Transparent mechanism of salted egg (white) hierarchically and synergistically driven by NaCl, NaOH and thermal treatment: Based on empirical data and molecular simulation.

Currently, it is a challenge that the yolk in salted preserved egg tends to preserved egg yolk due to extreme NaOH treatment. Therefore, NaCl, NaOH and thermal were successfully used to prepare a new translucent salted quail egg (T-SQE), which combined advantages of preserved egg white with transparent appearance and salted egg yolk with unique texture and odour. Moreover, transparency of opaque gel (Transmittance: 0.09 %) subjected to NaCl and thermal was demonstrated to be improved under the synergistic effect of NaOH (8.55 %) via empirical data and molecular simulation. The disordered and dense network in opaque T-SQE induced by NaCl and thermal tended to form an ordered, porous and transparent structure in presence of NaOH, with more immobilized water that was poorly bonded to protein, larger radius of gyration and lower hydrophobic interaction. This research provides new insight into understanding the influence of hierarchy and synergism on transparency of egg products.

Comparison of Power Ultrasound and NALC-NaOH Decontamination Methods for Stool Mycobacterial Culture: A Prospective Study.

Stool samples have been reported to be useful for the diagnosis of pulmonary tuberculosis (PTB), especially in patients who are unable to produce sputum. However, contamination limits the usefulness of stool specimens in mycobacterial culture. In this study, a novel decontamination method of power ultrasound (PU) was evaluated for mycobacterial isolation from suspected PTB cases. Stool samples (n = 650) were collected, and each sample was divided into approximately three equal groups. In addition to an AFB smear (Auramine O method), the stool samples were treated using different decontamination methods (NaOH-NALC vs. PU methods). The sensitivity (calculated against CRS) and contamination rates between the two methods were compared using McNemar's test. Of the 650 samples, 32 (4.92%) stool samples treated with the NaOH-NALC method were culture-positive, including Mycobacterium tuberculosis (M.TB; n = 21, 3.23%) and nontuberculous mycobacteria (NTM; n = 11, 1.69%). Sixty-one (9.38%) stool samples treated with the PU method were culture-positive, including M.TB (n = 37, 5.69%) and NTM (n = 24, 3.69%). Statistical analysis showed that a significant difference was found in the isolation rate of M.TB and NTM between the two methods (p < 0.05). Additionally, compared with the NALC-NaOH method (19.07%), stool samples treated with the PU method (13.23%) had a significantly lower contamination rate (p < 0.05). In conclusion, our findings suggest that the utilization of the PU method as a novel decontamination technique could significantly enhance the isolation rates of both NTM and M.TB when stool specimens are employed for culture. Compared to the NaOH-NALC method, this approach proves to be more effective in facilitating stool mycobacterial culture.

A SEM/EDS evaluation of debris removal of used rotary Ni-Ti endodontic files by four different cleaning solutions.

Purpose: The aim of this study was to compare the efficacies levels of four cleaning solutions for removing debris from rotary Nickel-Titanium (Ni-Ti) endodontic instruments. Materials and methods: Twelve instruments that fractured during ex vivo instrumentation were used. Fractured surfaces were investigated by SEM before and after 3, 6 and 9 min of ultrasonic cleaning in 17 % EDTA.3NaOH (Group A), 2.5 % NaOCl (Group B), Dentasept 3H Rapide (Group C) and ZymeX™ (Group D) solutions. EDS analyses of selected files from all four groups of untreated and ultrasonically cleaned samples were performed to assess the elemental composition of the alloy surfaces. Results: SEM analysis revealed that after 9 min of ultrasonic agitation, all four investigated solutions had cleaned fractured surfaces. However, some low-atomic-number regions exhibited random distributions on the fractured surfaces. EDS analyses indicated that only C was retained on surface after 9 min of ultrasonic cleaning. This finding was common in all tested groups. Conclusions: All four investigated solutions substantially removed debris from the surfaces of the Ni-Ti files and were considered appropriate for clinical practice.

A comprehensive approach for the recycling of anode materials from spent lithium-ion batteries: Separation, lithium recovery, and graphite reutilization as environmental catalyst.

The effective recovery of valuables from anodes coming from spent lithium-ion batteries (LIBs) is of great importance to ensure resource supply and reduce the environmental burden for recycling. In this work, a simple and low energy consumption roasting method was proposed by employing low-temperature eutectic NaOH-KOH as reaction medium, in order to simultaneously separate graphite from Cu foils, extract lithium from it and set it up for reuse as environmental catalyst through one-step water washing process. Our results show that polyvinylidene difluoride (PVDF) was effectively deactivated due to dehydrofluorination/carbonization at a relatively low temperature and short time (150 °C, 20 min) when a mass ratio of 1:1 for eutectic NaOH-KOH to spent LIBs anodes was used, yielding 97.3 % of graphite detached. Moreover, a remarkable lithium extraction efficiency of 93.2 % was simultaneously obtained. Afterwards, the reusability of the recycled graphite was tested by employing it as a catalyst for the treatment of a contaminant organic dye (Rhodamine B) in the presence of NaClO. Our results show that a superior NaClO activation was obtained with the addition of recycled graphite, being this fact closely associated to the abundant active sites formed during the long-term charging/discharging cycles in the original battery. The alkaline-mediated roasting process presented in this work presents an energy-saving scheme to efficiently recover useful components from spent anodes, whereas the reusability example highlighted a useful option for repurposing the severely damaged graphite as an environmental catalyst rather than disposing it in landfills, turning waste into a valuable material.

Sustainable All-Cellulose Biocomposites from Renewable Biomass Resources Fabricated in a Water-Based Processing System by the Vacuum-Filtration-Assisted Impregnation Method.

The increasing awareness of global ecological concerns and the rising sustainability consciousness associated with the manufacturing of non-renewable and non-biodegradable composite materials have led to extensive research on product and process developments of more sustainable, environmentally friendly, and fully biodegradable biocomposites for higher-value end-use applications. All-cellulose composites (ACCs) are an emerging class of biocomposites, which are produced utilizing solely cellulose as a raw material that is derived from various renewable biomass resources, such as trees and plants, and are assessed as fully biodegradable. In this study, sustainable ACCs were fabricated for the first time based on the full dissolution of commercially available sulfite dissolving (D) pulps as a matrix with concentrations of 1.5 wt.% and 2.0 wt.% in an aqueous NaOH-urea solvent, and they were then impregnated on/into the pre-fabricated birch (B), abaca (A), and northern softwood (N) fiber sheets as reinforcements by the vacuum-filtration-assisted impregnation approach. This research aimed to investigate the effects of the impregnated cellulose matrix concentrations and types of the utilized cellulose fiber reinforcements (B, A, N) on the morphological, crystalline, structural, and physio-mechanical properties of the ACCs. The highest degrees of improvements were achieved for tensile strength (+532%, i.e., from 9.24 MPa to 58.04 MPa) and strain at break of the B fiber-reinforced ACC B1.5 (+446%, i.e., from 1.36% to 4.62%) fabricated with vacuum impregnation of the 1.5 wt.% cellulose matrix. Noticeably, the greatest improvements were attained in strain at break of the A and N fiber-reinforced ACCs A2.0 (+218%, i.e., from 4.44 % to 14.11%) and N2.0 (+466%, i.e., 2.59% to 14.65%), respectively, produced with vacuum impregnation of the 2.0 wt.% cellulose matrix. The study highlights the diverse properties of the all-cellulose biocomposite materials that could, expectedly, lead to further development and research for upscaled production of the ACCs.

Effects of Curing Temperature on Expansion of Concrete Due to ASR.

In the laboratory study of alkali-silica reaction (ASR), models attempt to predict the service life of concrete due to ASR by correlating the performance of concrete at high and low temperatures. However, the consequences of elevating temperature are not so encouraging. In this paper, the influence of temperature on the expansion of 2-graded concrete and 3-graded concrete caused by ASR was investigated by curing the concrete under different temperatures ranging from 40 °C to 80 °C. Increased temperature resulted in rapid expansion at the early stages, but the expansion rate of concrete prisms cured at the higher temperatures (70 °C and 80 °C) was slowed down at the later stages, and concrete prisms cured at 50 °C or 60 °C showed the highest expansions during the experimental period. The chemical analysis results of the pore solution expressed from the concrete show that the ASR expansion is significantly influenced by the [OH-]: the decrease in [OH-] leads to the retardation of the ASR expansion. The decrease in [OH-] is attributed to the consumption of OH- ions for the alkali-silica reaction and the decrease in activity of NaOH(aq) influenced by the temperature. For large cross-section specimens, the OH- within the concrete for alkali-silica reactions cannot be effectively compensated by the external alkali solution. In the accelerated test to evaluate ASR for large cross-section specimens, a curing temperature of less than 60 °C is suggested. This study provides critical insights into the temperature dependency of ASR expansion of concrete, offering a curing temperature range for developing predictive models of ASR expansion under varied environmental conditions.

Developing a method to measure bioavailable phosphorus in river water via simultaneous multisample ultrasonic extraction.

To reduce aquatic eutrophication, measurements of bioavailable phosphorus (BAP) rather than total phosphorus (TP) are deemed critical. However, current methods require much time to separate sediments from river water, which limits the routine measurement of BAP in rivers. Therefore, in this study, a simultaneous multisample ultrasonic extraction method is proposed to directly measure total BAP (TBAP) in river water without the separation of sediment and water. Spike-and-recovery assessments showed that at least three extractions are required to maintain efficiency. A process including 2-min extraction time and three extractions was suggested. The concentrations of TBAP extracted by this process showed no significant differences with the spike calculations. Furthermore, river water TBAP was quantified using the conventional and proposed method to examine the practicality of using the proposed method for simultaneous multisample ultrasonic extraction and to evaluate its adaptability to actual river water analysis. The extracted concentrations matched those obtained using the conventional method, in which total BAP is calculated as the sum of dissolved BAP and particulate BAP; no significant difference was observed between the concentrations. Ultrasonic extraction was considerably less time-consuming than the conventional method because more samples could be analyzed during a single run. Therefore, the simultaneous multisample ultrasonic extraction method proposed in this study can be used to directly quantify total BAP in river water.

Mitigation of ammonia and hydrogen sulfide emissions during aerobic composting of laying hen waste through NaOH-modified biochar.

The impact of NaOH-modified biochar on the release of NH3 and H2S from laying hens' manure was examined for 44 days, using a small-scale simulated aerobic composting system. The findings revealed that the NaOH-modified biochar reduced NH3 and H2S emissions by 40.63% and 77.78%, respectively, compared to the control group. Moreover, the emissions of H2S were significantly lower than those of the unmodified biochar group (p < 0.05). The increased specific surface area and microporous structure of the biochar, as well as the higher content of alkaline and oxygenated functional groups, were found to facilitate the adsorption of NH3 and H2S. This enhanced adsorption capability was the primary reason for the significant reduction in NH3 emissions. Furthermore, during the high-temperature phase of composting, there was a notable alteration in the microbial community. The abundance of Limnochordaceae, Savagea, and IMCC26207 increased significantly which aided in the conversion of H2S to stable sulfate. These microorganisms also influenced the abundance of functional genes involved in sulfur metabolism, thereby inhibiting cysteine synthesis, along with the decomposition and conversion of sulfate to sulfite. This led to a significant decrease in H2S emissions. This study provides valuable data for the selection of deodorizers in the composting process of egg-laying hens. The results have significant implications for the application of NaOH-modified biochar for odor reduction in aerobic composting processes.

Fast, Easy, and Comprehensive Techniques for Microscopic Observations of Fungal and Oomycete Organisms Inside the Roots of Herbaceous and Woody Plants.

The roots of herbaceous and woody plants growing in soil are complex structures that are affected by both natural and artificial fungal colonization to various extents. To obtain comprehensive information about the overall distribution of fungi or oomycetes inside a plant root system, rapid, effective, and reliable screening methods are required. To observe both fine roots, i.e., a common site for penetration of fungi and oomycetes, and mature roots, different techniques are required to overcome visual barriers, such as root browning or tissue thickening. In our protocol, we propose using fast, cost-effective, and non-harmful methods to localize fungal or oomycete structures inside plant roots. Root staining with a fluorescent dye provides a quick initial indication of the presence of fungal structures on the root surfaces. The protocol is followed by clearing and staining steps, resulting in a deeper insight into the root tissue positioning, abundance, and characteristic morphological/reproductive features of fungal or oomycete organisms. If required, the stained samples can be prepared by using freeze-drying for further observations, including advanced microscopic techniques. Key features • The protocol enhances tissue-clearing techniques employing KOH or NaOH and is applicable to a broad range of roots from different plant species. • Hydroxides are mixed with hydrogen peroxide to obtain an efficient bleaching solution, which effectively clears roots without causing significant tissue damage. • The protocol could also be used for staining of fungi or oomycetes localized both on the root surface or inside the root tissues. • Simple combination of non-fluorescent methyl blue and fluorescent solophenyl flavine dyes allows the observation of fungal organisms in both brightfield and fluorescence microscopy.

Study of Cellulose Dissolution in ZnO/NaOH/Water Solvent Solution and Its Temperature-Dependent Effect Using Molecular Dynamics Simulation.

Cellulose is a biopolymer with numerous advantages that make it an ecological, economical, and high-performing choice for various applications. To fully exploit the potential of cellulose, it is often necessary to dissolve it, which poses a current challenge. The aqueous zinc oxide/sodium hydroxide (ZnO/NaOH/Water) system is a preferred solvent for its rapid dissolution, non-toxicity, low cost, and environmentally friendly nature. In this context, the behavior of cellulose chains in the aqueous solution of ZnO/NaOH and the impact of temperature on the solubility of this polymer were examined through a molecular dynamics simulation. The analysis of the root means square deviation (RMSD), interaction energy, hydrogen bond curves, and radial distribution function revealed that cellulose is insoluble in the ZnO/NaOH solvent at room temperature (T = 298 K). Decreasing the temperature in the range of 273 K to 268 K led to a geometric deformation of cellulose chains, accompanied by a decrease in the number of interchain hydrogen bonds over the simulation time, thus confirming the solubility of cellulose in this system between T = 273 K and T = 268 K.

Inhibitory effects of glutathione peroxidase on microbial spoilage of crayfish (Procambarus clarkii) during refrigerated storage.

The variety of enzyme-based biological preservatives is limited. This study evaluated the effects of glutathione peroxidase (GSH-Px) on the quality of crayfish during refrigerated storage by measuring the pH, total volatile basic nitrogen, trimethylamine, and microbial contamination in crayfish muscle simulation system. The results revealed that 0.3% GSH-Px (CK3) not only suppressed the degradation of nitrogenous substances but also decreased the contamination levels of total viable, Enterobacteriaceae, and Pseudomonas counts (P < 0.05). Furthermore, the populations of Lactococcus, Aeromonas, and Massilia differed in the CK3 group compared to the other groups (P < 0.05) at the end of the storage (day 15). Moreover, the principal coordinate analysis showed that the colony composition of CK3 stored for 15 days was similar to that of the control group stored for 10 days. Therefore, GSH-Px exhibits antibacterial activity against Gram-negative bacteria and has good application potential in freshwater aquatic product preservation.

Enhancing biomass conservation and enzymatic hydrolysis of sweet sorghum bagasse by combining pretreatment with ensiling and NaOH.

Lignocellulosic pretreatment is an important stage in biomass utilization, which usually requires high input. In this study, a low-cost method using combined ensiling and NaOH was developed for lignocellulosic pretreatment. Sweet sorghum bagasse (SSB) was ensiled for 21 days and then treated with diluted NaOH (0%, 1%, and 2%) for fermentation. The results showed that the application of Lactobacillus plantarum (L) reduced fermentation losses of the silages, mainly low water-soluble carbohydrate (WSC) and ammonia nitrogen loss. Meanwhile, the application of Lactobacillus plantarum and ensiling enzyme (LE) promoted lignocellulosic degradation, as evidenced by low neutral detergent fiber (NDF), acid detergent fiber (ADF), lignin (ADL), and hemicellulosic (HC) contents. The dominant bacterial genera were Lactobacillus, uncultured_bacterium_f_Enterobacteriaceae, and Pantoea after silage, which corresponded to the higher lactic acid and acetic contents and lower pH. The reducing sugar yields of SSB increased after combined pretreatment of silage and NaOH and were further enhanced by the 2% NaOH application, as evidenced by the high reducing sugar yield and microstructure damage, especially in the L-2% NaOH group and the LE-2% NaOH group, in which the reducing sugar yields were 87.99 and 94.45%, respectively, compared with those of the no additive control (CK)-0 NaOH group. Therefore, this study provides an effective method for SSB pretreatment to enhance biomass conservation.

Enhanced adsorption of dye wastewater by low-temperature combined NaOH/urea pretreated hydrochar: Fabrication, performance, and mechanism.

The highly stable biomass structure formed by cellulose, hemicellulose, and lignin results in incomplete conversion and carbonization under hydrothermal conditions. In this study, pretreated corn straw hydrochar (PCS-HC) was prepared using a low-temperature alkali/urea combination pretreatment method. The Mass loss rate of cellulose, hemicellulose, and lignin from pretreated biomass, as well as the effects of the pretreatment method on the physicochemical properties of PCS-HC and the adsorption performance of PCS-HC for alkaline dyes (rhodamine B and methylene blue), were investigated. The results showed that the low-temperature NaOH/urea pretreatment effectively disrupted the stable structure formed by cellulose, hemicellulose, and lignin. NaOH played a dominant role in solubilizing cellulose and the combination of low temperature and urea enhanced the ability of NaOH to remove cellulose, hemicellulose, and lignin. Compared to the untreated hydrochar, PCS-HC exhibited a rougher surface, a more abundant pore structure, and a larger specific surface area. The unpretreated hydrochar exhibited an adsorption capacity of 64.8% for rhodamine B and 66.32% for methylene blue. However, the removal of rhodamine B and methylene blue by PCS-BC increased to 89.12% and 90.71%, respectively, under the optimal pretreatment conditions. The PCS-HC exhibited a favorable adsorption capacity within the pH range of 6-9. However, the presence of co-existing anions such as Cl-, SO42-, CO32-, and NO3- hindered the adsorption capacity of PCS-HC. Among these anions, CO32- exhibited the highest level of inhibition. Chemisorption, including complexation, electrostatic attraction, and hydrogen bonding, were the primary mechanism for dye adsorption by PCS-HC. This study provides an efficient method for utilizing agricultural waste and treating dye wastewater.

Experimental Study on Geopolymerization of Lunar Soil Simulant under Dry Curing and Sealed Curing.

The construction of lunar surface roads is conducive to improving the efficiency of lunar space transportation. The use of lunar in situ resources is the key to the construction of lunar bases. In order to explore the strength development of a simulated lunar soil geopolymer at lunar temperature, geopolymers with different sodium hydroxide (NaOH) contents were prepared by using simulated lunar regolith materials. The temperature of the high-temperature section of the moon was simulated as the curing condition, and the difference in compressive strength between dry curing and sealed curing was studied. The results show that the high-temperature range of lunar temperature from 52.7 °C to 76.3 °C was the suitable curing period for the geopolymers, and the maximum strength of 72 h was 6.31 MPa when the NaOH content was 8% in the sealed-curing mode. The 72 h strength had a maximum value of 6.87 MPa when the NaOH content was 12% under dry curing. Choosing a suitable solution can reduce the consumption of activators required for geopolymers to obtain unit strength, effectively reduce the quality of materials transported from the Earth for lunar infrastructure construction, and save transportation costs. The microscopic results show that the simulated lunar soil generated gel substances and needle-like crystals under the alkali excitation of NaOH, forming a cluster and network structure to improve the compressive strength of the geopolymer.

Chitin nanofibrils assisted 3D printing all-chitin hydrogels for wound dressing.

The direct ink writing technique used in 3D printing technology is generally applied to designing biomedical hydrogels. Herein, we proposed a strategy for preparing all-chitin-based inks for wound dressing via direct ink writing technique. The ß-chitin nanofibers (MACNF) with a high aspect ratio were applied as a nanofiller to modulate the rheological properties of the alkaline dissolved chitin solution. The printing fidelity significantly depends on the MACNF introduction amount to the composite ink. 5-10 wt% MACNF ratio showed superior printing performance. The printed scaffold showed a uniform micron-sized pore structure and a woven network of nanofibers. Due to the good biocompatibility of chitin and the stereoscopic spatial skeleton, this scaffold showed excellent performance as a wound dressing, which can promote cell proliferation, collagen deposition and the angiogenesis of wounds, demonstrating its potential in biomedical applications. This approach successfully balanced the chitinous printability and biofunctions.

[Study on NaOH improving the surface morphology of three-dimensional printed poly- L- lactic acid mesh scaffolds].

Objective: To explore the effect of NaOH on the surface morphology of three-dimensional (3D) printed poly- L-lactic acid (PLLA) mesh scaffolds. Methods: The 3D printed PLLA mesh scaffolds were prepared by fused deposition molding technology, then the scaffold surfaces were etched with the NaOH solution. The concentrations of NaOH solution were 0.01, 0.1, 0.5, 1.0, and 3.0 mol/L, and the treatment time was 1, 3, 6, 9, and 12 hours, respectively. There were a total of 25 concentration and time combinations. After treatment, the microstructure, energy spectrum, roughness, hydrophilicity, compressive strength, as well as cell adhesion and proliferation of the scaffolds were observed. The untreated scaffolds were used as a normal control. Results: 3D printed PLLA mesh scaffolds were successfully prepared by using fused deposition molding technology. After NaOH etching treatment, a rough or micro porous structure was constructed on the surface of the scaffold, and with the increase of NaOH concentration and treatment time, the size and density of the pores increased. The characterization of the scaffolds by energy dispersive spectroscopy showed that the crystal contains two elements, Na and O. The surface roughness of NaOH treated scaffolds significantly increased ( P<0.05) and the contact angle significantly decreased ( P<0.05) compared to untreated scaffolds. There was no significant difference in compressive strength between the untreated scaffolds and treated scaffolds under conditions of 0.1 mol/L/12 h and 1.0 mol/L/3 h ( P>0.05), while the compression strength of the other treated scaffolds were significantly lower than that of the untreated scaffolds ( P<0.05). After co-culturing the cells with the scaffold, NaOH treatment resulted in an increase in the number of cells on the surface of the scaffold and the spreading area of individual cells, and more synapses extending from adherent cells. Conclusion: NaOH treatment is beneficial for increasing the surface hydrophilicity and cell adhesion of 3D printed PLLA mesh scaffolds.

The Effects of Ellagic Acid on Experimental Corrosive Esophageal Burn Injury.

This study aimed to investigate the antioxidant effect of Ellagic acid (EA) on wound healing in sodium hydroxide (NaOH)-induced corrosive esophageal burn injury. The interaction networks and functional annotations were conducted using Cytoscape software. A total of 24 Wistar albino rats were divided into control, corrosive esophageal burn (CEB) and CEB + EA groups. Burn injury was created by 20% NaOH and 30 mg/kg EA was per oral administered to rats. At the end of the 28-day experimental period, Malondialdehyde (MDA) content was measured. Esophageal tissue samples were processed for histological staining. The EA-target interaction network was revealed to be involved in regulating crucial cellular mechanisms for burn wound healing, with epidermal growth factor (EGF) identified as a central mediator. An increase in animal weight in the CEB + EA group was observed in the EA-treated group after CEB injury. Burn injury increased MDA content, but EA treatment decreased its level after CEB injury. Stenosis index, collagen degeneration, inflammation, fibrosis and necrosis levels were increased after CEB injury. EA treatment improved histopathology in the CEB + EA group compared to the CEB group. The expression of EGF was decreased in the CEB group but upregulated in the EA-treated group, suggesting a potential involvement of EA in cellular processes and tissue regeneration. EA, through its antioxidative and tissue regenerative properties, significantly contributes to alleviating the adverse effects of CEB injury, promoting wound healing.

The Improvement of the Tribological Behaviour of Chemically Treated Abaca Fibre-Reinforced Polymer Composites.

Abaca fibres that have excellent mechanical properties are widely applied in the production and preparation of eco-friendly polymer composites as reinforcement materials. However, the weak interfacial bonding property of the abaca fibre and composite matrix limits the further extended application of abaca fibre-reinforced polymer composites. In this research, the findings demonstrate that, compared to raw abaca fibres, the interfacial shear strength (IFSS) value between the treated fibre and matrix is improved by 32% to 86%. Moreover, chemically treated abaca fibres could not only improve the wear resistance of the polymer composites, but also could promote the formation of primary and secondary plateaus. The best wear resistance behaviour was demonstrated by the sample with abaca fibres treated with 3% NaOH and 5% silane solutions, which had a maximum reduction in the sum wear rate of 28.44%. This research will provide detail on theoretical guidance and technical support for the development of eco-friendly natural fibre-reinforced polymer composites.

Targeted hyperalkalization with NaOH-loaded starch implants enhances doxorubicin efficacy in tumor treatment.

High-alkali treatment using sodium hydroxide (NaOH) injection can be a therapeutic approach for killing tumor cells. Alkalization can damage cellular structures and lead to cell death. Increased alkalinity can also enhance the efficacy of certain chemotherapeutic drugs such as doxorubicin (DOX). In this study, NaOH-loaded starch implants (NST implants) were used to induce hyperalkalization (increase pH) in the tumor environment, thereby inducing necrosis and enhancing the effects of DOX. NaOH is a strongly alkaline substance that can increase the pH when injected into a tumor. However, the administration of NaOH can have toxic side effects because it increases the pH of the entire body, not just at the tumor site. To overcome this problem, we developed an injectable NST implant, in which NaOH can be delivered directly into the tumor. This study showed that NST implants could be easily administered intratumorally in mice bearing 4T1 tumors and that most of the NaOH released from the NST implants was delivered to the tumors. Although some NaOH from NST implants can be systemically absorbed, it is neutralized by the body's buffering effect, thereby reducing the risk of toxicity. This study also confirmed both in vitro and in vivo that DOX is more effective at killing 4T1 cells when alkalized. It has been shown that administration of DOX after injection of an NST implant can kill most tumors. Systemic absorption and side effects can be reduced using an NST implant to deliver NaOH to the tumor. In addition, alkalinization induced by NST implants not only exerts anticancer effects but can also enhance the effect of DOX in killing cancer cells. Therefore, the combination of NaOH-loaded starch implants and DOX treatment has the potential to be a novel therapy for tumors.

Structure and properties of sulfopropyl chitins prepared in NaOH/urea aqueous solutions.

A series of sulfopropyl chitins (SCs) with the degree of substitution (DS) ranging from 0.11 to 0.40 and high degree of acetylation (DA ≥ 0.82) were homogeneously synthesized by reacting chitin with sodium 3-chloro-2-hydroxypropanesulfonate (SCHPS) in NaOH/urea aqueous solutions under mild conditions. The structure and properties of SCs were characterized with 1H NMR, CP/MAS 13C NMR, FT-IR, XPS, XRD, elemental analysis, GPC, AFM, ζ-potential and rheological measurements. The mild reaction conditions resulted in less N-deacetylation and uniform structures with substitution occurring predominantly at the hydroxyl groups at C6 of the chitin backbone. The DS value for SC soluble in dilute alkali solution is as low as 0.16. SC exhibited good solubility in distilled water when its DS value reached 0.28. Water-soluble SCs self-assembled in water into micelles by the attractive hydrophobic and hydrogen-bonding interactions between polymer chains. The water-insoluble SC-2 with lower DS could thermally form smart hydrogels at body temperature (37 °C) in physiological condition. Moreover, the SCs exhibited good biocompatibility, making them suitable for biomedical applications.