On the Development of Polylactic Acid/Polycaprolactone Blended Films with High Retention Capacity.

The retention capacity of polymers is related to the development of systems that combine high surface-to-volume ratio with good handling and specific functionality. Biodegradability and biocompatibility are also key features for extending the field of applications to areas such as biomedicine. With this in mind, the aim of this work is to develop biodegradable, biocompatible, and highly functionalized porous films, that ensure suitable handling and a good surface-to-volume ratio. Polylactic acid (PLA) is applied as a polymer matrix to which a polycaprolactone with a star-shaped architecture (PCL-COOH) to ensure a high concentration of carboxylic end functionalities is added. The porous films are prepared using the phase inversion technique, which, as shown by Scanning Electron Microscopy (SEM) analysis, promotes good dispersion of the PCL-COOH domains. Absorption and release measurements performed with a positively charged model molecule show that the retention capacity and release rate can be tuned by changing the PCL-COOH concentration in the systems. Moreover, the adsorption properties for the formulation with the highest PCL-COOH content are also demonstrated with a real and widely used drug, namely doxorubicin. Finally, the bio- and hemocompatibility of the films, which are enzymatically degradable, are evaluated by using human keratinocytes and red blood cells, respectively.

Subjective sleep parameters: A marker to PTSD symptoms evolution? A 4-year longitudinal study.

Disturbed sleep is a common feature after exposure to a traumatic event, especially when PTSD develops. However, although there is evidence suggesting a potential role of sleep disturbance in the progression of PTSD symptoms, the interrelationship between sleep and PTSD symptoms has yet to be determined. In order to address this knowledge gap, we have investigated the influence of initial sleep characteristics on the evolution of post-traumatic stress disorder (PTSD) symptoms over 4 years of follow-up among individuals exposed to the Brazilian Kiss nightclub fire. Participants were individuals exposed to the 2013 Kiss nightclub fire in Brazil. Sleep characteristics and PTSD symptoms were measured within the 4 years following the fire by self-report questionnaires, such as The Pittsburgh Sleep Quality Index (PSQI), and PTSD Checklist - Civilian version (PCL-C). Generalized estimating equations (GEE) models were used to examine the longitudinal associations (by estimating the relative effects of initial sleep problems on PTSD symptoms after adjusting for covariates). Comprehensive information concerning socio-demographic factors, health status, and sleep complaints were obtained. A total of 232 individuals were included. In GEE models, no significant interactions were observed between sociodemographic variables and PTSD symptoms in the follow-up period, however, associations were found between PTSD at baseline and the following factors: the female gender, the victim individuals and the existence of prior psychiatric disease. Initial subjective sleep parameters were strongly associated with PTSD symptoms over 4 years, mainly the presence of disturbed dreams (p = 0.012), increased sleep latency (p = 0.029), and reduced sleep duration (p = 0.012). Sleep complaints and PTSD symptoms were common among individuals after the disaster. The current study has found that the presence of sleep complaints, especially increased sleep latency, presence of disturbed dreams and short sleep duration, in the initial presentation after the fire was consistently associated with the perpetration of PTSD symptoms in the next 4 years of follow-up. These findings suggest that interventions addressing these sleep complaints have the potential to reduce the persistence and/or severity of PTSD symptoms.

The Effects of Psychopathy Facets on Treatment Involvement.

The current study explored the relations between patient characteristics and psychopathic traits in predicting treatment involvement. We rated treatment involvement using detailed archival clinical files of 218 individuals committed to the Massachusetts Treatment Center (MTC). Psychopathy Checklist-Revised (PCL-R) scores had been rated from a previous study on the same sample. Overall, PCL-R Facets 2 and 4 significantly predicted decreases in treatment involvement, suggesting the characteristics associated with these facets have the most disruptive effects on treatment involvement. Exploratory analyses were also conducted assessing the relations between the PCL-R facets and the individual treatment involvement components. Whereas Facet 2 significantly predicted lower levels in all three individual treatment involvement components, Facet 4 only significantly predicted lower levels in two, highlighting the differentiating effects of these facets. Identifying the components that have either positive or negative effects on treatment involvement can allow clinicians to tailor treatments to optimize treatment involvement and outcome.

Comparative morphology of the cruciate ligaments: A radiological study.

Background: The anterior cruciate ligament (ACL) and posterior cruciate ligament (PCL) are important structures to maintain knee stability. The present study aimed to further enrich understandings of the morphology of the cruciate ligaments and explore the relationship between the diameter of ACL and PCL. Method: This study collected valid MRI samples of 50 male and 50 female normal right knee joints and measured the diameter of each point of the ACL and PCL through the 3D Slicer. Results: The diameter of the ACL in the sagittal MRI of the normal right knee joint was significantly different from the diameter of each point of the PCL. The average diameter of each point of the ACL was larger than the diameter of the corresponding point of the PCL. Males and females had statistical differences in their PCL origin point, PCL midpoint, ACL origin point, ACL midpoint, and ACL insertion point diameters under sagittal MRI examination. The average diameter of males was greater than the average diameter of females at the above corresponding sites. In sagittal MRI scans of the normal right knee joint, we observed that only the origin point of the PCL exhibited a moderate correlation with the midpoint and insertion point of the ACL in terms of their respective diameters. Conclusion: The correlation between diameters of normal ACL and PCL in knee joint MRI was moderate and may help clinicians determine appropriate graft for cruciate ligament reconstruction surgery quickly for severe cruciate ligament injuries.

Bioengineered 3D ovarian model for long-term multiple development of preantral follicle: bridging the gap for poly(ε-caprolactone) (PCL)-based scaffold reproductive applications.

BACKGROUND: Assisted Reproductive Technologies (ARTs) have been validated in human and animal to solve reproductive problems such as infertility, aging, genetic selection/amplification and diseases. The persistent gap in ART biomedical applications lies in recapitulating the early stage of ovarian folliculogenesis, thus providing protocols to drive the large reserve of immature follicles towards the gonadotropin-dependent phase. Tissue engineering is becoming a concrete solution to potentially recapitulate ovarian structure, mostly relying on the use of autologous early follicles on natural or synthetic scaffolds. Based on these premises, the present study has been designed to validate the use of the ovarian bioinspired patterned electrospun fibrous scaffolds fabricated with poly(ε-caprolactone) (PCL) for multiple preantral (PA) follicle development. METHODS: PA follicles isolated from lamb ovaries were cultured on PCL scaffold adopting a validated single-follicle protocol (Ctrl) or simulating a multiple-follicle condition by reproducing an artificial ovary engrafted with 5 or 10 PA (AO5PA and AO10PA). The incubations were protracted for 14 and 18 days before assessing scaffold-based microenvironment suitability to assist in vitro folliculogenesis (ivF) and oogenesis at morphological and functional level. RESULTS: The ivF outcomes demonstrated that PCL-scaffolds generate an appropriate biomimetic ovarian microenvironment supporting the transition of multiple PA follicles towards early antral (EA) stage by supporting follicle growth and steroidogenic activation. PCL-multiple bioengineering ivF (AO10PA) performed in long term generated, in addition, the greatest percentage of highly specialized gametes by enhancing meiotic competence, large chromatin remodeling and parthenogenetic developmental competence. CONCLUSIONS: The study showcased the proof of concept for a next-generation ART use of PCL-patterned scaffold aimed to generate transplantable artificial ovary engrafted with autologous early-stage follicles or to advance ivF technologies holding a 3D bioinspired matrix promoting a physiological long-term multiple PA follicle protocol.

Graphene-enhanced PCL electrospun nanofiber scaffolds for cardiac tissue engineering.

Cardiovascular diseases, particularly myocardial infarction, have significant healthcare challenges due to the limited regenerative capacity of injured heart tissue. Cardiac tissue engineering (CTE) offers a promising approach to repairing myocardial damage using biomaterials that mimic the heart's extracellular matrix. This study investigates the potential of graphene nanopowder (Gnp)-enhanced polycaprolactone (PCL) scaffolds fabricated via electrospinning to improve the properties necessary for effective cardiac repair. This work aimed to analyze scaffolds with varying graphene concentrations (0.5%, 1%, 1.5%, and 2% by weight) to determine their morphological, chemical, mechanical, and biocompatibility characteristics. The results presented that incorporating graphene improves PCL scaffolds' mechanical properties and cellular interactions. The optimal concentration of 1% graphene significantly enhanced mechanical properties and biocompatibility, promoting cell adhesion and proliferation. These findings suggest that Gnp-enhanced PCL scaffolds at this concentration can serve as a potent substrate for CTE providing insights into designing more effective biomaterials for myocardial restoration.

Can cereal-based oral contrast agents-assisted ultrasound become an alternative to non-contrast magnetic resonance imaging (MRI) in radiological follow-up for pancreatic cystic lesions?

Background: Pancreatic cystic lesions (PCLs) are recommended to be examined by magnetic resonance imaging (MRI), yet MRI still has limitations, such as high costs, the risk of triggering claustrophobia, and relatively low availability compared with ultrasound. Oral contrast agents-assisted ultrasound has been used to examine the gallbladder and stomach, but whether oral contrast agents could improve the accuracy of transabdominal ultrasound (TAUS) for PCLs and could be a potential alternative to non-contrast MRI for PCL follow-up has not been studied. This study aimed to explore the value of cereal-based oral contrast agents in improving the accuracy of PCLs during TAUS. Methods: This is a prospective cohort study. Patients with PCL who were admitted to our center between January 2023 and January 2024 were enrolled, and TAUS was performed before and after taking cereal-based oral contrast agents. The imaging quality of the PCL was measured by structural visualization scores. The structural visualization scores of oral contrast agent-assisted ultrasound and non-contrast MRI were also compared. Results: A total of 27 patients with PCLs were enrolled, and 30 PCLs were detected. The sonolucency of the PCL improved after oral contrast agent administration. Before taking the agent, only 30% of patients had satisfactory sonolucency; after taking the oral contrast agent, the corresponding proportion reached 80% (P=0.002). The structural visualization score of the PCL determined by oral contrast agent-assisted TAUS was higher than that determined without the aid of an agent [1 (0-6) vs. 1 (0-3), P=0.001], which was mainly reflected in the increase in the number of visible septa after taking the agent. No significant difference was detected between the structural visualization score of the PCL examined by oral contrast agent-assisted TAUS and that examined by non-contrast MRI and the correlation between the 2 types of scores were satisfactory [1 (0-6) vs. 2 (0-7), P=0.070, Spearman correlation factor r=0.880]. Conclusions: This study used a structured scoring system to confirm that cereal-based oral contrast agents could improve the ultrasound quality of PCLs, and the correlation between the quality of oral contrast agent-assisted ultrasound and non-contrast MRI findings on PCLs was satisfactory. Further research to improve visualization of PCLs on TAUS using oral contrast agents could result in TAUS being a potential alternative to MRI in the follow-up of PCLs in resource-limited situations.

PCL injury following high energy trauma: associated injuries and postoperative complications "insights from a national registry study".

PURPOSE: The posterior cruciate ligament (PCL) is a vital knee stabilizer. While PCL injuries are rare, high-energy traumas can lead to total ruptures, with accompanying injuries requiring surgery. This study aims to investigate the demographics, concomitant injuries, and postoperative complications of patients who underwent PCL reconstruction due to high-energy trauma in a large patient sample. METHODS: Patients who underwent PCL reconstruction from 2016 to 2022 were retrospectively evaluated using data from a nationwide personal health recording system. Patient demographics, injury mechanisms, associated fractures, soft tissue injuries, and postoperative complications were collected from patient notes, clinical visits, and surgical notes. Individuals with a PCL injury following high-energy trauma (car accident, falls from height, motorcycle accident) with a minimum follow-up of 1 year were included in the study. RESULTS: The study included 416 patients with a mean age of 32.4 years. Isolated PCL injuries (n = 97, 23.3%) were observed less frequently than multiple-ligament injuries (n = 319, 76.7%). Most cases were treated with single-stage surgery (86.8%), while staged surgeries were performed in a minority of cases (13.2%). There was no relationship between trauma mechanisms and multiple-ligament involvement, accompanying injuries, or postoperative complications. Surgeries following car accidents were more likely to occur as staged surgeries (p = 0.014). Additionally, the complication rates for staged surgeries and younger patients (≤ 18 years) were significantly higher (p = 0.009). CONCLUSION: High-energy trauma-induced PCL injuries are often associated with severe concurrent knee injuries with multiple ligament involvement. PCL reconstructions following car accidents are more likely to be staged. These findings highlight the importance of careful consideration in managing these cases to minimize complications, particularly in younger age groups. LEVEL OF EVIDENCE: Level III.

The proximal centriole-like structure maintains nucleus-centriole architecture in sperm.

Proper connection between the sperm head and tail is critical for sperm motility and fertilization. Head-tail linkage is mediated by the Head-Tail Coupling Apparatus (HTCA), which secures the axoneme (tail) to the nucleus (head). However, the molecular architecture of the HTCA is poorly understood. Here, we use Drosophila to investigate formation and remodeling of the HTCA throughout spermiogenesis by visualizing key components of this complex. Using structured illumination microscopy, we demonstrate that key HTCA proteins Spag4 and Yuri form a 'Centriole Cap' that surrounds the centriole (or Basal Body) as it invaginates into the surface of the nucleus. As development progresses, the centriole is laterally displaced to the side of the nucleus while the HTCA expands under the nucleus, forming what we term the 'Nuclear Shelf.' We next show that the proximal centriole-like (PCL) structure is positioned under the Nuclear Shelf, functioning as a critical stabilizer of centriole-nuclear attachment. Together, our data indicate that the HTCA is a complex, multi-point attachment site that simultaneously engages the PCL, the centriole, and the nucleus to ensure proper head-tail connection during late-stage spermiogenesis.

Engineering an Extracellular Matrix Mimic Using Hemoglobin Protein Nanofibrils.

Extracellular matrix (ECM) is essential for tissue development, providing structural support and a microenvironment that is necessary for cells. As tissue engineering advances, there is a growing demand for ECM mimics. Polycaprolactone (PCL) is a commonly used synthetic polymer for ECM mimic materials. However, its biologically inactive surface limits its direct application in tissue engineering. Our study aimed to improve the biocompatibility of PCL by incorporating hemoglobin nanofibrils (HbFs) into PCL using an electrospinning technique. HbFs were formed from bovine hemoglobin (Hb) extracted from industrial byproducts and designed to offer PCL an improved cell adhesion property. The fabricated HbFs@PCL electrospun scaffold exhibits improved fibroblast adherence, proliferation, and deeper fibroblast infiltration into the scaffold compared with the pure PCL scaffold, indicating its potential to be an ECM mimic. This study represents the pioneering utilization of Hb-sourced nanofibrils in the electrospun PCL scaffolds for tissue engineering applications.

Assessing the utility of the PC-PTSD-5 as a screening tool among a cancer survivor sample.

INTRODUCTION: Hematopoietic stem cell transplantation (HCT) is an intensive and invasive procedure used in cancer treatment that can lead to posttraumatic stress disorder (PTSD) symptoms. These symptoms are frequently overlooked in oncology and general health care settings. The suitability and utility of the Primary Care PTSD Screen for DSM-5 (PC-PTSD-5) within the cancer population remains uncertain. This study aims to evaluate its performance as a brief (five-item) case-finding screening alternative to the longer (20-item) PTSD Checklist for DSM-5 (PCL-5) in survivors who received an HCT 1 to 5 years ago. METHODS: A total of 817 cancer survivors completed the PC-PTSD-5 and PCL-5 during recruitment for a randomized clinical trial. Optimal cut scores for identifying probable PTSD and item performance were determined using indices correcting for chance and item response theory analyses. RESULTS: Of the HCT sample, 10.4% screened as positive for probable DSM-5 PTSD using the PCL-5. The PC-PTSD-5 exhibited strong internal consistency and significant associations with PCL-5 scores (total, r = .82; items, rs = .56-.61). A cutoff score of 2 provided optimal sensitivity for screening (κ[Se] = .95), whereas a cut score of 4 demonstrated the highest efficiency for detecting a probable DSM-5 PTSD diagnosis on the PCL-5 (κ[Eff] = .39). Item response theory analyses indicated that item 4 (numbing) of the PC-PTSD-5 yielded the most informative data, with other items potentially lacking incremental utility. CONCLUSION: Although not an instrument validation study, these findings offer efficient evidence for using the PC-PTSD-5 as a succinct screening tool among cancer survivors in a clinical context. TRIALS REGISTRATION: ClinicalTrials.gov, NCT04058795, registered 8/16/2019.

Enhanced differentiation of mesenchymal stem cells in coral-incorporated PCL/elastin scaffold enables 3D defect healing in osteoporosis rat model.

In osteoporosis, bone quality adversely affects the tissue structural competence which increases the risk of a complicated fracture healing. In the present study highly potent scaffold containing natural coral particles was designed and considered for the healing of critical size bone defect in osteoporosis rat model. Scaffold morphological evaluation confirmed the porous nanofibrous structure. Water uptake of about 900 % was obtained for the fabricated scaffold as the result of its composition and three-dimensional structure. Mechanical analysis revealed the compressive modulus of about 50 kPa for the fabricated coral-incorporated nanofibrous structure. In vitro cellular assessments revealed that the designed scaffold induces no toxicity and provides the proper substrate for cell attachment together with increased and prolonged cell proliferation. In vivo experiments demonstrated that implantation of the fabricated scaffold in the femoral defects of osteoporotic rats significantly increased the number of osteocytes and osteoblasts, and enhanced the BTV, and BMP-2 expression compared with the control group. Furthermore, it was observed that seeding the scaffolds with MSCs prior to implantation, resulted in substantial improvements in mRNA expression of the BMP-2 and VEGF genes and considerable enhancement in stereological findings such as significantly higher number of osteoblasts, osteocytes, TVB, and BTV.

Enhanced Marine Biodegradation of Polycaprolactone through Incorporation of Mucus Bubble Powder from Violet Sea Snail as Protein Fillers.

Microplastics' spreading in the ocean is currently causing significant damage to organisms and ecosystems around the world. To address this oceanic issue, there is a current focus on marine degradable plastics. Polycaprolactone (PCL) is a marine degradable plastic that is attracting attention. To further improve the biodegradability of PCL, we selected a completely new protein that has not been used before as a functional filler to incorporate it into PCL, aiming to develop an environmentally friendly biocomposite material. This novel protein is derived from the mucus bubbles of the violet sea snail (VSS, Janthina globosa), which is a strong bio-derived material that is 100% degradable in the sea environment by microorganisms. Two types of PCL/bubble composites, PCL/b1 and PCL/b5, were prepared with mass ratios of PCL to bubble powder of 99:1 and 95:5, respectively. We investigated the thermal properties, mechanical properties, biodegradability, surface structure, and crystal structure of the developed PCL/bubble composites. The maximum biochemical oxygen demand (BOD) degradation for PCL/b5 reached 96%, 1.74 times that of pure PCL (≈55%), clearly indicating that the addition of protein fillers significantly enhanced the biodegradability of PCL. The surface morphology observation results through scanning electron microscopy (SEM) definitely confirmed the occurrence of degradation, and it was found that PCL/b5 underwent more significant degradation compared to pure PCL. The water contact angle measurement results exhibited that all sheets were hydrophobic (water contact angle > 90°) before the BOD test and showed the changes in surface structure after the BOD test due to the newly generated indentations on the surface, which led to an increase in surface toughness and, consequently, an increase in surface hydrophobility. A crystal structure analysis by wide-angle X-ray scattering (WAXS) discovered that the amorphous regions were decomposed first during the BOD test, and more amorphous regions were decomposed in PCL/b5 than in PCL, owing to the addition of the bubble protein fillers from the VSS. The differential scanning calorimeter (DSC) and thermal gravimetric analysis (TGA) results suggested that the addition of mucus bubble protein fillers had only a slight impact on the thermal properties of PCL. In terms of mechanical properties, compared to pure PCL, the mucus-bubble-filler-added composites PCL/b1 and PCL/b5 exhibited slightly decreased values. Although the biodegradability of PCL was significantly improved by adding the protein fillers from mucus bubbles of the VSS, enhancing the mechanical properties at the same time poses the next challenging issue.

Electrospun Ibuprofen-Loaded Blend PCL/PEO Fibers for Topical Drug Delivery Applications.

Electrospun drug-eluting fibers have demonstrated potentials in topical drug delivery applications, where drug releases can be modulated by polymer fiber compositions. In this study, blend fibers of polycaprolactone (PCL) and polyethylene oxide (PEO) at various compositions were electrospun from 10 wt% of polymer solutions to encapsulate a model drug of ibuprofen (IBP). The results showed that the average polymer solution viscosities determined the electrospinning parameters and the resulting average fiber diameters. Increasing PEO contents in the blend PCL/PEO fibers decreased the average elastic moduli, the average tensile strength, and the average fracture strains, where IBP exhibited a plasticizing effect in the blend PCL/PEO fibers. Increasing PEO contents in the blend PCL/PEO fibers promoted the surface wettability of the fibers. The in vitro release of IBP suggested a transition from a gradual release to a fast release when increasing PEO contents in the blend PCL/PEO fibers up to 120 min. The in vitro viability of blend PCL/PEO fibers using MTT assays showed that the fibers were compatible with MEF-3T3 fibroblasts. In conclusion, our results explained the scientific correlations between the solution properties and the physicomechanical properties of electrospun fibers. These blend PCL/PEO fibers, having the ability to modulate IBP release, are suitable for topical drug delivery applications.

A new application of avocado oil to enrich the biological activities of polycaprolactone membranes for tissue engineering.

The metabolites synthesized by plants to protect themselves serves as natural antimicrobial agents used in biomaterials. In this study, avocado oil (AO), was incorporated as a plant source and natural antimicrobial agent into polycaprolactone (PCL) membranes. The effects of varying AO ratios (25, 50, and 100 wt%.-PCL@25AO, PCL@50AO, PCL@100AO) on PCL membrane morphology, chemical structure, wettability, antimicrobial activity, and cell viabilities were investigated. It was demonstrated that the AO acts as a pore-forming agent in solvent-casted membranes. Young's modulus of the membranes varied between 602.68 and 31.92 MPa and more flexible membranes were obtained with increasing AO content. Inhibition zones of AO were recorded between 7.86 and 13.97 mm against clinically relevant microbial strains including bacteria, yeast, and fungi. Antimicrobial activity of AO was retained in PCL membranes at all ratios. Resazurin assay indicated that PCL@25AO membranes were cytocompatible with mouse fibroblast cells (L929 cell line) on day 6 showing 72.4% cell viability with respect to neat PCL membranes. Viability results were supported by scanning electron microscopy images and DAPI staining. The overall results of this study highlight the potential of PCL@25AO membranes as a biomaterial with antimicrobial properties, cytocompatibility, and mechanical strength suitable for various biomedical applications.

Current Status on Management of Primary Plasma Cell Leukemia.

PURPOSEOF REVIEW: Plasma Cell Leukemia (PCL) is a very rare and highly aggressive form of plasma cell dyscrasia. This review seeks to evaluate the outcomes of PCL in the context of combination novel agent therapy and stem cell transplant (SCT) protocols. RECENT FINDINGS: The diagnostic criteria for PCL have now evolved to include patients with 5% circulating PC. While management remains challenging, the incorporation of novel agent-based induction regimen has significantly improved early mortality and reduced attrition of patients proceeding to SCT. In recent prospective clinical trials, patients with PCL demonstrated an overall response rates of 69% to 86%, with progression-free and overall survival ranging from 13.8 to 15.5 months and 24.8 to 36.3 months, respectively. B-cell lymphoma 2 (BCL2) inhibitors, such as venetoclax present a targeted intervention opportunity for patients with PCL with t(11;14). Dedicated clinical trials tailored to PCL are crucial, integrating newer therapies in the frontline setting to further optimize responses and enhance overall outcomes.

Advancing Bioactive Material for Mandibular Bone Regeneration: Transformation of Fibrous Mat into 3D Matrix Cotton for Enhanced Shape Retention and Rapid Hemostasis.

Transformation of a fibrous mat into a three-dimensional (3D) scaffold opens up abundant innovative prospects in biomedical research, particularly for studying both soft as well as hard tissues. Electrospun nanofibers, which mimic the extracellular matrix have attracted significant attention in various studies. This research focuses on rapidly converting a fibrous mat made of polycaprolactone (PCL)/pluronic F-127 (PF-127) with different percentages of monetite calcium phosphate (MCP) into desirable 3D matrix cotton using a unique gas foaming technology. These matrix cottons possess biomimetic properties and have oriented porous structures. Using this innovative technique, various shapes of 3D matrix cotton, such as squares, hollow tubes, and other customizable forms, were successfully produced. Importantly, these 3D matrix cottons showed a consistent distribution of monetite particles with total porosity ranging from 90% to 98%. The structure of the 3D matrix cotton, its water/blood absorption capacity, the potential for causing non-hemolysis, and rapid hemostatic properties were thoroughly investigated. Additionally, periodontal cells were cultured on the 3D matrix cotton to assess their viability and morphology, revealing promising results. Furthermore, a coculture study involving NIH-3T3 and MG-63 cells on the 3D matrix cotton showed spheroidal formation within 24 h. Notably, in vitro assessments indicated that the matrix cotton containing 15% monetite (PCL-MMC15%) exhibited superior absorbent capabilities, excellent cell viability, and rapid hemostatic characteristics. Subsequently, the effectiveness of PCL-MMC15% in promoting mandibular bone regeneration was evaluated through an in vivo study on rabbits using a mandibular injury model. The results demonstrated that PCL-MMC15% facilitated the resolution of defects in the mandibular region by initiating new bone formation. Therefore, the presented 3D matrix cotton (PCL-MMC15%) shows significant promise for applications in both mandibular bone regeneration and hemostasis.

In vitroosteogenesis of hMSCs on collagen membranes embedded within LEGO®-inspired 3D printed PCL constructs for mandibular bone repair.

The field of bone tissue engineering aims to develop an effective and aesthetical bone graft substitute capable of repairing large mandibular defects. However, graft failure resulting from necrosis and insufficient integration with native tissue due to lack of oxygen and nutrient transportation remains a concern. To overcome these drawbacks, this study aims to develop a 3D printed polycaprolactone layered construct with a LEGO®-inspired interlocking mechanism enabling spatial distribution of biological components. To highlight itsin vitroosteogenic potential, human mesenchymal stromal cells are cultured onto Bio-Gide®Compressed collagen (Col) membranes, which are embedded within the layered construct for 28 d. The osteogenic response is assessed through the measurement of proliferation, relevant markers for osteogenesis including alkaline phosphatase (ALP) activity, expression of transcriptional genes (SP7, RUNX2/SOX9) as well matrix-related genes (COL1A1, ALPL IBSP, SPP1), osteoprotegerin secretion.In vitroosteogenic differentiation results showed increased levels of these osteogenic markers, indicating the layered construct's potential to support osteogenesis. In this study, a novel workflow of 3D printing a patient-specific LEGO®-inspired layered construct that can spatially deliver biological elements was successfully demonstrated. These layered constructs have the potential to be employed as a bone tissue engineering strategy, with particular focus on the repair of large mandibular defects.

3D-printed bone regeneration scaffolds modulate bone metabolic homeostasis through vascularization for osteoporotic bone defects.

The treatment of osteoporotic bone defects poses a challenge due to the degradation of the skeletal vascular system and the disruption of local bone metabolism within the osteoporotic microenvironment. However, it is feasible to modulate the disrupted local bone metabolism imbalance through enhanced vascularization, a theory termed "vascularization-bone metabolic balance". This study developed a 3D-printed polycaprolactone (PCL) scaffold modified with EPLQLKM and SVVYGLR peptides (PCL-SE). The EPLQLKM peptide attracts bone marrow-derived mesenchymal stem cells (BMSCs), while the SVVYGLR peptide enhances endothelial progenitor cells (EPCs) vascular differentiation, thus regulating bone metabolism and fostering bone regeneration through the paracrine effects of EPCs. Further mechanistic research demonstrated that PCL-SE promoted the vascularization of EPCs, activating the Notch signaling pathway in BMSCs, leading to the upregulation of osteogenesis-related genes and the downregulation of osteoclast-related genes, thereby restoring bone metabolic balance. Furthermore, PCL-SE facilitated the differentiation of EPCs into "H"-type vessels and the recruitment of BMSCs to synergistically enhance osteogenesis, resulting in the regeneration of normal microvessels and bone tissues in cases of femoral condylar bone defects in osteoporotic SD rats. This study suggests that PCL-SE supports in-situ vascularization, remodels bone metabolic translational balance, and offers a promising therapeutic regimen for osteoporotic bone defects.

Raman spectroscopic investigation of polymer based magnetic multicomponent scaffolds.

Scaffolds acting as an artificial matrix for cell proliferation are one of the bone tissue engineering approaches to the treatment of bone tissue defects. In the presented study, novel multicomponent scaffolds composed of a poly(ε-caprolactone) (PCL), phenolic compounds such as tannic (TA) and gallic acids (GA), and nanocomponents such as silica-coated magnetic iron oxide nanoparticles (MNPs-c) and functionalized multi-walled carbon nanotubes (CNTs) have been produced as candidates for such artificial substitutes. Well-developed interconnected porous structures were observed using scanning electron microscopy (SEM). Raman spectra showed that the highly crystalline nature of PCL was reduced by the addition of nanoadditives. In the case of scaffolds containing MNPs-c and TA, the formation of a Fe-TA complex was concluded because characteristic bands of chelation of the Fe3+ ion by phenolic catechol oxygen appeared. It was found that the necessary conditions for the crystallization of the PCL/MNPs-c/TA are for the catechol groups to be able to penetrate the porous silica shell of MNPs-c, as during experiment with MNPs-c and TA without polymer, no such complexation was observed. Moreover, the number of catechol groups, the spatial structure and molecular size of this phenolic compound are also crucial for complexation process because GA does not form complexes. Therefore, the PCL/CNTs/MNPs-c/TA scaffolds are interesting candidates to consider for their possible medical applications.