Flexural Behaviour and Internal Forces Redistribution in LWAC Double-Span Beams.

This research study aimed to investigate the effect of the lightweight aggregate concrete and steel reinforcement interaction on the behaviour of continuous beams compared to the normal concrete of the same strength. This paper presents six full-scale, double-span beams with a rectangular cross-section made of both lightweight and normal concrete. The study confirmed that beams made of lightweight aggregate concrete achieve comparable flexural capacities to those made of NWC but their deformability and ductility are lower. Although the redistribution of internal forces depends mainly on the longitudinal reinforcement ratio, the influence of ultimate compressive strains of concrete is also noticeable. The ultimate compressive strains in LWAC are generally lower than in NWC. The lower rotational capacity of LWAC results in smaller degrees of moment redistribution in beams made of this concrete compared to normal concrete beams.

Proposing a New Method Based on Image Analysis to Estimate the Segregation Index of Lightweight Aggregate Concretes.

This work presents five different methods for quantifying the segregation phenomenon in lightweight aggregate concretes (LWAC). The use of LWACs allows greater design flexibility and substantial cost savings, and has a positive impact on the energy consumption of a building. However, these materials are susceptible to aggregate segregation, which causes an irregular distribution of the lightweight aggregates in the mixture and may affect the concrete properties. To quantify this critical process, a new method based on image analysis is proposed and its results are compared to the well-established methods of density and ultrasonic pulse velocity measurement. The results show that the ultrasonic test method presents a lower accuracy than the other studied methods, although it is a nondestructive test, easy to perform, and does not need material characterization. The new methodology via image analysis has a strong correlation with the other methods, it considers information from the complete section of the samples, and it does not need the horizontal cut of the specimens or material characterization.