Diffusion Nuclear Magnetic Resonance Measurements on Cationic Gold (I) Complexes in Catalytic Conditions: Counterion and Solvent Effects.

The amount of free ions, ion pairs, and higher aggregate of the possible species present in a solution during the gold(I)-catalyzed alkoxylation of unsaturated hydrocarbon, i.e., ISIP (inner sphere ion pair) [(NHC)AuX] and OSIP (outer sphere ion pairs) [(NHC)Au(TME)X] [NHC 1,3-bis(2,6-di-isopropylphenyl)-imidazol-2-ylidene; TME = tetramethylethylene (2,3-bis methyl-butene); X- = Cl-, BF4-, OTf-; and OTs- BArF4- (ArF = 3,5-(CF3)2C6H3)], has been determined. The 1H and 19F DOSY NMR measurements conducted in catalytic conditions indicate that the dissociation degree (α) of the equilibrium ion pair/free ions {[(NHC)Au(TME)X] [(NHC)Au(TME)]+ + X-} depends on the nature of the counterion (X-) when chloroform is the catalytic solvent: while the compounds containing OTs- and OTf- as the counterion gave a low α (which means a high number of ion pairs) of 0.13 and 0.24, respectively, the compounds containing BF4- and BArF4- showed higher α values of 0.36 and 0.32, respectively. These results experimentally confirm previous deductions based on catalytic and theoretical data: the lower the α value, the greater the catalytic activity because the anion that can activate methanol during a nucleophilic attack, although the lower propensity to activate methanol of BF4- and BArF4-, as suggested by the DFT calculations, cannot be completely overlooked. As for the effect of the solvent, α increases as the dielectric constant increases, as expected, and in particular, green solvents with high dielectric constants show a very high α (0.90, 0.84, 0.80, and 0.70 for propylene carbonate, γ-valerolactone, acetone, and methanol, respectively), thus confirming that the moderately high activity of NHC-Au-OTf in these solvents is due to the specific effect of polar functionalities (O-H, C=O, O-R) in activating methanol. Finally, the DOSY measurements conducted in p-Cymene show the formation of quadrupole species: under these conditions, the anion can better exercise its 'template' and 'activating' roles, giving the highest TOF.

Gold-Catalyzed Diyne-Ene Annulation for the Synthesis of Polysubstituted Benzenes through Formal [3+3] Approach with Amide as the Critical Co-Catalyst.

The one-step synthesis of tetra-substituted benzenes was accomplished via gold-catalyzed diyne-ene annulation. Distinguished from prior modification methods, this novel strategy undergoes formal [3+3] cyclization, producing polysubstituted benzenes with exceptional efficiency.  The critical factor enabling this transformation was the introduction of amides, which were reported for the first time in gold catalysis as covalent nucleophilic co-catalysts.  This interesting protocol not only offers a new strategy to achieve functional benzenes with high efficiency, but also enlightens potential new reaction pathways within gold-catalyzed alkyne activation processes.

Highly Stable Carboranyl Ligated Gold Nano-catalysts for Regioselective Aromatic Bromination.

Achieving electronic/steric control and realizing selectivity regulation in nanocatalysis remains a formidable challenge, as the dynamic nature of metal-ligand interfaces, including dissolution (metal leaching) and structural reconstruction, poses significant obstacles. Herein, we disclose carboranyls (CBs) as unprecedented carbon-bonded functional ligands (Eads.CB-Au(111) = -2.90 eV) for gold nanoparticles (AuNPs), showcasing their exceptional stabilization capability that is attributed by strong Au-C bonds combined with B-H⋯Au interactions. The synthesized CB@AuNPs exhibit core(Aun)-satellite(CB2Au-) structure, showing high stability towards multiple stimuli (110oC, pH = 1-12, thiol etchants). In addition, different from conventional AuNP catalysts such as triphenylphosphine (PPh3) stabilized AuNPs, dissolution of catalytically active gold species was suppressed in CB@AuNPs under the reaction conditions. Leveraging these distinct features, CB@AuNPs realized outstanding p:o selectivities in aromatic bromination. Unbiased arenes including chlorobenzene (up to > 30:1), bromobenzene (15:1) and phenyl acrylate were examined using CB@AuNPs as catalysts to afford highly-selective p-products. Both carboranyl ligands and carboranyl derived counterions are crucial for such regioselective transformation. This work has provided valuable insights for AuNPs in realizing diverse regioselective transformations.

Gold(I)-Catalyzed Regioselective Synthesis of Indenylidene Derivatives via 1,5-Acryl Migration.

A novel gold (I)-catalyzed synthetic strategy has been achieved for an efficient construction of indenylidene derivatives from substituted 1,6-diynes. This reaction describes the unique reactivity of gold catalysis in facilitating the intramolecular [3,3]-sigmatropic rearrangement, 5-exo dig cyclization followed by 1,5-migration of acryl group, resulting in the formation of substituted indenylidenes. Various substituted indenylidenes were successfully synthesized with up to 92 % yields. In this protocol, two new C-C bonds were sequentially formed atom economically in one pot.

An Efficient and Scalable "Second Generation" Total Synthesis of the Marine Polyketide Limaol Endowed with Antiparasitic Activity.

The cluster of four skipped exo-methylene substituents on the "northern" wing of limaol renders this dinoflagellate-derived marine natural product unique in structural terms. This arguably non-thermodynamic array gains kinetic stability by virtue of populating local conformations which impede isomerization to a partly or fully conjugated polyene. This analysis suggested that the difficulties encountered during the late stages of our first total synthesis of this polyketide had not been caused by an overly fragile character of this unusual substructure; rather, an unfavorable steric microenvironment about the spirotricyclic core was identified as the likely cause. To remedy the issue, the protecting groups on this central fragment were changed; in effect, this amendment allowed all strategic and practical problems to be addressed. As a result, the overall yield over the longest linear sequence was multiplied by a factor of almost five and the material throughput increased more than eighty-fold per run. Key-to-success was a gold-catalyzed spirocyclization reaction; the reasons why a Brønsted acid cocatalyst is needed and the origin of the excellent levels of selectivity were delineated. The change of the protecting groups also allowed for much improved fragment coupling processes; most notably, the sequence of a substrate-controlled carbonyl addition reaction followed by Mitsunobu inversion that had originally been necessary to affix the southern tail to the core could be replaced by a reagent controlled asymmetric allylation. Finally, a much-improved route to the "northern" sector was established by leveraging the power of asymmetric hydrogenation of a 2-pyrone derivative. Limaol was found to combine appreciable antiparasitic activity with very modest cytotoxicity.

Regiodivergent Synthesis of 4- and 5-Sulfenyl Oxazoles from Alkynyl Thioethers.

The regiodivergent synthesis of 4- and 5-sulfenyl oxazoles from 1,4,2-dioxazoles and alkynyl thioethers has been achieved. Gold-catalysed conditions are used to favour the formation of 5-sulfenyl oxazoles via ß-selective attack of the nitrenoid relative to the sulfenyl group. In contrast, 4-sulfenyl oxazoles are formed by α-selective reaction under Brønsted acid conditions from the same substrates. The nature of stabilising gold-sulfur interactions have been investigated by natural bond orbital analysis, showing that the S→Au interactions are significantly stronger in the intermediate that favours the 5-sulfenyl oxazoles. A kinetic survey identifies catalyst inhibition processes. This study into the regiodivergent methods includes the development of telescoped annulation-oxidation protocols for regioselective access to oxazole sulfoxides and sulfones.

Solid-State Oxidation of Alcohols in Gold-Coated Milling Vessels via Direct Mechanocatalysis.

This paper presents a novel approach for the selective oxidation of alcohols to their corresponding aldehydes through direct mechanocatalysis, employing a gold-coated milling vessel as catalyst and air as the oxidation agent. By adjusting milling frequency, media, and duration, high catalytic efficiencies and selectivities are achieved. Remarkably, yields of up to 99 % are obtained for specific substrates, with a turnover number (TON) of 8200 and a turnover frequency (TOF) of 0.77 s-1, surpassing existing alternatives. Confirmation of the catalytic reaction indeed occurring on the milling tool surface was achieved through X-ray photoelectron spectroscopy (XPS).

Gold-Catalyzed Arylative Cope Rearrangement.

Cope rearrangements have garnered significant attention owing to their ability to undergo structural reorganization in stereoselective manner. While substantial advances have been achieved over decades, these rearrangements remained applicable exclusively to parent 1,5-hexadienes. Herein, we disclose the gold-catalyzed arylative Cope rearrangement of 1,6-heptadienes via a cyclization-induced [3,3]-rearrangement employing ligand-enabled gold redox catalysis. Detailed mechanistic investigations including several control experiments, cross-over experiment, HRMS analysis, 31P NMR and DFT studies have been performed to underpin the mechanism.

Gold-Catalysed Heck Reaction: Fact or Fiction? Correspondence on "Unlocking the Chain Walking Process in Gold Catalysis".

Two recent high-profile publications reported the formation of Heck-type arylated alkenes catalysed by MeDalPhosAuCl/AgOTf (J. Am. Chem. Soc. 2023, 145, 8810) and their cyclisation to tetralines (Angew. Chem. Int. Ed. 2023, e202312786). It was claimed that these were the first demonstrations in gold catalysis of alkene insertion into Au-aryl bonds, ß-H elimination and chain-walking by Au-H dications. We show here that in fact this chemistry is a two-stage process. Only the first step, the production of an alkyl triflate ester as the primary organic product by the well-known alkene heteroarylation sequence, involves gold. The subsequent formation of Heck-type olefins and their cyclisation to tetralines represent classical H+-triggered carbocationic chemistry. These steps proceed in the absence of gold with identical results. Literature claims of new gold reactivity such as chain walking by the putative [LAuH]2+ dication have no basis in fact.

Reaction-Driven Dynamic and Reversible Transformations of Au Single Atoms and Au-Zr Alloys on Zirconia for Efficient Acetylene Hydrochlorination.

Catalysis involving gold supported on metal oxides has undergone extensive examination. However, the nature of the catalytic site under actual reaction conditions and the role of the support continue to be vigorously debated. This study addresses these issues through experimental investigations and theoretical simulations. We explore a novel catalytic mechanism that employs dynamic single-atom catalysis for the hydrochlorination of acetylene. This catalytic mechanism occurs in defective ZrO2-supported Au-Zr single-atom alloys. Specifically, the dynamic single-atom catalysis is a result of the mobility of the gold cation, which is accelerated by Cl radicals and strongly couples with the abundant unsaturated surface sites of ZrO2 in a synergistic manner. As a result, the Au electronic structure dynamically evolves, leading to a decrease in the addition reaction energy barrier. Notably, the Au cation can detach from the Au-Zr alloy structure to catalyze the hydrochlorination of acetylene near the Zr-Ov-Zr sites and then reintegrate back into the Au-Zr alloy structure upon completion of the reaction. This study underscores the significance of dynamic active sites under reaction conditions and their pivotal role in catalysis.

Ligand effects, solvent cooperation, and large kinetic solvent deuterium isotope effects in gold(I)-catalyzed intramolecular alkene hydroamination.

Kinetic studies on the intramolecular hydroamination of protected variants of 2,2-diphenylpent-4-en-1-amine were carried out under a variety of conditions with cationic gold catalysts supported by phosphine ligands. The impact of ligand on gold, protecting group on nitrogen, and solvent and additive on reaction rates was determined. The most effective reactions utilized more Lewis basic ureas, and more electron-withdrawing phosphines. A DCM/alcohol cooperative effect was quantified, and a continuum of isotope effects was measured with low KIE's in the absence of deuterated alcoholic solvent, increasing to large solvent KIE's when comparing reactions in pure MeOH to those in pure MeOH-d4. The effects are interpreted both within the context of a classic gold π-activation/protodeauration mechanism and a general acid-catalyzed mechanism without intermediate gold alkyls.

Recent Advances in the Synthesis of Peptidomimetics via Ugi Reactions.

Peptidomimetics have been extensively explored in many area due to their ability to improve pharmacological qualities and interesting biological activities. Cycles could be incorporated in peptides to reduce their flexibility, often enhancing the affinity for a certain receptor. Many efforts have been made to synthesize various peptidomimetics. Among them, the Ugi reaction is a popular way for the synthesis of peptidomimetics because it provides peptide-like products. The Ugi reaction consists of the condensation of an aldehyde or ketone, a carboxylic acid, an amine, and an isocyanide usually giving a linear peptidomimetic. In order to obtain other linear, cyclic or polycyclic peptidomimetics, the acyclic products have to undergo additional transformations or cyclizations. This review covers the years from 2018-2023, regarding the synthesis of linear, cyclic and polycyclic peptidomimetics, employing Ugi reactions eventually followed by post-Ugi transformations. Organo-catalyzed reactions, base-promoted reactions, and metal-free reactions toward peptidomimetics are highlighted.

Chiral Auxiliary Approach for Gold(I)-Catalyzed Cyclizations.

Two different classes of stereoselective cyclizations have been developed using a chiral auxiliary approach with commercially available [JohnPhosAu(MeCN)SbF6 ] as catalyst. First, a stereoselective cascade cyclization of 1,5-enynes was achieved using the Oppolzer camphorsultam as chiral auxiliary. In this case, a one-pot cyclization-hydrolysis sequence was developed to directly afford enantioenriched spirocyclic ketones. Then, the stereoselective alkoxycyclization of 1,6-enynes was mediated by an Evans-type oxazolidinone. A reduction-hydrolysis sequence was selected to remove the auxiliary to give enantioenriched ß-tetralones. DFT studies confirmed that the steric clash between the chiral auxiliary and alkene accounts for the experimentally observed diastereoselective cyclization through the Si face.

Unlocking the Chain-Walking Process in Gold Catalysis.

The successful realization of gold-catalyzed chain-walking reactions, facilitated by ligand-enabled Au(I)/Au(III) redox catalysis, has been reported for the first time. This breakthrough has led to the development of gold-catalyzed annulation reaction of alkenes with iodoarenes by leveraging the interplay of chain-walking and π-activation reactivity mode. The reaction mechanism has been elucidated through comprehensive experimental and computational studies.

Urea-Functionalized Fe4 L6 Cages for Supramolecular Gold Catalyst Encapsulation to Control Substrate Activation Modes.

The excellent catalytic performances of enzymes in terms of activity and selectivity are an inspiration for synthetic chemists and this has resulted in the development of synthetic containers for supramolecular catalysis. In such containers the local environment and pre-organization of catalysts and substrates leads to control of the activity and selectivity of the catalyst. Herein we report a supramolecular strategy to encapsulate single catalysts in a urea-functionalized Fe4 L6 cage, which can co-encapsulate a functionalized urea substrate through hydrogen bonding. Distinguished selectivity is obtained, imposed by the cage as site isolation only allows catalysis through π activation of the substrate and as a result the selectivity is independent of catalyst concentration. The encapsulated catalyst is more active than the free analogue, an effect that can be ascribed to transitionstate stabilization rather than substrate pre-organization, as revealed by the MM kinetic data. The simple strategy reported here is expected to be of general use in many reactions, for which the catalyst can be functionalized with a sulfonate group required for encapsulation.

Gold-Catalyzed Cyclization of Yndiamides with Isoxazoles via α-Imino Gold Fischer Carbenes.

Gold catalysis is an important method for alkyne functionalization. Here we report the gold-catalyzed formal [3+2] aminative cyclization of yndiamides and isoxazoles in a direct synthesis of polysubstituted diaminopyrroles, which are important motifs in drug discovery. Key to this process is the formation, and subsequent cyclization, of an α-imino gold Fischer carbene, which represents a new type of gold carbene intermediate. The reaction proceeds rapidly under mild conditions, with high regioselectivity being achieved by introducing a subtle steric bias between the nitrogen substituents on the yndiamide. DFT calculations revealed that the key to this regioselectivity was the interconversion of isomeric gold keteniminiun ions via a low-barrier π-complex transition state, which establishes a Curtin-Hammett scenario for isoxazole addition. By using benzisoxazoles as substrates, the reaction outcome could be switched to a formal [5+2] cyclization, leading to 1,4-oxazepines.

Synthesis of Functionalized 3H-pyrrolo-[1,2,3-de] Quinoxalines via Gold-Catalyzed Intramolecular Hydroamination of Alkynes.

A gold-catalyzed protocol to obtain functionalized 3H-pyrrolo [1,2,3-de] quinoxalines from suitable substituted N-alkynyl indoles has been proposed. The mild reaction conditions were revealed to be compatible with different functional groups, including halogen, alkoxyl, cyano, ketone, and ester, allowing the isolation of title compounds with yields from good to high. A reaction mechanism has been proposed, and theoretical calculations have been provided to rationalize the final step of the hypothesized reaction mechanism. As quinoxaline-containing polycyclic compounds, this class of molecules may represent a valuable template in medicinal chemistry and material science.

Gold(I)-Catalyzed Ring-Closing Alkyne-Carbonyl Metathesis for the Synthesis of Butenolides.

Alkyne-carbonyl metathesis is a type of carbon-carbon forming reaction involving the construction a carbon-carbon double bond and a carbonyl group in one transformation. Herein, a Au(I)-catalyzed ring-closing alkyne-carbonyl metathesis protocol has been developed to make densely substituted γ-butenolides from propargyl α-ketoesters. It features 100 % atom economy, excellent substrate flexibility and benign functional group tolerance. Mechanistic studies demonstrate that the coordinative interaction between the gold catalyst and the alkyne might initiate the transfer of an oxygen atom and the formation of the carbon-carbon double bond. By using this gold-catalyzed ring-closing alkyne-carbonyl metathesis as a key step reaction, four naturally occurring butenolide-type compounds including decumbic acid (45 % yield for 3 steps), deoxyisosporothric acid (32 % yield for 5 steps), lichesterinic acid (34 % yield for 5 steps) and isomuronic acid (6 % yield for 8 steps) have been synthesized starting from commercially available starting materials.

Electrochemical Gold-Catalyzed 1,2-Difunctionalization of C-C Multiple Bonds.

Herein, we disclose the first report of 1,2-difunctionalization of C-C multiple bonds using electrochemical gold redox catalysis. By adopting the electrochemical strategy, the inherent π-activation and cross-coupling reactivity of gold catalysis are harnessed to develop the oxy-alkynylation of allenoates under external-oxidant-free conditions. Detailed mechanistic investigations such as 31 P NMR, control experiments, mass studies, and cyclic voltammetric (CV) analysis have been performed to support the proposed reaction mechanism.

Asymmetric Dearomatization of Phenols via Ligand-Enabled Cooperative Gold Catalysis.

By employing a chiral bifunctional phosphine ligand, a gold(I)-catalyzed efficient and highly enantioselective dearomatization of phenols is achieved via versatile metal-ligand cooperation. The reaction is proven to be remarkably general in scope, permitting substitutions at all four remaining benzene positions, accommodating electron-withdrawing groups including strongly deactivating nitro, and allowing carbon-based groups of varying steric bulk including tert-butyl at the alkyne terminus. Moreover, besides N-(o-hydroxyphenyl)alkynamides, the corresponding ynoates and ynones are all suitable substrates. Spirocyclohexadienone-pyrrol-2-ones, spirocyclohexadienone-butenolides, and spirocyclohexadenone-cyclopentenones are formed in yields up to 99 % and with ee up to 99 %.