Source Identification of Potentially Toxic Metals in Plants of Alpine Ecosystems of Mt. Madra by Positive Matrix Factorization.

In this study, the concentrations of cadmium (Cd), iron (Fe), manganese (Mn), nickel (Ni), lead (Pb) and zinc (Zn) in plants sampled from Mt. Madra were investigated. Furthermore, the distribution characteristics and source identification of potentially toxic metals were investigated with the application of Positive Matrix Factorization (PMF) modelling. Samples of 26 different plant species were taken from Mt. Madra at elevations ranging from 177 to 1347 m using the multi-point sampling approach. The metal quantities measured by ICP-OES are the following sequences (mean ± SD) (mg/kg): Fe (974.96 ± 29.6) > Mn (111.81 ± 2.6) > Zn (27.28 ± 0.2) > Ni (2.17 ± 0.03) > Pb (0.77 ± 0.01) > Cd (0.12 ± 0.01). According to the plant samples in which the highest values were determined, the metals are as follows: Cd (Lathyrus laxiflorus, 0.401 mg/kg), Fe (Ajuga orientalis, 7621.207 mg/kg), Mn (Castanea sativa, 724.927 mg/kg), Ni (Prunella laciniata, 6.947 mg/kg), Pb (Crataegus stevenii, 3.955 mg/kg) and Zn (Prunella laciniata, 50.802 mg/kg). The results of the PMF model showed that Cd had an atmospheric transport factor originated and transported from industrial activites, Ni had a substrate factor, Fe, Mn, Pb and Zn were influenced by different anthropogenic factors.

Investigation of Mercury Contamination in Lipstick Sold in the Saudi Market and the Potential Health Risk.

Environmental contamination is a significant global health issue, with cosmetics and pharmaceuticals being major polluters. High concentrations of heavy metals, such as Hg, have been found to have toxic effects and may pose a threat to human health. This study aimed to determine the concentration of mercury (Hg) in lipsticks available in the Saudi Arabia market. In this study, 12 lipstick samples from three colours were analysed using inductively coupled plasmaoptical emission spectrometry (ICP-OES) to measure the content of Hg. The concentration range of Hg was 0.004-0.296 ppm. Moreover, the systemic exposure dosage of mercury in the lipstick samples examined in this study ranged from 5.01x10-8 to 1.43x10-6 µg/kg bw/day, while the range of the margin of safety was from 7.3 x 109 to 2.2 x 108.The Hg concentration in all analysed samples was less than 0.50 and 1 ppm, which indicated that the Hg level was within acceptable limits according to Saudi Standards, Metrology and Quality Organization (SASO) and the United States Food and Drug Administration (US FDA), respectively.On the other hand, the calculated margin of safety values for mercury exceeded the safe standard established by the WHO. The results derived from using hazard quotient (HQ) indices depict the potential carcinogenic health risk posed to consumers who employ red-coloured lipsticks.

Determination of trace elements content of fruits from Tehran's market using ICP- OES method: a risk assessment study.

For the first time in Iran, in this study, the amount of 19 trace elements in some types of commonly consumed Iranian fruits (in their peel and pulp) was evaluated by ICP-OES (Inductively coupled plasma-optical emission spectrometry) method. Based on the outcomes, the highest and lowest average detected elements in all fruits samples were related to (Al) aluminum (1842.18) and (V) vanadium (0.28) ppm, respectively. Mercury (Hg) and antimony (Sb) were not detected (ND) in any samples. Also, the maximum mean of elements in quince, lemon, grapefruit, kiwi, orange south, orange north and tangerine samples was related to(Fe) iron (2048.32 ppm), (Zn)zinc(753.45 ppm), Fe (1056.33 ppm), Al (9794.41 ppm), Zn (717.78 ppm), Fe (1334.87 ppm) and Fe (974.93 ppm), respectively. Furthermore, our outcomes revealed, the highest mean of elements in kiwi peel, kiwi pulp, orange North peel, orange North pulp, orange South peel, orange South pulp, quince peel, quince pulp, grapefruit peel, grapefruit pulp, lemon peel, lemon pulp, tangerine peel and tangerine pulp was related to Al (17967.79 ppm), Al (1621.03 ppm), Fe (1350.01 ppm), Al (1457.66 ppm), Zn (934.71 ppm), Fe (728.06 ppm), Fe (2768.11 ppm), Fe (1328.54 ppm), Zn (1008.54 ppm), Fe (1198.00 ppm), Zn (683.35 ppm), Zn (823.55 ppm), Fe (1182.59 ppm), and Fe (767.27 ppm), respectively. Based on the Monte Carlo simulation results, the THQ (target hazard quotient) and ILCR (Incremental Lifetime Cancer Risk) related to exposure to heavy metals via fruits for adults and children showed that there is no significant non-carcinogenic risk (THQ < 1) and carcinogenic risk (ILCR < 1E-4) for adults and children.

Investigating Trace and Macro-element Composition of Herbal and Nutraceutical Dietary Supplements Marketed in Oman: Insights into Safety and Labeling.

With the global increase in the use of dietary supplements to provide nutrients in one's regular diet, these supplements' potential health risks and benefits have become a topic of significant interest. Interestingly, as dietary supplements, the Food and Drug Administration (FDA) in the United States (USA), Europe, and most countries do not require manufacturers and distributors to obtain approval or provide safety assessments before marketing those products. This research explores for the first time 16 heavy, trace and macro-elemental contents, namely, As, Ni, Cd, Pb, Cu, Co, Mn, Cr, Zn, V, Fe, Al, K, Na, Mg, and Ca, within 24 nutraceutical and herbal supplements marketed in Oman. The research is focusing on ensuring their compositions, concentrations, and freedom of toxic elements. ICP-OES was utilized, preceded by a microwave digestion technique to digest the samples in concentrated HNO3 and HCl (3:1, v/v). The method was validated within linear ranges of 0.03-5.00 ppm and 1.0-200.0 ppm for micro- and macro-elements, respectively, with %recoveries ranging from 90 to 104%. The limits of detection ranged from 0.01 to 0.09 and 0.14 to 0.30 ppm, while the limits of quantification ranged from 0.03 to 0.28 and 0.46 to 0.91 ppm for micro- and macro-elements, respectively. The detected levels were compared to online databases for risk assessment. Although As and Cd were not detected in all samples, Pb was found in nine samples, with some exceeding regulated limits of exposure. About 80% of the samples contained Al, of which two samples were susceptible to serious health risks of exceeding exposure limits in their compiled doses. The locally harvested Omani herbal supplements revealed significant amounts of Zn, Mg, Mn, and Cu. The results highlighted the potential risks associated with both dosage compliance and labeling discrepancies.

Quantitative analysis and health risk assessment of selected heavy metals in pet food samples using ultrasound assisted hydrogen peroxide extraction followed by ICP-OES analysis.

There is a lack of information regarding the presence of heavy metals in feed ingredients for animals. Therefore, this study examines 10 feed samples collected from commercial pet food in South African market. The optimal working parameters for ultrasound assisted hydrogen peroxide extraction (UA-HPE) confirmed by multivariate optimization were sonication temperature at 80 °C for 60 min, sample mass of 0.1 g, and H2O2 concentration of 5 mol/L. The UA-HPE results demonstrated high accuracy of (>95%), reproducibility (≤1.9%), low method of detection limits (0.3498 and 0.49 µg/g), and strong linearity as confirmed by regression analysis. The environmental friendliness of the UA-HPE method was assessed using AGREEPrep metric tool that resulted with a score of 0.74. The concentration levels of Cd, Pb and As, ranged between 0.86 and 11.34, 4.50-11.45, and 2.61-12.5 µg/g, respectively greater than the standardized limits, whilst Cr, and Sn were below the limits of detection in all pet food. The health index calculations (HI > 1) revealed that the cat, dog, and horse feed pose health risk for animal consumption. Consequently, this study demonstrated a green, efficient, and cost-effective method for the analysis of animal feed with high accuracy.

Infrared spectroscopy coupled with machine learning algorithms for predicting the detailed milk mineral profile in dairy cattle.

Milk minerals are not only essential components for human health, but they can be informative for milk quality and cow's health. Herein, we investigated the feasibility of Fourier Transformed mid Infrared (FTIR) spectroscopy for the prediction of a detailed panel of 17 macro, trace, and environmental elements in bovine milk, using partial least squares regression (PLS) and machine learning approaches. The automatic machine learning significantly outperformed the PLS regression in terms of prediction performances of the mineral elements. For macrominerals, the R2 ranged from 0.59 to 0.78. Promising predictability was achieved for Cu and B (R2 = 0.66 and 0.74, respectively) and more moderate ones for Fe, Mn, Zn, and Al (R2 from 0.48 to 0.58). These results provide a reliable basis for a rapid and cost-effective quantification of these traits, serving as a resource for dairy farmers seeking to enhance the quality of milk production and optimize cheese properties.

Adsorption Dynamics of Disodium Octaborate Tetrahydrate on Clay Minerals: Implications for Construction Wood Protection.

The wood preservative disodium octaborate tetrahydrate (DOT) migration is studied in clay. Using boron analysis by inductively coupled plasma optical emission spectroscopy (ICP-OES), DOT spatial and temporal dynamics are surveyed to show how DOT permeates into the wood and the clay using concentration profiles as a function of depth, initial wood moisture, and direction of filling. Atomic force microscopy and chemical imaging using photoinduced force microscopy are used to show the morphology of the wood samples and the distribution of DOT on their surface. ICP-OES results show that the average DOT concentration in the wood samples is originally 0.8 and 1.5 wt% in the bulk and at the surface, respectively. Conditioning of the wood to a moisture content of 19% in a climatic chamber reduces DOT concentration by 8% for the fir and 17% for the spruce. After one week of contact with the clays, the results showed a rapid decrease of 25-40% in DOT concentration in wood. On longer periods (5 months), the spruce shows a tendency to reabsorb the DOT from the clay and the DOT migration stabilizes at 20%. These results contribute to defining the dosage of DOT when the wood is exposed to clay.

Correlation Between Severity of Schizophrenia with Certain Trace Elements and TNF-α Gene Expression and Its Circulatory Level in the Population of Western India.

This cross-sectional study aimed to assess serum trace element (TE) concentrations, TNF-α gene expression, protein levels in schizophrenia (SZ) patients, and their correlation with disease severity measured by Positive and Negative Syndrome Scale (PANSS) scores. Forty SZ cases and 40 healthy controls aged 18-60 were recruited. Forty (n = 40) cases who meet ICD-10 criteria for SZ and 40 (n = 40) healthy individuals (controls) between 18 and 60 years of age were recruited in the study. Sandwich enzyme-linked immunosorbent assay (ELISA) and RT-qPCR (quantitative real-time PCR) were used to estimate pro-inflammatory cytokine TNF-α protein and gene expression. Inductively coupled plasma-optical emission spectroscopy (ICP-OES) and graphite furnace atomic absorption spectroscopy (GFAAS) were used to assess serum levels of trace elements (TEs): Fe, Zn, Cu, Mg, and Se. Compared to healthy controls, cases had significantly higher levels of TNF-α protein, as well as Fe, Cu, and Se (p < 0.05). Cu correlated positively with TNF-α protein level (rho = 0.234; p = 0.048) and gene expression (rho = 0.333; p = 0.041) and with PANSS negative (rho = 0.531), general (rho = 0.643), and total (rho = 0.541) scores. Additionally, Zn negatively correlated with serum Mg (rho = - 0.426, p < 0.01) and positively with serum Se (rho = 0.343, p < 0.05). In conclusion, elevated Cu levels could potentially contribute to the development of SZ. Elevated Cu levels in cases and their correlation with the TNF-α gene and protein and PANSS score indicate Cu's potential role in exacerbating SZ severity through inflammatory cytokines. This suggests the involvement of metals and cytokines in the pathophysiology of SZ.

Elemental Profiling of Common Anti-diabetic Medicinal Plants of Swat and Peshawar Districts of Khyber Pakhtunkhwa (KPK) Province of Pakistan: An Investigation Using PIXE and ICP-OES.

The use of medicinal plants is integral to addressing liver, heart, lung, and other metabolic issues. These plants are rich in vitamins, minerals, flavonoids, and alkaloids, which collectively help in lowering intestinal glucose absorption and increasing insulin secretion by pancreatic tissues. Elemental analysis, encompassing major, minor, and trace elements, was performed on various parts (leaves, roots, and seeds) of 16 anti-diabetic medicinal plants collected from different regions of Swat and Peshawar in Khyber Pakhtunkhwa (KPK), Pakistan. This analysis utilized proton-induced X-ray emission (PIXE) and inductively coupled plasma optical emission spectroscopy (ICP-OES) techniques. Our PIXE and ICP-OES analysis revealed the presence of major (Ca, K, S, P), minor (Si, Cl), and trace (Al, Mn, Fe, Ni, Cu, Zn, Se, Cr, and Sc) elements in various parts (leaves, roots, and seeds) of the 16 anti-diabetic medicinal plants studied. Specifically, elements such as Ca, K, Cr, Cu, Mn, Zn, and Se were detected, all of which are known to contribute in maintaining normal glucose metabolism. Notably, Zn and Se are crucial trace elements for the synthesis, secretion, and action of insulin. Significant Zn concentrations were observed in ten anti-diabetic medicinal plants: Albizia lebbeck (AL), Atropa acuminata (AA), Avena fatua (AF), Citrus medica (CM), Commiphora wightii (CW), Cymbopogon citratus (CC), Daucus carota (DC), Ziziphus mauritiana (FM), Hyoscyamus niger (HN), and Martynia annua (MA), and significant Se concentrations were observed in twelve medicinal plants, i.e., Albizia lebbeck (AL), Allium sativum (AS), Atropa acuminata (AA), Avena fatua (AF), Cannabis sativa (CS), Capparis spinosa (CaS), Commiphora wightii (CW), Cymbopogon citratus (CC), Datura alba (DA), Daucus carota (DC), Ziziphus mauritiana (FM), and Hyoscyamus niger (HN). Our study's elemental analysis using PIXE and ICP-OES on various parts of 16 medicinal plants identified a significant number of useful elements. Elements such as Ca, K, S, P, Al, Si, Cl, Mn, Fe, Ni, Cu, Zn, Se, and Cr were identified and quantified. These findings support the potential use of these plants in managing diabetes and highlight the importance of elemental profiling in understanding their therapeutic properties.

Advances in assessing Ca, K, and Mn translocation in oak tree stems (Quercus spp.).

As a part of the biogeochemical cycle, nutrient translocation plays an important role in enhancing the capacity of perennial plants to grow in nutrient-poor soils. Although leaf translocation has been extensively studied, nutrient translocation between wood rings has received considerably less attention, primarily because of methodological constraints. This study aimed to (i) evaluate the effects of different drying techniques on Ca, K, and Mn concentrations, (ii) calibrate a semi-quantitative method for obtaining ring-to-ring nutrient concentrations along wood cores, and (iii) develop a complete calculation chain for nutrient translocation. Three pairs of cores per tree were extracted from nine oaks, and three drying methods-103 °C, 65 °C, and freeze-drying-were applied to each core pair. For each core pair, the first core was analyzed using ITRAX. The second core was analyzed using ICP-OES following the mineralization of a 20 mg wood sample. Ca, K, and Mn concentrations and wood density were not affected by the drying methods (p > 0.05 for Ca, K, and Mn). After upscaling at the stand level, the total translocation was 10.8 ± 5.5 kg ha-1, 14.8 ± 11.4 kg ha-1, and 2.6 ± 0.9 kg ha-1 for Ca, K, and Mn, respectively, after 45 growing years. The total Ca, K, and Mn translocation showed a strong tree effect, partly explained by tree diameter. The study findings suggest that similar measurements can be performed on all wood cores sampled in previous studies and stored after air-drying. These results provide a reference for future analyses of Ca, K, and Mn translocations in different species from wide geographic areas.

Size-dependent renal filtration model explains human pharmacokinetics of a functional nanoparticle: The SPAGOPIX-01 clinical trial.

The pharmacokinetics in patients dosed with the nanoparticle-based MRI contrast agent SN132D is explained by a size dependent clearance mechanism and this behavior was modeled numerically. Blood samples from 14 patients were analyzed for silicon (a component of the nanoparticle) by ICP-OES. The pharmacokinetic model has only one free parameter and relies on a measured size distribution of the contrast agent and well-established properties of the renal and cardiovascular systems. The model fits well (R2 = 0.9910) with experimental data from samples taken from ten minutes to two weeks after start of infusion. These results support that the cut-off diameter for human renal filtration is 5.5 nm. The agreement between experiment and model implies that there is little or no plasma protein binding to the nanoparticles.

Recent Advances in the Determination of Major and Trace Elements in Plants Using Inductively Coupled Plasma Optical Emission Spectrometry.

Interest in measuring major and trace elements in plants has increased in recent years because of growing concerns about the elements' contribution to daily intakes or the health risks posed by ingesting vegetables contaminated by potentially toxic elements. The recent advances in using inductively coupled plasma atomic emission spectrometry (ICP-OES) to measure major and trace elements in plant samples are reviewed in the present work. The sample preparation before instrumental determination and the main advantages and limitations of ICP-OES are described. New trends in element extraction in liquid solutions using fewer toxic solvents and microextractions are observed in recently published literature. Even though ICP-OES is a well-established and routine technique, recent innovations to increase its performance have been found. Validated methods are needed to ensure the obtaining of reliable results. Much research has focused on assessing principal figures of merit, such as limits of detection, quantification, selectivity, working ranges, precision in terms of repeatability and reproducibility, and accuracy through spiked samples or certified reference materials analysis. According to the published literature, the ICP-OES technique, 50 years after the release of the first commercially available equipment, remains a powerful and highly recommended tool for element determination on a wide range of concentrations.

The levels of essential nutrients and nonessential metals in different varieties of teff produced in Hidabu Abote Woreda, Oromia, Ethiopia.

Ethiopia is the world's largest producer of teff (Eragrostis tef Zucc). This research was intended to determine the levels of mineral nutrients (metals and nonmetals) and nonessential metals in the grains of teff. Following the optimization of the method, the samples were wet-digested using reagents (5-mL HNO3 and 1-mL HClO4) at a temperature of 230°C for two and a half hours and analyzed using inductively coupled plasma-optical emission spectrometry. Under the optimum procedure, the coefficients of determination (R 2) ranged between .9980 and .9999. The limits of detection and limits of quantification were in the range of 0.036-14.49 and 0.111-43.93 mg/kg, respectively. The recovery ranged from 80.72% to 107.79%, indicating that the method was accurate. The optimized and validated method was applied to quantify the levels of analytes in the teff samples. The overall mean concentrations of the analytes in the three varieties of teff samples were determined (mg/kg) to be in the order P (3890-4853) > K (3040-3784) > Ca (1906-1959) > Mg (1402-1698) > Fe (128-305) > Mn (64-127.8) > Na (50-136.5) > Zn (19.8-27.3) > B (1.8-21.9) > Cu (4.17-6.9) > Ni (2.6-4.05) > Hg (1.8-4.0) > Pb (0.048-3.7) > Cd (0.012-2.09) > As (0.02-0.24), with a % RSD ranging between 0.017 and 11.1. The results revealed that teff grains are a good source of minerals and contain a significant amount of toxic elements, such as Cd, Hg, Pb, and As.

Quantitative Determination of Minerals and Toxic Elements Content in Tropical and Subtropical Fruits by Microwave-Assisted Digestion and ICP-OES.

In the presented study, 15 tropical and subtropical fruits were studied for their mineral composition ranging from trace to major elements by ICP-OES after microwave digestion. The moisture amounts were assigned to be between 21.90 (tamarind) and 95.66% (pepino). The differences between the macroelement quantities of the fruits were established to be statistically significant (p<0.01). P and K quantities of fruits were displayed to be between 53.40 (pepino) and 927.74 mg/kg (tamarind) to 720.27 (pepino) and 13441.12 mg/kg (tamarind), respectively. While Ca quantities of fruits vary between 123.71 (pineapple) and 1519.76 mg/kg (blood orange), Mg quantities of fruits were established to be between 78.66 (pepino) and 875.02 mg/kg (tamarind). In general, the lowest macroelement quantities were determined in pepino fruit, but the highest P and K contents were determined in Gooseberry and Tamarind fruits, respectively. The microelement amounts of the fruits were established to be at very low levels compared to the macroelement contents. In general, the most abundant element in fruits was Fe, followed by Zn, Cu, Mn and B in decreasing order. In general, heavy metal quantities of fruits were detected at very low levels (except As and Ba). As and Ba quantities of fruits were assigned to be between 0.972 µg/g (mandarin) and 5.86 (kiwi) to 0.103 (pineapple) and 4.08 (avocado), respectively. As with macro and microelements, results regarding heavy metal concentrations varied depending on fruit types.

Environmental Factors Influencing Metal Concentrations in Scomber colias Along the Canary Islands.

A total of 140 specimens of Scomber colias were collected from the Canary archipelago waters during the first semester of 2021, with 20 samples from each of the seven main islands. After analyzing the concentrations of metals (Al, Zn, Cd, Pb, Fe, and Cu) with ICP-OES, significant variations were observed among islands, with specimens from Tenerife and Gran Canaria containing higher levels of Al, Cd, and Pb, while those from Lanzarote and Fuerteventura had elevated levels of Zn, Fe, and Cu. These differences are probably related to greater anthropogenic activity around Tenerife and Gran Canaria coasts, leading to higher pollution levels, and the influence of Saharan dust and African upwelling on Lanzarote and Fuerteventura, enriching the waters with nutrients. Specific management strategies to mitigate marine pollution and continuous monitoring are crucial to safeguard marine ecosystems and to ensure food security.

Improvement of Alginate Extraction from Brown Seaweed (Laminaria digitata L.) and Valorization of Its Remaining Ethanolic Fraction.

This study aimed to improve the conventional procedure of alginate isolation from the brown seaweed (Laminaria digitata L.) biomass and investigate the possibility of further valorization of the ethanolic fraction representing the byproduct after the degreasing and depigmentation of biomass. The acid treatment of biomass supported by ultrasound was modeled and optimized regarding the alginate yield using a response surface methodology based on the Box-Behnken design. A treatment time of 30 min, a liquid-to-solid ratio of 30 mL/g, and a treatment temperature of 47 °C were proposed as optimal conditions under which the alginate yield related to the mass of dry biomass was 30.9%. The use of ultrasonic radiation significantly reduced the time required for the acid treatment of biomass by about 4 to 24 times compared to other available conventional procedures. The isolated alginate had an M/G ratio of 1.08, which indicates a greater presence of M-blocks in its structure and the possibility of forming a soft and elastic hydrogel with its use. The chemical composition of the ethanolic fraction including total antioxidant content (293 mg gallic acid equivalent/g dry weight), total flavonoid content (14.9 mg rutin equivalent/g dry weight), contents of macroelements (the highest content of sodium, 106.59 mg/g dry weight), and microelement content (the highest content of boron, 198.84 mg/g dry weight) was determined, and the identification of bioactive compounds was carried out. The results of ultra high-performance liquid chromatography-electrospray ionization-tandem mass spectrometry analysis confirmed the presence of 48 compounds, of which 41 compounds were identified as sugar alcohol, phenolic compounds, and lipids. According to the 2,2-diphenyl-1-picrylhydrazyl assay, the radical scavenging activity of the ethanolic fraction (the half-maximal inhibitory concentration of 42.84 ± 0.81 µg/mL) indicated its strong activity, which was almost the same as in the case of the positive control, synthetic antioxidant butylhydroxytoluene (the half-maximal inhibitory concentration of 36.61 ± 0.79 µg/mL). Gram-positive bacteria (Staphylococcus aureus, Enterococcus faecalis, and Bacillus cereus) were more sensitive to the ethanolic fraction compared to Gram-negative bacteria (Escherichia coli, Pseudomonas aeruginosa, and Shigella sonnei). The obtained results indicated the possibility of the further use of the ethanolic fraction as a fertilizer for plant growth in different species and antifouling agents, applicable in aquaculture.

Distribution of Elements in Durum Wheat Seed and Milling Products: Discrimination between Cultivation Methods through Multivariate Data Analysis.

Many staple foods originate from durum wheat and its milling products; because of this, it is very important to know their characteristics. This study investigates elemental contents in these products and if differences exist because of organic farming. The concentrations of 28 elements in the whole seed and in milling products, that is, bran, semolina and flour, of durum wheat, were determined through ICP-OES. The wheats were grown under conventional or organic agronomic practices to verify the possibility of discriminating, using the elemental content, between products coming from one or the other practice. The elements were more abundant in the outer layer of the seed, the bran, but most of them were also present in the others. Traces of Sb were present only in 3% of the samples, while traces of Tl were detected in approximately half of the seed and bran samples but not in other samples. The absence of an element was more characteristic of specific products, e.g., most semolina and flour lacked Co, while other elements showed small differences between products from organic and conventional cultivation or between different milling products, which was the case, for example, for traces of Ag, B, and V. The concentrations of these elements were coupled with multivariate discriminant analysis, specifically PLS-DA, to identify the cultivation provenance of the milled products. A few elements, although different for each product, are sufficient to attain precision and accuracy of classification close to 1; small differences exist for different products. The worst is flour, where the predicted precision and accuracy are 0.92, although using only three elements: B, K, and Se. Semolina attains perfect prediction when also adding to the three previous elements, Ag, Cd, and Cu. Further elements are necessary for bran, while Fe and Mg replace K and Ag to classify seeds. In conclusion, five elements, B, Cd, Cu, K, and Se, are the most important in distinguishing between organic and conventional agriculture; these elements also permit some differentiation among products. The method could help in fraud prevention.

Analyzing heavy metal contamination for one of the high-rate consumption fruits in Iran: A probabilistic health risk assessment.

Good health and well-being is one of the sustainable development goals (SDGs) that can be achieved through fruit consumption. This study measured cucumber (Cucumis sativus L.) heavy metal concentrations. Inductively coupled plasma-mass spectrometry (ICP-OES) was used to analyze the samples for heavy metal content. The uncertainty and sensitivity analyses of carcinogenic and non-carcinogenic heavy metal intake via cucumber (Cucumis sativus L.) consumption were assessed by Monte Carlo simulation. The mean ± SD levels of Cu, Pb, Zn, Cd, and As were determined to be 157.87 ± 128.54, 33.81 ± 6.27, 288.46 ± 114.59, 35.22 ± 18.67, and 33.6 ± 18.1 µg/kg, respectively. The 95th percentile of HI related to heavy metal intake via cucumber (Cucumis sativus L.) among children and adults were 2.64 and 1.75, respectively. Also, the 95th percentile of ELCR related to heavy metal were 8.26E-4 and 4.14E-3 among children and adults, respectively. The 95th percentile of LTCR of As among adults and As, Cd, and Pb among children were in the WHO target range (1E-04 to 1E-06) so reducing the concentration of them can help to reduce overall LTCR. When HQ and LTCR are below the cut limits, reducing heavy metals in high-consumption meals is a good way to lower them. In general, due to the wide consumption of various fruits, such as cucumber (Cucumis sativus L.), the concentration of environmental pollutants in their edible tissues should be monitored regularly, and the concentration of pollutants in these tissues should be minimized by proper planning.

The Influence of the Soil Profile on the Formation of the Elemental Image of Grapes and Wine of the Cabernet Sauvignon Variety.

The features for assessing the authenticity of wines by region of origin are studied, based on the relationship between the mineral composition of the wine, the grapes, and the soil profile (0 to 160 cm) from the place of growth of Cabernet Sauvignon grapes. Soil, grape, and wine samples were taken from the territories of six vineyards in the Anapa district of Krasnodar Territory, Russia. Using the methods of ICP-OES, thermal, and X-ray phase analysis, the soils were differentiated into three groups, differing in mineralogical and mineral compositions. The soil samples of the first group contained up to 31% quartz, the second group up to 25% quartz and 19% mixed calcite, and the third group up to 32% calcite and 15% quartz. The formation of the elemental image of the grapes was studied, taking into account the total content and mobile forms of metals in the soil. The territorial proximity of the vineyards did not affect the extraction of elements from the soil into the grape berry, and the migration of metals for each territory was selective. According to the values of the biological absorption coefficient, the degree of transition of metals from the soil to a berry was estimated. For K, Ti, Zn, Rb, Cu, and Fe in all berries, the coefficient was higher than 1.00, which means that the berry extracts contained not only mobile-form, but also difficult-to-dissolve metal compounds. The migration of macro-components from the soil to the berry was low, and amounted to 6-7% for Ca, 0.8-3.0% for Na, and 25-70% for Mg of the concentration of their mobile forms. For all territories, the maximum correlation between metal concentrations in grapes and soil was observed for samples from a depth of 0-40 cm. The discriminant model based on concentrations of Rb, Al, K, Sr, Co, Na, Pb, Ca, and Ni showed the formation of clusters in the territories of vineyard cultivation. The developed model allow the problems of identifying wines by region to be solved with high accuracy, using their elemental image.

Quantitative determination of selected elements in infant baby formulae and baby food cereals commercially available in Serbia using the ICP OES method.

The aim of this paper was the quantitative determination of some macro and trace elements, especially potentially toxic elements in the samples of infant baby formulae and baby food cereals commercially available in Serbia using the inductively coupled plasma optical emission spectrometry (ICP OES) method. Among the macro elements, K is the most abundant in all infant formulae samples, followed by Ca, P, Na and Mg. On the other hand, the analysis of food cereals showed that P is presents in the highest contents, followed by K, Ca, Na, and Mg. Potentially toxic elements As, Pb, Hg, and Cd were not detected in any sample of infant formulae, while Cd was detected and quantified in cereal foods. Also, the calculated values of Estimated Tolerable Weekly Intake (ETWI) as well as the Estimated Tolerable Monthly Intake (ETMI) were lower than recommended values for a tolerable weekly intake (TWI) and provisional tolerable monthly intake (PTMI).