Effect of degree of substitution of octenyl succinate on starch micelles for synthesis and stability of selenium nanoparticles: Towards selenium supplements.

To develop a promising selenium supplement that overcomes the instability and poor water dispersibility of selenium nanoparticles (SeNPs), we synthesized a series of amphiphilic octenyl succinic anhydride starch (OSAS) through esterification. As the degree of substitution (DS) increased, the particle size of OSAS micelles and the critical micelle concentration (CMC) decreased. FTIR and XRD analysis confirmed the successful introduction of octenyl succinic anhydride groups onto starch. Subsequently, OSAS micelles were used as carriers to synthesize SeNPs via in situ chemical reduction, forming SeNPs-loaded self-assembled starch nano-micelles (OSAS-SeNPs). The OSAS-SeNPs exhibited spherical dispersion in water with an average diameter of 116.1 ± 2.3 nm, contributed to enhanced hydrophobic interactions. TEM images showed a core-shell structure with SeNPs as the core and OSAS as the shell. FTIR results indicated hydrogen bonding interactions between OSAS and SeNPs. Due to the negatively charged OSAS shell and hydrogen bonding (OH⋯Se), OSAS-SeNPs remained non-aggregated for one month at room temperature, demonstrating remarkable stability. This study suggests that using OSAS can address the synthesis and stability issues of SeNPs, making it a potential selenium supplement candidate for further evaluation as an anticancer agent.

Pickering emulsion of pepper essential oil stabilized by Octenyl succinic acid starch: Characterization, in vitro release and anticancer activity.

Under high humidity and high temperature conditions, the quality of pepper essential oil easily deteriorates, and the oxidation of oil restricts its application, especially for the insolubility in water. This study investigated pepper essential oil encapsulated in Pickering emulsion with octenyl succinic acid starch, which was effectively able to reduce 100 times of the release rate. The smooth surface and complete particles of the emulsion were observed and no new chemical bonds were formed. The minimum particle sizes were 2.05 µm and 1.89 µm, when the Pickering emulsion was set to different storage conditions at pH 5 and 0.1 M NaCl, respectively. During gastrointestinal digestion, the release of essential oils was effectively delayed in the Pickering emulsion and the digestibility of the emulsion was 16.93% in 120 min. Compared with untreated cells, Pickering emulsion can effectively inhibit the proliferation of MCF-7 (52.71%). All these results indicate that OSA starch stabilized pepper essential oil can effectively increase solubility, improve stability, and expand the application range. Therefore, it can provide a theoretical basis for applications of pepper essential oil, especially for the functional drug application.

Ozone induced structural variation in OSA waxy rice starch: Effects on the thermal behavior of starch and its stabilized pickering emulsion.

Waxy rice starch (St) was modified by pre-OSA esterification reaction followed by ozone treatment. The molecular structure of this modified product (OSA-OSt) was characterized, and the thermal behaviors and its stabilized Pickering emulsion were evaluated. 1HNMR and XPS results discovered that ozone initially oxidized the hydroxyl groups in the amorphous region of starch (preferentially C2/C3) along with a degree of crosslinking, enhancing the molecular orderliness. This led to an increase in water-holding capability (29.15%) and swelling power (52.8 g/g), and a decrease in solubility (0.35%). TGA, RVA, and DSC indicated that oxidation-induced crosslinking within a brief treatment period enhanced the starch's thermal stability. The structural change enabled the formation of a weak gel structure during the heating process, which displayed high thermal and freeze-thaw stability. The work proves ozone is an effective way of improving the thermal behavior of OSA-starch and its emulsion for subsequent applications in numerous food products.

Citrus oil gland and cuticular wax inspired multifunctional gelatin film of OSA-starch nanoparticles-based nanoemulsions for preserving perishable fruit.

Inspired by the citrus oil gland and cuticular wax, a multifunctional material that stably and continuously released the carvacrol and provided physical defenses was developed to address issues of fresh-cut fruits to microbial infestation and moisture loss. The results confirmed that low molecular weight and loose structure of starch nanoparticles prepared by the ultrasound-assisted Fenton system were preferable for octenyl succinic anhydride modification compared to native starch, achieving a higher degree of substitution (increased by 18.59 %), utilizing in preparing nanoemulsions (NEs) for encapsulating carvacrol (at 5 % level: 81.58 %). Furthermore, the NEs-based gelatin (G) film improved with surface hydrophobic modification by myristic acid (MA) successfully replicated the citrus oil gland and cuticular wax, providing superior antioxidant (enhanced by 3-4 times) and antimicrobial properties (95.99 % and 84.97 % against Staphylococcus aureus and Escherichia coli respectively), as well as the exceptional UV shielding (nearly 0 transmittance in the UV region), mechanical (72 % increase in tensile strength), and hydrophobic (WCA 133.63°). Moreover, the 5%NE-G@MA film inhibited foodborne microbial growth (reduced by 50 %) and water loss (controlled below 15 %), extending the shelf life of fresh-cut navel orange and kiwi. Thus, the multifunctional film was a potential shield for preserving perishable fresh-cut products.

Influence of gelatinized octenyl succinic anhydride-modified waxy adlay seed starch on the properties of astaxanthin-loaded emulsions: Emulsion properties, stability and in vitro digestion properties.

Octenyl succinic anhydride (OSA)-modified starch is a commonly used food emulsifier and its emulsifying properties are positively correlated with the degree of substitution (DS). However, the maximum concentration of OSA in starch approved by the FDA and the China National Food Safety Standards is 3%. This study aims to enhance the emulsifying properties of OSA-modified waxy adlay seed starch by gelatinization under a limited DS and investigate its use in preparing delivery systems. The gelatinized OSA starch exhibited a more flexible macromolecular structure and better emulsifying activity (20.19 m2/g). The gelatinized OSA starch-stabilized astaxanthin-loaded emulsions showed high retention of astaxanthin (>50%) and long-term stability (56 days). In vitro digestion, the emulsion system showed a protective effect on astaxanthin, and the bioaccessibility of astaxanthin was increased to 16.32%. This study indicated that gelatinization could enhance the emulsifying properties of OSA starch, and this starch-stabilized emulsion was an effective system for astaxanthin.

Effects of OSA-starch-fatty acid interactions on the structural, digestibility and release characteristics of high amylose corn starch.

This study investigated the effects of octenyl succinic anhydride (OSA)-starch-fatty acid (FA) interactions on the structural, digestibility and release characteristics of high amylose corn starch (HAS). FTIR and XRD analysis showed that the hydrophobic interaction between HAS and FA promoted the covalent binding between OSA and HAS. With the increasing of the FA chain length, the complex index, degree of substitution, R1047/1022 and relative crystallinity of OSA-HAS-FA increased first and then decreased, whereas the first-order rate coefficient and percentage of digested in infinite time showed an opposite trend. Structural changes and the molecular interactions of OSA-HAS-FA with 12­carbon FA resulted in highest resistant starch content (45.43%) and encapsulation efficiency of curcumin (Cur) (47.98%). In vitro release test revealed that Cur could be gradually released from OSA-HAS-FA in simulated gastric, intestinal and colonic fluids. Results provided novel insights into HAS-FA complex grafted with OSA as carrier for colon-specific of functional materials.

Improved light and ultraviolet stability of curcumin encapsulated in emulsion gels prepared with corn starch, OSA-starch and whey protein isolate.

The objective of this study was to enhance the bioavailability and stability of curcumin (Cur) by encapsulating it in corn starch (CS)/octenylsuccinic acid modified (OSA)-starch-whey protein isolate (WPI) emulsion gels (EGs). As the volume fraction of the oil phase increased, the droplet size and ζ- potential of the EGs decreased. The encapsulation efficiency and bioavailability of Cur in CS/OSA-starch-WPI EGs with a 60% oil ratio were 96.0% and 67.3%, respectively. The release rate of free fatty acid and the bioavailability of Cur from the EGs after digestion were significantly higher compared to Cur dissolved in oil. EGs with an oil phase volume fraction of 75% and 80% demonstrated greater protection against light irradiation but were less effective against UV irradiation compared to EGs with a 60% oil phase volume fraction. Encapsulation in EGs proved to be an effective method for enhancing the bioavailability and stability of Cur.

Differences in the structural properties of three OSA starches and their effects on the performance of high internal phase Pickering emulsions.

The emulsifying properties of emulsions are significantly influenced by the structural properties of octenyl succinic anhydride (OSA) starch. The purpose of this work was to elucidate the effect of the structure of OSA starch on its performance as an emulsifier to stabilize Pickering high-internal-phase emulsions (HIPEs). The degrees of substitution (DS) of the three OSA starches were 0.0137, 0.0177 and 0.0236, and their degrees of branching (DB) were 13.96 %, 14.20 % and 14.32 % measured by 1H NMR, which were sequentially labeled as OSA1, OSA2, and OSA3. The OSA3 starch with higher DS and DB had a lower critical micelle concentration (CMC) (0.11 mg/mL). Its emulsification activity (EAI) and emulsion stability (ES) were 61.8 m2/g and 72.5 min, respectively, which were higher than OSA1 and OSA2 starches. The contact angle of the three OSA starches increased from 45.35° to 80.03° with increasing DS and DB. Therefore, it is hypothesized that OSA3 starches have better emulsification properties. The results of physical stability of HIPEs confirmed the above results. These results indicated that DS and DB have a synergistic effect on emulsion properties, and OSA starch with higher DS and DB values were more conducive to the construction of stable HIPEs systems.

Composite formation of whey protein isolate and OSA starch for fabricating high internal phase emulsion: A comparative study at different pH and their application in biscuits.

The composites formed by whey protein isolate (WPI) and octenyl succinate anhydride (OSA)-modified starch were characterized with a focus on the effect of pH, and their potential in fabricating high internal phase emulsions (HIPEs) as fat substitutes was evaluated. The particles obtained at pH 3.0, 6.0, 7.0, and 8.0 presented a nanosized distribution (122.04 ± 0.84 nm-163.24 ± 4.12 nm) while those prepared at pH 4.0 and 5.0 were remarkably larger. Results from the shielding agent reaction and Fourier transform infrared spectroscopy (FT-IR) showed that the interaction between WPI and OSA starch was mainly hydrophobic at pH 3.0-5.0, while there was a strong electrostatic repulsion at pH 6.0-8.0. A quartz crystal microbalance with dissipation (QCM-D) study showed that remarkably higher ΔD and lower Δf/n were observed at pH 3.0-5.0 after successive deposition of WPI and OSA starch, whereas slight changes were noted for those made at higher pH values. The WPI-OSA starch (W-O) composite-based HIPEs made at pH 3.0 and 6.0-8.0 were physically stable after long-term storage, thermal treatment, or centrifugation. Incorporation of HIPE into the biscuit formula yielded products with a desirable sensory quality.

Mechanism underlying joint loading and controlled release of ß-carotene and curcumin by octenylsuccinated Gastrodia elata starch aggregates.

This study aimed to fabricate a novel codelivery system to simultaneously load ß-carotene and curcumin in a controlled and synergistic manner. We hypothesized that the aggregates of octenylsuccinated Gastrodia elata starch (OSGES) could efficiently load and control the release of ß-carotene and curcumin in combination. Mechanisms underlying the self-assembly of OSGES, coloading, and corelease of ß-carotene and curcumin by relevant aggregates were studied. The OSGES could form aggregates with a size of 120.2 nm containing hydrophobic domains surrounded by hydrophilic domains. For coloading, the increased solubilities were attributed to favorable interactions between ß-carotene and curcumin as well as interactions with octenyl and starch moieties via hydrophobic and hydrogen-bond interactions, respectively. The ß-carotene and curcumin molecules occupied the interior and periphery of hydrophobic domains of OSGES aggregates, respectively, and they did not exist in isolation but interacted with each other. The ß-carotene and curcumin combination-loaded OSGES aggregates with a size of 310.5 nm presented a more compact structure than ß-carotene-only and curcumin-only loaded OSGES aggregates with sizes of 463.5 and 202.9 nm respectively, suggesting that a transition from a loose cluster to a compact cluster was accompanied by coloading. During in vitro digestion, the joint effect of ß-carotene and curcumin prolonged their release and increased their bioaccessibility due to competition between favorable hydrophobic and hydrogen-bond interactions and the unfavorable structure erosion and relaxation of the loaded aggregates. Therefore, OSGES aggregates were designed for the codelivery of ß-carotene and curcumin, indicating their potential to be applied in functional foods and dietary supplements.

Structure and surface properties of ozone-conjugated octenyl succinic anhydride modified waxy rice starch: Towards high-stable Pickering emulsion.

In the present work, a dual-modified waxy rice starch (OOWRS) fabricated with OSA and ozone was successfully used to stabilize the O/W Pickering emulsion. The molecular structure, surface properties, and underlying stabilizing mechanism were systematically investigated. The results showed that oxidation occurring on the surface of OSA-modified waxy rice starch (OSAWRS) resulted in the presence of indentations and cracks. The relative crystallinity of starch was generally decreased with increasing degree of oxidation. Due to the introduction of carbonyl and the variation in surface structure, the hydrophobicity and acidity of OSAWRS were significantly enhanced after the ozone treatment. Remarkably, OOWRS stabilized Pickering emulsion exhibited a feature of typical O/W emulsion, and the 0.5 h and 1 h OOWRS emulsion exhibited a more uniform droplet size as well as a higher surface potential. We also noted that a weak-gel network was formed within the OOWRS emulsion system as the hydrophilic starch chains played a bridging role. Two reasons for the improved stability of the emulsion were the special gel structure and the enhanced electrical repulsion among the droplets. This research provides that ozone-conjugated OSA modification is a promising strategy for improving the emulsion ability of starch-based Pickering emulsions.

Effect of tannic acid-OSA starch complexation on the binding capacity and release of aldehydes off-flavor in aqueous matrix.

In order to further clarify the regulation of tannic acid on the off-flavor in starch-based algal oil emulsions, the effect of different starch matrix (OSA starch and OSA starch-tannic acid complex) on the release capacities of aldehydes (pentanal, hexanal, heptanal, nonanal) were investigated. The adsorption and retention ability, thermodynamic parameters, and hydrophobicity of aldehydes in the starch matrix were analyzed. Nonanal exhibited the strongest adsorption ability (65.01%-85.69%) with the starch matrix, followed by heptanal, hexanal, and pentanal, which accounted for the structures of aldehydes. Furthermore, aldehydes had a higher affinity with complex (16.33%-83.67%) than OSA starch (9.70%-66.71%) because the tannic acid altered the structure of OSA starch. Isothermal titration calorimetry suggested that the interaction between the starch matrix and aldehydes was an entropy-driven spontaneous endothermic reaction, and hydrophobic interactions were the predominant driving forces. Altogether, these results lay a theoretical foundation for facilitating the regulation of flavor in starch foods.

Novel self-assembly nano OSA starch micelles controlled by protonation in aqueous media.

A new micellization method was applied to produce the nano octenyl succinic anhydride (OSA) modified starch micelles with controllable size. The underlying mechanism was explored by using Fourier transform infrared spectroscopy (FT-IR), nuclear magnetic resonance (NMR), dynamic light scattering (DLS), zeta-potential, surface tension, fluorescence spectra and transmission electron microscope (TEM). Due to the new starch modification method, the electrostatic repulsion between the deprotonation carboxyl groups prevented the aggregation of starch chains. With the progress of protonation, the weaken electrostatic repulsion and enhanced hydrophobic interaction driven the self-assembly of micelles. The size of micelles increased gradually with the increase of the protonation degree (PD) and concentration of OSA starch. However, a V-shaped trends were observed in the size as the increase of substitution of degree (DS). Curcuma loading test indicated that micelles had good encapsulated capability and the maximum value was 52.2 µg/mg. The understanding of the self-assembly behavior of OSA starch micelles can facilitate and improve the starch-based carrier designs used to synthesis complex and smart micelle delivery system with good biocompatibility.

Fabrication of octenyl succinic anhydride starch grafted with folic acid and its loading potential for doxorubicin hydrochloride.

In this study, octenyl succinic anhydride (OSA) starch with different folic acid (FA) grafting time was prepared and the degree of FA substitution at different grafting time was determined. The results of XPS quantitatively reflected the surface elemental composition of OSA starch grafted with FA. FTIR spectra further confirmed the successful introduction of FA on OSA starch granules. SEM images showed that the surface roughness of OSA starch granules was more obvious with higher FA grafting time. The particle size, zeta potential, and swelling properties were determined to study the effect of FA on the structure of OSA starch. TGA indicated that FA effectively enhanced the thermal stability of OSA starch at high temperature. The crystalline form of the OSA starch gradually transformed from A type to a hybrid A and V-type with the progress of FA grafting reaction. In addition, the anti-digestive properties of OSA starch were enhanced after grafting FA. Using doxorubicin hydrochloride (DOX) as the model drug, the loading efficiency of OSA starch grafted with FA for DOX reached 87.71 %. These results provide novel insights into OSA starch grafted with FA as potential strategy for loading DOX.

Consolidating the gelling performance of myofibrillar protein using a novel OSA-modified-starch-stabilized Pickering emulsion filler: Effect of starches with distinct crystalline types.

Starch-stabilized Pickering emulsions were employed as a novel particulate filler in myofibrillar protein (MP)-based gels for improving the gelling characteristics. The role of emulsions prepared by native starches (NS) with distinctive crystalline types (i.e., A-type waxy corn starch, B-type potato starch, and C-type pea starch) and their OSA-modified counterparts (A-OS, B-OS, C-OS) in the gelling performance was evaluated and compared with MP-stabilized-emulsion. Compared with MP-emulsion, starch-emulsion caused substantial increases in the gelling properties, notably for OSA-starch emulsions. Herein, A-OS exhibited up to 1.26-, 5.3-, and 2.9-fold increments in storage modulus, gel strength, and water holding capacity relative to pure MP gel, respectively, higher than B-OS and C-OS. Moreover, light microscopy evinced a more compact gel network filled with smaller and uniform oil droplets when A-OS emulsions were incorporated into the gels. The addition of OSA-starch emulsions, especially A-OS emulsion, facilitated the protein conformational conversion from α-helix to ß-sheet and caused a marked reduction of free sulfhydryls in the gels; yet, the chemical forces that stabilized the gels altered, where remarkable reinforcements in hydrogen bond and hydrophobic interaction were detected, in support of the construction of splendid MP gels. Hence, OSA-starch emulsions show promise as functional components in meat products.

An "intelligent -responsive" bactericidal system based on OSA-starch Pickering emulsion.

Pickering emulsion based on OSA-starch was developed in this study as an intelligent delivery system for the application of thymol against foodborne pathogens. Morphology and microstructure characterization showed that the Pickering emulsion was an O/W type emulsion and stayed stable at starch concentration of 200 mg/mL and oil fraction at 30 % with particle size of 10 µm and absolute Zeta potential of -12.5 mV. Low field nuclear magnetic resonance and rheology experiments indicated that a denser network structure was formed in this stable Pickering emulsion. Besides, the Pickering emulsion could endure long-time storage, low pH (3,5) and additional NaCl (50, 100, 200, 400 mM) and it showed enhanced bactericidal effects against Escherichia coli, Staphylococcus aureus (thymol =1.48 µmol/L) and Aspergillus flavus (thymol = 0.624 µmol/L) by inducing ROS eruption, membrane lipid peroxidation and cell shrink. Moreover, the bactericidal assay demonstrated that thymol could be intelligently released and a considerable 75 % timely bactericidal effect was detected after 9 days' intermittently exposing to E. coli, S. aureus and A. flavus in vitro, by comparison thymol alone showed only 20 % bactericidal effect due to its volatility. The results are of great importance to offer an intelligent delivery system of bio-actives defending foodborne pathogens.

Effect of chitosan-protocatechuic acid conjugate on stability and encapsulation capacity of polysaccharide-based high internal phase emulsion.

The aim of this work was to fabricate chitosan-protocatechuic acid (CSPA) conjugates by free radical grafting method and use them as novel emulsifiers to inhibit lipid oxidation and delay the photodegradation rate of curcumin in polysaccharide-based high internal phase emulsions (HIPEs). Results of UV-vis, FT-IR and 1H NMR spectra demonstrated that PA had been successfully bonded to chitosan (CS) through ester and amino linkages. CSPA conjugates (especially those with the ratio of CS to PA of 1:0.75) showed significantly increased water solubility and antioxidant activity than CS monomer. Furthermore, compared with sole OSA starch (OSAS), the electrostatic combination of CS and CSPA conjugate with OSAS could further reduce the interfacial tension, which was conducive to their adsorption at the oil-water interface. The introduction of CS and CSPA conjugate also increased the viscosity of aqueous phase and promoted the formation of gel-like percolating network structure, thereby effectively preventing droplets coalescence and endowing HIPEs with ideal viscoelasticity. More importantly, the contents of lipid hydroperoxide (24.09 µmol/g oil) and malondialdehyde (166.71 nmol/g oil) in HIPEs prepared by OSAS-CS-CSPA complexes were lower than those stabilized by OSAS, OSAS-CS and OSAS-CSPA complexes during accelerated storage. In addition, HIPEs prepared by OSAS-CS-CSPA complexes showed stronger protection capacity on curcumin against ultraviolet irradiation and natural light degradation. This study will provide useful information and technical reference for the fabrication of antioxidant polysaccharide-based HIPEs delivery vehicles.

Effects of octenyl succinylation on the properties of starches with distinct crystalline types and their Pickering emulsions.

Effects of octenylsuccinic anhydride (OSA) esterification on the morphology, crystalline structure, and emulsifying properties of three representative starches with different crystalline types, namely waxy corn starch (A-type), potato starch (B-type), and pea starch (C-type) were investigated. XRD patterns testified OSA substitution occurred principally in the amorphous region without affecting the crystalline patterns, whereas SEM verified esterification was mainly a surface phenomenon. However, OSA esterification caused a decrease in the peak intensity and area of small-angle X-ray scattering profiles, indicating the semi-crystalline lamellae ordering was impeded to a certain extent. Compared with A- and C-type starches, B-type starch had a stronger affinity for OSA, as manifested by its higher degree of substitution (DS), graver surface detriment, and depressed order of semi-crystalline lamellae. The emulsifying properties of all starches were pronouncedly improved by OSA modification, especially for A-type starch even with comparatively lower DS. Pickering emulsion stabilized by OSA-modified A-type starch (A-OSAS) with smaller droplet size and more uniform droplet size distribution exhibited more splendiferous stability relative to the other two modified starches. Moreover, rheological tests revealed A-OSAS possessed the highest apparent viscosity and storage modulus (G'), insinuating strong intermolecular interactions between starch granules at the interface and/or in the continuous phase.

Effects of tannic acid interfacial absorption on the physicochemical stability of algal oil-loaded emulsions and inhibition of fishy off-flavor.

In the present study, the inhibition of fishy off-flavor and destabilization in algae oil-loaded emulsions by tannic acid (TA) adsorption on octenyl succinic anhydride (OSA) starch interfaces were investigated. The changes of typical fishy off-flavor components in the emulsion, physiochemical stability, and interaction between TA and OSA starch were analyzed. The TA fortification significantly prevented the production of fishy smell-related volatile components such as heptanal and (E, E)-3, 5-octadiene-2-one. The proportion of TA on the interface was more than 90 %, forming an interfacial film with the antioxidant function. The emulsions stabilized by OSA starch-TA complexes had better oxidative and physical stability. The isothermal titration calorimetry suggested that the interaction between OSA starch and TA included hydrogen bonding and van der Waals forces (ΔG = -13.272 kJ·mol-1·K-1, ΔH = -1.302 × 103 kJ·mol-1, ΔS = -4.326 kJ·mol-1·K-1). Altogether, these results provided application guidance for developing starch-based oil-in-water emulsion systems with antioxidant properties.

Lipase-polydopamine magnetic hydrogel microspheres for the synthesis of octenyl succinic anhydride starch.

Octenyl succinic anhydride (OSA) starch is an important edible additive in the food field, and its synthesis method has attracted much attention. Lipase as a biocatalyst can improve the synthesis efficiency of OSA starch, and significantly inhibit the occurrence of side reactions. However, free lipase has not been widely applied in the synthesis of OSA starch due to the difficulty of separation from starch and poor reusability. In this work, a promising strategy for the synthesis of OSA starch catalyzed by lipase immobilized on polydopamine magnetic hydrogel microspheres (PMHM) is reported. The prepared lipase-polydopamine magnetic hydrogel microspheres (L-PMHM) can be uniformly dispersed in starch slurry, which is conducive to the full contact between lipase and starch. L-PMHM (Km =2.6276 µmol/mL) exhibits better affinity to the substrate than free lipase (Km = 3.4301 µmol/mL). Compared with the OSA starch catalyzed by free lipase (DS = 0.0176), the degree of substitution of OSA starch catalyzed by L-PMHM is up to 0.0277 in a short reaction time. In cyclic catalysis, L-PHMM can remain about 48 % of their original activity after 20 reuses and can be quickly separated from the product. These results suggest that L-PMHM has great potential as a biocatalyst for the efficient synthesis of OSA starch.