Dentists, Their Handicraft Hobbies and City of London Livery Companies.

Many successful dentists also spend much time on hobbies. Unsurprisingly many of them involve the use of their hands, often but not always honing skills learned in dentistry. All the people discussed have another essential skill, the ability to design. The paper demonstrates clearly that striving for professional success leaves room for other activities.

The implications of healthcare professionals wearing jewelry on patient care biosafety: observational insights and experimental approaches.

The use of jewelry among healthcare professionals poses a risk of cross contamination due to potential bacterial accumulation and spread. Through a mixed-method design, this study first analyzed the implications of healthcare professionals wearing jewelry on patient care biosafety as well as on the residual bacterial load of hands and rings after hand hygiene. Firstly, an observational prevalence study to verify whether nursing professionals wear personal accessories during healthcare assistance was carried out. Second, an experimental design involving intentional contamination and hygiene of the hands, with and without a ring, was conducted. The bacterial load of both hands and rings was measured by counting colony forming units. The observational study showed that nursing workers frequently wear jewelry during healthcare assistance. Nonetheless, the experimental study did not indicate differences in bacterial contamination between hands with and without a ring, despite the hand hygiene procedure applied. In conclusion, many nursing workers wear jewelry in the workplace. Although hands with and without a ring exhibited similar microbial load, rings appeared as a potential source of bacterial contamination, reinforcing the need to remove jewelry during working hours. Hand hygiene using alcohol, or soap and water significantly decreased the bacterial load on the participants' hands, with handwashing proving to be the most efficient method for removing intentional contamination.

Jewelry rock discrimination as interpretable data using laser-induced breakdown spectroscopy and a convolutional LSTM deep learning algorithm.

In this study, the deep learning algorithm of Convolutional Neural Network long short-term memory (CNN-LSTM) is used to classify various jewelry rocks such as agate, turquoise, calcites, and azure from various historical periods and styles related to Shahr-e Sokhteh. Here, the CNN-LSTM architecture includes utilizing CNN layers for the extraction of features from input data mixed with LSTMs for supporting sequence forecasting. It should be mentioned that interpretable deep learning-assisted laser induced breakdown spectroscopy helped achieve excellent performance. For the first time, this paper interprets the Convolutional LSTM effectiveness layer by layer in self-adaptively obtaining LIBS features and the quantitative data of major chemical elements in jewelry rocks. Moreover, Lasso method is applied on data as a factor for investigation of interoperability. The results demonstrated that LIBS can be essentially combined with a deep learning algorithm for the classification of different jewelry songs. The proposed methodology yielded high accuracy, confirming the effectiveness and suitability of the approach in the discrimination process.

Examining the Moderating Role of Reasons in Masstige Luxury Buying Behavior.

This study proposes a new model derived from Behavioral Reasoning Theory (BRT) to examine the purchasing behavior of masstige jewelry consumers. The suggested model provides a more comprehensive understanding of the determinants of purchasing masstige products by considering values and reasons in addition to the global motives and intention. The study also examines, for the first time, the moderating role of reasons. It explores how reasons may strengthen or weaken the impact of perceived values on global motives. The proposed model was empirically tested using partial least squares-structural equation modeling (PLS-SEM) with survey data on the consumption of masstige jewelry brands in Türkiye. To provide a more complete understanding of the moderating role of reasons, submodels were constructed for different value-reason combinations. The results demonstrate notable differences in the goodness-of-fit measures between the moderated and non-moderated models. Specifically, reasons contributed to enhanced explanations of global motives and intention, both directly and indirectly. However, not all submodels yielded significant results in terms of the moderator effect. Thus, the empirical tests supported the hypotheses regarding the moderating effect only partially. Overall, the current findings further extend the existing frameworks and provide valuable insights into masstige jewelry purchasing behavior, which can be used by marketers to develop more effective strategies.

Customizable Three-Dimensional Printed Earring Tap for Treating Affections Caused by Aesthetic Perforations.

This work aimed to develop a three-dimensional (3D) wearable drug-loaded earring tap to treat affections caused by aesthetic perforations. The initial phase involved a combination of polymers to prepare filaments for fused deposition modeling (FDM) 3D printing using a centroid mixture design. Optimized filament compositions were used in the second phase to produce 3D printed earring taps containing the anti-inflammatory naringenin. Next, samples were assessed via physicochemical assays followed by in vitro skin permeation studies with porcine ear skin. Two filament compositions were selected for the study's second phase: one to accelerate drug release and another with slow drug dissolution. Both filaments demonstrated chemical compatibility and amorphous behavior. The use of the polymer blend to enhance printability has been confirmed by rheological analysis. The 3D devices facilitated naringenin skin penetration, improving drug recovery from the skin's most superficial layer (3D device A) or inner layers (3D device B). Furthermore, the devices significantly decreased transdermal drug delivery compared to the control containing the free drug. Thus, the resulting systems are promising for producing 3D printed earring taps with topical drug delivery and reinforcing the feasibility of patient-centered drug administration through wearable devices.

The toxicological assessment of hazardous elements (Pb, Cd and Hg) in low-cost jewelry for adults from Chinese E-commerce platforms: In situ analysis by portable X-ray fluorescence measurement.

This article focusses on the environmental implications of low-cost jewelry for adults from Chinese e-commerce platforms ((n = 8) with heavy metal impurities (Pb, Cd and Hg) and their potential impact on human health and the environment. The study highlights the advantages of using portable X-ray fluorescence (pXRF) analysis for rapid, non-destructive, and in situ analysis of heavy metals in jewelry. The results reveal that all products (n = 106) contained heavy metals at varying levels, Hg being the most commonly detected heavy metal. The fact that 71% of the samples exceeded the EU limit for Pb and 51% exceeded the EU limit for Cd is alarming and highlights the need for stricter regulations and monitoring of the jewelry industry to mitigate the risks posed by heavy metals in the environment. The study emphasizes the importance of using pXRF analysis to identify heavy metals in jewelry and address the literature gap in environmental risk assessments of Pb, Cd, and Hg in low-cost jewelry for adults from China. In general, the findings call for urgent action to ensure the safety of consumers and prevent environmental pollution by strengthening regulations and monitoring the jewelry industry.

Perception and Knowledge of Oral and Facial Piercings among Dental Students: Web-based Survey.

AIM: The aim of this web-based questionnaire was to survey dental students to obtain their perception and knowledge of oral and facial piercings. MATERIALS AND METHODS: The participants comprised 240 students enrolled in the dental school who were asked to complete 20 close-ended, yes/no, yes/no/do not know, and multiple responses questions. The questionnaire covers general information concerning oral/facial piercing, triggers why youths and early adults get it, probable complications, their appreciation of the possibility of related health conditions, and their knowledge and perception. The survey was distributed to the students by email. The results were tabulated and statistically analyzed. RESULTS: Dental first year (D1) and dental second year (D2) were substantially more likely to indicate that orofacial piercings as unacceptable and are less expected to have an orofacial piercing compared to D3 and D4 (p < 0.01). About 16.8% of the students reported previous orofacial piercings. There was a definite correlation between previous orofacial piercings and thinking that is appropriate in society (p < 0.05). Males were significantly more likely to have an orofacial piercing (p < 0.01). The Internet was reported as the most common source of information. The most popular cause for piercings is to be unique and different. CONCLUSIONS: Orofacial piercings are relatively frequently used by students in dental school and few students intend on getting one in the future. Knowledge of the hazards of orofacial piercing correlated with the requirement for parental approval. The majority of students think piercings are appropriate in society and know their complications and risks. CLINICAL SIGNIFICANCE: Orofacial piercing has been gaining popularity but its risks/complications may not be known by practitioners. There is a need for research to assist dental/medical practitioners in advising, educating, and safeguarding patients by evaluating of the perception and knowledge of students about orofacial piercings.

Metals as toxicants in event-based expedited production of children's jewelry.

Globally, the hazardous substance in children's goods is of great concern. Toxic chemicals are potentially harmful to the health and growth of infants and children. Lead (Pb) and cadmium (Cd)-contaminated children's jewelry is widely encountered in many countries. This study aims to determine the concentration of metal toxicants (Pb, Cd, Ni, Cu, Zn, Co, and Fe) in event-based (Independence Day festival) children's jewelry, considering time-limited and fast production products that may compromise the quality and safety parameters during manufacturing. The determinations are for the time-constraint industrial production of children's jewelry in the context of the toxic substances in a variety of base materials used. This is the first time event-based children's jewelry has been monitored and critically assessed for metal contamination. Forty-two samples, including metallic, wooden, textile, rubber, plastic, and paint-coated plastic children's jewelry, were tested. Seventy-four percent of samples detected Pb and Cd in quantifiable amounts. Ni in 71%, Cu in 67%, Co in 43%, and Zn and Fe were detected in 100% samples with quantifiable amounts. Twenty-two ID-CJ samples exceeded the US regulatory limit for Pb and four samples for Cd. However, twenty-nine samples for Pb, eleven for Cd, five for Co, and one for Cu exceeded the EU regulatory limit. The highest concentration of Pb was found in paint-coated plastic jewelry, and the highest Cd was found in metallic jewelry. These results suggest that the potential hazards of event-based children's jewelry deserve the attention of government agencies seeking to limit children's exposure to toxic chemicals. Intergovernmental organizations and individual countries regulate chemicals in consumer products, but a coordinated international approach is lacking. Some continents and countries still lack in regulations for children's products, especially jewelry, and toys.

Staphylococcal biofilm on wedding rings worn by laboratory workers.

Hands of healthcare workers play essential role in the spreading of antimicrobial-resistant microorganisms in and out of the healthcare settings. Less is known about the role of laboratory workers (LWs). The aim of our study was to evaluate the presence of biofilm-forming staphylococci on the surface of jewelry rings of LWs and their antimicrobial susceptibility pattern.A total of 79 LWs from eight different microbiology laboratories that process and analyze specimens from the tertiary care hospitals in Belgrade, Serbia participated in the study. The study was reviewed and approved by the institutional review boards at hospitals. Samples were taken after hand washing. Bacteria on LWs wedding rings were detected with the rolling method, and further analyzed in order to determine the number of colony forming unit (CFU) per ring, species of bacteria and their antimicrobial susceptibility pattern, methicillin resistance and biofilm-producing capacity in vitro.Staphylococci were recovered from 60.8% of wedding rings. All strains produced biofilm (25% weak, 56.2% moderate and 18.8% large amount), with significant difference between species (P < 0.001). Staphylococcus aureus and Staphylococcus epidermidis formed the largest amount of biofilm and had the largest number of CFU per ring. Staphylococci were most commonly resistant to penicillin (66.7%), tetracycline (50.0%), and erythromycin (45.8%); 41.7% of isolates was multidrug resistant and mecA gene was detected in five strains. All strains were susceptible to linezolid, vancomycin, teicoplanin and tigecycline.Staphylococci colonize LWs wedding rings, form biofilm on it, have multidrug resistant phenotype and/or carry mecA gene, representing a significant reservoir for the spreading of microorganisms and resistance. As far as we know, our study is the first that address this topic in laboratory workers.

Tooth adornment among siblings living in an urban slum in Nigeria: Health implications for a vulnerable population.

Tooth jewelry boosts the appearance and confidence of wearers. However, its use may carry adverse health consequences. This paper creates awareness about a practice not previously reported in Nigeria, to prevent negative health consequences while appropriate measures are taken to quantify and describe the determinants and plan appropriate interventions.

Environmental assessment in fine jewelry in the U.S.-Mexico's Paso del Norte region: A qualitative study via X-ray fluorescence spectroscopy.

Heavy metal contamination in raw materials has spread widely in the United States. The high increased number of recalls in consumer products and the lack of stricter regulations in the raw materials to be used in the jewelry industry have raised concerns among consumers. Studies in low-cost jewelry have shown the presence and high content of heavy metals; this environmental problem led to a child's death after swallowing a charm containing elevated levels of lead (Pb). Exposure to heavy metals, through inhalation, mouth, and skin contact, causes adverse health effects in children and adults. Exposure to lead affects mainly the nervous system and brain development; exposure to cadmium (Cd) causes damage to liver, kidneys, and lungs, and potentially leads to cancer; exposure to nickel (Ni) causes severe dermatitis. Thus, the importance and impact of studies of this nature cannot be overstated. As heavy metal contamination has increased in the United States, this research fills an important knowledge gap between previous studies conducted on low-cost jewelry and fine jewelry. In this study, conducted in the Paso del Norte region, one hundred and forty-three pieces of fine jewelry were evaluated for the presence of heavy metals using X-ray fluorescence (XRF) spectroscopy. Our study showed that 61 samples (42.7 %) exhibited the presence of Ni in the metal alloy, prevailing in jewelry pieces with lower percentage of gold. Eighteen samples showed the presence of Pb in gemstones, 11 pieces of these samples (7.7 % total) had <33.3 % gold (≤10 K); however, none of the samples showed the presence of Pb in the metal alloy. Further research is needed to evaluate the bioaccessibility of Pb in these gemstones, which may pose a potential health hazard to children and adults in the US Paso del Norte region and throughout the world.

An investigation into the present levels of contamination in children's toys and jewelry in different countries: a systematic review.

Contamination by heavy metals and toxic elements in children's toys and jewelry is an ongoing challenge in different countries. These contaminants can enter the children's body via oral, dermal, and respiratory routes, leading to adverse health effects. This study aimed to investigate the present levels of contamination in children's toys and jewelry in 15 countries, including UK, Saudi Arabia, Cambodia, China, Kosovo, Nigeria, North American, Kazakhstan, UAE, Pakistan, Iraq, Israel, West Bank/Palestine, Czech Republic, and Turkey. In this review, the legislation and recommendation of the United States (U.S.), the Bureau of Indian Standards (BIS), Turkish Standards Institute (TSE), Canada, and the European Union (E.U.) on toxic elements in toys and jewelry are introduced. Plastic or metallic toys and children's jewelry still have the most severe toxic elements pollution and the existence of lead (Pb), nickel (Ni), cadmium (Cd), arsenic (As), mercury (Hg), chromium (Cr), copper (Cu), selenium (Se), barium (Ba), Zinc (Zn), cobalt (Co), manganese (Mn), bisphenol A, phthalates, parabens, azo dyes, and flame retardants has been regarded as an ongoing challenge in these articles. Finally, this review offers benchmarking of the concentrations of toxic elements in all types of children's toys and jewelry in different nations.

U(rano)topia: spectral skies and rainbow holograms for silica aerogel artworks.

Micro/nano structuring in distinct chemical compositions has demonstrated added values which could be utilized in various modern applications and products through the lens of visual arts. Silica aerogel is a prominent example of such a nanostructure, with which we recently utilized to accommodate the unique design of high jewelry. Using its natural shades and transparent layers, silica aerogel can be described by the first author, a visual artist, as an extremely beautiful and ethereal material that closely resembles a piece of sky. Ultimately silica aerogel can be exploited as a sky-like material, and has been used in numerous collaborations amongst artists and scientists to bring to life concepts, like rainbow holograms on silica aerogel dried by high-temperature supercritical drying with methanol. In this short review, we show how such collaborations the authors have been proceeding are evoking developments in science and technology as well as in design, fashion and art industries. The series of the collaborative research has been contributing to the development of quality end products by merging new technologies, novel functional materials and innovative manufacturing processes with visual arts.

The influence of androgynous streamers on consumers' product preferences.

Since the rapid development of network technology, the rise of live-streaming shopping platforms has followed. Some streamers influence consumers' preferences for products through their gender role attributes, thus generating great commercial value. Based on attachment theory and using an experimental approach, this study explored the impact of streamers' gender roles (single gender/androgyny) on consumers' preferences through 2 studies. Study 1 shows the androgynous streamer elicits a higher product preference than the single-gender (masculine and feminine) streamer. Study 2 demonstrates the moderating effect of gender stereotypes through 2 experiments to construct clear boundary conditions for the main effect and the results show that regardless of whether the streamer is male or female when individuals have a high gender stereotype, the single-gender streamer leads to a higher product preference than the androgynous streamer. When individuals have a low gender stereotype, the androgynous streamer promotes a higher product preference than the single-gender streamer.

Surface Protection of Quaternary Gold Alloys by Thiol Self-Assembled Monolayers.

This work deals with a physical and chemical surface characterization of quaternary 18K, 14K, and 9K gold alloys and pure polycrystalline gold substrates. Surface microstructure and composition are evaluated by scanning electron microscopy (SEM), X-ray photoelectron spectroscopy (XPS), and X-ray fluorescence spectroscopy. Corrosion resistance of 18K gold alloys is explored by potentiodynamic polarization showing the influence of the manufacturing process on materials fabricated as plates and wires. The research is also in the framework of one of the most common strategies on the modification of metallic surface properties, i.e., the building of self-assembled monolayers (SAM) from organic thiols. The metal affinity of the head group to produce the coating of the substrate by covalent binding is approached by using thiol compounds with different molecular structures and functional group chemistries exposed to an electrolyte solution. Therefore, a comparative study on the surface protection of a quaternary 18K gold alloy and pure gold substrates by SAMs of 6-mercaptopurine (6MP), 1-decanethiol (DT), and 11-mercaptoundecanoic acid (MUA) has been carried out. Surface modification and SAM organization are followed by cyclic voltammetry (CV), and the behavior of the double layer of the electrode-electrolyte interface is evaluated by electrochemical impedance spectroscopy (EIS). The study of these materials allows us to extract fundamental knowledge for its potential application in improving the bioactive properties of different jewelry pieces based on 18K gold alloys.

The Effects of the Activity of Making Jewelry From Beads on the Anxiety Levels of Children With Cancer: A Randomised Controlled Study.

Background: Children hospitalized for cancer treatment are known to experience high levels of anxiety. This study aimed to examine the effects of making jewelry from beads on the state and trait anxiety levels of children with cancer. Methods: This parallel group, randomized controlled trial was conducted on 62 children aged 7-18 who were being treated for cancer. The children were selected using the random sampling method. The jewelry-making sessions with the children in the intervention group were held twice a week for four weeks. Data were analysed using the chi-square test, the Student's t-test, the independent samples t-test and linear regression. Results: The state anxiety levels of the children in the intervention group decreased both in the first week and the fourth week after making jewelry. The difference in the average post-test scores between the two groups was found to be significant (p < .05). The fourth week average trait anxiety score of the children in the intervention group decreased (M = 33.2) in comparison to the average score of the control group (M = 36.5). The difference between the two groups was found to be significant (p < .001). Discussion: This study found that the activity of making jewelry from beads was effective in reducing the state and trait anxiety levels of children with cancer.

A unique case of direct lightning strike.

This is a report of death due to direct lightning strike that was witnessed, with description of the injuries. The associated clothing and jewelry were examined microscopically for lightning-related findings. For the first time, we report a lightning strike on a victim that led to crater formations in the brass clasp of the basil wood bead necklace, brass teeth, and brass button of the zipper. Blackening, fissuring, and charring of basil wood beads were noted. There was blackening and fusion of cowrie shell teeth, which were in the black thread necklace. The silver necklace chain vaporized and caused deep burns on the nape of neck. A few links of the silver chain necklace were found embedded in the clothing. All this damage provides important insight into the behavior of lightning.

I'm All Ears: A Population-Based Analysis of Consumer Product Foreign Bodies of the Ear.

OBJECTIVES: The purpose of this study was to assess the nationwide incidence of ear foreign body (FB) presentations to the emergency department (ED) and analyze the most common FB consumer products encountered. METHODS: The National Electronic Injury Surveillance System (NEISS) was evaluated for ED visits that included "ear foreign bodies" from 2010 through 2019. The most frequent foreign bodies were identified and organized by demographics. RESULTS: A total of 20,545 ear FB cases were found, with an estimated 608,860 ED visits nationwide. Female patients (56%) were more likely to have jewelry and first aid equipment FBs. Males between the ages of 5 and 15 years were significantly (P < 0.05) more likely to have paper products, pens/pencils, and desk supplies in their ears. CONCLUSION: Ear FBs represent a substantial proportion of healthcare expenditures. Although children are the most commonly affected individuals, all ages require further education and preventive measures.

An ICP-MS Study for Quantitation of Nickel and Other Inorganic Elements in Urine Samples: Correlation of Patch Test Results with Lifestyle Habits.

Nickel (Ni) is a frequently used metal in the production of many products, and Ni exposure occurs in humans through food, inhalation, and skin. Studies reported Ni as the most common allergen diagnosed in the serial patch test. The main purpose of our study was to determine the concentration of Ni and other elements in the urine samples of individuals with Ni-sensitivity and to determine the effect of lifestyle habits on these variables. This study was conducted with 388 participants; additionally, both Ni patch test and inorganic analysis (for 24 elements) method in urine with inductively coupled plasma-mass spectrometry (ICP-MS) were applied to all participants. Ninety-two (23.7%) of the participants were found to have nickel sensitivity with a mean urine concentration of 4.475 µg/g creatinine (median=4.260; SD=2.527). The urine nickel concentration was significantly different between female and male participants (p =0.001). We found a significant correlation between Ni and other metals alongside various element pairs. The mean urine Ni concentration of the individuals with a positive Ni sensitivity test result was not different from that of the participants without Ni sensitivity (4.475 vs 4.256 µg/g creatinine, respectively; p = 0.068). The high accuracy, recovery, and repeatability data obtained from the analyses indicate that this study is efficient and appropriate for the quantitative determination of nickel and other elements in urine samples. Ni-containing objects and Ni-rich foods should be of concern for individuals with hypersensitivity reactions to the element.

Lead in children's jewelry: the impact of regulation.

BACKGROUND: In 2016 we identified a regulatory gap in Israel reflecting a lack of restrictions on lead in children's jewelry. We conducted surveys that found high levels of lead in children's jewelry. Following the findings, a new standard restricting lead content was introduced in 2018. OBJECTIVE: The goal of this study is to assess whether the new standard had an impact on lead concentrations in children's jewelry on the market 4 months after entry into force, and to examine factors that influenced the standard's effectiveness. METHODS: Thirty-five items of children's jewelry were sampled from stores in Israel in 2018. Lead content of 130 subsamples of these items was tested with X-ray Fluorescence Spectrometry (XRF). We compared these findings to those before the introduction of the standard. We also conducted five structured interviews with professionals from government ministries, industry and expert bodies to examine factors influencing the standard's enactment and implementation. RESULTS: 17% of jewelry samples exceeded the ASTM lead standard in 2018 compared with 50% in 2016. The mean of the jewelry subsamples analyzed in 2018 was 936 (±1700) compared to 1420 (±5740) ppm in 2016. Scientific and regulatory consensus among those setting the new standard led to its swift enactment. However, enforcement challenges may reduce the standard's impact. SIGNIFICANCE: A new standard on lead in children's jewelry was followed by a decline in lead concentrations, but some products with lead exceedances remained available on the market. Public health campaigns, standards and compliance monitoring, and higher penalties will all help to reach the goal of protecting public health.