Flake tools in the European Lower Paleolithic: A case study from MIS 9 Britain.

Studies of flake tools in the British Lower Paleolithic are rare owing to lower quantities of flake tools than handaxes and the perception that flake tool technology became more important in the succeeding Middle Paleolithic. In Britain, and Europe more broadly, MIS 9 (328-301 ka) has been characterized as a period of technological transition owing to the presence of early prepared core technology and the status of the period as the final interglacial prior to the onset of the Middle Paleolithic. It has been argued that the period demonstrates an increase in both the numbers and importance of flake tools, possibly showing emerging Middle Paleolithic behaviors. This study presents the results of a technological examination of flake tools in Britain during MIS 9, focusing on 25 sites, including 15 assemblages previously recorded as having higher quantities of flake tools. We use these assemblages to assess whether the flake tools of MIS 9 represent a transition toward the technology of the Middle Paleolithic. We consider factors including collection history, site formation, function, reduction, and cultural groups. We argue that in Britain the archaeological record of MIS 9 does not show an increase in the use of flake tools and demonstrates more continuity than change in relation to earlier periods of the Lower Paleolithic. There is a technological background of ad hoc retouch of simple flake tools with occasional evidence of more invasively retouched scrapers. Furthermore, aside from the introduction of Levallois technology, flake tools change little in the Early Middle Paleolithic. These results are contextualized within the broader evidence from Europe and comparisons to the longer sequences at key sites. We conclude that the major changes in technology began between MIS 13 and MIS 11 and these merely became cemented during MIS 9 and the following Middle Paleolithic.

Muscle recruitment and stone tool use ergonomics across three million years of Palaeolithic technological transitions.

Ergonomic relationships that minimize muscle activity relative to the creation of cutting stress underpin the design of modern knives, saws, and axes. The Palaeolithic archaeological record, and the > 3 million years of technological behavior that it represents, is predominantly characterized by sharp stone implements used for cutting. To date, we do not know whether Palaeolithic hominins adhered to ergonomic principles when designing stone tools, if lithic technological transitions were linked to ease-of-use advances, or even how muscularly demanding different Palaeolithic tools are on an empirically defined relative basis. Here, we report the results of an experimental program that examines how four key stone tool types, produced between ∼ 3.3 million and ∼ 40 thousand years ago, influence muscle activation in the hominin upper limb. Using standardized laboratory-based tests designed to imitate Pleistocene cutting behaviors, surface electromyography recorded electrical activity (amplitude) in nine muscles across the hand, forearm and shoulder of modern humans during the use of replica Lomekwian, Oldowan, Acheulean and Mousterian stone tools. Results confirm digit flexors and abductors, particularly the first dorsal interosseous and flexor pollicis longus, to be the most heavily recruited muscles during the use of all tool types. Significant differences in muscle activation are, however, identified dependent on the type of stone tool used. Notably, the abductor digiti minimi, flexor pollicis longus, and biceps brachii were highly activated during handaxe use, particularly when compared to the use of Oldowan and Levallois flakes. Results are discussed in light of current understanding on the origin of Lower and Middle Palaeolithic technologies, why specific tool types were produced over others during these periods, and the extent to which early hominins produced ergonomically designed tools.

Early Levallois core technology between Marine Isotope Stage 12 and 9 in Western Europe.

Early Levallois core technology is usually dated in Europe to the end of Marine Isotope Stage (MIS) 9 and particularly from the beginning of MIS 8 to MIS 6. This technology is considered as one of the markers of the transition from lower to Middle Paleolithic or from Mode 2 to Mode 3. Recent discoveries show that some lithic innovations actually appeared earlier in western Europe, from MIS 12 to MIS 9, contemporaneous with changes in subsistence strategies and the first appearance of early Neanderthal anatomical features. Among these discoveries, there is the iconic Levallois core technology. A selection of well-dated assemblages in the United Kingdom, France, and Italy dated from MIS 12 to 9, which include both cores and flakes with Levallois features, has been described and compared with the aim of characterizing this technology. The conclusion supports the interpretation that several technical features may be attributed to a Levallois technology similar to those observed in younger Middle Paleolithic sites, distinct from the main associated core technologies in each level. Some features in the sample of sites suggest a gradual transformation of existing core technologies. The small evidence of Levallois could indicate occasional local innovations from different technological backgrounds and would explain the diversity of Levallois methods that is observed from MIS 12. The technological roots of Levallois technology in the Middle Pleistocene would suggest a multiregional origin and diffusion in Europe and early evidence of regionalization of local traditions through Europe from MIS 12 to 9. The relationships of Levallois technology with new needs and behaviors are discussed, such as flake preference, functional reasons related to hunting and hafting, an increase in the use of mental templates in European populations, and changes in the structure of hominin groups adapting to climatic and environmental changes.

Acheulo-Yabrudian and Early Middle Paleolithic at Hayonim Cave (Western Galilee, Israel): Continuity or break?

The long archeological sequence exposed during our renewed excavations in Hayonim Cave sheds new light on the striking technological changes observed at the boundary between the Acheulo-Yabrudian (end of the Lower Paleolithic) and Early Middle Paleolithic in the Levant, as well as on their meaning in terms of population movements. The recent, as yet unpublished, technological studies highlight a clear technological break between these two entities. In Hayonim, the Acheulo-Yabrudian assemblages found at the bottom of the archeological sequence display the specific combination of bifacial shaping and the production of thick, often cortical, flakes frequently shaped into scrapers by Quina retouch. Neither of these lithic production systems is observed in the succeeding Levantine Middle Paleolithic assemblages. In contrast, the Early Middle Paleolithic is characterized by the expansion and diversification of the Levallois production system in its full-fledged form, the emergence of a specific Laminar technology, and a high proportion of retouched tools made on elongated blanks (points and blades). These technological features are unknown in the previous Acheulo-Yabrudian assemblages in the cave. Based on this information, we attempt to determine if the observed changes in stone tool production strategies resulted from an autochthonous development or a dispersal out of Africa.

The Victoria West: earliest prepared core technology in the Acheulean at Canteen Kopje and implications for the cognitive evolution of early hominids.

Prepared core technology illustrates in-depth planning and the presence of a mental template during the core reduction process. This technology is, therefore, a significant indicator in studying the evolution of abstract thought and the cognitive abilities of hominids. Here, we report on Victoria West cores excavated from the Canteen Kopje site in central South Africa, with a preliminary age estimate of approximately 1 Ma (million years ago) for these cores. Technological analysis shows that the Victoria West cores bear similarities to the 'Volumetric Concept' as defined for the Levallois, a popular and widely distributed prepared core technology from at least 200 ka (thousand years ago). Although these similarities are present, several notable differences also occur that make the Victoria West a unique and distinctive prepared core technology; these are: elongated and convergent core shapes, consistent blow directions for flake removal, a predominance of large side-struck flakes, and the use of these flakes to make Acheulean large cutting tools. This innovative core reduction strategy at Canteen Kopje extends the roots of prepared core technology to the latter part of the Early Acheulean and clearly demonstrates an increase in the cognitive abilities and complexities of hominids in this time period.

The pattern of emergence of a Middle Stone Age tradition at Gademotta and Kulkuletti (Ethiopia) through convergent tool and point technologies.

The Gademotta and Kulkuletti site complex, located in the central part of the Main Ethiopian Rift, is known to be one of the richest early Middle Stone Age (MSA) sequences in East Africa. The technological assessment of three main sites provides evidence of major changes in the production of convergent tools over a period from before 280 ka (thousands of years ago) to ca. 100 ka. Important diachronic changes are identified in the manufacturing process of convergent tools, by shaping or retouching of predetermined points, and in the core reduction process that produced the corresponding blanks. These are: 1) the development of specific Levallois methods for the production of points (classical Levallois point production and Nubian type 1 core reduction); and 2) the shift from uni-bifacial invasive shaping of convergent tools to localized slight retouch of predetermined points. These technological changes in convergent tool production reveal the gradual emergence of a new set of technological behaviors that can be considered specific to the MSA. While the eastern African MSA is often considered as stable over time with minimal innovation, our results provide an insight into local behavioral mechanisms that have given rise to changes in technological systems during the early MSA.

Generativity, hierarchical action and recursion in the technology of the Acheulean to Middle Palaeolithic transition: a perspective from Patpara, the Son Valley, India.

The Acheulean to Middle Palaeolithic transition is one of the most important technological changes that occurs over the course of human evolution. Here we examine stone artefact assemblages from Patpara and two other excavated sites in the Middle Son Valley, India, which show a mosaic of attributes associated with Acheulean and Middle Palaeolithic industries. The bifaces from these sites are very refined and generally small, but also highly variable in size. A strong relationship between flake scar density and biface size indicates extensive differential resharpening. There are relatively low proportions of bifaces at these sites, with more emphasis on small flake tools struck from recurrent Levallois cores. The eventual demise of large bifaces may be attributed to the curation of small prepared cores from which sharper, or more task-specific flakes were struck. Levallois technology appears to have arisen out of adapting aspects of handaxe knapping, including shaping of surfaces, the utilization of two inter-dependent surfaces, and the striking of invasive thinning flakes. The generativity, hierarchical organization of action, and recursion evident in recurrent Levallois technology may be attributed to improvements in working memory.