Biology-Based Synthesis of Nickel Single Atoms on the Surface of Geobacter sulfurreducens as an Efficient Electrocatalyst for Alkaline Water Electrolysis.

Single-atom metal catalysts are promising electrocatalysts for water electrolysis. Nickel-based electrocatalysts have shown attractive application prospects for water electrolysis. However, synthesizing stable Ni single atoms using chemical and physical approaches remains a practical challenge. Here, a facile and precise method for synthesizing stable nickel single atoms on the surface of Geobacter sulfurreducens using a microbial-mediated extracellular electron transfer (EET) process is demonstrated. It is shown that G. sulfurreducens can effectively anchor nickel single atoms on their surface. X-ray absorption near-edge structure and Fourier-transformed extended X-ray absorption fine structure spectroscopy confirm that the nickel single atom is coordinated to nitrogen in the cytochromes. The as-synthesized nickel single atoms on G. sulfurreducens exhibit excellent bifunctional catalytic properties for alkaline water electrolysis with low overpotential (η) to achieve current density (10 mA cm-2) for both hydrogen evolution reactions (η = 80 mV) and oxygen evolution reaction (η = 330 mV) with minimal catalyst loading of 0.0015 mg Ni cm-2. The nickel single-atom catalyst shows long-term stability at a constant electrode potential. This synthesis method based on the EET capability of electroactive bacteria provides a simple and scalable approach for producing low-cost and highly efficient nonnoble transition metal single-atom catalysts for practical applications.

Defying Gravity to Enhance Power Output and Conversion Efficiency in a Vertically Oriented Four-Electrode Microfluidic Microbial Fuel Cell.

High power output and high conversion efficiency are crucial parameters for microbial fuel cells (MFCs). In our previous work, we worked with microfluidic MFCs to study fundamentals related to the power density of the MFCs, but nutrient consumption was limited to one side of the microchannel (the electrode layer) due to diffusion limitations. In this work, long-term experiments were conducted on a new four-electrode microfluidic MFC design, which grew Geobacter sulfurreducens biofilms on upward- and downward-facing electrodes in the microchannel. To our knowledge, this is the first study comparing electroactive biofilm (EAB) growth experiencing the influence of opposing gravitational fields. It was discovered that inoculation and growth of the EAB did not proceed as fast at the downward-facing anode, which we hypothesize to be due to gravity effects that negatively impacted bacterial settling on that surface. Rotating the device during the growth phase resulted in uniform and strong outputs from both sides, yielding individual power densities of 4.03 and 4.13 W m-2, which increased to nearly double when the top- and bottom-side electrodes were operated in parallel as a single four-electrode MFC. Similarly, acetate consumption could be doubled with the four electrodes operated in parallel.

Influence of support materials on the electroactive behavior, structure and gene expression of wild type and GSU1771-deficient mutant of Geobacter sulfurreducens biofilms.

Geobacter sulfurreducens DL1 is a metal-reducing dissimilatory bacterium frequently used to produce electricity in bioelectrochemical systems (BES). The biofilm formed on electrodes is one of the most important factors for efficient electron transfer; this is possible due to the production of type IV pili and c-type cytochromes that allow it to carry out extracellular electron transfer (EET) to final acceptors. In this study, we analyzed the biofilm formed on different support materials (glass, hematite (Fe2O3) on glass, fluorine-doped tin oxide (FTO) semiconductor glass, Fe2O3 on FTO, graphite, and stainless steel) by G. sulfurreducens DL1 (WT) and GSU1771-deficient strain mutant (Δgsu1771). GSU1771 is a transcriptional regulator that controls the expression of several genes involved in electron transfer. Different approaches and experimental tests were carried out with the biofilms grown on the different support materials including structure analysis by confocal laser scanning microscopy (CLSM), characterization of electrochemical activity, and quantification of relative gene expression by RT-qPCR. The gene expression of selected genes involved in EET was analyzed, observing an overexpression of pgcA, omcS, omcM, and omcF from Δgsu1771 biofilms compared to those from WT, also the overexpression of the epsH gene, which is involved in exopolysaccharide synthesis. Although we observed that for the Δgsu1771 mutant strain, the associated redox processes are similar to the WT strain, and more current is produced, we think that this could be associated with a higher relative expression of certain genes involved in EET and in the production of exopolysaccharides despite the chemical environment where the biofilm develops. This study supports that G. sulfurreducens is capable of adapting to the electrochemical environment where it grows.

Transcriptomic insights unveil the crucial roles of cytochromes, NADH, and pili in Ag(I) reduction by Geobacter sulfurreducens.

Silver (Ag) is a pivotal transition metal with applications in multiple industries, necessitating efficient recovery techniques. Despite various proposed methods for silver recovery from wastewaters, challenges persist especially for low concentrations. In this context, bioreduction by bacteria like Geobacter sulfurreducens, offers a promising approach by converting Ag(I) to Ag nanoparticles. To reveal the mechanisms driving microbial Ag(I) reduction, we conducted transcriptional profiling of G. sulfurreducens under Ag(I)-reducing condition. Integrated transcriptomic and protein-protein interaction network analyses identified significant transcriptional shifts, predominantly linked to c-type cytochromes, NADH, and pili. When compared to a pilus-deficient strain, the wild-type strain exhibited distinct cytochrome gene expressions, implying specialized functional roles. Additionally, despite a down-regulation in NADH dehydrogenase genes, we observed up-regulation of specific downstream cytochrome genes, highlighting NADH's potential role as an electron donor in the Ag(I) reduction process. Intriguingly, our findings also highlight the significant influence of pili on the morphology of the resulting Ag nanoparticles. The presence of pili led to the formation of smaller and more crystallized Ag nanoparticles. Overall, our findings underscore the intricate interplay of cytochromes, NADH, and pili in Ag(I) reduction. Such insights suggest potential strategies for further enhancing microbial Ag(I) reduction.

Bioproduction of cerium-bearing magnetite and application to improve carbon-black supported platinum catalysts.

BACKGROUND: Biogeochemical processing of metals including the fabrication of novel nanomaterials from metal contaminated waste streams by microbial cells is an area of intense interest in the environmental sciences. RESULTS: Here we focus on the fate of Ce during the microbial reduction of a suite of Ce-bearing ferrihydrites with between 0.2 and 4.2 mol% Ce. Cerium K-edge X-ray absorption near edge structure (XANES) analyses showed that trivalent and tetravalent cerium co-existed, with a higher proportion of tetravalent cerium observed with increasing Ce-bearing of the ferrihydrite. The subsurface metal-reducing bacterium Geobacter sulfurreducens was used to bioreduce Ce-bearing ferrihydrite, and with 0.2 mol% and 0.5 mol% Ce, an Fe(II)-bearing mineral, magnetite (Fe(II)(III)2O4), formed alongside a small amount of goethite (FeOOH). At higher Ce-doping (1.4 mol% and 4.2 mol%) Fe(III) bioreduction was inhibited and goethite dominated the final products. During microbial Fe(III) reduction Ce was not released to solution, suggesting Ce remained associated with the Fe minerals during redox cycling, even at high Ce loadings. In addition, Fe L2,3 X-ray magnetic circular dichroism (XMCD) analyses suggested that Ce partially incorporated into the Fe(III) crystallographic sites in the magnetite. The use of Ce-bearing biomagnetite prepared in this study was tested for hydrogen fuel cell catalyst applications. Platinum/carbon black electrodes were fabricated, containing 10% biomagnetite with 0.2 mol% Ce in the catalyst. The addition of bioreduced Ce-magnetite improved the electrode durability when compared to a normal Pt/CB catalyst. CONCLUSION: Different concentrations of Ce can inhibit the bioreduction of Fe(III) minerals, resulting in the formation of different bioreduction products. Bioprocessing of Fe-minerals to form Ce-containing magnetite (potentially from waste sources) offers a sustainable route to the production of fuel cell catalysts with improved performance.

The Performance of a Modified Anode Using a Combination of Kaolin and Graphite Nanoparticles in Microbial Fuel Cells.

The bacterial anode in microbial fuel cells was modified by increasing the biofilm's adhesion to the anode material using kaolin and graphite nanoparticles. The MFCs were inoculated with G. sulfurreducens, kaolin (12.5 g·L-1), and three different concentrations of graphite (0.25, 1.25, and 2.5 g·L-1). The modified anode with the graphite nanoparticles (1.25 g·L-1) showed the highest electroactivity and biofilm viability. A potential of 0.59, 0.45, and 0.23 V and a power density of 0.54 W·m-2, 0.3 W·m-2, and 0.2 W·m-2 were obtained by the MFCs based on kaolin-graphite nanoparticles, kaolin, and bare anodes, respectively. The kaolin-graphite anode exhibited the highest Coulombic efficiency (21%) compared with the kaolin (17%) and the bare (14%) anodes. Scanning electron microscopy and confocal laser scanning microscopy revealed a large amount of biofilm on the kaolin-graphite anode. We assume that the graphite nanoparticles increased the charge transfer between the bacteria that are in the biofilm and are far from the anode material. The addition of kaolin and graphite nanoparticles increased the attachment of several bacteria. Thus, for MFCs that are fed with wastewater, the modified anode should be prepared with a pure culture of G. sulfurreducens before adding wastewater that includes non-exoelectrogenic bacteria.

Ferrous sulfide nanoparticles can be biosynthesized by sulfate-reducing bacteria: Synthesis, characterization and removal of heavy metals from acid mine drainage.

Ferrous sulfide nanoparticles (nFeS) have proven to be effective in removing heavy metals (HMs) from wastewater. One such approach, which has garnered much attention as a sustainable technology, is via the in situ microbial synthesis of nFeS. Here, a sulfate-reducing bacteria (SRB) strain, Geobacter sulfurreducens, was used to initially biosynthesize ferrous sulfide nanoparticles (SRB-nFeS) and thereafter remove HMs from acid mine drainage (AMD). SRB-nFeS was characterized by X-ray powder diffraction (XRD), scanning electron microscopy (SEM) coupled to an energy dispersive spectrometer (EDS), three-dimensional excitation-emission matrix (3D-EEM) spectroscopy, Fourier transform infrared (FTIR) spectroscopy and X-ray photoelectron spectroscopy (XPS). Such characterization showed that SRB mediated the reduction of SO42- to S2- to form nFeS, where the metabolized substances functioned as complexing agents which coordinated with nFeS to form biofunctional SRB-nFeS with improved stability. One advantage of this synthetic route was that the attachment of nFeS to the bacterial surface protected SRB cells from HM toxicity. Furthermore, due to a synergistic effect between nFeS and SRB, HM removal from both solution and AMD by SRB-nFeS was enhanced relative to the constituent components. Thus, after 5 consecutive cycles of HM removal, SRB-nFeS removed, Pb(Ⅱ) (92.6%), Cd(Ⅱ) (78.7%), Cu(Ⅱ) (76.0%), Ni(Ⅱ) (62.5%), Mn(Ⅱ) (62.2%), and Zn(Ⅱ) (88.5%) from AMD This study thus provides new insights into the biosynthesis of SRB-nFeS and its subsequent practical application in the removal of HMs from AMD.

A genetic engineering strategy to enhance outer membrane vesicle-mediated extracellular electron transfer of Geobacter sulfurreducens.

Bioelectrochemical systems (BESs) are unique devices that harness the metabolic activity of electroactive microorganisms (EAMs) to convert chemical energy stored in organic substrates into electrical energy. Enhancing electron transfer efficiency between EAMs and electrodes is the key to practical implementation of BESs. Considering the role of outer membrane vesicles (OMVs) in mediating electron transfer of EAMs, a genetic engineering strategy to achieve OMVs overproduction was explored to enhance electron transfer efficiency and the underlying mechanisms were investigated. This study constructed a mutant strain of Geobacter sulfurreducens that lacked the ompA gene encoding an outer membrane protein. Experimental results showed that the mutant strain produced more OMVs and possessed higher electron transfer efficiency in Fe(III) reduction, dye degradation and current generation in BESs than the wild-type strain. More cargoes such as c-type cytochromes, functional proteins, eDNA, polysaccharides and signaling molecules that might be favorable for electron transfer and biofilm formation were found in OMVs produced by ompA-deficient anodic biofilm, which possibly contributed to the improved electron transfer efficiency of ompA-deficient biofilm. The results indicate that overproduction of OMVs in EAMs might be a potential strategy to enhance BESs performance.

Graphene Fermi Level-Guided Attachment of Single Exoelectrogens and Induced Interfacial Doping.

Graphene's exceptional electronic and mechanical properties make it a promising material for bioelectronic applications; however, understanding its interaction with electrogenic bacteria is crucial to harness its full potential. This study investigates the interface between electrogenic bacteria and graphene with Raman spectroscopy by analyzing the distinctive spectral fingerprints to understand electron energy and distribution via this non-destructive and label-free method. We find that the presence of bacteria induces a distinct red-shift in the G peak positions of graphene, indicating electron doping. Correspondingly, the bacteria demonstrate a predilection for attachment on hole-rich sites on the graphene sheet, evidenced by the comparative analysis of pre- and post-spatial Raman mapping, revealing their consistent presence within the hole-doped 2D peak position range of 2673.89-2675.43 cm-1. This affinity of bacteria is due to the overall higher Fermi level (∼4.9 ± 0.2 eV) of these regions, which favors electron transfer. These findings demonstrate the potential of leveraging the graphene's electronic properties in engineering graphene-based biosensors. Tuning graphene's charge carrier concentration would enable the promotion or prevention of bacterial attachment, facilitating capture of specific bacteria or development of antimicrobial surfaces. This approach enables clean, efficient, and accurate study of graphene-based bacterial systems, driving significant advancements and enhancing their performance.

Bidirectional extracellular electron transfer pathways of Geobacter sulfurreducens biofilms: Molecular insights into extracellular polymeric substances.

The basis for bioelectrochemical technology is the capability of electroactive bacteria (EAB) to perform bidirectional extracellular electron transfer (EET) with electrodes, i.e. outward- and inward-EET. Extracellular polymeric substances (EPS) surrounding EAB are the necessary media for EET, but the biochemical and molecular analysis of EPS of Geobacter biofilms on electrode surface is largely lacked. This study constructed Geobacter sulfurreducens-biofilms performing bidirectional EET to explore the bidirectional EET mechanisms through EPS characterization using electrochemical, spectroscopic fingerprinting and proteomic techniques. Results showed that the inward-EET required extracellular redox proteins with lower formal potentials relative to outward-EET. Comparing to the EPS extracted from anodic biofilm (A-EPS), the EPS extracted from cathodic biofilm (C-EPS) exhibited a lower redox activity, mainly due to a decrease of protein/polysaccharide ratio and α-helix content of proteins. Furthermore, less cytochromes and more tyrosine- and tryptophan-protein like substances were detected in C-EPS than in A-EPS, indicating a diminished role of cytochromes and a possible role of other redox proteins in inward-EET. Proteomic analysis identified a variety of redox proteins including cytochrome, iron-sulfur clusters-containing protein, flavoprotein and hydrogenase in EPS, which might serve as an extracellular redox network for bidirectional EET. Those redox proteins that were significantly stimulated in A-EPS and C-EPS might be essential for outward- and inward-EET and warranted further research. This work sheds light on the mechanism of bidirectional EET of G. sulfurreducens biofilms and has implications in improving the performance of bioelectrochemical technology.

The varied roles of pilA-N, omcE, omcS, omcT, and omcZ in extracellular electron transfer by Geobacter sulfurreducens.

Geobacter sulfurreducens mediates extracellular electron transfer (EET) reactions with different substrates, such as solid-phase Fe(III)-containing minerals, anodes and the cells of Geobacter metallireducens. To compare their roles in EET, the pilA-N, omcE, omcS, omcT and omcZ genes of G. sulfurreducens were systematically deleted. All mutants showed impaired and varied ability to form biofilms on nonconductive surface. Deletion of omcE also impaired bacterial ability to reduce ferrihydrite, but its impacts on the ability for anode reduction and the co-culture of G. metallireducens-G. sulfurreducens were minimal. The mutant without omcS showed diminished ability to reduce ferrihydrite and to form the co-culture, but was able to regain its ability to reduce anodes. Deletion of omcT, omcZ or pilA-N alone impaired bacterial ability to reduce ferrihydrite and anodes and to form the co-culture. Deletion of all tested genes abolished bacterial ability to reduce ferrihydrite and anodes. Triple-deletion of all omcS, omcT and omcZ abolished the ability of G. sulfurreducens to co-culture with G. metallireducens. However, deletion of only omcZ or pilA-N or both omcS and omcT abolished the ability of G. sulfurreducens without hydrogenase gene hybL to co-culture with G. metallireducens, which show their indispensable roles in direct electron transfer from G. metallireducens to G. sulfurreducens. Thus, the roles of pilA-N, omcE, omcS, omcT and omcZ for G. sulfurreducens in EET vary substantially, which also suggest that possession of PilA-N and multiple cytochromes of different structures enables G. sulfurreducens to mediate EET reactions efficiently with substrates of different properties.

Bioelectricity production from the anodic inoculation of Geobacter sulfurreducens DL-1 bacteria in constructed wetlands-microbial fuel cells.

Environmental pollution problems caused by the use of fossil fuels have led to the search for renewable energy sources to mitigate greenhouse gas emissions. In addition, constructed wetlands-microbial fuel cells (CW-MFC) could contribute to sustainable development, considering that this technology focuses on the production of bioelectricity. One of the main challenges of CW-MFCs is to potentiate their bioelectrochemical performance. Therefore, this research used the Geobacter sulfurreducens DL-1 bacterium (biofilm) as a bioelectrocatalyst to increase bioelectricity generation. For this, three bioreactors were built as CW-MFCs, using Juncus effusus root exudates and Philodendron cordatum macrophytes as endogenous substrates. The biofilm was developed in a nutrient broth acetate fumarate and directly inoculated onto the anodes of each CW-MFC. The results of bioelectrochemical analyses showed that the biofilm generated more bioelectricity when it consumed the exudates of the Juncus effusus macrophyte, resulting in a maximum performance of 107 mW/m2 power density, -361 mV anodic potential, 290 mV cathodic potential, and 124 Ω internal resistance, using a concentration of 27.5 mg/L of total organic carbon as an endogenous substrate. The results determined that the quantity of root exudates consumed by the anodic biofilm is directly related to the production of bioelectricity in CW-MFCs.

Mechanisms of magnetic sensing and regulating extracellular electron transfer of electroactive bacteria under magnetic fields.

Electroactive bacteria can display notable plasticity in their response to magnetic field (MF), which prompted bioelectrochemical system as promising candidates for magnetic sensor applications. In this study, we explored the sensing and stimulatory effect of MF on current generation by Geobacter sulfurreducens, and elucidated the related molecular mechanism at the transcriptomic level. MF treatment significantly enhanced electricity generation and overall energy efficiency of G. sulfurreducens by 50 % and 22 %, respectively. The response of current to MFs was instantaneous and reversible. Cyclic voltammetry analysis of the anode biofilm revealed that the redox couples changed from -0.31 to -0.39 V (vs. Ag/AgCl), suggesting that MFs could alter electron transfer related components. Differential gene expression analysis further verified this hypothesis, genes associated with electron transfer were upregulated in G. sulfurreducens under MF treatment relative to the control group, specifically, genes encoding periplasmic c-type cytochromes (ppcA and ppcD), outer membrane cytochrome (omcF, omcZ, omcB), pili (pilA-C, pilM, and pilV2), and ribosome. The enhanced bacterial extracellular electron transfer process was also linked to the overexpression of the NADH dehydrogenase I subunit, the ABC transporter, transcriptional regulation, and ATP synthase. Overall, our findings shed light on the molecular mechanism underlying the effects of magnetic field stimuli on EAB and provide a theoretical basis for its further application in magnetic sensors and other biological system.

Conjugative plasmids inhibit extracellular electron transfer in Geobacter sulfurreducens.

Geobacter sulfurreducens is part of a specialized group of microbes with the unique ability to exchange electrons with insoluble materials, such as iron oxides and electrodes. Therefore, G. sulfurreducens plays an essential role in the biogeochemical iron cycle and microbial electrochemical systems. In G. sulfurreducens this ability is primarily dependent on electrically conductive nanowires that link internal electron flow from metabolism to solid electron acceptors in the extracellular environment. Here we show that when carrying conjugative plasmids, which are self-transmissible plasmids that are ubiquitous in environmental bacteria, G. sulfurreducens reduces insoluble iron oxides at much slower rates. This was the case for all three conjugative plasmids tested (pKJK5, RP4 and pB10). Growth with electron acceptors that do not require expression of nanowires was, on the other hand, unaffected. Furthermore, iron oxide reduction was also inhibited in Geobacter chapellei, but not in Shewanella oneidensis where electron export is nanowire-independent. As determined by transcriptomics, presence of pKJK5 reduces transcription of several genes that have been shown to be implicated in extracellular electron transfer in G. sulfurreducens, including pilA and omcE. These results suggest that conjugative plasmids can in fact be very disadvantageous for the bacterial host by imposing specific phenotypic changes, and that these plasmids may contribute to shaping the microbial composition in electrode-respiring biofilms in microbial electrochemical reactors.

Analysis and enhancement of the energy utilization efficiency of corn stover using strain Lsc-8 in a bioelectrochemical system.

The strain Lsc-8 can produce a current density of 33.08 µA cm-2 using carboxymethylcellulose (CMC) as a carbon source in a three-electrode configuration. A co-culture system of strain Lsc-8 and Geobacter sulfurreducens PCA was used to efficiently convert cellulose into electricity to improve the electricity generation capability of microbial fuel cells (MFCs). The maximum current density achieved by the co-culture with CMC was 559 µA cm-2, which was much higher than that of strain Lsc-8 using CMC as the carbon source. The maximum power density reached 492.05 ± 52.63 mW cm-2, which is much higher than that previously reported. Interaction mechanism studies showed that strain Lsc-8 had the ability to secrete riboflavin and convert cellulose into acetic acid, which might be the reason for the high electrical production performance of the co-culture system. In addition, to the best of our knowledge, a co-culture or single bacteria system using agricultural straw as the carbon source to generate electricity has not been reported. In this study, the maximum current density of the three-electrode system inoculated with strain Lsc-8 was 14.56 µA cm-2 with raw corn stover as the sole carbon source. Raw corn stover as a carbon source was also investigated for use in a co-culture system. The maximum current density achieved by the co-culture was 592 µA cm-2. The co-culture system showed a similar electricity generation capability when using raw corn stover and when using CMC. This research shows for the first time that a co-culture or single bacteria system can realize both waste biomass treatment and waste power generation.

Microbial Reduction of Antimony(V)-Bearing Ferrihydrite by Geobacter sulfurreducens.

The reduction of Sb(V)-bearing ferrihydrite by Geobacter sulfurreducens was studied to determine the fate of the metalloid in Fe-rich systems undergoing redox transformations. Sb(V) added at a range of concentrations adsorbed readily to ferrihydrite, and the loadings had a pronounced impact on the rate and extent of Fe(III) reduction and the products formed. Magnetite dominated at low (0.5 and 1 mol%) Sb(V) concentrations, with crystallite sizes decreasing at higher Sb loadings: 37-, 25-, and 17-nm particles for no-Sb, 0.5% Sb, and 1% Sb samples, respectively. In contrast, goethite was the dominant end product for samples with higher antimony loadings (2 and 5 mol%), with increased goethite grain size in the 5% Sb sample. Inductively coupled mass spectrometry (ICP-MS) analysis confirmed that Sb was not released to solution during the bioreduction process, and X-ray photoelectron spectroscopy (XPS) analyses showed that no Sb(III) was formed throughout the experiments, confirming that the Fe(III)-reducing bacterium Geobacter sulfurreducens cannot reduce Sb(V) enzymatically or via biogenic Fe(II). These findings suggest that Fe (bio)minerals have a potential role in limiting antimony pollution in the environment, even when undergoing redox transformations. IMPORTANCE Antimony is an emerging contaminant that shares chemical characteristics with arsenic. Metal-reducing bacteria (such as Geobacter sulfurreducens) can cause the mobilization of arsenic from Fe(III) minerals under anaerobic conditions, causing widespread contamination of aquifers worldwide. This research explores whether metal-reducing bacteria can drive the mobilization of antimony under similar conditions. In this study, we show that G. sulfurreducens cannot reduce Sb(V) directly or cause Sb release during the bioreduction of the Fe(III) mineral ferrihydrite [although the sorbed Sb(V) did alter the Fe(II) mineral end products formed]. Overall, this study highlights the tight associations between Fe and Sb in environmental systems, suggesting that the microbial reduction of Fe(III)/Sb mineral assemblages may not lead to Sb release (in stark contrast to the mobilization of As in iron-rich systems) and offers potential Fe-based remediation options for Sb-contaminated environments.

Multiple roles of released c-type cytochromes in tuning electron transport and physiological status of Geobacter sulfurreducens.

Dissimilatory metal-reducing bacteria (DMRB) can transfer electrons to extracellular insoluble electron acceptors and play important roles in geochemical cycling, biocorrosion, environmental remediation, and bioenergy generation. c-type cytochromes (c-Cyts) are synthesized by DMRB and usually transported to the cell surface to form modularized electron transport conduits through protein assembly, while some of them are released as extracellularly free-moving electron carriers in growth to promote electron transport. However, the type of these released c-Cyts, the timing of their release, and the functions they perform have not been unrevealed yet. In this work, after characterizing the types of c-Cyts released by Geobacter sulfurreducens under a variety of cultivation conditions, we found that these c-Cyts accumulated up to micromolar concentrations in the surrounding medium and conserved their chemical activities. Further studies demonstrated that the presence of c-Cyts accelerated the process of microbial extracellular electron transfer and mediated long-distance electron transfer. In particular, the presence of c-Cyts promoted the microbial respiration and affected the physiological state of the microbial community. In addition, c-Cyts were observed to be adsorbed on the surface of insoluble electron acceptors and modify electron acceptors. These results reveal the overlooked multiple roles of the released c-Cyts in acting as public goods, delivering electrons, modifying electron acceptors, and even regulating bacterial community structure in natural and artificial environments.

Continuous fixation of dissolved arsenite from flooded soil by cooperating ferrihydrite with Geobacter sulfurreducens.

The fixed arsenic in soil is easy to be released into the aquatic environment in the form of arsenite (As(III)) with high toxicity and mobility due to the eutrophication of environment under anaerobic conditions. However, As(III) is difficult to be fixed in situ continuously by traditional methods, especially for the most efficient fixation method by iron ores. Based on that Fe(II) could promote the fixation of As(III), this study investigated the possibility that Geobacter sulfurreducens (G. sulfurreducens) cooperates with ferrihydrite to fix released As(III) from flooded soil in a glass column continuously under anaerobic conditions. During 42 days of operation of reactors that simulated the actual flooded soil environment, the concentration of released As(III) in the reactor with adding G. sulfurreducens and ferrihydrite is always lower than that in reactors with adding ferrihydrite or no treatment. Compared with reactors without treatment, the accumulated content of released As(III) (2455.0 ± 313.1 µg) decreased by 39.4% in the reactor with adding G. sulfurreducens and ferrihydrite on the last day, while that in reactors with adding ferrihydrite only decreased by 11.6%, respectively. These were caused by the cooperation of G. sulfurreducens and ferrihydrite, which increased the relative abundance of iron-reducing microorganisms to inhibit metabolisms of As-reducing microorganisms, inhibited the quick release of As(III) from solid soil, and promoted the release of iron to accelerate the formation of stable secondary ores with As. This study could provide an environmentally friendly method to fix dissolved As(III) pollutants from soil continuously.

Methylmercury formation in biofilms of Geobacter sulfurreducens.

Introduction: Mercury (Hg) is a major environmental pollutant that accumulates in biota predominantly in the form of methylmercury (MeHg). Surface-associated microbial communities (biofilms) represent an important source of MeHg in natural aquatic systems. In this work, we report MeHg formation in biofilms of the iron-reducing bacterium Geobacter sulfurreducens. Methods: Biofilms were prepared in media with varied nutrient load for 3, 5, or 7 days, and their structural properties were characterized using confocal laser scanning microscopy, cryo-scanning electron microscopy and Fourier-transform infrared spectroscopy. Results: Biofilms cultivated for 3 days with vitamins in the medium had the highest surface coverage, and they also contained abundant extracellular matrix. Using 3 and 7-days-old biofilms, we demonstrate that G. sulfurreducens biofilms prepared in media with various nutrient load produce MeHg, of which a significant portion is released to the surrounding medium. The Hg methylation rate constant determined in 6-h assays in a low-nutrient assay medium with 3-days-old biofilms was 3.9 ± 2.0 ∙ 10-14 L ∙ cell-1 ∙ h-1, which is three to five times lower than the rates found in assays with planktonic cultures of G. sulfurreducens in this and previous studies. The fraction of MeHg of total Hg within the biofilms was, however, remarkably high (close to 50%), and medium/biofilm partitioning of inorganic Hg (Hg(II)) indicated low accumulation of Hg(II) in biofilms. Discussion: These findings suggest a high Hg(II) methylation capacity of G. sulfurreducens biofilms and that Hg(II) transfer to the biofilm is the rate-limiting step for MeHg formation in this systems.

Chances and challenges of long-distance electron transfer for cellular redox reactions.

Biological redox reactions often use a set-up in which final redox partners are localized in different compartments and electron transfer (ET) among them is mediated by redox-active molecules. In enzymes, these ET processes occur over nm distances, whereas multi-protein filaments bridge µm ranges. Electrons are transported over cm ranges in cable bacteria, which are formed by thousands of cells. In this review, we describe molecular mechanisms that explain how respiration in a compartmentalized set-up ensures redox homeostasis. We highlight mechanistic studies on ET through metal-free peptides and proteins demonstrating that long-distance ET is possible because amino acids Tyr, Trp, Phe, and Met can act as relay stations. This cuts one long ET into several short reaction steps. The chances and challenges of long-distance ET for cellular redox reactions are then discussed.