Constructing multi-layer heterogeneous interfaces in liquid metal graphite hybrid powder: Towards microwave absorption enhancement.

Carbon based materials are widely used in the preparation of microwave absorption materials due to their low density, high attenuation loss and large specific surface area. However, their high conductivity usually leads to high reflection loss. In this study, multi-layer heterogeneous interfaces were constructed in liquid metal graphite hybrid powder to reduce reflection loss and enhance microwave absorption performance. Gallium oxide (Ga2O3) layer was formed in Ga coated graphite powder to improve impedance matching and attenuation constant via an annealing treatment. Specifically, the hybrid particles with 50 wt% Ga and being annealed at 120 °C for 2 h have a minimum reflection loss (RLmin) value of -42.68 dB and a maximum effective absorption bandwidth (EAB) of 4.11 GHz at a thickness of 3.3 mm. The hybrid particles not only have multi-layer structures with different electrical conductivity, but also form heterojunctions between different interfaces, which can further enhance dipole and interfacial polarization.

Carbon nanofiber coated ionic crystal architecture withconfinement effect for high-performance microwave absorption along with high-efficiency water harvesting from air.

Water is considered an effective microwave absorber due to its high transmittance and frequency-dispersive dielectric constant, yet it is challenging to form it into a stable state as an absorber. Herein, we developed a water-containing microwave absorber using chemical vapor deposition (CVD), namely, the bifunctional carbon/NaCl multi-interfaces hybrid with excellent water harvesting and microwave absorption performance. Carbon/NaCl exhibits remarkable water harvesting abilities from air, exceeding 210 % of its weight in 12 h. The development of the hydrophilic/hydrophobic heterojunction interface is responsible for this outstanding performance. Additionally, the interfacial polarization provided by carbon/NaCl, along with the dipole polarization induced by the internally captured water and defects, enhances its microwave absorption. The carbon/NaCl hybrid achieved a minimum reflection loss (RLmin) of -69.62 dB at 17.1 GHz with a thickness of 2.13 mm, and a maximum effective absorption bandwidth (EABmax) of 6.74 GHz at a thickness of 2.5 mm. Compared with raw NaCl (RLmin of -24.5 dB, EABmax of 3.88 GHz), the RLmin and EABmax values of the absorber increased by approximately 2.85 and 1.74 times. These results highlight the potential for bifunctional carbon/NaCl hybrid in applications within extreme environments, presenting a promising avenue for further research and development.

MoS2 Decorated on 1D MoS2@Co/NC@CF Hierarchical Fibrous Membranes for Enhanced Microwave Absorption.

The design and development of high-quality electromagnetic waves (EMW) absorbing materials play a vital role in combating the escalating negative effects of microwave radiation and interference. Herein, MoS2@Co/NC@CF fibrous membranes are successfully fabricated by electrospinning technology and carbonization, and a molybdenum disulfide (MoS2) layer is synthesized on the surface of these fibers via hydrothermal method. The seed-assisted growth method not only effectively avoids the accumulation and improves the loading of ZIF-67 particles, so as to ensure that the magnetic components in the fibers are evenly distributed in a wider range, rather than only intermittently present in some sites. Meanwhile, the introduction of semiconductor MoS2 as the shell further optimizes the impedance matching and improves the EMW absorption performance of the carbon fibrous membranes: the minimum reflection loss (RLmin) is -67.56 dB, and the maximum effective absorption bandwidth (EABmax) is further expanded to 6.56 GHz (2.1 mm, 11.44-18 GHz). This work provides a feasible method for developing high-efficient EMW-absorbing materials.

Excellent Low-Frequency Microwave Absorption and High Thermal Conductivity in Polydimethylsiloxane Composites Endowed by Hydrangea-Like CoNi@BN Heterostructure Fillers.

The advancement of thin, lightweight, and high-power electronic devices has increasingly exacerbated issues related to electromagnetic interference and heat accumulation. To address these challenges, a spray-drying-sintering process is employed to assemble chain-like CoNi and flake boron nitride (BN) into hydrangea-like CoNi@BN heterostructure fillers. These fillers are then composited with polydimethylsiloxane (PDMS) to develop CoNi@BN/PDMS composites, which integrate low-frequency microwave absorption and thermal conductivity. When the volume fraction of CoNi@BN is 44 vol% and the mass ratio of CoNi to BN is 3:1, the CoNi@BN/PDMS composites exhibit optimal performance in both low-frequency microwave absorption and thermal conductivity. These composites achieve a minimum reflection loss of -49.9 dB and a low-frequency effective absorption bandwidth of 2.40 GHz (3.92-6.32 GHz) at a thickness of 4.4 mm, fully covering the n79 band (4.4-5.0 GHz) for 5G communications. Meanwhile, the in-plane thermal conductivity (λ∥) of the CoNi@BN/PDMS composites is 7.31 W m-1 K-1, which is ≈11.4 times of the λ∥ (0.64 W m-1 K-1) for pure PDMS, and 32% higher than that of the (CoNi/BN)/PDMS composites (5.52 W m-1 K-1) with the same volume fraction of CoNi and BN obtained through direct mixing.

Research on Efficient Electromagnetic Shielding Performance and Modulation Mechanism of Aero/Organo/Hydrogels with Gravity-Induced Asymmetric Gradient Structure.

To eliminate electromagnetic pollution, it is a challenging task to develop highly efficient electromagnetic shielding materials that integrate microwave absorption (MA) performance with high shielding capability and achieve tunability in shielding performance. Asymmetrically structured aero/organo/hydrogels with a progressively changing concentration gradient of liquid metal nanoparticles (LMNPs), induced by gravity, are prepared by integrating the conductive fillers Ti3C2Tx MXene and LMNPs into a dual-network structure composed of polyvinyl alcohol and cellulose nanofibers. Benefiting from the unique structure, which facilitates the absorption-reflection-reabsorption process of electromagnetic waves along with conductive fillers and the porous structure, three types of gels demonstrate efficient shielding performance. HPCML achieves a total shielding effectiveness (SET) of up to 86.9 dB and a reflection shielding effectiveness (SER) of as low as 2.85 dB. Especially, APCML, with an ultra-low reflection coefficient (R) of 6.4%, achieves compatibility between shielding performance and MA properties. The relationship between dispersing media (air, water, and glycerol/water) and the shielding performance of aero/organo/hydrogels is explored, thereby achieving modulation of the shielding performance of the gel system. The work has paved a clear path for integrating absorption and shielding capabilities into a composite material, thereby providing a prototype of a highly efficient shielding material with MA performance.

Functional Carbon Springs Enabled Dynamic Tunable Microwave Absorption and Thermal Insulation.

Electromagnetic (EM) wave pollution and thermal damage pose serious hazards to delicate instruments. Functional aerogels offer a promising solution by mitigating EM interference and isolating heat. However, most of these materials struggle to balance thermal protection with microwave absorption (MA) efficiency due to a previously unidentified conflict between the optimizing strategies of the two properties. Herein, this study reports a solution involving the design of a carbon-based aerogel called functional carbon spring (FCS). Its unique long-range lamellar multi-arch microstructure enables tunable MA performance and excellent thermal insulation capability. Adjusting compression strain from 0% to 50%, the adjustable effective absorption bandwidth (EAB) spans up to 13.4 GHz, covering 84% of the measured frequency spectrum. Notably, at 75% strain, the EAB drops to 0 GHz, demonstrating a novel "on-off" switchability for MA performance. Its ultralow vertical thermal conductivity (12.7 mW m-1 K-1) and unique anisotropic heat transfer mechanism endow FCS with superior thermal protection effectiveness. Numerical simulations demonstrate that FCS outperforms common honeycomb structures and isotropic porous aerogels in thermal management. Furthermore, an "electromagnetic-thermal" dual-protection material database is established, which intuitively demonstrates the superiority of the solution. This work contributes to the advancement of multifunctional MA materials with significant potential for practical applications.

Magneto-Dielectric Synergy and Multiscale Hierarchical Structure Design Enable Flexible Multipurpose Microwave Absorption and Infrared Stealth Compatibility.

Developing advanced stealth devices to cope with radar-infrared (IR) fusion detection and diverse application scenarios is increasingly demanded, which faces significant challenges due to conflicting microwave and IR cloaking mechanisms and functional integration limitations. Here, we propose a multiscale hierarchical structure design, integrating wrinkled MXene IR shielding layer and flexible Fe3O4@C/PDMS microwave absorption layer. The top wrinkled MXene layer induces the intensive diffuse reflection effect, shielding IR radiation signals while allowing microwave to pass through. Meanwhile, the permeable microwaves are assimilated into the bottom Fe3O4@C/PDMS layer via strong magneto-electric synergy. Through theoretical and experimental optimization, the assembled stealth devices realize a near-perfect stealth capability in both X-band (8-12 GHz) and long-wave infrared (8-14 µm) wavelength ranges. Specifically, it delivers a radar cross-section reduction of - 20 dB m2, a large apparent temperature modulation range (ΔT = 70 °C), and a low average IR emissivity of 0.35. Additionally, the optimal device demonstrates exceptional curved surface conformability, self-cleaning capability (contact angle ≈ 129°), and abrasion resistance (recovery time ≈ 5 s). This design strategy promotes the development of multispectral stealth technology and reinforces its applicability and durability in complex and hostile environments.

Facile Fabrication of Co-Doped Porous Carbon from Coal Hydrogasification Semi-Coke for Efficient Microwave Absorption.

A Co-doped porous carbon was successfully fabricated by a facile carbonizing procedure using coal hydrogasification semi-coke (SC) as the carbon and cobalt nitrate as the magnetic precursors, respectively. The mass ratio of the precursors was changed to regulate the microwave absorption (MA) capabilities. The favorable MA capabilities are a result of a synergistic interaction be-tween the dielectric loss from the carbon framework, the magnetic loss from nano-sized Co particles, and multiple scattering from the residual pores. At a thickness of 4.0 mm, the Co/C composite showed the lowest reflection loss of -33.45 dB when the initial mass ratio of cobalt nitrate and SC was 1:1. The effective absorbing bandwidth (EAB) could achieve 3.5 GHz at 2 mm thickness. This work not only opens up a new avenue for the facile fabrication of dielectric and magnetic loss combinations and their structural design, but it also creates a new route for the high value-added exploitation of SC.

Graphene-Wrapped Magnetic Multichamber Ti3C2Tx Spheres for Stable Broadband Microwave Absorption.

Two-dimensional transition metal carbides/nitrides (MXenes) have aroused widespread interest in the field of microwave absorption because of their unique layered structures. However, the inherent aggregation, poor impedance matching, and low chemical stability of MXenes inevitably obstruct their practical applications. Herein, a multichamber Fe3O4/Ti3C2Tx@reduced graphene oxide (FT@RGO) hierarchical structure was constructed through self-assembly and sacrificial template strategies where the Ti3C2Tx nanosheets were assembled into hollow microspheres that were decorated with Fe3O4 nanospheres and wrapped by RGO nanosheets. The massive heterointerfaces and interior cavities favor enhanced microwave absorption performance via interfacial polarization, multiple scattering/reflections, and dielectric-magnetic synergistic effects. Consequently, the synthesized ultralight FT@RGO foam (0.009 g/cm3) presents superior microwave absorption ability with the minimum reflection loss of -50.5 dB at the matching thickness of 2.5 mm and effective absorption bandwidth of 8.0 GHz covering the frequency range of 10.0-18.0 GHz at the thickness of 2 mm. Furthermore, the encapsulation of hollow Ti3C2Tx spheres by RGO nanosheets avoids direct contact with external air, which considerably improves the stability of Ti3C2Tx and ensures the long-term application of FT@RGO foam in a conventional environment. This work provides a reference for the structural design of MXene-based materials as broadband and durable microwave absorbers.

Construction of Chiral-Magnetic-Dielectric Trinity Structures with Different Magnetic Systems for Efficient Low-Frequency Microwave Absorption.

The fabrication of carbon nanocoil (CNC)-based chiral-dielectric-magnetic trinity composites holds great significance in low-frequency microwave absorption fields. However, it is not clear that how the different magnetic systems affect the magnetic and frequency responses of the composites. Herein, four types of magnetic metals, FeCo, CoNi, FeNi, and FeCoNi, are selected to be combined with the chiral templates respectively, resulting in four types of chiral-dielectric-magnetic composites with similar morphology. The CNC templates endow all the composites with excellent dielectric loss. Further permeability analysis and the micro-magnetic simulation confirm that the frequency response region can be well adjusted by changing the magnetic systems with specific magnetic resonance modes and magnetic domain motion. Due to the synergistic effect between magnetism, chirality, and dielectricity, the FeNi-based composites exhibit the best low-frequency microwave absorption performance. The minimum RL of -60.7 dB is achieved at 6.7 GHz with an ultra-low filling ratio of 10%, and the EAB value in low-frequency region is extended to 3.7 GHz. This study provides further guidelines for the design of the chiral-dielectric-magnetic trinity composites in low-frequency microwave absorption.

Construction of 3D Fibonacci Cauliflower-Like NiCo2S4/Expanded Graphite Heterogeneous Structures for Enhanced Electromagnetic Wave Absorption.

Highly efficient electromagnetic wave (EMW)-absorbing multicomposites can be fabricated by constructing particular structures using suitable components. Expanded graphite (EG) has a 3D, low-density porous structure; however, it suffers from poor impedance matching and EMW absorption properties. Based on this information, in the present study, NiCo2S4 components with different morphologies are successfully loaded onto a 3D EG surface using a facile microwave solvothermal method to achieve a synergistic effect between the different components. The NiCo2S4 content is adjusted to alter the compositional morphology and electromagnetic parameters of the composites to achieve impedance-matching and obtain excellent EMW absorption properties. The heterogeneous interface between EG and NiCo2S4 induces an inhomogeneous spatial charge distribution and enhances interfacial polarization. The defects in the material and oxygen-containing groups induce dipole polarization, which enhances the polarization-relaxation process of the composites. The 3D porous heterostructure of the "Fibonacci cauliflower"-shaped NiCo2S4/EG composites results in an optimal reflection loss of -64.93 dB at a filler rate of only 14 wt.%. Analysis of the synergistic conduction loss and polarization loss mechanisms in carbon-based materials with heterogeneous interfaces has led to the development of excellent EMW absorption materials.

Zn-Al Ferrite/Polypyrrole Nanocomposites: Structure and Dielectric and Magnetic Properties for Microwave Applications.

In this study, Zn-Al ferrite/polypyrrole (PPy) nanocomposites were synthesized and thoroughly characterized to explore their potential for microwave applications. X-ray diffraction analysis confirmed the presence of ZnO, AlFeO3, and Fe2O3 phases, with the crystal size decreasing from 31 nm to 19.6 nm as aluminum content increased. High-resolution transmission electron microscopy (HR-TEM) revealed a distinctive core-shell morphology, where the polypyrrole encapsulates the ZnAlxFe2-xO4 particles. Magnetic measurements showed that decreasing aluminum concentration led to a reduction in both saturation magnetization (Ms) from 75 emu/g to 36 emu/g and remanent magnetization (Mr) from 2.26 emu/g to 2.00 emu/g. Dielectric analysis indicated that both the real (ε') and imaginary (ε″) components of dielectric permittivity decreased with increasing frequency, particularly between 10 and 14 GHz. Furthermore, electrical modulus analysis highlighted the significant impact of aluminum doping on relaxation time (τIP), indicating the presence of interface polarization. Impedance spectroscopy results underscored the dominance of interface polarization at lower frequencies and the presence of strong conduction paths at higher frequencies. These combined magnetic and dielectric loss mechanisms suggest that the Zn-Al ferrite/polypyrrole nanocomposite is a promising candidate for advanced microwave absorption applications.

Enhancement of Microwave Heating Technology for Emulsified Asphalt Mixtures Using SiC-Fe3O4 Composite Material.

The application of microwave heating technology can significantly enhance the water evaporation rate of emulsified asphalt mixtures post paving. To improve the microwave absorption and curing performance of these mixtures, SiC-Fe3O4 composite material (SF) was incorporated. This addition aims to enhance the microwave absorption efficiency and accelerate the curing process of emulsified asphalt mixtures under microwave heating. This study begins with an analysis of the microwave absorption principles pertinent to emulsified asphalt mixtures. Subsequently, the microwave heating temperature fields of ordinary emulsified asphalt mixture (EAM), SiC emulsified asphalt mixture (S-EAM), Fe3O4 emulsified asphalt mixture (F-EAM), and SiC-Fe3O4 emulsified asphalt mixture (SF-EAM) were simulated using COMSOL Multiphysics finite element software (COMSOL 6.2). The early strength variations in SF-EAM under different microwave heating durations were then examined through adhesion tests, leading to the proposal of a microwave heat curing process for SF-EAM. Finally, the wear resistance, water damage resistance, rutting resistance, and skid resistance of SF-EAM post-microwave curing were evaluated through wet wheel wear tests, wheel track deformation tests, and road friction coefficient tests. The results indicate that the optimal microwave heating time is 90 s, with the microwave absorption performance of the materials ranked as follows: EAM, S-EAM, F-EAM, and SF-EAM, from lowest to highest. The road performance of SF-EAM complies with specification requirements, and its wear resistance, water damage resistance, and rutting resistance are notably improved after microwave heating.

Self-Templating Engineering of Hollow N-Doped Carbon Microspheres Anchored with Ternary FeCoNi Alloys for Low-Frequency Microwave Absorption.

Rational design and precision fabrication of magnetic-dielectric composites have significant application potential for microwave absorption in the low-frequency range of 2-8 GHz. However, the composition and structure engineering of these composites in regulating their magnetic-dielectric balance to achieve high-performance low-frequency microwave absorption remains challenging. Herein, a self-templating engineering strategy is proposed to fabricate hollow N-doped carbon microspheres anchored with ternary FeCoNi alloys. The high-temperature pyrolysis of FeCoNi alloy precursors creates core-shell FeCoNi alloy-graphitic carbon nano-units that are confined in carbon shells. Moreover, the anchored FeCoNi alloys play a critical role in maintaining hollow structural stability. In conjunction with the additional contribution of multiple heterogeneous interfaces, graphitization, and N doping to the regulation of electromagnetic parameters, hollow FeCoNi@NCMs exhibit a minimum reflection loss (RLmin) of -53.5 dB and an effective absorption bandwidth (EAB) of 2.48 GHz in the low-frequency range of 2-8 GHz. Furthermore, a filler loading of 20 wt% can also be used to achieve a broader EAB of 5.34 GHz with a matching thickness of 1.7 mm. In brief, this work opens up new avenues for the self-templating engineering of magnetic-dielectric composites for low-frequency microwave absorption.

C/Co3O4/Diatomite Composite for Microwave Absorption.

Transition metal oxides have been widely used in microwave-absorbing materials, but how to improve impedance matching is still an urgent problem. Therefore, we introduced urea as a polymer carbon source into a three-dimensional porous structure modified by Co3O4 nanoparticles and explored the influence of different heat treatment temperatures on the wave absorption properties of the composite. The nanomaterials, when calcined at a temperature of 450 °C, exhibited excellent microwave absorption capabilities. Specifically, at an optimized thickness of 9 mm, they achieved a minimum reflection loss (RLmin) of -97.3 dB, accompanied by an effective absorption bandwidth (EAB) of 9.83 GHz that comprehensively covered both the S and Ku frequency bands. On the other hand, with a thickness of 3 mm, the RLmin was recorded as -17.9 dB, with an EAB of 5.53 GHz. This excellent performance is attributed to the multi-facial polarization and multiple reflections induced by the magnetic loss capability of Co3O4 nanoparticles, the electrical conductivity of C, and the unique three-dimensional structure of diatomite. For the future development of bio-based microwave absorption, this work provides a methodology and strategy.

Bioinspired Hierarchical Composite for Multiband Defense.

The optimization of electromagnetic microwave absorbing (EMA) materials for radar stealth has been a continuous endeavor. However, meeting the defense requirements across multiple-frequency bands in increasingly complex and variable environments remains challenging. Drawing inspiration from the cytoskeleton-organelle structure, we designed and prepared a hierarchical MXene/NiFe2O4/calcined melamine foam (MNC) composite. The composite exhibits efficient and adjustable microwave absorption, infrared stealth, and solar absorption performance through the synergistic interaction of the components and the spatial effect of its novel microstructure. The composite achieves a minimum reflection loss of -58.57 dB and an effective absorption bandwidth (EAB) of 7.00 GHz, both of which can vary with the thickness. MNC also offers stable infrared stealth performance for heat sources ranging from 37 to 300 °C and high solar absorptivity up to 96.2%, promoting ambient-temperature-adaptive infrared stealth through electricity-sunlight cooperative regulation. With exceptional environmental adaptability characteristics such as photothermal conversion, lightness, elasticity, and hydrophobicity, the MNC composite holds promise as a multispectrum defense material for radar, infrared, and visible light for various forms of equipment, clothing, and wearables in harsh conditions.

Interfacial and Defective Construction from Diverse CuxSy Quantum Dots toward Broadband Carbon-Based Microwave Absorber.

In this study, highly monodisperse copper sulfide (CuxSy) quantum dots (QDs) have been successfully obtained using a ligand-chemistry strategy, and then a variety of S-deficient CuxSy/nitrogen-doped carbon (NC) heterointerfaces are constructed by compositional fine-tuning (Cu9S5 → Cu1.96S → Cu). First-principles calculations show that the S-deficient domains of CuxSy QDs and N-doped domains of carbon synergistically enhance the electron transfer from CuxSy to NC. In addition, the finite element simulations demonstrate that the diverse CuxSy QDs exhibit their intrinsic size and dielectric confinement effects to precisely manipulate the electric field distortion and improve the relaxation polarization. Consequently, CuxSy@NC achieves excellent impedance matching and a strong loss mode dominated by dielectric polarization. Among them, CuxSy@NC-650 has a maximum effective absorption bandwidth of 7.7 GHz at 2.5 mm, while CuxSy@NC-700 features a minimum reflection loss of -66.7 dB at 13.7 GHz, respectively. Furthermore, the simulations of radar cross-sections have confirmed that the CuxSy@NC series is promising in the field of radar stealth.

Design and Microwave Absorption Performance Study of SiC-Fe3O4 Emulsified Asphalt Mixture.

To address the challenges of slow curing speed and suboptimal microwave absorption during the paving of cold-mixed and cold-laid asphalt mixtures, this study introduces SiC-Fe3O4 composite material (SF) into emulsified asphalt mixtures to enhance microwave absorption and accelerate curing via microwave heating. Initially, based on the maximum density curve theory, an appropriate mineral aggregate gradation was designed, and the optimal ratio of emulsified asphalt mixture was determined through mixing tests, cohesion tests, wet wheel wear tests, and load wheel sand adhesion tests. Subsequently, the influence of SF content on the mixing performance of emulsified asphalt mixtures was analyzed through mixing and consistency tests. Finally, the microwave absorption performance of the mixture was evaluated by designing microwave heating tests under different conditions, using temperature indicators and quality indicators. The experimental results indicate that when SF content ranges from 0% to 4%, the mixing performance of the emulsified asphalt mixture meets specification requirements. The dosage of SF, SF composite ratio, and microwave power significantly impact microwave absorption performance, whereas environmental temperature has a relatively minor effect. The optimal mix ratio for the emulsified asphalt mixture is mineral aggregate:modified emulsified asphalt:water:cement = 100:12.8:6:1. The ideal SF dosage is 4%, with an optimal SiC to Fe3O4 composite ratio of 1:1, and a suitable microwave power range of 600-1000 W.

Designing a Microstructure of NiCo-LDH@CNTs@Carbon Foam for Efficient Electromagnetic Wave Absorption and Excellent Environmental Tolerance.

The constantly evolving environment imposes increasingly stringent demands on the mechanical qualities of materials employed for absorbing electromagnetic waves (EMWs). Therefore, there is an urgent need for advanced materials capable of efficiently absorbing EMWs and withstanding harsh electromagnetic conditions. In this study, the electrodeposition method was effectively used to synthesize nickel-cobalt layered double hydroxides (NiCo-LDHs) in a controlled manner on a composite structure of carbon nanotubes and carbon foam, creating an exquisite construction. The manipulation of the electrodeposition time facilitated the regulation of the density of the layered structure within the composite material, thereby significantly enhancing its polarization relaxation performance. Increased defect sites and interface polarization enhance impedance matching and the attenuation constant, resulting in greatly improved absorption performance. The optimized sample demonstrated exceptional wave-absorbing performance in comparative experimental analysis, attaining a maximum reflection loss of -58.18 dB. It also has an effective absorption bandwidth of 5.36 GHz at a wavelength of 2.28 mm. The exceptional isolation effect of LDH, coupled with the outstanding insulation ability of the porous carbon skeleton, confers remarkable corrosion resistance and thermal insulation performance on the composite material. Hence, this discovery offers novel insights into designing environmentally tolerant absorbent materials.

Customized Pore Creation Strategies for Hyperelastic, Robust, Insulating Multifunctional MXene Aerogels for Microwave Absorption.

The construction of heterogeneous microstructure and the selection of multicomponents have turned into a research hotspot in developing ultralight, multifunctional, high-efficiency electromagnetic wave absorbing (EMA) materials. Although aerogels are promising materials to fulfill the above requirements, the increase in functional fillers inevitably leads to the deterioration of intrinsic properties. Tuning the electromagnetic properties from the structural design point of view remains a difficult challenge. Herein, we design customized pore creation strategies via introducing sacrificial templates to optimize the conductive path and construct the discontinuous dielectric medium, increasing dielectric loss and achieving efficient microwave absorption properties. A 3D porous composite (MEM) was crafted, which encapsulated an EVA/FeCoNi (EVA/MNPs) framework with Ti3C2Tx MXene coating by employing a direct heated cross-linking and immersion method. Controllable adjustment of the conductive network inside the porous structure and regulation of the dielectric character are achieved by porosity variation. Eventually, the MEM-5 with a porosity of 66.67% realizes RLmin of -39.2 dB (2.2 mm) and can cover the entire X band. Moreover, through off-axis electronic holography and the calculation of conduction loss and polarization loss, the dielectric property is deeply investigated, and the inner mechanism of optimization is pointed out. Thanks to the inherent characteristic of EVA and the porous structure, MEM-5 showed excellent thermal insulating and superior compressibility, which can maintain 60 °C on a 90-100 °C continuous heating stage and reached a maximum compressive strength of 60.12 kPa at 50% strain. Conceivably, this work provides a facile method for the fabrication of highly efficient microwave absorbers applied under complex conditions.