Photoactivated Cyclic Polyphthalaldehyde Microcapsules for Payload Delivery.

Microcapsules with a cyclic polyphthalaldehyde (cPPA) shell and oil core were fabricated by an emulsification process. The low ceiling temperature cPPA shell was made phototriggerable by incorporating a photoacid generator (PAG). Photoactivation of the PAG created a strong acid which catalyzed cPPA depolymerization, resulting in the release of the core payload, as quantified by 1H NMR. The high molecular weight cPPA (197 kDa) yielded uniform spherical microcapsules. The core diameter was 24.8 times greater than the cPPA shell thickness (2.4 to 21.6 µm). Nonionic bis(cyclohexylsulfonyl)diazomethane (BCSD) and N-hydroxynaphthalimide triflate (HNT) PAGs were used as the PAG in the microcapsule shells. BCSD required dual stimuli of UV radiation and post-exposure baking at 60 °C to activate cPPA depolymerization while room temperature irradiation of HNT resulted in instantaneous core release. A 300 s UV exposure (365 nm, 10.8 J/cm2) of the cPPA/HNT microcapsules resulted in 66.5 ± 9.4% core release. Faster core release was achieved by replacing cPPA with a phthalaldehyde/propanal copolymer. A 30 s UV exposure (365 nm, 1.08 J/cm2) resulted in 82 ± 13% core release for the 75 mol % phthalaldehyde/25 mol % propanal copolymer microcapsules. The photoresponsive shell provides a versatile polymer microcapsule technology for on-demand, controlled release of hydrophobic core payloads.

Meta-stable state photoacid containing ß-estradiol fragment with photomodulated biological activity and anti-cancer stem cells properties.

Photopharmacology is a young and rapidly developing field of research that offers significant potential for new insights into targeted therapy. While it primarily focuses on cancer treatment, it also holds promise for other diseases. The key feature of photopharmacological agents is the presence of a photosensitive and biologically active component in the same molecule. In our current study, we synthesized a spiropyran-based meta-stable state photoacid containing a fragment of ß-estradiol. This compound exhibits negative photochromism and photocontrolled fluorescence under visible-light irradiation due to the initial stabilization of its self-protonated form in solution. We conducted comprehensive biological studies on the HeLa cells model to assess the short- and long-term cytotoxicity of the photoacid, its metabolic effects, its influence on signaling and epithelial-mesenchymal transition super-system pathways, and the proportion of the population enriched with cancer stem cells. Our findings reveal that this derivative demonstrates low cytotoxicity to HeLa cells, yet it is capable of dramatically reducing malignant cells side population enriched in cancer stem cells. Additionally, appropriate structural modification lead to an increase in some other biological effects compared to ß-estradiol. In particular, our substance possesses rare properties of AP-1 suppression and demonstrates some pro-oxidant and metabolic effects, which can be regulated by visible light irradiation. As a result, the new estradiol-based photoacid may be considered a promising multi-acting photopharmacological agent for the next-generation anti-cancer research & development.

Exceptional Lithography Sensitivity Boosted by Hexafluoroisopropanols in Photoresists.

Advanced lithography requires highly sensitive photoresists to improve the lithographic efficiency, and it is critical, yet challenging, to develop high-sensitivity photoresists and imaging strategies. Here, we report a novel strategy for ultra-high sensitivity using hexafluoroisopropanol (HFIP)-containing fluoropolymer photoresists. The incorporation of HFIP, with its strong electrophilic property and the electron-withdrawing effect of the fluorine atoms, significantly increases the acidity of the photoresist after exposure, enabling imaging without conventional photoacid generators (PAGs). The HFIP-containing photoresist has been evaluated by electron beam lithography to achieve a trench of ~40 nm at an extremely low dose of 3 µC/cm2, which shows a sensitivity enhancement of ~10 times compared to the commercial system involving PAGs, revealing its high sensitivity and high-resolution features. Our results demonstrate a new type of PAGs and a novel approach to higher-performance imaging beyond conventional photoresist performance tuning.

Light-Responsive Shape- and Color-Changing Block Copolymer Particles with Fast Switching Speed.

Polymer particles capable of dynamic shape changes in response to light have received substantial attention in the development of intelligent multifunctional materials. In this study, we develop a light-responsive block copolymer (BCP) particle system that exhibits fast and reversible shape and color transitions. The key molecular design is the integration of spiropyran photoacid (SPPA) molecules into the BCP particle system, which enables fast and dynamic transformations of polystyrene-b-poly(4-vinylpyridine) (PS-b-P4VP) particles in response to light. The SPPA photoisomerization, induced by 420 nm light irradiation, lowers the pH of the aqueous surroundings from 5.5 to 3.3. The protonated P4VP block substantially increases in domain size from 14 to 39 nm, resulting in significant elongation of the BCP particles (i.e., an increase in the aspect ratio (AR) of the particles from 1.8 to 3.4). Moreover, SPPA adsorbed onto the P4VP surface induces significant changes in the luminescent properties of the BCP particles via photoisomerization of SPPA. Notably, the BCP particles undergo fast, dynamic shape and color transitions within a period of 10 min, maintaining high reversibility over multiple light exposures. Functional dyes are selectively incorporated into different domains of the light-responsive BCP particles to achieve different ranges of color responses. Thus, this study showcases a light-responsive hydrogel display capable of reversible and multicolor photopatterning.

Visible Light-Regulated Ring-Opening Polymerization of Lactones by Employing Indigo as a Photoacid Catalyst.

The development of visible light-regulated polymerizations for precision synthesis of polymers has drawn considerable attention in the past years. In this study, an ancient dye, indigo, is successfully identified as a new and efficient photoacid catalyst, which can readily promote the ring-opening polymerization of lactones under visible light irradiation in a well-controlled manner, affording the desired polyester products with predictable molecular weights and narrow dispersity. The enhanced acidity of indigos by excitation is crucial to the H-bonding activation of the lactone monomers. Chain extension and block copolymer synthesis are also demonstrated with this method.

Photoacid Generators for Biomedical Applications.

Photoacid generators (PAGs) are compounds capable of producing hydrogen protons (H+ ) upon irradiation, including irreversible and reversible PAGs, which have been widely studied in photoinduced polymerization and degradation for a long time. In recent years, the applications of PAGs in the biomedical field have attracted more attention due to their promising clinical value. So, an increasing number of novel PAGs have been reported. In this review, the recent progresses of PAGs for biomedical applications is systematically summarized, including tumor treatment, antibacterial treatment, regulation of protein folding and unfolding, control of drug release and so on. Furthermore, a concept of water-dependent reversible photoacid (W-RPA) and its antitumor effect are highlighted. Eventually, the challenges of PAGs for clinical applications are discussed.

Customizable High-Contrast Optical Responses: Dual Photosensitive Colors for Smart Textiles.

Smart textiles demonstrating optical responses to external light stimuli hold great promise as functional materials with a wide range of applications in personalized decoration and information visualization. The incorporation of high-contrast, vivid, and real-time optical signals, such as color change or fluorescence emission, to indicate light on/off states is both crucial and challenging. In this study, we have developed a dual output photosensitive dye system possessing photochromic and photofluorescent properties, which was successfully applied to the dyeing and finishing processes of cotton fabrics. The design and fabrication of this dye system were based on the unique photoinduced proton transfer (PPT) principle exhibited by the water-soluble spiropyran (trans-MCH) molecule. The dual output response relies on the open-/closed-loop mechanism, wherein light regulates the trans-MCH molecule. Upon excitation by UV or visible light, the dye system and dyed fabrics display significant color changes and fluorescence switching in a real-time and highly reversible manner. Moreover, diverse photosensitive color systems can be tailored by direct blending with commercially available water-soluble dyes. By integrating high-contrast dual optical outputs into this scalable, versatile, and reversible dye system, we envisage the development and design of smart textiles capable of producing high-end products.

Recent Advances in Monocomponent Visible Light Photoinitiating Systems Based on Sulfonium Salts.

During the last decades, multicomponent photoinitiating systems have been the focus of intense research efforts, especially for the design of visible light photoinitiating systems. Although highly reactive three-component and even four-component photoinitiating systems have been designed, the complexity to elaborate such mixtures has incited researchers to design monocomponent Type II photoinitiators. Using this approach, the photosensitizer and the radical/cation generator can be combined within a unique molecule, greatly simplifying the elaboration of the photocurable resins. In this field, sulfonium salts are remarkable photoinitiators but these structures lack absorption in the visible range. Over the years, various structural modifications have been carried out in order to redshift their absorptions in the visible region. In this work, an overview of the different sulfonium salts activable under visible light and reported to date is proposed.

Novel Mechanism-Based Descriptors for Extreme Ultraviolet-Induced Photoacid Generation: Key Factors Affecting Extreme Ultraviolet Sensitivity.

Predicting photolithography performance in silico for a given materials combination is essential for developing better patterning processes. However, it is still an extremely daunting task because of the entangled chemistry with multiple reactions among many material components. Herein, we investigated the EUV-induced photochemical reaction mechanism of a model photoacid generator (PAG), triphenylsulfonium cation, using atomiC-Scale materials modeling to elucidate that the acid generation yield strongly depends on two main factors: the lowest unoccupied molecular orbital (LUMO) of PAG cation associated with the electron-trap efficiency 'before C-S bond dissociation' and the overall oxidation energy change of rearranged PAG associated with the proton-generation efficiency 'after C-S bond dissociation'. Furthermore, by considering stepwise reactions accordingly, we developed a two-parameter-based prediction model predicting the exposure dose of the resist, which outperformed the traditional LUMO-based prediction model. Our model suggests that one should not focus only on the LUMO energies but also on the energy change during the rearrangement process of the activated triphenylsulfonium (TPS) species. We also believe that the model is well suited for computational materials screening and/or inverse design of novel PAG materials with high lithographic performances.

Long-Lived Photoacid-Doped Conducting Composites Induce Photocurrent for Efficient Wound Healing.

Electrical stimulation is an effective strategy for facilitating wound healing. However, it is hindered by unwieldy electrical systems. In this study, a light-powered dressing based on long-lived photoacid generator (PAG)-doped polyaniline composites is used, which can generate a photocurrent under visible light irradiation to interact with the endogenous electric field and facilitate skin growth. Light-controlled proton binding and dissociation result in oxidation and reduction of the polyaniline backbone, inducing charge transfer to generate a photocurrent. Due to the rapid intramolecular photoreaction of PAG, a long-lived proton-induced localized acidic environment is formed, which protects the wound from microbial infection. In summary, a simple and effective therapeutic strategy is introduced for light-powered and biocompatible wound dressings that show great potential for wound treatment.

A General Metal-Free Protocol for the Visible-Light-Driven Protection of Carbonyls.

The protection of a carbonyl is a standard procedure to mask the reactivity of this group towards nucleophiles and reductants. The present work pointed out the potentialities of arylazo sulfones as non-ionic photoacid generators (PAGs) to promote the efficient conversion of aldehydes and ketones into acetals, ketals, and 1,3-oxazolidines upon visible-light irradiation. This approach employed mild conditions and exhibited an easy scalability and a broad scope (80 examples included).

Isocyanonaphthol Derivatives: Excited-State Proton Transfer and Solvatochromic Properties.

Fluorescent probes that exhibit solvatochromic or excited-state proton-transfer (ESPT) properties are essential tools for the study of complex biological or chemical systems. Herein, the synthesis and characterization of a novel fluorophore that reveals both features, 5-isocyanonaphthalene-1-ol (ICOL), are reported. Various solvatochromic methods, such as Lippert−Mataga and Bilot−Kawski, together with time-dependent density functional theory (TD-DFT) and time-resolved emission spectroscopy (TRES), were applied to gain insights into its excited-state behavior. To make comparisons, the octyloxy derivative of ICOL, 5-isocyano-1-(octyloxy)naphthalene (ICON), was also prepared. We found that internal charge transfer (ICT) takes place between the isocyano and −OH groups of ICOL, and we determined the values of the dipole moments for the ground and excited states of both ICOL and ICON. Furthermore, in the emission spectra of ICOL, a second band at higher wavelengths (green emission) in solvents of higher polarities (dual emission), in addition to the band present at lower wavelengths (blue emission), were observed. The extent of this dual emission increases in the order of 2-propanol < methanol < N,N-dimethylformamide (DMF) < dimethyl sulfoxide (DMSO). The presence of the dual fluorescence of ICOL in these solvents can be ascribed to ESPT. For ICOL, we also determined ground- and excited-state pKa values of 8.4 ± 0.3 and 0.9 ± 0.7, respectively, which indicates a considerable increase in acidity upon excitation. The TRES experiments showed that the excited-state lifetimes of the ICOL and ICON spanned from 10.1 ns to 5.0 ns and from 5.7 ns to 3.8 ns, respectively. In addition, we demonstrated that ICOL can be used as an effective indicator of not only the critical micelle concentration (cmc) of ionic (sodium lauryl sulfate (SLS)) and nonionic surfactants (Tween 80), but also other micellar parameters, such as partition coefficients, as well as to map the microenvironments in the cavities of biomacromolecules (e.g., BSA). It is also pointed out that fluorescence quenching by pyridine can effectively be utilized for the determination of the fractions of ICOL molecules that reside at the water−micelle interface and in the interior spaces of micelles.

Chitosan-based organic/inorganic composite engineered for UV light-controlled smart pH-responsive pesticide through in situ photo-induced generation of acid.

BACKGROUND: Confined by the volatile property, pesticides are overused and lost significantly during and after spraying, weakening the ecological microbalance among different species of lives. Acid-responsive pesticide is a type of smartly engineered pesticides that contribute to the improvement of utilization efficiency of pesticidal active ingredients in acid-controlled manner, whilst the implementation of acidic solutions may disturb the balance of microenvironment surrounding targeted plants or cause secondary pollution, underscoring the input of acid in a more precise strategy. RESULTS: Chitosan was chemically modified with a photoacid generator (2-nitrobenzaldehyde) serving as a light-maneuvered acid self-supplier, based on which a smart pesticide was formulated by the integration of attapulgite and organophosphate insecticide chlorpyrifos. Under the irradiation of UV light (365 nm), the modified chitosan would undergo a photolytic reaction to generate an acid and pristine chitosan, which seized the labile protons and facilitated the release of chlorpyrifos based on its inherent pH-responsive flexibility. According to the pesticide release performance, the release rate of chlorpyrifos under UV light (27.2 mW/cm2 ) reached 78%, significantly higher than those under sunlight (22%, 4.2 mW/cm2 ) and in the dark (20%) within the same time, consistent with the pH reduction to 5.3 under UV light and no obvious pH change for the two other situations, exhibiting an attractive UV light-controlled, acid-propelled release behavior. CONCLUSION: Compared to direct acid spray approach, the proposed in situ photo-induced generation of acid locally on the spots of applied pesticide circumvents the problem of acid contamination to nontargets, demonstrating higher efficiency and biocompatibility for the controlled delivery of acid-responsive pesticides and pest management. © 2022 Society of Chemical Industry.

Fate of bis-(4-tert-butyl phenyl)-iodonium under photolithography relevant irradiation and the environmental risk properties of the formed photoproducts.

Aryl-iodonium salts are utilized as photoacid generators (PAGs) in semiconductor photolithography and other photo-initiated manufacturing processes. Despite their utilization and suspected toxicity, the fate of these compounds within the perimeter of semiconductor fabrication plants is inadequately understood; the identification of photolithography products is still needed for a comprehensive environmental impact assessment. This study investigated the photolytic transformation of a representative iodonium PAG cation, bis-(4-tert-butyl phenyl)-iodonium, under conditions simulating industrial photolithography. Under 254-nm irradiation, bis-(4-tert-butyl phenyl)-iodonium reacted rapidly with a photolytic half-life of 39.2 s; different counter ions or solvents did not impact the degradation kinetics. At a semiconductor photolithography-relevant UV dosage of 25 mJ cm-2, 33% of bis-(4-tert-butyl phenyl)-iodonium was estimated to be transformed. Six aromatic/hydrophobic photoproducts were identified utilizing a combination of HPLC-DAD and GC-MS. Selected photoproducts such as tert-butyl benzene and tert-butyl iodobenzene had remarkably higher acute microbial toxicity toward bacterium Aliivibrio fischeri compared to bis-(4-tert-butyl phenyl)-iodonium. Octanol-water partition coefficients estimated using the Estimation Programs Interface Suite™ indicated that the photoproducts were substantially more hydrophobic than the parent compound. The results fill a critical data gap hindering the environmental impact assessment of iodonium PAGs and provide clues on potential management strategies for both iodonium compounds and their photoproducts.

Wavelength-Orthogonal Stiffening of Hydrogel Networks with Visible Light.

Herein, we introduce the wavelength-orthogonal crosslinking of hydrogel networks using two red-shifted chromophores, i.e. acrylpyerene (AP, λactivation =410-490 nm) and styrylpyrido[2,3-b]pyrazine (SPP, λactivation =400-550 nm), able to undergo [2+2] photocycloaddition in the visible-light regime. The photoreactivity of the SPP moiety is pH-dependent, whereby an acidic environment inhibits the cycloaddition. By employing a spiropyran-based photoacid generator with suitable absorption wavelength, we are able to restrict the activation wavelength of the SPP moiety to the green light region (λactivation =520-550 nm), enabling wavelength-orthogonal activation of the AP group. Our wavelength-orthogonal photochemical system was successfully applied in the design of hydrogels whose stiffness can be tuned independently by either green or blue light.

Photopatterning of Carbon Dots in Poly(vinyl alcohol) with Photoacid Generators.

Carbon dots (CDs) have drawn considerable attention owing to their attractive photoluminescence, advantageous chemical tolerance, good biocompatibility, and so on. However, it remains challenging to tune their photoluminescence spatially and temporally due to their high photostability. Herein, a viable approach to in-situ dialing the photoluminescence of CDs by using light in the presence of a photoacid generator (PAG, e.g., diphenyliodonium hexafluorophosphate) is demonstrated. Fluorescence quenching occurs upon light irradiation due to the protonation of pyridine and amino nitrogen atoms of CDs according to X-ray photoelectron spectroscopy and cyclic voltammetry. As such, blue, green, and red color fluorescent patterns of CDs are ready to form in poly(vinyl alcohol) by light irradiation under photomask. These patterns not only show a controlled preservation time under room light, but also can be erased on demand by flood UV irradiation, which are promising for advanced anti-counterfeiting such as shelf-life based security and erasable encryption.

Aesculetin Exhibits Strong Fluorescent Photoacid Character.

Coumarins are bioactive molecules that often serve as defenses in plant and animal systems, and understanding their fundamental behavior is essential for understanding their bioactivity. Aesculetin (6,7-dihydroxycoumarin) has recently attracted attention due to its ability to act as an antioxidant, but little is known about its photophysical properties. The fluorescence lifetimes of its neutral and anion form in water are 19 ± 2 ps and 2.3 ± 0.1 ns, respectively. Assuming the short lifetime of the neutral is determined by ESPT, we estimate kPT ~ 5 × 1010 s-1. Using steady-state and time-resolved fluorescence spectroscopy, we determine its ground and excited-state [Formula: see text] to be 7.3 and -1, respectively, making it one of the strongest photoacids of the natural coumarins. Aesculetin exhibits a strong pH dependence of the relative fluorescence quantum yield becoming much more fluorescent above [Formula: see text]. The aesculetin anion [Formula: see text] slightly photobasic character. We also report that aesculetin forms a fluorescent catechol-like complex with boric acid, and this complex has a [Formula: see text] of 5.6.

Embedding Photoacids into Polymer Opal Structures: Synergistic Effects on Optical and Stimuli-Responsive Features.

Opal films with their vivid structural colors represent a field of tremendous interest and obtained materials offer the possibility for many applications, such as optical sensors or anti-counterfeiting materials. A convenient method for the generation of opal structures relies on the tailored design of core-interlayer-shell (CIS) particles. Within the present study, elastomeric opal films were combined with stimuli-responsive photoacids to further influence the optical properties of structurally colored materials. Starting from cross-linked polystyrene (PS) core particles featuring a hydroxy-rich and polar soft shell, opal films were prepared by application of the melt-shear organization technique. The photoacid tris(2,2,2-trifluoroethyl) 8-hydroxypyrene-1,3,6-trisulfonate (TFEHTS) could be conveniently incorporated during freeze-drying the particle dispersion and prior to the melt-shear organization. Furthermore, the polar opal matrix featuring hydroxylic moieties enabled excited-state proton transfer (ESPT), which is proved by spectroscopic evaluation. Finally, the influence of the photoacid on the optical properties of the 3-dimensional colloidal crystals were investigated within different experimental conditions. The angle dependence of the emission spectra unambiguously shows the selective suppression of the photoacid's fluorescence in its deprotonated state.

Proton-Transfer Dynamics of Photoacidic Merocyanines in Aqueous Solution.

Photoacids attract increasing scientific attention, as they are valuable tools to spatiotemporally control proton-release reactions and pH values of solutions. We present the first time-resolved spectroscopic study of the excited state and proton-release dynamics of prominent merocyanine representatives. Femtosecond transient absorption measurements of a pyridine merocyanine with two distinct protonation sites revealed dissimilar proton-release mechanisms: one site acts as a photoacid generator as its pKa value is modulated in the ground state after photoisomerization, while the other functions as an excited state photoacid which releases its proton within 1.1 ps. With a pKa drop of 8.7 units to -5.5 upon excitation, the latter phenolic site is regarded a super-photoacid. The 6-nitro derivative exhibits only a phenolic site with similar, yet slightly less photoacidic characteristics and both compounds transfer their proton to methanol and ethanol. In contrast, for the related 6,8-dinitro compound an intramolecular proton transfer to the ortho-nitro group is suggested that is involved in a rapid relaxation into the ground state.

Multiswitchable photoacid-hydroxyflavylium-polyelectrolyte nano-assemblies.

Light- and pH-responsive nano-assemblies with switchable size and structure are formed by the association of a photoacid, anthocyanidin, and a linear polyelectrolyte in aqueous solution. Specifically, anionic disulfonated naphthol derivatives, neutral hydroxyflavylium, and cationic poly(allylamine) are used as building blocks for the ternary electrostatic self-assembly, forming well-defined supramolecular assemblies with tunable sizes of 50 to 500 nm. Due to the network of possible chemical reactions for the anthocyanidin and the excited-state dissociation of the photoacid upon irradiation, different ways to alter the ternary system through external triggering are accessible. The structure and trigger effects can be controlled through the component ratios of the samples. Dynamic and static light scattering (DLS, SLS) and ζ-potential measurements were applied to study the size and the stability of the particles, and information on the molecular structure was gained by UV-vis spectroscopy. Isothermal titration calorimetry (ITC) provided information on the thermodynamics and interaction forces in the supramolecular assembly formation.