Interactions of coinage metal nanoclusters with low-molecular-weight biocompounds.

Nowadays, coinage metal nanoclusters (NCs) are largely presented in diagnostics, bioimaging, and biocatalysis due to their high biocompatibility, chemical stability, and sensitivity to surrounding biomolecules. Silver and gold NCs are usually characterized by intense luminescence and photostability, which is in great demand in the detection of organic compounds, ions, pH, temperature, etc. The experimental synthesis of metal NCs often occurs on biopolymer templates, mostly DNA and proteins. However, this review mainly focuses on the interactions with small biomolecules (SBMs) of a molecular weight less than 1000 Da: amino acids, nucleobases, thiolates, oligopeptides, etc. Such molecules can serve as the templates for an eco-friendly facile one-pot synthesis of biocompatible luminescent NCs. The latter aspect makes NCs suitable for diagnostics and intracellular bioimaging. Another important aspect is the interaction of clusters with biomarkers, which is largely exploited by nanosensors: biomarker detection often occurs through either fluorescence emission "turn-on" or "turn-off" mechanisms. Moreover, as theoretical studies show, electronic absorption spectra and Raman spectra of the metal-organic complexes allow efficient detection of various analytes. In this regard, both theoretical and experimental studies of SBM complexes with metal NCs are in great demand. Therefore, this review aims to summarize up-to-date studies on the interaction of small biomolecules with coinage metal NCs from both theoretical and experimental viewpoints.

Single-Molecule Mechanoresistivity by Intermetallic Bonding.

The metal-electrode interface is key to unlocking emergent behaviour in all organic electrified systems, from battery technology to molecular electronics. In the latter, interfacial engineering has enabled efficient transport, higher device stability, and novel functionality. Mechanoresistivity - the change in electrical behaviour in response to a mechanical stimulus and a pathway to extremely sensitive force sensors - is amongst the most studied phenomena in molecular electronics, and the molecule-electrode interface plays a pivotal role in its emergence, reproducibility, and magnitude. In this contribution, we show that organometallic molecular wires incorporating a Pt(II) cation show mechanoresistive behaviour of exceptional magnitude, with conductance modulations of more than three orders of magnitude upon compression by as little as 1 nm. We synthesised series of cyclometalated Pt(II) molecular wires, and used scanning tunnelling microscopy - break junction techniques to characterise their electromechanical behaviour. Mechanoresistivity arises from an interaction between the Pt(II) cation and the Au electrode triggered by mechanical compression of the single-molecule device, and theoretical modelling confirms this hypothesis. Our study provides a new tool for the design of functional molecular wires by exploiting previously unreported ion-metal interactions in single-molecule devices, and develops a new framework for the development of mechanoresistive molecular junctions.

Transcriptomics pave the way into mechanisms of cobalt and nickel toxicity: Nrf2-mediated cellular responses in liver carcinoma cells.

Cobalt (Co) and Nickel (Ni) are used nowadays in various industrial applications like lithium-ion batteries, raising concerns about their environmental release and public health threats. Both metals are potentially carcinogenic and may cause neurological and cardiovascular dysfunctions, though underlying toxicity mechanisms have to be further elucidated. This study employs untargeted transcriptomics to analyze downstream cellular effects of individual and combined Co and Ni toxicity in human liver carcinoma cells (HepG2). The results reveal a synergistic effect of Co and Ni, leading to significantly higher number of differentially expressed genes (DEGs) compared to individual exposure. There was a clear enrichment of Nrf2 regulated genes linked to pathways such as glycolysis, iron and glutathione metabolism, and sphingolipid metabolism, confirmed by targeted analysis. Co and Ni exposure alone and combined caused nuclear Nrf2 translocation, while only combined exposure significantly affects iron and glutathione metabolism, evidenced by upregulation of HMOX-1 and iron storage protein FTL. Both metals impact sphingolipid metabolism, increasing dihydroceramide levels and decreasing ceramides, sphingosine and lactosylceramides, along with diacylglycerol accumulation. By combining transcriptomics and analytical methods, this study provides valuable insights into molecular mechanisms of Co and Ni toxicity, paving the way for further understanding of metal stress.

Antiferromagnetic Interactions through the Thirteen Å Metal-Metal Distances in Heterometallic One-Dimensional Chains.

A heterometallic and paramagnetic one-dimensional aligned chain in -Rh(+2)-Rh(+2)- Pt(+2)-Ni(+2)-Pt(+2)- with direct metal-metal bonds was obtained via HOMO-LUMO interactions at the σ* (dz2) orbital between [Rh2(O2CCH3)4] and [Pt2Ni(piam)4(NH3)4] (piam=pivalamidate). The one-dimensional chains had straight backbones attributed to face-to-face stacking of each complex, and the Ni atoms were separated by approximately 13 Šfrom four different metals. Each Ni atom had two unpaired electrons in the d-orbitals, which strongly exchanged with J=-37.9 cm-1 through the diamagnetic -Pt-Rh-Rh-Pt- bonds.

Surface-Enriched Room-Temperature Liquid Bismuth for Catalytic CO2 Reduction.

Bismuth-based electrocatalysts are effective for carbon dioxide (CO2) reduction to formate. However, at room temperature, these materials are only available in solid state, which inevitably suffers from surface deactivation, declining current densities, and Faradaic efficiencies. Here, the formation of a liquid bismuth catalyst on the liquid gallium surface at ambient conditions is shown as its exceptional performance in the electrochemical reduction of CO2 (i.e., CO2RR). By doping a trace amount of bismuth (740 ppm atomic) in gallium liquid metal, a surface enrichment of bismuth by over 400 times (30 at%) in liquid state is obtained without atomic aggregation, achieving 98% Faradic efficiency for CO2 conversion to formate over 80 h. Ab initio molecular simulations and density functional theory calculations reveal that bismuth atoms in the liquid state are the most energetically favorable sites for the CO2RR intermediates, superior to solid Bi-sites, as well as joint GaBi-sites. This study opens an avenue for fabricating high-performing liquid-state metallic catalysts that cannot be reached by elementary metals under electrocatalytic conditions.

Rational Design and Precise Synthesis of Single-Atom Alloy Catalysts for the Selective Hydrogenation of Nitroarenes.

Single-atom alloys (SAAs) have gained increasing prominence in the field of selective hydrogenation reactions due to their uniform distribution of active sites and the unique host-guest metal interactions. Herein, 15 SAAs are constructed to comprehensively elucidate the relationship between host-guest metal interaction and catalytic performance in the selective hydrogenation of 4-nitrostyrene (4-NS) by density functional theory (DFT) calculations. The results demonstrate that the SAAs with strong host-guest metal interactions exhibit a preference for N─O bond cleavage, and the reaction energy barrier of the hydrogenation process is primarily influenced by the host metal. Among them, Ir1Ni SAA stands out as the prime catalyst candidate, showcasing exceptional activity and selectivity. Furthermore, the Ir1Ni SAA is subsequently prepared through precise synthesis techniques and evaluated in the selective hydrogenation of 4-NS to 4-aminostyrene (4-AS). As anticipated, the Ir1Ni SAA demonstrates extraordinary catalytic performance (yield > 96%). In situ FT-IR experiments and DFT calculations further confirmed that the unique host-guest metal interaction at the Ir-Ni interface site of Ir1Ni SAA endows it with excellent 4-NS selective hydrogenation ability. This work provides valuable insights into enhancing the performance of SAAs catalysts in selective hydrogenation reactions by modulating the host-guest metal interactions.

Heavy metal tolerance and accumulation in the Brassica species (Brassica chinensis var. parachinensis and Brassica rapa L.): A pot experiment.

This study delves into the heavy metal tolerance and accumulation capabilities of Brassica chinensis var. parachinensis (B. chinensis) and Brassica rapa L. (B. rapa) in a pot experiment, specifically focusing on cadmium (Cd), chromium (Cr) and lead (Pb). Agricultural topsoils were spiked with varying concentrations of these heavy metals (0 mg/kg, 75 mg/kg, 150 mg/kg, 225 mg/kg and 300 mg/kg) for each element. The experiment involved cultivating 15 pots each of B. chinensis and B. rapa over 60 days. Results indicated that both Brassica species experienced delayed germination, with B. chinensis exhibiting a significant drop in germination percentage to 53 % at the highest concentration (300 mg/kg), while B. rapa showed a tendency for an increased germination percentage of up to 80 % at elevated metal concentrations; however, these differences were not statistically significant. Both B. chinensis and B. rapa demonstrated a stable decline in growth rate from 0.05 cm/day to 0.04 cm/day with increasing heavy metal concentrations, and the he reduction in relative growth rate was significant at the highest concentration compared to the control. The stress tolerance index revealed a significant decrease in plant heights for B. chinensis, in contrast to the stable performance of B. rapa, showcasing the tolerance of B. rapa to toxic conditions. Despite insignificant differences in fresh biomass due to metal treatments, B. chinensis consistently yielded higher biomass, yet it had a lower edible index due to its higher root biomass. Leaf areas increased significantly in both species at higher soil treatments, while root lengths remained unchanged, suggesting their resilience to elevated heavy metal concentrations. Analysis of plant tissues (leaves, stems and roots) using ICP-OES revealed that B. rapa accumulated the highest Cd concentration (864 mg/kg), whereas B. chinensis accumulated the highest Pb concentration (953 mg/kg) in root parts. Both species significantly accumulated Cr in roots, demonstrating a sequestration mechanism. These findings suggest that both species, particularly, B. rapa possess strong tolerance and accumulation capabilities for non-essential heavy metals, making them potential hyperaccumulators for green remediation techniques in toxic soil environments. Understanding the molecular mechanisms driving these responses and validating phytoremediation potential in real-world scenarios is essential for developing sustainable soil management practices.

Single is not combined: The role of Co and Ni bioavailability on toxicity mechanisms in liver and brain cells.

The two trace elements cobalt (Co) and nickel (Ni) are widely distributed in the environment due to the increasing industrial application, for example in lithium-ion batteries. Both metals are known to cause detrimental health impacts to humans when overexposed and both are supposed to be a risk factor for various diseases. The individual toxicity of Co and Ni has been partially investigated, however the underlying mechanisms, as well as the interactions of both remain unknown. In this study, we focused on the treatment of liver carcinoma (HepG2) and astrocytoma (CCF-STTG1) cells as a model for the target sites of these two metals. We investigated their effects in single and combined exposure on cell survival, cell death mechanisms, bioavailability, and the induction of oxidative stress. The combination of CoCl2 and NiCl2 resulted in higher Co levels with subsequent decreased amount of Ni compared to the individual treatment. Only CoCl2 and the combination of both metals led to RONS induction and increased GSSG formation, while apoptosis and necrosis seem to be involved in the cell death mechanisms of both CoCl2 and NiCl2. Collectively, this study demonstrates cell-type specific toxicity, with HepG2 representing the more sensitive cell line. Importantly, combined exposure to CoCl2 and NiCl2 is more toxic than single exposure, which may originate partly from the respective cellular Co and Ni content. Our data imply that the major mechanism of joint toxicity is associated with oxidative stress. More studies are needed to assess toxicity after combined exposure to elements such as Co and Ni to advance an improved hazard prediction for less artificial and more real-life exposure scenarios.

Early-stage growth and elemental composition patterns of Brassica napus L. in response to Cd-Zn contamination.

Soil contamination caused by the presence of Cd and the excess amount of Zn is a widespread concern in agricultural areas, posing significant risks to the growth and development of crops. In this paper, the early-stage development and metal (Cd and Zn) accumulation potential of rapeseed (Brassica napus L.) grown under different metal application schemes were assessed by determining radicle and hypocotyl length and the micro- and macro elemental composition of plantlets after 24, 72, and 120 h. The results indicated that the single and co-application of Cd and Zn significantly reduced the radicle and hypocotyl lengths. Accumulation intensity for Cd and Zn was affected by Cd and the combination of Cd and Zn in the solution, respectively. In addition, both metals significantly influenced the tissue Mn and had a minor effect on Cu and Fe concentrations. Both Cd and Zn significantly affected macro element concentrations by decreasing tissue Ca and influencing K and Mg concentrations in a dose- and exposure time-dependent manner. These findings specify the short-term and support the long-term use of rapeseed in remediation processes. However, interactions of metals are crucial in determining the concentration patterns in tissues, which deserves more attention in future investigations.

Accessing Ta/Cu Architectures via Metal-Metal Salt Metatheses: Heterobimetallic C-H Bond Activation Affords µ-Hydrides.

We employ a metal-metal salt metathesis strategy to access low-valent tantalum-copper heterometallic architectures (Ta-µ2 -H2 -Cu and Ta-µ3 -H2 -Cu3 ) that emulate structural elements proposed for surface alloyed nanomaterials. Whereas cluster assembly with carbonylmetalates is well precedented, the use of the corresponding polyarene transition metal anions is underexplored, despite recognition of these highly reactive fragments as storable sources of atomic Mn- . Our application of this strategy provides structurally unique early-late bimetallic species. These complexes incorporate bridging hydride ligands during their syntheses, the origin of which is elucidated via detailed isotopic labelling studies. Modification of ancillary ligand sterics and electronics alters the mechanism of bimetallic assembly; a trinuclear complex resulting from dinuclear C-H activation is demonstrated as an intermediate en route to formation of the bimetallic. Further validating the promise of this rational, bottom-up approach, a unique tetranuclear species was synthesized, featuring a Ta centre bearing three Ta-Cu interactions.

High-Spin and Reactive Fe13 Cluster with Exposed Metal Sites.

Atomically defined large metal clusters have applications in new reaction development and preparation of materials with tailored properties. Expanding the synthetic toolbox for reactive high nuclearity metal complexes, we report a new class of Fe clusters, Tp*4 W4 Fe13 S12 , displaying a Fe13 core with M-M bonds that has precedent only in main group and late metal chemistry. M13 clusters with closed shell electron configurations can show significant stability and have been classified as superatoms. In contrast, Tp*4 W4 Fe13 S12 displays a large spin ground state of S=13. This compound performs small molecule activations involving the transfer of up to 12 electrons resulting in significant cluster rearrangements.

Partial Deoxygenative CO Homocoupling by a Diiron Complex.

One route to address climate change is converting carbon dioxide to synthetic carbon-neutral fuels. Whereas carbon dioxide to CO conversion has precedent in homo- and heterogeneous catalysis, deoxygenative coupling of CO to products with C-C bonds-as in liquid fuels-remains challenging. Here, we report coupling of two CO molecules by a diiron complex. Reduction of Fe2 (CO)2 L (2), where L2- is a bis(ß-diketiminate) cyclophane, gives [K(THF)5 ][Fe2 (CO)2 L] (3), which undergoes silylation to Fe2 (CO)(COSiMe3 )L (4). Subsequent C-OSiMe3 bond cleavage and C=C bond formation occurs upon reduction of 4, yielding Fe2 (µ-CCO)L. CO derived ligands in this series mediate weak exchange interactions with the ketenylidene affording the smallest J value, with changes to local metal ion spin states and coupling schemes (ferro- vs. antiferromagnetism) based on DFT calculations, Mössbauer and EPR spectroscopy. Finally, reaction of 5 with KEt3 BH or methanol releases the C2 O2- ligand with retention of the diiron core.

Association between soil organic carbon and calcium in acidic grassland soils from Point Reyes National Seashore, CA.

Organo-mineral and organo-metal associations play an important role in the retention and accumulation of soil organic carbon (SOC). Recent studies have demonstrated a positive correlation between calcium (Ca) and SOC content in a range of soil types. However, most of these studies have focused on soils that contain calcium carbonate (pH > 6). To assess the importance of Ca-SOC associations in lower pH soils, we investigated their physical and chemical interaction in the grassland soils of Point Reyes National Seashore (CA, USA) at a range of spatial scales. Multivariate analyses of our bulk soil characterisation dataset showed a strong correlation between exchangeable Ca (CaExch; 5-8.3 c.molc kg-1) and SOC (0.6-4%) content. Additionally, linear combination fitting (LCF) of bulk Ca K-edge X-ray absorption near-edge structure (XANES) spectra revealed that Ca was predominantly associated with organic carbon across all samples. Scanning transmission X-ray microscopy near-edge X-ray absorption fine structure spectroscopy (STXM C/Ca NEXAFS) showed that Ca had a strong spatial correlation with C at the microscale. The STXM C NEXAFS K-edge spectra indicated that SOC had a higher abundance of aromatic/olefinic and phenolic C functional groups when associated with Ca, relative to C associated with Fe. In regions of high Ca-C association, the STXM C NEXAFS spectra were similar to the spectrum from lignin, with moderate changes in peak intensities and positions that are consistent with oxidative C transformation. Through this association, Ca thus seems to be preferentially associated with plant-like organic matter that has undergone some oxidative transformation, at depth in acidic grassland soils of California. Our study highlights the importance of Ca-SOC complexation in acidic grassland soils and provides a conceptual model of its contribution to SOC preservation, a research area that has previously been unexplored. Supplementary Information: The online version contains supplementary material available at 10.1007/s10533-023-01059-2.

Coordination Behavior of the Tellurium Incorporated Mercuraazametallamacrocycle and Investigation of d10 ⋠⋠⋠d10 Interactions between Closed Shell (Ag+ Hg2+ ) Metal Ions.

Herein, a new tellurium and mercury containing mercuraazametallamacrocycle has been prepared via (2+2) condensation of bis(o-aminophenyl)telluride and bis(o-formylphenyl)mercury(II). The isolated bright yellow solid of mercuraazametallamacrocycle has adopted unsymmetrical figure-of-eight conformation in the crystal structure. To study the metallophilic interactions between closed shell metal ions, the macrocyclic ligand has been treated with two equiv. of AgOTf (OTf=trifluoromethansulfonate) and AgBF4 , which afforded greenish-yellow bimetallic silver complexes. The isolated silver complexes displayed intramolecular Hg⋅⋅⋅Ag, Te⋅⋅⋅Ag interactions as well as intermolecular Hg⋅⋅⋅Hg interactions and formed an extended 1D molecular chain by directing six atoms to interact as TeII ⋅⋅⋅AgI ⋅⋅⋅HgII ⋅⋅⋅HgII ⋅⋅⋅AgI ⋅⋅⋅TeII in a non linear fashion. The Hg⋅⋅⋅Ag, Te⋅⋅⋅Ag interactions have also been studied in solution by 199 Hg, 125 Te NMR spectroscopy, absorption, and emission spectroscopy. In DFT calculations, the Atom in Molecule (AIM) analysis, non-covalent interactions (NCI), natural bonding orbital (NBO) analysis strongly supported for experimental evidences and revealed that the intermolecular Hg⋅⋅⋅Hg interaction is stronger than the intramolecular Hg⋅⋅⋅Ag interactions.

Coordination versus Insertion: On the Interaction of 5 d-Transition Metal Carbonyl Clusters with Silver(I).

The title silver(I) complex salts [Ag{Re2 (CO)10 }{Re(CO)5 }2 ]+ [Al(ORF )4 ]- (AgRe4 ; ORF =-OC(CF3 )3 ) and [Ag{Ir4 (CO)12 }2 ]+ [Al(ORF )4 ]- (AgIr8 ) form upon reaction of Ag+ [Al(ORF )4 ]- and the transition metal carbonyls (TMCs) Re2 (CO)10 and Ir4 (CO)12 respectively. The solid-state structure of the AgRe4 cluster shows an unexpected asymmetric coordination motif, wherein the silver(I) cation has inserted into the Re-Re bond of one Re2 (CO)10 moiety, while the other dirhenium carbonyl coordinates only over one metal atom towards the silver(I) cation. The AgIr8 cluster is formed by the edge-on coordination of two Ir4 tetrahedra and the silver cation in a D2 symmetric fashion with a torsion angle of 46.5°. QTAIM analysis shows bond paths between the silver atom and the nearby metal atoms in all cases, whereas only the non-inserted Re2 (CO)10 moiety shows additional bond paths between the carbonyl ligands and the silver cation. In addition, the insertion of the Ag+ cation into the Re-Re bond in Re2 (CO)10 removes the bond path between the two rhenium atoms. The EDA-NOCV analysis suggests an increase of the interaction energy between the silver(I) cation and the respective metal carbonyls from the metal centered transition metal carbonyl (TMC) donors W(CO)6

Metal Alloys-Structured Electrocatalysts: Metal-Metal Interactions, Coordination Microenvironments, and Structural Property-Reactivity Relationships.

Metal alloys-structured electrocatalysts (MAECs) have made essential contributions to accelerating the practical applications of electrocatalytic devices in renewable energy systems. However, due to the complex atomic structures, varied electronic states, and abundant supports, precisely decoding the metal-metal interactions and structure-activity relationships of MAECs still confronts great challenges, which is critical to direct the future engineering and optimization of MAECs. Here, this timely review comprehensively summarizes the latest advances in creating the MAECs, including the metal-metal interactions, coordination microenvironments, and structure-activity relationships. First, the fundamental classification, design, characterization, and structural reconstruction of MAECs are outlined. Then, the electrocatalytic merits and modulation strategies of recent breakthroughs for noble and non-noble metal-structured MAECs are thoroughly discussed, such as solid solution alloys, intermetallic alloys, and single-atom alloys. Particularly, unique insights into the bond interactions, theoretical understanding, and operando techniques for mechanism disclosure are given. Thereafter, the current states of diverse MAECs with a unique focus on structural property-reactivity relationships, reaction pathways, and performance comparisons are discussed. Finally, the future challenges and perspectives for MAECs are systematically discussed. It is believed that this comprehensive review can offer a substantial impact on stimulating the widespread utilization of metal alloys-structured materials in electrocatalysis.

Zinc Supply Affects Cadmium Uptake and Translocation in the Hyperaccumulator Sedum Plumbizincicola as Evidenced by Isotope Fractionation.

This study employs stable isotope analysis to investigate the mechanisms of cadmium (Cd) and zinc (Zn) interaction in the metal hyperaccumulating plant species Sedum plumbizincicola. To this end, the Cd and Zn isotope compositions of root, stem, leaf, and xylem sap samples were determined during metal uptake and translocation at different Cd and Zn concentrations. The enrichment of light isotopes of both elements in plants during uptake was less pronounced at low metal supply levels, likely reflecting the switch from a low-affinity to a high-affinity transport system at lower levels of external metal supply. The lower δ114/110Cd values of xylem sap when treated with a metabolic inhibitor decreasing the active Cd uptake further supports the preference of heavier Cd isotopes during high-affinity transport. The Δ66Znplant-initial solution or Δ66Znplant-final solution values were similar at different Cd concentrations, indicating negligible interaction of Cd in the Zn uptake process. However, decreasing Zn supply levels significantly increased the enrichment of light Cd isotopes in plants (Δ114/110Cd = -0.08‰) in low-Cd treatments but reduced the enrichment of light Cd isotopes in plants (Δ114/110Cd = 0.08‰) under high Cd conditions. A systematic enrichment of heavy Cd and light Zn isotopes was found in root-to-shoot translocation of the metals. The Cd concentrations of the growth solutions thereby had no significant impact on Zn isotope fractionation during root-to-shoot translocation. However, the Δ114/110Cdtranslocation values hint at possible competition between Cd and Zn for transporters during root-to-shoot transfer and this may impact the transport pathway of Cd. The stable isotope data demonstrate that the interactions between the two metals influenced the uptake and transport mechanisms of Cd in S. plumbizincicola but had little effect on those of Zn.

Asymmetrical Platinum and Rhodium Dinuclear Complex Strongly Bound to Filled d z 2 ${{_{{\rm z}{

Heterometallic extended metal atom chains (EMACs) aligned with three types of metal were rationally synthesized by forming unbridged metal-metal bonds based on the interactions between highest occupied and lowest unoccupied molecular orbitals at the d z 2 ${{_{{\rm z}{^{2}}}}}$ orbital. These chains form pentanuclear structures aligned as Rh-Pt-M-Pt-Rh with relatively large formation constants of 5.0×1013  M-2 for M=Pt and 6.3×1011  M-2 for M=Pd, while retaining their backbones in solution. In the case of M=Cu, the original Cu(+2) atoms were reduced to Cu(+1) during the synthetic process. Cu(+1) has an unprecedented trigonal bipyramidal coordination geometry. The reported synthesis based on asymmetrical dinuclear complexes provides a guideline for the synthesis of hetero-EMACs to allow several analogs through judicious combinations realized by tuning the number of metal nuclei and metal species.