RESUMO
The pervasive presence of per and polyfluoroalkyl substances (PFAS), commonly referred to as "forever chemicals," in water systems poses a significant threat to both the environment and public health. PFAS are persistent organic pollutants that are incredibly resistant to degradation and have a tendency to accumulate in the environment, resulting in long-term contamination issues. This comprehensive review delves into the primary impacts of PFAS on both the environment and human health while also delving into advanced techniques aimed at addressing these concerns. The focus is on exploring the efficacy, practicality, and sustainability of these methods. The review outlines several key methods, such as advanced oxidation processes, novel materials adsorption, bioremediation, membrane filtration, and in-situ chemical oxidation, and evaluates their effectiveness in addressing PFAS contamination. By conducting a comparative analysis of these techniques, the study aims to provide a thorough understanding of current PFAS remediation technologies, as well as offer insights into integrated approaches for managing these persistent pollutants effectively. While acknowledging the high efficiency of adsorption and membrane filtration in reducing persistent organic pollutants due to their relatively low cost, versatility, and wide applicability, the review suggests that the integration of these methods could result in an overall enhancement of removal performance. Additionally, the study emphasizes the need for researcher attention in key areas and underscores the necessity of collaboration between researchers, industry, and regulatory authorities to address this complex challenge.
RESUMO
Ultrahigh-temperature Joule-heating of carbon nanostructures opens up unique opportunities for property enhancements and expanded applications. This study employs rapid electrical Joule-heating at ultrahigh temperatures (up to 3000 K within 60 s) to induce a transformation in nanocarbon aerogels, resulting in highly graphitic structures. These aerogels function as versatile platforms for synthesizing customizable metal oxide nanoparticles while significantly reducing carbon emissions compared to conventional furnace heating methods. The thermal conductivity of the aerogel, characterized by Umklapp scattering, can be precisely adjusted by tuning the heating temperature. Utilizing the aerogel's superhydrophobic properties enables its practical application in filtration systems for efficiently separating toxic halogenated solvents from water. The hierarchically porous aerogel, featuring a high surface area of 607 m2 g-1, ensures the uniform distribution and spacing of embedded metal oxide nanoparticles, offering considerable advantages for catalytic applications. These findings demonstrate exceptional catalytic performance in oxidative desulfurization, achieving a 98.9% conversion of dibenzothiophene in the model fuel. These results are corroborated by theoretical calculations, surpassing many high-performance catalysts. This work highlights the pragmatic and highly efficient use of nanocarbon structures in nanoparticle synthesis under ultrahigh temperatures, with short heating durations. Its broad implications extend to the fields of electrochemistry, energy storage, and high-temperature sensing.
RESUMO
Background: Fungal contamination of hospital water distribution systems has been implicated in outbreaks of healthcare-associated infections. Objectives: To evaluate the prevalence of fungi in the water distribution system of a tertiary hospital in Nigeria. Design: This was a descriptive cross-sectional study. Methods: Swabs and water samples were collected from taps and faucets in the hospital categorized into low (Accidents and Emergency Unit, Children Emergency Unit, Acute Stroke Unit and the 24 in-patient hospital wards) and high-risk (Renal Dialysis Unit, Central Sterile Services Department, Theatres and Intensive Care Units (ICUs)) units based on the vulnerability of patients being managed there. The membrane filtration method for water analysis was used. Where possible, isolates cultured were identified to species level. In total, 105 water and 49 swab samples were collected for analysis. Results: All analysed water samples grew fungi. A total of 289 (high-risk; n = 178; low-risk; n = 111) and 76 fungi isolates were recorded from water and swab samples, respectively, with 31 different species identified. Aspergillus was the most predominant genus with five different species: Aspergillus niger (9.9%), terreus (4.4%), flavus (3.3%), fumigatus (8.8%) and versicolor (2.20%) isolated. Twenty-five and 18 species of fungi were identified in the low and high-risk units, respectively. The labour ward (n = 46; 25.8%) and modular theatre (n = 47; 42.3%) were the most contaminated units. Cladosporium spp. and Paecilomyces spp. were the most frequently isolated fungi in the low and high-risk units, respectively. The dialysis centre (n = 9; 8.1%) and renal transplant theatre (n = 7; 6.31%) had the lowest contamination rates in the high-risk units. Aspergillus niger, Cephalosporium curtipes, Penicillium chrysogenum and Penicillium glabrum were each identified in 4/6 units from which swabs were taken. The facility had no documented protocol for its water safety and quality. Conclusion: Our data reveal a high rate of contamination of hospital water sources by fungi, some of which are known to cause life-threatening infections. For better water treatment and water tank cleaning and disinfection, a standard protocol is advised. Ensuring that the water distribution systems in hospital settings are free of fungal contaminants is important to prevent the possibility of waterborne mycosis outbreaks.
RESUMO
Organic micropollutants (OMPs) present in water and wastewater are in the spotlight because of their potentially harmful effects even at low concentrations and the difficulties of their elimination in urban wastewater treatment plants (UWWTPs). This study explores the impact of some membrane filtration processes on the removal of a group of 11 OMPs with an eye on the effects of two pretreatments (i.e., coagulation and adsorption onto powdered activated carbon (PAC)) and the adsorption of OMPs onto the membranes on the overall removal. For this purpose, ultrafiltration (UF) and nanofiltration (NF) experiments were conducted with selected OMPs spiked in ultrapure water and secondary effluents from UWWTPs. It was observed that the adsorption of OMPs onto the membranes was influenced by the characteristics of the membranes, as well as the presence of effluent organic matter (EfOM). Since adsorption was the dominant mechanism for the rejection of OMPs by UF membranes, a study of the adsorption equilibrium of the micropollutants using UF membrane pieces as the adsorbent was conducted. The adsorption isotherms for the most hydrophobic OMPs fitted the Langmuir model. The efficiency of coagulation and powdered activated carbon (PAC) adsorption coupled with UF were also investigated. Both pretreatments alleviated membrane fouling and improved the rejection of organic and inorganic matter. The PAC pretreatment significantly improved the removal of OMPs in the combined PAC/UF process. The best options for achieving reclaimed water with satisfactory physicochemical quality, nearly devoid of OMPs and microorganisms, and suitable for diverse reuse purposes are either the NF treatment or the combination of PAC/UF.
RESUMO
Nanocomposites have emerged as promising materials for pollutant removal due to their unique properties. However, conventional synthesis methods often involve toxic solvents or expensive materials. In this study, we present a novel ternary nanocomposite synthesized via a simple, cost-effective vacuum filtration method. The composite consists of calcium phosphate (CaP), biowaste-derived nanocellulose (diameter <50 nm) (NC), and chitosan (CH). The nanocomposite exhibited exceptional pollutant removal capabilities due to the hybrid approach of combining adsorption and size exclusion that widens and accelerates pollutant removal. When tested with synthetic wastewater containing 10 ppm of Ni ions and 10 ppm of Congo red (CR) dye, it achieved impressive removal rates of 98.7% for Ni ions and 100% for CR dye. Moreover, the nanocomposite effectively removed heavy metals such as Cd, Ag, Al, Fe, Hg, Mo, Li, and Se at 100%, and Ba, Be, P, and Zn at 80%, 92%, 87%, and 97%, respectively, from real-world municipal wastewater. Importantly, this green nanocomposite membrane was synthesized without the use of harmful chemicals or complex modifications and operated at a high flux rate of 146 L/m2.h.MPa. Its outstanding performance highlights its potential for sustainable pollutant removal applications.
Assuntos
Fosfatos de Cálcio , Celulose , Quitosana , Nanocompostos , Águas Residuárias , Poluentes Químicos da Água , Nanocompostos/química , Águas Residuárias/química , Quitosana/química , Poluentes Químicos da Água/química , Celulose/química , Fosfatos de Cálcio/química , Adsorção , Metais Pesados/química , Eliminação de Resíduos Líquidos/métodos , Purificação da Água/métodos , Vermelho Congo/químicaRESUMO
Sudden jump of transmembrane pressure (TMP) in membrane bioreactors (MBRs), associated with abrupt aggravation of membrane fouling, limits practical applications of MBRs and calls for effective mitigation strategies. While the TMP jump is generally related to the bacterial activity of biocakes, the mechanisms underlying the TMP jump remain unclear. Herein, we conducted various backwash protocols with different nutrient (e.g., nitrate and sodium acetate) loadings on fouled membranes in MBRs to reveal the critical role of bacterial activity of biocakes for the TMP jump. The filtration tests showed a lower TMP jump rate for the membrane backwashed with a nutrient solution (a mixture of 180 mg/L NaNO3 and 200 mg/L NaAc, averaged at 1.40 kPa/d) than that backwashed with tap water (averaged at 3.56 kPa/d), implying that TMP jump could be efficiently mitigated by providing sufficient nutrients to biocake bacteria. The characterization of biocakes showed that high-nutrient solution backwash considerably increased bacterial viability and activity, while considerably reducing biomolecule accumulation on membranes. The keystone taxa (e.g., g_Aeromonas and o_Chitinophagaceae) in the network of nutrient-enriched biocake communities were involved in nitrate reduction and biomolecule degradation. Ecological null model analyses revealed that the deterministic manner mainly shaped biocake communities with high-nutrient availability. Overall, this study highlights the significance of the bacterial activity of biocakes for TMP development and provides potential alternatives for controlling membrane fouling.
Assuntos
Reatores Biológicos , Membranas Artificiais , Pressão , Filtração , Bactérias/metabolismoRESUMO
Rural water systems in Africa have room to improve water quality monitoring. However, the most cost-effective approach for microbial water testing remains uncertain. This study compared the cost per E. coli test (membrane filtration) of four approaches representing different levels of centralization: (i) one centralized laboratory serving all water systems, (ii) a mobile laboratory serving all systems, (iii) multiple semi-centralized laboratories serving clusters of systems, and (iv) decentralized analysis at each system. We employed Monte Carlo analyses to model the costs of these approaches in three real-world contexts in Ghana and Uganda and in hypothetical simulations capturing various conditions across rural Africa. Centralized testing was the lowest cost in two real-world settings and the widest variety of simulations, especially those with water systems close to a central laboratory (<36 km). Semi-centralized testing was the lowest cost in one real-world setting and in simulations with clustered water systems and intermediate sampling frequencies (1-2 monthly samples per system). The mobile lab was the lowest cost in the fewest simulations, requiring few systems and infrequent sampling. Decentralized testing was cost-effective for remote systems and frequent sampling, but only if sampling did not require a dedicated vehicle. Alternative low-cost testing methods could make decentralized testing more competitive.
Assuntos
Monitoramento Ambiental , Qualidade da Água , Monitoramento Ambiental/métodos , Análise Custo-Benefício , População Rural , Abastecimento de Água , África , Método de Monte Carlo , Uganda , Escherichia coli , GanaRESUMO
Infant formulas (IFs), the sole adequate substitute to human milk, undergo several thermal treatments during production that can damage milk proteins and promote the formation of Maillard reaction products, modifying nutritional and sensory properties. The aim of this study was to determine the impact of a minimally processing route based on membrane filtration associated with different levels of heat treatment, on the odor, taste, texture and color attributes of IFs, then to compare with those of commercial milks. Three experimental IFs (produced with membrane filtration associated with low - T-, medium - T+, or high thermal treatments - T+++) were evaluated. Triangular tests conducted with a panel of 50 adults highlighted clear disparities between all the IFs. The same panel applied the Check-All-That-Apply method to evaluate the IFs: the range of variability between T- and T+++ was similar to that between the 2 commercial IFs, and the sensory characteristics of the experimental IFs were not far from the commercial brands for flavor and texture attributes. Analysis performed on the citation frequencies for each descriptor differentiated T-/T+ from T+++, but all the experimental IFs were described with positive sensory characteristics, unlike one commercial IF. Volatile organic compounds (VOCs) content of IFs with low and high thermal treatments were analyzed. Forty VOCs were identified by gas chromatography-mass spectrometry. T- contained a higher quantity of VOCs than T+++, except for benzaldehyde (Maillard reaction product), and aldehydes (oxidation-related products) were the most represented compounds. In conclusion, the processing was associated with sensory differences among IFs, but no marked difference in flavors was found according to CATA and physicochemical analysis. Additionally, no unpleasant sensory descriptors were noted. This shows that the minimally processed route leads to IFs that could fit well within the market from a sensory point of view.
RESUMO
Developing eco-friendly, cost-effective, and efficient methods for treating water pollutants has become paramount in recent years. Biopolyelectrolytes (BPEs), comprising natural polymers like chitosan, alginate, and cellulose, have emerged as versatile tools in this pursuit. This review offers a comprehensive exploration of the diverse roles of BPEs in combating water contamination, spanning coagulation-flocculation, adsorption, and filtration membrane techniques. With ionizable functional groups, BPEs exhibit promise in removing heavy metals, dyes, and various pollutants. Studies showcase the efficacy of chitosan, alginate, and pectin in achieving notable removal rates. BPEs efficiently adsorb heavy metal ions, dyes, and pesticides, leveraging robust adsorption capacity and exceptional mechanical properties. Furthermore, BPEs play a pivotal role in filtration membrane techniques, offering efficient separation systems with high removal rates and low energy consumption. Despite challenges related to production costs and property variability, their environmentally friendly, biodegradable, renewable, and recyclable nature positions BPEs as compelling candidates for sustainable water treatment technologies. This review delves deeper into BPEs' modification and integration with other materials; these natural polymers hold substantial promise in revolutionizing the landscape of water treatment technologies, offering eco-conscious solutions to address the pressing global issue of water pollution.
Assuntos
Águas Residuárias , Purificação da Água , Purificação da Água/métodos , Águas Residuárias/química , Poluentes Químicos da Água/química , Poluentes Químicos da Água/isolamento & purificação , Quitosana/química , Adsorção , Metais Pesados/química , Metais Pesados/isolamento & purificação , Filtração/métodosRESUMO
R-phycoerythrin (R-PE) is the most abundant, naturally occurring phycobiliproteins found in red algae. The spectroscopic and structural properties of phycobiliproteins exhibit unique absorption characteristics with two significant absorption maxima at 498 and 565 nm, indicating two different chromophores of R-PE, phycourobilin and phycoerythrobilin respectively. This study aimed to clarify how the stability of R-PE purified from F. lumbricalis was affected by different purification strategies. Crude extracts were compared to R-PE purified by i) microfiltration, ii) ultrafiltration, and iii) multi-step ammonium sulphate precipitation followed by dialysis. The stability of the different R-PE preparations was evaluated with respect to pH (2, 4, 6, 7, 8, 10 and 12) and temperature (20, 40, 60, 80 and 100 °C). The absorbance spectra indicated higher stability of phycourobilin as compared to phycoerythrobilin for heat and pH stability in the samples. All preparations of R-PE showed heat stability till 40 °C from the findings of color, concentration of R-PE and fluorescence emission. The crude extract showed stability from pH 6 to 8, whereas R-PE purified by ultrafiltration and multi-step ammonium sulphate precipitation were both stable from pH 4 to 8 and R-PE purified by microfiltration exhibited stability from pH 4 to 10 from the results of color, SDS-PAGE, and concentration of R-PE. At pH 2, the color changed to violet whereas a yellow color was observed at pH 12 in the samples along with the precipitation of the protein.
Assuntos
Ficoeritrina , Rodófitas , Ficoeritrina/química , Ficoeritrina/isolamento & purificação , Concentração de Íons de Hidrogênio , Rodófitas/química , Ultrafiltração/métodos , Estabilidade Proteica , Precipitação Química , Sulfato de Amônio/química , Temperatura Alta , TemperaturaRESUMO
Human breast milk promotes maturation of the infant gastrointestinal barrier, including the promotion of mucus production. In the quest to produce next generation infant milk formula (IMF), we have produced IMF by membrane filtration (MEM-IMF). With a higher quantity of native whey protein, MEM-IMF more closely mimics human breast milk than IMF produced using conventional heat treatment (HT-IMF). After a 4-week dietary intervention in young pigs, animals fed a MEM-IMF diet had a higher number of goblet cells, acidic mucus and mucin-2 in the jejunum compared to pigs fed HT-IMF (P < 0.05). In the duodenum, MEM-IMF fed pigs had increased trypsin activity in the gut lumen, increased mRNA transcript levels of claudin 1 in the mucosal scrapings and increased lactase activity in brush border membrane vesicles than those pigs fed HT-IMF (P < 0.05). In conclusion, MEM-IMF is superior to HT-IMF in the promotion of mucus production in the young gut.
Assuntos
Filtração , Fórmulas Infantis , Muco , Animais , Fórmulas Infantis/química , Muco/metabolismo , Suínos , Proteínas do Soro do Leite/metabolismo , Intestino Delgado/metabolismo , Tripsina/metabolismo , Humanos , Células Caliciformes/metabolismo , Claudina-1/metabolismo , Claudina-1/genética , Lactase/metabolismo , Lactase/genética , Mucina-2/metabolismo , Mucina-2/genética , Mucosa Intestinal/metabolismo , Duodeno/metabolismo , Jejuno/metabolismo , RNA Mensageiro/metabolismo , RNA Mensageiro/genética , Proteínas do Leite/metabolismo , Proteínas do Leite/análiseRESUMO
Accurate quantification of nano-selenium (nSe) and other ionic Se species in aquatic environments is a prerequisite for reliable estimation of their potential hazards. In this study, a micropore membrane filtration-based method followed by ICP-MS analysis was proposed for the selective concentration and determination of nSe in the water column. Polyvinylidene fluoride (PVDF) and nylon micropore filtration membranes were proven to efficiently capture nSe under optimal conditions (retention > 91.0 ± 0.87%). At the same time, ionic selenite and selenate could escape from the membranes, realizing the isolation of nSe and ionic Se species. The interference of dissolved organic matter (DOM) during separation can be resolved by adding Ca(II) ions, which can induce the formation of DOM aggregates by cation bridging effects. nSe retained on PVDF membranes could be effectively eluted with FL-70 (a powerful alkaline surfactant) aqueous solutions (0.5%, m/v) while maintaining the original size and morphology. Although nSe trapped on nylon membranes could not be easily eluted, quantification can also be achieved after membrane digestion. Speciation of ionic selenite and selenate in the filtrate was further conducted with an anion exchange column by using HPLC coupled with ICP-MS. The developed method was used to analyze Se species in six real water samples. Spiking experiments showed that the recoveries of nSe ranged from 70.2 ± 2.7% to 85.8 ± 1.3% at a spike level of 0.2 µg/L, and the recoveries of Se(IV) and Se(VI) ranged from 83.6 ± 0.5% to 101 ± 1% at a spike level of 0.55 µg/L, verifying the feasibility for the analysis of environmental water samples. This work provides possibilities to investigate the transformation and potential risks of nSe in the environment.
RESUMO
The effects of the operating conditions, including the applied pressure, feed organic concentration, and recirculation flowrate along the TiO2-coated ceramic membrane, on the normalized membrane permeability and organic removal efficiency were systematically investigated by operating a photocatalytic membrane reactor (PMR). Response surface methodology (RSM) was conducted to better understand the interactive effect of operational conditions as well as their individual and combined effects to control membrane performance. Our results showed that the applied pressure and feed organic concentration, as single parameter, affected the normalized membrane permeability and organic removal efficiency more dominantly than the recirculation flowrate. The polynomial performance equations generated by RSM successfully predicted the membrane performance of the PMR. The responses to the normalized membrane permeability and organic removal efficiency with respect to the operational conditions were less sensitive to any combination of operational conditions than to their individual impacts. The combined effects of the operating conditions were less pronounced in promoting the catalytic performance of organic contaminants on the TiO2 surface. Our RSM analysis based on experimental observations designed by Box-Behnken Design (BBD) suggested that 1.3 bar of applied pressure, 44 mg/L of feed organic dye concentration and 0.8 L/min as recirculation flowrate as optimum conditions achieved more than 98% of organic removal efficiency and less than 5% of decline in normalized membrane permeability. This research shows that the RSM provides effective tool to optimize operational conditions to determine fouling rate and organic removal in PMR.
Assuntos
Cerâmica , Filtração , Membranas Artificiais , Titânio , Cerâmica/química , Filtração/métodos , Titânio/química , Catálise , Hidrodinâmica , Poluentes Químicos da Água/análise , Poluentes Químicos da Água/química , Purificação da Água/métodos , Eliminação de Resíduos Líquidos/métodos , PermeabilidadeRESUMO
Concerted efforts have been made in recent years to find solutions to water and wastewater treatment challenges and eliminate the difficulties associated with treatment methods. Various techniques are used to ensure the recycling and reuse of water resources. Owing to their excellent chemical, physical, and biological properties, nanomaterials play an important role when integrated into water/wastewater treatment technologies. Black phosphorus (BP) is a potential nanomaterial candidate for water and wastewater treatment, especially its monolayer 2D derivative called phosphorene. Phosphorene offers relative adjustability in its direct bandgap, high charge carrier mobility, and improved in-plane anisotropy compared to the most extensively studied 2D nanomaterials. In this study, we examined the physical and chemical characteristics and synthetic processes of BP and phosphorene. We provide an overview of the latest advancements in the main applications of BP and phosphorene in water/wastewater treatment, which are categorized as photocatalytic, adsorption, and membrane filtration processes. Additionally, we explore the existing difficulties in the integration of BP and phosphorene into water/wastewater treatment technologies and prospects for future research in this field. In summary, this review highlights the ongoing necessity for significant research efforts on the integration of BP and phosphorene in water and wastewater applications.
RESUMO
The various apple products industries produce a large amount of apple residue, which is easily fermented, causes environmental pollution, and its disposal cost is high, but is rich in nutrients, such as polyphenols. Polyphenols can be purified to realize high-value deep processing of apple pomace and to promote energy reuse of food waste. In this study, the highly selective purification of polyphenols was achieved by membrane filtration using prepared Metal-organic framework (MOF)-5/PES mixed matrix membranes with apple peels as raw material. The polyethersulfone mixed matrix membrane was loaded with MOF-5 by the phase inversion method, and their structural and physicochemical properties were characterized by scanning electron microscopy (SEM), and X-ray diffraction (XRD). Zeta potential and specific surface area of MOF-5 particles were measured, as well as the water contact angle and anti-fouling properties of the mixed matrix membrane were analyzed. It was confirmed that the membrane loaded with MOF-5 showed better hydrophilicity and mechanical properties compared with the pristine polyether sulfone membrane. Under practical conditions, the increased hydrophilicity could enhance the anti-fouling properties of membranes, which would improve the flux recovery ratio of membranes. In addition, the prepared MOF-5/PES mixed matrix membrane was applied to the purification of polyphenols, showing excellent purification performance of polyphenols. In particular, the purity of polyphenol after membrane filtration could reach 70.45% when the additional amount of MOF-5 was 10%. This research provides a method to prepare MOF-5/PES mixed matrix membranes, which effectively solves the problem of unstable and unsatisfactory purification effect of commercially available membranes, promotes the development of new materials in membrane science, and realizes high-value deep processing and comprehensive resource development of food waste using membrane filtration.
Assuntos
Filtração , Membranas Artificiais , Estruturas Metalorgânicas , Polímeros , Polifenóis , Sulfonas , Sulfonas/química , Polifenóis/isolamento & purificação , Polifenóis/análise , Polifenóis/química , Polímeros/química , Filtração/métodos , Estruturas Metalorgânicas/química , Malus/químicaRESUMO
In order to re-utilize the residual from the distillation of the Chinese wolfberry wine and reduce the environmental pollution, the residual is firstly filtered by the ceramic membrane of 50 nm, then the Cu (II) has transferred from the distillation is removed using the ion exchange resin, and the treated solution is recombined with the distilled liquor to make the Chinese wolfberry brandy and the comparison has conducted on the physicochemical properties, antioxidant activity and flavor compounds between the recombined brandy and the finished brandy. The results indicate that the Cu (II) was effectively removed by ceramic membrane combined with the D401 resin. Compared with finished brandy, the recombined brandy contains high contents of polysaccharides, phenols and flavonoids, thus contributing to the improvement of antioxidant capacity. The gas chromatography-ion mobility spectrometry (GC-IMS) reveals that 25 volatile compounds like esters and alcohols have identified in the brandy samples, and the differences are significant between the recombined and the finished brandy. In summary, the distilled residual from the Chinese wolfberry wine might be re-used after the appropriate treatment so as to reduce the discharge and environmental pollution.
RESUMO
This paper describes a new experimental configuration of extraction induced by emulsion breaking method to extract and determine Ni and Co in chocolate bars by graphite furnace atomic absorption spectrometry. At optimized conditions, the sample (0.08 g) was mixed with 4 mL of extractant solution (4% m/v Triton X-100 and 10% v/v HNO3) in a plastic syringe to form a solid-oil-water emulsion. Then, emulsion breaking was assisted by membrane filtration. The total extraction procedure took approximately 1 min, in opposition to 25 (centrifugation) and 50 min (heating). Extraction yields ranged from 94.8 to 114.3% for Co and from 85.9 to 108.4% for Ni. The limits of detection and quantification were, respectively, 24.73 and 82.45 µg Kg-1 for Co and 49.05 and 163.5 µg Kg-1 for Ni. Recoveries ranged from 92.1 (Ni) to 105.4% (Co).
RESUMO
Bottom-up production of active pharmaceutical ingredient (API) crystal suspensions offers advantages in surface property control and operational ease over top-down methods. However, downstream separation and concentration pose challenges. This proof-of-concept study explores membrane diafiltration as a comprehensive solution for downstream processing of API crystal suspensions produced via anti-solvent crystallization. It involves switching the residual solvent (N-methyl-2-pyrrolidone, NMP) with water, adjusting the excipient (d-α-Tocopherol polyethylene glycol 1000 succinate, TPGS) quantity, and enhancing API loading (solid concentration) in itraconazole crystal suspensions. NMP concentration was decreased from 9 wt% to below 0.05 wt% (in compliance with European Medicine Agency guidelines), while the TPGS concentration was decreased from 0.475 wt% to 0.07 wt%. This reduced the TPGS-to-itraconazole ratio from 1:2 to less than 1:50 and raised the itraconazole loading from 1 wt% to 35.6 wt%. Importantly, these changes did not adversely affect the itraconazole crystal stability in suspension. This study presents membrane diafiltration as a one-step solution to address downstream challenges in bottom-up API crystal suspension production. These findings contribute to optimizing pharmaceutical manufacturing processes and hold promise for advancing the development of long-acting API crystal suspensions via bottom-up production techniques at a commercial scale.
Assuntos
Itraconazol , Água , Itraconazol/química , Solventes/química , Propriedades de Superfície , Tecnologia , Suspensões , Solubilidade , Tamanho da PartículaRESUMO
The established benefits of ozone on microbial pathogen inactivation, natural organic matter degradation, and inorganic/organic contaminant oxidation have favored its application in drinking water treatment. However, viable bacteria are still present after the ozonation of raw water, bringing a potential risk to membrane filtration systems in terms of biofilm accumulation and fouling. In this study, we shed light on the role of the specific ozone dose (0.5 mg-O3/mg-C) in biofilm accumulation during long-term membrane ultrafiltration. Results demonstrated that ozonation transformed the molecular structure of influent dissolved organic matter (DOM), producing fractions that were highly bioavailable at a specific ozone dose of 0.5, which was inferred to be a turning point. With the increase of the specific ozone dose, the biofilm microbial consortium was substantially shifted, demonstrating a decrease in richness and diversity. Unexpectedly, the opportunistic pathogen Legionella was stimulated and occurred in approximately 40% relative abundance at the higher specific ozone dose of 1. Accordingly, the membrane filtration system with a specific ozone dose of 0.5 presented a lower biofilm thickness, a weaker fluorescence intensity, smaller concentrations of polysaccharides and proteins, and a lower Raman activity, leading to a lower hydraulic resistance, compared to that with a specific ozone dose of 1. Our findings highlight the interaction mechanism between molecular-level DOM composition, biofilm microbial consortium, and membrane filtration performance, which provides an in-depth understanding of the impact of ozonation on biofilm accumulation.
Assuntos
Ozônio , Purificação da Água , Membranas Artificiais , Ultrafiltração , BiofilmesRESUMO
Recently, gravity-driven membrane (GDM) filtration has been adopted as an alternative solution for decentralized wastewater treatment due to easy installation and maintenance, reduced energy and operation cost, and low global warming impact. This study investigated the influence of microplastic size (0.5-0.8 µm and 40-48 µm) and amount (0.1 and 0.2 g/L) on the membrane performance and microbial community in GDM systems for primary municipal wastewater treatment. The results showed that dosing microplastics in the GDM systems led to 9-54% lower permeate flux than that in the control. This was attributed to more cake formation (up to 6.4-fold) with more deposition of extracellular polymeric substances (EPS, up to 1.5-fold) and divalent cations (up to 2.1-fold) in the presence of microplastics, especially with increasing microplastic amount or size. However, the dosed microplastics promoted formation of heterogeneous cake layers with more porous nature, possibly because microplastics created void space in the cake and also tended to bind with divalent cations to reduce EPS-divalent cations interactions. In the biofilm of the GDM systems, the presence of microplastics could lower the number of total species, but it greatly enhanced the abundance of certain dominant prokaryotes (Phenylobacterium haematophilum, Planctomycetota bacterium, and Flavobacteriales bacterium), eukaryotes (Stylonychia lemnae, Halteria grandinella, and Paramicrosporidium saccamoebae), and virus (phylum Nucleocytoviricota), as well as amino acid and lipid metabolic functions. Especially, the small-size microplastics at a higher dosed amount led to more variations of microbial community structure and microbial metabolic functions.