Radical chemistry and VOCs-NOx-O3-nitrate sensitivity in the polluted atmosphere of a suburban site in the North China Plain.

In this study, the chemical mechanisms of O3 and nitrate formation as well as the control strategy were investigated based on extensive observations in Tai'an city in the NCP and an observation-constrained box model. The results showed that O3 pollution was severe with the maximum hourly O3 concentration reaching 150 ppb. Higher O3 concentration was typically accompanied by higher PM2.5 concentrations, which could be ascribed to the common precursors of VOCs and NOx. The modeled averaged peak concentrations of OH, HO2, and RO2 were relatively higher compared to previous observations, indicating strong atmospheric oxidation capacity in the study area. The ROx production rate increased from 2.8 ppb h-1 to 5 ppb h-1 from the clean case to the heavily polluted case and was dominated by HONO photolysis, followed by HCHO photolysis. The contribution of radical-self combination to radical termination gradually exceeded NO2 + OH from clean to polluted cases, indicating that O3 formation shifted to a more NOx-limited regime. The O3 production rate increased from 14 ppb h-1 to 22 ppb h-1 from clean to heavily polluted cases. The relative incremental reactivity (RIR) results showed that VOCs and NOx had comparable RIR values during most days, which suggested that decreasing VOCs or NOx was both effective in alleviating O3 pollution. In addition, HCHO, with the largest RIR value, made important contribution to O3 production. The Empirical Kinetic Modeling Approach (EKMA) revealed that synergistic control of O3 and nitrate can be achieved by decreasing both NOx and VOCs emissions (e.g., alkenes) with the ratio of 3:1. This study emphasized the importance of NOx abatement for the synergistic control of O3 and nitrate pollution in the Tai'an area as the sustained emissions control has shifted the O3 and nitrate formation to a more NOx-limited regime.

Noncombustible gel polymer electrolyte inspired by bio-radicalchemistry for high voltage and high safety Ni-rich lithium batteries.

For high energy density lithium-ion batteries (LIBs) with nickel-rich ternary cathodes, the chemical degradation of electrolytes caused by free radical reactions and the hazards of thermal runaway have always been significant challenges. Inspired by the free radical scavenging of living organisms and multiphase synergistic flame retardant mechanism, we innovatively designed and prepared a multifunctional flame retardant HCCP-TMP that combines flame retardancy and free radical scavenging by combining hindered amine and cyclophosphazene. Only 1 wt% HCCP-TMP can make the polyacrylate-based gel polymer electrolyte (GPE) incombustible. Moreover, the equipped NCM811//Graphite pouch cells don't exhibit combustion behavior after thermal runaway and can resist mechanical abuse. Based on the above noncombustible GPE, the NCM811//Li battery exhibits capacity retention rate of 82.2 % after 100 cycles at a current density of 2 C and in the voltage range of 3.0-4.7 V, exhibiting excellent cyclability under high voltage. This simple molecular design simultaneously improves the fire safety and high voltage stability, demonstrating enormous application potential in the field of advanced LIBs with high safety and high energy density.

A Stable Chichibabin Diradicaloid with Near-Infrared Emission.

Conjugated molecules with multiple radical centers such as the iconic Chichibabin diradicaloid hold promise as building blocks in materials for quantum sensing and quantum information processing. However, it is a considerable challenge to design simple analogues of the Chichibabin hydrocarbon that are chemically inert, exhibit high diradical character and emit light at a distinct wavelength that may offer an optical readout of the spin state in functional ensembles. Here we describe the serendipitous discovery of the stable TTM-TTM diradicaloid, which exhibits high diradical character, a striking sky-blue color and near-infrared (NIR) emission (in solution). This combination of properties is unique among related diradicaloids and is due to the presence of hydrogen and chlorine atoms in "just the right positions", allowing a perfectly planar, yet predominantly benzenoid bridge to connect the two sterically stabilized radical centers. In-depth studies of the optical and magnetic properties suggest that this structural motif could become a mainstay building block of organic spin materials.

An Expedient Radical Approach for the Decarboxylative Synthesis of Stereodefined All-Carbon Tetrasubstituted Olefins.

We report a user-friendly approach for the decarboxylative formation of stereodefined and complex tri- and tetra-substituted olefins from vinyl cyclic carbonates and amines as radical precursors. The protocol relies on easy photo-initiated α-amino-radical formation followed by addition onto the double bond of the substrate resulting in a sequence involving carbonate ring-opening, double bond relay, CO2 extrusion and finally O-protonation. The developed protocol is efficient for both mismatched and matched polarity substrate combinations, and the scope of elaborate stereodefined olefins that can be forged including drug-functionalized derivatives is wide, diverse and further extendable to other types of heterocyclic and radical precursors. Mechanistic control reactions show that the decarboxylation step is a key driving force towards product formation, with the initial radical addition under steric control.

Development of a Five-Chemical-Probe Method to Determine Multiple Radicals Simultaneously in Hydroxyl and Sulfate Radical-Mediated Advanced Oxidation Processes.

Advanced oxidation processes (AOPs), such as hydroxyl radical (HO•)- and sulfate radical (SO4•-)-mediated oxidation, are attractive technologies used in water and wastewater treatments. To evaluate the treatment efficiencies of AOPs, monitoring the primary radicals (HO• and SO4•-) as well as the secondary radicals generated from the reaction of HO•/SO4•- with water matrices is necessary. Therefore, we developed a novel chemical probe method to examine five key radicals simultaneously, including HO•, SO4•-, Cl•, Cl2•-, and CO3•-. Five probes, including nitrobenzene, para-chlorobenzoic acid, benzoic acid, 2,4,6-trimethylbenzoic acid, and 2,4,6-trimethylphenol, were selected in this study. Their bimolecular reaction rate constants with diverse radicals were first calibrated under the same conditions to minimize systematic errors. Three typical AOPs (UV/H2O2, UV/S2O82-, and UV/HSO5-) were tested to obtain the radical steady-state concentrations. The effects of dissolved organic matter, Br-, and the probe concentration were inspected. Our results suggest that the five-probe method can accurately measure radicals in the HO•- and SO4•--mediated AOPs when the concentration of Br- and DOM are less than 4.0 µM and 15 mgC L-1, respectively. Overall, the five-probe method is a practical and easily accessible method to determine multiple radicals simultaneously.

Triply Selective & Sequential Diversification at Csp 3: Expansion of Alkyl Germane Reactivity for C-C & C-Heteroatom Bond Formation.

We report the triply selective and sequential diversification of a single Csp 3 carbon carrying Cl, Bpin and GeEt3 for the modular and programmable construction of sp3-rich molecules. Various functionalizations of Csp 3-Cl and Csp 3-BPin (e.g. alkylation, arylation, homologation, amination, hydroxylation) were tolerated by the Csp 3-GeEt3 group. Moreover, the methodological repertoire of alkyl germane functionalization was significantly expanded beyond the hitherto known Giese addition and arylation to alkynylation, alkenylation, cyanation, halogenation, azidation, C-S bond formation as well as the first demonstration of stereo-selective functionalization of a Csp 3-[Ge] bond.

A Metal-Free and Operationally Simple Radical Trifluoromethylative Borylation of Unactivated Alkenes.

We herein describe a protocol to synthesize trifluoromethylated alkyl boronates from alkenes by the mutual activation of the Togni II and the bis(catecholato)diboron reagents in the absence of any catalyst and additives. This reaction enables synthesizing a series of trifluoromethylated alkyl boronates using unactivated alkenes, including natural products and drug derivatives, in a regioselective manner. Moreover, the synthetic utility of the boronic ester present in the product allows access to a range of trifluoromethyl containing compounds. The radical trapping and gas detection experiments reveal that the more Lewis acidic diboron reagent determines the rapid formation of trifluoromethyl and boron centered radicals.

Bismuth in Radical Chemistry and Catalysis.

Whereas indications of radical reactivity in bismuth compounds can be traced back to the 19th century, the preparation and characterization of both transient and persistent bismuth-radical species has only been established in recent decades. These advancements led to the emergence of the field of bismuth radical chemistry, mirroring the progress seen for other main-group elements. The seminal and fundamental studies in this area have ultimately paved the way for the development of catalytic methodologies involving bismuth-radical intermediates, a promising approach that remains largely untapped in the broad landscape of synthetic organic chemistry. In this review, we delve into the milestones that eventually led to the present state-of-the-art in the field of radical bismuth chemistry. Our focus aims at outlining the intrinsic discoveries in fundamental inorganic/organometallic chemistry and contextualizing their practical applications in organic synthesis and catalysis.

Radical chemistry in polymer science: an overview and recent advances.

Radical chemistry is one of the most important methods used in modern polymer science and industry. Over the past century, new knowledge on radical chemistry has both promoted and been generated from the emergence of polymer synthesis and modification techniques. In this review, we discuss radical chemistry in polymer science from four interconnected aspects. We begin with radical polymerization, the most employed technique for industrial production of polymeric materials, and other polymer synthesis involving a radical process. Post-polymerization modification, including polymer crosslinking and polymer surface modification, is the key process that introduces functionality and practicality to polymeric materials. Radical depolymerization, an efficient approach to destroy polymers, finds applications in two distinct fields, semiconductor industry and environmental protection. Polymer chemistry has largely diverged from organic chemistry with the fine division of modern science but polymer chemists constantly acquire new inspirations from organic chemists. Dialogues on radical chemistry between the two communities will deepen the understanding of the two fields and benefit the humanity.

Controllable Regiodivergent Alkynylation of 1,3-Bis(Boronic) Esters Activated by Distinct Organometallic Reagents.

1,3-Bis(boronic) esters can be readily synthesized from alkylBpin precursors. Selective transformations of these compounds hold the potential for late-stage functionalization of the remaining C-B bond, leading to a diverse array of molecules. Currently, there are no strategies available to address the reactivity and, more importantly, the controllable regiodivergent functionalization of 1,3-bis(boronic) esters. In this study, we have achieved controllable regiodivergent alkynylation of these molecules. The regioselectivity has been clarified based on the unique chelation patterns observed with different organometallic reagents. Remarkably, this methodology effectively addresses the low reactivity of 1,3-bis(boronic) esters and bridges the gap in radical chemistry, which typically yields only the classical products formed via stable radical intermediates. Furthermore, the compounds synthesized through this approach serve as potent building blocks for creating molecular diversity.

Recent Advances in the Enantioselective Radical Reactions.

The review covers research published since 2017 and is focused on enantioselective synthesis using radical reactions. It describes recent approaches to the asymmetric synthesis of chiral molecules based on the application of the metal catalysis, dual metal and organocatalysis and finally, pure organocatalysis including enzyme catalysis. This review focuses on the synthetic aspects of the methodology and tries to show which compounds can be obtained in enantiomerically enriched forms.

Growing Utilization of Radical Chemistry in the Synthesis of Pharmaceuticals.

Our current unhealthy lifestyle and the exponential surge in the population getting affected by a variety of diseases have made pharmaceuticals or drugs an imperative part of life, making the development of innovative strategies for drug discovery or the introduction of refined, cost-effective and modern technologies for the synthesis of clinically used drugs, a need of the hour. Ever since their discovery, free radicals and radical cations or anions as reactive intermediates have captivated the chemists, resulting in an exceptional utilization of these moieties throughout the field of chemical synthesis, owing to their unprecedented and widespread reactivity. Sticking with the idea of not judging the book by its cover, despite the conventional thought process of radicals being unstable and difficult to control entities, scientists and academicians around the globe have done an appreciable amount of work utilizing both persistent as well as transient radicals for a variety of organic transformations, exemplifying them with the synthesis of significant biologically active pharmaceutical ingredients. This review truly accounts for the organic radical transformations including radical addition, radical cascade cyclization, radical/radical cross-coupling, coupling with metal-complexes and radical cations coupling with nucleophiles, that offers fascinating and unconventional approaches towards the construction of intricate structural frameworks of marketed APIs with high atom- and step-economy; complementing the otherwise employed traditional methods. This tutorial review presents a comprehensive package of diverse methods utilized for radical generation, featuring their reactivity to form critical bonds in pharmaceutical total synthesis or in building key starting materials or intermediates of their synthetic journey, acknowledging their excellence, downsides and underlying mechanisms, which are otherwise poorly highlighted in the literature. Despite great achievements over the past few decades in this area, many challenges and obstacles are yet to be unraveled to shorten the distance between the academics and the industry, which are all discussed in summary and outlook.

A General Light-Driven Organocatalytic Platform for the Activation of Inert Substrates.

Due to their strong covalent bonds and low reduction potentials, activating inert substrates is challenging. Recent advances in photoredox catalysis offered a number of solutions, each of which useful for activating specific inert bonds. Developing a general catalytic platform that can consistently target a broad range of inert substrates would be synthetically useful. Herein, we report a readily available indole thiolate organocatalyst that, upon excitation with 405 nm light, acquires a strongly reducing power. This excited-state reactivity served to activate, by single-electron reduction, strong C-F, C-Cl, and C-O bonds in both aromatic and aliphatic substrates. This catalytic platform was versatile enough to promote the reduction of generally recalcitrant electron-rich substrates (Ered <-3.0 V vs SCE), including arenes that afforded 1,4-cyclohexadienes. The protocol was also useful for the borylation and phosphorylation of inert substrates with a high functional group tolerance. Mechanistic studies identified an excited-state thiolate anion as responsible of the highly reducing reactivity.

Harnessing Radicals in Confined Supramolecular Environments Made Possible by MOFs.

Researching and utilizing radical intermediates in organic synthetic chemistry have innovated discoveries in methodology and theory. Reactions concerning free radical species opened new pathways beyond the frame of the two-electron mechanism while commonly characterized as rampant processes lacking selectivity. As a result, research in this field has always focused on the controllable generation of radical species and determining factors of selectivity. Metal-organic frameworks (MOFs) have emerged as compelling candidates as catalysts in radical chemistry. From a catalytic point of view, the porous nature of MOFs entails an inner phase for the reaction that could offer possibilities for the regulation of reactivity and selectivity. From a material science perspecti ve, MOFs are organic-inorganic hybrid materials that integrate functional units in organic compounds and complex forms in the tunable long-ranged periodic structure. In this account, we summarized our progress in the application of MOFs in radical chemistry in three parts: (1) The generation of radical species; (2) The weak interactions and site selectivity; (3) Regio- and stereo-selectivity. The unique role of MOFs play in these paradigms is demonstrated in a supramolecular narrative through the analyses of the multi-constituent collaboration within the MOF and the interactions between MOFs and the intermediates during the reactions.

Assessing the Use of Probes and Quenchers for Understanding the Reactive Species in Advanced Oxidation Processes.

Advanced oxidation processes (AOPs) are increasingly applied in water and wastewater treatment. Understanding the role of reactive species using probes and quenchers is one of the main requirements for good process design. However, much fundamental kinetic data for the reactions of probes and quenchers with reactive species is lacking, probably leading to inappropriate probe and quencher selection and dosing. In this work, second-order rate constants for over 150 reactions of probes and quenchers with reactive species such as •OH, SO4•-, and Cl• and chemical oxidants such as free chlorine and persulfate were determined. Some previously ill-quantified reactions (e.g., furfuryl alcohol and methyl phenyl sulfoxide reactions with certain chemical oxidants, nitrobenzene and 1,4-dioxane reactions with certain halogen radicals) were found to be kinetically favorable. The selection of specific probes can be guided by the improved kinetic database. The criteria for properly choosing dosages of probes and quenchers were proposed along with a procedure for quantifying reactive species free of interference from probe addition. The limitations of probe and quencher approaches were explicated, and possible solutions (e.g., the combination with other tools) were proposed. Overall, the kinetic database and protocols provided in this work benefit future research in understanding the radical chemistry in AOPs as well as other radical-involved processes.

1,2-Difunctionalization of Acetylene Enabled by Light.

Although the direct conversion of gaseous acetylene into value-added liquid commodity chemicals is becoming increasingly attractive, the majority of the established methodologies are focused on cross-coupling, hydro-functionalization, and polymerization. Herein, we describe a 1,2-difunctionalization method that inserts acetylene directly into readily available bifunctional reagents. This method provides access to diverse C2-linked 1,2-bis-heteroatom products in high regio- and stereoselectivity along with opening up previously unexplored synthetic directions. In addition, we demonstrate this method's synthetic potential by converting the obtained products into diverse functionalized molecules and chiral sulfoxide-containing bidentate ligands. Using a combination of experimental and theoretical methods, the mechanism for this insertion reaction was investigated.

Studies on the Oxidation of Aromatic Amines Catalyzed by Trametes versicolor Laccase.

The bio-oxidation of a series of aromatic amines catalyzed by T. versicolor laccase has been investigated exploiting either commercially available nitrogenous substrates [(E)-4-vinyl aniline and diphenyl amine] or ad hoc synthetized ones [(E)-4-styrylaniline, (E)-4-(prop-1-en-1-yl)aniline and (E)-4-(((4-methoxyphenyl)imino)methyl)phenol]. At variance to their phenolic equivalents, the investigated aromatic amines were not converted into the expected cyclic dimeric structures under T. versicolor catalysis. The formation of complex oligomeric/polymeric or decomposition by-products was mainly observed, with the exception of the isolation of two interesting but unexpected chemical skeletons. Specifically, the biooxidation of diphenylamine resulted in an oxygenated quinone-like product, while, to our surprise, in the presence of T. versicolor laccase (E)-4-vinyl aniline was converted into a 1,2-substited cyclobutane ring. To the best of our knowledge, this is the first example of an enzymatically triggered [2 + 2] olefin cycloaddition. Possible reaction mechanisms to explain the formation of these products are also reported.

Copper-Catalyzed Chemo- and Enantioselective Radical 1,2-Carbophosphonylation of Styrenes.

The copper-catalyzed enantioselective radical difunctionalization of alkenes from readily available alkyl halides and organophosphorus reagents possessing a P-H bond provides an appealing approach for the synthesis of α-chiral alkyl phosphorus compounds. The major challenge arises from the easy generation of a P-centered radical from the P-H-type reagent and its facile addition to the terminal side of alkenes, leading to reverse chemoselectivity. We herein disclose a radical 1,2-carbophosphonylation of styrenes in a highly chemo- and enantioselective manner. The key to the success lies in not only the implementation of dialkyl phosphites with a strong bond dissociation energy to promote the desired chemoselectivity but also the utilization of an anionic chiral N,N,N-ligand to forge the chiral C(sp3 )-P bond. The developed Cu/N,N,N-ligand catalyst has enriched our library of single-electron transfer catalysts in the enantioselective radical transformations.

Electroreductively Induced Radicals for Organic Synthesis.

Organic electrochemistry has attracted tremendous interest within the novel sustainable methodologies that have not only reduced the undesired byproducts, but also utilized cleaner and renewable energy sources. Particularly, oxidative electrochemistry has gained major attention. On the contrary, reductive electrolysis remains an underexplored research direction. In this context, we discuss advances in transition-metal-free cathodically generated radicals for selective organic transformations since 2016. We highlight the electroreductive reaction of alkyl radicals, aryl radicals, acyl radicals, silyl radicals, fluorosulfonyl radicals and trifluoromethoxyl radicals.

Pollution mechanisms and photochemical effects of atmospheric HCHO in a coastal city of southeast China.

Formaldehyde (HCHO) is a vital reactive carbonyl compound, which plays an important role in the photochemical process and atmospheric oxidation capacity. However, the current studies on the quantification of HCHO impacts on atmospheric photochemistry in southeast coastal areas of China with an obvious upward trend of ozone remain scarce and unclear, thus limiting the full understanding of formation mechanism and control strategy of photochemical pollution. Here, systematic field campaigns were conducted at a typical coastal urban site with good air quality to reveal HCHO mechanism and effects on O3 pollution mechanism during spring and autumn, when photochemical pollution events still frequently appeared. Positive Matrix Factorization model results showed that secondary photochemical formation made the largest contributions to HCHO (69 %) in this study. Based on the photochemical model, the HCHO loss rates in autumn were significantly higher than those in spring (P < 0.05), indicating that strong photochemical conditions constrain high HCHO levels in certain situations. HCHO mechanism increased the ROx concentrations by 36 %, and increased net O3 production rates by 31 %, manifesting that the reduction of HCHO and its precursors' emissions would effectively mitigate O3 pollution. Therefore, the pollution characteristics and photochemical effects of HCHO provided significant guidance for future photochemical pollution control in relatively clean areas.