Photoelectrochemical sensor for nitrite determination based on the etching of BiOCl/Zn0.5Cd0.5S.

A rapid photoelectrochemical (PEC) sensor was constructed for nitrite detection in food based on the one-step chemical etching strategy of BiOCl/Zn0.5Cd0.5S (BOC/ZCS) nanocomposites by nitrite. BOC/ZCS heterojunction was prepared by a simple coprecipitation method, and it was found that BOC/ZCS showed significant photoelectrochemical (PEC) activity. The results of this study confirmed that the decrease in the photocurrent of the sensor was linked to the etching of ZCS by nitrite under acidic conditions. Under optimized conditions, the BOC/ZCS-based PEC sensor showed good analytical properties for detecting nitrite, with linear ranges of 1-100 µM and 100-600 µM. The detection limit of the sensor was 0.41 µM (S/N = 3). Excellent repeatability, reproducibility, low background noise, and immunity to interference were demonstrated using the proposed system, and satisfactory results were achieved for the nitrite assay using real samples. These results demonstrate a new method for nitrite detection developed using the proposed PEC sensor.

Advances and recent trends in plant-based materials and edible films: a mini-review.

Plant-based materials and edible films have emerged as promising alternatives to conventional packaging materials, offering sustainable and environmentally friendly solutions. This mini-review highlights the significance of plant-based materials derived from polysaccharides, proteins, and lipids, showcasing their renewable and biodegradable nature. The properties of edible films, including mechanical strength, barrier properties, optical characteristics, thermal stability, and shelf-life extension, are explored, showcasing their suitability for food packaging and other applications. Moreover, the application of 3D printing technology allows for customized designs and complex geometries, paving the way for personalized nutrition. Functionalization strategies, such as active and intelligent packaging, incorporation of bioactive compounds, and antimicrobial properties, are also discussed, offering additional functionalities and benefits. Challenges and future directions are identified, emphasizing the importance of sustainability, scalability, regulation, and performance optimization. The potential impact of plant-based materials and edible films is highlighted, ranging from reducing reliance on fossil fuels to mitigating plastic waste and promoting a circular economy. In conclusion, plant-based materials and edible films hold great potential in revolutionizing the packaging industry, offering sustainable alternatives to conventional materials. Embracing these innovations will contribute to reducing plastic waste, promoting a circular economy, and creating a sustainable and resilient planet.

Gelatin-carboxymethyl cellulose/iron-based metal-organic framework nanocomposite hydrogel as a promising biodegradable fertilizer release system: Synthesis, characterization, and fertilizer release studies.

Application of fertilizers is a routine method in agriculture to increase the fertility of plants However, conventional fertilizers have raised serious health and environmental problems in recent years. Therefore, the development of biodegradable superabsorbent hydrogels based on natural polymers with the capability for fertilizer controlled release has attracted much interest. In the current research, a novel nanocomposite hydrogel based on gelatin and carboxymethyl cellulose polymers enriched with an iron based metal- organic framework (MIL-53 (Iron)) was prepared. The prepared nanocomposite hydrogel was loaded with NPK fertilizer to obtain a slow release fertilizer system. The structural properties of the nanocomposite hydrogel were investigated using FTIR, XRD, and SEM techniques. The swelling and fertilizer release behavior of the nanocomposite hydrogel were evaluated in conditions. Results showed that by adding iron-based metal organic framework to the hydrogel matrix, the water absorption capacity of the hydrogel system was increased to 345.8 (g/g). Fertilizer release studies revealed that the release of fertilizer from the nanocomposite matrix has a slow and continuous release pattern. Therefore, the synthesized nanocomposite has an appropriate strength and high potential to be used as a slow-release fertilizer system.

Selective and stable visible-light-prompted scavenger-free photoelectrochemical strategy based on a ternary ErVO4/P@g-C3N4/SnS2 nanocomposite for the detection of lead ions in different water samples.

Lead ions (Pb2+) are heavy metal environmental pollutants that can significantly impact biological health. In this study, the synthesis of a ternary nanocomposite, ErVO4/P@g-C3N4/SnS2, was achieved using a combination of hydrothermal synthesis and mechanical grinding. The as-fabricated photoelectrochemical (PEC) sensor was found to be an ideal substrate for Pb2+ detection with high sensitivity and reliability. The ErVO4/P@g-C3N4/SnS2/FTO was selected as the substrate because of its remarkable and reliable photocurrent response. The Pb2+ sensor exhibited a low detection limit of 0.1 pM and a broad linear range of 0.002-0.2 nM. Moreover, the sensor exhibited outstanding stability, selectivity, and reproducibility. In real-time applications, it exhibited stable recovery and a low relative standard deviation, ensuring reliable and accurate measurements. The as-prepared PEC sensor was highly stable for the detection of Pb2+ in different water samples. This promising characteristic highlights its significant potential for use in the detection of environmental pollutants.

Combined miR-181a-5p and Ag Nanoparticles are Effective Against Oral Cancer in a Mouse Model.

Purpose: Oral squamous cell carcinoma is the most common type of malignant tumor in the head and neck region. Despite advancements, metastasis and recurrence rates remain high, and patient survival has not significantly improved. Although miRNA therapies are promising for cancer gene therapy, their applications in treating oral cancer are limited. Targeted medication delivery systems based on nanotechnology offer an efficient way to enhance oral cancer treatment efficacy. Methods: We synthesized nanosilver (AgNPs) and loaded them with the tumor suppressor miR-181a-5p. In vitro experiments were conducted to investigate the inhibitory effects of AgNPs and their composites on the malignant behavior of oral cancer cell lines. The xenograft experiment was utilized to examine their effects on tumorigenesis and the potential molecular mechanisms involved. Results: The nanosilver exhibited a spherical morphology with a size distribution ranging from 50 to 100 nm. They exhibited a distinct absorption peak at 330 nm and could be excited to emit green fluorescence. The biocompatible AgNPs effectively shielded miRNA from degradation by RNase and serum. The nanocomposites significantly inhibited the proliferation, invasion, migration, and colony formation of oral cancer cell lines. Notably, treatment with the nanocomposites resulted in substantial tumor growth suppression in the xenograft model. Mechanistically, these composites directly targeted BCL2 and exerted their antitumor effects by suppressing the ß-catenin signaling pathway and other downstream genes without inducing acute toxicity. Conclusion: Collectively, the findings demonstrate that the miR-181a-5p/AgNPs combination significantly impedes the growth and progression of oral cancer both in vitro and in vivo, highlighting a pivotal role for the ß-catenin signaling pathway. This multifaceted approach holds promise as a prospective therapeutic strategy for oral cancer management in the future.

Nanocomposite Hydrogel for Real-Time Wound Status Monitoring and Comprehensive Treatment.

Current skin sensors or wound dressings fall short in addressing the complexities and challenges encountered in real-world scenarios, lacking adequate capability to facilitate wound repair. The advancement of methodologies enabling early diagnosis, real-time monitoring, and active regulation of drug delivery for timely comprehensive treatment holds paramount significance for complex chronic wounds. In this study, a nanocomposite hydrogel is devised for real-time monitoring of wound condition and comprehensive treatment. Tannins and siRNA containing matrix metalloproteinase-9 gene siRNA interference are self-assembled to construct a degradable nanogel and modified with bovine serum albumin. The nanogel and pH indicator are encapsulated within a dual-crosslinking hydrogel synthesized with norbornene dianhydride-modified paramylon. The hydrogel exhibited excellent shape adaptability due to borate bonding, and the click polymerization reaction led to rapid in situ curing of the hydrogel. The system not only monitors pH, temperature, wound exudate alterations, and peristalsis during wound healing but also exhibits hemostatic, antimicrobial, anti-inflammatory, and antioxidant properties, modulates macrophage polarization, and facilitates vascular tissue regeneration. This therapeutic approach, which integrates the monitoring of pathological parameters with comprehensive treatment, is anticipated to address the clinical issues and challenges associated with chronic diabetic wounds and infected wounds, offering broad prospects for application.

Improvement of photocatalytic ammonia production of cobalt ferrite nanoparticles utilizing microporous ZSM-5 type ferrisilicate zeolite.

The development of decarbonized synthesis approaches is a critical step in the fabrication of ammonia, an indispensable chemical and a potential carbon-neutral energy carrier. In this regard, the photocatalytic production technology has gained ample attention as a sustainable alternative to energy-intensive and environmentally detrimental Haber-Bosch process. Here, we present cobalt ferrite nanoparticles supported on microporous ZSM-5 type ferrisilicate zeolite as a desirable novel photocatalyst for the ammonia generation. The zeolite introduced as a microporous support increasing the catalytically active sites. A straightforward one-pot sol-gel method was used to synthesize cobalt ferrite (CoFe2O4) and CoFe2O4/ferrisilicate (CF/FS) nanocomposites with various weight percentages (10, 25 and 50%) of CoFe2O4. The photocatalytic performances of the samples in the production of ammonia were investigated under visible light irradiation. The highest rate of NH4+ production (484.74 µmol L-1 h-1) was achieved using the CF50%/FS photocatalyst. The distribution of < 50 nm-sized CoFe2O4 nanoparticles on the surface of the zeolite, as demonstrated by TEM images, and extensive BET surface areas are presented as convincing evidences for the improved photocatalytic activity paticularly in CF50%/FS photocatalyst.

A novel technique including two steps for modulus prediction in polymer halloysite nanotube composites.

A two-step methodology has been developed utilizing the models of Paul and Takayanagi to determine the modulus of polymer halloysite nanotube (HNT) products. Initially, HNTs and the adjacent interphase are considered as pseudoparticles, and their modulus is evaluated using the Paul model. Subsequently, the modulus of a nanocomposite, consisting of a polymer medium and pseudoparticles, is predicted by Takayanagi equation. The impacts of various factors on the modulus of the products are analyzed, and the results from the two-step method are compared with experimental data from different samples. It has been observed that the modulus of samples progressively increases with an increase in interphase depth. Also, a higher interphase modulus contributes to an enhanced modulus of samples. Nevertheless, excessively high interphase moduli (Ei > 60 GPa) result in only a marginal improvement in the modulus of nanocomposites. Additionally, narrower HNTs are advantageous for producing stronger samples, though the modulus of the nanocomposites slightly diminishes at very high HNT radii (R > 55 nm). The outputs of two-step method agree with the experimental moduli of various HNT-filled systems.

Enhanced enzymatic electrochemical detection of an organophosphate Pesticide: Achieving Wide linearity and femtomolar detection via gold nanoparticles growth within polypyrrole films.

The indiscriminate use of pesticides in agriculture demands the development of devices capable of monitoring contaminations in food supplies, in the environment and biological fluids. Simplicity, easy handling, high sensitivities, and low limits-of-detection (LOD) and quantification are some of the required properties for these devices. In this work, we evaluated the effect of incorporating gold nanoparticles into indigo carmine-doped polypyrrole during the electropolymerization of films for use as an acetylcholinesterase (AChE) enzyme-based biosensor. As proof of concept, the pesticide methyl parathion was tested towards the inhibition of AChE. The enzyme was immobilized simply by drop-casting a solution, eliminating the need for any prior surface modification. The biosensors were characterized with cyclic voltammetry, scanning electron microscopy, transmission electron microscopy, and Raman spectroscopy. The assays for the detection of methyl parathion with films containing polypyrrole, indigo carmine and AChE (PPy-IC-AChE) presented a sensitivity of 5.7 µA cm-2 g-1 mL and a LOD of 12 nmol L-1 (3.0 ng L-1) with a linear range from 1.3 x 10-7 mol L-1 to 1.0 x 10-5 mol L-1. The introduction of gold nanoparticles (AuNP) into the film (PPy-IC-AuNP-AChE) led to remarkable improvements on the overall performance, such as a lower redox potential for the enzymatic reaction, a 145 % increase in sensitivity (14 µA cm-2 g-1 mL), a wider detection dynamic range (from 1.3x10-7 to 1.0x10-3 mol L-1), and a very low LOD of 24 fmol L-1 (64 ag mL-1). These findings underscore the potential of using AuNPs to improve the enzymatic performance of biosensor devices.

Synthesis of algal-bacterial sludge activated carbon/Fe3O4 nanocomposite and its potential in antibiotic ciprofloxacin removal by simultaneous adsorption and heterogeneous Fenton catalytic degradation.

The extensive use of pharmaceuticals has increased their presence in the environment, posing significant ecological and public health concerns. The current study reports the magnetic nanocomposite (M-ABAC) synthesis using the algal-bacterial sludge as the precursor for activated carbon and evaluates its potential in fluoroquinolone antibiotics removal. The activated carbon from algal-bacterial sludge was composited with Fe3O4 nanoparticles using the co-precipitation method. The M-ABAC was characterized using Fourier transform infrared spectroscopy (FTIR), X-ray diffraction (XRD), X-ray photoelectron spectroscopy (XPS), scanning electron microscopy with energy dispersive X-ray spectroscopy (SEM-EDX), Brunauer-Emmett-Teller (BET) analysis, and vibrating sample magnetometry (VSM). M-ABAC was employed for antibiotic ciprofloxacin (CIP) removal by combined adsorption and heterogenous Fenton degradation. The adsorption studies reveal that the Langmuir isotherm best fits the experimental data, with a maximum adsorption capacity of 81.6 mg/g. Pseudo-second-order kinetic model well describes adsorption kinetics. Fenton catalytic degradation was performed using H2O2 as the activating agent. The optimal H2O2 dosage was observed to be 10 mM. A CIP adsorptive removal efficiency of 75% was observed at 2 g/L dosage of M-ABAC in a 200 ppm CIP solution. Simultaneous adsorption and Fenton catalytic degradation further enhanced the removal efficiency to 92%. Radical scavengers experiment revealed that the hydroxyl radical (•OH) was the dominant reactive oxidation species. The degradation products of the CIP were identified using liquid chromatography quadrupole time-of-flight mass spectroscopy (LC-QTOF-MS). The possible CIP degradation mechanisms include decarboxylation, piperazine moiety degradation, defluorination, and hydroxylation.

Perovskite nanocomposites: synthesis, properties, and applications from renewable energy to optoelectronics.

The oxide and halide perovskite materials with a ABX3 structure exhibit a number of excellent properties, including a high dielectric constant, electrochemical properties, a wide band gap, and a large absorption coefficient. These properties have led to a range of applications, including renewable energy and optoelectronics, where high-performance catalysts are needed. However, it is difficult for a single structure of perovskite alone to simultaneously fulfill the diverse needs of multiple applications, such as high performance and good stability at the same time. Consequently, perovskite nanocomposites have been developed to address the current limitations and enhance their functionality by combining perovskite with two or more materials to create complementary materials. This review paper categorizes perovskite nanocomposites according to their structural composition and outlines their synthesis methodologies, as well as their applications in various fields. These include fuel cells, electrochemical water splitting, CO2 mitigation, supercapacitors, and optoelectronic devices. Additionally, the review presents a summary of their research status, practical challenges, and future prospects in the fields of renewable energy and electronics.

High N2-selectivity of nitrite reduction by palladium-laden nanocomposite with self-sufficient electron donators.

Selectively reducing nitrite to gaseous nitrogen (N2) with an effective and recyclable fashion stands as an attractive alternative for treating the relevant wastewater. Herein, a Pd-based nanocomposite (Pd@EDA-CMPS) was subtly assembled by encapsulating Pd(0) nanoparticles into a porous polystyrene carrier, which was aforehand functionalized with ethylenediamine (EDA) as the endogenous electron donator. Systematical macroscopic experiments confirm that the pre-grafted EDA groups can substantially stimulate the catalytic activity of the laden Pd(0) nanoparticles with high removal efficiency and N2 selectivity of Pd@EDA-CMPS toward nitrite; specifically, high N2 selectivity (86%) was achieved by Pd@EDA-CMPS with an excellent anti-interference ability against competing anion and a broad pH-range applicability (4-11), whereas no N2 production was detected for its counterparts (CMPS, EDA-CMPS, and Pd@CMPS). Spectroscopic analyses reveal that the grafted EDA groups played a decisive role in the formation of H-loaded Pd(0) nanoparticles inside the porous substrate, which joint with the unique pH-buffering ability of EDA drove the reaction to the production of nitrogen (N2) rather than ammonia (NH3). The exhausted Pd@EDA-CMPS can be promisingly regenerated by NaOH (eluting) and NaBH4 (restoring) solution without obvious loss in treatment capacity and N2 selectivity. This work provides a feasible strategy for catalytically reducing nitrite into N2 without the provision of exogenous reductor such as hydrogen.

Application Progress of Multi-Functional Polymer Composite Nanofibers Based on Electrospinning: A Brief Review.

Nanomaterials are known as the most promising materials of the 21st century, among which nanofibers have become a hot research and development topic in academia and industry due to their high aspect ratio, high specific surface area, high molecular orientation, high crystallinity, excellent mechanical properties, and many other advantages. Electrospinning is the most important preparation method for nanofibers and their thin membranes due to its controllability, versatility, low cost, and simplicity. Adding nanofillers such as ceramics, metals, and carbon materials to the electrospinning polymer solutions to prepare composites can further improve the mechanical strength and multi-functionality of nanofibers and their thin membranes and also provide possibilities for their widespread applications. Based on the rapid development in the field of polymer composite nanofibers, this review focuses on polyurethane (PU)-based composite nanofibers as the main representative and reviews their latest practical applications in many fields such as sound-absorbing materials, biomedical materials (including tissue engineering implants, drug delivery systems, wound dressings and other anti-bacterial materials, health materials, etc.), wearable sensing devices and energy harvesters, adsorbent materials, electromagnetic shielding materials, and reinforcement materials. Finally, a summary of their performance-application relationship and prospects for further development are given. This review is expected to provide some practical experience and theoretical guidance for further developments in related fields.

Green Preparation of S, N Co-Doped Low-Dimensional C Nanoribbon/C Dot Composites and Their Optoelectronic Response Properties in the Visible and NIR Regions.

The green production of nanocomposites holds great potential for the development of new materials. Graphene is an important class of carbon-based materials. Despite its high carrier mobility, it has low light absorption and is a zero-bandgap material. In order to tune the bandgap and improve the light absorption, S, N co-doped low-dimensional C/C nanocomposites with polymer and graphene oxide nanoribbons (the graphene oxide nanoribbons were prepared by open zipping of carbon nanotubes in a previous study) were synthesized by one-pot carbonization through dimensional-interface and phase-interface tailoring of nanocomposites in this paper. The resulting C/C nanocomposites were coated on untreated A4 printing paper and the optoelectronic properties were investigated. The results showed that the S, N co-doped C/C nanoribbon/carbon dot hybrid exhibited enhanced photocurrent signals of the typical 650, 808, 980, and 1064 nm light sources and rapid interfacial charge transfer compared to the N-doped counterpart. These results can be attributed to the introduction of lone electron pairs of S, N elements, resulting in more transition energy and the defect passivation of carbon materials. In addition, the nanocomposite also exhibited some electrical switching response to the applied strain. The photophysical and doping mechanisms are discussed. This study provides a facile and green chemical approach to prepare hybrid materials with external stimuli response and multifunctionality. It provides some valuable information for the design of C/C functional nanocomposites through dimensional-interface and phase-interface tailoring and the interdisciplinary applications.

Evaluating Optical Properties of Mixed-Phase 2D MoSe2/Poly(vinyl alcohol) Nanocomposite Film.

Highly solar light-absorbing poly(vinyl alcohol) (PVA) nanocomposite films have garnered wide attention in fields such as flexible optoelectronics, solar energy harvesting, and photothermal therapy. However, fabricating PVA nanocomposite films with a broad spectrum of solar absorption using cost-effective and non-toxic nanofillers remains challenging. Herein, nanocomposite films of PVA incorporating various concentrations of mixed-phase 2D MoSe2 nanosheets (i.e., a combination of the 2H and 1T phase) were prepared using a solution casting technique. Scanning electron microscopy (SEM) shows homogenous dispersion of MoSe2 nanosheets in the PVA matrix even at higher concentrations, while atomic force microscopy (AFM) reveals increasing surface roughness with increasing MoSe2 content, reaching a plateau after 20 wt%. With the increase in the concentration of MoSe2, the nanocomposite films exhibit interesting light absorption characteristics reaching their highest absorption (average 94.9%) at 40 wt% MoSe2. The incorporated mixed-phase MoSe2 nanosheets induce a significant change in the energy levels of the PVA matrix, which is reflected in the reduced optical band gap energy (2.63 eV) at 40 wt% MoSe2 against pure PVA (5.28 eV). The excellent light absorption of PVA nanocomposite films across the entire range from 250 nm to 2500 nm is attributed to the thin 2D structure of MoSe2 and the presence of its mixed phase.

Exploring the diverse applications of sol-gel synthesized CaO:MgAl2O4 nanocomposite: morphological, photocatalytic, and electrochemical perspectives.

A nanocomposite of CaO:MgAl2O4 was synthesized through a straightforward and cost-effective sol-gel method. The investigation of the novel CaO:MgAl2O4 nanocomposite encompassed an examination of its morphological and structural alterations, as well as an exploration of its photocatalytic activities and electrochemical characteristics. XRD analysis revealed a nanocomposite size of 24.15 nm. The band gap, determined through UV studies, was found to be 3.83 eV, and scanning electron microscopy (SEM) illustrated flake-like morphological changes in the CaO:MgAl2O4 samples. TEM, HRTEM, and SAED studies of a CaO:MgAl2O4 nanocomposite would reveal important details about its morphology, crystallography, and nanostructure. Photocatalytic activity was quantified by studying the degradation of Acid Red-88 (AR-88) dye in a deionized solution, achieving a 70% dye degradation under UV irradiation in 120 min. Plant growth examinations were carried out using dye degraded water to test its suitability for agriculture. The electrochemical energy storage and sensing applications of the prepared nanocomposite were examined using CaO:MgAl2O4 modified carbon paste electrode through cyclic voltammetry (CV) and electrochemical impedance spectroscopy (EIS). In conclusion, the synthesized CaO:MgAl2O4 nanocomposite demonstrated promising morphological and structural characteristics, efficient photocatalytic activity, and potential applications in electrochemical energy storage, highlighting its versatility for various technological and environmental applications.

Studies on cytocompatibility of human dermal fibroblasts on carbon nanofiber nanoparticle-containing bioprinted constructs.

Functional nanocomposite-based printable inks impart strength, mechanical stability, and bioactivity to the printed matrix due to the presence of nanomaterials or nanostructures. Carbonaceous nanomaterials are known to improve the electrical conductivity, osteoconductivity, mechanical, and thermal properties of printed materials. In the current work, we have incorporated carbon nanofiber nanoparticles (CNF NPs) into methacrylated gelatin (GelMA) to investigate whether the resulting nanocomposite printable ink constructs (GelMA-CNF NPs) promote cell proliferation. Two kinds of printable constructs, cell-laden bioink and biomaterial ink, were prepared by incorporating various concentrations of CNF NPs (50, 100, and 150 µg/mL). The CNF NPs improved the mechanical strength and dielectric properties of the printed constructs. The in vitro cell line studies using normal human dermal fibroblasts (nHDF) demonstrated that CNF NPs are involved in cell-material interaction without affecting cellular morphology. Though the presence of NPs did not affect cellular viability on the initial days of treatment, it caused cytotoxicity to the cells on days 4 and 7 of the treatment. A significant level of cytotoxicity was observed in the highly CNF-concentrated bioink scaffolds (100 and 150 µg/mL). The unfavorable outcomes of the current work necessitate further study of employing functionalized CNF NPs to achieve enhanced cell proliferation in GelMA-CNF NPs-based bioprinted constructs and advance the application of skin tissue regeneration.

Mechanical Properties of Clay-Reinforced Polyamide 6 Nanocomposite Liner Materials of Type IV Hydrogen Storage Vessels.

This study focuses on polyamide 6/organo-modified montmorillonite (PA6/OMMT) nanocomposites as potential liner materials, given the growing interest in enhancing the performance of type IV composite overwrapped hydrogen storage pressure vessels. The mechanical properties of PA6/OMMT composites with varying filler concentrations were investigated across a temperature range relevant to hydrogen storage conditions (-40 °C to +85 °C). Liner collapse, a critical issue caused by rapid gas discharge, was analyzed using an Ishikawa diagram to identify external and internal factors. Mechanical testing revealed that higher OMMT content generally increased stiffness, especially at elevated temperatures. The Young's modulus and first yield strength exhibited non-linear temperature dependencies, with 1 wt. per cent OMMT content enhancing yield strength at all tested temperatures. Dynamic mechanical analysis (DMA) indicated that OMMT improves the storage modulus, suggesting effective filler dispersion, but it also reduces the toughness and heat resistance, as evidenced by lower glass transition temperatures. This study underscores the importance of optimizing OMMT content to balance mechanical performance and thermal stability for the practical application of PA6/OMMT nanocomposites in hydrogen storage pressure vessels.

Prediction of Mechanical Properties of Nano-Clay-Based Biopolymeric Composites.

An understanding of the mechanical behavior of polymeric materials is crucial for making advancements in the applications and efficiency of nanocomposites, and encompasses their service life, load resistance, and overall reliability. The present study focused on the prediction of the mechanical behavior of biopolymeric nanocomposites with nano-clays as the nanoadditives, using a new modeling and simulation method based on Comsol Multiphysics software 6.1. This modeling considered the complex case of flake-shaped nano-clay additives that could form aggregates along the polymeric matrix, varying the nanoadditive thickness, and consequently affecting the resulting mechanical properties of the polymeric nanocomposite. The polymeric matrix investigated was biopolyamide 11 (BIOPA11). Several BIOPA11 samples reinforced with three different contents of nano-clays (0, 3, and 10 wt%), and with three different nano-clay dispersion grades (employing three different extrusion screw configurations) were obtained by the compounding extrusion process. The mechanical behavior of these samples was studied by the experimental tensile test. The experimental results indicate an enhancement of Young's modulus as the nano-clay content was increased from 0 to 10 wt% for the same dispersion grades. In addition, the Young's modulus value increased when the dispersion rate of the nano-clays was improved, showing the highest increase of around 93% for the nanocomposite with 10 wt% nano-clay. A comparison of the modeled mechanical properties and the experimental measurements values was performed to validate the modeling results. The simulated results fit well with the experimental values of Young's modulus.

Performance and reaction mechanism of montmorillonite/α-Fe2O3/starch bio-nanocomposite as high-efficiency photocatalytic degradation of acetaminophen: Characterization, feasibility, and pathway.

The worldwide challenge of eliminating pharmaceutical contaminants requires immediate attention. Developing bio-based catalysts that are eco-friendly, reusable, and high-performance, employing starch (ST) and montmorillonite (MMT) as support, holds tremendous promise as a novel biocatalyst for pharmaceutical waste removal. In this study, a montmorillonite/α-Fe2O3/starch (MMT/α-Fe2O3/ST) bio-nanocomposite photocatalyst was successfully synthesized and used for acetaminophen (ACT) degradation under UVA-LED irradiation. The influence of operational factors, such as catalyst, ACT concentrations, and solution pH, on photocatalytic activity was examined in detail; catalyst: 0.75 g/L, pH: 7.1, leading to total ACT (10 mg/L) removal in ∼80 min. MMT/α-Fe2O3/ST showed excellent durability due to negligible Fe leaching. After four successive degradation cycles, ACT and TOC elimination efficiencies remained over 91 and 42.7 %. Compared to other anions studied, carbonate ions suppressed the most ACT degradation. Based on the radical scavenger experiments, hydroxyl and superoxide radicals and holes were involved in the MMT/α-Fe2O3/ST system. LC-MS results were used to propose ACT degradation pathways. This work illuminated the significance of biocatalysts in removing emerging pollutants from wastewater.