How long do bacteria, fungi, protozoa, and viruses retain their replication capacity on inanimate surfaces? A systematic review examining environmental resilience versus healthcare-associated infection risk by "fomite-borne risk assessment".

SUMMARYIn healthcare settings, contaminated surfaces play an important role in the transmission of nosocomial pathogens potentially resulting in healthcare-associated infections (HAI). Pathogens can be transmitted directly from frequent hand-touch surfaces close to patients or indirectly by staff and visitors. HAI risk depends on exposure, extent of contamination, infectious dose (ID), virulence, hygiene practices, and patient vulnerability. This review attempts to close a gap in previous reviews on persistence/tenacity by only including articles (n = 171) providing quantitative data on re-cultivable pathogens from fomites for a better translation into clinical settings. We have therefore introduced the new term "replication capacity" (RC). The RC is affected by the degree of contamination, surface material, temperature, relative humidity, protein load, organic soil, UV-light (sunlight) exposure, and pH value. In general, investigations into surface RC are mainly performed in vitro using reference strains with high inocula. In vitro data from studies on 14 Gram-positive, 26 Gram-negative bacteria, 18 fungi, 4 protozoa, and 37 viruses. It should be regarded as a worst-case scenario indicating the upper bounds of risks when using such data for clinical decision-making. Information on RC after surface contamination could be seen as an opportunity to choose the most appropriate infection prevention and control (IPC) strategies. To help with decision-making, pathogens characterized by an increased nosocomial risk for transmission from inanimate surfaces ("fomite-borne") are presented and discussed in this systematic review. Thus, the review offers a theoretical basis to support local risk assessments and IPC recommendations.

Investigating Microbial Contamination of Indoor Air, Environmental Surfaces, and Medical Equipment in a Southwestern Ethiopia Hospital.

Introduction: Healthcare-associated infections, primarily caused by microorganisms, are widespread in healthcare facilities. These infections pose a significant challenge, especially in low and middle-income countries, and have a detrimental impact on patient outcomes. It is crucial to assess the level of microbial load and associated factors to prevent the spread of these infections. The objective of this study was to assess the microbial load and identify the factors associated with it in various wards at Jimma Medical Center. Method: A cross-sectional study conducted at Jimma Medical Center. Indoor air samples were collected using the settle plate method with a 1/1/1 scheme. Inanimate surfaces and medical equipment were sampled using Swabs from a 10 × 10 cm area. A total of 268 samples were collected from 10 rooms. Pertinent information regarding the associated factors was gathered using an observational checklist. A multiple linear regression model was used to identify any associations with the microbial load. Result: Out of the total samples, 181 (67.5%) tested positive for culture, and 270 microbes were isolated. The average load of bacteria and fungi in the indoor air ranged from 124.4 to 1607 and 96 to 814.6 Colony-forming unit (CFU)/m3, respectively. The mean total aerobic colony counts of bacteria and fungi from all surfaces in the wards ranged from 5.25 to 43.3 CFU/cm2. Crowdedness [ß = 2.748 (95% Confidence Interval (CI): 1.057-4.44)], the presence of waste material [ß = 1.747 (95% CI: 0.213-3.282)], and an unclean room [ß = 2.505 (95% CI: 0.990-4.019)] were significantly associated with the microbial load. Conclusion: The microbial load detected in indoor air, inanimate surfaces and medical equipment was posing potential health risks. Consequently, it is recommended to implement regular microbial surveillance of the hospital environment and enhance the infection prevention program to mitigate these concerns.

A comparative study on the persistence and viability of SARS-CoV-2 wild-type and omicron variant on artificially contaminated surfaces: the role of fomites.

Indirect transmission of Severe Acute Respiratory Syndrome Coronavirus 2 (SARS-CoV-2) has been investigated but it is still not completely understood. The present study aimed to compare the persistence and viability of the lineage B.1 and omicron BA.1 subvariant in five daily-use materials to evaluate the role of fomites as a possible source of infection. Artificial contamination was performed in the first set of materials, ethylene vinyl acetate (EVA), cardboard, polystyrene, aluminium, and plastic. Further surfaces using BA.1 (glass, plexiglass, cotton, polyester, and tetrapak) were conducted. The persistence, viability of Vero E6 cell cultures and the residual infectivity of the two lineages were evaluated over 5 days. The results showed different stabilities between the tested matrices. In cotton and polyester, the RNA was undetectable in 24 and 48h post-contamination (p.c.), respectively, and the virus was not viable within 30 min, while in the other surfaces, both lineages, RNA was detectable until 120h p.c. A rapid decay of the viral load was revealed on cardboard, mostly for the omicron variant. Furthermore, on all the materials, longer stability of BA.1 was demonstrated, but showing a less intense CPE than the wild-type. EVA was the material that was able to better sustain virus stability as the virus developed CPE up to 72h p.c. In conclusion, the potential spread of SARS-CoV-2 through fomites is conceivable, albeit it is difficult to establish the real capacity to infect people. Nevertheless, thise information is fundamental to adopting the appropriate measures to mitigate the spread of SARS-CoV-2 and its variants.

Stability of SARS-CoV-2 on inanimate surfaces: A review.

The stability of SARS-CoV-2 for varying periods on a wide range of inanimate surfaces has raised concerns about surface transmission; however, there is still no evidence to confirm this route. In the present review, three variables affecting virus stability, namely temperature, relative humidity (RH), and initial virus titer, were considered from different experimental studies. The stability of SARS-CoV-2 on the surfaces of six different contact materials, namely plastic, metal, glass, protective equipment, paper, and fabric, and the factors affecting half-life period was systematically reviewed. The results showed that the half-life of SARS-CoV-2 on different contact materials was generally 2-10 h, up to 5 d, and as short as 30 min at 22 °C, whereas the half-life of SARS-CoV-2 on non-porous surfaces was generally 5-9 h d, up to 3 d, and as short as 4 min at 22 â„ƒ. The half-life on porous surfaces was generally 1-5 h, up to 2 d, and as short as 13 min at 22 °C. Therefore, the half-life period of SARS-CoV-2 on non-porous surfaces is longer than that on porous surfaces, and thehalf-life of the virus decreases with increasing temperature, whereas RH produces a stable negative inhibitory effect only in a specific humidity range. Various disinfection precautions can be implemented in daily life depending on the stability of SARS-CoV-2 on different surfaces to interrupt virus transmission, prevent COVID-19 infections, and avoid over-disinfection. Owing to the more stringent control of conditions in laboratory studies and the lack of evidence of transmission through surfaces in the real world, it is difficult to provide strong evidence for the efficiency of transmission of the contaminant from the surface to the human body. Therefore, we suggest that future research should focus on exploring the systematic study of the entire transmission process of the virus, which will provide a theoretical basis for optimizing global outbreak prevention and control measures.

Real-life lack of evidence of viable SARS-CoV-2 transmission via inanimate surfaces: The SURFACE study.

INTRODUCTION: Although the potential role of inanimate surfaces in SARS-CoV-2 transmission has yet to be adequately assessed, it is still routine practice to apply deep and expensive environmental disinfection protocols. The aim of this study was to verify the presence of viable virus on different surfaces exposed to droplets released by coughing in SARS-CoV-2 RNA positive patients. METHODS: Patients admitted to hospital with a positive SARS-CoV-2 real-time (RT)-PCR swab were asked to cough on steel, cardboard, plastic and their hands. Surfaces were tested at baseline (T0) and at different timepoints thereafter using swabs dipped in medium, and quickly seeded on VERO E6 cells that were checked every other day for cytopathic effect (CPE). Laboratory-propagated SARS-CoV-2 strains were examined at the same time points and on identical materials. RESULTS: Ten RNA-positive patients were enrolled into the study. The median cycle threshold value was 20.7 (range 13-28.3). Nasopharyngeal swabs from 3 of the patients yielded viable virus 2-10 days post-inoculation. However, in none of the patients was it possible to isolate viable SARS-CoV-2 from sputum under identical experimental conditions. A CPE was instead already visible using laboratory-propagated SARS-CoV-2 strains at 20', 60', 180' while an effect at 24 h required a 6-day incubation. CONCLUSION: The evidence emerging from this real-life study suggests that droplets delivered by SARS-CoV-2 infected patients on common inanimate surfaces did not contain viable virus. In contrast, and in line with several laboratory-based experiments, in vitro adapted viruses could survive and grow on the same fomites.

Occurrence of bacteria belonging to the genus Enterococcus and Staphylococcus on inanimate surfaces of selected hospital facilities and their nosocomial significance.

OBJECTIVES: This work aimed to determine the representation and resistance of bacteria belonging to the genus Staphylococcus and Enterococcus on inanimate surfaces of two selected workplaces of the University Hospital of L. Pasteur in Kosice (UHLP) and to investigate their importance in the hospital environment. The men's ward of the Department of Internal Medicine (DIM) and the Department of Anaesthesiology and Intensive Care (DAIC) were chosen. METHODS: Using sterile sampling kits, a total of 182 swabs were collected from the inanimate surfaces of both UHLP workplaces. The swabs were then transported to a microbiological laboratory and inoculated onto sterile culture media (blood agar containing 5% ram erythrocytes). After culturing (24-48 hours, in a thermostat at constant temperature 37 °C), bacterial colonies were identified by mass spectrometry on a MALDI TOF MS. Bacteria belonging to the genera Staphylococcus and Enterococcus were subsequently separated from the spectrum of identified bacteria. Nosocomial significant strains of staphylococci (Staphylococcus epidermidis, Staphylococcus haemolyticus, Staphylococcus aureus) and all isolated enterococci were subjected to susceptibility testing for selected antibiotics using the disk diffusion method - E-tests. RESULTS: Several members of the genus Staphylococcus were identified from the inanimate surfaces of both workplaces. These were mainly coagulase-negative strains - Staphylococcus epidermidis (45), Staphylococcus capitis (34), Staphylococcus haemolyticus (20), Staphylococcus hominis (45), Staphylococcus pasteuri (2), Staphylococcus sroph (1), Staphylococcus simulans (3), and Staphylococcus warneri (4). Staphylococcus aureus strains were also identified (2). Nosocomial significant isolates were tested for susceptibility to the antibiotics cefoxitin (FOX) and oxacillin (OXA). Two members of the genus Enterococcus - Enterococcus faecium (7) and Enterococcus faecalis (8) were isolated. All strains were subject to vancomycin susceptibility testing using the disk method.

Inanimate Surfaces as a Source of Hospital Infections Caused by Fungi, Bacteria and Viruses with Particular Emphasis on SARS-CoV-2.

The carriers of nosocomial infections are the hands of medical personnel and inanimate surfaces. Both hands and surfaces may be contaminated as a result of contact with the patient, their body fluids, and touching contaminated surfaces in the patient's surroundings. Visually clean inanimate surfaces are an important source of pathogens. Microorganisms have properties thanks to which they can survive in unfavorable conditions, from a few days to several months. Bacteria, viruses and fungi are able to transmit from inanimate surfaces to the skin of the patient and the medical staff. These pathogens include SARS-CoV-2, which can survive on various types of inanimate surfaces, being a potential source of infection. By following the recommendations related to washing and disinfecting hands and surfaces, and using appropriate washing and disinfecting agents with a broad biocidal spectrum, high material compatibility and the shortest duration of action, we contribute to breaking the chain of nosocomial infections.

Environmental testing for SARS-CoV-2 in three tertiary-care hospitals during the peak of the third COVID-19 wave.

Contamination of surfaces has been implicated in transmission of severe acute respiratory syndrome coronavirus 2 (SARS-CoV-2). We tested by real-time PCR for SARS-CoV-2 contamination environmental samples from three hospitals during the peak of the third pandemic wave. Overall, 19 of 463 (4.1%) samples tested positive: 12 of 173 (6.9%) samples from a COVID-19 hospital, 3 of 177 (1.7%) samples from a non-COVID-19 hospital, and 4 of 113 (3.5%) samples from a pediatric hospital with dedicated COVID-19 clinics. Most positive samples originated from emergency departments (EDs) (47.3%) and the intensive care units (ICUs) (26.3%) of the COVID-19 hospital. Positive samples belonged almost exclusively (18/19) to the highly transmissible B.1.1.7 cluster, that might explain environmental contamination at this stage of the pandemic. The frequency and efficiency of disinfection in high-risk patient areas, such as EDs and ICUs, should be reinforced, especially during this period where highly transmissible variants of concern are widespread.

Environmental Detection of SARS-CoV-2 Virus RNA in Health Facilities in Brazil and a Systematic Review on Contamination Sources.

SARS-CoV-2 environmental monitoring can track the rate of viral contamination and can be used to establish preventive measures. This study aimed to detect by RT-PCR the presence of SARS-CoV-2 from inert surface samples in public health settings with a literature review about surface contamination and its burden on spread virus. Samples were collected from health settings in Curitiba, Brazil, between July and December 2020. A literature review was conducted using PRISMA. A total of 711 environmental surface samples were collected from outpatient areas, dental units, doctors' offices, COVID-19 evaluation areas, and hospital units, of which 35 (4.9%) were positive for SARS-CoV-2 RNA. The frequency of environmental contamination was higher in primary care units than in hospital settings. The virus was detected on doctors' personal items. Remarkably, the previously disinfected dental chair samples tested positive. These findings agree with those of other studies in which SARS-CoV-2 was found on inanimate surfaces. Detection of SARS-CoV-2 RNA on surfaces in public health settings, including those not meant to treat COVID-19, indicates widespread environmental contamination. Therefore, the intensification of disinfection measures for external hospital areas may be important for controlling community COVID-19 dissemination.

A systematic review of human coronaviruses survival on environmental surfaces.

The current pandemic caused by Severe Acute Respiratory Syndrome Coronavirus 2 (SARS-CoV-2) has led people to implement preventive measures, including surface disinfection and use of alcohol-based hand gel, in order to avoid viral transmission via fomites. However, the role of surface transmission is still debated. The present systematic review aims to summarize all the evidence on surface survival of coronaviruses infecting humans. The analysis of 18 studies showed the longest coronavirus survival time is 28 days at room temperature (RT) on different surfaces: polymer banknotes, vinyl, steel, glass, and paper banknotes. Concerning SARS-CoV-2 human infection from contaminated surfaces, dangerous viral load on surfaces for up to 21 days was determined on polymer banknotes, steel, glass and paper banknotes. For viruses other than SARS-CoV-2, the longest period of survival was 14 days, recorded on glass. Environmental conditions can affect virus survival, and indeed, low temperatures and low humidity support prolonged survival of viruses on contaminated surfaces independently of surface type. Furthermore, it has been shown that exposure to sunlight significantly reduces the risk of surface transmission. Although studies are increasingly investigating the topic of coronavirus survival, it is difficult to compare them, given the methodology differences. For this reason, it is advisable to define a reference working protocol for virus survival trials, but, as an immediate measure, there is also a need for further investigations of coronavirus survival on surfaces.

Persistence of Pathogens on Inanimate Surfaces: A Narrative Review.

For the prevention of infectious diseases, knowledge about transmission routes is essential. In addition to respiratory, fecal-oral, and sexual transmission, the transfer of pathogens via surfaces plays a vital role for human pathogenic infections-especially nosocomial pathogens. Therefore, information about the survival of pathogens on surfaces can have direct implications on clinical measures, including hygiene guidelines and disinfection strategies. In this review, we reviewed the existing literature regarding viral, bacterial, and fungal persistence on inanimate surfaces. In particular, the current knowledge of the survival time and conditions of clinically relevant pathogens is summarized. While many pathogens persist only for hours, common nosocomial pathogens can survive for days to weeks under laboratory conditions and thereby potentially form a continuous source of transmission if no adequate inactivation procedures are performed.

Bacterial contamination rates and drug susceptibility patterns of bacteria recovered from medical equipment, inanimate surfaces, and indoor air of a neonatal intensive care unit and pediatric ward at Hawassa University Comprehensive Specialized Hospital, Ethiopia.

Introduction: Bacterial contamination of medical equipment, inanimate surfaces, and indoor air of the hospital environment is the main source of hospital-acquired infection in developing countries. Objective: The aim of this study was to determine the bacterial contamination rates for medical equipment, inanimate surfaces, and indoor air, and the drug susceptibility profiles of bacteria, in the neonatal intensive care unit and pediatric ward of Hawassa University Comprehensive Specialized Hospital (HUCSH). Methods: A hospital-based cross-sectional study was carried out from October 20 to December 30, 2020. Samples were collected from medical equipment, inanimate surfaces, and indoor air of the neonatal intensive care unit and pediatric ward, and processed using standard microbiological methods. Data entry and analysis were carried out using SPSS software version 25.0. Results: Of the total samples collected, 171 (74.7%; 95% CI 68.4‒83.5) were culture positive. These comprised 33 (58.9%) of samples taken from medical equipment, 26 (42.6%) from inanimate surfaces, and 112 (100%) from indoor air . Micrococcus species (41.3%), Acinetobacter species (13.7%), and Klebsiella pneumoniae (10.2%) were the most commonly isolated bacteria. Conclusions: High bacterial contamination rates of medical equipment, inanimate surfaces, and indoor air of the neonatal intensive care unit and pediatric ward were found. Most of the bacterial species isolated were known causative agents of hospital-acquired infection. Around one-quarter of the bacteria were multidrug resistant.

Stability of SARS-CoV-2 and other coronaviruses in the environment and on common touch surfaces and the influence of climatic conditions: A review.

Although the unprecedented efforts the world has been taking to control the spread of the human coronavirus disease (COVID-19) and its causative aetiology [severe acute respiratory syndrome coronavirus 2 (SARS-CoV-2)], the number of confirmed cases has been increasing drastically. Therefore, there is an urgent need for devising more efficient preventive measures, to limit the spread of the infection until an effective treatment or vaccine is available. The preventive measures depend mainly on the understanding of the transmission routes of this virus, its environmental stability, and its persistence on common touch surfaces. Due to the very limited knowledge about SARS-CoV-2, we can speculate its stability in the light of previous studies conducted on other human and animal coronaviruses. In this review, we present the available data on the stability of coronaviruses (CoVs), including SARS-CoV-2, from previous reports to help understand its environmental survival. According to available data, possible airborne transmission of SARS-CoV-2 has been suggested. SARS-CoV-2 and other human and animal CoVs have remarkably short persistence on copper, latex and surfaces with low porosity as compared to other surfaces like stainless steel, plastics, glass and highly porous fabrics. It has also been reported that SARS-CoV-2 is associated with diarrhoea and that it is shed in the faeces of COVID-19 patients. Some CoVs show persistence in human excrement, sewage and waters for a few days. These findings suggest a possible risk of faecal-oral, foodborne and waterborne transmission of SARS-CoV-2 in developing countries that often use sewage-polluted waters in irrigation and have poor water treatment systems. CoVs survive longer in the environment at lower temperatures and lower relative humidity. It has been suggested that large numbers of COVID-19 cases are associated with cold and dry climates in temperate regions of the world and that seasonality of the virus spread is suspected.

Contamination of inert surfaces by SARS-CoV-2: Persistence, stability and infectivity. A review.

Undoubtedly, there is a tremendous concern regarding the new viral strain "Severe Acute Respiratory Syndrome Coronavirus-2" (SARS-CoV-2) and its related disease known as COVID-19. The World Health Organization has stated that SARS-CoV-2 is mainly transmitted from person-to-person close contact, as well as by small aerosol respiratory droplets. Moreover, the results of some recent studies about the role of air pollution on the spread and lethality of the novel coronavirus suggest that air contaminants could be also a transmission pathway of the virus. On the other hand, indirect transmission of the virus cannot be discarded. Among many sources of indirect transmission, there is the contamination of inert/inanimate surfaces. This manuscript was aimed at reviewing the scientific literature currently available in PubMed and Scopus. The results of the reviewed studies point out that SARS-CoV-2 can last on different surfaces from hours to a few days. However, rapid SARS-CoV-2 inactivation is possible by applying commonly available chemicals and biocides on inanimate surfaces. Consequently, although the presence of SARS-CoV-2 on inanimate surfaces can represent a potential route of transmission, appropriate disinfection measures should reduce the possibilities of coronavirus transmission, and hence, significantly decrease the risks of COVID-19.

The role of environmental factors to transmission of SARS-CoV-2 (COVID-19).

The current outbreak of the novel coronavirus disease 2019 (COVID-19) in more than 250 countries has become a serious threat to the health of people around the world. Human-to-human transmission of the Severe acute respiratory syndrome coronavirus 2 (SARS-CoV-2) occurs most often when people are in the incubation stage of the disease or are carriers and have no symptoms. Therefore, in this study, was discussed the role of environmental factors and conditions such as temperature, humidity, wind speed as well as food, water and sewage, air, insects, inanimate surfaces, and hands in COVID-19 transmission. The results of studies on the stability of the SARS-CoV-2 on different levels showed that the resistance of this virus on smooth surfaces was higher than others. Temperature increase and sunlight can facilitate the destruction of SARS-COV-2 and the stability of it on surfaces. When the minimum ambient air temperature increases by 1 °C, the cumulative number of cases decreases by 0.86%. According to the latest evidence, the presence of coronavirus in the sewer has been confirmed, but there is no evidence that it is transmitted through sewage or contaminated drinking water. Also, SARS-COV-2 transmission through food, food packages, and food handlers has not been identified as a risk factor for the disease. According to the latest studies, the possibility of transmitting SARS-COV-2 bioaerosol through the air has been reported in the internal environment of ophthalmology. The results additionally show that infectious bio-aerosols can move up to 6 feet. There have been no reports of SARS-COV-2 transmission by blood-feeding arthropods such as mosquitoes.

Persistence of coronaviruses on inanimate surfaces and their inactivation with biocidal agents.

Currently, the emergence of a novel human coronavirus, SARS-CoV-2, has become a global health concern causing severe respiratory tract infections in humans. Human-to-human transmissions have been described with incubation times between 2-10 days, facilitating its spread via droplets, contaminated hands or surfaces. We therefore reviewed the literature on all available information about the persistence of human and veterinary coronaviruses on inanimate surfaces as well as inactivation strategies with biocidal agents used for chemical disinfection, e.g. in healthcare facilities. The analysis of 22 studies reveals that human coronaviruses such as Severe Acute Respiratory Syndrome (SARS) coronavirus, Middle East Respiratory Syndrome (MERS) coronavirus or endemic human coronaviruses (HCoV) can persist on inanimate surfaces like metal, glass or plastic for up to 9 days, but can be efficiently inactivated by surface disinfection procedures with 62-71% ethanol, 0.5% hydrogen peroxide or 0.1% sodium hypochlorite within 1 minute. Other biocidal agents such as 0.05-0.2% benzalkonium chloride or 0.02% chlorhexidine digluconate are less effective. As no specific therapies are available for SARS-CoV-2, early containment and prevention of further spread will be crucial to stop the ongoing outbreak and to control this novel infectious thread.

Potential role of inanimate surfaces for the spread of coronaviruses and their inactivation with disinfectant agents.

The novel human coronavirus SARS-CoV-2 has become a global health concern causing severe respiratory tract infections in humans. Human-to-human transmissions have been described, probably via droplets but possibly also via contaminated hands or surfaces. In a recent review on the persistence of human and veterinary coronaviruses on inanimate surfaces it was shown that human coronaviruses such as Severe Acute Respiratory Syndrome (SARS) coronavirus, Middle East Respiratory Syndrome (MERS) coronavirus or endemic human coronaviruses (HCoV) can persist on inanimate surfaces like metal, glass or plastic for up to 9 days. Some disinfectant agents effectively reduce coronavirus infectivity within 1 minute such 62%-71% ethanol, 0.5% hydrogen peroxide or 0.1% sodium hypochlorite. Other compounds such as 0.05%-0.2% benzalkonium chloride or 0.02% chlorhexidine digluconate are less effective. An effective surface disinfection may help to ensure an early containment and prevention of further viral spread.

Persistence, transmission, and infectivity of SARS-CoV-2 in inanimate environments.

Currently, the emergence of a novel coronavirus, referred to as SARS-CoV-2, has become a global health concern which cause severe respiratory tract infections in humans. Person-to-person transmission of SARS-CoV-2 has occurred across the globe, within a short period of SARS-CoV-2 emergence. The goal of this analysis is to summarize in various inanimate surfaces and environments information about the frequency, persistence, potential dissemination, and infectivity of SARS-CoV-2. Most respiratory viruses, including coronaviruses, SARS-CoVs, or influenza may persist for a few days on the surfaces or objects. The length of tenacity on various inanimate surfaces depends on the environmental and growth conditions and overall survival rate could range from minutes to month time. The SARS-CoV-2 may survive and maintain infectivity in the air in unventilated buses for 30 â€‹min. As no specific vaccines or therapeutic drugs are available for this contagious virus, timely prevention measures would be crucial to control the future outbreak of this infectious disease. Precautionary strategies such as wearing masks and frequent washing hands are effective to mitigate COVID-19. Following careful consideration of the above-mentioned scenarios, the short review spotlights the pressing environmental issues regarding the persistence, transmission, and infectivity of SARS-CoV-2 in different environmental matrices. Aiming to address this issue with further and deeper insight into the SARS-CoV-2 emergence, a list of most concerned questions is given that should be carefully considered and answered in future studies.

Bacterial contamination and antimicrobial susceptibility patterns of intensive care units medical equipment and inanimate surfaces at Ayder Comprehensive Specialized Hospital, Mekelle, Northern Ethiopia.

OBJECTIVE: To determine bacterial contaminants and their antimicrobial susceptibility patterns from medical equipment and inanimate surfaces. RESULTS: Of 130 swabs, 115 (88.5%) swabs were culture positive, of which contaminated medical equipment and inanimate surfaces account 70 (83.3%) and 45 (97.8%), respectively. All the swabs collected from sphygmomanometer, bedside table, computer and computer standing tables were 100% contaminated with bacteria. From the culture-positive swabs, a total of 171 bacterial isolates were identified, out of which 117 (68.4%) and 54 (31.6%) isolates were gram-positive and gram-negative, respectively. Most isolates (82%) were resistant to ampicillin and 13%, 8.6%, and 14% was observed in ciprofloxacin, gentamicin, and tetracycline respectively. Multi-drug resistant was observed in Escherichia coli (72.7%) and Staphylococcus aureus (58.7%).

Methicillin-resistant and vancomycin-intermediate Staphylococcus aureus colonizing patients and intensive care unit environment: virulence profile and genetic variability.

This study aims to determine the prevalence of Staphylococcus aureus colonizing patients and ICU environment of a teaching hospital, the virulence and antimicrobial susceptibility profile of the isolates, and to evaluate the genetic relationship among them. A total of 536 swabs (134 of patients and 402 of ICU environment) were collected and analyzed to detect S. aureus. The antimicrobial susceptibility of the isolates was determined by disk diffusion test, and the detection of the mecA and virulence factors genes was performed by PCR, in addition to SCCmec typing. The genetic similarity of the isolates was determined by PFGE. Staphylococcus aureus was isolated in 12.7% of the swabs. The prevalence of colonization was 13.4% in patients and 12.4% in the environmental samples. The multidrug resistance was determined in 82.4% of the isolates. The prevalence of methicillin-resistant S. aureus was 20.6%, with 50.0% classified as SCCmec IV. The intermediate resistance to vancomycin was detected in 5.9% and 4.4% of the isolates obtained from patients and environment, respectively. Identical isolates obtained from different patients and sources were grouped into several clusters. The results showed dissemination of multidrug-resistant strains between patients and fomites and the persistence of MRSA and VISA isolates in the ICU environment.