analogues published from 2018 to present (February 2024) were examined. The review offers an overview of the concentration levels of these xenoestrogens in food and beverages, and discusses concerns that these may possibly pose to the human health and scrutinises, from an analytical perspective, the main biomonitoring approaches that are applied. This comes as a natural evolution of a previous review that covered the same topic but in earlier years (up to 2017). As compared to the past, while the volume of published literature on this topic has not necessarily decreased, the research studies are now much more homogeneous in terms of their geographical origin, i.e., Southern Europe (mainly Italy and Spain). For this reason, an estimated daily intake of the European population could not be calculated at this time. In terms of the analytical approaches that were applied, 67% of the research groups exploited liquid chromatography (LC), with a detection that was prevalently (71%) afforded by mass spectrometry, with over one-fourth of the research teams using fluorescence (26%) and a minority (3%) detecting the analytes with diode array detection. One-third of the groups used gas chromatography (GC)-mass spectrometry achieving comparatively superior efficiency as compared to LC. Derivatisation was performed in 59% of the GC studies to afford more symmetrical signals and enhanced sensitivity. Although the contamination levels are well below the threshold set by governments, routinely biomonitoring is encouraged because of the possible accumulation of these contaminants in the human body and of their interplay with other xenoestrogens.

Towards tailored guidelines for microbial air quality in the food industry.

Airborne microorganisms in food processing environments pose a potential risk for food product contamination. Yet, the absence of established standards or guidelines setting quantitative limits on airborne microorganisms underscores a critical gap in current regulatory frameworks. This review seeks to explore the feasibility of establishing quantitative limits for airborne microorganisms in food processing facilities, aiming to provide evidence-based guidance to enhance food safety practices in the industry. The review begins by addressing the complexities of microbial air quality in the food industry through a general literature search covering sources of airborne microorganisms, factors affecting particle deposition, air sampling methods and preventive measures. Subsequently, it employs a structured approach to assess the significance of air quality and its impact on product quality. Utilizing the PRISMA method, relevant scientific literature from May 2002 to May 2022 was examined, resulting in 26 articles meeting inclusion criteria from a pool of 11,737 original research papers. Additionally, the review investigates existing probability models for assessing airborne contamination to enhance air quality risk assessment in food safety management systems. The literature reveals a lack of substantial evidence supporting a direct correlation between airborne microorganisms and food contamination. The absence of standardized air sampling methodologies in previous studies hinders the comparability and reliability of research findings. Additionally, the literature fails to establish a conclusive relationship between influencing factors such as total particle counts, temperature, relative humidity and airborne contamination. Contradictory probability models for quantifying airborne contamination, and the absence of tailored preventive measures, hinder effective control and undermine microbial contamination control in diverse food processing contexts. In conclusion, the development of numeric guidelines for airborne contamination necessitates a tailored approach, considering factors such as product characteristics and production context. By integrating risk assessment models into this process, a more thorough comprehension of contamination risks can be achieved, providing tailored guidance based on the identified risk levels for each product. Ongoing collaborative efforts are essential to develop evidence-based guidelines that effectively mitigate risks without incurring unnecessary costs.

Using Single-Particle Inductively Coupled Plasma Mass Spectrometry to Determine the Changes of Silver Nanoparticles in Bread Induced via Simulated Digestion.

Silver nanoparticles (AgNPs), widely used in various fields of technology as an antimicrobial agent, represent a new type of environmental pollutant. Through various routes, AgNPs might penetrate into agricultural crops and foodstuffs. It is important to know if AgNPs contained in food persist in digested food and are therefore available for entering the inner organs of the consumer's body. Using the technique of single-particle ICP-MS, we analysed the changes in the number and size distribution of AgNPs added to a sample of bread submitted to in vitro simulated gastrointestinal digestion. The majority of silver, in terms of mass, was transformed from the state of particles to the dissolved state during bread digestion, but the number of particles was reduced by 25% only. The most abundant particle size was reduced from 60 nm to 49 nm. Hence, a substantial part of transformed nanoparticles is still present in food digestate. This means that AgNPs consumed together with food can theoretically enter the inner cells of human body.

Identification and Visualization of Polystyrene Microplastics/Nanoplastics in Flavored Yogurt by Raman Imaging.

The contamination of food by microplastics has garnered widespread attention, particularly concerning the health risks associated with small-sized microplastics. However, detecting these smaller microplastics in food poses challenges attributed to the complexity of food matrices and instrumental and method limitations. Here, we employed Raman imaging for visualization and identification of polystyrene particles synthesized in polymerization reactions, ranging from 400 to 2600 nm. We successfully developed a quantitative model of particle size and concentration for polystyrene, exhibiting excellent fit (R2 of 0.9946). We established procedures for spiked flavored yogurt using synthesized polystyrene, providing fresh insights into microplastic extraction efficiency. Recovery rates calculated from models validated the method's feasibility. In practical applications, the assessment of the size, type, shape, and quantity of microplastics in unspiked flavored yogurt was conducted. The most common polymers found were polystyrene, polypropylene, and polyethylene, with the smallest polystyrene sizes ranging from 1 to 10 µm. Additionally, we conducted exposure assessments of microplastics in branded flavored yogurt. This study established a foundation for developing a universal method to quantify microplastics in food, covering synthesis of standards, method development, validation, and application.

Intentional Adulteration of Foods with Chemicals: Snapshot for 2009-2022.

Global occurrences of the intentional adulteration of food with a chemical toxicant culled from the literature and news reports from 2009 to 2022 were analyzed in terms of their ability to cause mass public health harm. A total of 76 intentional adulteration events that involved over 27 chemicals and 16 foods were identified. The chemicals used included pesticides, rat poisons, illicit drugs, and commercial chemicals. A total of 253 deaths and 4,887 illnesses were attributed to intentional adulteration events; there were deaths in 20% and illnesses in 50% of the events. Intentional adulteration during manufacturing, which accounted for 21 events (28%), resulted in 205 deaths (81%) and 3,572 illnesses (73%). Intentional adulteration at the food preparation node, which accounted for 17 events (22%), resulted in 39 deaths (15%) and 387 illnesses (8%). On-farm intentional adulteration, eight events (10%) resulted in 843 illnesses (17%) and no deaths. The perpetrators who were identified generally had legitimate access to the food, although in 63% of the cases studied, the perpetrator was not identified. Economically motivated adulteration and revenge resulted in over 80% of the deaths and illnesses.

It takes two to attach - endo-1,3-ß-d-glucanase as a potential receptor of mannose-independent, FimH-dependent Salmonella Typhimurium binding to spinach leaves.

Currently, fresh, unprocessed food has become a relevant element of the chain of transmission of enteropathogenic infections. To survive on a plant surface and further spread the infections, pathogens like Salmonella have to attach stably to the leaf surface. Adhesion, driven by various virulence factors, including the most abundant fim operon encoding type 1 fimbriae, is usually an initial step of infection, preventing physical removal of the pathogen. Adhesion properties of Salmonella's type 1 fimbriae and its FimH adhesin were investigated intensively in the past. However, there is a lack of knowledge regarding its role in interaction with plant cells. Understanding the mechanisms and structures involved in such interaction may facilitate efforts to decrease the risk of contamination and increase fresh food safety. Here, we applied Salmonella genome site-directed mutagenesis, adhesion assays, protein-protein interactions, and biophysics methods based on surface plasmon resonance to unravel the role of FimH adhesin in interaction with spinach leaves. We show that FimH is at least partially responsible for Salmonella binding to spinach leaves, and this interaction occurs in a mannose-independent manner. Importantly, we identified a potential FimH receptor as endo-1,3-ß-d-Glucanase and found that this interaction is strong and specific, with a dissociation constant in the nanomolar range. This research advances our comprehension of Salmonella's interactions with plant surfaces, offering insights that can aid in minimizing contamination risks and improving the safety of fresh, unprocessed foods.

Fluorescence Polarization Assays for Organic Compounds in Food Safety.

Elevated concentrations of toxic organic compounds observed in food products pose serious dangers to human health. Both natural and artificial pollutants can cause food contamination. The stages of food production, packaging, transportation, and storage can also largely cause the appearance of undesirable substances in food products. The health consequences of ingesting food containing toxic contaminants range from mild gastroenteritis to deaths resulting from dysfunctional internal organs and neurological syndromes. The World Health Organization (WHO) sets recommendations for the content of such chemicals in food, including a minimum allowable concentration considered safe for human consumption. However, the control of food products from chemical pollutants is necessary. Moreover, fast, sensitive, and inexpensive methods are needed to detect them at the point of need. Currently, immune analysis methods are most widely used to determine pollutants in food. The development of fluorescence polarization immunoassay (FPIA) methods in a competitive format is a powerful and modern tool for detecting organic molecules in various matrices, thereby making FPIA methods useful for food safety applications. Due to the availability of portable devices for measuring the fluorescence polarization signal, FPIA methods can be used at the point of need. The variety of fluorescent labels and recognizing elements (receptors, monoclonal and polyclonal antibodies, and nanobodies) permits fluorescence polarization (FP) assays to detect significantly lower limits of organic substances. The FP assay is a homogeneous, fast, and quantitative method. The development of various formats of FP assays makes them promising in determining food pollutants. This review summarizes publications on FP analyses for detecting organic contaminants (pesticides, hormones, toxins, antibiotics, and other pharmaceuticals) in food products during 2018-2023. Further, it demonstrates the prospects for using this method to determine pollutants at the point of need and for detecting high molecular weight substances, fungi, and bacterial infections during food safety inspections.

Antibiotic Residues in UK Foods: Exploring the Exposure Pathways and Associated Health Risks.

While the use of antibiotics has been reported as extensive in the rearing of agricultural animals, insufficient information is available on the antibiotic residues in animal products and the adverse impact that consistent low-level exposure to antibiotics might have on the human body and its microbiome. The aim of this study was to estimate the antibiotic concentrations that humans are exposed to via their diet using the concentration of antibiotics in animal food products and water and an online survey on dietary intake. A total of 131 participants completed the dietary intake survey, with the majority belonging to the omnivorous diet group (76.3%). Distinct dietary trends were observed in the omnivorous and unknown groups eating animal products, with specific food types dominating each meal: pork (e.g., ham) and dairy products (e.g., milk, yoghurt) during breakfast, beef (e.g., burgers) and chicken (e.g., chicken breast) products during lunch, and fish (e.g., salmon fillet) during dinner. In total, 34 different animal-based food and drink products were tested for the presence of ten different antibiotics. Of all the products tested, over 35% exceeded the acceptable daily antibiotic intake for amoxicillin, ampicillin, and enrofloxacin.