Efficiency of metal(loid) phytostabilization by white lupin (Lupinus albus L.), common vetch (Vicia sativa L.), and buckwheat (Fagopyrum esculentum Moench).

Erosion and leaching of metal(loid)s from contaminated sites can spread pollution to adjacent ecosystems and be a source of toxicity for living organisms. Phytostabilization consists of selecting plant species accumulating little or no metal(loid)s in aerial parts to establish a vegetation cover and thus to stabilize the contaminants in the soil. Seeds of white lupin, common vetch, and buckwheat were sown in greenhouse on soils from former French mines (Pontgibaud and Vaulry) contaminated with metal(loid)s including high concentrations of As and Pb (772 to 1064 and 121 to 12,340 mg kg-1, respectively). After 3 weeks of exposure, the growth of white lupin was less affected than that of the 2 other species probably because metal(loid) concentrations in roots and aerial parts of lupins were lower (5-20 times less Pb in lupin leaves on Pontgibaud soil and 5-10 times less As in lupin leaves on Vaulry soil than in vetch and buckwheat). To limit oxidation and/or scavenge metal(loid)s, white lupin increased the content of proline and total phenolic compounds (TPC) in leaves and roots by a factor 2 whereas buckwheat stimulated the production of TPC by a factor 1.5-2, and non-protein thiols (NPT) by factors around 1.75 in leaves and 6-12 in roots. Vetch accumulated more proline than white lupin but less NPT than buckwheat and less TPC than the 2 other plant species. The level of oxidation was however higher than in control plants for the 3 species indicating that defense mechanisms were not completely effective. Overall, our results showed that white lupin was the best species for phytostabilization but amendments should be tested to improve its tolerance to metal(loid)s.

Development of simplified probabilistic models for predicting phytoextraction timeframes of soil contaminants: demonstration at the DDX-contaminated Kolleberga tree nursery in Sweden.

Phytoextraction, utilizing plants to remove soil contaminants, is a promising approach for environmental remediation but its application is often limited due to the long time requirements. This study aims to develop simplified and user-friendly probabilistic models to estimate the time required for phytoextraction of contaminants while considering uncertainties. More specifically we: i) developed probabilistic models for time estimation, ii) applied these models using site-specific data from a field experiment testing pumpkin (Cucurbita pepo ssp. pepo cv. Howden) for phytoextraction of DDT and its metabolites (ΣDDX), iii) compared timeframes derived from site-specific data with literature-derived estimates, and iv) investigated model sensitivity and uncertainties through various modelling scenarios. The models indicate that phytoextraction with pumpkin to reduce the initial total concentration of ΣDDX in the soil (10 mg/kg dw) to acceptable levels (1 mg/kg dw) at the test site is infeasible within a reasonable timeframe, with time estimates ranging from 48-123 years based on literature data or 3 570-9 120 years with site-specific data using the linear or first-order exponential model, respectively. Our results suggest that phytoextraction may only be feasible at lower initial ΣDDX concentrations (< 5 mg/kg dw) for soil polishing and that alternative phytomanagement strategies should be considered for this test site to manage the bioavailable fraction of DDX in the soil. The simplified modes presented can be useful tools in the communication with site owners and stakeholders about time approximations for planning phytoextraction interventions, thereby improving the decision basis for phytomanagement of contaminated sites.

Dieldrin accumulation, distribution in plant parts and phytoextraction potential for several plant species and Cucurbita pepo varieties.

Dieldrin, an organochlorine pesticide (OCP) widely used for crop protection in the second half of the 20th century till the 70's, is worldwide still present in arable soils. It can be transferred to crops, notably cucurbits, depending on plant species and cultivars. Finding strategies to decrease OCP bioavailability in soil is therefore a main concern. Phytomanagement strategies could provide (i) ready-to-use short term solution for maintaining the production of edible plant parts with dieldrin concentrations below the Maximum Residue Limits (MRL) and (ii) long-term solution for dieldrin phytoextraction reducing progressively its bioavailability in the soil. This field study aimed at determining dieldrin accumulation capacities and allocation pattern in 17 non-Cucurbitaceae species and 10 Cucurbita pepo varieties, and assessing the dieldrin phytoextraction potential of these plant species when grown to maturity in a historically dieldrin-contaminated soil. Out of the non-Cucurbitaceae species, vetiver was the only one able to accumulate significant amounts of dieldrin, which mainly remained in its roots. All C. pepo varieties were able to uptake and translocate high dieldrin amounts into the shoots, leading to the highest phytoextraction potential. Despite the intraspecific variability in dieldrin concentration in zucchini plant parts, mainly in the reproductive organs, the phytoextraction capacity for shoots and fruits was high for all tested varieties (147 to 275 µg dieldrin plant-1, corresponding to 5.6 % of the n-heptane extractable soil dieldrin), even for the one with low fruit dieldrin concentration. Both food safety and phytoextraction could be achieved by selecting productive zucchini varieties displaying low dieldrin concentration in fruits and high one in shoots.

Maintaining the cultivation of vegetables with low Pb accumulation while remediating the soil of an allotment garden (Nantes, France) by phytoextraction.

Lead (Pb) is commonly found in urban soils and can transfer to vegetables. This entails a health risk for consumers of garden crops. The increasing demand of gardening on urban soil linked to the population increase and concentration in urban areas induces an increase in the risk, as people could be forced to cultivate contaminated soils. The aim of this study was to evaluate the performance of a cropping system that allows simultaneously (i) growing eatable vegetables that accumulate few Pb and (ii) cleaning up the soil with other plants by phytoextraction. The tests were carried out in an allotment garden (Nantes, France) where soils are moderately enriched by Pb from geogenic origin (178 mg.kg-1 of dry soil on average). Four vegetables known to accumulate slightly Pb (Solanum lycopersicum, Brassica oleracea cv. "Capitata," Solanum tuberosum, and Phaseolus vulgaris) were grown. The in situ ability of Brassica juncea L. to progressively absorb the phytoavailable Pb of the soil was assessed during four seasons. Analyses of the edible parts of the four vegetables confirmed that they can all be safely cultivated. The accumulation of Pb in B. juncea shoots was too low (ca. 1 mg.kg-1 of dry matter at best) for phytoextraction purposes. Our results confirm that it is possible to grow very low Pb-accumulating vegetables on soils moderately contaminated with Pb, although it was not possible to reduce phytoavailable Pb rapidly enough with B. juncea. This study identifies possible avenues of research to improve this cropping system by using appropriate vegetables that will allow food production to continue on moderately contaminated soil while cleaning it up.

Phytomanagement of trace element polluted fields with aromatic plants: supporting circular bio-economies.

Trace elements pollution of soils became a global concern because of their persistence in the environment which can lead to accumulation in food chains up to toxic levels. At the same time, there is a shortage of arable land for growing food, fodder and industrial crops, which highlights the need for remediation/use of polluted land. Restoration of degraded lands has been included as a vital component of UN Sustainable Development Goals (SDGs). We summarize various sources of entry of important trace elements in the environment, available biological reclamation and management strategies and their limitations. Recent advances in phytomanagement approaches using aromatic crops to obtain economically valuable products such as essential oils and revalorize such polluted areas are reviewed. The worldwide application of this strategy in the last 10 years is illustrated through a choropleth map. Finally, the emerging concept of phytomanagement as a restorative and regenerative circular bio-economy is also discussed.

Phytomanagement studies have remarkably increased during the last 4 years. However, there were limited studies on field application of this strategy. France is the leading country in phytomanaged polluted fields using aromatic plants. Applying aromatic plants based degraded land management models are a sustainable approach toward circular economy and to achieve the objectives of sustainable development goals (SDGs).

Differential effects of tree species identity on rhizospheric bacterial and fungal community richness and composition across multiple trace element-contaminated sites.

Soil microbial communities play a key role in plant nutrition and stress tolerance. This is particularly true in sites contaminated by trace metals, which often have low fertility and stressful conditions for woody plants in particular. However, we have limited knowledge of the abiotic and biotic factors affecting the richness and composition of microbial communities inhabiting the rhizosphere of plants in contaminated sites. Using high-throughput amplicon sequencing, we studied the rhizospheric bacterial and fungal community structures of 14 woody plant families planted in three contrasting sites contaminated by metals (Pb, Cd, Zn, Mn, Fe, S). The rhizospheric bacterial communities in the given sites showed no significant difference between the various woody species but did differ significantly between sites. The Proteobacteria phylum was dominant, accounting for over 25 % of the overall relative abundance, followed by Actinobacteria, Bacteroidetes and Gemmatimonadetes. Site was also the main driver of fungal community composition, yet unlike bacteria, tree species identity significantly affected fungal communities. The Betulaceae, Salicaceae and Fagaceae families had a high proportion of Basidiomycota, particularly ectomycorrhizal fungi, and the lowest diversity and richness. The other tree families and the unplanted soil harboured a greater abundance of Ascomycota and Mucoromycota. Consequently, for both bacteria and fungi, the site effect significantly impacted their community richness and composition, while the influence of plants on the richness and composition of rhizospheric microbial communities stayed consistent across sites and was dependent on the microbial kingdom. Finally, we highlighted the importance of considering this contrasting response of plant rhizospheric microbial communities in relation to their host identity, particularly to improve assisted revegetation efforts at contaminated sites.

Potential of herbaceous plant species for copper (Cu) accumulation.

The removal of copper (Cu) in soils by green technology is less treated with urgency, as it is a plant micronutrient. We examined the efficiency of Cu shoot accumulation by herbaceous plants in Cu-contaminated and non-contaminated soils in Trhové Dusniky and Podles, respectively, in the Czech Republic. The total soil Cu content of 81 mg kg-1 in Trhové Dusniky indicated a slight contamination level compared to 50 mg kg-1, the permissible value by WHO, and < 35 in Podlesí, representing a clean environment. The Cu content was above the permissible value in plants (10 mg kg-1 by WHO) in herbaceous speciesat the control site without trees: Stachys palustris L. (10.8 mg kg-1), Cirsium arvense L. (11.3 mg kg-1), Achillea millefolium L. (12.1 mg kg-1), Anthemis arvense L. (13.2 mg kg-1), and Calamagrostis epigejos L. (13.7 mg kg-1). In addition, Hypericum maculatum Crantz (10.6 mg kg-1), Campanula patula L. (11.3 mg kg-1), C. arvense (15 mg kg-1), and the highest accumulation in shoot of Equisetum arvense L. (37.1 mg kg-1), all under the canopy of trees at the uncontaminated site, were above the WHO value. Leucanthemum Vulgare (Lam.) and Plantago lanceolata L. recorded 11.2 mg kg-1 and 11.5 mg kg-1, respectively, in the soil of the Cu-contaminated site. These herbaceous species can support the phyto-management of Cu-contaminated soils, especially E. arvense. Critical attention is well-required in the medicinal application of herbaceous plants in treating human ailments due to their Cu accumulation potentials above the threshold. Spontaneous surveys and analysis of Cu speciation in herbaceous species can reveal suitable plants to decontaminate soils and provide caution on consumable products, especially bioactive compounds.

Drivers to improve metal(loid) phytoextraction with a focus on microbial degradation of dissolved organic matter in soils.

Bioaugmentation of soils can increase the mobilization of metal(loid)s from the soil-bearing phases. However, once desorbed, these metal(loid)s are mostly complexed to the dissolved organic matter (DOM) in the soil solution, which can restrict their availability to plants (roots mainly taking up the free forms) and then the phytoextraction performances. Firstly the main drivers influencing phytoextraction are reminded, then the review focuses on the DOM role. After having reminding the origin, the chemical structure and the lability of DOM, the pool of stable DOM (the most abundant in the soil) most involved in the complexation of metal(loid)s is addressed in particular by focusing on carboxylic and/or phenolic groups and factors controlling metal(loid) complexation with DOM. Finally, this review addresses the ability of microorganisms to degrade metal(loid)-DOM complexes as an additional lever for increasing the pool of free metal(loid) ions, and then phytoextraction performances, and details the origin of microorganisms and how they are selected. The development of innovative processes including the use of these DOM-degrading microorganisms is proposed in perspectives.

This review focuses on the available drivers to increase the pool of free (i.e. phytoavailable) metal(loid)s in the soil solution, with a specific focus on the ability of microorganisms to degrade dissolved organic matter for enriching this pool, and then to substantially improve phytoextraction performance.

The Uptake of Rare Trace Elements by Perennial Ryegrass (Lolium perenne L.).

Technological development has increased the use of chemical elements that have hitherto received scant scientific attention as environmental contaminants. Successful management of these rare trace elements (RTEs) requires elucidation of their mobility in the soil-plant system. We aimed to determine the capacity of Lolium perenne (a common pasture species) to tolerate and accumulate the RTEs Be, Ga, In, La, Ce, Nd, and Gd in a fluvial recent soil. Cadmium was used as a reference as a well-studied contaminant that is relatively mobile in the soil-plant system. Soil was spiked with 2.5-283 mg kg-1 of RTE or Cd salts, representing five, 10, 20, and 40 times their background concentrations in soil. For Be, Ce, In, and La, there was no growth reduction, even at the highest soil concentrations (76, 1132, 10.2, and 874 mg kg-1, respectively), which resulted in foliar concentrations of 7.1, 12, 0.11, and 50 mg kg-1, respectively. The maximum no-biomass reduction foliar concentrations for Cd, Gd, Nd, and Ga were 0.061, 0.1, 7.1, and 11 mg kg-1, respectively. Bioaccumulation coefficients ranged from 0.0030-0.95, and increased Ce < In < Nd ≅ Gd < La ≅ Be ≅ Ga < Cd. Beryllium and La were the RTEs most at risk of entering the food chain via L. perenne, as their toxicity thresholds were not reached in the ranges tested, and the bioaccumulation coefficient (plant/soil concentration quotient) trends indicated that uptake would continue to increase at higher soil concentrations. In contrast, In and Ce were the elements least likely to enter the food chain. Further research should repeat the experiments in different soil types or with different plant species to test the robustness of the findings.

Techno-economic analysis of phytoremediation: A strategic rethinking.

Phytoremediation is a cost-effective and environmentally sound approach, which uses plants to immobilize/stabilize, extract, decay, or lessen toxicity and contaminants. Despite successful evidence of field application, such as natural attenuations, and self-purification, the main barriers remain from a "promising" to a "commercial" approach. Therefore, the ultimate goal of this paper is to examine factors that contribute to phytoremediation's underutilization and discuss the real costs of phytoremediation when the time and land values are considered. We revisit mechanisms and processes of phytoremediation. We synthesize existing information and understanding based on previous works done on phytoremediation and its applications to provide the technical assessment and perspective views in the commercial acceptance of phytoremediation. The results show that phytoremediation is the most suitable for remote regions with low land values. Since these regions allow a longer period to be restored, land vegetation covers can be established in more or less time like natural attenuation. Since the length of phytoremediation is an inherent limitation, this inherent disadvantage limits its adoption in developed business regions, such as growing urban areas. Because high land values could not be recovered in the short term, phytoremediation is not cost-effective in those regions. We examine the potential measures that can enhance the performance of phytoremediation, such as soil amendments, and agricultural practices. The results obtained through review can clarify where/what conditions phytoremediation can provide the most suitable solutions at a large scale. Finally, we identify the main barriers and knowledge gaps to establishing a vegetation cover in large-scale applications and highlight the research priorities for increased acceptance of phytoremediation.

Floristic survey, trace element transfers between soil and vegetation and human health risk at an urban industrial wasteland.

This study aimed to determine the trace element accumulation in the soil and plants in an industrial wasteland and to estimate the extent of transfer to humans to measure the effects on and risks to vegetation and human health and find bioindicator plants representative of the levels of the main contaminants. In areas with the highest extractable trace element levels, we observed decreases in plant biodiversity explained by the disappearance of several families, favouring the coverage of tolerant species, such as Urtica dioica and Hedera helix. Trace elements were also found in the leaves of several plants, especially in a dominant species that is poorly studied, Alliaria petiolata. Indeed, this species had the highest contents of Zn (1750 mg.kg-1 DW), Ni (13.1 mg.kg-1 DW), and Cd (18 mg.kg-1 DW) found at the site and is a potential Zn bioindicator since its leaf contents were also representative of the Zn extractable contents in soil (R² = 0.94). The hazard quotient and carcinogen risk revealed that most of the site had an identified or possible risk, mainly due to Pb and As. Native species, especially A. petiolata, could be used in phytoextraction to manage and limit these human and environmental risks.

Pleiotropic melatonin-mediated responses on growth and cadmium phytoextraction of Brassica napus: A bioecological trial for enhancing phytoremediation of soil cadmium.

Melatonin (MT) has recently gained significant scientific interest, though its mechanism of action in enhancing plant vigor, cadmium (Cd) tolerance, and Cd phytoremediation processes are poorly understood. Therefore, here we investigated the beneficial role of MT in improving growth and Cd remediation potential of rapeseed (Brassica napus). Plants, with or without MT (200 µM L-1), were subjected to Cd stress (30 mg kg1). Without MT, higher Cd accumulation (up to 99%) negatively affected plant growth and developmental feature as well as altered expression of several key genes (DEGs) involved in different molecular pathways of B. napus. As compared to only Cd-stressed counterparts, MT-treated plants exhibited better physiological performance as indicated by improved leaf photosynthetic and gaseous exchange processes (3-48%) followed by plant growth (up to 50%), fresh plant biomass (up to 45%), dry plant biomass (up to 32%), and growth tolerance indices (up to 50%) under Cd exposure. MT application enhanced Cd tolerance and phytoremediation capacity of B. napus by augmenting (1) Cd accumulation in plant tissues and its translocation to above-ground parts (by up to 45.0%), (2) Cd distribution in the leaf cell wall (by up to 42%), and (3) Cd detoxification by elevating phytochelatins (by up to 8%) and metallothioneins (by upto 14%) biosynthesis, in comparison to Cd-treated plants. MT played a protective role in stabilizing hydrogen peroxide and malondialdehyde levels in the tissue of the Cd-treated plants by enhancing the content of osmolytes (proline and total soluble protein) and activities of antioxidant enzymes (SOD, CAT, APX and GR). Transcriptomic analysis revealed that MT regulated 1809 differentially expressed genes (828 up and 981 down) together with 297 commonly expressed DEGs (CK vs Cd and Cd vs CdMT groups) involved in plant-pathogen interaction pathway, protein processing in the endoplasmic reticulum pathway, mitogen-activated protein kinase signaling pathway, and plant hormone signal transduction pathway which ultimately promoted plant growth and Cd remediation potential in the Cd-stressed plants. These results provide insights into the unexplored pleiotropic beneficial action of MT in enhancing in the growth and Cd phytoextraction potential of B. napus, paving the way for developing Cd-tolerant oilseed crops with higher remediation capacity as a bioecological trial for enhancing phytoremediation of hazardous toxic metals in the environment.

Cover crop response to increased concentrations of copper in vineyard soils: Implications for copper phytoextraction.

The use of cover crops (CCs) in viticulture is threatened by the contamination of vineyard soils by copper (Cu). This study investigated the response of CCs to increased concentrations of Cu in soil as a way to assess their sensitivity to Cu and their Cu phytoextraction ability. Our first experiment used microplots to compare the effect of increasing soil Cu content from 90 to 204 mg kg-1 on the growth, Cu accumulation level, and elemental profile of six CC species (Brassicaceae, Fabaceae and Poaceae) commonly sown in vineyard inter-row. The second experiment quantified the amount of Cu exported by a mixture of CCs in vineyards with contrasted soil characteristics. Experiment 1 showed that increasing the soil Cu content from 90 to 204 mg kg-1 was detrimental to the growth of Brassicaceae and faba bean. The elemental composition of plant tissues was specific to each CC and almost no change in composition resulted from the increase in soil Cu content. Crimson clover was the most promising CC for Cu phytoextraction as it produced the most aboveground biomass, and, along with faba bean, accumulated the highest concentration of Cu in its shoots. Experiment 2 showed that the amount of Cu extracted by CCs depended on the availability of Cu in the topsoil and CC growth in the vineyard, and ranged from 25 to 166 g per hectare. Taken together, these results emphasize the fact that the use of CCs in vineyards may be jeopardised by the contamination of soils by Cu, and that the amount of Cu exported by CCs is not sufficiently high to offset the amount of Cu supplied by Cu-based fungicides. Recommendations are provided for maximizing the environmental benefits provided by CCs in Cu-contaminated vineyard soils.

Coriander (Coriandrum sativum) Cultivation Combined with Arbuscular Mycorrhizal Fungi Inoculation and Steel Slag Application Influences Trace Elements-Polluted Soil Bacterial Functioning.

The cultivation of aromatic plants for the extraction of essential oils has been presented as an innovative and economically viable alternative for the remediation of areas polluted with trace elements (TE). Therefore, this study focuses on the contribution of the cultivation of coriander and the use of arbuscular mycorrhizal fungi (AMF) in combination with mineral amendments (steel slag) on the bacterial function of the rhizosphere, an aspect that is currently poorly understood and studied. The introduction of soil amendments, such as steel slag or mycorrhizal inoculum, had no significant effect on coriander growth. However, steel slag changed the structure of the bacterial community in the rhizosphere without affecting microbial function. In fact, Actinobacteria were significantly less abundant under slag-amended conditions, while the relative proportion of Gemmatimonadota increased. On the other hand, the planting of coriander affects the bacterial community structure and significantly increased the bacterial functional richness of the amended soil. Overall, these results show that planting coriander most affected the structure and functioning of bacterial communities in the TE-polluted soils and reversed the effects of mineral amendments on rhizosphere bacterial communities and their activities. This study highlights the potential of coriander, especially in combination with steel slag, for phytomanagement of TE-polluted soils, by improving soil quality and health.

Trace Element Uptake by Willows Used for the Phytoremediation of Biosolids.

The land application of biosolids can result in the unacceptable accumulation of Trace Elements (TEs) in agricultural soil and potentially introduce xenobiotics and pathogens into the food chain. Phytoremediation of biosolids aims to minimize this risk, while producing valuable biomass. Willows, well known to accumulate zinc (Zn), are used extensively in farming systems for soil conservation, shelter and as feed supplements with demonstrable health benefits. Potentially, biosolids phytoremediation could occur on marginal lands adjacent to farmlands where willows are grown for supplementary fodder. We aimed to determine the uptake and distribution of Zn and other TEs in willows grown on soils amended with biosolids and biosolids blended with biochar, with a view to their use as stock fodder. In the Canterbury Region, New Zealand, we grew Salix 'tangaio' (S. matsudana X S. alba) in a greenhouse trial and field study. The biomass production of the willows was unaffected by biosolids and increased by the biosolids+biochar mixture. The addition of 4% biosolids (w/w) to the soil resulted in a foliar Zn concentration of 600-1000 mg kg-1, some 25 times higher than the average New Zealand pasture. Zinc concentrations were highest in the bottom leaves and increased throughout the season. Biosolids addition doubled the copper (Cu) concentration to 10 mg kg-1. Adding biochar to the system reduced the plant uptake of Cu and to a lesser extent Zn, while cadmium (Cd) uptake was unaffected. For Cd, Cu, and Zn, plant uptake was a function of the Ca(NO3)2-extractable concentration, both in greenhouse experiments and the field trial. Future work should determine the changes in plant TE uptake over several growing seasons.

Phytomanagement of a Lead-Polluted Shooting Range Using an Aromatic Plant Species and Its Effects on the Rhizosphere Bacterial Diversity and Essential Oil Production.

This field study aimed to assess the baseline conditions of a long-term shooting range in Argentina polluted with 428 mg kg-1 lead (Pb) to evaluate the establishment and development of Helianthus petiolaris plants and address the efficacy of the phytomanagement strategy through: (i) element accumulation in plant tissues; (ii) rhizosphere bacterial diversity changes by Illumina Miseq™, and (iii) floral water and essential oil yield, composition, and element concentration by GC-MS and ICP. After one life cycle growing in the polluted sites, in the roots of Helianthus petiolaris plants, Pb concentration was between 195 and 304 mg kg-1 Pb. Only a limited fraction of the Pb was translocated to the aerial parts. The predominance of the genus Serratia in the rhizosphere of Helianthus petiolaris plants cultivated in the polluted sites and the decrease in the essential oil yield were some effects significantly associated with soil Pb concentration. No detectable Pb concentration was found in the floral water and essential oil obtained. Extractable Pb concentration in the soil reduced between 28% and 45% after the harvest.

Mycorrhizal inoculation effects on growth and the mycobiome of poplar on two phytomanaged sites after 7-year-short rotation coppicing.

Aims: Afforestation of trace-element contaminated soils, notably with fast growing trees, has been demonstrated to be an attractive option for bioremediation due to the lower costs and dispersion of contaminants than conventional cleanup methods. Mycorrhizal fungi form symbiotic associations with plants, contributing to their tolerance towards toxic elements and actively participating to the biorestoration processes. The aim of this study was to deepen our understanding on the effects of mycorrhizal inoculation on plant development and fungal community at two trace-element contaminated sites (Pierrelaye and Fresnes-sur-Escaut, France) planted with poplar (Populus trichocarpa x Populus maximowiczii). Methods: The 2 sites were divided into 4 replicated field blocks with a final plant density of 2200 tree h-1. Half of the trees were inoculated with a commercial inoculum made of a mix of mycorrhizal species. The sites presented different physico-chemical characteristics (e.g., texture: sandy soil versus silty-loam soil and organic matter: 5.7% versus 3.4% for Pierrelaye and Fresnes-sur-Escaut, respectively) and various trace element contamination levels. Results: After 7 years of plantation, inoculation showed a significant positive effect on poplar biomass production at the two sites. Fungal composition study demonstrated a predominance of the phylum Ascomycota at both sites, with a dominance of Geopora Arenicola and Mortierella elongata, and a higher proportion of ectomycorrhizal and endophytic fungi (with the highest values observed in Fresnes-sur-Escaut: 45% and 28% for ECM and endophytic fungi, respectively), well known for their capacity to have positive effects on plant development in stressful conditions. Furthermore, Pierrelaye site showed higher frequency (%) of mycorrhizal tips for ectomycorrhizal fungi (ECM) and higher intensity (%) of mycorrhizal root cortex colonization for arbuscular mycorrhizal fungi (AMF) than Fresnes-sur-Escaut site, which translates in a higher level of diversity. Conclusions: Finally, this study demonstrated that this biofertilization approach could be recommended as an appropriate phytomanagement strategy, due to its capacity to significantly improve poplar productivity without any perturbations in soil mycobiomes.

Nettle, a Long-Known Fiber Plant with New Perspectives.

The stinging nettle Urticadioica L. is a perennial crop with low fertilizer and pesticide requirements, well adapted to a wide range of environmental conditions. It has been successfully grown in most European climatic zones while also promoting local flora and fauna diversity. The cultivation of nettle could help meet the strong increase in demand for raw materials based on plant fibers as a substitute for artificial fibers in sectors as diverse as the textile and automotive industries. In the present review, we present a historical perspective of selection, harvest, and fiber processing features where the state of the art of nettle varietal selection is detailed. A synthesis of the general knowledge about its biology, adaptability, and genetics constituents, highlighting gaps in our current knowledge on interactions with other organisms, is provided. We further addressed cultivation and processing features, putting a special emphasis on harvesting systems and fiber extraction processes to improve fiber yield and quality. Various uses in industrial processes and notably for the restoration of marginal lands and avenues of future research on this high-value multi-use plant for the global fiber market are described.

Mechanochemistry and Eco-Bases for Sustainable Michael Addition Reactions.

The Michael addition reaction was revisited with a full focus on sustainability combined with efficiency, using mechanochemistry in mild conditions. First, the synthesis of cyclopentenone derivatives was chosen as a model reaction to find optimal conditions in mechanochemistry while using classical but weak bases. The reaction was efficient (84-95% yields), fast (2-6 h), solvent free, and required 0.1 equivalent of base. Aiming to reach greener conditions, classical bases were then replaced using new bio-sourced bases, called Eco-bases, that were easily prepared from plants and led to heterogeneous catalysts. The composition and structure of Eco-bases were characterized by MP-AES, XRPD, EBSD/EDS, HRTEM/EDX and ion chromatography. Interestingly, a high ratio of potassium was observed with the presence of K2Ca(CO3)2 for the most effective Eco-base. The new Eco-bases were used for the mechanical-assisted construction of functionalized alkenone derivatives. The versatility of the method has been successfully applied with good to excellent yields to different Michael donors and acceptors. Eco-bases were recycled and reused four times with the same performances. Combining Eco-bases and mechanochemistry in Michael addition reactions allowed reaching a maximum degree of sustainability (efficient, rapid, low catalyst loading, solvent-free reactions with bio-sourced catalysts) and participating in the development of mechanochemistry in sustainable chemistry.

Assessment for combined phytoremediation and biomass production on a moderately contaminated soil.

Once previous industrial activity has ceased, brownfields are found in urban and suburban environments and managed in different ways ranging from being left untouched to total reconversion. These situations apply to large surface areas often impacted by residual diffuse pollution. Though significant and preventing any sensitive use, residual contamination does not necessarily require treatment. Moreover, conventional treatments show their technical and economic limits in these situations and gentle remediation options such as phytomanagement might appear more relevant to the management of those sites. Thus, these sites face up two major issues: managing moderate contamination levels and providing an alternative use of economic interest. This work proposes to assess a management strategy associating the phytoremediation of organic pollution along with the production of biomass for energy generation production. A 16-week controlled growth experiment was conducted on a soil substrate moderately impacted by multiple pollution (trace elements, mainly Zn and Pb, and hydrocarbons), by associating rhizodegradation with Medicago sativa or biomass production with Robinia pseudoacacia or Alnus incana in monocultures. The effect of a microbial inoculum amendment on the performances of these treatments was also evaluated. Results showed total hydrocarbons (TH), and to a lesser extent polycyclic aromatic hydrocarbons (PAH), concentrations decreased over time, whatever the plant cover. Good biomass production yields were achieved for both tree species in comparison with the control sample, even though R. pseudoacacia seemed to perform better. Furthermore, the quality of the biomass produced was in conformity with the thresholds set by the legislation concerning its use as a renewable energy source.