Synthesis of Ag/CuS doped mineral magnetite nanocomposite with improved photocatalytic activity against tetracycline and diclofenac pollutants.

The contamination of water sources by pharmaceutical pollutants presents significant environmental and health hazards, making the development of effective photocatalytic materials crucial for their removal. This research focuses on the synthesis of a novel Ag/CuS/Fe3O4 nanocomposite and its photocatalytic efficiency against tetracycline (TC) and diclofenac contaminants. The nanocomposite was created through a straightforward and scalable precipitation method, integrating silver nanoparticles (AgNPs) and copper sulfide (CuS) into a magnetite framework. Various analytical techniques, including X-ray diffraction (XRD), scanning electron microscopy (SEM), Fourier transform infrared spectroscopy (FTIR),ultraviolet-visible spectrophotometry (UV-Vis) and energy-dispersive X-ray spectroscopy (EDS), were employed to characterize the structural and morphological properties of the synthesized material. The photocatalytic activity was tested by degrading tetracycline and diclofenac under visible light. Results indicated a marked improvement in the photocatalytic performance of the Ag/CuS/Fe3O4 nanocomposite (98%photodegradation of TC 60 ppm in 30 min) compared to both pure magnetite and CuS/Fe3O4. The enhanced photocatalytic efficiency is attributed to the synergistic interaction between AgNPs, CuS, and Fe3O4, which improves light absorption and charge separation, thereby increasing the generation of reactive oxygen species (ROS) and promoting the degradation of the pollutants. The rate constant k of photodegradation was about 0.1 min-1 for catalyst dosages 0.02 g. Also the effect of photocatalyst dose and concentration of TC and pH of solution was tested. The modified photocatalyst was also used for simultaneous photodegradation of TC and diclofenac successfully. This study highlights the potential of the Ag/CuS/Fe3O4 nanocomposite as an efficient and reusable photocatalyst for eliminating pharmaceutical pollutants from water.

Novel MoS2-In2O3-WS2 (2D/3D/2D) ternary heterostructure nanocomposite material: Efficient photocatalytic degradation of antimicrobial agents under visible-light.

Fabrication of ternary composited photocatalytic nanomaterials with strong interaction is vital to deriving the fast charge separation for efficient photodegradation of organic contaminants in wastewater under visible light. In this work, novel ternary 2D/3D/2D MoS2-In2O3-WS2 multi-nanostructures were synthesized using facile hydrothermal processes. XRD, FTIR, and XPS results confirmed the phase, functional groups, and element composition of pure MoS2, MoS2-In2O3, and MoS2-In2O3-WS2 hybrids. UV-DRS spectra of the MoS2-In2O3-WS2 ternary hybrid indicate maximum absorption in the visible light range with a band-gap energy value of 2.4 eV. The surface of the 2D WS2 nanosheet structure tightly blends and densely disperses 2D MoS2 nanosheets and 3D In2O3 nanocubes. This confirmed the formation of the MoS2-In2O3-WS2 ternary hybrid in the form of 2D/3D/2D multi-nanostructures, which is also indicated from SEM and HR-TEM images. The synthesized MoS2-In2O3-WS2 ternary hybrid showed maximum photocatalytic activity under visible-light for antimicrobial agents such as triclosan (TCS) and trichlorocarban (TCC). The photocatalytic activity of TCS was revealed to be 95% at 90 min, while that of TCC was 93% at 100 min. The reusability and stability tests of the prepared MoS2-In2O3-WS2 ternary hybrid after four consecutive photocatalytic cycles were analyzed by FTIR and SEM, which indicated that the prepared ternary hybrid was very stable. Overall results suggested that the developed MoS2-In2O3-WS2 (2D/3D/2D) multi-nanostructures are environmentally friendly and low-cost nanocomposites as a potential photocatalyst for the removal of antimicrobial agents from wastewater.

Facile Construction Engineering of Pr6O11@C with Efficient Photocatalytic Activity.

In this study, facile construction engineering of Pr6O11@C with efficient photocatalytic activity was established. Taking advantage of the flocculation of Pr3+ in the base medium, acid red 14 (AR14) was flocculated together with Pr(OH)3 precipitate, in which Pr(OH)3 and AR14 mixed highly uniformly. Calcinated at high temperature in N2, a novel Pr6O11@C was successfully synthesized. The resulting materials were characterized by XRD, SEM, FT-IR, Raman, and XPS techniques. The results show that the cubic Pr6O11@C with Fm3m space group, similar to that of Pr6O11, was obtained. From the results of the photodegradation of AR14, it is found that the photocatalytic efficiency of Pr6O11@C is higher than that of pure Pr6O11 due to the formation of abundant carbon bonds and oxygen vacancies. Compared with pure Pr6O11 and other carbon-based composites, the acid resistance of Pr6O11@C is greatly improved due to the highly uniform dispersion of Pr6O11 and C, which lays a solid foundation for the practical application of Pr6O11@C. Moreover, the role of NH3·H2O and NaOH used as precipitants for the photocatalytic efficiency of Pr6O11 was investigated in detail.

Optimizing photocatalytic performance with Ag-doped ZnO nanoparticles: Synthesis and characterization.

The development of nanotechnology has significantly impacted the improvement of photocatalytic performance of ZnO NPs. In this study synthesis of pure ZnO and Ag-ZnO nanoparticles via a co-precipitation method at varying Ag concentrations (1 %, 2 %, 3 %, 4 % and 6 %) to enhance their photo catalytic efficacy. X-ray diffraction (XRD) analysis estimates crystallite size which decreased by increasing Ag concentration, ranging from 30.6 nm (Pure ZnO) to 22.5 nm 6 % Ag-doped ZnO. Scanning electron microscopy (SEM) revealed decrease in particle size with increasing Ag content. UV-Vis spectroscopy indicating a narrowed band gap of optimal sample. Photocatalytic activity of the synthesized nanoparticles was evaluated using methylene orange (MO) dye degradation under light irradiation. The MO concentration exhibited a decrease with increasing irradiation time in the presence of photocatalysts. Recombination rate of NPs decreases by increasing the concentration of Ag i.e. 4%Ag dope ZnO NPs have lowest recombination rate and maximum degradation efficiency. FTIR analysis confirms the preparation of Ag-doped ZnO NPs. This improvement can be credited to the synergistic effect of Ag doping, leading to a narrowed band gap and potentially maximum degradation of MO by using Ag-doped ZnO NPs.

Buoyancy-Assisted Fabrication of Liquid Diode: Janus Nanofibrous Membrane for Efficient Wastewater Treatment.

The pressing need for effective methods to separate oil and water in oily wastewater has spurred the development of innovative solutions. This work presents the creation and evaluation of a Janus nanofibrous membrane, also known as the Liquid Diode, developed using electrospinning (e-spinning) and buoyancy-assisted hydrothermal techniques. The membrane features a unique structure: one side is composed of PVDF nanofibers embedded with a GO/TiO2 composite, exhibiting in-air superhydrophobic and superoleophilic properties, while the reverse side consists of PVDF nanofibers with a ZnO nanorod array, demonstrating in-air superhydrophilic and underwater (UW) superoleophobic properties. This distinct asymmetric wettability enables the membrane to effectively separate both water-in-oil (w-in-o) and oil-in-water (o-in-w) emulsions, achieving an impressive liquid flux and separation efficiency (SEff). The in-air superhydrophobic side of the Janus nanofibrous membrane achieves a maximum oil flux (Fo) of 3506 ± 250 L m-2 h-1, while the in-air superhydrophilic side achieves a maximum water flux (Fw) of 1837 ± 150 L m-2 h-1, with SEff exceeding 98% for both sides. Furthermore, the Janus nanofibrous membrane maintained reliable mechanical stability after 10 cycles of sandpaper abrasion test and demonstrated excellent chemical stability when subjected to acidic, alkaline, cold water and hot water conditions for 24 h. These properties, combined with its ability in breaking down of organic contaminants (98% ± 2% in 210 min) and pharmaceutical contaminants (97% ± 2% in 210 min) under visible light, highlight its photocatalytic potential. Additionally, the membrane's antifouling and antibacterial properties suggest long-term and sustainable use in wastewater treatment applications. The synergistic combination of these superior properties positions the Janus nanofibrous membrane as a promising solution for addressing complex challenges in wastewater treatment and environmental remediation.

Green synthesis of zinc ferrite nanoparticles from Nyctanthes arbor-tristis: unveiling larvicidal potential, protein binding affinity and photocatalytic activities.

Environmental pollution, being a major concern worldwide, needs a unique and ecofriendly solution. To answer this, researchers are aiming in utilizing plant extracts for the synthesis of nanoparticles. These NPs synthesized using plant extracts provide a potential, environmentally benign technique for biological and photocatalytic applications. Especially, plant leaf extracts have been safe, inexpensive, and eco-friendly materials for the production of nanoparticles in a greener way. In this work, zinc ferrite nanoparticles (ZnFe2O4 NPs) were prepared using Nyctanthes arbor-tristis leaf extract by hydrothermal method, and its biological and photocatalytic properties were assessed. The synthesized ZnFe2O4 NPs were characterized using powder X-ray diffraction (XRD), scanning electron microscopy (SEM), and Fourier-transform infrared spectroscopy (FT-IR). X-ray diffraction confirmed the arrangement of the fcc crystal structure of the nanoparticles and that some organic substances were encapsulated within the zinc ferrite. According to the SEM analysis, the resulting nanoparticles got agglomerated and spherical in shape. The ZnFe2O4 nanoparticles are in their pure form, and all of their elemental compositions were shown by the energy-dispersive X-ray analysis (EDAX) spectrum. The FTIR results revealed that the produced nanoparticles contained distinctive functional groups. Fluorescence spectroscopy was used to examine the binding affinities between bovine serum albumin (BSA) and ZnFe2O4 nanoparticles in terms of protein binding, stability, and conformation. The interaction between BSA and ZnFe2O4 NPs was examined using steady-state and time-resolved fluorescence measurements, and it was evident that static quenching occurred. The ability of ZnFe2O4 nanoparticles to kill Culex quinquefasciatus (C. quinquefasciatus) larvae was evaluated. The synthesized NPs demonstrated a noteworthy toxic effect against the fourth instar larvae of C. quinquefasciatus with LC50 values of 43.529 µg/mL and LC90 values of 276.867 µg/mL. This study revealed the toxicity of green synthesized ZnFe2O4 NPs on mosquito larvae, proving that these NPs are good and effective larvicides. Furthermore, the ZnFe2O4 NPs were utilized for dye degradation of methylene blue under visible light treatment and achieved 99.5% degradation.

Green synthesis of novel Zn0.5Ni0.5FeCrO4 spinel magnetic nanoparticles: Photodegradation of 4-nitrophenol and aniline under visible light irradiation.

This study explores novel nanoparticles used in environmental remediation of 4-nitrophenol and aniline from wastewater bodies. The Zn0.5Ni0.5FeCrO4 magnetic nanoparticles (MNPs) were synthesized using tragacanth gel as a green, low-cost, and easy sol-gel method. The MNPs were characterized by XRD, XPS, FT-IR, VSM, TEM, EDX, FESEM, BET, DRS, and elemental mapping. The analysis demonstrated that nanoparticles have a spinel cubic structure, spatial distribution of the elements, ferromagnetic activity, narrow bandgap, and uniform morphology. Furthermore, effectiveness of the developed MNPs to degrade recalcitrant organic pollutants such as 4-nitrophenol (4-NP) and aniline under visible light exposure were studied. The results indicated 95% aniline and 80% of 4-NP were successfully degraded in 180 and 150 min, respectively. The total organic carbon (TOC) analysis revealed 65% and 54% removal of aniline and 4-NP. LC-MS was employed to elucidate the photodegradation mechanism and to identify the degradation products, including small fragmented molecules.

Enhanced visible-light photocatalytic activity of N-doped C/Na2Ti6O13/TiO2 hollow spheres for efficient dye degradation.

Doping and hybridization with other semiconductors are highly effective ways to address the limitations, including their weak response to visible light and significant recombination of photogenerated carriers. In addition, the assisted carbon on the catalyst surface and the structural design have the advantage of being catalytically active. Herein, visible-light-active N-doped C/Na2Ti6O13/TiO2 hollow spheres (denoted as N-C/NTO/TiO2 HS) were successfully prepared using a facile two-step method and evaluated for methylene blue (MB) aqueous solution degradation under visible-light irradiation. The as-obtained N-C/NTO/TiO2 HS demonstrated improved photocatalytic efficiency (94 %) and pseudo-first-order kinetic degradation rate (0.023 min-1). Moreover, after three cycles of testing, N-C/NTO/TiO2 HS showed a 91 % degradation rate in its photostability. The enhanced photocatalytic performance was attributed to the combined effects of N-doping, carbon species on the surface, and the coupling of TiO2 and Na2Ti6O13 using morphology engineering. Finally, based on the experimental results, a possible photocatalytic mechanism was proposed. This study provides a rational approach toward the development of high-performance titanate-based photocatalysts for solar energy-assisted wastewater treatment.

The Intrinsic Relationship between Photoluminescence and Photocatalysis of MMoO4/MWO4 (M = Mg, Ca, Sr and Ba) Heterojunctions: Heterojunction Construction, Mechanism Insight and Development Tendency.

The migration behavior of electron and hole pairs determines both photoluminescence and photocatalytic activity, which are two distinct properties of semiconductor materials. The photoluminescence and photocatalytic activity of semiconductor materials also exhibit strong method-dependent behavior under the influence of synthesis methods. In this review, the synthesis methods of MMoO4, MWO4 and MMoO4/MWO4 (M = Mg, Ca, Sr and Ba) heterojunction composites and their photoluminescence and photocatalytic activities are reviewed for the first time. The effects of different M ions on the photoluminescence and photocatalytic activity of MMoO4/MWO4 heterojunction composites are also reviewed. There is also a discussion about the intrinsic correlation mechanism between photoluminescence and photocatalytic activity. Different M ions result in different coordination environments in MMoO4/MWO4 heterojunction composites, which leads to different photoluminescence and photocatalytic mechanisms of different MMoO4/MWO4 heterojunction composites. This review provides theoretical reference and technical guidance for future research on MMoO4/MWO4 heterojunction composites.

Constructing Direct Z-Scheme Y2TmSbO7/GdYBiNbO7 Heterojunction Photocatalyst with Enhanced Photocatalytic Degradation of Acetochlor under Visible Light Irradiation.

This study presents a pioneering synthesis of a direct Z-scheme Y2TmSbO7/GdYBiNbO7 heterojunction photocatalyst (YGHP) using an ultrasound-assisted hydrothermal synthesis technique. Additionally, novel photocatalytic nanomaterials, namely Y2TmSbO7 and GdYBiNbO7, were fabricated via the hydrothermal fabrication technique. A comprehensive range of characterization techniques, including X-ray diffractometry, Fourier-transform infrared spectroscopy, Raman spectroscopy, UV-visible spectrophotometry, X-ray photoelectron spectroscopy, transmission electron microscopy, X-ray energy-dispersive spectroscopy, fluorescence spectroscopy, photocurrent testing, electrochemical impedance spectroscopy, ultraviolet photoelectron spectroscopy, and electron paramagnetic resonance, was employed to thoroughly investigate the morphological features, composition, chemical, optical, and photoelectric properties of the fabricated samples. The photocatalytic performance of YGHP was assessed in the degradation of the pesticide acetochlor (AC) and the mineralization of total organic carbon (TOC) under visible light exposure, demonstrating eximious removal efficiencies. Specifically, AC and TOC exhibited removal rates of 99.75% and 97.90%, respectively. Comparative analysis revealed that YGHP showcased significantly higher removal efficiencies for AC compared to the Y2TmSbO7, GdYBiNbO7, or N-doped TiO2 photocatalyst, with removal rates being 1.12 times, 1.21 times, or 3.07 times higher, respectively. Similarly, YGHP demonstrated substantially higher removal efficiencies for TOC than the aforementioned photocatalysts, with removal rates 1.15 times, 1.28 times, or 3.51 times higher, respectively. These improvements could be attributed to the Z-scheme charge transfer configuration, which preserved the preferable redox capacities of Y2TmSbO7 and GdYBiNbO7. Furthermore, the stability and durability of YGHP were confirmed, affirming its potential for practical applications. Trapping experiments and electron spin resonance analyses identified active species generated by YGHP, namely •OH, •O2-, and h+, allowing for comprehensive analysis of the degradation mechanisms and pathways of AC. Overall, this investigation advances the development of efficient Z-scheme heterostructural materials and provides valuable insights into formulating sustainable remediation strategies for combatting AC contamination.

Imparting Photocatalytic and Antioxidant Properties to Electrospun Poly(L-lactide-co-D,L-lactide) Materials.

The focus of the present study is on the fabrication of effective and eco-friendly hybrid electrospun materials based on poly(L-lactide-co-D,L-lactide) (PLDLLA), Fe3O4 and ZnO with an appropriate design for antioxidant and photocatalytic performance. The design of the fibrous materials was purposely tailored in one step by electrospinning and simultaneous electrospinning/electrospraying. Electrospinning of PLDLLA and its mixture with Fe3O4 resulted in the fabrication of materials with design type "in". Furthermore, the surface of the electrospun PLDLLA and Fe3O4-in-PLDLLA was decorated with ZnO particles by simultaneous electrospraying, thus materials with design type "on" were obtained. In this case, quaternized N,N,N-trimethyl chitosan iodide (QCOS) was used as a sticking agent of ZnO particles onto the fiber's surface. Different structures and morphologies of the electrospun materials were observed by SEM equipped with EDX and TEM. TGA and XRD analyses show that the presence of inorganic particles had an impact on the thermal properties and crystallinity of the electrospun materials. Furthermore, the material type "on" showed improved wettability with a water contact angle less than 90° compared to the material type "in" with an angle larger than 90°. In particular, the presence of Fe3O4 imparts complementary magnetic properties, while ZnO considerably increased the antioxidant activity of the fibrous materials. Materials with design type "on" displayed over 70% radical scavenging capacity in contrast to the material type "in" with less than 20% capacity within 30 min of contact. Moreover, the purposely tailored design type "on" materials provided excellent photocatalytic degradation of model organic pollutant methylene blue dye under UV light irradiation even after 5-fold use, and at the end of the fifth cycle these materials degraded more than 90% of the dye. These results reveal not only a strategy for the fabrication of electrospun hybrid bio-based materials with targeted design but also provide a promising, simple and effective way for mitigating water pollution.

Defect-mediated Fermi level modulation boosting photo-activity of spatially-ordered S-scheme heterojunction.

Spatially-ordered S-scheme photocatalysts are intriguing due to their enhanced light harvesting, spatially isolated redox sites, and strong redox abilities. Nonetheless, heightening the performance of S-scheme photocatalysts via controllable defect engineering is still challenging to now. In this work, multi-armed MoSe2/CdS S-scheme heterojunction with intimate Mo-S bond coupling and adjustable Se vacancies (VSe) and Mo5+ concentrations was constructed, which consisted of few- or even single-layered MoSe2 growing on the {11-20} facets of wurtzite CdS arms. The S-scheme charge transmission mechanism of MoSe2/CdS heterojunction was validated by density functional theory calculation combined with in situ photo-irradiated X-ray photoelectron spectroscopy, surface photovoltage, and radical measurements. Moreover, the Fermi level gap between CdS and MoSe2 was enlarged by regulating the contents of donor (VSe) and acceptor (Mo5+) impurities with synthesis temperature, which strengthens the built-in electric field and carriers transfer driving force of MoSe2/CdS composites, contributing to an outstanding H2 evolution activity of 52.62 mmol·g-1·h-1 (corresponding to an apparent quantum efficiency of 34.8 % at 400 nm) under visible-light irradiation (λ > 400 nm), 25.8 times that of Pt-loaded CdS counterpart and a substantial amount of reported CdS-containing photocatalysts. Our study results are anticipated to facilitate the rational design of advanced semiconductor nanostructures for efficient solar conversion and utilization.

Efficient rhodamine B dye photocatalytic degradation in aqueous media using novel ZnO nanomaterials co-doped with Ce and Dy.

Water pollution caused by dyes and industrial wastewater poses a significant threat to ecosystems. The purification of such pollutants presents a major challenge. Photocatalysis based on semiconductor materials is a potential wastewater treatment process due to its safety and cost-effectiveness. In the present work, Zn1-2xCexDyxO (x = 0.01-0.05) semiconductors were prepared by the sol-gel auto-ignition method. The samples are denoted CDZO1, CDZO3, and CDZO5 for x  = 0.01-0.05, respectively. The X-ray diffraction and Raman spectroscopy results revealed the formation of ZnO hexagonal phase wurtzite structure for all synthesized compositions. Different structural properties were determined. It was found that the lattice parameters and the unit cell volume increased, while the crystallite size diminished as x varied from 0.01 to 0.05. Transmission electron microscopy observations confirmed the formation of nanoparticles with the desired chemical compositions. The specific surface area (SSA) values are found to be 39.95 m2/g, 48.62 m2/g, and 51.36 m2/g for CDZO1, CDZO5, and CDZO5 samples, respectively. The reflectance spectra were recorded to examine the optical properties of the different nanoparticles. The values of the optical band gap were 3.221, 3.225, and 3.239 eV for CDZO1, CDZO3, and CDZO5 samples, respectively. In addition, the photocatalytic performance towards RhB dye degradation for the different samples was assessed. It was established that the CDZO3 sample with a moderate SSA value exhibited the superior photocatalytic performance among the other as-prepared samples wherein the percentage of degradation efficiency, and kinetic constant rate attained their maximum values of 98.22 % and 0.0521 min-1, respectively within 75 min. As per the obtained findings, it is evident that the Zn1-2xCexDyxO photocatalyst has prominent potential for use in the degradation of dyes and offers a useful route for impeding the recombination of electron-hole pairs of zinc oxide material.

A facile green synthesis of manganese oxide nanoparticles using gum karaya polymer as a bioreductant for efficient photocatalytic degradation of organic dyes and antibacterial activity.

The release of organic dyes into water systems, mainly textile industries, poses a significant threat to human and animal health. This approach shows great potential for effectively removing harmful dyes and microorganisms from wastewater treatment for environmental remediation. This study utilized gum karaya polymer bio-reductant to synthesize manganese oxide (MnO2) nanoparticles through a green approach. The synthesized MnO2 nanoparticles were characterized and confirmed by various analytical techniques. These results revealed their nanoscale dimensions, morphology, chemical purity, crystal nature, decolorized intermediate, and band gap. The photocatalytic degradation of hazardous Congo red and methyl orange dyes using KRG-MnO2 nanoparticles under visible light irradiation. Furthermore, the results demonstrated that Congo red dye degradation efficiency of 93.34 % was achieved. The dye concentration (8 to 16 mg/L), pH concentration, and radical trapping were studied. This suggests that holes and hydroxyl radicals play a crucial role in degrading the Congo red dye and demonstrate superior recyclability after three successive cycles and good stability. The possible intermediates from the Congo red dye degradation were identified through LC-MS analysis. The polymer composite MnO2 NPs have displayed notable antibacterial activity against pathogenic bacteria such as Staphylococcus aureus and Escherichia coli. The research indicates that MnO2 nanoparticles functionalized with polymers can efficiently remove pathogens and organic dyes from diverse industrial water treatment processes.

Metal-free adsorption and photodegradation methods for methylene blue dye removal using different reduction grades of graphene oxide.

The release of organic pollutants and dyes into the environment by industries has had profound and harmful effects on both humans and ecosystems. Graphene oxide (GO) and its reduced form have been investigated for their effectiveness in removing pollutant dyes. GO nano-powder was synthesized using an improved version of Hummer's method and subsequently thermally reduced at various temperatures, including 125, 150, 175, and 200 °C, under vacuum conditions. In the X-ray diffraction spectra, an intense (001) diffraction peak was initially observed at 9.136° (2θ) for pristine GO. This peak gradually shifted towards higher angles as the reduction process took place and eventually disappeared when the GO was reduced at 200 °C. The intensity ratio of the D and G bands (ID/IG ratio) for GO nano-powder in the Raman spectra decreased from 0.94 to 0.76 due to the reduction process. The FTIR spectra of GO and reduced graphene oxide (rGO) also illustrated the reduction process. The bandgap of pristine GO significantly decreased from 2.31 to 0.73 eV, as determined by ultraviolet-visible (UV-Vis) diffuse reflectance spectrophotometry during the reduction process. The surface area and pore volume of both pristine GO and rGO-150 were determined using the BET (Brunauer-Emmett-Teller) and BJH (Barrett-Joyner-Halenda) methods. The results indicated an increase in the BET surface area from 6.61 to 7.86 m2/g and a corresponding enhancement in pore volume from 0.118 to 0.128 cc/g after reduction. The adsorption and photocatalytic degradation behavior of pristine GO and reduced graphene oxides (rGOs) were examined using methylene blue dye. The pristine GO demonstrated impressive adsorption capability, effectively removing the dye by 85.78 % within just 15 min and achieving nearly 97 % removal after 4 h. In contrast, the highest photocatalytic degradation of methylene blue, about 47.58 %, was attained for the rGO sample reduced at 150 °C under the illumination of visible light.

Preparation of thiourea derivative incorporated Ag3PO4 core shell for enhancement of photocatalytic degradation performance of organic dye under visible radiation light.

Photocatalysis is a promising technique to reduce hazardous organic pollutants using semiconductors under visible light. However, previous studies have been concerned with the behavior of silver phosphate (Ag3PO4) as n-type semiconductors, and the problem of their instability is still under investigation. Herein, 4,4'-(((oxalylbis(azanediyl)) bis(carbonothioyl)) bis(azanediyl)) dibenzoic acid is synthesized by green method and used to enhance the photocatalytic behavior for Ag3PO4. The incorporated Ag3PO4 core-shell is prepared and characterized via XRD, FT-IR, Raman, TEM and BET. Besides, the thermal stability of the prepared core shell was investigated via TGA and DSC measurements. The optical properties and the energy band gap are determined using photoluminescence and DRS measurements. The photodegradation of methylene blue in the presence of the synthesized Ag3PO4 core-shell under visible light is examined using UV/Vis measurements. The effect of initial dye concentration and contact time are studied. In addition, the kinetic behavior of the selected dye during the photodegradation process shows a pseudo-first order reaction with rate constant of 0.015 min-1 for ZAg. The reusability of the Ag3PO4 core shell is evaluated, and the efficiency changed from 96.76 to 94.02% after three cycles, indicating efficient photocatalytic behavior with excellent stability.

Synthesis and full-spectrum-responsive photocatalytic activity from UV/Vis to near-infrared region of S-O decorated YMnO3 nanoparticles for photocatalytic degradation of ibuprofen.

The oxalic acid complexation method and sulfuric acid heat treatment method were used to synthesize the YMnO3 (YMO) and YMO-SO4 2- (YMO-SO) photocatalysts. The YMO-SO photocatalyst maintained the crystal structure of YMO, but the particle size increased slightly and the optical band gap decreased significantly. The YMO-SO photocatalyst demonstrates a wide range of light absorption capabilities, covering ultraviolet, visible and near-infrared light. The photocatalytic activity of YMO-SO was investigated with ibuprofen as the target pollutant. The YMO-SO photocatalyst exhibits high ultraviolet (UV), visible and near-infrared photocatalytic activity. Experiments with different environmental parameters confirmed that the best catalyst content was 1 g/L, the best drug concentration was 75 mg/L and the best pH value was 7. The capture experiment, free radical detection experiment and photocatalytic mechanism analysis confirmed that the main active species of YMO-SO photocatalyst were hole and superoxide free radical.

Silver-Doped Titanium Oxide Layers for Improved Photocatalytic Activity and Antibacterial Properties of Titanium Implants.

Titanium has a long history of clinical use, but the naturally forming oxide is not ideal for bacterial resistance. Anodization processes can modify the crystallinity, surface topography, and surface chemistry of titanium oxides. Anatase, rutile, and mixed phase oxides are known to exhibit photocatalytic activity (PCA)-driven bacterial resistance under UVA irradiation. Silver additions are reported to enhance PCA and reduce bacterial attachment. This study investigated the effects of silver-doping additions to three established anodization processes. Silver doping showed no significant influence on oxide crystallinity, surface topography, or surface wettability. Oxides from a sulfuric acid anodization process exhibited significantly enhanced PCA after silver doping, but silver-doped oxides produced from phosphoric-acid-containing electrolytes did not. Staphylococcus aureus attachment was also assessed under dark and UVA-irradiated conditions on each oxide. Each oxide exhibited a photocatalytic antimicrobial effect as indicated by significantly decreased bacterial attachment under UVA irradiation compared to dark conditions. However, only the phosphorus-doped mixed anatase and rutile phase oxide exhibited an additional significant reduction in bacteria attachment under UVA irradiation as a result of silver doping. The antimicrobial success of this oxide was attributed to the combination of the mixed phase oxide and higher silver-doping uptake levels.

Liquid Phase Exfoliation of Few-Layer Non-Van der Waals Chromium Sulfide.

Exfoliation of 2D non-Van der Waals (non-vdW) semiconductor nanoplates (NPs) from inorganic analogs presents many challenges ahead for further exploring of their advanced applications on account of the strong bonding energies. In this study, the exfoliation of ultrathin 2D non-vdW chromium sulfide (2D Cr2S3) by means of a combined facile liquid-phase exfoliation (LPE) method is successfully demonstrated. The morphology and structure of the 2D Cr2S3 material are systematically examined. Magnetic studies show an obvious temperature-dependent uncompensated antiferromagnetic behavior of 2D Cr2S3. The material is further loaded on TiO2 nanorod arrays to form an S-scheme heterojunction. Experimental measurements and density functional theory (DFT) calculations confirm that the formed TiO2@Cr2S3 S-scheme heterojunction facilitates the separation and transmission of photo-induced electron/hole pairs, resulting in a significantly enhanced photocatalytic activity in the visible region.

A Comparative Study of Cerium(III) and Cerium(IV) Phosphates for Sunscreens.

Crystalline cerium(III) phosphate (CePO4), cerium(IV) phosphates, and nanocrystalline ceria are considered to be promising components of sunscreen cosmetics. This paper reports on a study in which, for the first time, a quantitative comparative analysis was performed of the UV-shielding properties of CePO4, Ce(PO4)(HPO4)0.5(H2O)0.5, and CePO4/CeO2 composites. Both the sun protection factor and protection factor against UV-A radiation of the materials were determined. Ce(PO4)(HPO4)0.5(H2O)0.5 was shown to have a sun protection factor of 2.9, which is comparable with that of nanocrystalline ceria and three times higher than the sun protection factor of CePO4. Composites containing both cerium dioxide and CePO4 demonstrated higher sun protection factors (up to 1.8) than individual CePO4. When compared with the TiO2 Aeroxide P25 reference sample, cerium(III) and cerium(IV) phosphates demonstrated negligible photocatalytic activity. A cytotoxicity analysis performed using two mammalian cell lines, hMSc and NCTC L929, showed that CePO4, Ce(PO4)(HPO4)0.5(H2O)0.5, and nanocrystalline ceria were all non-toxic. The results of this comparative study indicate that cerium(IV) phosphate Ce(PO4)(HPO4)0.5(H2O)0.5 is more advantageous for use in sunscreens than either cerium(III) phosphate or CePO4/CeO2 composites, due to its improved UV-shielding properties and low photocatalytic activity.