Chitosan and its derivatives regulate lactic acid synthesis during milk fermentation.

Introduction: The influence of chitosan's physicochemical characteristics on the functionality of lactic acid bacteria and the production of lactic acid remains very obscure and contradictory to date. While some studies have shown a stimulatory effect of oligochitosans on the growth of Lactobacillus spp, other studies declare a bactericidal effect of chitosan. The lack and contradiction of knowledge prompted us to study the effect of chitosan on the growth and productivity of L. bulgaricus in the presence of chitosan and its derivatives. Methods: We used high molecular weight chitosan (350 kDa) and oligochitosans (25.4 and 45.3 kDa). The experiment was carried out with commercial strain of L. bulgaricus and the low fat skim cow milk powder reconstituted with sterile distilled water. After fermentation, dynamic viscosity, titratable acidity, pH, content of lactic acid, colony forming units, chitosan and oligochitosans radii were measured in the samples. Fermented dairy products were also examined using sodium dodecyl sulfate electrophoretic analysis, gas chromatography-mass spectrometry and light microscopy. Results and discussion: The results of the study showed that when L. bulgaricus was cultured in the presence of 25.4 kDa oligochitosans at concentrations of 0.0025%, 0.005%, 0.0075% and 0.01%, the average rate of LA synthesis over 24 hours was 11.0 × 10-3 mol/L/h, 8.7 × 10-3 mol/L/h, 6.8 × 10-3 mol/L/h, 5.8 × 10-3 mol/L/h, respectively. The 45.3 kDa oligochitosans had a similar effect, while the average rate of lactic acid synthesis in the control sample was only 3.5 × 10-3 mol/L/h. Notably, 350 kDa chitosan did not affect the rate of lactic acid synthesis compared with the control sample. Interestingly, interaction of chitosan with L. bulgaricus led to a slowdown in the synthesis of propanol, an increase in the content of unsaturated and saturated fatty acids, and a change in the composition and content of other secondary metabolites. The quantity of L. bulgaricus in a sample with 0.01% chitosan exceeded their content in the control sample by more than 1,700 times. At the same chitosan concentration, the fermentation process was slowed down, increasing the shelf life of the fermented milk product from 5 to 17 days while maintaining a high content of L. bulgaricus (6.34 × 106 CFU/g).

Research Progress of Chinese Medicine Monomers in Treatment of Cholangiocarcinoma.

Cholangiocarcinoma (CCA) is a malignant tumor originating from cholangiocytes. However, it remains unclear about the pathogenesis of this carcinoma, which may be related to multiple factors. Currently, CCA is mainly treated by surgery, chemotherapy, and radiotherapy. Among them, surgery is the only potentially curative option for CCA. Nevertheless, the high malignancy and asymptomatic nature of CCA may lead to poor treatment outcomes. It has been demonstrated that Chinese medicine (CM) plays a significant role in various antitumor applications. Meanwhile, CM exhibits fewer side effects and high availability. Moreover, the in vitro application of CM monomers has been explored in many domestic and foreign studies. This article mainly reviews the signaling pathways and molecular mechanisms of CM monomers in the treatment of CCA in recent years. These findings are expected to provide new insights into the treatment of CCA.

Liquid crystal monomers in human, dog and cat feces from the United States.

Little is known about exposure of humans and companion animals to liquid crystal monomers (LCMs), which are extensively used in digital displays. We determined the concentrations of 52 LCMs in feces of humans, pet dogs and cats from New York State, USA, using gas chromatography-high resolution mass spectrometry (GC-HRMS). Twenty-four, eight, and six LCMs, that were mainly fluorinated, were detected in human, dog, and cat feces, respectively. ∑LCMs concentrations in the feces of humans (mean: 8.01 ng/g dry weight [dw]) were significantly higher (p < 0.05) than those of dogs (mean: 1.82 ng/g dw) and cats (mean: 1.24 ng/g dw) and with concentrations measured as high as 39.8 ng/g dw. Rel-4'-((1r,1'r,4 R,4'R)-4'-ethyl-[1,1'-bi(cyclohexan)]-4-yl)-3,4-difluoro-1,1'-biphenyl (RELEEBCH or 2bcHdFB) was found at the highest detection frequency (DF) among LCMs analyzed in human (DF: 89 %), dog (DF: 28 %), and cat (DF: 50 %) feces, although this compound accounted only < 4 % of ∑LCM concentrations. The mean cumulative daily intakes of ∑LCMs, calculated through a reverse dosimetry approach, were 71.7, 87.5, and 10.7 ng/kg body weight (bw)/day for humans, dogs, and cats, respectively. This study provides evidence of exposure of both humans and pets to LCMs, highlighting the importance of assessing sources of exposure and associated health risks.

Development of HEMA-Succinic Acid-PEG Bio-Based Monomers for High-Performance Hydrogels in Regenerative Medicine.

In recent years, hydrogels have found a special place in regenerative medicine for tissue repair, rehabilitation, and drug delivery. To be used in regenerative medicine, hydrogels must have desirable physical, chemical, and biological properties. In this study, a new biomonomer based on hydroxyethyl methacrylate-succinic acid-polyethylene glycol 200 (HEMA-Suc-PEG) was synthesized and characterized. Then, using the synthesized monomers and different ratios of polyethylene glycol diacrylate (PEGDA) as a crosslinker, biocompatible hydrogels were synthesized through thermal and UV curing methods. The mechanical, physical, chemical, and biological properties of the hydrogels and the behavior of endothelial cells, an essential component of the cardiovascular system, were evaluated. The results showed that the hydrogel synthesized with 0.2 g of PEGDA (UV curing) has desirable mechanical and physical properties. Biological tests showed that these hydrogels are not only nontoxic to cells but also enhance cell adhesion. Therefore, the hydrogel containing the synthesized monomer HEMA-Suc-PEG and 0.2 g of PEGDA has the potential to be used in the cardiovascular system.

A comparative study on contamination profiles of liquid crystal monomers (LCMs) between outdoor and indoor dusts, and the assessment of health risk of human exposure.

Liquid crystal monomers (LCMs) are ubiquitous in various environmental samples, which has led to increasing concerns regarding their potential health risks to humans and wildlife. However, the comparison of the contamination patterns of LCMs between indoor and outdoor environments has rarely been studied. In this study, 35 LCMs were investigated in n = 55 dust samples collected from indoor (n = 20) and outdoor (n = 35) spaces in Yulin, Northwest China. The LCMs were widely detected in indoor and outdoor dusts; the total concentrations of LCMs ranged from 48.6 to 396 ng/g (median: 153 ng/g), and from not detectable to 388 ng/g (median: 56.4 ng/g) in indoor and outdoor dusts, respectively. The concentration levels of ΣLCMs in indoor dusts were significantly higher than those in outdoor dusts (p < 0.05). For each microenvironment, the ranking order of LCM concentrations was dormitory (mean: 202 ng/g) > teaching building (182 ng/g) > campus road (150 ng/g) > urban road (107 ng/g) > laboratory building (91.0 ng/g) > pedestrian street (20.1 ng/g). The mean estimated daily intake values of Σ35LCMs for adults were 2.48 × 10-2 and 1.37 × 10-3 ng/g BW/day in indoor and outdoor dusts, respectively. The hazard quotients of individual LCMs and hazard indices of all analytes were considerably less than one, indicating little health risk for humans via dust ingestion.

Nonthermal Atmospheric Plasma Promotes Bonding Between Adhesive Monomers and Zirconia.

OBJECTIVE: To investigate whether nonthermal atmospheric plasma (NTAP) can promote bonding between commonly used adhesive monomers and zirconia. MATERIALS AND METHODS: The zirconia surface and monomers (HEMA, BisGMA, TEGDMA, and MDP) were treated with different NTAP approaches (10 w, 30 s), and the surface characteristics and chemical structures between the zirconia surface and monomers were verified by the contact angle, scanning electron microscopy (SEM), attenuated total reflectance Fourier transform infrared (ATR/FT-IR) spectroscopy, and x-ray photoelectron spectroscopy (XPS). Scotchbond Universal adhesive with two different resin cements, RelyX Ultimate and RelyX Unicem 2, was applied, followed by NTAP-aided clinical procedures, and then microtensile bond strength test (µTBS) and failure mode evaluation were tested for preliminary mechanical properties assessment. One-way ANOVA was employed for the statistical analysis. RESULTS: The contact angle analysis, SEM, and ATR-FTIR confirmed that NTAP can promote the polymerization of BisGMA, TEGDMA, and MDP on the zirconia surface, while XPS confirmed that NTAP can induce a chemical reaction between MDP and zirconia. CONCLUSIONS: Nonthermal atmospheric plasma can increase the affinity between selected monomers and zirconia and promote the chemical bonding strength between phosphate monomers and zirconia; besides, it can enhance the bonding strength of two different adhesive systems. CLINICAL SIGNIFICANCE: The mechanism of how NTAP improved common adhesive monomers interacting with zirconia surfaces was revealed in this study. NTAP, as a relatively high energy-boosting method, could not only improve the surface affinity of zirconia and chemical bonding in-between monomers and zirconia but also enhance the polymerization of different monomers onto zirconia, resulting in improved bonding properties. Thus, further exploration of versatile bonding materials and/or onto different dental substrates could take this into account.

Enzymatic synthesis of aromatic biobased polymers in green, low-boiling solvents.

Given the urge to accelerate the substitution of petrol-derived solvents not only in more traditional fields like pharmaceuticals, personal care, or electronics but also in innovative research processes, this work focuses on the utilisation of four biobased solvents as media for the enzymatic synthesis of aliphatic-aromatic polyesters. As building blocks, the lignin-derived diethyl-2,4-pyridinedicarboxylate was selected as the potentially biobased, aromatic component while more classical diols such as 1,4-butanediol and 1,8-octanediol were used as the aliphatic portion. Results show that among the tested green solvents (cyclohexanone, phenetole, anisole and eucalyptol), the most suitable medium for lipase B from Candida antarctica-catalysed polycondensation reactions was eucalyptol that allowed reach monomer conversions >95 % and number average molecular weights up to 3500 g·mol-1. On the other hand, cyclohexanone led to the lowest monomer conversions (<80 %) and molecular weights (Mn<500 g·mol-1) confirming once again the unsuitability of ketone-containing solvents for enzymatic esterification and transesterification reactions. The lipase could be used up to three times, in eucalyptol as a solvent, without a significant decrease in monomer conversion or molecular weight.

Determination of indole-3-acetic acid using disposable molecularly imprinted electrochemical sensors based on bifunctional monomers.

Stainless steel sheets were coated with carbon ink to obtain disposable carbon electrodes, which were used as supports for moleculary imprinted polymer (MIP) electrochemical sensors by electropolymerizing o-phenylenediamine and o-aminophenol along with indole-3-acetic acid (IAA) as the template. After optimization, the MIP biosensors could be used for sensitive and selective detection of IAA with the limit of quantification of 0.1 µM. Our experimental results showed that stable and reproducible electrochemical responses could be achieved for the disposable MIP biosensors. This approach was successfully used for detection of IAA in different tissues of pea sprouts. This study reveals the potential of MIP electrochemical sensors in practical applications and shrinks the trench between the research and the real world.

Traditional Chinese Medicine Monomers Are Potential Candidate Drugs for Cancer-Induced Cardiac Cachexia.

BACKGROUND: Cardiovascular diseases are now the second leading cause of death among cancer patients. Heart injury in patients with terminal cancer can lead to significant deterioration of left ventricular morphology and function. This specific heart condition is known as cancer-induced cardiac cachexia (CICC) and is characterized by cardiac dysfunction and wasting. However, an effective pharmacological treatment for CICC remains elusive. SUMMARY: The development and progression of CICC are closely related to pathophysiological processes, such as protein degradation, oxidative responses, and inflammation. Traditional Chinese medicine (TCM) monomers offer unique advantages in reversing heart injury, which is the end-stage manifestation of CICC except the regular treatment. This review outlines significant findings related to the impact of eleven TCM monomers, namely Astragaloside IV, Ginsenosides Rb1, Notoginsenoside R1, Salidroside, Tanshinone II A, Astragalus polysaccharides, Salvianolate, Salvianolic acids A and B, and Ginkgolide A and B, on improving heart injury. These TCM monomers are potential therapeutic agents for CICC, each with specific mechanisms that could potentially reverse the pathological processes associated with CICC. Advanced drug delivery strategies, such as nano-delivery systems and exosome-delivery systems, are discussed as targeted administration options for the therapy of CICC. KEY MESSAGE: This review summarizes the pathological mechanisms of CICC and explores the pharmacological treatment of TCM monomers that promote anti-inflammation, antioxidation, and pro-survival. It also considers pharmaceutical strategies for administering TCM monomers, highlighting their potential as therapies for CICC.

Efficacy of traditional Chinese medicines in the treatment of solar lentigo based on network pharmacology and experimental validation.

BACKGROUND AND AIMS: Solar lentigo is a prevalent skin condition that affects a significant number of individuals. Fortunately, certain traditional Chinese medicines and monomers (TCMM) have proven effective in addressing these concerns. In this study, we evaluated the efficacy and underlying mechanism of TCMM, a combination of TCM and monomers in repairing solar lentigo. METHODS: We detected and identified the main compounds of TCM using liquid chromatography-mass spectrometry (LC-MS) and through the approach of network pharmacology, we screened drug and disease targets, visualized networks with Cytoscape software, analyzed targets via Gene ontology and KEGG, clinically validated predictions. In a mouse model, UVB-induced pigmentation was assessed, and the effects of TCMM were evaluated. A clinical trial on 30 patients validated the depigmenting agent. RESULTS: Active ingredients such as MSH, Butylated hydroxytoluen, Valerophenone, and Geranylacetone aid pigmentation treatment. One hundred and forty-three crore targets impact PI3K-Akt, MAPK signaling pathway, ect. pathways. TCMM reduced UVB-induced pigmentation, water loss, epidermal thickness, and melanin. It inhibited TYR, MITF, AKT1, VEGFA, PTGS2, TNF-α, IL-6, IL-1ß. Clinical and microscopic analysis showed significant pigmentation reduction. CONCLUSIONS: The treatment of solar lentigo can benefit from the TCMM. By targeting multiple factors and pathways, this approach offers a comprehensive and effective treatment strategy.

Modifying Polyvinylidene Chloride Resin with Fluorine Monomer and Cross-Linking Monomers.

Modified polyvinylidene chloride (PVDC) resin was prepared using octafluoropentyl methacrylate and trimethylolpropane trimethacrylate as modifying monomers through seeded emulsion polymerization. The successful incorporation of octafluoropentyl methacrylate into the PVDC resin was confirmed by Fourier transform infrared spectroscopy (FTIR) and X-ray photoelectron spectroscopy (XPS) analyses. Scanning electron microscopy (SEM), energy dispersive spectroscopy (EDS) and XPS were utilized to investigate the element distribution in the modified monomer emulsion and the mechanism of monomer modification. The results demonstrated that the fluorine monomer was reacted in the resin, and mainly concentrated on the surface of the resin. The addition of octafluoropentyl methacrylate and trimethylolpropane trimethacrylate improved the water resistance of the resin. Compared to unmodified PVDC resin, the contact angle of the modified PVDC resin increased from 89.46° to 109.51°, and the water resistance at room temperature increased from 120 to 500 h. Furthermore, the modified resin exhibited excellent mechanical properties, thermal stability, and storage stability.

Comparative efficacy of the five most common traditional Chinese medicine monomers in reducing intimal hyperproliferation in arterial balloon injury models: A network meta-analysis.

Objective: This study utilized network meta-analysis (NMA) to compare the efficacy of five commonly used traditional Chinese medicine monomers in reducing intimal hyperproliferation in arterial balloon injury models. Methods: Relevant literature up to January 2024 was systematically retrieved from seven major databases. The intima-to-media (I/M) ratio was chosen as the primary outcome measure. The risk of bias in animal studies was assessed using the SYstematic Review Centre for Laboratory Animal Experimentation (SYRCLE) tool. Statistical analysis was conducted using Stata 17 software. Results: A total of 43 studies were included in this meta-analysis. NMA results showed that in the rat model, compared to the control group, GS (SMD: 0.99, 95%CI: 1.25 to -0.73), ASIV (SMD: 1.16, 95%CI: 1.65 to -0.67), TMP (SMD: 0.68, 95%CI: 1.31 to -0.05), and TPNS (SMD: 1.36, 95%CI: 1.91 to -0.80) exhibited inhibitory effects on postoperative intimal hyperproliferation, reducing the I/M ratio. In the rabbit model, compared to the control group, TPNS (SMD: 1.23, 95%CI: 1.97 to -0.49) inhibited postoperative intimal hyperproliferation and reduced the I/M ratio. Superiority ranking analysis suggested that total Panax notoginseng saponin (TPNS) might be the most effective traditional Chinese medicine monomer in reducing intimal hyperproliferation in arterial balloon injury models, lowering the I/M ratio. Conclusion: NMA indicates that traditional Chinese medicine monomers can effectively reduce postoperative intimal hyperproliferation in arterial balloon injury models, lowering the I/M ratio, with TPNS showing optimal efficacy. However, the research on TIIA is insufficient, and the limited sample size may affect the robustness of the results. Furthermore, the majority of research on traditional Chinese medicine monomers is currently limited to the experimental stage, lacking further clinical validation. Conducting standardized animal experiments and reporting their findings can enhance the quality of evidence from animal studies, laying the foundation for future clinical trials.

A review of liquid crystal monomers (LCMs) as emerging contaminants: Environmental occurrences, emissions, exposure routes and toxicity.

The widespread occurrence of liquid crystal monomers (LCMs) in the environment has raised concerns about their persistence, bioaccumulation, and toxicity (PBT). Here we review the lifecycle of environmental LCMs, focusing on their occurrences, emission sources, human exposure routes, and toxicity. Industrial emissions from Liquid Crystal Display (LCD) manufacturing and e-waste recycling are the primary point sources of LCMs. In addition, emissions from LCD products, air conditioning units, wastewater treatment plants, and landfills contribute to environmental occurrence of LCMs as secondary sources. Dietary routes were identified as the primary exposure pathways to humans. E-waste dismantling workers and infants/children are vulnerable populations to LCMs exposure. Exposure to LCMs has been shown to potentially induce oxidative stress, metabolic disorders, and endocrine disruption. Accumulation of LCMs in the brain and liver tissues of exposed animals highlights the need for toxicokinetic studies.

Exploring Lignin Biosynthesis Genes in Rice: Evolution, Function, and Expression.

Lignin is nature's second most abundant vascular plant biopolymer, playing significant roles in mechanical support, water transport, and stress responses. This study identified 90 lignin biosynthesis genes in rice based on phylogeny and motif constitution, and they belong to PAL, C4H, 4CL, HCT, C3H, CCoAOMT, CCR, F5H, COMT, and CAD families. Duplication events contributed largely to the expansion of these gene families, such as PAL, CCoAOMT, CCR, and CAD families, mainly attributed to tandem and segmental duplication. Microarray data of 33 tissue samples covering the entire life cycle of rice suggested fairly high PAL, HCT, C3H, CCoAOMT, CCR, COMT, and CAD gene expressions and rather variable C4H, 4CL, and F5H expressions. Some members of lignin-related genes (OsCCRL11, OsHCT1/2/5, OsCCoAOMT1/3/5, OsCOMT, OsC3H, OsCAD2, and OsPAL1/6) were expressed in all tissues examined. The expression patterns of lignin-related genes can be divided into two major groups with eight subgroups, each showing a distinct co-expression in tissues representing typically primary and secondary cell wall constitutions. Some lignin-related genes were strongly co-expressed in tissues typical of secondary cell walls. Combined HPLC analysis showed increased lignin monomer (H, G, and S) contents from young to old growth stages in five genotypes. Based on 90 genes' microarray data, 27 genes were selected for qRT-PCR gene expression analysis. Four genes (OsPAL9, OsCAD8C, OsCCR8, and OsCOMTL4) were significantly negatively correlated with lignin monomers. Furthermore, eleven genes were co-expressed in certain genotypes during secondary growth stages. Among them, six genes (OsC3H, OsCAD2, OsCCR2, OsCOMT, OsPAL2, and OsPAL8) were overlapped with microarray gene expressions, highlighting their importance in lignin biosynthesis.

Selective Copolymerization from Mixed Monomers of Phthalic Anhydride, Propylene Oxide and Lactide Using Nano-Sized Zinc Glutarate.

Selective polymerization with heterogeneous catalysts from mixed monomers remains a challenge in polymer synthesis. Herein, we describe that nano-sized zinc glutarate (ZnGA) can serve as a catalyst for the selective copolymerization of phthalic anhydride (PA), propylene oxide (PO) and lactide (LA). It was found that the ring-opening copolymerization (ROCOP) of PA with PO occurs firstly in the multicomponent polymerization. After the complete consumption of PA, the ring-opening polymerization (ROP) of LA turns into the formation of block polyester. In the process, the formation of zinc-alkoxide bonds on the surface of ZnGA accounts for the selective copolymerization from ROCOP to ROP. These results facilitate the understanding of the heterogeneous catalytic process and offer a new platform for selective polymerization from monomer mixtures.

Bee Venom Reduces Early Inflammation and Oxidative Stress Associated with Lipopolysaccharide-induced Alpha-synuclein in the Substantia Nigra-striatum Axis.

Neuroinflammation and oxidative stress are important features in the pathogenesis and development of synucleinopathies, the glial activation and upregulation of pro-inflammatory and oxidative mediators induce alpha-synuclein (α-syn) accumulation. Recent studies have shown that bee venom (BV) has beneficial effects on symptoms of these neurodegenerative diseases. BV is known to exert anti-inflammatory and anti-oxidative effects. Here, we investigated the effects of BV over the different inflammatory and oxidative markers, and in the expression of α-syn and tyrosine hydroxylase (TH) in a lipopolysaccharide (LPS)-induced rat model of synucleinopathies. We examined whether BV (1.5 mg/kg by acupoint injection ST36 six times every 48 h) could change the α-syn and TH expression measured by western blotting, also, observed the activation of microglia and astrocytes by immunofluorescence, quantified the proinflammatory cytokines levels of tumoral necrosis factor-α (TNF-α) and Interleukin-1ß (IL-1ß) by enzyme-linked immunosorbent assay (ELISA), and estimated the lipid peroxidation and the activity of superoxide dismutase (SOD) and catalase (CAT) by colorimetric kits in LPS-treated rats (2.5 µg by a single dose intranigral injection) in substantia nigra (SN) and striatum (STR) brain areas. In the LPS-injected rat brain, BV treatment reduced α-syn levels and increased the TH levels. In addition, we observed lower microglia and astrocyte activation in SN and STR. Furthermore, BV decreases IL-1ß and lipid peroxidation and increases the CAT activity in the STR. These results indicate that BV can restore the α-syn and TH levels possibly by the inhibition of LPS-induced neuroinflammation and oxidation, also, these results suggest that BV could be a promising treatment option for synucleinopathies.

Hydroxyl-Functionalized Polymers of Intrinsic Microporosity and Dual-Functionalized Blends for High-Performance Membrane-Based Gas Separations.

Membrane technology has shown significant growth during the past two decades in the gas separation industry due to its energy-savings, compact and modular design, continuous operation, and environmentally benign nature. Robust materials with higher permeability and selectivity are key to reduce capital and operational cost, pushing it forward to replace or debottleneck conventional energy-intensive unit operations such as distillation. Recently designed ladder polymers of intrinsic microporosity (PIM) and polyimides of intrinsic microporosity (PIM-PI) with pores <20 Å have demonstrated excellent gas permeation performance. Here, a series of plasticization-resistant PIM-based membrane materials is reported, including the first example of a hydroxyl-functionalized triptycene- and Tröger's base-derived ladder PIM and two PIM-PI homopolymers and a series of dual-functionalized polyimide blends containing hydroxyl- and carboxyl-functionalized groups. Specifically, 4,4'-(hexafluoroisopropylidene)diphthalic anhydride (6FDA)-based PIM-PI blends demonstrated extremely high selectivity for a variety of industrially important applications. An optimized polyimide blend containing ─OH and ─COOH groups showed permselectivity values of 136 for CO2/CH4, 11.4 for O2/N2 and 636 for H2/CH4. Such extreme size-sieving capabilities are attributed to physical crosslinking induced by strong hydrogen bonding forming tightly structured polymer networks. The study provides a new general strategy for developing plasticization resistant, robust, and highly-selective PIM-based membrane materials.

Computational and Experimental Comparison of Molecularly Imprinted Polymers Prepared by Different Functional Monomers-Quantitative Parameters Defined Based on Molecular Dynamics Simulation.

BACKGROUND: In recent years, the advancement of computational chemistry has offered new insights into the rational design of molecularly imprinted polymers (MIPs). From this aspect, our study tried to give quantitative parameters for evaluating imprinting efficiency and exploring the formation mechanism of MIPs by combining simulation and experiments. METHODS: The pre-polymerization system of sulfadimethoxine (SDM) was investigated using a combination of quantum chemical (QC) calculations and molecular dynamics (MD) simulations. MIPs were prepared on the surface of silica gel by a surface-initiated supplemental activator and reducing agent atom transfer radical polymerization (SI-SARA ATRP). RESULTS: The results of the QC calculations showed that carboxylic monomers exhibited higher bonding energies with template molecules than carboxylic ester monomers. MD simulations confirmed the hydrogen bonding sites predicted by QC calculations. Furthermore, it was observed that only two molecules of monomers could bind up to one molecule of SDM, even when the functional monomer ratio was up to 10. Two quantitative parameters, namely, the effective binding number (EBN) and the maximum hydrogen bond number (HBNMax), were defined. Higher values of EBN and HBNMax indicated a higher effective binding efficiency. Hydrogen bond occupancies and RDF analysis were performed to analyze the hydrogen bond formation between the template and the monomer from different perspectives. Furthermore, under the influence of the EBN and collision probability of the template and the monomers, the experimental results show that the optimal molar ratio of template to monomer is 1:3. CONCLUSIONS: The method of monomer screening presented in this study can be extended to future investigations of pre-polymerization systems involving different templates and monomers.

Structurally diversified sesquiterpenoids from Chloranthus henryi and their neuroprotective activities on H2O2 damaged PC12 cells.

Fifteen undescribed sesquiterpenoid monomers, including six pairs of sesquiterpenoid enantiomers (1a/1b-3a/3b and 5a/5b-7a/7b) and three analogues (4, 8, and 9), together with two known sesquiterpenoid dimers (10 and 11) were isolated from the whole plant of Chloranthus henryi Hemsl. Their structures were characterized by spectroscopic data analysis, ECD calculations, and single crystal X-Ray diffractions. Compounds 1a and 1b were highly aromatic cadinane-type sesquiterpenoids. At a concentration of 10 µM, compounds 8, 10, and 11 exhibited potent neuroprotective activity against H2O2-induced PC12 cell damage. Compounds 10 and 11 significantly decreased the level of ROS. In addition, compound 11 increased the levels of p-AMPK, p-SIRT1, and SIRT3 in the H2O2-induced PC12 cell damage via activated the AMPK/SIRT signaling pathway.