Determination of elements in cereals, pseudocereals, and legumes by microwave plasma-atomic emission spectrometry.

A novel method for multi-element analysis in cereals, pseudocereals, and legumes was developed for principal (calcium, magnesium, potassium, and phosphorus) and trace (manganese, zinc, iron, copper, and aluminum) element determination using a microwave plasma-atomic emission spectrometer (MP-AES). The method was validated using certified reference analyte values from durum wheat (DUWF-1), corn bran (BRAN-1), quinoa (KINO-1), rice (SRM 1568b), and soy (SRM 3234). Spike recoveries were assessed using field-grown crops that represent staple and minor crops with variable matrix compositions. A closed-vessel microwave-assisted digestion method consisting of 12 mL of deionized water, 2 mL of HNO3, and 2 mL of H2O2 was efficient for the mineralization of all crops. Acceptable measurement agreement was achieved between certified and determined values for all reference materials with recovery ranges from 89 to 120 percent. Plant breeders can use the method to develop and screen crops for improved nutrient density.

Synergistic role of Mycobacterium indicus pranii and human beta Defensin-2 as adjunctive therapy against Mycobacterium tuberculosis.

Host-directed therapies (HDT) via modulation of specific host responses like inflammation can limit mycobacterial infection. HDTs could be included in current TB therapy as an adjunct to increase bacterial clearance and limit tissue damage to control spread. Individually, Mycobacterium indicus pranii (MIP) and human beta defensin-2 (hBD-2) are promising therapies for tuberculosis (TB). They can directly target the TB bacilli and enhance cell-mediated immune responses, which is limiting with conventional drugs. Therefore, our study investigated the combined application of MIP and hBD-2 to evaluate their efficacy in clearing infections caused by Mycobacterium smegmatis (M.smeg) and Mycobacterium tuberculosis (M.tb) (both avirulent; H37Ra and virulent strain; H37Rv) in THP-1 cells and human monocyte-derived macrophages (MDMs). A strong pro-inflammatory response was observed against the combination of MIP and hBD-2 which also correlated with a significant reduction in the bacterial load. This combination further showed protection against M.tb by enhancing pyroptosis in the infected cells. The study suggests the combined use of these potent immunomodulators, which could be employed as an effective mode of therapy as adjuvants against mycobacterial infections after validation in a suitable animal model.

Histopathologic pattern and molecular risk stratification are associated with prognosis in patients with stage IB lung adenocarcinoma.

Background: The benefit of adjuvant therapy remains controversial in completely resected (R0) stage IB non-small cell lung cancer (NCLSC) patients. In this study, we aimed to explore potential prognostic factors in stage IB NSCLC patients. Methods: This study included 215 patients with R0 stage IB lung adenocarcinoma (LUAD) (tumor size: 3-4 cm). DNA sequencing was performed with surgical samples of 126 patients using a panel of 9 driver genes. The molecular risk stratification was assessed by a 14-gene quantitative polymerase chain reaction assay. Results: Among the 215 patients, 67.9% had micropapillary/solid (MIP/SOL)-predominant tumors. Epidermal growth factor receptor (EGFR) mutations were detected in 75 of 126 patients (59.5%). MIP/SOL tumors harbored less common EGFR mutations than the other histologic patterns (50.6% vs. 79.5%, P=0.003). Molecular risk stratification was successfully assessed in 99 patients, of whom 37.4%, 26.3%, and 36.4% were high, intermediate, and low risk, respectively. The MIP/SOL pattern was associated with shorter disease-free survival (DFS) [hazard ratio (HR) =2.16, 95% confidence interval: 1.28-3.67; P=0.01]. The molecular high-risk patients had shorter DFS than the low- (HR =2.93, P=0.01) and intermediate-risk patients (HR =2.35, P=0.06). The prognostic value of molecular risk stratification was also significant in the MIP/SOL subset (median DFS high-risk: 45 months, low and intermediate risk: not reached; P=0.03). Conclusions: Our study showed that both the MIP/SOL pattern and molecular high-risk category were adverse prognostic factors in stage IB NSCLC patients. Our results suggest that combining histologic classification and molecular risk stratification may help to identify the subset of patients with poor prognosis.

A Mendelian randomization study on the association between systemic inflammatory regulators and essential and secondary hypertension.

Background: Inflammation is an important driver of hypertension with numerous components, and there is a paucity of research on the specific inflammatory factors that induce hypertension; therefore, we wanted to investigate the relationship between specific inflammatory factors and hypertension. Purpose: A two-sample Mendelian randomization (MR) study was conducted to assess the causal relationship between systemic inflammatory regulators and hypertension (primary or secondary types). Method: a large-scale, published genome-wide association study (GWAS) meta-analysis encompassing 41 cytokines (involved 8,293 Finnish participants from three independent population cohorts: the Cardiovascular Risk in Young Finns Study (YFS), FINRISK1997, and FINRISK2002.)were utilized, a variety of analyses including MR-Egger, weighted median, simple mode and weighted mode were used as sensitive analyses, to corroborate the causal relationship between inflammatory regulators and hypertension. Additionally, we used MR-Egger intercept test and Mendelian Randomization Pleiotropy RE Sidual Sum and Outlier (MR-PRESSO global test) to further evaluate the presence of horizontal pleiotropy. Results: 3 inflammatory regulators were found related to secondary hypertension, TNFb was negatively associated with risk of secondary hypertension, with a OR of one SD increase in genetically predicted TNFb causing 16.6% (95% CI: 4.4%-27.1%) lower risk of secondary hypertension. Similar trend was also found in MIP1b (OR = 0.91; 95% CI 0.84-0.99, p = 0.024) and MIG (OR = 0.88; 95% CI 0.78-0.99, p = 0.040). Additionally, there was not any evidence of 41 inflammatory regulators associated with primary hypertension. Conclusion: This study supports a negative correlation between TNFb, MIP1b, MIG and secondary hypertension.

Causal links between blood inflammation markers and postherpetic neuralgia risk: insights from a two-sample Mendelian randomization study.

Introduction: Previous studies have suggested an association between blood inflammation-related factors and postherpetic neuralgia. However, the causal relationship between blood inflammation-related factors and postherpetic neuralgia remains unclear. Methods: We employed a bidirectional Two-sample Mendelian randomization (MR) analysis to explore the causal relationship between blood inflammation-related factors and postherpetic neuralgia. The instrumental variables were obtained from a large Genome-wide association study (GWAS) meta-analysis dataset of European descent. The instrumental variables of the blood inflammation-related factors come from the database numbers GCST004420 to GCST004460 and GCST90029070. Postherpetic neuralgia has 195,191 samples with a total of 16,380,406 single nucleotide polymorphisms (SNPs). MR analyses were performed using inverse-variance weighted, MR-Egger, and weighted median methods. Results: The MR results revealed a significant causal effect of Macrophage Inflammatory Protein 1 Beta (MIP1ß) on reducing the risk of postherpetic neuralgia (95%CI = 0.492-0.991, p = 0.044). Additionally, higher levels of interleukin (IL)-10 (95%CI = 0.973-0.998, p = 0.019) and IL-12p70 (95%CI = 0.973-0.997, p = 0.013) were associated with a lower risk of postherpetic neuralgia. Other inflammatory markers showed no significant causal relationship with this condition. Conclusion: This study identifies MIP1ß, IL-10, and IL-12p70 as potential therapeutic targets for preventing or treating postherpetic neuralgia, underscoring the need for further research in this area.

Microwave-assisted supramolecular double crosslinked chitosan-based molecularly imprinted polymer for synergistic recognition and selective recovery of Cd(II) and As(V) from water: Performance and mechanistic insights.

A novel model of the sustainable double crosslinked molecularly imprinted polymer (D-Crosslinked MIP) represented as a supramolecular imprinted polymer was synthesized via the bulk polymerization method. The primary crosslinking was fabricated using biomacromolecule chitosan as a functional monomer and glutaraldehyde as a crosslinker. The primary crosslinked was subjected to dynamic interactions in a secondary crosslinking by binding Al2O3-NPs and TiO2-NPs, forming the supramolecular D-Crosslinked-MIP. The dually crosslinked formed from combining three distinct crosslinkers in one system for the interaction with As(V) and Cd(II). A microwave was employed to evaluate the performance of the designed material in selectivity and extraction of metal ions from water. The FT-IR, XRD, TG/DTA, SEM-EDX, TEM, and XPS were used to verify the characteristics of (D-nano-Al2O3@Crosslinked Chitosan@D-nano-TiO2). The type of solvents, selectivity, interferences, microwave-contact time, pH, temperatures, concentrations, and regeneration were investigated. By using the D-Crosslinked-MIP, at 15 s, Cd(II) revealed a recovery capacity of 99.03 %, Qmax 862.07 mg/g, while As(V) demonstrated a recovery capacity of 99.06 %, Qmax 850.75 mg/g. The D-Crosslinked-MIP exhibited BETs of 69.01 m2/g with a pore volume of 0.2340 cm3/g owing to polymeric crosslinking by metal oxide NPs. The kinetics, isotherm models, and mechanisms of dually crosslinking and extraction of toxic metals were discussed.

Association of Serum Biomarkers With Neurocognitive Decline After PCI in Small Cell Lung Cancer: An Exploratory Study of the Phase III NCT01780675 Trial.

INTRODUCTION: Blood samples were collected to explore potential serum biomarkers associated with neurocognitive function in small-cell lung cancer (SCLC) patients who received prophylactic cranial irradiation (PCI). METHODS: This pre-specified study included patients with blood samples available, who participated in a phase III trial (NCT01780675). Blood samples were collected before PCI and 3-days post-initiating PCI. Neurocognitive decline was defined as a decrease of ≥ 5 points on total recall in the Hopkins Verbal Learning Test-Revised (HVLT-R) assessed from pre-PCI to 4-months post-PCI. Biomarkers were screened using univariate logistic regression analysis. P < .1 was considered statistically significant. RESULTS: Forty-eight enrolled patients who had blood samples at baseline were included and 27 were available for analysis as the other 21 did not assess neurocognitive function at 4-months. Lower levels of Tie-2 (OR = 0.999, 90% CI 0.998-1.000, P = .062), and higher levels of MIP-1b (OR = 1.022, 90% CI 1.000-1.044, P = .093), CCL-17 (OR = 1.004, 90% CI 1.001-1.006, P = .029), and IL-1α (OR = 1.597, 90% CI 1.077-2.367, P = .05) before PCI were correlated with neurocognitive decline at 4-months. Decrease of VEGF-C (OR = 0.972, 90% CI 0.949-0.996, P = .055), CCL-17 (OR = 0.993, 90% CI 0.988-0.999, P = .036), IL-1α (OR = 0.788, 90% CI 0.635-0.979, P = .071), and VEGF (OR = 0.981, 90% CI 0.965-0.997, P = .051) 3-days post-initiating PCI were also associated with neurocognitive decline at 4-months. CONCLUSIONS: Biomarker levels before PCI and changes in their levels 3-days post-initiating PCI may be linked to subsequent neurocognitive decline at 4-months. If validated, these biomarkers could be used to predict the risk of neurocognitive decline and act as a decision aid for personalized PCI in SCLC.

Electrochemical detection of folic acid in food extracts using molecularly imprinted polyacrylonitrile imbued graphite electrode.

The present study elucidates the effectiveness of a molecularly imprinted polyacrylonitrile-imbued graphite-base electrode (MAN@G) for the selective detection of folic acid (FA) in food samples. The prime objective of the recognition and quantification of vitamin compounds like FA is the overall quality assessment of vegetables and fruits. The cost-effective, reproducible, and durable MAN@G electrode has been fabricated using acrylonitrile (AN) as the monomer and FA as the template over graphite-base. The characterization of the synthesized MAN@G electrode material has been accomplished by utilizing UV-visible (UV-vis) spectroscopy and scanning electron microscopy (SEM). A tri-electrode system based on differential pulse voltammetry (DPV) and cyclic voltammetry (CV) techniques was employed to explore the analytical performance of the synthesized electrode. Rigorous analyses divulged that a widespread linearity window could be exhibited by the electrode under an optimized experimental environment, ranging from 20 µM to 400 µM concentrations with an acceptable lower limit of detection (LOD) and limit of quantification (LOQ) of 18 nM, and 60 nM respectively. Additionally, this electrode exhibits high reproducibility, good stability, and high repeatability, with RSD values of 1.72 %, 1.32 %, and 1.19 %, respectively. The detection efficacy of the proposed electrode has been further examined in food extracts, namely orange, spinach, papaya, soybean, and cooked rice, which endorsed high accuracy compared to the high-performance liquid chromatography (HPLC) method. Moreover, the statistical results obtained from the t-test analysis were also satisfactory for the FA concentrations present in those five samples.

Molecularly imprinted polymer composite membranes: From synthesis to diverse applications.

This review underscores the fundamentals of MIP-CMs and systematically summarizes their synthetic strategies and applications, and potential developments. MIP-CMs are widely acclaimed for their versatility, finding applications in separation, filtration, detection, and trace analysis, as well as serving as scaffolds in a range of analytical, biomedical and industrial contexts. Also characterized by extraordinary selectivity, remarkable sensitivity, and outstanding capability to bind molecules, those membranes are also cost-effective, highly stable, and configurable in terms of recognition and, therefore, inalienable in various application fields. Issues relating to the potential future for the paper are discussed in the last section with the focus on the improvement of resource practical application across different areas. Hence, this review can be seen as a kind of cookbook for the design and fabrication of MIP-CMs with an intention to expand the scope of their application.

Selective and sensitive molecularly imprinted polymer-based electrochemical sensor for detection of deltamethrin.

Electrochemical sensors have a broad range of industrial applications due to their sensitivity, speed, and cost-effectiveness. These sensors enable the continuous monitoring and control of critical parameters in various industrial processes. For instance, they are essential in food safety, environmental monitoring, biomedical applications, and pharmaceutical production. In the food industry, electrochemical sensors facilitate the rapid and reliable detection of contaminants and pathogens in food products, thus enhancing product quality and consumer safety. An electrochemical sensor was developed with the molecularly imprinted polymer (MIP) technique to detect deltamethrin with high sensitivity and selectivity. The sensor was fabricated by electrodeposition of Co3O4 on indium tin oxide (ITO), followed by electropolymerization of o-phenylenediamine with deltamethrin as a template molecule. The template molecules were then removed from the modified electrode by a methanol. The MIP-based electrochemical sensor exhibited high sensitivity and selectivity towards deltamethrin. Under the optimized conditions, the LOD values for the MIP/Co3O4/ITO electrode in the first and second linear regressions were 1.53 nM for linear range of 2.82 nM to 56.5 nM and 0.34 µM for linear range of 0.25 µM to 3.98 µM. Moreover, the LOD values for the NIP/Co3O4/ITO electrode in the first and second regressions were 2.43 nM for the linear range of 3.91 nM to 65.0 nM and 726.0 nM for the linear range of 0.023 µM to 4.5 µM. The developed electrochromic pesticide sensor, being an electrochemical-based molecularly imprinted polymer (MIP) sensor incorporating electrochromic materials, enables both target-specific pesticide detection and visual pesticide identification based on color changes dependent on pesticide concentration. Consequently, this system is more advantageous compared to electrochemical-based MIP sensors, as it provides both qualitative and quantitative determinations. The qualitative assessment aims to enhance the ease of use of the sensor, thereby increasing the potential for it to become a commercially viable product by reducing the need for instrumental devices.

Assessment of Acrylamide Levels by Advanced Molecularly Imprinted Polymer-Imprinted Surface Plasmon Resonance (SPR) Sensor Technology and Sensory Quality in Homemade Fried Potatoes.

This study evaluated acrylamide (AA) levels and various quality parameters in homemade fried potatoes prepared in different sizes by integrating principles from the Slow Food Movement with advanced sensor technology. To this aim, a surface plasmon resonance (SPR) sensor based on a molecularly imprinted polymer (MIP) was first developed for the determination of AA in homemade fried potatoes at low levels, and the AA levels in the samples were established. First of all, monolayer formation of allyl mercaptane on the SPR chip surface was carried out to form double bonds that could polymerize on the chip surface. AA-imprinted SPR chip surfaces modified with allyl mercaptane were prepared via UV polymerization using ethylene glycol dimethacrylate (EGDMA) as a cross-linker, N,N'-azobisisobutyronitrile (AIBN) as an initiator, and methacryloylamidoglutamicacid (MAGA) as a monomer. The prepared AA-imprinted and nonimprinted surfaces were characterized by atomic force microscopy (AFM) and Fourier transform infrared (FTIR) spectroscopy methods. The SPR sensor indicated linearity in the range of 1.0 × 10-9-5.0 × 10-8 M with a detection limit (LOD) of 3.0 × 10-10 M in homemade fried potatoes, and the SPR sensor demonstrated high selectivity and repeatability in terms of AA detection. Additionally, the highest AA level was observed in the potato sample belonging to the T1 group, at 15.37 nM (p < 0.05), and a strong and positive correlation was found between AA levels and sensory parameters, the a* value, the ΔE value, and the browning index (BI) (p < 0.05).

Environmentally friendly molecularly imprinted polymers as an insert for SPE type columns in the gentamicin monitoring process.

The quantity and variety of micro-pollutants infiltrating water resources have increased rapidly in recent times. The appearance of many harmful substances in the waters has resulted in so-called chemical cocktails which significantly contribute to the deterioration of water quality. Additionally, the variety of these compounds, often similar to each other in terms of molecular weights, makes their separation and identification very difficult. In this paper we present the possibility of using self-regenerating mechanism of molecularly imprinted polymers to measure the concentration of micropollutants in the aquatic environment. Molecularly imprinted polymers toward gentamicin were prepared by monomer polymerization in aqueous solution at ambient temperature. Results from computer-based molecular modelling demonstrated potential binding sites between gentamicin and functional monomers in water. Various compositions of polymerization mixtures were tested. The ratio of monomers to each other was 1.1:1.4:0.0015 and 1:1:1 for N-isopropylacrylamine:acrylamide:acrylic acid, respectively. For each composition, various amounts of the standard were tested: 0, 3, 5, 7, 10,15 mol% in relation to monomers. The best results were obtained for 5 % gentamicin with an excess of acrylamide in relation to the other monomers. Sorption for this system was 0.783 mg/g at ambient temperature and desorption 0.593 at 4 °C. The synthesized materials, thanks to the incorporation of thermosensitive poly(N-isopropylacrylamide) into their structures, were able to release 89 % of adsorbed gentamicin. This made it possible to use the designed SPE columns repeatably with similar efficiency. The prepared materials were selective in the presence of other antibiotics like amoxicillin and norfloxacin.

Sensitive Coatings Based on Molecular-Imprinted Polymers for Triazine Pesticides' Detection.

Triazine pesticide (atrazine and its derivatives) detection sensors have been developed to thoroughly check for the presence of these chemicals and ultimately prevent their exposure to humans. Sensitive coatings were designed by utilizing molecular imprinting technology, which aims to create artificial receptors for the detection of chlorotriazine pesticides with gravimetric transducers. Initially, imprinted polymers were developed, using acrylate and methacrylate monomers containing hydrophilic and hydrophobic side chains, specifically for atrazine, which shares a basic heterocyclic triazine structure with its structural analogs. By adjusting the ratio of the acid to the cross-linker and introducing acrylate ester as a copolymer, optimal non-covalent interactions were achieved with the hydrophobic core of triazine molecules and their amino groups. A maximum sensor response of 546 Hz (frequency shift/layer height equal to 87.36) was observed for a sensitive coating composed of 46% methacrylic acid and 54% ethylene glycol dimethacrylate, with a demonstrated layer height of 250 nm (6.25 kHz). The molecularly imprinted copolymer demonstrated fully reversible sensor responses, not only for atrazine but also for its metabolites, like des-ethyl atrazine, and structural analogs, such as propazine and terbuthylazine. The efficiency of modified molecularly imprinted polymers for targeted analytes was tested by combining them with a universally applicable quartz crystal microbalance transducer. The stable selectivity pattern of the developed sensor provides an excellent basis for a pattern recognition procedure.

Developments and Applications of Molecularly Imprinted Polymer-Based In-Tube Solid Phase Microextraction Technique for Efficient Sample Preparation.

Despite advancements in the sensitivity and performance of analytical instruments, sample preparation remains a bottleneck in the analytical process. Currently, solid-phase extraction is more widely used than traditional organic solvent extraction due to its ease of use and lower solvent requirements. Moreover, various microextraction techniques such as micro solid-phase extraction, dispersive micro solid-phase extraction, solid-phase microextraction, stir bar sorptive extraction, liquid-phase microextraction, and magnetic bead extraction have been developed to minimize sample size, reduce solvent usage, and enable automation. Among these, in-tube solid-phase microextraction (IT-SPME) using capillaries as extraction devices has gained attention as an advanced "green extraction technique" that combines miniaturization, on-line automation, and reduced solvent consumption. Capillary tubes in IT-SPME are categorized into configurations: inner-wall-coated, particle-packed, fiber-packed, and rod monolith, operating either in a draw/eject system or a flow-through system. Additionally, the developments of novel adsorbents such as monoliths, ionic liquids, restricted-access materials, molecularly imprinted polymers (MIPs), graphene, carbon nanotubes, inorganic nanoparticles, and organometallic frameworks have improved extraction efficiency and selectivity. MIPs, in particular, are stable, custom-made polymers with molecular recognition capabilities formed during synthesis, making them exceptional "smart adsorbents" for selective sample preparation. The MIP fabrication process involves three main stages: pre-arrangement for recognition capability, polymerization, and template removal. After forming the template-monomer complex, polymerization creates a polymer network where the template molecules are anchored, and the final step involves removing the template to produce an MIP with cavities complementary to the template molecules. This review is the first paper to focus on advanced MIP-based IT-SPME, which integrates the selectivity of MIPs into efficient IT-SPME, and summarizes its recent developments and applications.

Application of zirconium aspartic acid metal-organic framework (MIP-202(Zr)) for high efficient ruthenium adsorption from aqueous solutions.

The zirconium metal - organic framework MIP-202(Zr), based on L-aspartic acid, was prepared by hydrothermal method and used for study of ruthenium adsorption from aqueous solutions. The obtained material was characterized by X-ray diffraction (XRD), infra red spectroscopy (IR), thermogravimetric analysis (TGA), differential scanning calorimetry (DSC), scanning electron microscopy (SEM) and X-ray photoelectron spectroscopy (XPS). The batch adsorption experiment was performed for determination of adsorption equilibrium, kinetics and thermodynamics parameters to Ru(III) from aqueous solution on MIP-202(Zr). The data of ruthenium sorption onto MIP-202(Zr) were fitted and analyzed by the Langmuir, Freundlich and Temkin equilibrium isotherm models, while the Langumir adsorption isotherm models fit the best. Kinetic data were analyzed by four kinetic models, and ruthenium sorption on MIP202(Zr) can be describes the best by intra particle diffusion (Weber Morris). Analysis of thermodynamic properties of ruthenium ions sorption onto MIP-202(Zr) shows that the sorption process has a spontaneous and endothermic nature and is energetically beneficial.

Development and validation of an imprinted polymer based DGT for monitoring ß-blocker drugs in wastewater surveillance.

Wastewater surveillance is an effective and objective approach to monitor contaminant releases and drug usage in the catchment, the estimation requires accurate measurement. In this study, a novel diffusive gradients in thin-film (DGT) technique based on molecularly imprinted polymers (MIPs) for selective measurement of a class of widely prescribed cardiovascular drugs (ß-blockers) in wastewater was developed. The synthesized MIPs showed strong affinity and selectivity for the target compounds. The MIP-DGT had large effective capacities, its performance was independent of a wide range of environmental conditions, including pH (4.58 - 8.89), ionic strength (0.01 - 0.5 M) and dissolved organic matter (< 20 mg L-1). Biofouling had little effect on the uptake of target compounds within 7 days. MIP-DGT devices were applied in a Chinese urban WWTP alongside an auto-sampler. Metoprolol concentrations detected were much higher than other ß-blockers. Concentrations obtained using MIP-DGT were comparable to the 24 h composite samples using an autosampler. The estimated daily consumption calculated based on the data obtained with MIP-DGT implied that metoprolol and propranolol were the most popular ß-blockers in the studied area. Overall, the results in this study demonstrate that the MIP-DGT is a cost-effective, reliable and efficient tool for in situ wastewater monitoring.

Oxymatrine alleviates NSAID-associated small bowel mucosal injury by regulating MIP-1/CCR1 signalling and gut microbiota.

Oxymatrine (OMT) as a quinazine alkaloid extracted from matrine has been shown to exhibit anti-inflammatory and anti-tumour effects. However, the protective mechanism of OMT on NSAID-associated small bowel mucosal injury remains unreported. We found that OMT could improve the clinical symptoms and pathological inflammation scoring, reduce the secretion of proinflammatory cytokines IL-1ß, IL-6 and TNF-α and cell apoptosis, promote cell proliferation and protect intestinal mucosal barrier as compared with the Diclofenac Sodium (DS) group. Further RNA-seq and KEGG analysis uncovered that the differentially expressed genes between DS and control groups were mainly enriched in immune regulation, of which MIP-1γ and its receptor CCR1 expression were validated to be repressed by OMTH. MAPK/NF-κB as the MIP-1 upstream signalling was also inactivated by OMT treatment. In this study, OMT regulated gut microbiota. Venn diagrams visualized and identified 1163 shared OTUs between DS group and OMTH group. The results showed that the α diversity index in the DS group was lower than that in the OMTH group, indicating that the complexity of the flora was reduced in the intestinal inflammatory state. ß diversity mainly includes Principal Component Analysis (PCA) and Principal Co-ordinates Analysis (PCoA). The differences between groups can be observed through PCA. The more similar the composition of the flora, the closer the samples are. We found that the difference was smaller in the DS group than in the OMTH group. The results of PcoA showed that the sample similarity between OMTH groups was the highest. Moreover, gut microbiota analysis unveiled that the abundances of Ruminococcus 1, Oscillibacter and Prevotellaceae at the genus level as well as Lactobacillus SP-L-Yj at the species level were increased in OMTH group as compared with the DS group but the abundance of Allobaculum, Ruminococceos-UCG-005, Ruminococceos-NK4A214 and Clostridium associated with DS-induced small bowel mucosal injury could be decreased by OMTH. MIP-1α and CCR1 were upregulated in human small bowel injury samples as compared with the normal ileal mucosa tissues. In conclusion, our findings demonstrated that OMT could alleviate NSAID-associated small bowel mucosal injury by inhibiting MIP-1γ/CCR1 signalling and regulating gut microbiota.

The Role of Advanced Post-processing Techniques in Computed Tomography Pulmonary Angiography for the Accurate Diagnosis of Pulmonary Thromboembolism: A Retrospective Study.

Background Computed tomography pulmonary angiography (CTPA) is the standard diagnostic tool for evaluating patients with suspected pulmonary thromboembolism (PTE) in many institutions. This condition, whether acute or chronic, results in both partial and complete intraluminal filling defects, which exhibit sharp interfaces with intravascular contrast material. Acute PTE that leads to complete arterial occlusion may cause the affected artery to appear enlarged. Chronic PTE often manifests as complete occlusive disease in vessels that are smaller than the adjacent patent vessels. CT imaging with iodinated contrast medium is crucial for many CT applications, including vascular CT angiography and CTPA. A comprehensive review of a case necessitates an integrated approach known as volume visualization, wherein the entire case is treated as a volume of information to be thoroughly reviewed. Advanced post-processing 3D CT techniques, such as maximum intensity projection (MIP), volume rendering (VR), and minimum intensity projection (MinIP) images, are essential for the detailed detection and assessment of the pulmonary vasculature. Materials and methods In this retrospective study, data from 50 patients with suspected PTE were analyzed over a six-month period from March 15 to August 30, 2023, at Saveetha Medical College and Hospital. Patients were selected based on previously recorded clinical symptoms and elevated D-dimer levels. CTPA images, acquired using multi-detector CT imaging with iodinated contrast, were reviewed. Various post-processing techniques were employed, including multiplanar reconstruction (MPR), MIP, MinIP, and VR. The aim of this study was to evaluate the effectiveness of CTPA combined with advanced post-processing techniques in improving early detection, reducing diagnostic time, and increasing accuracy through the detailed visualization of the pulmonary arterial vasculature. Results The study included patients aged from 10 years to 70 years, with the highest prevalence of PTE in the 21-35-year age group (46%). Males constituted 56% of the cases. CTPA with advanced post-processing techniques revealed filling defects in 90% of patients, confirming PTE. MPR, MIP, MinIP, and VR effectively highlighted anatomical structures and thrombi, enhancing diagnostic accuracy. These techniques demonstrated high accuracy in identifying PTE, emphasizing their critical role in the early diagnosis and management of thromboembolic events. Conclusion The findings of the study revealed a relatively high incidence of PTE especially in the 21-35-year age group with a slight male predominance. The significant majority of the patients (90%) had filling defects on their CTPA scan. CTPA, in conjunction with the use of post-processing techniques, the localization of thromboembolism sites, as well as the measurement of thrombus width and length, and the calculation of the percentage of blockage were achieved more easily. This facilitated accurate diagnosis, leading to improved patient outcomes.

Plasma concentrations of IL-6, MIP-1ß, IP-10, and PTX-3 as predictors of the immunological response to antiretroviral treatment in people with HIV.

Despite effective antiretroviral therapy (ART), 15-30% of people with HIV experience poor CD4+ T-cell recovery, termed immunologic non-responders (INR). This study aims to evaluate whether pre-ART plasma levels of interleukin-6 (IL-6), interferon gamma-induced protein-10 (IP-10), macrophage inflammatory protein-1-ß (MIP-1ß), and/or pentraxin-3 (PTX-3) could predict subsequent immunologic recovery. Seventy-four participants were enrolled and classified as INR and immunologic responders (IR) based on CD4+/CD8+ ratio increase over 24 months after starting ART. The results showed no significant differences in cytokine levels between INR and IR. Therefore, IL-6, IP-10, MIP-1ß, and PTX-3 were unsuitable as predictive markers of poor immune recovery.

The Phase Change Heat of Water in the Pore Space of Rocks Based on DSC Studies.

This research investigates the phase change behavior of water within the pore space of Devonian carbonate rock samples using Differential Scanning Calorimetry (DSC) across a temperature range of -80 to 0 °C. This study focuses on dolomite and limestone samples, all with porosities below 3%, an area not extensively covered in previous literature. Significant endothermic effects were observed at temperatures below -2 °C, challenging conventional understanding. The study reveals that the latent heat of phase change in these systems can exceed 334.2 J/g, the known value for bulk water, indicating unique thermodynamic properties of water in confined spaces. For the dolomite rock sample, observed endothermic heat effects below -2 °C were 23.5% and 26.7% of total phase change energy. The cumulative pore volume calculated using the thermoporometry method was found to be higher than expected from water occupancy alone, independent of assumptions about the thickness of the adsorbed unfreezable water layer or pore shape (spherical or cylindrical). This research provides novel insights into unfrozen water content calculations, significantly enhancing frost durability assessments and the geoengineering industry.