Homogeneous to heterogeneous redox mediator enhancing ferrate(VI) oxidation of sulfamethoxazole: Role of ferrate(VI) activation and electron shuttle.

Ferrate (Fe(VI)) is a promising oxidant for water remediation, yet it has limited reactivity towards certain recalcitrant but important emerging contaminants, such as sulfamethoxazole. Here, this study demonstrates that nitroxide redox mediators, specifically 9-azabicyclo[3.3.1]nonasne N-oxyl (ABNO), can catalyze Fe(VI) reaction with sulfamethoxazole by functioning both as Fe(VI) activator and electron shuttle. The underlying mechanism is explained as: (i) Fe(VI) activation: a series of one-electron transfers between Fe(VI) and ABNO produces highly reactive Fe(V)/Fe(IV) and ABNO+; (ii) electron shuttle: the newly formed active ABNO+ reacts with the sulfamethoxazole, contributing to its removal. Concurrently, ABNOH is generated and subsequently converted back to ABNO by reactive species, thereby completing the redox cycle. The as-developed heterogeneous redox mediator, ABNO@SiO2, retained its catalytic properties and effectively catalyzed Fe(VI) to remove sulfamethoxazole at environmentally relevant pH levels.

Oxidation of Ammonia Catalyzed by a Molecular Iron Complex: Translating Chemical Catalysis to Mediated Electrocatalysis.

Ammonia is a promising candidate in the quest for sustainable, clean energy. With its capacity to serve as an energy carrier, the oxidation of ammonia opens avenues for carbon-neutral approaches to address worldwide growing energy needs. We report the catalytic chemical oxidation of ammonia by an Earth-abundant transition metal complex, trans-[LFeII(MeCN)2][PF6]2, where L is a macrocyclic ligand bearing four N-heterocyclic carbene (NHC) donors. Using triarylaminium radical cations in MeCN, up to 182 turnovers of N2 per Fe were obtained from chemical catalysis with an extremely low loading of the Fe catalyst (0.043 mM, 0.004 mol % catalyst). This chemical catalysis was successfully transitioned to mediated electrocatalysis for the oxidation of ammonia. Molecular electrocatalysis by the Fe catalyst and the mediator (p-MeOC6H4)3N exhibited a catalytic half-wave potential (Ecat/2) of 0.18 V vs [Cp2Fe]+/0 in MeCN, and achieved 9.3 turnovers of N2 at an applied potential of 0.20 V vs [Cp2Fe]+/0 at -20 °C in controlled-potential electrolysis, with a Faradaic efficiency of 75%. Based on computational results, the catalyst undergoes sequential oxidation and deprotonation steps to form [LFeIV(NH2)2]2+, and thereafter bimetallic coupling to form an N-N bond.

Bifunctional Chiral Electrocatalysts Enable Enantioselective α-Alkylation of Aldehydes.

Herein, we describe an innovative approach to the asymmetric electrochemical α-alkylation of aldehydes facilitated by a newly designed bifunctional chiral electrocatalyst. The highly efficient bifunctional chiral electrocatalyst combines a chiral aminocatalyst with a redox mediator. It plays a dual role as a redox mediator for electrooxidation, while simultaneously providing remarkable asymmetric induction for the stereoselective α-alkylation of aldehydes. Additionally, this novel catalyst exhibits enhanced catalytic activity and excellent stereoselective control comparable to conventional catalytic systems. As a result, this strategy provides a new avenue for versatile asymmetric electrochemistry. The electrooxidation of diverse phenols enables the C-H/C-H oxidative α-alkylation of aldehydes in a highly chemo- and stereoselective fashion. Detailed mechanistic studies by control experiments and cyclic voltammetry analysis demonstrate possible reaction pathways and the origin of enantio-induction.

A MOF-Gel Based Separator for Suppressing Redox Mediator Shuttling in Li-O2 Batteries.

Redox mediators (RMs) are widely utilized in the electrolytes of Li-O2 batteries to catalyze the formation/decomposition of Li2O2, which significantly enhances the cycling performance and reduces the charge overpotential. However, RMs have a shuttle effect by migrating to the Li anode side and inducing Li metal degradation through a parasitic reaction. Herein, a metal-organic framework gel (MOF-gel) separator is proposed to restrain the shuttling of RMs. Compared to traditional MOF nanoparticles, MOF gels form uniform and dense films on the separators. When using Ru(acac)3 (ruthenium acetylacetonate) as an RM, the MOF-gel separator suppresses the shuttling of Ru(acac)3 toward the Li anode side and significantly enhances the performance of Li-O2 batteries. Specifically, Li-O2 batteries exhibit an ultralong cycling life (410 cycles) at a current density of 0.5 A g-1. Moreover, the batteries using the MOF-gel/celgard separator exhibit significantly improved cycling performance (increase by ≈1.6 times) at a high current density of 1.0 A g-1 and a decreased charge/discharge overpotential. This result is expected to guide future development of battery separators and the exploration of redox mediators.

Plasma-induced, N-doped, and reduced graphene oxide-incorporated NiCo-layered double hydroxide nanowires as a high-capacity redox mediator for sustainable decoupled water electrolysis.

Although the recent emergence of decoupled water electrolysis prevents typical H2/O2 mixing, the further development of decoupled water electrolysis has been confined by the lack of reliable redox mediator (RM) electrodes to support sustainable H2 production. As energy storage electrodes, layered double hydroxides (LDHs) possess inherently poor conductivity/stability, which can be improved by growing LDHs on graphene substrates in situ. The proper modification of the graphene surface structure can improve the electron transport and energy storage capacity of composite electrodes, while current methods are usually cumbersome and require high temperatures/chemical reagents. Therefore, in this study, dip coating was adopted to grow graphene oxide (GO) on nickel foam (NF). Then, the GO was reduced using nonthermal plasma (NTP) to reduced GO (rGO) in situ while simultaneously implementing N doping to obtain plasma-assisted N-doped rGO on NF (PNrGO/NF). The uniform conductive substrate ensured the subsequent growth of less-aggregated NiCo-LDH nanowires, which improved the conductivity and energy storage capacity (5.93 C/cm2 at 5 mA/cm2) of the NiCo-LDH@PNrGO/NF. For the decoupled system, the composite RM electrode exhibited a high buffering capacity for 1300 s during the decoupled H2/O2 evolution, and in the conventional coupled system, the necessary input voltage of 1.67 V was separated into two lower ones, 1.42/0.33 V for H2/O2 evolutions, respectively. Simultaneously, the RM possessed outstanding redox reversibility and structural stability during long-term cycling. This work could offer a feasible strategy for using NTP to synthesize excellent RM electrodes for application to decoupled water electrolysis.

Effects of Central Metal Ion on Binuclear Metal Phthalocyanine-Based Redox Mediator for Lithium Carbonate Decomposition.

Li2CO3 is the most tenacious parasitic solid-state product in lithium-air batteries (LABs). Developing suitable redox mediators (RMs) is an efficient way to address the Li2CO3 issue, but only a few RMs have been investigated to date, and their mechanism of action also remains elusive. Herein, we investigate the effects of the central metal ion in binuclear metal phthalocyanines on the catalysis of Li2CO3 decomposition, namely binuclear cobalt phthalocyanine (bi-CoPc) and binuclear cobalt manganese phthalocyanine (bi-CoMnPc). Density functional theory (DFT) calculations indicate that the key intermediate peroxydicarbonate (*C2O62-) is stabilized by bi-CoPc2+ and bi-CoMnPc3+, which is accountable for their excellent catalytic effects. With one central metal ion substituted by manganese for cobalt, the bi-CoMnPc's second active redox couple shifts from the second Co(II)/Co(III) couple in the central metal ion to the Pc(-2)/Pc(-1) couple in the phthalocyanine ring. In artificial dry air (N2-O2, 78:22, v/v), the LAB cell with bi-CoMnPc in electrolyte exhibited 261 cycles under a fixed capacity of 500 mAh g-1carbon and current density of 100 mA g-1carbon, significantly better than the RM-free cell (62 cycles) and the cell with bi-CoPc (193 cycles).

Overlooked interaction between redox-mediator and bisphenol-A in permanganate oxidation.

Research efforts on permanganate (Mn(VII)) combined with redox-mediator (RM), have received increasing attention due to their significant performance for bisphenol-A (BPA) removal. However, the mechanisms underpinning BPA degradation remain underexplored. Here we show the overlooked interactions between RM and BPA during permanganate oxidation by introducing an RM-N-hydroxyphthalimide (NHPI). We discovered that the concurrent generation of MnO2 and phthalimide-N-oxyl (PINO) radical significantly enhances BPA oxidation within the pH range of 5.0-6.0. The detection of radical cross-coupling products between PINO radicals and BPA or its derivatives corroborates the pivotal role of radical cross-coupling in BPA oxidation. Intriguingly, we observed the formation of an NHPI-BPA complex, which undergoes preferential oxidation by Mn(VII), marked by the emergence of an electron-rich domain in NHPI. These findings unveil the underlying mechanisms in the Mn(VII)/RM system and bridge the knowledge gap concerning BPA transformation via complexation. This research paves the way for further exploration into optimizing complexation sites and RM dosage, significantly enhancing the system's efficiency in water treatment applications.

Engineering FeOOH/Fe2O3@Carbon Interfaces With Biomass-Derived Carbon Nanodot/Iron Colloids for Efficient Redox-Modulated Dopamine Voltammetric Detection.

The Fe2+/Fe3+ redox couple is effective for voltammetric detection of trace dopamine (DA). However, achieving adequate concentrations with high electroactive surface area (ECSA), DA affinity, and fast interfacial charge transfer is challenging. Consequently, most reported Fe-based sensors have a high nanomolar range detection limit (LOD). Herein, we address these limitations by manipulating the phase and morphology of FeOOH/Fe2O3 heterojunctions anchored on sp2-carbon. FeOOH/Fe2O3 is synthesized by variable temperature aging of unique Fe5H9O15/Fe2O3@sp2-carbon colloidal nanoparticles, which form via chelation between biomass-derived carbon nanodots (CNDs) and Fe2+ ions. At 27 °C and 120 °C, Fe5H9O15/Fe2O3@sp2-carbon transforms into ß-FeOOH/Fe2O3 nanoparticles and α-FeOOH/Fe2O3 nanosheet, respectively. The ß-FeOOH/Fe2O3 interface exhibits higher eg orbital electron occupancy than α-FeOOH/Fe2O3, thereby facilitating oxygen adsorption and the generation of Fe2+/Fe3+ sites near the polarization potential of DA. This facilitates interfacial electron transfer between Fe3+ and DA. Moreover, its nanoparticle morphology enhances ECSA and DA adsorption compared to α-FeOOH/Fe2O3 nanosheets. With a LOD of ~3.11 nM, ß-FeOOH/Fe2O3 surpasses the lower threshold in humans (~10 nM) and matches noble-metal sensors. Furthermore, it exhibits selective detection of DA over 10 biochemicals in urine. Therefore, the ß-FeOOH/Fe2O3@sp2-C platform holds promise as a low-cost, easy-to-synthesize, and practical voltammetric DA monitor.

Elucidation of Design Criteria for V-based Redox Mediators: Structure-Function Relationships that Dictate Rates of Heterogeneous Electron Transfer.

Redox mediators are attractive solutions for addressing the stringent kinetic stipulations required for efficient energy conversion processes. In this work, we compare the electrochemical properties of four vanadium complexes, namely [V(acac)3], [V6O7(OMe)12], [nBu4N]3[V6O13(TRISNO2)2], and [nBu4N]5[V18O46(NO3)] in non-aqueous solutions on glassy carbon electrodes. The goal of this study is to investigate the electron transfer kinetics and diffusivity of these compounds under identical experimental conditions to develop an understanding of structure-function relationships that dictate the physicochemical properties of vanadium oxide assemblies. Complex selection was dictated by two criteria - (1) nuclearity of the transition metal complexes (2) distribution of electron density in the native electronic configuration. Our analyses establish that electronic communication between metal centers significantly impacts charge transfer kinetics of these vanadium-based compounds.

TEMPO/O2 Synergistically Mediated BiBrO-Photocatalyzed Decarboxylative Phosphorylation of N-Arylglycines.

With both TEMPO and O2 (in air) as the homogeneous redox mediators, BiBrO as the heterogeneous semiconductor photocatalyst, the first example of semi-heterogeneous photocatalytic decarboxylative phosphorylation of N-arylglycines with diarylphosphine oxides was established. A series of α-amino phosphinoxides were efficiently synthesized.

Single-Atom Iron Catalyst as an Advanced Redox Mediator for Anodic Oxidation of Organic Electrosynthesis.

Homogeneous electrocatalysts can indirect oxidate the high overpotential substrates through single-electron transfer on the electrode surface, enabling efficient operation of organic electrosynthesis catalytic cycles. However, the problems of this chemistry still exist such as high dosage, difficult recovery, and low catalytic efficiency. Single-atom catalysts (SACs) exhibit high atom utilization and excellent catalytic activity, hold great promise in addressing the limitations of homogeneous catalysts. In view of this, we have employed Fe-SA@NC as an advanced redox mediator to try to change this situation. Fe-SA@NC was synthesized using an encapsulation-pyrolysis method, and it demonstrated remarkable performance as a redox mediator in a range of reported organic electrosynthesis reactions, and enabling the construction of various C-C/C-X bonds. Moreover, Fe-SA@NC demonstrated a great potential in exploring new synthetic method for organic electrosynthesis. We employed it to develop a new electro-oxidative ring-opening transformation of cyclopropyl amides. In this new reaction system, Fe-SA@NC showed good tolerance to drug molecules with complex structures, as well as enabling flow electrochemical syntheses and gram-scale transformations. This work highlights the great potential of SACs in organic electrosynthesis, thereby opening a new avenue in synthetic chemistry.

Effects of Ti3C2Tx MXene Addition to a Co Complex/Ionic Liquid-Based Electrolyte on the Photovoltaic Performance of Solar Cells.

Redox mediators comprising I-, Co3+, and Ti3C2Tx MXene were applied to dye-sensitized solar cells (DSCs). In the as-prepared DSCs (I-DSCs), wherein hole conduction occurred via the redox reaction of I-/I3- ions, the power conversion efficiency (PCE) was not altered by the addition of Ti3C2Tx MXene. The I-DSCs were exposed to light to produce Co2+/Co3+-based cells (Co-DSCs), wherein the holes were transferred via the redox reaction of Co2+/Co3+ ions. A PCE of 9.01% was achieved in a Co-DSC with Ti3C2Tx MXene (Ti3C2Tx-Co-DSC), which indicated an improvement from the PCE of a bare Co-DSC without Ti3C2Tx MXene (7.27%). It was also found that the presence of Ti3C2Tx MXene in the redox mediator increased the hole collection, dye regeneration, and electron injection efficiencies of the Ti3C2Tx-Co-DSC, leading to an improvement in both the short-circuit current and the PCE when compared with those of the bare Co-DSC without MXene.

Recent Progress in Modular Electrochemical Synthesis of Hydrogen and High-Value-added Chemicals based on Solid Redox Mediator.

Electrochemical synthesis of H2 and high-value-added chemicals is an efficient and cost-effective approach that can be powered using renewable electricity. Compared to a conventional electrochemical production system, the modular electrochemical production system (MEPS) based on a solid redox mediator (SRM) can separate the anodic and cathodic reactions in time and space. The MEPS can avoid the use of membranes and formation of useless products, as well as eliminate the mutual dependence of production rates at anode and cathode. The SRM can temporarily store or release electrons and ions to pair with cathodic and anodic reactions, respectively, in MEPS. Designing of SRMs with large charge capacity and good cyclability is of great significance for constructing a high-performance MEPS. This work summarizes the design principles, recent advances in MEPS based on SRM, and application in redox flow cells. Moreover, structure design strategies as well as in situ characterization techniques and theoretical calculations for SRM is also proposed. It is expected to promote the vigorous development of MEPS based on SRM. Finally, the challenges and perspectives of MEPS based on SRM are discussed.

Harnessing the potential of ginkgo biloba extract: Boosting denitrification performance through accelerated electron transfer.

Ginkgo biloba extract (GBE) had several effects on the human body as one of the widely used phytopharmaceuticals, but it had no application in microbial enhancement in the environmental field. The study focused on the impact of GBE on denitrification specifically under neutral conditions. At the identified optimal addition ratio of 2% (v/v), the system exhibited a noteworthy increase in nitrate reduction rate (NRR) by 56.34%, elevating from 0.71 to 1.11 mg-N/(L·h). Moreover, the extraction of microbial extracellular polymeric substance (EPS) at this ratio revealed changes in the composition of EPS, the electron exchange capacity (EEC) was enhanced from 87.16 to 140.4 µmol/(g C), and the transfer impedance was reduced within the EPS. The flavin, fulvic acid (FA), and humic acid (HA) provided a π-electron conjugated structure for the denitrification system, enhancing extracellular electron transfer (EET) by stimulating carbon source metabolism. GBE also improved electron transfer system activity (ETSA) from 0.025 to 0.071 µL O2/(g·min·prot) and the content of NADH enhanced by 22.90% while significantly reducing the activation energy (Ea) by 85.6% in the denitrification process. The synergy of improving both intracellular and extracellular electron transfer, along with the reduction of Ea, notably amplified the initiation and reduction rates of the denitrification process. Additionally, GBE demonstrated suitability for denitrification across various pH levels, enhancing microbial resilience in alkaline conditions and promoting survival and proliferation. Overall, these findings open the door to potential applications of GBE as a natural additive in the environmental field to improve the efficiency of denitrification processes, which are essential for nitrogen removal in various environmental contexts.

1-D Carbon Nano-Coils Derived from Almond Skin: Exhibiting Density of State, Diffusivity, Electron Transfer Rate, and Dopamine Redox Modulation Properties Akin to Graphene Oxide.

The quest to develop graphene-like biomass-carbon for advanced biomolecule redox modulation and sensing remains a challenge. The primary obstacle is the limited ability of biomass to undergo extensive graphitization during pyrolysis resulting in the formation of amorphous carbon materials with a small carbon-double-bond-carbon domain size (Lsp2), density of state (LDOS), ion diffusivity (D), and electron transfer rate constant (Ks). Herein, using almond skin (AS) the morphology of biomass is demonstrated as the key to overcoming these limitations. AS consists of 1D syringyl/guaiacyl lignin nano-coils which under H2/H2 annealing transform into pyrolytic 1D carbon nano-coils (r-gC). Spectroscopy and microscopy analyses reveal that the sheet layering structure, crystallinity, LDOS, and Lsp2 of r-gC mimic those of graphene oxide (GO). Moreover, its unique 1D morphology and profound microstructure facilitate faster charge transfer and ion diffusion than GO's planar structure, leading to better redox modulation and sensing of the neurotransmitter dopamine (DA) in physiological fluids. r-gC's DA detection limit of 3.62 nM is below the lower threshold found in humans and on par with the state-of-the-art. r-gC is also DA-selective over 14 biochemicals. This study reveals that biomasses with well-defined and compact lignin structures are best suited for developing highly electroactive graphene-like biomass carbon.

Atomic-Scale Cryo-TEM Studies of the Electrochemistry of Redox Mediator in Li-O2 Batteries.

Rechargeable aprotic lithium (Li)-oxygen battery (LOB) is a potential next-generation energy storage technology because of its high theoretical specific energy. However, the role of redox mediator on the oxide electrochemistry remains unclear. This is partly due to the intrinsic complexity of the battery chemistry and the lack of in-depth studies of oxygen electrodes at the atomic level by reliable techniques. Herein, cryo-transmission electron microscopy (cryo-TEM) is used to study how the redox mediator LiI affects the oxygen electrochemistry in LOBs. It is revealed that with or without LiI in the electrolyte, the discharge products are plate-like LiOH or toroidal Li2O2, respectively. The I2 assists the decomposition of LiOH via the formation of LiIO3 in the charge process. In addition, a LiI protective layer is formed on the Li anode surface by the shuttle of I3 -, which inhibits the parasitic Li/electrolyte reaction and improves the cycle performance of the LOBs. The LOBs returned to 2e- oxygen reduction reaction (ORR) to produce Li2O2 after the LiI in the electrolyte is consumed. This work provides new insight on the role of redox mediator on the complex electrochemistry in LOBs which may aid the design LOBs for practical applications.

2-Hydroxy-1,4-Naphthoquinone: A Promising Redox Mediator for Minimizing Dissolved Organic Nitrogen and Eutrophication Effects of Wastewater Effluent.

Researchers and engineers are committed to finding effective approaches to reduce dissolved organic nitrogen (DON) to meet more stringent effluent total nitrogen limits and minimize effluent eutrophication potential. Here, we provided a promising approach by adding specific doses of 2-hydroxy-1,4-naphthoquinone (HNQ) to postdenitrification bioreactors. This approach of adding a small dosage of 0.03-0.1 mM HNQ effectively reduced the concentrations of DON in the effluent (ANOVA, p < 0.05) by up to 63% reduction of effluent DON with a dosing of 0.1 mM HNQ when compared to the control bioreactors. Notably, an algal bioassay indicated that DON played a dominant role in stimulating phytoplankton growth, thus effluent eutrophication potential in bioreactors using 0.1 mM HNQ dramatically decreased compared to that in control bioreactors. The microbe-DON correlation analysis showed that HNQ dosing modified the microbial community composition to both weaken the production and promote the uptake of labile DON, thus minimizing the effluent DON concentration. The toxic assessment demonstrated the ecological safety of the effluent from the bioreactors using the strategy of HNQ addition. Overall, HNQ is a promising redox mediator to reduce the effluent DON concentration with the purpose of meeting low effluent total nitrogen levels and remarkably minimizing effluent eutrophication effects.

Recent Advances in Hybrid Seawater Electrolysis for Hydrogen Production.

Seawater electrolysis (SWE) is a promising and potentially cost-effective approach to hydrogen production, considering that seawater is vastly abundant and SWE is able to combine with offshore renewables producing green hydrogen. However, SWE has long been suffering from technical challenges including the high energy demand and interference of chlorine chemistry, leading electrolyzers to a low efficiency and short lifespan. In this context, hybrid SWE, operated by replacing the energy-demanding oxygen evolution reaction and interfering chlorine evolution reaction (CER) with a thermodynamically more favorable anodic oxidation reaction (AOR) or by designing innovative electrolyzer cells, has recently emerged as a better alternative, which not only allows SWE to occur in a safe and energy-saving manner without the notorious CER, but also enables co-production of value-added chemicals or elimination of environmental pollutants. This review provides a first account of recent advances in hybrid SWE for hydrogen production. The substitutional AOR of various small molecules or redox mediators, in couple with hydrogen evolution from seawater, is comprehensively summarized. Moreover, how the electrolyzer cell design helps in hybrid SWE is briefly discussed. Last, the current challenges and future outlook about the development of the hybrid SWE technology are outlined.

NADH-based kinetic model for acetone-butanol-ethanol production by Clostridium.

We present in this work a kinetic model of the acetone-butanol-ethanol (ABE) fermentation based on enzyme kinetics expressions. The model includes the effect of the co-substrate NADH as a modulating factor of cellular metabolism. The simulations obtained with the model showed an adequate fit to the experimental data reported by several authors, matching or improving the results observed with previous models. In addition, this model does not require artificial mathematical strategies such as on-off functions to achieve a satisfactory fit of the ABE fermentation dynamics. The parametric sensitivity allowed to identify the direct glucose → acetyl-CoA → butyryl-CoA pathway as being more significant for butanol production than the acid re-assimilation pathway. Likewise, model simulations showed that the increase in NADH, due to glucose concentration, favors butanol production and selectivity, finding a maximum selectivity of 3.6, at NADH concentrations above 55 mM and glucose concentration of 126 mM. The introduction of NADH in the model would allow its use for the analysis of electrofermentation processes with Clostridium, since the model establishes a basis for representing changes in the intracellular redox potential from extracellular variables.

The Renaissance of Ferrocene-Based Electrocatalysts: Properties, Synthesis Strategies, and Applications.

The fascinating electrochemical properties of the redox-active compound ferrocene have inspired researchers across the globe to develop ferrocene-based electrocatalysts for a wide variety of applications. Advantages including excellent chemical and thermal stability, solubility in organic solvents, a pair of stable redox states, rapid electron transfer, and nontoxic nature improve its utility in various electrochemical applications. The use of ferrocene-based electrocatalysts enables control over the intrinsic properties and electroactive sites at the surface of the electrode to achieve specific electrochemical activities. Ferrocene and its derivatives can function as a potential redox medium that promotes electron transfer rates, thereby enhancing the reaction kinetics and electrochemical responses of the device. The outstanding electrocatalytic activity of ferrocene-based compounds at lower operating potentials enhances the specificity and sensitivity of reactions and also amplifies the response signals. Owing to their versatile redox chemistry and catalytic activities, ferrocene-based electrocatalysts are widely employed in various energy-related systems, molecular machines, and agricultural, biological, medicinal, and sensing applications. This review highlights the importance of ferrocene-based electrocatalysts, with emphasis on their properties, synthesis strategies for obtaining different ferrocene-based compounds, and their electrochemical applications.