Effects of salinity and betaine addition on anaerobic granular sludge properties and microbial community succession patterns in organic saline wastewater.

In this study, the effects of different salinity gradients and addition of compatible solutes on anaerobic treated effluent water qualities, sludge characteristics and microbial communities were investigated. The increase in salinity resulted in a decrease in particle size of the granular sludge, which was concentrated in the range of 0.5-1.0 mm. The content of EPS (extracellular polymeric substances) in the granular sludge gradually increased with increasing salinity and the addition of betaine (a typical compatible solute). Meanwhile, the microbial community structure was significantly affected by salinity, with high salinity reducing the diversity of bacteria. At higher salinity, Patescibacteria and Proteobacteria gradually became the dominant phylum, with relative abundance increasing to 13.53% and 12.16% at 20 g/L salinity. Desulfobacterota and its subordinate Desulfovibrio, which secrete EPS in large quantities, dominated significantly after betaine addition.Their relative abundance reached 13.65% and 7.86% at phylum level and genus level. The effect of these changes on the treated effluent was shown as the average chemical oxygen demand (COD) removal rate decreased from 82.10% to 79.71%, 78.01%, 68.51% and 64.55% when the salinity gradually increased from 2 g/L to 6, 10, 16 and 20 g/L. At the salinity of 20 g/L, average COD removal increased to 71.65% by the addition of 2 mmol/L betaine. The gradient elevated salinity and the exogenous addition of betaine played an important role in achieving stability of the anaerobic system in a highly saline environment, which provided a feasible strategy for anaerobic treatment of organic saline wastewater.

Optimization of a Novel Engineered Ecosystem Integrating Carbon, Nitrogen, Phosphorus, and Sulfur Biotransformation for Saline Wastewater Treatment Using an Interpretable Machine Learning Approach.

The denitrifying sulfur (S) conversion-associated enhanced biological phosphorus removal (DS-EBPR) process for treating saline wastewater is characterized by its unique microbial ecology that integrates carbon (C), nitrogen (N), phosphorus (P), and S biotransformation. However, operational instability arises due to the numerous parameters and intricates bacterial interactions. This study introduces a two-stage interpretable machine learning approach to predict S conversion-driven P removal efficiency and optimize DS-EBPR process. Stage one utilized the XGBoost regression model, achieving an R2 value of 0.948 for predicting sulfate reduction (SR) intensity from anaerobic parameters with feature engineering. Stage two involved the CatBoost classification and regression model integrating anoxic parameters with the predicted SR values for predicting P removal, reaching an accuracy of 94% and an R2 value of 0.93, respectively. This study identified key environmental factors, including SR intensity (20-45 mg S/L), influent P concentration (<9.0 mg P/L), mixed liquor volatile suspended solids (MLVSS)/mixed liquor suspended solids (MLSS) ratio (0.55-0.72), influent C/S ratio (0.5-1.0), anoxic reaction time (5-6 h), and MLSS concentration (>6.50 g/L). A user-friendly graphic interface was developed to facilitate easier optimization and control. This approach streamlines the determination of optimal conditions for enhancing P removal in the DS-EBPR process.

Novel insights into the biological state in algal-bacterial granular sludge granulation: Armor-like protection provided by the algal barrier.

Algal-bacterial granular sludge (ABGS) composed of microalgae and aerobic granular sludge, is a sustainable and promising technology for wastewater treatment. However, the formation mechanism of ABGS has not been clearly defined, and the direct formation of ABGS in saline wastewater has rarely been investigated. This study proposed novel insights into the granulation process of ABGS by assembling the algal barrier, which was successfully cultivated directly in saline wastewater. The results concluded that ABGS with the algal barrier maintained a higher biomass (MLSS of 7046 ± 61 mg/L), larger particle sizes (1.21 ± 0.06 mm), and better settleability (SVI30 of 46 ± 1 mL/g), enabling efficient pollutants removal. Soluble microbial products (SMP) were found to be closely related to the emergence of the algal barrier. In addition, under salinity stress, the high production of extracellular polymeric substances (EPS, 133.70 ± 1.40 mg/g VSS), specifically TB-EPS (90.29 ± 1.12 mg/g VSS), maintained a crucial role in the formation of ABGS. Further analysis indicated that biofilm producing bacteria Pseudofulvimonas and filamentous eukaryote Streptophyta were the key players in ABGS formation with the algal barrier. Furthermore, the enhancement of key genes and enzymes involved in nitrogen metabolism, TCA cycle, and polysaccharide metabolism suggested a more robust protective effect provided by the algal barrier. This study is expected to advance the application of simultaneous ABGS formation and pollutant removal in wastewater.

Trace Br- Inhibits Halogenated Byproduct Formation in Saline Wastewater Electrochemical Treatment.

The electrochemical technology provides a practical and viable solution to the global water scarcity issue, but it has an inherent challenge of generating toxic halogenated byproducts in treatment of saline wastewater. Our study reveals an unexpected discovery: the presence of a trace amount of Br- not only enhanced the electrochemical oxidation of organic compounds with electron-rich groups but also significantly reduced the formation of halogenated byproducts. For example, in the presence of 20 µM Br-, the oxidation rate of phenol increased from 0.156 to 0.563 min-1, and the concentration of total organic halogen decreased from 59.2 to 8.6 µM. Through probe experiments, direct electron transfer and HO• were ruled out as major contributors; transient absorption spectroscopy (TAS) and computational kinetic models revealed that trace Br- triggers a shift in the dominant reactive species from Cl2•- to Br2•-, which plays a key role in pollutant removal. Both TAS and electron paramagnetic resonance identified signals unique to the phenoxyl and carbon-centered radicals in the Br2•--dominated system, indicating distinct reaction mechanisms compared to those involving Cl2•-. Kinetic isotope experiments and density functional theory calculations confirmed that the interaction between Br2•- and phenolic pollutants follows a hydrogen atom abstraction pathway, whereas Cl2•- predominantly engages pollutants through radical adduct formation. These insights significantly enhance our understanding of bromine radical-involved oxidation processes and have crucial implications for optimizing electrochemical treatment systems for saline wastewater.

Salt stimulates sulfide-driven autotrophic denitrification: Microbial network and metagenomics analyses.

Sulfur autotrophic denitrification (SADN) is a promising biological wastewater treatment technology for nitrogen removal, and its performance highly relies on the collective activities of the microbial community. However, the effect of salt (a prevailing characteristic of some nitrogen-containing industrial wastewaters) on the microbial community of SADN is still unclear. In this study, the response of the sulfide-SADN process to different salinities (i.e., 1.5 % salinity, 0.5 % salinity, and without salinity) as well as the involved microbial mechanisms were investigated by molecular ecological network and metagenomics analyses. Results showed that the satisfactory nitrogen removal efficiency (>97 %) was achieved in the sulfide-SADN process (S/N molar ratio of 0.88) with 1.5 % salinity. In salinity scenarios, the genus Thiobacillus significantly proliferated and was detected as the dominant sulfur-oxidizing bacteria in the sulfide-SADN system, occupying a relative abundance of 29.4 %. Network analysis further elucidated that 1.5 % salinity had enabled the microbial community to form a more densely clustered network, which intensified the interactions between microorganisms and effectively improved the nitrogen removal performance of the sulfide-SADN. Metagenomics sequencing revealed that the abundance of functional genes encoding for key enzymes involved in SADN, dissimilatory nitrate reduction to ammonium, and nitrification was up-regulated in the 1.5 % salinity scenario compared to that without salinity, stimulating the occurrence of multiple nitrogen transformation pathways. These multi-paths contributed to a robust SADN process (i.e., nitrogen removal efficiency >97 %, effluent nitrogen <2.5 mg N/L). This study deepens our understanding of the effect of salt on the SADN system at the community and functional level, and favors to advance the application of this sustainable bioprocess in saline wastewater treatment.

Enhanced nitrogen removal performance of nitrogen-rich saline wastewater by marine anammox bacteria: Based on different influent loading strengths.

In an anaerobic sequential batch reactor (SBR), marine anammox bacteria (MAB) were able to enhance microbial activity in nitrogen-rich saline wastewater and it was significantly affected by influent substrate composition and loading strength. This study therefore enhanced nitrogen removal efficiency by adjusting the influent nitrogen loading strength of MAB-inoculated anaerobic SBRs and assessed the correlation with the bacterial community. The results displayed that the system obtained optimal nitrogen removal efficiency (TN = 83.52%, NH4-N = 90.14%, and NO2-N = 83.57%) as the strength of influent nitrogen loading was increased to 201.35 mg L-1 for NH4-N and 266.42 mg L-1 for NO2-N. Moreover, the increase in the strength of influent nitrogen loading also enhanced the anammox 16S rRNA abundance (4.09 × 108 copies g-1) and ladderanes content (22.49 ng g-1dw). Analysis of 15N isotope further illustrated that all systems were dominated by anammox (average ra = 95.22%). In conclusion, these findings provide scientific guidance for the management of eutrophic seawater and contribute to the realization of industrial applications for the treatment of nitrogen-rich saline wastewater.

Combination of magnetic field and ultraviolet for fouling control in saline wastewater distribution systems.

Fouling is a significant challenge for recycling and reusing saline wastewaters for industrial, agricultural or municipal applications. In this study, we propose a novel approach of magnetic field (MaF) and ultraviolet (UV) combined application for fouling mitigation. Results showed, combination of MaF and UV (MaF-UV) significantly decreased the content of biofouling and reduced the complexity of microbial networks, compared to UV and MaF alone treatments. This was due to MaF as pretreatment effectively reduced the water turbidity, improve the influent water quality of UV disinfection and increases UV transmittance, eliminating the adverse impacts of UV scattering and shielding, hence increased the inactivation effectiveness of UV disinfection process. MaF assisted UV also reduced the abundance of UV-resistant bacteria and inhibited the risk of bacterial photoreactivation and dark repair. Meanwhile, MaF-UV drastically reduced the contents of precipitates and particulate fouling by accelerating the transformation rate of CaCO3 crystal from compact calcite to loosen hydrated amorphous CaCO3, and enhancing the flocculation process. These findings demonstrated that MaF-UV is an effective anti-fouling strategy, and provide insights for sustainable application of saline wastewaters.

Response of marine anammox bacteria to long-term hydroxylamine stress: Nitrogen removal performance and microbial community dynamics.

The response of anammox bacteria to hydroxylamine has not been well explained. Herein, hydroxylamine was long-term added as the sole substrate to marine anammox bacteria (MAB) in saline wastewater treatment for the first time. MAB could tolerate 5 mg/L hydroxylamine. However, MAB activity was inhibited by the high dose of hydroxylamine (40 mg/L), and hydroxylamine removal efficiency was only 3 %. Remarkably, when hydroxylamine reached 20 mg/L, ammonium was produced the most at 2.88 mg/L, mainly by the hydroxylamine and hydrazine disproportionations. Besides, the relative abundance of Candidatus Scalindua decreased from 4.6 % to 0.6 % as the hydroxylamine increased from 0 to 40 mg/L. MAB secreted more extracellular polymeric substances to resist hydroxylamine stress. However, long-term hydroxylamine loading led to the disintegration of MAB granules. This work shed light on the response of MAB to hydroxylamine in saline wastewater treatment.

Biological treatment processes for saline organic wastewater and related inhibition mechanisms and facilitation techniques: A comprehensive review.

Owing to its profound pollution-inducing properties and resistance to biodegradation, saline organic wastewater (SOW) has unavoidably emerged as a predominant focal point within the wastewater treatment domain. Substantial quantities of SOW are discharged by diverse industries encompassing food processing, pharmaceuticals, leather manufacturing, petrochemicals, and textiles. Within this review, the inhibitory repercussions of elevated salinity upon biological water treatment systems are subject to methodical scrutiny spanning from sludge characteristics, microbial consortia to the physiological functionality of microorganisms have been investigated. This exposition elucidates the application of both anaerobic and aerobic biological technologies for SOW treatment, which noting that conventional bioreactors can effectually treat SOW through microbial adaptation, and elaborating that cultivation of salt-tolerant bacteria and the design of advanced bioreactors represents a promising avenue for SOW treatment. Furthermore, the mechanisms underpinning microbial acclimatization to hypersaline milieus and the methodologies aimed at amplifying the efficacy of biological SOW treatment are delved into, which point out that microorganism exhibit salt tolerance via extracellular polymeric substance accumulation or by facilitating the influx of osmolarity-regulating agents into the bacterial matrix. Finally, the projections for future inquiry are proffered, encompassing the proliferation and deployment of high salt-tolerant strains, as well as the development of techniques enhancing the salt tolerance of microflora engaged in wastewater treatment.

Elucidated potential of immobilized Janibacter sp. for saline wastewater phenol removal.

Phenolic compounds are commonly found in industrial effluents and can be hazardous to organisms even at low concentrations. Over the years, researchers have demonstrated that bioremediation is a cost-effective and environmentally friendly alternative to physicochemical approaches used to remove phenol. The aim of this study was to investigate the removal of phenol from saline wastewaters by a halotolerant strain of the genus Janibacter. For this purpose, bacterial cells were immobilized on different supports, from which mica and zeolite were ultimately chosen due to their higher removal efficiency. The wet weight of immobilized cells per 1 g of mica and zeolite was 0.51 and 0.48 g, respectively. Free cells consumed 100 mg/L of phenol in 88 h, while immobilized cells used it in 40 h. Immobilized cells revealed a higher thermostability and could operate over a wider pH range and salinity. Unlike free cells, immobilized cells could remove 700 mg/L of phenol and could be reused for at least nine cycles. Interestingly the phenol removal efficiency of zeolite-immobilized cells remained unchanged after 4 months of storage at 4 and - 20 °C, which could be of great advantage for industrial applications. Complete destruction of phenol was observed through the meta pathway comprising phenol hydroxylase and catechol 2,3-dioxygenase enzymes. KEY POINTS: • Mica- and zeolite-immobilized cells were able to consume high concentrations of phenol. • Cells immobilized on mica and zeolite had considerable operational and storage stability. • Immobilized cells could be a good candidate for phenol removal in saline environments.

A review of microbial nitrogen transformations and microbiome engineering for biological nitrogen removal under salinity stress.

The osmotic stress caused by salinity exerts severe inhibition on the process of biological nitrogen removal (BNR), leading to the deterioration of biosystems and the discharge of nitrogen with saline wastewater. Feasible strategies to solve the bottleneck in saline wastewater treatment have attracted great attention, but relevant studies to improve nitrogen transformations and enhance the salt-tolerance of biosystems in terms of microbiome engineering have not been systematically reviewed and discussed. This work attempted to provide a more comprehensive explanation of both BNR and microbiome engineering approaches for saline wastewater treatment. The effect of salinity on conventional BNR pathways, nitrification-denitrification and anammox, was summarized at cellular and metabolic levels, including the nitrogen metabolic pathways, the functional microorganisms, and the inhibition threshold of salinity. Promising nitrogen transformations, such as heterotrophic nitrification-aerobic denitrification, ammonium assimilation and the coupling of conventional pathways, were introduced and compared based on advantages and challenges in detail. Strategies to improve the salt tolerance of biosystems were proposed and evaluated from the perspective of microbiome engineering. Finally, prospects of future investigation and applications on halophilic microbiomes in saline wastewater treatment were discussed.

Saline wastewater treatment by bioelectrochemical process (BEC) based on Al-electrocoagulation and halophilic bacteria: optimization using ANN with new approach.

ABSTRACTIn the present study, a bioelectrochemical reactor (BEC) was utilized to treat two types of real saline produced water (PW). BEC was designed based on the combination of electrocoagulation (EC) process with halophilic microorganisms, and it was assessed in terms of biodegradation of hydrocarbons. The effects of various operating parameters including the current density, electrical contact time (On/Off), hydraulic retention time (HRT), and total dissolved solids (TDS) at different levels on the chemical oxygen demand (COD) removal efficiency, settleability, and performance of isolated halophilic microorganisms were examined. Additionally, a novel neural network (ANN) approach modelling using adaptive factors was used to predict and optimize the effects and interactions between operating parameters during BEC process by predicting complicated mechanisms and variations associated with microorganisms. In addition, a new algorithm was developed for the sensitivity analysis to achieve the optimum operating conditions and obtain maximum efficiency in COD removal, sludge volume index (SVI), mixed liquor suspended solids (MLSS), and specific electrical energy consumption (SEEC), simultaneously. BEC was found to be significantly more effective at removing most hydrocarbons, particularly pristine and phytane. In addition, the results showed a significant improvement in settling ability of the biological flocs with average SVI of 91.5 mL/g and a size of 178.25 µm using BEC. Based on estimated operating costs and energy consumption, BEC was more cost-effective and efficient than other bioelectrochemical systems.

Mechanistic Insight for Disinfection Byproduct Formation Potential of Peracetic Acid and Performic Acid in Halide-Containing Water.

Peracetic acid (PAA) and performic acid (PFA) are two major peroxyacid (POA) oxidants of growing usage. This study reports the first systematic evaluation of PAA, PFA, and chlorine for their disinfection byproduct (DBP) formation potential in wastewater with or without high halide (i.e., bromide or iodide) concentrations. Compared with chlorine, DBP formation by PAA and PFA was minimal in regular wastewater. However, during 24 h disinfection of saline wastewater, PAA surprisingly produced more brominated and iodinated DBPs than chlorine, while PFA effectively kept all tested DBPs at bay. To understand these phenomena, a kinetic model was developed based on the literature and an additional kinetic investigation of POA decay and DBP (e.g., bromate, iodate, and iodophenol) generation in the POA/halide systems. The results show that PFA not only oxidizes halides 4-5 times faster than PAA to the corresponding HOBr or HOI but also efficiently oxidizes HOI/IO- to IO3-, thereby mitigating iodinated DBP formation. Additionally, PFA's rapid self-decay and slow release of H2O2 limit the HOBr level over the long-term oxidation in bromide-containing water. For saline water, this paper reveals the DBP formation potential of PAA and identifies PFA as an alternative to minimize DBPs. The new kinetic model is useful to optimize oxidant selection and elucidate involved DBP chemistry.

In-Depth Study on the Effects of Impurity Ions in Saline Wastewater Electrolysis.

Concentration followed by electrolysis is one of the most promising ways for saline wastewater treatment, since it could produce H2, Cl2, and an alkaline solution with deacidification potential. However, due to the diversity and difference of wastewater, knowledge on the suitable salt concentration for wastewater electrolysis and the effects of mixed ions are still lacking. In this work, electrolysis experiments of mixed saline water were conducted. The salt concentration for stable dechlorination was explored, with in-depth discussions on the effects of typical ions such as K+, Ca2+, Mg2+, and SO42-. Results showed that K+ had a positive effect on the H2/Cl2 production of saline wastewater through accelerating the mass transfer efficiency in the electrolyte. However, the existence of Ca2+ and Mg2+ had negative effects on the electrolysis performance by forming precipitates, which would adhere to the membrane, reduce the membrane permeability, occupy the active sites on the cathode surface, and also increase the transport resistance of the electrons in the electrolyte. Compared to Mg2+, the damaging effect of Ca2+ on the membrane was even worse. Additionally, the existence of SO42- reduced the current density of the salt solution by affecting the anodic reaction while having less of an effect on the membrane. Overall, Ca2+ ≤ 0.01 mol/L, Mg2+ ≤ 0.1 mol/L and SO42- ≤ 0.01 mol/L were allowable to ensure the continuous and stable dechlorination electrolysis of saline wastewater.

Static magnetic field increases aerobic nitrogen removal from hypersaline wastewater in activated sludge with coexistence of fungi and bacteria.

Fungi have been found to exist in activated sludge treating saline wastewater, but their role in removing pollution has been neglected. This study explored the aerobic removal of total inorganic nitrogen (TIN) from saline wastewater under static magnetic fields (SMFs) with several strengths. Compared to the control, the aerobic removal of TIN was significantly increased by 1.47 times in 50 mT SMF, due to the increased dissimilation nitrogen removal by fungi and bacteria. Under SMF, fungal nitrogen dissimilation removal was significantly increased by 3.65 times. The fungal population size decreased, and its community composition changed significantly under SMF. In contrast, bacterial community composition and population remained relatively stable. Under SMFs, heterotrophic nitrification - aerobic denitrification bacteria Paracoccus and the fungi denitrifying Candida formed a synergistic interaction. This study elucidates the fungal role in aerobic TIN removal and provides an efficient solution to improve TIN removal from saline wastewater by SMF.

Critical role of Photo-electrode with Ce-g-C3N4 in multi-stage microbial fuel cells cascade reactor treating diluted hyper-saline industrial wastewater rich in amines.

Treatment of chemical industrial wastewater often faces problems of large volume occupation, high cost, and long processing time. In this study, low-content Ce-modified g-C3N4 was prepared and used as a catalyst on stainless steel mesh photo-cathode in constructing a multi-stage cascade microbial fuel cell system to reduce treatment costs in an energy-saving way. The large specific surface area (332.5 m2 g-1) and mesoporous structure of the material, is favorable for catalytic reactions, in which Ce elements were mainly present in single atoms. The characterized catalyst indicated a pronounced effect of Ce species in increasing photo-current and the synergistic pollutant removal, microbial bio-degradation and cascade operation stability. In Batch-mode (light illumination, aeration, total HRT (hydraulic residence time) of 54 h) treatment through three cascade reactors, removed 88% COD (Chemical Oxygen Demand). With 0.5 mM PMS (peroxymonosulfate), 94% COD and 86% NH4+-N of the system were removed. The cascade net average COD removal capacity reached 16.04 kg per kg catalyst per day. The addition of PMS also enhanced the electricity generation. In continuous-mode, in totally 18 h treatment through the three-stages cascade reactors without PMS, overall, 83% COD and 78% TOC (Total Organic Carbon) were removed, reaching a net calculated system average COD removal capacity of 19.29 kg per kg catalyst per day. With Ce-g-C3N4 catalyst, the batch or continuous multi-stage cascade system demonstrated great technical flexibility and economic potential in treating high-strength, high-salinity amine-rich industrial wastewater.

Comprehensive effect of water matrix on catalytic ozonation of chloride contained saline wastewater.

Chloride ion (Cl-) is one of the most common anions in wastewater and saline wastewater, but its elusive effects on organics degradation are not clear yet in many cases. In this paper, the effect of Cl- on organic compounds degradation is intensively studied in catalytic ozonation of different water matrix. It was found that the effect of Cl- is almost completely reflected by transforming ·OH to reactive chlorine species (RCS), which is simultaneously competitive with organics degradation. The competition between organics and Cl- for ·OH directly determines the ratio of their consumption rate of ·OH, which depends on their concentration and reactivity with ·OH. Especially, the concentration of organics and solution pH may change greatly during organics degradation process, which will correspondingly influence the transformation rate of ·OH to RCS. Therefore, the effect of Cl- on organics degradation is not immutable, and may dynamically change. As the reaction product between Cl- and ·OH, RCS was also expected to affect the degradation of organics. But we found that Cl· had no significant contribution to the degradation of organics in catalytic ozonation, which may due to its reaction with ozone. Catalytic ozonation of a series of benzoic acid (BA) with different substituents in chloride contained wastewater was also investigated, and the results showed that the electron-donating substituents can weaken the inhibition of Cl- on BAs degradation, because they increase the reactivity of organics with ·OH, O3 and RCS.

Growth performance of different forestry species irrigated with moderately saline wastewater.

A seven month, pot study was conducted to evaluate the impact of moderately saline wastewater on the growth potential of six forestry plant species viz., Eucalyptus calmaldulensis, Dendrocalamus strictus, Casurina equisetfolia, Cassia fistula, Melia dubia, and Bambusa arundinacea under different drainage conditions namely, well-drained saline (WDS) condition and poor-drained saline condition (PDS) and the control with well-drained non-saline condition. WDS treatment resulted in no mortality whereas PDS treatment resulted in mortality in the range of 33-66%. The plant height and root dry biomass increased in the range of 145% to 221.6% and 4.3-37.1 g respectively in WDS treatment, however, 23.60% to 173.4% and 4.1-10.1 g in PDS treatment. Among all, Eucalyptus camaldulensis and Dendrocalamus strictus showed high Na+ accumulation in roots (2.16 ± 0.02% and 1.13 ± 0.01%), shoots (1.98 ± 0.01% and 0.74 ± 0.01%) and leaves (1.27 ± 0.02% and 0.86 ± 0.01%) in WDS treatment and in case of PDS treatment root (1.01 ± 0.01% and 0.23 ± 0.01%), shoot (1.12 ± 0.02% and 0.11 ± 0.01%), and leaf (0.07 ± 0.01% and 0.1 ± 0.02). The overall performance of both Eucalyptus camaldulensis and Dendrocalamus strictus was highest in WDS treatment. Therefore, it was concluded, that both plants had better performance than other plant species, a proper drainage system defines the overall productivity and treatment efficiency.

Forestry is not only a necessity for increasing tree cover and decreasing pressure on natural forests but also a most desired land use plan especially for reclaiming and rehabilitating the degraded lands. This study concluded that salt-affected and waterlogged areas and moderately saline waters can be utilized satisfactorily in raising forests using suitable plant species. Eucalyptus camaldulensis and Dendrocalamus strictus which showed good performance for salt tolerance and survival can be effectively used to mitigate the problems of waterlogged conditions and soil salinity remediation. Utilizing these species extensively can be a sustainable and suitable approach to promote afforestation and mitigate the problems of waterlogged conditions and for green belt development.

Heterogeneous photocatalytic activation of electrogenerated chlorine for the production of reactive oxygen and chlorine species: A new approach for Bisphenol A degradation in saline wastewater.

UV-E-chlorination/hematite nanoparticles (UV/E-Cl/HNs) as a heterogeneous photocatalytic activation of electrogenerated chlorine was assessed for the degradation of bisphenol A (BPA) as a new approach based on the generation of reactive chlorine and oxygen species. The prepared sample was characterized using multiple techniques, such as XRD, FTIR, FESEM, EDS, and BET-BJH. An excellent decontamination efficiency of 99.4% was achieved within 40 min of electrolysis under optimum conditions (pH of 5, HNs dosage 100 mg/L, current density of 20 mA/cm2, and NaCl concentration of 50 mM). The HOCl content was reduced more swiftly in the presence of ultraviolet (UV) irradiation and hematite, resulting in the production of oxidative radicals (i.e., •OH, Cl•, and Cl2•-). The scavenging experiments also verified the vital role of these radicals in oxidative treatment. The UV/E-Cl/HNs process is readily supplied with hydroxyl radicals through several mechanisms. Bicarbonate ions showed a noticeable inhibitory impact, whereas nitrate and sulfate anions only slightly affected BPA degradation. The HNs were a recoverable and stable catalyst for six cycles. Furthermore, the ECOSAR program predicted that the UV/E-Cl/HNs can be labeled as an environmental-friendly process. Eventually, reasonable degradation pathways were proposed based on the identified by-products through experimental and theoretical approaches.

Deciphering the fate of osmotic stress priming on enhanced microorganism acclimation for purified terephthalic acid wastewater treatment with high salinity and organic load.

Osmotic stress priming (OSP) was an effective management strategy for improving microbial acclimation to salt stress. In this study, the interaction between pollutants and microbiota, and microbial osmoregulation were investigated triggered by OSP (alternately increasing salinity and organic loading). Results showed that OSP significantly improved COD removal from 31.53 % to 67.99 % and mitigated the terephthalate inhibition produced by toluate, decreasing from 1908.08 mg/L to 837.16 mg/L compared with direct priming. Due to an increase in salinity, Pelotomaculum and Mesotoga were enriched to facilitate terephthalate degradation and syntrophic acetate oxidation (SAO). And organic load promoted acetate formation through syntrophic metabolism of Syntrophorhabdus/Pelotomaculum and SAO-dependent hydrogenotrophic methanogenesis. K+ absorbing, proline and trehalose synthesis participated in osmoregulation at 0.5 % salinity, while only ectoine alleviated intracellular osmolarity under 1.0 % salinity with OLR of 0.44 kg COD /m3. This study provided in-depth insight for microbial acclimation process of anaerobic priming of saline wastewater.