The Outcome of Decoronation in Severe Cases of External Cervical Root Resorption in Young Patients.

This study examines decoronation as a treatment option for teeth with progressive external cervical root resorption (ECR). Six young patients aged 9.5-13, with a total of nine incisor teeth affected by ECR due to previous dental trauma, were treated by decoronation. Six teeth were classified as class 4 and two as class 3, according to Heithersay's classification. Another tooth with class 2 resorption also had a perforation. After decoronation, all cases showed favorable outcomes during a follow-up period of 2.5-8 years. The procedure halted the progression of ECR and promoted vertical and horizontal ridge development above the submerged root. Decoronation can be considered for the successful treatment of advanced cases of ECR in young patients.

Cone-beam CT evaluation of post-extraction alveolar bone changes at the maxillary incisor sites in an East Asian population: A cross-sectional study.

Objective: Understanding the characteristics of alveolar bone resorption in an East Asian population after maxillary incisor extraction and providing a reference for implant treatment plans. Study design: Cone-beam computerized tomography (CBCT) data of 125 East Asian patients with unilateral extraction of maxillary incisors for 3 months were collected. The alveolar bone width and height in the extraction sites were measured and compared with the corresponding contralateral sites. Results: The differences in alveolar bone width between the extraction site and contralateral site were as follows: 4.11 mm, 2.68 mm, and 2.09 mm (3 mm, 5 mm, 7 mm apical from CEJ of the contralateral tooth). Data are expressed as the median. The horizontal resorption ratio of alveolar bone was 49.94 %, 31.5 %, and 24.46 %. The difference in alveolar bone height was 0.78 mm. The vertical resorption ratio was 7.78 %. The resorption did not differ significantly between sexes and was not significantly affected by tooth positions. Conclusions: In the studied East Asian population, significant horizontal and vertical alveolar bone resorption occurs after natural healing of maxillary incisor extraction for 3 months. The closer to the alveolar ridge crest, the more significant the horizontal resorption, resulting in an "inverted triangle" shape residual alveolar bone.

Design and Biomechanical Analysis of Customized Angled Abutment Based on Tooth Inclination Angle for Immediate Implant Placement on Maxillary Anterior Region.

PURPOSE: Finite element analysis and an in vitro experiment were employed to investigate the loading effects of angled abutments, comparing various customized angled abutments derived from the average angle of incisors in patients with a commercial 15°∆ angled abutment, on both the implant and surrounding bone. METHODS: Four customized angled abutment models (21.9°∆, 24.15°∆, 20.22°∆, 33°∆) were developed using cone-beam computed tomography (CBCT) images of incisor inclination from various age groups of patients. 3D maxillary bone models were created from CBCT images of four individual patients. Finite element analysis and in-vitro strain gauge experiments were conducted, applying 100N or 50N of axial or oblique force, to assess the differences in stress/strain between the customized and the commercial 15°∆ angled abutments in both the implants and surrounding bone. RESULTS: Under axial loading, the stress values in the dental implant and surrounding bone were elevated due to the relatively higher angles of the customized angled abutments (21.9°∆, 24.15°∆, 20.22°∆, 33°∆) when compared to the commercial 15°∆ angled abutment; however, under oblique loading the commercial 15°∆angled abutment exhibited higher stress values in both the implant and surrounding bone. For in vitro experiment, there is no statically difference in bone strain between the customized (21.9°∆) and the commercial 15°∆ angled abutments in axial loading. Nevertheless, in oblique loading using a commercial 15°∆ angled abutment induced the higher bone strains. CONCLUSION: Customized angled abutments offer lower stress/strain under oblique loads but higher stress/strain under axial loads compared to commercial ones. Therefore, in the design and application of angled abutments, careful consideration of the occlusal load direction is paramount for achieving biomechanical success of dental implant.

Surgical accuracy of CAD/CAM splints using virtual surgical planning in orthognathic surgery: policy implications for healthcare in Australia.

BACKGROUND: This study examines post-surgical outcomes of maxillary position using virtual surgical planning (VSP) with computer designed and manufactured surgical splints, without the use of costly patient specific implants (PSI), in the treatment of routine nonsyndromic orthognathic patients. The cost of these personalized medical devices and their impact in the setting of cranio-maxillofacial surgery is currently under review by The Department of Health and Aged Care in Australia. METHODS: This is a single-centre retrospective analysis of 49 patients who underwent bimaxillary orthognathic surgery by a single surgeon at Epworth Richmond Hospital (Victoria, Australia) over a period spanning 2016 to 2020. Patients were included in the study provided their surgery was facilitated using VSP with manufacture of computer designed occlusal splints. RESULTS: Use of computer designed and manufactured splints were highly reliable in reproducing the virtual surgical plan, when using palatal plane, upper incisor angulation, and anterior upper facial height. CONCLUSION: Use of computer designed and manufactured splints provide a method of leveraging the accuracy of VSP methods, without the additional costs associated with PSI. These findings may assist in appropriate resource allocation and case stratification in patients undergoing orthognathic surgery.

Autogenous bone ring augmentation around single tooth implantation in the esthetic zone: A retrospective case series study with 2-3 years of follow-up.

Background: /purpose: Bone ring technique (BRT) is an effective method to reconstruct alveolar bone defects with simultaneous implant placement. This study aimed to evaluate the efficacy of the BRT in single maxillary anterior tooth implantation and its esthetic outcomes over 2-3 years of follow-up. Materials and methods: Fifteen patients with single maxillary incisor loss received autogenous BRT with simultaneous implant placement. The vertical/horizontal bone gain, remaining vertical bone height (RVBH), remaining buccal bone width (RBBW), and vertical/horizontal bone resorption around implant over 2-3 years of follow-up were measured by using cone-beam computed tomography. Esthetic results including white esthetic score (WES), pink esthetic score (PES), and papilla index (PI) were evaluated by clinical recorded photographs. Results: All implants showed evidence of osseointegration, and the mean vertical and horizontal bone gain of 14 sites was 5.55 ± 0.87 mm and 4.73 ± 0.70 mm, respectively. During 2-3 years of follow-up, all mean values of RBBW were more than 2 mm. Main vertical bone loss appeared within 4 months after surgery and the RVBH value decreased as the follow-up duration continued. Maximum buccal bone thickness resorption mostly appeared in the middle level of the implant during the primary two follow-up periods (P < 0.05). Esthetic results showed that the mean WES/PES was higher than 17, and more than half cases demonstrated relatively high PI (3 points) throughout the follow-up. Conclusion: BRT could achieve excellent bone augmentation effect and can offer predictable esthetic outcomes for single tooth implant restoration in the esthetic zone.

Concomitant Crown Dilaceration and Concrescence in Maxillary Incisors following Trauma to their Primary Predecessors: A Case Report.

Developmental disturbances in the permanent dentition are commonly seen due to traumatic injuries to the primary teeth, especially intrusive and avulsion injuries of the overlaying primary incisors. These disturbances may range from enamel discoloration or hypoplasia, crown/root dilaceration, odontoma-like malformation and eruption disturbances. Concrescence is extremely rare in anterior teeth. This case report describes a rare case that showed a concrescence of the unerupted maxillary right lateral incisor and maxillary central incisor with crown dilaceration. Awareness regarding early diagnosis and the consequences of untreated trauma to primary teeth should be emphasized.

Quantification of the apical palatal bone index for maxillary incisor immediate implant assessment: A retrospective cross-sectional study.

BACKGROUND: Apical palatal bone is important in immediate implant evaluation. Current consensus gives qualitative suggestions regarding it, limiting its clinical decision-making value. OBJECTIVES: To quantify the apical palatal bone dimension in maxillary incisors and reveal its quantitative correlation with other implant-related hard tissue indices to give practical advice for pre-immediate implant evaluation and design. MATERIAL AND METHODS: A retrospective analysis of immediate implant-related hard tissue indices in maxillary incisors obtained by cone beam computed tomography (CBCT) was conducted. Palatal bone thickness at the apex level (Apical-P) on the sagittal section was selected as a parameter reflecting the apical palatal bone. Its quantitative correlation with other immediate implant-related hard tissue indices was revealed. Clinical advice of pre-immediate implant assessment was given based on the quantitative classification of Apical-P and its other correlated immediate implant-related hard tissue indices. RESULTS: Apical-P positively correlated with cervical palatal bone, whole cervical buccal-palatal bone, sagittal root angle, and basal bone width indices. while negatively correlated with apical buccal bone, cervical buccal bone, and basal bone length indices. Six quantitative categories of Apical-P are proposed. Cases with Apical-P below 4 mm had an insufficient apical bone thickness to accommodate the implant placement, while Apical-P beyond 12 mm should be cautious about the severe implant inclination. Cases with Apical-P of 4-12 mm can generally achieve satisfying immediate implant outcomes via regulating the implant inclination. CONCLUSIONS: Quantification of the apical palatal bone index for maxillary incisor immediate implant assessment can be achieved, providing a quantitative guide for immediate implant placement in the maxillary incisor zone.

Does different vertical position of maxillary central incisors in women with different facial vertical height affect smile esthetics perception?

BACKGROUND: The aim of this study was to assess the esthetic perceptions of orthodontists, prosthodontists and laypersons with regard to different vertical positions of the maxillary central incisors related to lateral incisors for different facial vertical height cases. SUBJECT AND METHODS: Frontal full-face photographs showing social smiles of three adult women aged between 18 and 25 years were used. Vertical position of the maxillary central incisor was changed (intruded or extruded) with 0.5 mm increments according to the reference gingival line resulting five images for each woman in a full-face view yielding a total of 15 images. A visual analog scale was placed below each smile to allow the raters to evaluate the attractiveness of each smile independently. One-way analysis of variance was used to determine whether there was a difference between more than two independent groups in terms of quantitative variables. Comparisons of more than two dependent groups were examined with repeated measures one-way ANOVA. The significance level was taken as 0.05 for all analyses. RESULTS: For increased facial vertical height, the highest scores for orthodontists were given to the 0.5 mm extruded (64.18 ± 26.36), for prosthodontists to the control (57.28 ± 19.80), and for layperson to the 1 mm extruded (61.27 ± 25.98) central incisor position. For decreased facial vertical height, the highest scores were obtained at the 0.5 mm intrusion with an increasing pattern from orthodontists to laypersons (63.95 ± 22.08 for orthodontists, 79.87 ± 21.43 for prosthodontists, and 79.88 ± 19.17 for laypersons). All three rater groups gave the highest scores to the 0 mm (control) smile design for normal facial vertical height. When these scores were compared among the groups, laypersons gave significantly higher scores compared to orthodontists (p < 0.001) and prosthodontists (p = 0.005). CONCLUSIONS: The facial vertical height significantly affected the perception of smile esthetics. Keeping the distance between the central and lateral incisors longer than 1 mm in individuals with increased facial height may be important in terms of increasing patient satisfaction in terms of clinical aesthetics. On the contrary, keeping the distance between the central and lateral incisors shorter than 1 mm may create a more esthetically acceptable result in individuals with short facial height.

The influence of maxillary incisor angles on the stress distributions of temporomandibular joints under incisal biting.

BACKGROUND AND OBJECTIVE: The incisal biting was one of the most regular jaw activities. The direction of bite force on the incisor tip and the mandible position were relevant to the incisor angle as biting. This study was carried out to explore the influence on the temporomandibular joint (TMJ) caused by the incisor angle. METHODS: Twenty individuals belonging to three incisor subtypes of the buccal type were recruited. In addition, the 3D models including the maxillary, mandible and discs were established based on their cone-beam computed tomography and magnetic resonance imaging scannings. Then, the mandibular ligaments and the discal attachments were simulated in the finite element models to analyze the stress distributions of the TMJs under incisal biting. RESULTS: The TMJ stresses of subtype I showed normal range and distribution. The stresses of the intermediate temporal bone tended to increase in subtype II. The intermediate and posterior bands of the discs sustained greater tensile stresses in subtype III. CONCLUSIONS: Abnormal stress distributions are harmful to TMJs, so the incisor cusp was not suggested to incline to the palatal side too much.

Comparative evaluation of variations in torque expression in maxillary incisor and canine using different bracket prescriptions placed at different crown levels by finite element (FE) method: An in-vitro analysis.

OBJECTIVE: While using preadjusted brackets, the position of the bracket on the crown is one of the deciding factors that determine the tooth's final tip, torque, height, and rotation. The final tooth position is not optimal if the bracket is placed incorrectly or if the varying crown morphology does not correspond with the bracket design. The present study was conducted to evaluate and compare the variations in torque expression in maxillary incisor and canine using different bracket prescriptions placed at different crown levels by finite element method. METHODS: For the present study, three-dimensional models of maxillary right central incisor and canine were made using CREO version 4.0 software. CREO is a powerful three-dimensional (3-D) computer-based, computer-aided design (CAD) software developed by Parametric Technology Corporation (PTC) to aid in design processes. Simulation was done to replicate the clinical situation of an active palatal root torque acting on the incisor and canine. The induced palatal movement of root tips and labial movement of crowns tips, overall stress, and von Mises stress generated in the brackets and the total equivalent strains developed in the periodontal ligament (PDL) were calculated, while the values obtained were tabulated and subjected to statistical analysis. RESULTS: Based on the findings of the present study, the average maximum stress produced in the bracket was calculated as 265.069 Mpa in incisor and 166.742 Mpa in the canine. Likewise, the average of the maximum displacement of root apex observed in the present study was calculated as 0.01401 mm in the incisor and 0.00421 mm in the canine, while the average strain developed in the PDL was calculated as 0.0587 for incisor and 0.0498 for the canine. Furthermore, it was, also, observed that the magnitude of strain developed in the PDL increased with increase in the stress produced by the bracket prescription for both incisor and canine. CONCLUSIONS: Within the limitations of the present study, it was concluded that the magnitude of displacement of root apex was significantly influenced by bracket prescription and bracket position. Also, the stress developed in the bracket was influenced by bracket prescription and position, while the variation in crown morphology in the incisor and canine played a significant role in the eventual strain developed in the PDL after torque application.

Customized maxillary incisor position relative to dentoskeletal and soft tissue patterns in Chinese women: A retrospective study.

Objective: To provide reliable prediction models based on dentoskeletal and soft tissue variables for customizing maxillary incisor positions and to optimize digitalized orthodontic treatment planning. Methods: This study included 244 Chinese women (age, 18-40 years old) with esthetic profiles after orthodontic treatment with fixed appliances (133 in group I: 1° ≤ The angle between the nasion [N]-A point [A] plane and the N-B point [B] plane [ANB] ≤ 4°; 111 in group II: 4° < ANB ≤ 7°). Dental, skeletal, and soft tissue measurements were performed on lateral cephalograms of the participants. Correlation and multiple linear regression analyses were used to determine the influence of dentoskeletal and soft tissue variables on maxillary incisor position. Results: The ideal anteroposterior position of the maxillary incisor varied between sagittal skeletal patterns. The position of the maxillary incisor correlated with the sagittal discrepancy between the maxilla and the mandible (ANB), protrusion of the midface, nasal tip projection, development of the chin, and inclination of both the maxillary and mandibular incisors. Distance from the maxillary central incisor to nasion-pogonion plane predicted using multiple linear regression analysis was accurate and could be a practical measurement in orthodontic treatment planning. Conclusions: Instead of using an average value or norm, orthodontists should customize a patient's ideal maxillary incisor position using dentoskeletal and soft tissue evaluations.

Endodontic Management of a Two-Rooted Maxillary Central Incisor Using Cone-Beam Computed Tomography: A Case Report.

Practitioners need to know the normal and complex anatomy of the root canal system of individual teeth. Maxillary central incisors almost in all cases have one root and one root canal system. This case report describes a non-surgical endodontic treatment of a double-rooted maxillary central incisor using cone-beam computed tomography (CBCT). A fourteen-year-old male with spontaneous pain of the maxillary left incisor showed the presence of an extra root on the periapical radiograph. CBCT was used to assess the root canal details that lead to finding a narrow root in the mesial of the main root. Also, a periapical bone defect was detected. Nonsurgical treatment of tooth performed. At the 3-month follow-up, the tooth was functional and the lesion was healed. Therefore, practitioners should consider the presence of extra roots and canals during root canal treatment. CBCT imaging helps in detecting the exact location of the extra root.

Treatment of External Cervical Resorption and Its Late Complication: A Case Report.

External cervical resorption is a type of pathological root resorption that is often asymptomatic. It leads to progressive loss of dental hard tissues while the pulp usually remains vital. The first symptom reported by a patient may be a pink shadow at an esthetic zone. This case report describes the treatment of external cervical resorption of a first upper incisor according to the new classification, treatment and management methods introduced in 2018. After 30 months the endodontic treatment was performed due to pulp necrosis and symptomatic apical periodontitis.

Relationship of Nasolabial Angle with Maxillary Incisor Proclination and Upper Lip Thickness in North Indian Population.

Aim: The aim of the study was to evaluate the relationship between nasolabial angle (NLA) with maxillary incisor proclination (U1-NA) and upper lip thickness (ULT). Materials and methods: Pretreatment lateral cephalometric radiographs of 120 patients were taken, and NLA, U1-NA, and basic ULT measurements were obtained for each patient. Descriptive statistics were calculated for all the variables involved in the study. The correlation was found using the Pearson correlation coefficient (r) test. p < 0.01 was considered statistically significant. Results: The mean values of NLA, upper incisor proclination, and ULT were found to be 91.38° ± 7.10°, 34.21° + 5.17°, and 15.38 ± 1.76 mm, respectively. r (r = -0.583) was found between NLA and upper incisor proclination and (r = -0.040) for NLA and ULT. Conclusion: There is a statistically significant relationship between NLA and U1-NA. How to cite this article: Garg H, Khundrakpam D, Saini V, et al. Relationship of Nasolabial Angle with Maxillary Incisor Proclination and Upper Lip Thickness in North Indian Population. Int J Clin Pediatr Dent 2022;15(5):489-492.

Morphologic analysis of alveolar bone in maxillary and mandibular incisors on sagittal views.

PURPOSE: The aim of this study was to analyze the morphologic features of alveolus in relatively healthy maxillary and mandibular incisors using cone-beam-computed tomography (CBCT). METHODS: CBCT images of 318 patients were retrospectively acquired. Alveolar bone in incisive area was divided into: type 1 (thick), type 2 (relatively thick with mono-plate concavity), type 3 (thin with double-plate concavities), and type 4 (vulnerably thin). Alveolus prevalence and widths were analyzed statistically relative to age, gender, and molar relationship. RESULTS: Prevalence of type 1 alveolus was 78.9% in maxillary central incisors, 15.1% in maxillary lateral incisors, 24.1% in mandibular central incisors, and 5.0% in mandibular lateral incisors. Type 2 alveolus was commonly observed in the maxillary lateral incisors (82.2%), mandibular central incisors (66.2%), and mandibular lateral incisors (87.9%). Prevalence of type 3 and 4 alveoli ranged from 0.0 to 9.4%. As for maxillary central incisors, type 1 was the widest both at the alveolar crest (7.77 ± 0.58 mm) and apical area (9.05 ± 1.86 mm), while type 3 had the lowest width at the apical region (4.08 ± 0.51 mm). Among maxillary central incisors, prevalence of type 1 tended to decrease with age. At all maxillary and mandibular incisor sites, alveolus widths were significantly thicker in males than in females. At maxillary lateral incisor and mandibular incisor sites, prevalence of alveolus type was significantly different among three molar relationships. CONCLUSION: A 4-type classification system was suggested for alveolus morphology in incisive region. Identification of alveolus type might aid in the corresponding treatment.

Assessment of Maxillary Incisors' Angulation and Position in Different Types of Malocclusions Using Cone-Beam Computed Tomography.

BACKGROUND: This study is aimed to assess the maxillary incisors' root position, angulation, and buccal alveolar bone thickness in both genders and different classes of malocclusion using cone-beam computed tomography (CBCT). MATERIALS AND METHODS: Two hundred and six CBCT images were gathered and analyzed by three-dimensional On-Demand software to measure the variables of 803 maxillary central and lateral incisors. Genders and class difference was determined by unpaired t-test, one-way ANOVA, and Chi-square tests. RESULTS: Buccal root position of the maxillary incisors accounted for in the majority of the cases followed by the middle and palatal positions. The thickness of alveolar bone appears to have nearly the same pattern of decreasing in the mean values above the level of 2 mm from the crest of the bone up to the 6 mm level then increase in the apex of the root. The angle between the long axis of the maxillary incisors and the corresponding alveolar bone is higher significantly in class II followed by class I and III with no significant gender difference. CONCLUSIONS: most of the maxillary incisors examined were located in a very close position to the buccal cortical plate and covered by a thin buccal bone wall. The apparent association was noted between the incisors' root position and angulation in the alveolar bone with the buccal bone thickness.

Alveolar bone response to maxillary incisor retraction using stable skeletal structures as a reference.

OBJECTIVES: To evaluate alveolar bone change in relation to root position change after maxillary incisor retraction via cone-beam computed tomography (CBCT) using stable skeletal structures as a reference. MATERIALS AND METHODS: A total of 17 subjects (age 24.7 ± 4.4 years) who required retraction of the maxillary incisors were included. Labial and palatal alveolar bone changes and root change were assessed from preretraction and 3 months postretraction CBCT images. The reference planes were based on stable skeletal structures. The Kruskal-Wallis test and Wilcoxon signed-rank test were used to compare changes within and between groups, as appropriate. Spearman rank correlations were used to identify the parameters that correlated with alveolar bone change. The significance level was set at .05. RESULTS: The labial alveolar bone change after maxillary incisor retraction was statistically significant (P < .05), and the bone remodeling/tooth movement (B/T) ratio was 1:1. However, the palatal bone remained unchanged (P > .05). The change in inclination was significantly related to labial alveolar bone change. CONCLUSIONS: Using stable skeletal structures as a reference, the change in labial alveolar bone followed tooth movement in an almost 1:1 B/T ratio. Palatal alveolar bone did not remodel following maxillary incisor retraction. The change in inclination was associated with alveolar bone change.

Surgical Sealing of Laterally Localized Accessory Root Canal with Resin Containing S-PRG Filler in Combination with Non-Surgical Endodontic Treatment: A Case Report.

The spread of root canal infection to surrounding periodontal tissue through accessory root canals reduces the success rate of endodontic treatment. In this case, cone-beam computed tomography revealed a lesion (4 mm from the apex) resulting from an accessory root canal of the maxillary left central incisor. First, non-surgical endodontic treatment was conducted but the sinus tract remained. Surgical preparation of the root cavity was then conducted to remove potentially infected dentin surrounding the accessory root canal. The cavity was filled and the foramen was sealed with resin containing bioactive surface pre-reacted glass (S-PRG) filler. The photopolymerized resin was then contoured and polished. In combination with subsequent supportive non-surgical endodontic treatment, a good clinical outcome with the disappearance of the sinus tract and clinical symptoms such as discomfort and pressure pain and the regeneration of the alveolar bone hanging over the cavity was obtained. In this case, the good clinical outcome may have been due to the dentin-adhesive property and durability of the pre-adhesive system and composite resin. The better biocompatibility of S-PRG fillers presumably facilitated periodontal tissue healing.

Surgical Management of Unerupted Permanent Maxillary Central Incisors Due to Presence of Two Supernumerary Teeth.

AIM AND OBJECTIVE: The present report aims to present a case of delayed eruption of permanent maxillary central incisors in an 11-year-old male child due to the presence of two supernumerary teeth in anterior maxilla. CASE DESCRIPTION: In this case, clinical and radiographic assessment revealed the presence of two supernumerary teeth palatal to unerupted maxillary permanent central incisors. These teeth were removed surgically under local anesthesia and were diagnosed as supplemental incisor, and the other appeared like tuberculate with dens invaginatus. CONCLUSION: The permanent incisors erupted spontaneously within 6 months follow-up after extraction of the two supernumerary teeth without any orthodontic interception. HOW TO CITE THIS ARTICLE: Alsweed AA, Al-sughier Z. Surgical Management of Unerupted Permanent Maxillary Central Incisors Due to Presence of Two Supernumerary Teeth. Int J Clin Pediatr Dent 2020;13(4):421-424.

Correlations between objective measurements and subjective evaluations of facial profile after orthodontic treatment.

OBJECTIVE: To investigate the correlations between objective measurements and subjective evaluations of post-treatment facial attractiveness. METHODS: Ten orthodontists rated the subjective visual analog scale (VAS) scores of the facial profiles of 95 patients who had undergone orthodontic treatment. Post-treatment cephalograms and photographs were used. Eleven soft tissue measurements and eight maxillary incisor measurements were constructed and analyzed. Correlations between objective measurements and subjective VAS scores were evaluated using Pearson correlation and quadratic regression analysis. RESULTS: The VAS scores of different facial proportions were all correlated with the total VAS score. Among soft tissue measurements, the distances from the upper and lower lips to the E line, H angle, forehead inclination, distance from lower lip to the H line, and pogonion-menton angle were negatively correlated with the VAS scores. The Z angle, with a parabolic distribution, was also correlated with the VAS scores. Among maxillary incisor measurements, the distance from the maxillary incisors to the forehead's anterior limit line and the angulation of the maxillary incisors to the APo line were negatively correlated with the VAS scores. CONCLUSIONS: Several soft tissue and maxillary incisor position measurements were correlated with facial profile evaluation and therefore might be used to evaluate facial attractiveness.