Modeling the mechanosensitive collective migration of cells on the surface and the interior of morphing soft tissues.

Cellular contractility, migration, and extracellular matrix (ECM) mechanics are critical for a wide range of biological processes including embryonic development, wound healing, tissue morphogenesis, and regeneration. Even though the distinct response of cells near the tissue periphery has been previously observed in cell-laden microtissues, including faster kinetics and more prominent cell-ECM interactions, there are currently no models that can fully combine coupled surface and bulk mechanics and kinetics to recapitulate the morphogenic response of these constructs. Mailand et al. (Biophys J 117(5):975-986, 2019) had shown the importance of active elastocapillarity in cell-laden microtissues, but modeling the distinct mechanosensitive migration of cells on the periphery and the interior of highly deforming tissues has not been possible thus far, especially in the presence of active elastocapillary effects. This paper presents a framework for understanding the interplay between cellular contractility, migration, and ECM mechanics in dynamically morphing soft tissues accounting for distinct cellular responses in the bulk and the surface of tissues. The major novelty of this approach is that it enables modeling the distinct migratory and contractile response of cells residing on the tissue surface and the bulk, where concurrently the morphing soft tissues undergo large deformations driven by cell contractility. Additionally, the simulation results capture the changes in shape and cell concentration for wounded and intact microtissues, enabling the interpretation of experimental data. The numerical procedure that accounts for mechanosensitive stress generation, large deformations, diffusive migration in the bulk and a distinct mechanism for diffusive migration on deforming surfaces is inspired from recent work on bulk and surface poroelasticity of hydrogels involving elastocapillary effects, but in this work, a two-field weak form is proposed and is able to alleviate numerical instabilities that were observed in the original method that utilized a three-field mixed finite element formulation.

The effects of simvastatin-loaded nanoliposomes on human multilineage liver fibrosis microtissue.

In this in vitro study, for the first time, we evaluate the effects of simvastatin-loaded liposome nanoparticles (SIM-LipoNPs) treatment on fibrosis-induced liver microtissues, as simvastatin (SIM) has shown potential benefits in the non-alcoholic fatty liver disease process. We developed multicellular liver microtissues composed of hepatic stellate cells, hepatoblastoma cells and human umbilical vein endothelial cells. The microtissues were supplemented with a combination of palmitic acid and oleic acid to develop fibrosis models. Subsequently, various groups of microtissues were exposed to SIM and SIM-LipoNPs at doses of 5 and 10 mg/mL. The effectiveness of the treatments was evaluated by analysing cell viability, production of reactive oxygen species (ROS) and nitric oxide (NO), the expression of Kruppel-like factor (KLF) 2, and pro-inflammatory cytokines (interleukin(IL)-1 α, IL-1 ß, IL-6 and tumour necrosis factor-α), and the expression of collagen I. Our results indicated that SIM-LipoNPs application showed promising results. SIM-LipoNPs effectively amplified the SIM-klf2-NO pathway at a lower dosage compatible with a high dosage of free SIM, which also led to reduced oxidative stress by decreasing ROS levels. SIM-LipoNPs administration also resulted in a significant reduction in pro-inflammatory cytokines and Collagen I mRNA levels, as a marker of fibrosis. In conclusion, our study highlights the considerable therapeutic potential of using SIM-LipoNPs to prevent liver fibrosis progress, underscoring the remarkable properties of SIM-LipoNPs in activating the KLF2-NO pathway and anti-oxidative and anti-inflammatory response.

A randomized controlled trial on hair follicular-derived microtissue for promoting wound healing and alleviating postoperative complications after hair transplantation.

BACKGROUND: Hair transplantation, particularly through follicular unit extraction (FUE), can lead to postoperative complications, such as numbness, itching, and pain in donor areas, primarily because of delayed wound healing. Efficient management of donor-site healing is crucial to mitigate these complications and improve overall patient outcomes. OBJECTIVE: This study aimed to assess the efficacy of hair follicular-derived microtissue (HFMT) in promoting wound healing and alleviating postoperative complications in donor areas after FUE hair transplantation. METHODS: Perifollicular tissue obtained during the trimming phase of hair transplantation was processed into HFMT and analyzed for its properties using histological and molecular techniques. In a single-blind, split-scalp study involving 98 participants, Group A received HFMT or mupirocin, whereas Group B received HFMT or no treatment. Dermatoscopic images were captured postoperatively, and visual analog scale scores were used to evaluate pain, itching, and numbness. RESULTS: HFMT-treated donor sites in Group A demonstrated a significantly higher wound closure ratio on postoperative day 3 than mupirocin-treated sites. Pain scores for HFMT-treated sites were consistently lower on postoperative days 3, 5, and 7. Similar trends were observed for itching scores. Group B exhibited outcomes comparable with Group A. CONCLUSION: The application of HFMT homogenates effectively accelerated wound healing and alleviated donor-site complications after FUE hair transplantation.

Injectable cartilage microtissues based on 3D culture using porous gelatin microcarriers for cartilage defect treatment.

Cartilage tissues possess an extremely limited capacity for self-repair, and current clinical surgical approaches for treating articular cartilage defects can only provide short-term relief. Despite significant advances in the field of cartilage tissue engineering, avoiding secondary damage caused by invasive surgical procedures remains a challenge. In this study, injectable cartilage microtissues were developed through 3D culture of rat bone marrow mesenchymal stem cells (BMSCs) within porous gelatin microcarriers (GMs) and induced differentiation. These microtissues were then injected for the purpose of treating cartilage defects in vivo, via a minimally invasive approach. GMs were found to be noncytotoxic and favorable for cell attachment, proliferation and migration evaluated with BMSCs. Moreover, cartilage microtissues with a considerable number of cells and abundant extracellular matrix components were obtained from BMSC-laden GMs after induction differentiation culture for 28 days. Notably, ATDC5 cells were complementally tested to verify that the GMs were conducive to cell attachment, proliferation, migration and chondrogenic differentiation. The microtissues obtained from BMSC-laden GMs were then injected into articular cartilage defect areas in rats and achieved superior performance in alleviating inflammation and repairing cartilage. These findings suggest that the use of injectable cartilage microtissues in this study may hold promise for enhancing the long-term outcomes of cartilage defect treatments while minimizing the risk of secondary damage associated with traditional surgical techniques.

Superimposed Electric Field Enhanced Electrospray for High-Throughput and Consistent Cell Encapsulation.

Cell encapsulation technology, crucial for advanced biomedical applications, faces challenges in existing microfluidic and electrospray methods. Microfluidic techniques, while precise, can damage vulnerable cells, and conventional electrospray methods often encounter instability and capsule breakage during high-throughput encapsulation. Inspired by the transformation of the working state from unstable dripping to stable jetting triggered by local electric potential, this study introduces a superimposed electric field (SEF)-enhanced electrospray method for cell encapsulation, with improved stability and biocompatibility. Utilizing stiffness theory, we quantitatively analyze the stability of the electrospray, whose stiffness is five times stronger under conical confinement. The SEF technique enabled rapid, continuous production of ∼300 core-shell capsules per second in an aqueous environment, significantly improving cell encapsulation efficiency. Our method demonstrated remarkable potential as exemplified in two key applications: 1) a 92-fold increase in human-derived induced pluripotent stem cells (iPSCs) expansion over 10 days, outperforming traditional 2D cultures in both growth rate and pluripotency maintenance, and 2) the development of liver capsules for steatosis modeling, exhibiting normal function and biomimetic lipid accumulation. The SEF-enhanced electrospray method presents a significant advancement in cell encapsulation technology. It offers a more efficient, stable, and biocompatible approach, opening new possibilities in clinical transplantation, drug screening, and cell therapy. This article is protected by copyright. All rights reserved.

Vascular units as advanced living materials for bottom-up engineering of perfusable 3D microvascular networks.

The timely establishment of functional neo-vasculature is pivotal for successful tissue development and regeneration, remaining a central challenge in tissue engineering. In this study, we present a novel (micro)vascularization strategy that explores the use of specialized "vascular units" (VUs) as building blocks to initiate blood vessel formation and create perfusable, stroma-embedded 3D microvascular networks from the bottom-up. We demonstrate that VUs composed of endothelial progenitor cells and organ-specific fibroblasts exhibit high angiogenic potential when embedded in fibrin hydrogels. This leads to the formation of VUs-derived capillaries, which fuse with adjacent capillaries to form stable microvascular beds within a supportive, extracellular matrix-rich fibroblastic microenvironment. Using a custom-designed biomimetic fibrin-based vessel-on-chip (VoC), we show that VUs-derived capillaries can inosculate with endothelialized microfluidic channels in the VoC and become perfused. Moreover, VUs can establish capillary bridges between channels, extending the microvascular network throughout the entire device. When VUs and intestinal organoids (IOs) are combined within the VoC, the VUs-derived capillaries and the intestinal fibroblasts progressively reach and envelop the IOs. This promotes the formation of a supportive vascularized stroma around multiple IOs in a single device. These findings underscore the remarkable potential of VUs as building blocks for engineering microvascular networks, with versatile applications spanning from regenerative medicine to advanced in vitro models.

Three-dimensional cardiac models: a pre-clinical testing platform.

Major advancements in human pluripotent stem cell (hPSC) technology over recent years have yielded valuable tools for cardiovascular research. Multi-cell type 3-dimensional (3D) cardiac models in particular, are providing complementary approaches to animal studies that are better representatives than simple 2-dimensional (2D) cultures of differentiated hPSCs. These human 3D cardiac models can be broadly divided into two categories; namely those generated through aggregating pre-differentiated cells and those that form self-organizing structures during their in vitro differentiation from hPSCs. These models can either replicate aspects of cardiac development or enable the examination of interactions among constituent cell types, with some of these models showing increased maturity compared with 2D systems. Both groups have already emerged as physiologically relevant pre-clinical platforms for studying heart disease mechanisms, exhibiting key functional attributes of the human heart. In this review, we describe the different cardiac organoid models derived from hPSCs, their generation methods, applications in cardiovascular disease research and use in drug screening. We also address their current limitations and challenges as pre-clinical testing platforms and propose potential improvements to enhance their efficacy in cardiac drug discovery.

Bioengineering scalable and drug-responsive in vitro human multicellular non-alcoholic fatty liver disease microtissues encapsulated in the liver extracellular matrix-derived hydrogel.

Non-alcoholic fatty liver disease (NAFLD) is a high-prevalence and progressive disorder. Due to lack of reliable in vitro models to recapitulate the consecutive phases, the exact pathogenesis mechanism of this disease and approved therapeutic medications have not been revealed yet. It has been proven that the interplay between multiple hepatic cell types and liver extracellular matrix (ECM) are critical in NAFLD initiation and progression. Herein, a liver microtissue (LMT) consisting of Huh-7, THP-1, and LX-2 cell lines and human umbilical vein endothelial cells (HUVEC), which could be substituted for the main hepatic cells (hepatocyte, Kupffer, stellate, and sinusoidal endothelium, respectively), encapsulated in liver derived ECM-Alginate composite, was bioengineered. When the microtissues were treated with free fatty acids (FFAs) including Oleic acid (6.6×10-4M) and Palmitic acid (3.3×10-4M), they displayed the key features of NAFLD, including similar pattern of transcripts for genes involved in lipid metabolism, inflammation, insulin-resistance, and fibrosis, as well as pro-inflammatory and pro-fibrotic cytokines' secretions and intracellular lipid accumulation. Continuing FFAs supplementation, we demonstrated that the NAFLD phenomenon was established on day 3 and progressed to the initial fibrosis stage by day 8. Furthermore, this model was stable until day 12 post FFAs withdrawal on day 3. Moreover, administration of an anti-steatotic drug candidate, Liraglutide (15 µM), on the NAFLD microtissues significantly ameliorated the NAFLD phenomenon. Overall, we bioengineered a drug-responsive, cost-benefit liver microtissues which can simulate the initiation and progression of NAFLD. It is expected that this platform could potentially be used for studying molecular pathogenesis of NAFLD and high-throughput drug screening. See also the graphical abstract(Fig. 1).

The influence of spheroid maturity on fusion dynamics and micro-tissue assembly in 3D tumor models.

Three-dimensional (3D) cell culture has been used in many fields of biology because of its unique advantages. As a representative of the 3D systems, 3D spheroids are used as building blocks for tissue construction. Larger tumor aggregates can be assembled by manipulating or stacking the tumor spheroids. The motivation of this study is to investigate the behavior of the cells distributed at different locations of the spheroids in the fusion process and the mechanism behind it. To this aim, spheroids with varying grades of maturity or age were generated for fusion to assemble micro-tumor tissues. The dynamics of the fusion process, the motility of the cells distributed in different heterogeneous architecture sites, and their reactive oxygen species profiles were studied. We found that the larger the spheroid necrotic core, the slower the fusion rate of the spheroid. The cells that move were mainly distributed on the spheroid's surface during fusion. In addition to dense microfilament distribution and low microtubule content, the reactive oxygen content was high in the fusion site, while the non-fusion site was the opposite. Last, multi-spheroids with different maturities were fused to complex micro-tissues to mimic solid tumors and evaluate Doxorubicin's anti-tumor efficacy.

Facile and Rapid Microcontact Printing of Additive-Free Polydimethylsiloxane for Biological Patterning Diversity.

The development and application of micropatterning technology play a promising role in the manipulation of biological substances and the exploration of life sciences at the microscale. However, the universally adaptable micropatterning method with user-friendly properties for acceptance in routine laboratories remains scarce. Herein, a green, facile, and rapid microcontact printing method is reported for upgrading popularization and diversification of biological patterning. The three-step printing can achieve high simplicity and fidelity of additive-free polydimethylsiloxane (PDMS) micropatterning and chip fabrication within 8 min as well as keep their high stability and diversity. A detailed experimental report is provided to support the advanced microcontact printing method. Furthermore, the applications of easy-to-operate PDMS-patterned chips are extensively validated to complete microdroplet array assembly with spatial control, cell pattern formation with high efficiency and geometry customization, and microtissue assembly and biomimetic tumor construction on a large scale. This straightforward method promotes diverse micropatternings with minimal time, effort, and expertise and maximal biocompatibility, which might broaden its applications in interdisciplinary scientific communities. This work also offers an insight into the establishment of popularized and market-oriented microtools for biomedical purposes such as biosensing, organs on a chip, cancer research, and bioscreening.

3D bio-printing-based vascular-microtissue electrochemical biosensor for fish parvalbumin detection.

A novel 3D bio-printing vascular microtissue biosensor was developed to detect fish parvalbumin quickly. The graphite rod electrode was modified with gold and copper organic framework (Cu-MOF) to improve the sensor properties. Polydopamine-modified multi-wall carbon nanotubes (PDA-MWCNT) were mixed with gelatin methacryloyl (GelMA) to prepare a conductive hydrogel. The conductive hydrogel was mixed with mast cells and endothelial cells to produce a bio-ink for 3D bioprinting. High throughput and standardized preparation of vascular microtissue was performed by stereolithography 3D bioprinting. The vascular microtissue was immobilized on the modified electrode to construct the microtissue sensor. The biosensor's peak current was positively correlated with the fish parvalbumin concentration, and the detection linear concentration range was 0.1 ∼ 2.5 µg/mL. The standard curve equation was IDPV(µA) = 31.30 + 5.46 CPV(µg/mL), the correlation coefficient R2 was 0.990 (n = 5), and the detection limit was 0.065 µg/mL. These indicated a biomimetic microtissue sensor detecting fish parvalbumin has been successfully constructed.

Artificial Trachea from Microtissue Engineering and Three-Dimensional Printing for Tracheal Personalized Repair.

Millions of people suffer from tracheal defect worldwide each year, while autograft and allograft cannot meet existing treatment needs. Tissue-engineered trachea substitutes represent a promising treatment for tracheal defect, while lack of precisely personalized treatment abilities. Therefore, development of an artificial trachea that can be used for personalized transplantation is highly desired. In this study, we report the design and fabrication of an artificial trachea based on sericin microsphere (SM) by microtissue engineering technology and three-dimensional (3D) printing for personalized repair of tracheal defect. The SM possessed natural cell adhesion and promoting cell proliferation ability. Then, the microtissue was fabricated by coincubation of SM with chondrocytes and tracheal epithelial cells. This microtissue displayed good cytocompatibility and could support seed cell adhesion and proliferation. After that, this microtissue was individually assembled to form an artificial trachea by 3D printing. Notably, artificial trachea had an encouraging complete cartilaginous and epithelial structure after transplantation. Furthermore, the artificial trachea molecularly resembled native trachea as evidenced by similar expression of trachea-critical genes. Altogether, the work demonstrates the effectiveness of microtissue engineering and 3D printing for individual construction of artificial trachea, providing a promising approach for personalized treatment of tracheal defect.

Bioassembly of multicellular spheroids to mimic complex tissue structure using surface-modified magnetized nanofibers.

Advancements in biofabrication have led to major strides toward creating authentic organ models; however, replicating intricate organ structures without scaffolds remains challenging. In this study, we introduce a method utilizing surface-modifiable magnetic nanofibers to achieve precise control over spheroid functions and geometrical features, allowing the creation of multiple functional domains within a single microtissue. We generated magnetized nanofibers by electrospinning magnetic nanoparticles dispersed in poly-L-lactic acid solution. These fibers were then coated with polydopamine (PD) to enhance their biological functions, particularly reactive oxygen species (ROS) scavenging. These PD-coated magnetic fibers (PMFs) had magnetic-responsive properties when incorporated into human dermal fibroblast spheroids (0.019 ± 0.001 emu g-1). Furthermore, PMFs within the spheroids effectively regulated ROS levels by upregulating the expression of key anti-oxidative genes such assuperoxide dismutase-1(2.2 ± 0.1) andglutathione peroxidase-1(2.6 ± 0.1). By exploiting the magnetic responsiveness of spheroids, we were able to assemble them into various structures such as linear, triangular, and square structures using remotely applied magnetic forces. Within the assembled three-dimensional constructs, the cells in spheroids incorporating PMFs demonstrated resistance to ROS regulatory activity in the presence of hydrogen peroxide, while spheroids composed of bare fibers exhibited high ROS levels. Furthermore, we assembled spheroids containing fibroblasts and endothelial cells into complex tissue structures resembling vessels under magnetic manipulation. This innovative method holds tremendous promise for organ modeling and regenerative medicine due to the unprecedented control it allows in developing microtissues that closely emulate real organs.

Hydrogel-Sheathed hiPSC-Derived Heart Microtissue Enables Anchor-Free Contractile Force Measurement.

In vitro reconstruction of highly mature engineered heart tissues (EHTs) is attempted for the selection of cardiotoxic drugs suitable for individual patients before administration. Mechanical contractile force generated in the EHTs is known to be a critical indicator for evaluating the EHT response. However, measuring contractile force requires anchoring the EHT in a tailored force-sensing cell culture chamber, causing technical difficulties in the stable evaluation of contractile force in long-term culture. This paper proposes a hydrogel-sheathed human induced pluripotent stem cell (hiPSC)-derived heart microtissue (H3 M) that can provide an anchor-free contractile force measurement platform in commonly used multi-well plates. The contractile force associated with tissue formation and drug response is calculated by motion tracking and finite element analysis on the bending angle of the hydrogel sheath. From the experiment of the drug response, H3 M is an excellent drug screening platform with high sensitivity and early testing capability compared to conventionally anchored EHT. This unique platform would be useful and versatile for regenerative therapy and drug discovery research in EHT.

Insight to Biofabrication of Liver Microtissues for Disease Modeling: Challenges and Opportunities.

In the last decade, liver diseases with high mortality rates have become one of the most important health problems in the world. Organ transplantation is currently considered the most effective treatment for compensatory liver failure. An increasing number of patients and shortage of donors has led to the attention of reconstructive medicine methods researchers. The biggest challenge in the development of drugs effective in chronic liver disease is the lack of a suitable preclinical model that can mimic the microenvironment of liver problems. Organoid technology is a rapidly evolving field that enables researchers to reconstruct, evaluate, and manipulate intricate biological processes in vitro. These systems provide a biomimetic model for studying the intercellular interactions necessary for proper organ function and architecture in vivo. Liver organoids, formed by the self-assembly of hepatocytes, are microtissues and can exhibit specific liver characteristics for a long time in vitro. Hepatic organoids are identified as an impressive tool for evaluating potential cures and modeling liver diseases. Modeling various liver diseases, including tumors, fibrosis, non-alcoholic fatty liver, etc., allows the study of the effects of various drugs on these diseases in personalized medicine. Here, we summarize the literature relating to the hepatic stem cell microenvironment and the formation of liver Organoids.

Method for manufacture and cryopreservation of cartilage microtissues.

The financial viability of a cell and tissue-engineered therapy may depend on the compatibility of the therapy with mass production and cryopreservation. Herein, we developed a method for the mass production and cryopreservation of 3D cartilage microtissues. Cartilage microtissues were assembled from either 5000 human bone marrow-derived stromal cells (BMSC) or 5000 human articular chondrocytes (ACh) each using a customized microwell platform (the Microwell-mesh). Microtissues rapidly accumulate homogenous cartilage-like extracellular matrix (ECM), making them potentially useful building blocks for cartilage defect repair. Cartilage microtissues were cultured for 5 or 10 days and then cryopreserved in 90% serum plus 10% dimethylsulfoxide (DMSO) or commercial serum-free cryopreservation media. Cell viability was maximized during thawing by incremental dilution of serum to reduce oncotic shock, followed by washing and further culture in serum-free medium. When assessed with live/dead viability dyes, thawed microtissues demonstrated high viability but reduced immediate metabolic activity relative to unfrozen control microtissues. To further assess the functionality of the freeze-thawed microtissues, their capacity to amalgamate into a continuous tissue was assess over a 14 day culture. The amalgamation of microtissues cultured for 5 days was superior to those that had been cultured for 10 days. Critically, the capacity of cryopreserved microtissues to amalgamate into a continuous tissue in a subsequent 14-day culture was not compromised, suggesting that cryopreserved microtissues could amalgamate within a cartilage defect site. The quality ECM was superior when amalgamation was performed in a 2% O2 atmosphere than a 20% O2 atmosphere, suggesting that this process may benefit from the limited oxygen microenvironment within a joint. In summary, cryopreservation of cartilage microtissues is a viable option, and this manipulation can be performed without compromising tissue function.

Inhibitory Effects of Epithelial Cells on Fibrosis Mechanics of Microtissue and Their Spatiotemporal Dependence on the Epithelial-Fibroblast Interaction.

Cell-generated contraction force is the primary physical drive for fibrotic densification of biological tissues. Previous studies using two-dimensional culture models have shown that epithelial cells inhibit the myofibroblast-derived contraction force via the regulation of the fibroblast/myofibroblast transition (FMT). However, it remains unclear how epithelial cells interact with fibroblasts and myofibroblasts to determine the mechanical consequences and spatiotemporal regulation of fibrosis development. In this study, we established a three-dimensional microtissue model using an NIH/3T3 fibroblast-laden collagen hydrogel, incorporated with a microstring-based force sensor, to assess fibrosis mechanics. When Madin-Darby canine kidney epithelial cells were cocultured on the microtissue's surface, the densification, stiffness, and contraction force of the microtissue greatly decreased compared to the monocultured microtissue without epithelial cells. The key fibrotic features, such as enhanced protein expression of α-smooth muscle actin, fibronectin, and collagen indicating FMT and matrix deposition, respectively, were also significantly reduced. The antifibrotic effects of epithelial cells on the microtissue were dependent on the intercellular signaling molecule prostaglandin E2 (PGE2) with an effective concentration of 10 µM and their proximity to the fibroblasts, indicating paracrine cellular signaling between the two types of cells during tissue fibrosis. The effect of PGE2 on microtissue contraction was also dependent on the time point when PGE2 was delivered or blocked, suggesting that the presence of epithelial cells at an early stage is critical for preventing or treating advanced fibrosis. Taken together, this study provides insights into the spatiotemporal regulation of mechanical properties of fibrosis by epithelial cells, and the cocultured microtissue model incorporated with a real-time and sensitive force sensor will be a suitable system for evaluating fibrosis and drug screening.

Vascularized hiPSC-derived 3D cardiac microtissue on chip.

Functional vasculature is essential for delivering nutrients, oxygen, and cells to the heart and removing waste products. Here, we developed an in vitro vascularized human cardiac microtissue (MT) model based on human induced pluripotent stem cells (hiPSCs) in a microfluidic organ-on-chip by coculturing hiPSC-derived, pre-vascularized, cardiac MTs with vascular cells within a fibrin hydrogel. We showed that vascular networks spontaneously formed in and around these MTs and were lumenized and interconnected through anastomosis. Anastomosis was fluid flow dependent: continuous perfusion increased vessel density and thus enhanced the formation of the hybrid vessels. Vascularization further improved endothelial cell (EC)-cardiomyocyte communication via EC-derived paracrine factors, such as nitric oxide, and resulted in an enhanced inflammatory response. The platform sets the stage for studies on how organ-specific EC barriers respond to drugs or inflammatory stimuli.

Stratified tissue biofabrication by rotational internal flow layer engineering.

The bioassembly of layered tissue that closely mimics human histology presents challenges for tissue engineering. Existing bioprinting technologies lack the resolution and cell densities necessary to form the microscale cell-width layers commonly observed in stratified tissue, particularly when using low-viscosity hydrogels, such as collagen. Here we present rotational internal flow layer engineering (RIFLE), a novel, low-cost biofabrication technology for assembling tuneable, multi-layered tissue-like structures. Using high-speed rotating tubular moulds, small volumes of cell-laden liquids added to the inner surface were transitioned into thin layers and gelled, progressively building macroscale tubes composed of discrete microscale strata with thicknesses a function of rotational speed. Cell encapsulation enabled the patterning of high-density layers (108cells ml-1) into heterogenous constructs. RIFLE versatility was demonstrated through tunica media assembly, encapsulating human smooth muscle cells in cell-width (12.5µm) collagen layers. Such deposition of discrete microscale layers, facilitates the biofabrication of composite structures mimicking the nature of native stratified tissue. This enabling technology has the potential to allow researchers to economically create a range of representative layered tissue.

Waffle-inspired hydrogel-based macrodevice for spatially controlled distribution of encapsulated therapeutic microtissues and pro-angiogenic endothelial cells.

Macro-encapsulation systems for delivery of cellular therapeutics in diabetes treatment offer major advantages such as device retrievability and high cell packing density. However, microtissue aggregation and absence of vasculature have been implicated in the inadequate transfer of nutrients and oxygen to the transplanted cellular grafts. Herein, we develop a hydrogel-based macrodevice to encapsulate therapeutic microtissues positioned in homogeneous spatial distribution to mitigate their aggregation while concurrently supporting an organized intra-device network of vascular-inductive cells. Termed Waffle-inspired Interlocking Macro-encapsulation (WIM) device, this platform comprises two modules with complementary topography features that fit together in a lock-and-key configuration. The waffle-inspired grid-like micropattern of the "lock" component effectively entraps insulin-secreting microtissues in controlled locations while the interlocking design places them in a co-planar spatial arrangement with close proximity to vascular-inductive cells. The WIM device co-laden with INS-1E microtissues and human umbilical vascular endothelial cells (HUVECs) maintains desirable cellular viability in vitro with the encapsulated microtissues retaining their glucose-responsive insulin secretion while embedded HUVECs express pro-angiogenic markers. Furthermore, a subcutaneously implanted alginate-coated WIM device encapsulating primary rat islets achieves blood glucose control for 2 weeks in chemically induced diabetic mice. Overall, this macrodevice design lays foundation for a cell delivery platform, which has the potential to facilitate nutrients and oxygen transport to therapeutic grafts and thereby might lead to improved disease management outcome.