Surface crystallized supramolecular to achieve highly dispersed ultrafine nano-palladium in-situ deposition to promote thermal/electrocatalytic reduction.

To promote the greening and economization of industrial production, the development of advanced catalyst manufacturing technology with high activity and low cost is an indispensable part. In this study, nitrogen-doped hollow carbon spheres (NHCSs) were used as anchors to construct a supramolecular coating formed by the self-assembly of boron clusters and ß-cyclodextrin by surface crystallization strategy, with the help of the weak reducing agent characteristics of boron clusters, highly dispersed ultra-small nano-palladium particles were in-situ embedded on the surface of NHCSs. The deoxygenation hydrogenation of nitroaromatics and the reduction of nitrate to ammonia were used as the representatives of thermal catalytic reduction and electrocatalytic reduction respectively. The excellent properties of the constructed Pd/NHCSs were proved by the probe reaction. In the catalytic hydrogenation of nitroaromatics to aminoaromatics, the reaction kinetic rate and activation energy are at the leading level. At the same time, the constructed Pd/NHCSs can also electrocatalytically reduce nitrate to high value-added ammonia with high activity and selectivity, and the behavior of Pd/NHCSs high selectivity driving nitrate conversion was revealed by density functional theory and in situ attenuated total reflection Fourier transform infrared (ATRFTIR) technique. These results all reflect the feasibility and superiority of in-situ anchoring ultra-small nano-metals as catalysts by surface crystallization to build a supramolecular cladding with reducing properties, which is an effective way to construct high-activity and low-cost advanced catalysts.

Integrating CoP/Co heterojunction into nitrogen-doped carbon polyhedrons as electrocatalysts to promote polysulfides conversion in lithium-sulfur batteries.

Lithium-sulfur (Li-S) batteries have garnered extensive research interest as one of the most promising energy storage devices due to their ultra-high theoretical energy density. However, the sluggish reaction kinetics, abominable shuttling effect and inferior cycling stability severely restrict its practical application. Herein, a multifunctional CoP/Co@NC/CNT heterostructure host material was elaborately designed and synthesized by integrating CoP/Co heterojunction, N-doped carbon hollow polyhedrons (NC) and carbon nanotubes (CNTs). Specifically, the CoP/Co heterojunction can reconfigure the local electronic structure, resulting in a synergistic effect that enhances adsorption capacity and catalytic activity compared to CoP and Co alone. Furthermore, the CNTs-grafted NC not only provides multi-dimensional pathways for rapid electron transport and ion diffusion, but also physically restricts the diffusion of polysulfides during charge-discharge processes. Owing to these advantages, the battery assembled with the CoP/Co@NC/CNT/S cathode yields an impressive discharge specific capacity of 1479.9 mAh g-1 at 0.1C, and excellent capacity retention of 793.7 mAh g-1 over 500 cycles at 2C (∼85.5 % of initial capacity). The rational integration of multifunctional heterostructures could provide an effective strategy for designing high-efficiency nanocomposite electrocatalysts to promote sulfur redox kinetics in Li-S batteries.

Construction of a hollow heterojunction interface to accelerate the photocatalytic cleavage of lignin Cß-O bonds.

Photocatalytic splitting of the Cß-O bond is regarded as a prospective strategy for transforming lignin, and it is imperative to develop novel photocatalysts with effective photogenerated charges separation and solar absorption capacity. Herein, a novel hollow ZIF-8/CdS heterostructure photocatalyst was synthesized for the catalytic splitting of lignin Cß-O bonds. The photocatalytic cleavage rate of Cß-O bond of ligin ß-O-4 reached 30.3∙mmol∙h-1∙g-1 within 20 min under visible light exposure. It is noteworthy that the utilization of intricate natural lignin molecules in this photocatalytic system has yielded successful depolymerization. The DFT and XPS results indicate a potential unidirectional electron migration from ZIF-8 to CdS in ZIF-8/CdS composites transfer. This electron transport path follows the direct Z-scheme heterostructure mechanism, resulting in the generation of an internal electric field between ZIF-8 and CdS. Impressively, the synergistic combination of the hollow structure and Z-scheme heterostructure effectively enhances the efficiency of charge carrier separation and maintains a robust redox potential, thereby facilitating Cα-radical generation. This study proposes a novel photocatalyst design strategy that integrates hollow structures and Z-scheme heterojunctions, with the aim of targeting the depolymerization of the Cß-O bond in lignin.

Highly capacitive MXene film by incorporating poly(3,4-ethylenedioxythiophene) hollow spheres prepared through an interfacial oxidation polymerization.

Sheets stacking of Ti3C2Tx MXene dramatically reduces the ion-accessible sites and brings a sluggish reaction kinetics. While introducing transitional metal oxides or polymers in the MXene films could partially alleviate such issue, their enhanced performances are realized at the expense of electrode conductivity or cycling stability. Herein, we report an alternative spacer of conductive poly(3,4-ethylenedioxythiophene) (PEDOT) hollow spheres (HSs) which are fabricated by a facile template-assisted interfacial polymerization. The Fe3+ ions electrostatically adsorbed on the -SO3H groups of the sulfonated polystyrene spheres (S-PS) initiate the polymerization of uniform PEDOT shell, yielding uniform PEDOT HSs after dissolving the S-PS core. Introducing these PEDOT HSs in the MXene film generates the highly flexible MXene-PEDOT (MP) films featuring hierarchically porous network and high conductivity (283 S cm-1). Consequently, specific capacitance of 218 F g-1 at 3  mV s-1, along with a forty-folds decrease in relaxation time constant (1.0 vs 39.8 s) has been achieved. Moreover, the MP film also exhibits nearly thickness-independent capacitive performances with film thickness in the range of 10-46 µm. A maximal energy density of 21.2 µWh cm-2 at 1015 µW cm-2 together with 92 % capacitance retention over 5000 cycles are achieved for the MP-based solid-state supercapacitor. The intrinsic high conductivity, excellent mechanical flexibility and good structure integrity are responsible for such outstanding electrochemical behaviors.

Rational design of amorphous vanadium pentoxide and hollow porous carbon spheres hybrid for superior zinc-ion battery.

Aqueous zinc-ion batteries (AZIBs) are expected to be a promising large-scale energy storage system owing to their intrinsic safety and low cost. Nevertheless, the development of AZIBs is still plagued by the design and fabrication of advanced cathode materials. Herein, the amorphous vanadium pentoxide and hollow porous carbon spheres (AVO-HPCS) hybrid is elaborately designed as AZIBs cathode material by integrating vacuum drying and annealing strategy. Amorphous vanadium pentoxide provides abundant active sites and isotropic ion diffusion channels. Meanwhile, the hollow porous carbon sphere not only provides a stable conductive network, but also enhances the stability during charging/discharging process. Consequently, the AVO-HPCS exhibits a capacity of 474 mAh/g at 0.5 A/g and long-term cycle stability. Moreover, the corresponding reversible insertion/extraction mechanism is elucidated by ex-situ X-ray diffraction, X-ray photoelectron spectroscopy and transmission electron microscopy. Furthermore, the flexible pouch battery with AVO-HPCS cathode shows high comprehensive performance. Hence, this work provides insights into the development of advanced amorphous cathode materials for AZIBs.

Hollow dodecahedral Zn0.3Cd0.7S@NiCo-mixed metal oxide p-n heterojunction with high-efficiency photocatalytic hydrogen production activity.

The growing demand for clean and sustainable energy has driven extensive research into efficient photocatalysts for hydrogen production. However, many semiconductor photocatalysts in this field still face the challenges such as wide band gap, limited visible light absorption, and inefficient separation and transport of photoinduced charges. In this study, nickel-cobalt layered double hydroxide (NiCo-LDH) was synthesized using an "etch-and-grow" method with zeolitic imidazolate framework-67 (ZIF-67) as a sacrificial template, followed by high-temperature calcination to produce nickel-cobalt mixed metal oxide (NiCo-MMO). Zn0.3Cd0.7S quantum dots were used to modify NiCo-MMO resulting in a hollow dodecahedral Zn0.3Cd0.7S@NiCo-MMO composite photocatalyst. In hydrogen production performance test, the optimized Zn0.3Cd0.7S@NiCo-MMO exhibited excellent performance (8177.5 µmol·g-1·h-1) and demonstrated good cycling stability. The hollow dodecahedral structure of the Zn0.3Cd0.7S@NiCo-MMO enhanced the light trapping ability and provided large surface area. The p-n heterojunction formed within Zn0.3Cd0.7S@NiCo-MMO accelerated carrier separation and transfer, effectively inhibited the recombination of photogenerated electrons and holes, and significantly improved the hydrogen production activity.

Synergistic effect of oxygen defects and calabash-like hollow carbon matrix enables VO2 as high-performance cathode for zinc ion battery.

Vanadium dioxide (VO2) materials exhibit significant theoretical specific capacity, which is ascribed to multi-electron transfer reactions and unique tunneled structures. However, the low electronic conductivity and sluggish reaction kinetics of VO2 have impeded its further development. Hence, in this study, we employed a synergistic strategy of defect engineering and compositing with a calabash carbon matrix to reduce Zn2+ diffusion barriers and accelerate electron transfer. The VO2 cathode provided a high specific capacity at a low rate of 303 mA h g-1 at 0.1 A g-1 after 191 cycles, along with good rate performance (168 mA h g-1 at 10 A g-1) and satisfactory long-term stability (170 mA h g-1 at 1 A g-1 after 1100 cycles). The exhaustive structural analyses indicated that oxygen vacancies accelerated the Zn2+ diffusion rate, while a uniform calabash-like hollow carbon matrix improved electronic conductivity during cycling. Moreover, ex-situ measurements demonstrated that during discharge, the composite cathode transformed to layered Zn3+x(OH)2V2O7·2H2O, which then facilitated the subsequent intercalation of Zn2+. This cooperative strategy advances the practical application of aqueous zinc ion batteries by leveraging vanadium-based electrodes.

In-situ surface reconstruction of Co-based imidazole zeolite framework by Mo etching for superior water oxidation.

Although zeolitic imidazolate frameworks (ZIFs) possess the merits of orderly porosity, high permeability, and easy functionalization, the transformation of ZIFs into the real active species and the promotion of the catalytic efficiency and stability are still challenging. Herein, CoMo-based three-dimensional (3D) hollow nanocages composed of interconnected nanosheets are fabricated by in-situ etching metal-organic framework (ZIF-67) under the aid of MoO42-. X-ray photoelectron spectroscopy (XPS) and in-situ Raman confirm that Mo leaching can accelerate surface reconstruction and generate CoOOH active sites after continuous oxidation. Benefiting from the nanostructure and electronic properties after surface reconstruction, the engineered CoMo-30 exhibits the lowest overpotential of 280 mV at 30 mA cm-2 and robust stability over 110 h in 1 M KOH media for oxygen evolution reaction (OER), which significantly surpasses the other counterparts and commercial RuO2. Density functional theory (DFT) calculations indicate that CoMo-30 has a lower free energy of *O â†’ *OOH as rate determining step (RDS), suggesting that CoOOH sites play a crucial role in enhancing the activity and kinetics of OER. This work provides valuable insights into the rational design of hollow structures and the structure-composition-activity relationship during the electrochemical reaction process.

Electronegativity- induced cobalt-doped platinum hollow nanospheres with high CO tolerance for efficient methanol oxidation reaction.

Although Platinum (Pt)-based alloys have garnered significant interest within the realm of direct methanol fuel cells (DMFCs), there still exists a notable dearth in the exploration of the catalytic behavior of the liquid fuels on well-defined active sites and unavoidable Pt poisoning because of the adsorbed CO species (COads). Here, we propose an electronegativity-induced electronic redistribution strategy to optimize the adsorption of crucial intermediates for the methanol oxidation reaction (MOR) by introducing the Co element to form the PtCo alloys. The optimal PtCo hollow nanospheres (HNSs) exhibit excellent high-quality activity of 3.27 A mgPt-1, which is 11.6 times and 13.1 times higher than that of Pt/C and pure Pt, respectively. The in-situ Fourier transform infrared reflection spectroscopy validates that electron redistribution could weak CO adsorption, and subsequently decrease the CO poisoning adjacent the Pt active sites. Theoretical simulations result show that the introduction of Co optimize surface electronic structure and reduce the d-band center of Pt, thus optimized the adsorption behavior of COads. This study not only employs a straightforward method for the preparation of Pt-based alloys but also delineates a pathway toward designing advanced active sites for MOR via electronegativity-induced electronic redistribution.

Novel design of nickel cobalt boride nanosheets-decorated molybdenum disulfide hollow spheres as efficient battery-type materials of hybrid supercapacitors.

Transition metal borides (TMBs) with high theoretical capacitances and excellent electronic properties have attracted much attention as a promising active material of supercapacitors (SCs). However, TMB nanoparticles are prone to conduct self-aggregation, which significantly deteriorates the electrochemical performance and structural stability. To address the severe self-aggregation in TMBs and improve the active material utilization, it is imperative to provide a conductive substrate that promotes the dispersion of TMB during growths. In this work, sheet-like nickel cobalt boride (NCB) was grown on molybdenum disulfide (MoS2) hollow spheres (H-MoS2) by using simple template growth and chemical reduction methods. The resultant NCB/H-MoS2-50 was observed with uniform NCB nanosheets structure on the surface of the H-MoS2 and stronger MB bonding. After optimizing the loading amount of H-MoS2, the optimal composite (NCB/H-MoS2-50) modified nickel foam (NF) exhibits a superior specific capacity (1302 C/g) than that of the NCB electrode (957 C/g) at 1 A/g. Excellent rate capability of 84.8% (1104 C/g at 40 A/g) is also achieved by the NCB/H-MoS2-50 electrode. The extraordinary electrochemical performance of NCB/H-MoS2-50 is credited to the unique nanosheet-covered hollow spheres structure for facilitating ion diffusion and versatile charge storage mechanisms from the pseudocapacitive behavior of H-MoS2 and the Faradaic redox behavior of NCB. Furthermore, a hybrid SC is assembled with NCB/H-MoS2-50 and activated carbon (AC) electrodes (NCB/H-MoS2-50//AC), which operates in a potential window up to 1.7 V and delivers a high energy density of 76.8 W h kg-1 at a power density of 850 W kg-1. A distinguished cycling stability of 93.2% over 20,000 cycles is also obtained for NCB/H-MoS2-50//AC. These findings disclose the significant potential of NCB/H-MoS2-50 as a highly performed battery-type material of SCs.

Dual-pathway charge transfer mechanism of anatase/rutile TiO2-Ag3PO4 hollow photocatalyst promotes efficient degradation of pesticides.

Exploring high-performance photocatalysts still remains a big challenge due to poor charge separation efficiency. Herein, we prepare a novel anatase/rutile TiO2-Ag3PO4 hollow photocatalyst (A/R-TiO2-Ag3PO4) for addressing this challenge. Microstructural characterization and photoelectric measurements confirm that the synergy of hollow structure and dual-heterojunction can provide abundant active sites and boost efficient charge separation through dual-pathway charge transfer mechanism. The A/R-TiO2-Ag3PO4 photocatalyst exhibits the highest photocurrent density (15.25 µA cm-2), which is 8.4 and 5.2 times than that of A-TiO2-Ag3PO4 (1.82 µA cm-2) and P25-Ag3PO4 (2.93 µA cm-2), respectively. Photo-degradation experiment shows that A/R-TiO2-Ag3PO4 presents a high degradation percentage (98.7 %) of thiamethoxam (THX) within 30 min, which is 1.45 and 1.23 times than that of A-TiO2-Ag3PO4 (68.1 %) and P25-Ag3PO4 (80.7 %), respectively. Furthermore, the degradation percentage of THX by A/R-TiO2-Ag3PO4 is as high as 96.4 % after seven successive cycles, indicating excellent cycling stability. Therefore, this work provides a new insight into exploring other high-performance photocatalysts by combining hollow structure and dual-heterojunction.

An innovative double-Shell layer nitrogen and sulfur co-doped carbon-Encapsulated FeS composite for enhanced lithium-Ion battery performance.

FeS, with its high theoretical capacity and natural abundance, holds significant promise as an anode material for lithium-ion batteries (LIBs). However, its practical application is constrained by poor electrical conductivity and substantial volume expansion during cycling, which impair charge-discharge efficiency and cycling stability. To overcome these challenges, we developed a nitrogen and sulfur co-doped carbon-encapsulated FeS composite with a hollow double-layer structure (HDL-FeS@NSC). Utilizing sulfur spheres as a sacrificial template, our inside-out synthesis strategy produces a unique material design. The HDL-FeS@NSC composite exhibits significant improvements in electrochemical performance compared to pure FeS. These enhancements are due to its increased specific surface area, which facilitates lithium-ion diffusion; a shortened Li+ diffusion pathway; structural stability that mitigates volume expansion; and an optimized carbon layer that boosts conductivity. The HDL-FeS@NSC-70 anode demonstrates a specific capacity of 879.6 mAh/g after 600 cycles at 1.0 A/g and retains 558.0 mAh/g at 5.0 A/g. Additionally, the lithium storage mechanism has been thoroughly investigated using in-situ techniques. These results suggest that the HDL-FeS@NSC composite anode has the potential to significantly enhance lithium-ion battery performance, offering a promising solution for next-generation energy storage systems.

Boosting peroxymonosulfate activation via Fe-Cu bimetallic hollow nanoreactor derived from copper smelting slag for efficient degradation of organics: The dual role of Cu.

Valorization of iron-rich metallurgical slags in the construction of Fenton-like catalysts has an appealing potential from the perspective of sustainable development. For the first time, copper smelting slag (CSS) was utilized as the precursor to synthesize hollow sea urchin-like Fe-Cu nanoreactors (Cu1.5Fe1Si) to activate peroxymonosulfate (PMS) for chlortetracycline hydrochloride (CTC) degradation. The hyper-channels and nano-sized cavities were formed in the catalysts owing to the induction and modification of Cu, not only promoting the in-situ growth of silicates and the formation of cavities due to the etching of SiO2 microspheres, but also resulting the generation of nanotubes through the distortion and rotation of the nanosheets. It was found that 100 % CTC degradation rate can be achieved within 10 min for Cu1.5Fe1Si, 75 times higher than that of Cu0Fe1Si (0.0024 up to 0.18 M-1‧min-1). The unique nanoconfined microenvironment structure could enrich reactants in the catalyst cavities, prolong the residence time of molecules, and increase the utilization efficiency of active species. Density functional theory (DFT) calculations show that Cu1.5Fe1Si has strong adsorption energy and excellent electron transport capacity for PMS, and Fe-Fe sites are mainly responsible for the activation of PMS, while Cu assists in accelerating the Fe(II)/Fe(Ⅲ) cycle and promotes the catalytic efficiency. The excellent mineralization rate (83.32 % within 10 min) and efficient treatment of CTC in consecutive trials corroborated the high activity and stability of the Cu1.5Fe1Si. This work provides a new idea for the rational design of solid waste-based eco-friendly functional materials, aiming at consolidating their practical application in advanced wastewater treatment.

Green synthesis of sacrificial UV-sensitive core and biobased shell for obtaining optically hollow nanoparticles.

Hollow nanoparticles have been extensively studied in recent years. Obtaining such structures with biobased materials, following greener synthetic routes, is still challenging, especially if accurate particle dimensions are required. This work reports the use of an innovative hybrid silica core (Si@azo) containing UV-sensitive molecule, wrapped in biobased multilayer shell composed of polysaccharides. It is a promising strategy for obtaining optically hollow nanoparticles. Indeed, Si@azo cores have the ability to be partially degraded when irradiated with UV light. Combined with a well-controlled and monodisperse diameter, they provide a good basis for layer-by-layer assembly, leading to a multilayer shell with controlled composition and thickness. Finally, UV irradiation of such a core-shell structure is harmless to the polysaccharide shell, but does impact the hybrid silica core, as revealed by turbidity measurements, among other. Each step, i.e. core synthesis, shell addition, and core-shell irradiation, has been carefully characterized at the macro (Fourier-transform infrared spectroscopy - FTIR, Dynamic Light Scattering - DLS, Zeta-potential measurement, Surface Plasmon Resonance - SPR, turbidity) and microscale (Transmission and Scanning Electron Microscopies). Emphasis is put on how turbidity measurements can be related to the core refractive index (ncore), giving information on the state of core degradation and whether the core-shell particle is optically hollow.

Pt-Ru atomic alloys confined in mesoporous carbon hollow spheres for accelerating methanol oxidation.

Active and durable electrocatalysts are essential for commercializing direct methanol fuel cells. However, Pt-based catalysts, extensively utilized in the methanol oxidation reaction (MOR), are suffered from resource scarcity and CO poisoning, which degrade MOR activity severely. Herein, Pt1Rux bimetallic catalysts were synthesized by confining Pt1Rux alloys within the shells of mesoporous carbon hollow spheres (MCHS) via a vacuum-assisted impregnation method (Pt1Rux@MCHS). The confinement effect induced by mesoporous carbon hollow spheres resulted in a robust structure of Pt1Ru3@MCHS with an ultrafine dispersion of alloy nanoparticles. The experimental and theoretical results confirmed that the boosting electrocatalytic activity and stability of the MOR over Pt1Ru3@MCHS were contributed to the regulated electronic structure as well as the superior CO tolerance of atomic Pt site caused by the electronic interaction between single Pt atoms and Ru nanoparticles. This strategy is versatile for the rational design of Pt-based bimetallic catalysts and has a positive impact on MOR performance.

Biomimetic heat-localized and solar absorption-enhanced hollow structural nanofibrous membrane for clean water production from saline water and dye wastewater.

The rational design of material structures can be an effective approach to enhance the performance of solar-driven clean water production. In this study, a hollow structural nanofibrous membrane was developed by mimicking the hollow structure of polar bear hair using coaxial electrospinning. The shell layer consisted of carbon nanoparticles (C NPs) decorated CuO nanosheets (C@CuO), that exhibited photothermal conversion capacity. Meanwhile, the core layer containing hydrophilic polyvinylpyrrolidone (PVP) was eliminated to generate the hollow structure. The C NPs enhanced the membrane's light absorption to increase thermal energy harvesting, while the CuO nanosheets improved the membrane's wettability enhancing the water supply. Furthermore, the hollow structure limited air convection, prevented heat conduction, and minimized heat radiation, enabling heat localization to be achieved inside the membrane to suppress heat loss during evaporation. For 3.5 wt% saline water and actual dye wastewater, the C@CuO nanofibrous membrane achieved high evaporation rates of 1.36 kg·m-2·h-1 and 1.31 kg·m-2·h-1, respectively, under 1 sun illumination. Moreover, even after continuous 6-h evaporation tests, the evaporation rate of the C@CuO membrane remained virtually unchanged, highlighting its long-term stability with regard to salt resistance in real-world applications. Additionally, the remarkable flexibility of the C@CuO membrane offers convenience during operation and guarantees dimensional stability when it is subjected to external stresses. These discoveries should inspire subsequent research on developing delicate architectural materials and exploring their potential applications in various fields, including energy generation, clean water production, and thermal insulation.

Extraordinary synergy on 3D hierarchical porous Co-Cu nanocomposite for catalytic elimination of VOCs at low temperature and high space velocity.

It is still a challenge to develop hierarchically nanostructured catalysts with simple approaches to enhance the low-temperature catalytic activity. Herein, a set of mesoporous Co-Cu binary metal oxides with different morphologies were successfully prepared via a facile ammonium bicarbonate precipitation method without any templates or surfactants, which were further applied for catalytic removal of carcinogenic toluene. Among the catalysts with different ratios, the CoCu0.2 composite oxide presented the best performance, where the temperature required for 90% conversion of toluene was only 237°C at the high weight hour space velocity (WHSV) of 240,000 mL/(gcat·hr). Meanwhile, compared to the related Co-Cu composite oxides prepared by using different precipitants (NaOH and H2C2O4), the NH4HCO3-derived CoCu0.2 sample exhibited better catalytic efficiency in toluene oxidation, while the T90 were 22 and 28°C lower than those samples prepared by NaOH and H2C2O4 routes, respectively. Based on various characterizations, it could be deduced that the excellent performance was related to the small crystal size (6.7 nm), large specific surface area (77.0 m2/g), hollow hierarchical nanostructure with abundant high valence Co ions and adsorbed oxygen species. In situ DRIFTS further revealed that the possible reaction pathway for the toluene oxidation over CoCu0.2 catalyst followed the route of absorbed toluene → benzyl alcohol → benzaldehyde → benzoic acid → carbonate → CO2 and H2O. In addition, CoCu0.2 sample could keep stable with long-time operation and occur little inactivation under humid condition (5 vol.% water), which revealed that the NH4HCO3-derived CoCu0.2 nanocatalyst possessed great potential in industrial applications for VOCs abatement.

Charged functional groups modified porous spherical hollow carbon material as CDI electrode for salty water desalination.

As a new electrochemical technology, capacitive deionization (CDI) has been increasingly applied in environmental water treatment and seawater desalination. In this study, functional groups modified porous hollow carbon (HC) were synthesized as CDI electrode material for removing Na+ and Cl- in salty water. Results showed that the average diameter of HC was approximately 180 nm, and the infrared spectrum showed that its surface was successfully modified with sulfonic and amino groups, respectively. The sulfonic acid functionalized HC (HC-S) showed better electrochemical and desalting performance than the amino-functionalized HC (HCN), with a maximum Faradic capacity of 287.4 F/g and an adsorptive capacity of 112.97 mg/g for NaCl. Additionally, 92.63% capacity retention after 100 adsorption/desorption cycles demonstrates the excellent stability of HC-S. The main findings prove that HC-S is viable as an electrode material for desalination by high-performance CDI applications.

Cyclic catalysis of intratumor Fe3+/2+ initiated by a hollow mesoporous iron sesquioxide nanoparticle for ferroptosis therapy of large tumors.

Numerous nanoparticles have been utilized to deliver Fe2+ for tumor ferroptosis therapy, which can be readily converted to Fe3+via Fenton reactions to generate hydroxyl radical (•OH). However, the ferroptosis therapeutic efficacy of large tumors is limited due to the slow conversion of Fe3+ to Fe2+via Fenton reactions. Herein, a strategy of intratumor Fe3+/2+ cyclic catalysis is proposed for ferroptosis therapy of large tumors, which was realized based on our newly developed hollow mesoporous iron sesquioxide nanoparticle (HMISN). Cisplatin (CDDP) and Gd-poly(acrylic acid) macrochelates (GP) were loaded into the hollow core of HMISN, whose surface was modified by laccase (LAC). Fe3+, CDDP, GP, and LAC can be gradually released from CDDP@GP@HMISN@LAC in the acidic tumor microenvironment. The intratumor O2 can be catalyzed into superoxide anion (O2•-) by LAC, and the intratumor NADPH oxidases can be activated by CDDP to generate O2•-. The O2•- can react with Fe3+ to generate Fe2+, and raise H2O2 level via the superoxide dismutase. The generated Fe2+ and H2O2 can be fast converted into Fe3+ and •OH via Fenton reactions. The cyclic catalysis of intratumor Fe3+/2+ initiated by CDDP@GP@HMISN@LAC can be used for ferroptosis therapy of large tumors.

Controllable preparation of carbon coating Ge nanospheres with a cubic hollow structure for high-performance lithium ion batteries.

Germanium based nanomaterials are very promising as the anodes for the lithium ion batteries since their large specific capacity, excellent lithium diffusivity and high conductivity. However, their controllable preparation is still very difficult to achieve. Herein, we facilely prepare a unique carbon coating Ge nanospheres with a cubic hollow structure (Ge@C) via a hydrothermal synthesis and subsequent pyrolysis using low-cost GeO2 as precursors. The hollow Ge@C nanostructure not only provides abundant interior space to alleviate the huge volumetric expansion of Ge upon lithiation, but also facilitates the transmission of lithium ions and electrons. Moreover, experiment analyses and density functional theory (DFT) calculations unveil the excellent lithium adsorption ability, high exchange current density, low activation energy for lithium diffusion of the hollow Ge@C electrode, thus exhibiting significant lithium storage advantages with a large charge capacity (1483 mAh/g under 200 mA g-1), distinguished rate ability (710 mAh/g under 8000 mA g-1) as well as long-term cycling stability (1130 mAh/g after 900 cycles under 1000 mA g-1). Therefore, this work offers new paths for controllable synthesis and fabrication of high-performance Ge based lithium storage nanomaterials.