Fused Hexabenzocoronene-Porphyrin Conjugates with Tailorable Excited-State Lifetimes.

A new clear-cut strategy for fusing N-heterocyclic and carbon-pure systems is introduced en route to a versatile platform of multi-purpose tetrapyrrolic chromophores. In particular, three novel C-C bond-fused porphyrin-hexabenzocoronene (HBC) conjugates were synthesized under oxidative cyclodehydrogenation conditions, starting from tailor-made nickel porphyrin precursors. The fusion of the individual aromatic systems via 5-membered rings led to highly soluble π-extended porphyrins in excellent yields. The resulting porphyrin-HBC conjugates exhibit absorption cross-sections that are of interdisciplinary interest in the ever-growing field of organic photovoltaics and near-infrared (NIR) dyes. Quantum chemical calculations show that the newly formed 5-membered rings induce biradicaloid character in the porphyrin core, which has a strong impact on excited state lifetimes. This is confirmed by a thorough optoelectronic and time-resolved characterization in order to understand these unique features better. Broadened absorption characteristics go hand-in-hand with short-lived excited states with up to six orders of magnitude faster decay rates.

Synthesis of All-Benzene Multi-Macrocyclic Nanocarbons by Post-Functionalization of meta-Cycloparaphenylenes.

Expanding the diversity of multi-macrocyclic nanocarbons, particularly those with all-benzene scaffolds, represents intriguing yet challenging synthetic tasks. Complementary to the existing synthetic approaches, here we report an efficient and modular post-functionalization strategy that employs iridium-catalyzed C-H borylation of the highly strained meta-cycloparaphenylenes (mCPPs) and an mCPP-derived catenane. Based on the functionalized macrocyclic synthons, a number of novel all-benzene topological structures including linear and cyclic chains, polycatenane, and pretzelane have been successfully prepared and characterized, thereby showcasing the synthetic utility and potential of the post-functionalization strategy.

Template Assisted Synthesis of Linear [5]Catenane by Post-Functionalization of Templated [2]Catenane and Using Click Reaction.

Polymers with all mechanically interlocked rings, such as linear [n]catenanes, have great potential as functional materials due to possible higher degrees of freedom that may contribute to their flexibility but remain elusive. All the synthetic methods used to prepare such a polymer yield mixtures of products. In the absence of higher molecular weight linear [n]catenanes, emphasis on synthesizing low molecular weight oligomers is being pursued. Here, we have described the synthesis of a linear [5]catenane by post-functionalizing a Co(III) templated [2]catenane having a pyridine-diamide unit free for further metal ion coordination. Two molecules were synthesized with suitable threading groups: one, two terminal azide groups, and two, with two terminal alkyne groups to form two [3]pseudorotaxane utilizing Co(III) coordination. These units were then joined, forming a macrocycle, using click reaction, giving the desired metalated linear [5]catenane in 40 % yield. Removal of metal ions leads to linear [5]catenane. In addition, the formation of linear [3] and [2]catenane are also observed. All synthesized structures have been isolated by column chromatographic technique and characterized by 1H-NMR, 13C-NMR, and mass spectroscopy.

Template Assisted One-Pot Synthesis of [2], Linear [3], and Radial [4]Catenane via Click Reaction.

Design and synthesis of higher order catenane are unexpectedly complex and involve precise cooperation among the precursors overcoming competing and opposing interactions. We achieved synthesis of [2], linear [3], radial [4] in a one-pot reaction by consecutive ring closing through click reactions. This synthesis gave three isolable products due to two, four, and six-click reactions between suitable coupling partners. Yields of the isolate templated-catenane decrease from lower to higher-ordered catenane (40 %, 12 %, and 4 %), probably due to the bite angle as well as the flexibility of the reacting partners. Removal of templating cobalt(III) ion leads to the formation of fully organic [2], linear [3], and radial [4]catenane. These synthesized catenanes were purified by column chromatography and characterized by 1H-NMR, 13C-NMR, and ESI-MS spectroscopy. The synthesized catenanes have free binding sites suitable for post-functionalization and may be used for the synthesis of higher-ordered catenane.

Clustering Six Electrons within "Dawson-Like" Polyoxometalate: An Open Route toward Its Post-functionalization.

Super-reduction of polyoxometalates (POMs) in solution is of fundamental interest for designing innovative energy storage systems. In this article, we show that the "Dawson-like" POM can undergo a disproportionation process during its massive electron uptake, leading to species containing three metal-metal bonds as evidenced by X-ray diffraction, multi-nuclear magnetic resonance spectroscopy (1 H and 183 W NMR), extended X-ray absorption fine structure (EXAFS), UV/Vis, and voltammetry techniques. This result indicates that electron storing within metal-metal bonds is not a unique property of Keggin-type POM as postulated since the 70s. Besides, we demonstrate that the presence of an electron-rich triad in the "Dawson-like" POM allows its post-functionalization with additional tungstate ions, generating a chiral molecule that is also the largest WIV -containing POMs known to date.

Water-Soluble Squaramide-Functionalized Copolymers for Anion Recognition.

A series of ethylene glycol-based squaramide-containing copolymers are synthesized via a post-polymerization functionalization strategy. Conversion of polymeric amines to squaramides is found to proceed in good yields, representing a versatile method of incorporating squaramides into polymers for anion recognition. Analysis of the polymers by UV-Vis and fluorescence spectroscopy revealed that anion binding takes place similarly to that of small-molecule squaramides. The presence of a fluorescent sensing group on polymer-bound squaramides allowed for a fluorescent sensing mechanism for anions that followed a similar trend in selectivity in aqueous DMSO solution, with selectivity observed for H2 PO4 - , AcO- and SO4 2- over other common anions tested. The anion response and selectivity towards anions is similar to that of analogous small-molecule squaramides, however polymeric squaramides exhibited a greater resistance to deprotonation by more basic anions, which is attributed to the closer proximity of individual squaramides on a macromolecule. The squaramide-containing polymers exhibited good water solubility, overcoming a common problem for anion sensors which are typically not sufficiently soluble in water to function in many required applications. Despite no anion binding being observed in water, this study represents a simple and effective method of creating fully water-soluble anion receptors which may be adapted to give improved binding affinity and selectivity depending on the anion binding moiety.

Noncovalent Modification of Cycloparaphenylene by Catenane Formation Using an Active Metal Template Strategy.

The active metal template (AMT) strategy is a powerful tool for the formation of mechanically interlocked molecules (MIMs) such as rotaxanes and catenanes, allowing the synthesis of a variety of MIMs, including π-conjugated and multicomponent macrocycles. Cycloparaphenylene (CPP) is an emerging molecule characterized by its cyclic π-conjugated structure and unique properties. Therefore, diverse modifications of CPPs are necessary for its wide application. However, most CPP modifications require early stage functionalization and the direct modification of CPPs is very limited. Herein, we report the synthesis of a catenane consisting of [9]CPP and a 2,2'-bipyridine macrocycle as a new CPP analogue that contains a reliable synthetic scaffold enabling diverse and concise post-modification. Following the AMT strategy, the [9]CPP-bipyridine catenane was successfully synthesized through Ni-mediated aryl-aryl coupling. Catalytic C-H borylation/cross-coupling and metal complexation of the bipyridine macrocycle moiety, an effective post-functionalization method, were also demonstrated with the [9]CPP-bipyridine catenane. Single-crystal X-ray structural analysis revealed that the [9]CPP-bipyridine catenane forms a tridentated complex with an Ag ion inside the CPP ring. This interaction significantly enhances the phosphorescence lifetime through improved intermolecular interactions.

Novel organoboron complexes with robust core: Synthesis, functionalization, and subcellular targeting.

The construction of novel organoboron complexes with facile synthesis and unique advantages for biological imaging remains a challenge and thus has garnered considerable attention. Herein, we developed a new molecular platform, boron indolin-3-one-pyrrol (BOIN3OPY) via a two-step sequential reaction. The molecular core is robust enough to allow for post-functionalization to produce versatile dyes. When compared to the standard BODIPY, these dyes feature an N,O-bidentate seven-membered ring center, significantly redshifted absorption, and a larger Stokes shift. This study establishes a new molecular platform that provides more flexibility for the functional regulation of dyes.

Synthesis, Post-Functionalization and Properties of Diphosphapentaarenes.

Linearly-fused polyarenes are an important class of compounds with high relevance in materials science. While modifying the shape and size represents a common means to fine-tune their properties, the precise placement of heteroatoms is a strategy that is receiving an increasing deal of attention to overcome the intrinsic limitations of all-carbon structures. Thus, linearly-fused diphosphaarenes recently emerged as a novel family of molecules with striking optoelectronic properties and outstanding stability. However, the properties of diphosphaarenes are far from being benchmarked. Herein, we report the synthesis, phosphorus post-functionalization and properties of new diphosphapentaarene derivatives. We describe their synthetic limitations and unveil their potential for optoelectronic applications.

Inspired by the Nature: A Post-printed Strategy to Efficiently Elaborate Parahydrophobic Surfaces.

The lack of drinkable water is one of the most significant risks for the future of the humanity. Estimates show that in the near future, this risk will become the origin of massive migrations leading to humanitarian disaster. As consequence, the development of solutions to provide water is becoming ever more critical, and a significant effort is devoted to identifying new sources of water. Among the developed strategies, fog harvesting, which takes advantage of atmospheric water to provide potable water, is a solution of interest due to its potential in sustainable development. Unfortunately, this approach suffers from low yield. In the present work, we take inspiration from living species to design and elaborate surfaces with high potential for water harvesting applications. This work takes advantage of 3D-printing and post-printing functionalization to elaborate a strategy that allows modelling, printing, and functionalization of surfaces to yield parahydrophobic behavior. The roughness and surface morphology of the prepared surfaces were investigated. These characteristics were then related to the observed wettability and potential of the functionalized interfaces for water harvesting applications. This work highlights significant variations in surface wettability via surface modification; strong hydrophobic behavior was observed via modification with linear carboxylic acids particularly for surfaces bearing vertical blades (plate with vertical blades and grid with vertical blades).

Systematic Modulation of Thiol Functionalities in Inexpensive Porous Polymers for Effective Mercury Removal.

Through accumulation, mercury contamination in aquatic systems still poses serious health risks despite the strict regulations on drinking water and industrial discharge. One effective strategy against this is adsorptive removal, in which a suitably functionalized porous material is added to water treatment protocols. Thiol (SH) group-grafted structures perform commendably; however, insufficient attention is paid to the cost, scalability, and reusability or how the arrangement of sulfur atoms could affect the HgII binding strength. We used an inexpensive and scalable porous covalent organic polymer (COP-130) to systematically introduce thiol functional groups with precise chain lengths and sulfur content. Thiol-functionalized COP-130 demonstrates enhanced wettability and excellent HgII uptake of up to 936 mg g-1 , with fast kinetics and exceptionally high selectivity. These Hg adsorbents are easily regenerated with HCl and can be used at least six times without loss of capacity even after treatment with strong acid, a rare performance in the domain of Hg-removal research.

Heterobimetallic Gold/Ruthenium Complexes Synthesized via Post-functionalization and Applied in Dual Photoredox Gold Catalysis.

The synthesis of heterobimetallic AuI /RuII complexes of the general formula syn- and anti-[{AuCl}(L1∩L2){Ru(bpy)2 }][PF6 ]2 is reported. The ditopic bridging ligand L1∩L2 refers to a P,N hybrid ligand composed of phosphine and bipyridine substructures, which was obtained via a post-functionalization strategy based on Diels-Alder reaction between a phosphole and a maleimide moiety. It was found that the stereochemistry at the phosphorus atom of the resulting 7-phosphanorbornene backbone can be controlled by executing the metal coordination and the cycloaddition reaction in a different order. All precursors, as well as the mono- and multimetallic complexes, were isolated and fully characterized by various spectroscopic methods such as NMR, IR, and UV-vis spectroscopy as well as cyclic voltammetry. Photophysical measurements show efficient phosphorescence for the investigated monometallic complex anti-[(L1∩L2){Ru(bpy)2 }][PF6 ]2 and the bimetallic analogue syn-[{AuCl}(L1∩L2){Ru(bpy)2 }][PF6 ]2 , thus indicating a small influence of the {AuCl} fragment on the photoluminescence properties. The heterobimetallic AuI /RuII complexes syn- and anti-[{AuCl}(L1∩L2){Ru(bpy)2 }][PF6 ]2 are both active catalysts in the P-arylation of aryldiazonium salts promoted by visible light with H-phosphonate affording arylphosphonates in yields of up to 91 %. Both dinuclear complexes outperform their monometallic counterparts.

Direct-Ink Write 3D Printing Multistimuli-Responsive Hydrogels and Post-Functionalization Via Disulfide Exchange.

Herein, we describe a multi-stimuli-responsive hydrogel that can be 3D printed via a direct-ink write process to afford cross-linked hydrogel networks that can be post-functionalized with thiol-bearing molecules. Poly(alkyl glycidyl ether)s with methacrylate groups at their termini were synthesized and self-assembled into hydrogels with three key stimuli-responsive behaviors necessary for extrusion based 3D printing: a sol-gel temperature response, shear-thinning behavior, and the ability to be photochemically crosslinked. In addition, the chemically crosslinked hydrogels demonstrated a temperature dependent swelling consistent with an LCST behavior. Pyridyl disulfide urethane methacrylate (PDS-UM) monomers were introduced into the network as a thiol-reactive handle for post-functionalization of the hydrogel. The reactivities of these hydrogels were investigated at different temperatures (5, 25, 37 °C) and swelling statuses (as-cured versus preswollen) using glutathione as a reactive probe. To illustrate the versatility of the platform, a number of additional thiol-containing probes such as proteins, polymers, and small molecules were conjugated to the hydrogel network at different temperatures, pH's, and concentrations. In a final demonstration of the multi-stimuli-responsive hydrogel platform, a customized DIW 3D printer was used to fabricate a printed object that was subsequently conjugated with a fluorescent tag and displayed the ability to change in size with environmental temperature.

Bioinspired and Post-Functionalized 3D-Printed Surfaces with Parahydrophobic Properties.

Desertification is a growing risk for humanity. Studies show that water access will be the leading cause of massive migration in the future. For this reason, significant research efforts are devoted to identifying new sources of water. Among this work, one of the more interesting strategies takes advantage of atmospheric non-liquid water using water harvesting. Various strategies exist to harvest water, but many suffer from low yield. In this work, we take inspiration from a Mexican plant (Echeveria pulvinate) to prepare a material suitable for future water harvesting applications. Observation of E. pulvinate reveals that parahydrophobic properties are favorable for water harvesting. To mimic these properties, we leveraged a combination of 3D printing and post-functionalization to control surface wettability and obtain parahydrophobic properties. The prepared surfaces were investigated using IR and SEM. The surface roughness and wettability were also investigated to completely describe the elaborated surfaces and strongly hydrophobic surfaces with parahydrophobic properties are reported. This new approach offers a powerful platform to develop parahydrophobic features with desired three-dimensional shape.

Versatile Covalent Postsynthetic Modification of Metal Organic Frameworks via Thermal Condensation for Fluoride Sensing in Waters.

Having access to safe drinking water is one of the 17 sustainable development goals defined by the United Nations (UN). However, many settlements around the globe have limited access to drinkable water due to non-anthropogenic pollution of the water sources. One of those pollutants is fluoride, which can induce major health problems. In this manuscript, we report on a post synthetic functionalization of metal organic frameworks for the sensing of fluoride in water. The proposed thermal condensation methodology allows for a high yield of functionalization using few steps, reducing reagent costs and generating minimal by-products. We identified a Rhodamine B functionalized Al-BDC-NH2 metal organic framework as one particularly suitable for fluoride detection in water.

Multivalent Protein-Loaded pH-Stable Polymersomes: First Step toward Protein Targeted Therapeutics.

Synthetic platforms for mimicking artificial organelles or for designing multivalent protein therapeutics for targeting cell surface, extracellular matrix, and tissues are in the focus of this study. Furthermore, the availability of a multi-functionalized and stimuli-responsive carrier system is required that can be used for sequential in situ and/or post loading of different proteins combined with post-functionalization steps. Until now, polymersomes exhibit excellent key characteristics to fulfill those requirements, which allow specific transport of proteins and the integration of proteins in different locations of polymeric vesicles. Herein, different approaches to fabricate multivalent protein-loaded, pH-responsive, and pH-stable polymersomes are shown, where a combination of therapeutic action and targeting can be achieved, by first choosing two model proteins such as human serum albumin and avidin. Validation of the molecular parameters of the multivalent biohybrids is performed by dynamic light scattering, cryo-TEM, fluorescence spectroscopy, and asymmetrical flow-field flow fractionation combined with light scattering techniques. To demonstrate targeting functions of protein-loaded polymersomes, avidin post-functionalized polymersomes are used for the molecular recognition of biotinylated cell surface receptors. These versatile protein-loaded polymersomes present new opportunities for designing sophisticated biomolecular nanoobjects in the field of (extracellular matrix) protein therapeutics.

Lighting up the Electrochemiluminescence of Carbon Dots through Pre- and Post-Synthetic Design.

Carbon dots (CDs), defined by their size of less than 10 nm, are a class of photoluminescent (PL) and electrochemiluminescent (ECL) nanomaterials that include a variety of carbon-based nanoparticles. However, the control of their properties, especially ECL, remains elusive and afflicted by a series of problems. Here, the authors report CDs that display ECL in water via coreactant ECL, which is the dominant mechanism in biosensing applications. They take advantage of a multicomponent bottom-up approach for preparing and studying the luminescence properties of CDs doped with a dye acting as PL and ECL probe. The dependence of luminescence properties on the surface chemistry is further reported, by investigating the PL and ECL response of CDs with surfaces rich in primary, methylated, or propylated amino groups. While precursors that contribute to the core characterize the PL emission, the surface states influence the efficiency of the excitation-dependent PL emission. The ECL emission is influenced by surface states from the organic shell, but states of the core strongly interact with the surface, influencing the ECL efficiency. These findings offer a framework of pre- and post-synthetic design strategies to improve ECL emission properties, opening new opportunities for exploring biosensing applications of CDs.

Electricity-Driven Post-Functionalization of Conducting Polymers.

Electrochemical doping of conducting polymers (CPs) generates polarons (radical ionic species) and bipolarons (ionic species) in their backbone via multi-electron transfer between an electrode and the CP. In the electrochemical polymer reaction (ePR), these generated ionic species are regarded as reactive intermediates for further transformation of the chemical structures of CPs. This electrochemical post-functionalization can easily be used to control the degree of reactions by turning a power supply on/off, as well as tuning the applied electrode potential, which leads to fine-tuning of the various properties of the CPs, such as the HOMO/LUMO level and PL properties. This Account summarizes recent developments in the electrochemical post-functionalization of CPs. In particular, we focus on reaction design for the ePR, with respect to the preparation and structure of the precursor polymers, applicable functional groups, efficient reaction conditions, and electrolytic methodologies.

Bio-based Poly(hydroxy urethane)s: Synthesis and Pre/Post-Functionalization.

New and emerging demand for polyurethane (PU) continues to rise over the years. The harmful isocyanate binding agents and their integrated PU products are at the height of environmental concerns, in particular PU (macro and micro) pollution and their degradation problems. Non-isocyanate poly(hydroxy urethane)s (NIPUs) are sustainable and green alternatives to conventional PUs. Since the introduction of NIPU in 1957, the market value of NIPU and its hybridized materials has increased exponentially in 2019 and is expected to continue to rise in the coming years. The secondary hydroxyl groups of these NIPU's urethane moiety have revolutionized them by allowing for adequate pre/post functionalization. This minireview highlights different strategies and advances in pre/post-functionalization used in biobased NIPU. We have performed a comprehensive evaluation of the development of new ideas in this field to achieve more efficient synthetic biobased hybridized NIPU processes through selective and kinetic understanding.

Cationic covalent-organic framework for sulfur storage with high-performance in lithium-sulfur batteries.

Covalent organic frameworks (COFs) with pre-designed structure and customized properties have been employed as sulfur storage materials for lithium-sulfur (Li-S) batteries. In this work, a cationic mesoporous COF (COF-NI) was synthesized by grafting a quaternary ammonium salt group onto the pore channel of COFs via a one-pot three components tandem reaction strategy. The post-functionalized COFs were utilized as the matrix framework to successfully construct the Li-S battery with high-speed capacity and long-term stability. The experimental results showed that, after loading active material sulfur, cationic COF-NI effectively suppressed the shuttle effect of the intermediate lithium polysulfide species in Li-S batteries, and exhibited better cycle stability than the as-obtained neutral COF (COF-Bu). For example, compared with COF-Bu based sulfur cathode (521 mA h g-1), the cationic COF-NI based sulfur cathode maintained a discharge capacity of 758 mA h g-1 after 100 cycles. These results clearly showed that appropriate pore environment of COFs can be prepared by rational design, which can reduce the shuttle effect of lithium polysulfide species and improve the performance of Li-S battery.