New insights into membrane fouling in coagulation-ultrafiltration by cake characteristics analysis: A case study with PACl-Al13 and PACl.

Membrane fouling is a bottleneck issue that hindered the further application of ultrafiltration technology. To alleviate membrane fouling, coagulation-ultrafiltration (C-UF) process using polyaluminum chloride (PACl) and PACl-Al13 with high proportion of Al13O4(OH)247+ as coagulants, respectively, were investigated at various pH conditions. Results indicated that an increase in solution pH contributed to larger floc size and looser floc structure for both PACl and PACl-Al13. It was conducive to the formation of more porous cake, as evidenced by mean pore area and pore area distribution of cake, leading to lower reversible fouling. Furthermore, humic acid (HA) removal presented a trend of first increasing and then decreasing with the increase of pH. The optimal HA removal was achieved at pH 6 regardless of coagulant type, suggesting that the slightest irreversible fouling should be occurred at this point. Interestingly, the irreversible fouling with PACl coagulant achieved a minimum value at pH 9, while the minimal irreversible fouling with PACl-Al13 was observed at pH 6. We speculated that the cake formed by PACl could further intercept HA prior to UF process at alkaline pH. Furthermore, compared with PACl, PACl-Al13 had a stronger charge neutralization ability, thus contributing to more compact floc structure and higher HA removal at various pH conditions. By UF fractionation measurement, higher HA removal for PACl-Al13 was due to higher removal of HA with molecular weight less than 50 kDa.

Synthesis and crystal structures of two racemic 2-heteroaryl-3-phenyl-2,3-di-hydro-4H-pyrido[3,2-e][1,3]thia-zin-4-ones.

3-Phenyl-2-(thio-phen-3-yl)-2,3-di-hydro-4H-pyrido[3,2-e][1,3]thia-zin-4-one (C17H12N2OS2, 1) and 2-(1H-indol-3-yl)-3-phenyl-2,3-di-hydro-4H-pyrido[3,2-e][1,3]thia-zin-4-one 0.438-hydrate (C21H15N3OS·0.438H2O, 2) crystallize in space groups P21/n and C2/c, respectively. The asymmetric unit in each case is comprised of two parent mol-ecules, albeit of mixed chirality in the case of 1 and of similar chirality in 2 with the enanti-omers occupying the neighboring asymmetric units. Structure 2 also has water mol-ecules (partial occupancies) that form continuous channels along the b -axis direction. The thia-zine rings in both structures exhibit an envelope conformation. Inter-molecular inter-actions in 1 are defined only by C-H⋯O and C-H⋯N hydrogen bonds between crystallographically independent mol-ecules. In 2, hydrogen bonds of the type N-H⋯O between independent mol-ecules and C-H⋯N(π) type, and π-π stacking inter-actions between the pyridine rings of symmetry-related mol-ecules are observed.

Crystal structure determination and analyses of Hirshfeld surface, crystal voids, inter-molecular inter-action energies and energy frameworks of 1-benzyl-4-(methyl-sulfan-yl)-3a,7a-di-hydro-1H-pyrazolo-[3,4-d]pyrimidine.

The pyrazolo-pyrimidine moiety in the title mol-ecule, C13H12N4S, is planar with the methyl-sulfanyl substituent lying essentially in the same plane. The benzyl group is rotated well out of this plane by 73.64 (6)°, giving the mol-ecule an approximate L shape. In the crystal, C-H⋯π(ring) inter-actions and C-H⋯S hydrogen bonds form tubes extending along the a axis. Furthermore, there are π-π inter-actions between parallel phenyl rings with centroid-to-centroid distances of 3.8418 (12) Å. A Hirshfeld surface analysis of the crystal structure indicates that the most important contributions to the crystal packing are from H⋯H (47.0%), H⋯N/N⋯H (17.6%) and H⋯C/C⋯H (17.0%) inter-actions. The volume of the crystal voids and the percentage of free space were calculated to be 76.45 Å3 and 6.39%, showing that there is no large cavity in the crystal packing. Evaluation of the electrostatic, dispersion and total energy frameworks indicate that the cohesion of the crystal structure is dominated by the dispersion energy contributions.

Intra-articular injection of modified citrus pectin and hyaluronate gel induces synergistic effects in treating osteoarthritis.

We previously found that modified citrus pectin (MCP), an inhibitor of pro-inflammatory factor Galectin-3 (Gal-3), has significant anti-inflammatory and chondroprotective effects. In this study, a hyaluronate (HA) gel-based sustained release system of MCP (MCP-HA) was developed as an anti-inflammatory agent for chronic inflammation for osteoarthritis (OA) treatment. The MCP-HA gel was injected into the knee joint cavities of OA rabbit models induced by anterior cruciate ligament transection (ACLT) or modified Hulth method once a week for five weeks. We found that MCP-HA could improve the symptoms and signs of OA, protect articular cartilage from degeneration, suppress synovial inflammation, and therefore alleviate OA progression. Proteomic analysis of the synovial fluid obtained from the knee joints of OA rabbits revealed that MCP-HA synergistically regulated the levels of multiple inflammatory mediators and proteins involved in metabolic pathways. Taken together, our results demonstrate that the MCP-HA shows a synergistic effect of HA and MCP by modulating both inflammation and metabolic processes, thereby alleviating OA progression. The MCP-HA sustained release system has promising potential for long-term use in OA treatment.

Targeting hyaluronan metabolism-related molecules associated with resistant tumor-initiating cells potentiates chemotherapy efficacy in lung cancer.

The success of chemotherapy regimens in patients with non-small cell lung cancer (NSCLC) could be restricted at least in part by cancer stem cells (CSC) niches within the tumor microenvironment (TME). CSC express CD133, CD44, CD47, and SOX2, among other markers and factors. Analysis of public data revealed that high expression of hyaluronan (HA), the main glycosaminoglycan of TME, correlated positively with CSC phenotype and decreased disease-free interval in NSCLC patients. We aimed to cross-validate these findings on human and murine lung cancer cells and observed that CD133 + CSC differentially expressed higher levels of HA, HAS3, ABCC5, SOX2, and CD47 (p < 0.01). We modulated HA expression with 4-methylumbelliferone (4Mu) and detected an increase in sensitivity to paclitaxel (Pa). We evaluated the effect of 4Mu + chemotherapy on survival, HA metabolism, and CSC profile. The combination of 4Mu with Pa reduced the clonogenic and tumor-forming ability of CSC. Pa-induced HAS3, ABCC5, SOX2, and CD47 expression was mitigated by 4Mu. Pa + 4Mu combination significantly reduced in vivo tumor growth, enhancing animal survival and restoring the CSC profile in the TME to basal levels. Our results suggest that HA is involved in lung CSC phenotype and chemosensitivity, and its modulation by 4Mu improves treatment efficacy to inhibit tumor progression.

A novel nanohydroxyapatite/polyamide 66 strut for reducing subsidence after one-level anterior cervical corpectomy and fusion: a finite-element study.

BACKGROUND: The aim of this study is to introduce a novel nanohydroxyapatite/polyamide 66(n-HA/PA66)n strut to improve biomechanical performance and reduce subsidence. METHODS: One validated intact and 2 ACCF-simulated C3-C7 cervical spine models were developed (old strut: Group A, new strut: Group B). In the ACCF models, C5 underwent corpectomy and was fixed by an anterior cervical plate. Screw angles were categorized as 1 (0 ) and 2 (45 ) and divided into 4 groups, A1, A2, B1 and B2, for each model. An axial force of 74 N and a moment couple of 1.0 Nm were imposed on the C3 vertebra. The range of motion (ROM) of each segment and the stress distribution on the screw-vertebra interface, strut, and strut-endplate interface were recorded and analysed. RESULTS: There was no significant difference in ROM between Group A and Group B during bending, extension and rotation under 74 N axial pressure. The stress concentration on the strut body in Group A was higher than that in Group B. The peak stress values at the screw-vertebral interface in Groups A1 and A2 were higher than those in Groups B1 and B2, except for during extension and lateral bending. Under axial pressure, the peak stress values at the strut body-endplate interface during bending, extension and rotation were lower in the A1 and A2 groups than in the B1 and B2 groups. The Group B model showed much higher graft stress than the Group A model. CONCLUSIONS: Based on finite-element analysis, compared with the old strut, the novel strut showed better biomechanical performance at the screw-vertebra interface.

Mechanical loading on cell-free polymer composite scaffold enhances in situ regeneration of fully functional Achilles tendon in a rabbit model.

Traditional tendon engineering using cell-loaded scaffold has limited application potential due to the need of autologous cells. We hypothesize that potent mechanical loading can efficiently induce in situ Achilles tendon regeneration in a rabbit model by using a cell-free porous composite scaffold. In this study, melt-spinning was used to fabricate PGA (polyglycolic acid) and PLA (polylactic acid) filament fibers as well as non-woven PGA fibers. The PLA/PGA (4:2) filament fibers were further braided into a hybrid yarn，which was knitted into a PLA/PGA tubular mesh with potent mechanical property for sustaining natural tendon strain. The results showed that a complete cross-section of Achilles tendon created a model of full mechanical loading on the bridging scaffold, which could efficiently induce in situ tendon regeneration by promoting host cell infiltration, matrix production and tissue remodeling. Histologically, mechanical loading assisted in forming parallel aligned collagen fibers and tenocytes in a fashion similar to those of native tendon. Transmission electron microscope further demonstrated that mechanical strain induced collagen fibril development by increasing fibril diameter and forming bipolar structure, which resulted in enhanced mechanical properties. Interestingly, the synergistic effect between mechanical loading and hyaluronic acid modification was also observed on the induced tenogenic differentiation of infiltrated host fibroblasts. In conclusion, potent mechanical loading is the key inductive microenvironment for in situ tendon regeneration for this polymer-based composite scaffold with proper matrix modification, which may serve as a universal scaffold product for tendon regeneration.

Long-term 23-year Global Post-marketing Safety Surveillance Review of Delayed Complications with a Supportive Hyaluronic Acid Filler for Infraorbital Hollow Rejuvenation.

HARES is a supportive (high G') HA filler with a low degree of water affinity (gel swelling) and modification (<1% BDDE) that has a well-established safety and efficacy profile in the literature, especially for infraorbital hollow (IOH) rejuvenation. To further support the safety of this product, a long-term review of delayed-onset adverse events of interest (DAEIs) related to HARES was conducted using reports from a global post-marketing safety surveillance database over the past 23 years. This review demonstrated low reporting frequencies of delayed-onset nodules and inflammatory events, establishing a long-term safety profile for HARES that supports its continued use in clinical practice, especially for IOH rejuvenation.

P4HA2 promotes proliferation, invasion, and metastasis through regulation of the PI3K/AKT signaling pathway in oral squamous cell carcinoma.

Proline 4-hydroxylase 2 (P4HA2) is known for its hydroxylase activity, primarily involved in hydroxylating collagen precursors and promoting collagen cross-linking under physiological conditions. Although its overexpression influences a wide variety of malignant tumors' occurrence and development, its specific effects and mechanisms in oral squamous cell carcinoma (OSCC) remain unclear. This study focused on investigating the expression patterns, carcinogenic functions, and underlying mechanisms of P4HA2 in OSCC cells. Various databases, including TCGA, TIMER, UALCAN, GEPIA, and K-M plotter, along with paraffin-embedded samples, were used to ascertain P4HA2 expression in cancer and its correlation with clinicopathological features. P4HA2 knockdown and overexpression cell models were developed to assess its oncogenic roles and mechanisms. The results indicated that P4HA2 was overexpressed in OSCC and inversely correlated with patient survival. Knockdown of P4HA2 suppressed invasion, migration, and proliferation of OSCC cells both in vitro and in vivo, whereas overexpression of P4HA2 had the opposite effects. Mechanistically, the phosphorylation levels of the PI3K/AKT pathway were reduced following P4HA2 silencing. The study reveals that P4HA2 acts as a promising biomarker for predicting prognosis in OSCC and significantly affects metastasis, invasion, and proliferation of OSCC cells through the regulation of the PI3K/AKT signaling pathway.

CNS/PNS proteoglycans functionalize neuronal and astrocyte niche microenvironments optimizing cellular activity by preserving membrane polarization dynamics, ionic microenvironments, ion fluxes, neuronal activation, and network neurotransductive capacity.

Central and peripheral nervous system (CNS/PNS) proteoglycans (PGs) have diverse functional roles, this study examined how these control cellular behavior and tissue function. The CNS/PNS extracellular matrix (ECM) is a dynamic, responsive, highly interactive, space-filling, cell supportive, stabilizing structure maintaining tissue compartments, ionic microenvironments, and microgradients that regulate neuronal activity and maintain the neuron in an optimal ionic microenvironment. The CNS/PNS contains a high glycosaminoglycan content (60% hyaluronan, HA) and a diverse range of stabilizing PGs. Immobilization of HA in brain tissues by HA interactive hyalectan PGs preserves tissue hydration and neuronal activity, a paucity of HA in brain tissues results in a pro-convulsant epileptic phenotype. Diverse CS, KS, and HSPGs stabilize the blood-brain barrier and neurovascular unit, provide smart gel neurotransmitter neuron vesicle storage and delivery, organize the neuromuscular junction basement membrane, and provide motor neuron synaptic plasticity, and photoreceptor and neuron synaptic functions. PG-HA networks maintain ionic fluxes and microgradients and tissue compartments that contribute to membrane polarization dynamics essential to neuronal activation and neurotransduction. Hyalectans form neuroprotective perineuronal nets contributing to synaptic plasticity, memory, and cognitive learning. Sialoglycoprotein associated with cones and rods (SPACRCAN), an HA binding CSPG, stabilizes the inter-photoreceptor ECM. HSPGs pikachurin and eyes shut stabilize the photoreceptor synapse aiding in phototransduction and neurotransduction with retinal bipolar neurons crucial to visual acuity. This is achieved through Laminin G motifs in pikachurin, eyes shut, and neurexins that interact with the dystroglycan-cytoskeleton-ECM-stabilizing synaptic interconnections, neuronal interactive specificity, and co-ordination of regulatory action potentials in neural networks.

Effect of Platelet-Rich Fibrin Combined With Hyaluronic Acid on Bone Formation in Dental Implant Sockets: An In Vivo Study in Sheep.

OBJECTIVES: The goal was to evaluate the effect of the combined growth factor of hyaluronic acid (HA) and advanced platelet-rich fibrin (A-PRF) on acceleration and maturation of bone formation around titanium dental implants in the bone-free space (jumping distance) of an over-preparation socket. MATERIALS AND METHODS:  Thirty-two titanium dental implants were placed in four sheep and distributed into one control group (A) and three experimental groups (B, C, and D) in two different time periods. Each sheep received eight implants. The eight implants in each sheep were distributed into four groups. The first period was one month after the initial placement, 16 implants were used in two sheep. The second period was three months after the initial placement; another 16 implants were used in the other two sheep. All implants were placed in over-prepared implant sockets, resulting in minimal primary stability. In Group A: the space between the dental implant and the bone of the inner wall of the socket was left without a growth substrate material. In Group B: we added HA between the dental implant and the bone of the inner wall of the socket. In Group C: we added A-PRF between the dental implant and the bone of the inner wall of the socket. In Group D: we added a combination of HA and A-PRF between the dental implant and the bone of the inner wall of the socket. Data was collected for each group at one month and three months at the same time. A high-resolution, desktop micro-CT system (Bruker Skyscan 1275, Kontich, Belgium) was used to scan the specimens. The NRecon software (ver. 1.6.10.4, SkyScan) and CTAn (SkyScan) were used for the visualization and quantitative measurement of the samples. One-way analysis of variance (ANOVA) was used to compare the means of the four study groups in the same period. A post hoc test was used after ANOVA to compare the means of two samples at the same time. A p-value of ≤ 0.05 was considered statistically significant. RESULTS: After one month and three months of using combined HA and A-PRF on Group D, significant acceleration was observed in bone formation in all tests around dental implants compared with other groups, while no significant acceleration was observed when they were used separately; all three study groups showed significant results when compared with the control group. CONCLUSION: Our data showed that using a combination of HA and A-PRF had a significant effect on the acceleration of the bone formation and ossification process when added to bone-free space (jumping distance) around implants while leaving space without any growth substrates might delay the bone ossification process.

Comparison of the use of biocompatible materials and titanium in the treatment of midshaft clavicle fractures with a patient-specific plate: a finite element analysis study.

BACKGROUND: Clavicular midshaft fractures treated with titanium plates may encounter complications like implant failure. We assess if alternative biocompatible materials suchs as PLA, PLA/HA, PEEK offer comparable stability. Our study evaluates the biomechanical performance of these materials in surgical management of midshaft clavicle fractures. METHODS: We simulated a personalized fixation implant with four different materials and conducted finite element analysis in ANSYS to assess maximum von Mises stress (MvMs). RESULTS: The MvMs occurring on the plates, screws, clavicle, and fracture site were recorded. MvMs on titanium material at the 6th hole level (764.79 MPa) and the 6th screw level (503.38 MPa), with the highest stresses observed at 48.52 MPa on the lateral clavicle at the 1st hole level and 182.27 MPa on the medial clavicle at the 6th hole level. In PLA material analyses, the highest MvMs were observed at the 3rd hole level (340.6 MPa) and the 3rd screw level (157.83 MPa), with peak stresses at 379.63 MPa on the lateral clavicle fracture line and 505.44 MPa on the medial clavicle fracture line. In PLA/HA material analyses, the highest MvMs were at the 3rd hole (295.99 MPa) and 3rd screw (128.27 MPa), with peak stresses at 220.33 MPa on the lateral clavicle and 229.63 MPa on the medial clavicle fracture line. In PEEK material analyses, the highest MvMs were at the 3rd hole (234.74 MPa) and 6th screw (114.48 MPa), with peak stresses at 184.36 MPa on the lateral clavicle and 180.1 MPa on the medial clavicle. CONCLUSION: Our findings indicate that titanium material shows significantly higher stresses on plates and screws compared to those on the clavicle, suggesting a risk of implant failure. PLA and PLA/HA were inadequate for fixation. Although stress on the plate with PEEK material is higher than on the clavicle, it remains lower than titanium, indicating potential stability at fracture site. Further research is needed to confirm these findings.

CD52/FLAG and CD52/HA Fusion Proteins as Novel Magnetic Cell Selection Markers.

At present, the magnetic selection of genetically modified cells is mainly performed with surface markers naturally expressed by cells such as CD4, LNGFR (low affinity nerve growth factor receptor), and MHC class I molecule H-2Kk. The disadvantage of such markers is the possibility of their undesired and poorly predictable expression by unmodified cells before or after cell manipulation, which makes it essential to develop new surface markers that would not have such a drawback. Earlier, modified CD52 surface protein variants with embedded HA and FLAG epitope tags (CD52/FLAG and CD52/HA) were developed by the group of Dr. Mazurov for the fluorescent cell sorting of CRISPR-modified cells. In the current study, we tested whether these markers can be used for the magnetic selection of transduced cells. For this purpose, appropriate constructs were created in MigR1-based bicistronic retroviral vectors containing EGFP and DsRedExpress2 as fluorescent reporters. Cytometric analysis of the transduced NIH 3T3 cell populations after magnetic selection evaluated the efficiency of isolation and purity of the obtained populations, as well as the change in the median fluorescence intensity (MFI). The results of this study demonstrate that the surface markers CD52/FLAG and CD52/HA can be effectively used for magnetic cell selection, and their efficiencies are comparable to that of the commonly used LNGFR marker. At the same time, the significant advantage of these markers is the absence of HA and FLAG epitope sequences in cellular proteins, which rules out the spurious co-isolation of negative cells.

The recombinant vaccine of Lactobacillus plantarum elicits immune protection against H1N1 and H9N2 influenza virus infection.

Influenza A virus (IAV) causes annual epidemics and occasional pandemics, resulting in significant economic losses and numerous fatalities. Current vaccines, typically administered through injection, provide limited protection due to the frequent antigenic shift and drift of IAV strains. Therefore, the development of alternative broad-spectrum vaccine strategies is imperative. Lactic acid bacteria (LAB) represent promising candidates for vaccine engineering due to their low cost, high safety profile, and suitability for oral administration. In this study, we identified a strain of Lactobacillus plantarum (Lp) that is resistant to acid and bile salts and capable of colonizing the intestines of mice. Subsequently, we employed the RecE/T gene editing system to integrate headless hemagglutinins (mini-HA) into the genome of Lp, generating Lp-mini-HA-SP. Remarkably, immunization with Lp-mini-HA-SP elicited serum IgG antibody responses and conferred immune protection against H9N2 and H1N1 influenza virus challenges. Collectively, our findings offer a novel approach for the development of orally administered IAV vaccines and hold significant potential for future drug development endeavors.

Hyaluronic acid/PEO electrospun tube reduces tendon adhesion to levels comparable to native tendons - An in vitro and in vivo study.

A major problem after tendon injury is adhesion formation to the surrounding tissue leading to a limited range of motion. A viable strategy to reduce adhesion extent is the use of physical barriers that limit the contact between the tendon and the adjacent tissue. The purpose of this study was to fabricate an electrospun bilayered tube of hyaluronic acid/polyethylene oxide (HA/PEO) and biodegradable DegraPol® (DP) to improve the anti-adhesive effect of the implant in a rabbit Achilles tendon full laceration model compared to a pure DP tube. Additionally, the attachment of rabbit tenocytes on pure DP and HA/PEO containing scaffolds was tested and Scanning Electron Microscopy, Fourier-transform Infrared Spectroscopy, Differential Scanning Calorimetry, Water Contact Angle measurements, and testing of mechanical properties were used to characterize the scaffolds. In vivo assessment after three weeks showed that the implant containing a second HA/PEO layer significantly reduced adhesion extent reaching levels comparable to native tendons, compared with a pure DP implant that reduced adhesion formation only by 20 %. Tenocytes were able to attach to and migrate into every scaffold, but cell number was reduced over two weeks. Implants containing HA/PEO showed better mechanical properties than pure DP tubes and with the ability to entirely reduce adhesion extent makes this implant a promising candidate for clinical application in tendon repair.

Care Bundles to Improve Hemoperfusion Performance in Patients with Severe COVID-19: A Retrospective Study.

Background/Objectives: Hemoperfusion (HP) is employed to modulate cytokine storms in severe coronavirus disease 2019 (COVID-19) patients, requiring careful attention for success and safety. Therefore, we investigated whether our care bundles could enhance HP performance. Methods: We conducted a retrospective cohort study on adult patients (≥20 years old) with severe COVID-19 pneumonia. In the first wave (Phase I), we identified HP-related issues and addressed them with care bundles in the second wave (Phase II). The care bundles included early temperature control, precise hemodynamic monitoring, and clot prevention measures for the HP membrane. The HP success rate and associated adverse events (AEs) were assessed between the two phases. Results: The study included 60 HP (HA330) sessions from 27 cases (Phase I: 21 sessions from 9 cases; Phase II: 39 sessions from 18 cases). Patient characteristics and treatments for COVID-19 were similar, except for baseline body temperature (BT) and heart rate (HR). Phase II showed a higher success rate (67% vs. 89%, p = 0.19), although it did not reach statistical significance. Phase I recorded a significantly higher frequency of AEs (3 [IQR 1, 4] events/case vs. 1 [IQR 0, 2] events/case, p = 0.014). After implementing the care bundles, hypothermia significantly decreased (78% vs. 33%, p = 0.037), with an adjusted odds ratio of 0.15; 95% CI 0.02-0.95, p = 0.044 for baseline BT. Conclusions: Further exploration with a larger sample size is required to establish the advantages of care bundles. However, the bundles' implementation has significantly improved hypothermia prevention.

A tricalcium phosphate (TCP) and hydroxyapatite (HA) based light-cured biomaterial for vital pulp therapy.

OBJECTIVES: Evaluate a new light-cured material with better properties for vital pulp therapy. METHODS: Light-cured resin materials consisted of polyethylene glycol (600) diacrylate mixed with different ratios of TCP to HA. In addition to the temperature change (n = 5 for each subgroup) were tested, cell viability and Alizarin Red Staining (ARS) assay were also tested in vitro on human dental pulp cells (n = 6 for each subgroup). Lastly, the material was then compared with Biodentine and control groups in the molars of Wistar rats in vivo for histology assessment. RESULTS: The temperature change for the new materials were under 5 degrees Celsius. For the in vitro assessments, there was no significant difference on day 3 and day 7 for cell viability test. ARS assay showed significantly higher mineralized nodule formation when treated without induction medium for Group D and Biodentine on day 10 compared to Group C and control. On the contrary, Biodentine and control groups treated with induction medium showed significant higher mineralization than the new materials. Histology assessments demonstrated higher mineralized content in Group D and Biodentine on week 3 and week 6. The inflammatory cells in the dental pulp complex of the Biodentine group resolved on week 6 while the inflammation resolved in Group D on week 3. SIGNIFICANCE: The new material exhibits low heat production, low cytotoxicity, and good calcium ion release capability. Compared to traditional materials, it has shorter setting time and better aesthetic outcomes, making it highly suitable for use in vital pulp therapy.

Ginger extract loaded Fe2O3/MgO-doped hydroxyapatite: Evaluation of biological properties for bone-tissue engineering.

Since antiquity, the medicinal properties of naturally sourced biomolecules such as ginger (Zingiber officinale) extract are documented in the traditional Indian and Chinese medical systems. However, limited work is performed to assess the potential of ginger extracts for bone-tissue engineering. Our work demonstrates the direct incorporation of ginger extract on iron oxide-magnesium oxide (Fe2O3 and MgO) co-doped hydroxyapatite (HA) for enhancement in the biological properties. The addition of Fe2O3 and MgO co-doping system and ginger extract with HA increases the osteoblast viability up to ~ 1.4 times at day 11. The presence of ginger extract leads to up to ~ 9 times MG-63 cell viability reduction. The co-doping does not adversely affect the release of ginger extract from the graft surface in the biological medium at pH 7.4 for up to 28 days. Assessment of antibacterial efficacy according to the modified ISO 22196: 2011 standard method indicates that the combined effects of Fe2O3, MgO, and ginger extract lead to ~ 82 % more bacterial cell reduction, compared to the control HA against S. aureus. These ginger extract-loaded artificial bone grafts with enhanced biological properties may be utilized as a localized site-specific delivery vehicle for various bone tissue engineering applications.

Construction of ROS-Responsive Hyaluronic Acid Modified Paclitaxel and Diosgenin Liposomes and Study on Synergistic Enhancement of Anti-Ovarian Cancer Efficacy.

Purpose: Ovarian cancer is a fatal gynecologic malignancy with a high rate of abdominal metastasis. Chemotherapy still has a poor clinical prognosis for ovarian cancer patients, with cell proliferation and angiogenesis leading to invasion, migration, and recurrence. To overcome these obstacles, we constructed a novel HA-modified paclitaxel and diosgenin liposome (PEG-TK-HA-PDLPs) using two novel functional materials, DSPE-PEG2000-HA and DSPE-PEG2000-TK-PEG5000, to specifically deliver the drugs to the tumor site in order to reduce OC cell proliferation and anti-angiogenic generation, thereby inhibiting invasion and migration. Methods and Results: PEG-TK-HA-PDLPs were prepared by film dispersion, with ideal physicochemical properties and exhibits active targeting for enhanced cellular uptake. The ZIP synergy score for PTX and Dios was calculated using the online SynergyFinder software to be 3.15, indicating synergy. In vitro results showed that PEG-TK-HA-PDLPs were highly cytotoxic to ID8 cells, induced ID8 cell apoptosis, and inhibited ID8 cell migration and invasion. In vivo studies showed that PEG-TK-HA-PDLPs could prolong the circulation time in the blood, accumulate significantly in the tumor site, and effectively fight against angiogenesis with significant anti-tumor effects. Conclusion: The production of PEG-TK-HA-PDLPs is an effective strategy for the treatment of OC.

Legal analysis of South Korean cosmetic filler litigations for safer medical practices.

Cosmetic filler injections have gained popularity in recent years, but the rise in complications has led to an increase in legal disputes. This study analyzes civil court rulings related to cosmetic filler injection lawsuits in South Korea from 2007 to 2023. A retrospective case analysis was performed using a systematic database search, and a mixed-methods approach was employed for data analysis. The study examined 27 cases, revealing a high rate of liability findings against medical practitioners. Skin necrosis and blindness were the most common complications, and intravascular filler injection was recognized as negligence. Violation of informed consent was found in most cases, with mean compensation awards of ￦193,019,107 KRW ($142,831 USD) for first instance cases and ￦81,845,052 KRW ($60,564 USD) for second instance cases. The findings emphasize the importance of practitioner awareness, adherence to precautionary measures, and proactive prevention and management of complications. Collaboration among stakeholders is crucial for developing strategies that prioritize patient safety and minimize legal disputes in the aesthetic medicine industry. This study provides valuable insights for enhancing medical practices and safeguarding patient well-being in the field of cosmetic filler injections.