Next-generation risk assessment read-across case study: application of a 10-step framework to derive a safe concentration of daidzein in a body lotion.

Introduction: We performed an exposure-based Next Generation Risk Assessment case read-across study using New Approach Methodologies (NAMs) to determine the highest safe concentration of daidzein in a body lotion, based on its similarities with its structural analogue, genistein. Two assumptions were: (1) daidzein is a new chemical and its dietary intake omitted; (2) only in vitro data were used for daidzein, while in vitro and legacy in vivo data for genistein were considered. Methods: The 10-step tiered approach evaluating systemic toxicity included toxicokinetics NAMs: PBPK models and in vitro biokinetics measurements in cells used for toxicogenomics and toxicodynamic NAMs: pharmacology profiling (i.e., interaction with molecular targets), toxicogenomics and EATS assays (endocrine disruption endpoints). Whole body rat and human PBPK models were used to convert external doses of genistein to plasma concentrations and in vitro Points of Departure (PoD) to external doses. The PBPK human dermal module was refined using in vitro human skin metabolism and penetration data. Results: The most relevant endpoint for daidzein was from the ERα assay (Lowest Observed Effective Concentration was 100 ± 0.0 nM), which was converted to an in vitro PoD of 33 nM. After application of a safety factor of 3.3 for intra-individual variability, the safe concentration of daidzein was estimated to be 10 nM. This was extrapolated to an external dose of 0.5 µg/cm2 for a body lotion and face cream, equating to a concentration of 0.1%. Discussion: When in vitro PoD of 33 nM for daidzein was converted to an external oral dose in rats, the value correlated with the in vivo NOAEL. This increased confidence that the rat oral PBPK model provided accurate estimates of internal and external exposure and that the in vitro PoD was relevant in the safety assessment of both chemicals. When plasma concentrations estimated from applications of 0.1% and 0.02% daidzein were used to calculate bioactivity exposure ratios, values were >1, indicating a good margin between exposure and concentrations causing adverse effects. In conclusion, this case study highlights the use of NAMs in a 10-step tiered workflow to conclude that the highest safe concentration of daidzein in a body lotion is 0.1%.

A Comparison of Machine Learning Approaches for predicting Hepatotoxicity potential using Chemical Structure and Targeted Transcriptomic Data.

Animal toxicity testing is time and resource intensive, making it difficult to keep pace with the number of substances requiring assessment. Machine learning (ML) models that use chemical structure information and high-throughput experimental data can be helpful in predicting potential toxicity . However, much of the toxicity data used to train ML models is biased with an unequal balance of positives and negatives primarily since substances selected for in vivo testing are expected to elicit some toxicity effect. To investigate the impact this bias had on predictive performance, various sampling approaches were used to balance in vivo toxicity data as part of a supervised ML workflow to predict hepatotoxicity outcomes from chemical structure and/or targeted transcriptomic data. From the chronic, subchronic, developmental, multigenerational reproductive, and subacute repeat-dose testing toxicity outcomes with a minimum of 50 positive and 50 negative substances, 18 different study-toxicity outcome combinations were evaluated in up to 7 ML models. These included Artificial Neural Networks, Random Forests, Bernouilli Naïve Bayes, Gradient Boosting, and Support Vector classification algorithms which were compared with a local approach, Generalised Read-Across (GenRA), a similarity-weighted k-Nearest Neighbour (k-NN) method. The mean CV F1 performance for unbalanced data across all classifiers and descriptors for chronic liver effects was 0.735 (0.0395 SD). Mean CV F1 performance dropped to 0.639 (0.073 SD) with over-sampling approaches though the poorer performance of KNN approaches in some cases contributed to the observed decrease (mean CV F1 performance excluding KNN was 0.697 (0.072 SD)). With under-sampling approaches, the mean CV F1 was 0.523 (0.083 SD). For developmental liver effects, the mean CV F1 performance was much lower with 0.089 (0.111 SD) for unbalanced approaches and 0.149 (0.084 SD) for under-sampling. Over-sampling approaches led to an increase in mean CV F1 performance (0.234, (0.107 SD)) for developmental liver toxicity. Model performance was found to be dependent on dataset, model type, balancing approach and feature selection. Accordingly tailoring ML workflows for predicting toxicity should consider class imbalance and rely on simpler classifiers first.

A systematic analysis of read-across within REACH registration dossiers.

Read-across is a well-established data-gap filling technique used within analogue or category approaches. Acceptance remains an issue, mainly due to the difficulties of addressing residual uncertainties associated with a read-across prediction and because assessments are expert-driven. Frameworks to develop, assess and document read-across may help reduce variability in read-across results. Data-driven read-across approaches such as Generalised Read-Across (GenRA) include quantification of uncertainties and performance. GenRA also affords opportunities on how New Approach Method (NAM) data can be systematically incorporated to support the read-across hypothesis. Herein, a systematic investigation of differences in expert-driven read-across with data-driven approaches was pursued in terms of establishing scientific confidence in the use of read-across. A dataset of expert-driven read-across assessments that made use of registration data as disseminated in the public International Uniform Chemical Information Database (IUCLID) (version 6) of Registration, Evaluation, Authorisation and Restriction of Chemicals (REACH) Study Results were compiled. A dataset of ~5000 read-across cases pertaining to repeated dose and developmental toxicity was extracted and mapped to content within EPA's Distributed Structure Searchable Toxicity database (DSSTox) to retrieve chemical name and structural identification information. Content could be mapped to ~3600 cases which when filtered for unique cases with curated quantitative structure-activity relationship-ready SMILES resulted in 389 target-source analogue pairs. The similarity between target and the source analogues on the basis of different contexts - from structural similarity using chemical fingerprints to metabolic similarity using predicted metabolic information was evaluated. An attempt was also made to quantify the relative contribution each similarity context played relative to the target-source analogue pairs by deriving a model which predicted known analogue pairs. Finally, point of departure values (PODs) were predicted using the GenRA approach underpinned by data extracted from the EPA's Toxicity Values Database (ToxValDB). The GenRA predicted PODs were compared with those reported within the REACH dossiers themselves. This study offers generalisable insights on how read-across is already applied for regulatory submissions and expectations on the levels of similarity necessary to make decisions.

Grouping of short alkyl-chain branched carboxylic acids for developmental toxicity.

Read-across (RAx) and grouping of chemicals into categories are well-known concepts in toxicology. Recently, ECHA proposed a grouping approach for branched-chain carboxylic acids (BCAs) including more than 60 branched-chain saturated carboxylic acids for hazard identification. Grouping was based only on structural considerations. Due to developmental effects of two members, ECHA postulated that "all short carbon chain acids … are likely reproductive and developmental toxicants". This work analyzes available data for BCAs. The number of compounds in the group can be significantly reduced by eliminating metal and organic salts of BCAs, compounds of unknown or variable composition, and complex reaction products or biological materials (UVCB compounds). For the resulting reduced number of compounds, grouping is supported by similar physicochemical data and expected similar biotransformation. However, analysis of adverse effects for compounds in the group and mechanistic information show that BCAs, as a class, do not cause developmental effects in rats. Rather, developmental toxicity is limited to selected BCAs with specific structures that share a common mode of action (histone deacetylase inhibition). Thus, the proposed grouping is unreasonably wide and the more detailed analyses show that structural similarity alone is not sufficient for grouping branched-chain carboxylic acids for developmental toxicity.

DeepRA: A novel deep learning-read-across framework and its application in non-sugar sweeteners mutagenicity prediction.

Non-sugar sweeteners (NSSs) or artificial sweeteners have long been used as food chemicals since World War II. NSSs, however, also raise a concern about their mutagenicity. Evaluating the mutagenic ability of NSSs is crucial for food safety; this step is needed for every new chemical registration in the food and pharmaceutical industries. A computational assessment provides less time, money, and involved animals than the in vivo experiments; thus, this study developed a novel computational method from an ensemble convolutional deep neural network and read-across algorithms, called DeepRA, to classify the mutagenicity of chemicals. The mutagenicity data were obtained from the curated Ames test data set. The DeepRA model was developed using both molecular descriptors and molecular fingerprints. The obtained DeepRA model provides accurate and reliable mutagenicity classification through an independent test set. This model was then used to examine the NSSs-related chemicals, enabling the evaluation of mutagenicity from the NSSs-like substances. Finally, this model was publicly available at https://github.com/taraponglab/deepra for further use in chemical regulation and risk assessment.

Physiologically based kinetic (PBK) modeling of propiconazole using a machine learning-enhanced read-across approach for interspecies extrapolation.

A significant challenge in the traditional human health risk assessment of agrochemicals is the uncertainty in quantifying the interspecies differences between animal models and humans. To work toward a more accurate and animal-free risk determination, new approaches such as physiologically based kinetic (PBK) modeling have been used to perform dosimetry extrapolation from animals to humans. However, the regulatory use and acceptance of PBK modeling is limited for chemicals that lack in vivo animal pharmacokinetic (PK) data, given the inability to evaluate models. To address these challenges, this study developed PBK models in the absence of in vivo PK data for the fungicide propiconazole, an activator of constitutive androstane receptor (CAR)/pregnane X receptor (PXR). A fit-for-purpose read-across approach was integrated with hierarchical clustering - an unsupervised machine learning algorithm, to bridge the knowledge gap. The integration allowed the incorporation of a broad spectrum of attributes for analog consideration, and enabled the analog selection in a simple, reproducible, and objective manner. The applicability was evaluated and demonstrated using penconazole (source) and three pseudo-unknown target chemicals (epoxiconazole, tebuconazole and triadimefon). Applying this machine learning-enhanced read-across approach, difenoconazole was selected as the most appropriate analog for propiconazole. A mouse PBK model was developed and evaluated for difenoconazole (source), with the mode of action of CAR/PXR activation incorporated to simulate the in vivo autoinduction of metabolism. The difenoconazole mouse model then served as a template for constructing the propiconazole mouse model. A parallelogram approach was subsequently applied to develop the propiconazole rat and human models, enabling a quantitative assessment of interspecies differences in dosimetry. This integrated approach represents a substantial advancement toward refining risk assessment of propiconazole within the framework of animal alternative safety assessment strategies.

The impact of surface functionalization of cellulose following simulated digestion and gastrointestinal cell-based model exposure.

Surface-functionalized cellulose materials are developed for various purposes, including food additives and food contact materials. A new biologically relevant testing strategy has been developed based on guidance from the European Food Safety Authority to demonstrate the safety of several next-generation surface-functionalized cellulose materials. This strategy involves a complex three-stage simulated digestion to compare the health effects of thirteen novel different types of cellulose. The physical and chemical properties of surface-functionalized fibrillated celluloses differed depending on the type, amount, and location of functional groups such as sulfonate, TEMPO-oxidized carboxy, and periodate-chlorite oxidized dicarboxylic acid celluloses. Despite exposure to gastrointestinal fluids, the celluloses maintained their physicochemical properties, such as negative surface charges and high length-to-width/thickness aspect ratios. An established intestinal co-culture model was used to measure cytotoxicity, barrier integrity, oxidative stress, and pro-inflammatory response to create a toxicological profile for these unique materials. We conclude that the C6 carboxylated cellulose nanofibrils by TEMPO-oxidation induced the most toxicity in the biological model used in this study and that the observed effects were most prominent at the 4-hour post-exposure time point.

Prioritizing of potential environmental exposure carcinogens beyond IARC group 1-2B based on weight of evidence (WoE) approach.

Environmental exposures are the main cause of cancer, and their carcinogenicity has not been fully evaluated, identifying potential carcinogens that have not been evaluated is critical for safety. This study is the first to propose a weight of evidence (WoE) approach based on computational methods to prioritize potential carcinogens. Computational methods such as read across, structural alert, (Quantitative) structure-activity relationship and chemical-disease association were evaluated and integrated. Four different WoE approach was evaluated, compared to the best single method, the WoE-1 approach gained 0.21 and 0.39 improvement in the area under the receiver operating characteristic curve (AUC) and Matthew's correlation coefficient (MCC) value, respectively. The evaluation of 681 environmental exposures beyond IARC list 1-2B prioritized 52 chemicals of high carcinogenic concern, of which 21 compounds were known carcinogens or suspected carcinogens, and eight compounds were identified as potential carcinogens for the first time. This study illustrated that the WoE approach can effectively complement different computational methods, and can be used to prioritize chemicals of carcinogenic concern.

The VERA software: Implementation of the acute fish toxicity endpoint and its application to pharmaceutical compounds.

The Virtual Extensive Read-Across software (VERA) is a new tool for read-across using a global similarity score, molecular groups, and structural alerts to find clusters of similar substances; these clusters are then used to identify suitable similar substances and make an assessment for the target substance. A beta version of VERA GUI is free and available at vegahub.eu; the source code of the VERA algorithm is available on GitHub. In the past we described its use to assess carcinogenicity, a classification endpoint. The aim here is to extend the automated read-across approach to assess continuous endpoints as well. We addressed acute fish toxicity. VERA evaluation on the acute fish toxicity endpoint was done on a dataset containing general substances (pesticides, industrial products, biocides, etc.), obtaining an overall R2 of 0.68. We employed the VERA algorithm also on active pharmaceutical ingredients (APIs). We included a portion of the APIs in the training dataset to predict APIs, successfully achieving an overall R2 of 0.63. VERA evaluates the assessment's reliability, and we reached an R2 of 0.78 and Root Mean Square Error (RMSE) of 0.44 for predictions with high reliability.

The rat acute oral toxicity of trifluoromethyl compounds (TFMs): a computational toxicology study combining the 2D-QSTR, read-across and consensus modeling methods.

All areas of the modern society are affected by fluorine chemistry. In particular, fluorine plays an important role in medical, pharmaceutical and agrochemical sciences. Amongst various fluoro-organic compounds, trifluoromethyl (CF3) group is valuable in applications such as pharmaceuticals, agrochemicals and industrial chemicals. In the present study, following the strict OECD modelling principles, a quantitative structure-toxicity relationship (QSTR) modelling for the rat acute oral toxicity of trifluoromethyl compounds (TFMs) was established by genetic algorithm-multiple linear regression (GA-MLR) approach. All developed models were evaluated by various state-of-the-art validation metrics and the OECD principles. The best QSTR model included nine easily interpretable 2D molecular descriptors with clear physical and chemical significance. The mechanistic interpretation showed that the atom-type electro-topological state indices, molecular connectivity, ionization potential, lipophilicity and some autocorrelation coefficients are the main factors contributing to the acute oral toxicity of TFMs against rats. To validate that the selected 2D descriptors can effectively characterize the toxicity, we performed the chemical read-across analysis. We also compared the best QSTR model with public OPERA tool to demonstrate the reliability of the predictions. To further improve the prediction range of the QSTR model, we performed the consensus modelling. Finally, the optimum QSTR model was utilized to predict a true external set containing many untested/unknown TFMs for the first time. Overall, the developed model contributes to a more comprehensive safety assessment approach for novel CF3-containing pharmaceuticals or chemicals, reducing unnecessary chemical synthesis whilst saving the development cost of new drugs.

Prediction of acute toxicity for Chlorella vulgaris caused by tire wear particle-derived compounds using quantitative structure-activity relationship models.

Tire wear particles (TWPs) enter aquatic ecosystems through various pathways, such as rainwater and urban runoff. Additives in TWPs can harm aquatic organisms in these ecosystems. Therefore, it is essential to investigate their toxicity to aquatic organisms. In our study, we initially recorded the median effective concentrations of 21 TWP-derived compounds on Chlorella vulgaris growth, ranging from 0.04 to 8.60 mg/L. Subsequently, through an extensive review of the literature, we incorporated 112 compounds with specific toxicity endpoints to construct the QSAR model using genetic algorithm and multiple linear regression techniques, followed by the construction of the consensus model and the quantitative read-across structure-activity relationship (q-RASAR) model. Meanwhile, we employed rigorous internal and external validation measures to assess the performance of the model. The results indicated that the developed q-RASAR model exhibited strong adaptation, robustness, and reliable prediction, with q-RASAR indicators of Q2LOO = 0.7673, R2tr = 0.8079, R2test = 0.8610, Q2Fn = 0.8285-0.8614, and CCCtest = 0.9222. Based on an external dataset containing 128 emerging TWP-derived compounds, the model's applicability domain coverage was 90.6 %. The q-RASAR model predicted that the structure of diphenylamine was associated with higher toxicity, possibly liked to the SpMax2_Bhm and LogBCF descriptors. The established model reliably provides prediction and fills a critical data gap. These findings highlight the potential risks posed by emerging TWP-derived compounds to aquatic organisms.

Is read-across for chemicals comparable to medical device equivalence and where to use it for conformity assessment?

Novel medical devices must conform to medical device regulation (MDR) for European market entry. Likewise, chemicals must comply with the Registration, Evaluation, Authorization and Restriction of Chemicals (REACh) regulation. Both pose regulatory challenges for manufacturers, but concordantly provide an approach for transferring data from an already registered device or compound to the one undergoing accreditation. This is called equivalence for medical devices and read-across for chemicals. Although read-across is not explicitly prohibited in the process of medical device accreditation, it is usually not performed due to a lack of guidance and acceptance criteria from the authorities. Nonetheless, a scientifically justified read-across of material-based endpoints, as well as toxicological assessment of chemical aspects, such as extractables and leachables, can prevent failure of MDR device equivalence if data is lacking. Further, read-across, if applied correctly can facilitate the standard MDR conformity assessment. The need for read-across within medical device registration should let authorities to reconsider device accreditation and the formulation of respective guidance documents. Acceptance criteria like in the European Chemicals Agency (ECHA) read-across assessment framework (RAAF) are needed. This can reduce the impact of the MDR and help with keeping high European innovation device rate, beneficial for medical device patients.

Use of in vitro ADME methods to identify suitable analogs of homosalate and octisalate for use in a read-across safety assessment.

Case studies are needed to demonstrate the use of human-relevant New Approach Methodologies in cosmetics ingredient safety assessments. For read-across assessments, it is crucial to compare the target chemical with the most appropriate analog; therefore, reliable analog selection should consider physicochemical properties, bioavailability, metabolism, as well as the bioactivity of potential analogs. To complement in vitro bioactivity assays, we evaluated the suitability of three potential analogs for the UV filters, homosalate and octisalate, according to their in vitro ADME properties. We describe how technical aspects of conducting assays for these highly lipophilic chemicals were addressed and interpreted. There were several properties that were common to all five chemicals: they all had similar stability in gastrointestinal fluids (in which no hydrolysis to salicylic occurred); were not substrates of the P-glycoprotein efflux transporter; were highly protein bound; and were hydrolyzed to salicylic acid (which was also a major metabolite). The main properties differentiating the chemicals were their permeability in Caco-2 cells, plasma stability, clearance in hepatic models, and the extent of hydrolysis to salicylic acid. Cyclohexyl salicylate, octisalate, and homosalate were identified suitable analogs for each other, whereas butyloctyl salicylate exhibited ADME properties that were markedly different, indicating it is unsuitable. Isoamyl salicylate can be a suitable analog with interpretation for octisalate. In conclusion, in vitro ADME properties of five chemicals were measured and used to pair target and potential analogs. This study demonstrates the importance of robust ADME data for the selection of analogs in a read-across safety assessment.

Chronic aquatic toxicity assessment of diverse chemicals on Daphnia magna using QSAR and chemical read-across.

We have modeled here chronic Daphnia toxicity taking pNOEC (negative logarithm of no observed effect concentration in mM) and pEC50 (negative logarithm of half-maximal effective concentration in mM) as endpoints using QSAR and chemical read-across approaches. The QSAR models were developed by strictly obeying the OECD guidelines and were found to be reliable, predictive, accurate, and robust. From the selected features in the developed models, we have found that an increase in lipophilicity and saturation, the presence of electrophilic or electronegative or heavy atoms, the presence of sulphur, amine, and their related functionality, an increase in mean atomic polarizability, and higher number of (thio-) carbamates (aromatic) groups are responsible for chronic toxicity. Therefore, this information might be useful for the development of environmentally friendly and safer chemicals and data-gap filling as well as reducing the use of identified toxic chemicals which have chronic toxic effects on aquatic ecosystems. Approved classes of drugs from DrugBank databases and diverse groups of chemicals from the Chemical and Product Categories (CPDat) database were also assessed through the developed models.

First report on pesticide sub-chronic and chronic toxicities against dogs using QSAR and chemical read-across.

Excessive use of chemicals is the outcome of the industrialization of agricultural sectors which leads to disturbance of ecological balance. Various agrochemicals are widely used in agricultural fields, urban green areas, and to protect from various pest-associated diseases. Due to their long-term health and environmental hazards, chronic toxicity assessment is crucial. Since in vivo and in vitro toxicity assessments are costly, lengthy, and require a large number of animal experiments, in silico toxicity approaches are better alternatives to save time, cost, and animal experimentation. We have developed the first regression-based 2D-QSAR models using different sub-chronic and chronic toxicity data of pesticides against dogs employing 2D descriptors. From the statistical results (ntrain=53-62, r2 = 0.614 to 0.754, QLOO2 = 0.501 to 0.703 and QF12 = 0.531 to 0.718, QF22=0.523-0.713), it was concluded that the models are robust, reliable, interpretable, and predictive. Similarity-based read-across algorithm was also used to improve the predictivity (QF12=0.595-0.813,QF22=0.573-0.809) of the models. 5132 chemicals obtained from the CPDat and 1694 pesticides obtained from the PPDB database were also screened using the developed models, and their predictivity and reliability were checked. Thus, these models will be helpful for eco-toxicological data-gap filling, toxicity prediction of untested pesticides, and development of novel, safer & eco-friendly pesticides.

Application of machine learning-based read-across structure-property relationship (RASPR) as a new tool for predictive modelling: Prediction of power conversion efficiency (PCE) for selected classes of organic dyes in dye-sensitized solar cells (DSSCs).

The application of various in-silico-based approaches for the prediction of various properties of materials has been an effective alternative to experimental methods. Recently, the concepts of Quantitative structure-property relationship (QSPR) and read-across (RA) methods were merged to develop a new emerging chemoinformatic tool: read-across structure-property relationship (RASPR). The RASPR method can be applicable to both large and small datasets as it uses various similarity and error-based measures. It has also been observed that RASPR models tend to have an increased external predictivity compared to the corresponding QSPR models. In this study, we have modeled the power conversion efficiency (PCE) of organic dyes used in dye-sensitized solar cells (DSSCs) by using the quantitative RASPR (q-RASPR) method. We have used relatively larger classes of organic dyes-Phenothiazines (n=207), Porphyrins (n=281), and Triphenylamines (n=229) for the modelling purpose. We have divided each of the datasets into training and test sets in 3 different combinations, and with the training sets we have developed three different QSPR models with structural and physicochemical descriptors and validated them with the corresponding test sets. These corresponding modeled descriptors were used to calculate the RASPR descriptors using a Java-based tool RASAR Descriptor Calculator v2.0 (https://sites.google.com/jadavpuruniversity.in/dtc-lab-software/home), and then data fusion was performed by pooling the previously selected structural and physicochemical descriptors with the calculated RASPR descriptors. Further feature selection algorithm was employed to develop the final RASPR PLS models. Here, we also developed different machine learning (ML) models with the descriptors selected in the QSPR PLS and RASPR PLS models, and it was found that models with RASPR descriptors superseded in external predictivity the models with only structural and physicochemical descriptors: RMSEP reduced for phenothiazines from 1.16-1.25 to 1.07-1.18, for porphyrins from 1.60-1.79 to 1.45-1.53, for triphenylamines from 1.27-1.54 to 1.20-1.47.

Prioritization of the ecotoxicological hazard of PAHs towards aquatic species spanning three trophic levels using 2D-QSTR, read-across and machine learning-driven modelling approaches.

Polycyclic aromatic hydrocarbons (PAHs) represent a common group of environmental pollutants that endanger various aquatic organisms via various pathways. To better prioritize the ecotoxicological hazard of PAHs to aquatic environment, we used 2D descriptors-based quantitative structure-toxicity relationship (QSTR) to assess the toxicity of PAHs toward six aquatic model organisms spanning three trophic levels. According to strict OECD guideline, six easily interpretable, transferable and reproducible 2D-QSTR models were constructed with high robustness and reliability. A mechanistic interpretation unveiled the key structural factors primarily responsible for controlling the aquatic ecotoxicity of PAHs. Furthermore, quantitative read-across and different machine learning approaches were employed to validate and optimize the modelling approach. Importantly, the optimum QSTR models were further applied for predicting the ecotoxicity of hundreds of untested/unknown PAHs gathered from Pesticide Properties Database (PPDB). Especially, we provided a priority list in terms of the toxicity of unknown PAHs to six aquatic species, along with the corresponding mechanistic interpretation. In summary, the models can serve as valuable tools for aquatic risk assessment and prioritization of untested or completely new PAHs chemicals, providing essential guidance for formulating regulatory policies.

Utility of in vivo metabolomics to support read-across for UVCB substances under REACH.

Structure-based grouping of chemicals for targeted testing and read-across is an efficient way to reduce resources and animal usage. For substances of unknown or variable composition, complex reaction products, or biological materials (UVCBs), structure-based grouping is virtually impossible. Biology-based approaches such as metabolomics could provide a solution. Here, 15 steam-cracked distillates, registered in the EU through the Lower Olefins Aromatics Reach Consortium (LOA), as well as six of the major substance constituents, were tested in a 14-day rat oral gavage study, in line with the fundamental elements of the OECD 407 guideline, in combination with plasma metabolomics. Beyond signs of clinical toxicity, reduced body weight (gain), and food consumption, pathological investigations demonstrated the liver, thyroid, kidneys (males only), and hematological system to be the target organs. These targets were confirmed by metabolome pattern recognition, with no additional targets being identified. While classical toxicological parameters did not allow for a clear distinction between the substances, univariate and multivariate statistical analysis of the respective metabolomes allowed for the identification of several subclusters of biologically most similar substances. These groups were partly associated with the dominant (> 50%) constituents of these UVCBs, i.e., indene and dicyclopentadiene. Despite minor differences in clustering results based on the two statistical analyses, a proposal can be made for the grouping of these UVCBs. Both analyses correctly clustered the chemically most similar compounds, increasing the confidence that this biological approach may provide a solution for the grouping of UVCBs.

Development of an in silico evaluation system that quantitatively predicts skin sensitization using OECD Guideline No. 497 ITSv2 defined approach for skin sensitization classification.

The Integrated Testing Strategy version 2 (ITSv2) Defined Approach, which is a reliable skin sensitization hazard and multi-step risk assessment method, does not support quantitative risk assessment such as local lymph node assay EC3 values. In this study, we developed a high-performance in silico evaluation system that quantitatively predicts the EC3 values of chemical substances by combining the ITSv2 Defined Approach for hazard identification (ITSv2 HI) with machine learning models. This system uses in chemico/in vitro test data, molecular descriptors, and distance information based on read-across concepts as explanatory variables. The system achieves an R2 value of 0.617 on external-validation data. Substances misclassified in ITSv2 HI are considered to have properties that do not match the correspondence between tests expressing the adverse outcome pathway assumed in the ITSv2 Defined Approach and skin sensitization. Therefore, ITSv2 HI is assumed to be correct within the applicability domains of this system. When using only substances within the applicability domains to reconstruct CatBoost models, the R2 value reached 0.824 on the external-validation data, representing an improvement in system performance. The results demonstrate the utility of explanatory variables that reflect the read-across concept and the advantages of integrating multiple prediction methods.