Exploring sample treatment strategies for untargeted metabolomics: A comparative study of solid phase microextraction (SPME) and homogenization with solid-liquid extraction (SLE) in renal tissue.

BACKGROUND: The selection of the sample treatment strategy is a crucial step in the metabolomics workflow. Solid phase microextraction (SPME) is a sample processing methodology with great potential for use in untargeted metabolomics of tissue samples. However, its utilization is not as widespread as other standard protocols involving steps of tissue collection, metabolism quenching, homogenization, and extraction of metabolites by solvents. Since SPME allows us to perform all these steps in one action in tissue samples, in addition to other advantages, it is necessary to know whether this methodology produces similar or comparable metabolome and lipidome coverage and performance to classical methods. RESULTS: SPME and homogenization with solid-liquid extraction (Homo-SLE) sample treatment methods were applied to healthy murine kidney tissue, followed by comprehensive metabolomics and lipidomics analyses. In addition, it has been tested whether freezing and storage of the tissue causes alterations in the renal metabolome and lipidome, so the analyses were performed on fresh and frozen tissue samples Lipidomics analysis revealed the exclusive presence of different structural membrane and intracellular lipids in the Homo-SLE group. Conversely, all annotated metabolites were detected in both groups. Notably, the freezing of the sample mainly causes a decrease in the levels of most lipid species and an increase in metabolites such as amino acids, purines, and pyrimidines. These alterations are principally detected in a statistically significant way by SPME methodology. Finally, the samples of both methodologies show a positive correlation in all the analyses. SIGNIFICANCE: These results demonstrate that in SPME processing, as long as the fundamentals of non-exhaustive extraction in a pre-equilibrium kinetic regime, extraction in a tissue localized area, the chemistry of the fiber coating and non-homogenization of the tissue are taken into account, is an excellent method to use in kidney tissue metabolomics; since this methodology presents an easy-to-use, efficient, and less invasive approach that simplifies the different sample processing steps.

Picoliter Single-Cell Reactor for Proteome Profiling by In Situ Cell Lysis, Protein Immobilization, Digestion, and Droplet Transfer.

Global profiling of single-cell proteomes can reveal cellular heterogeneity, thus benefiting precision medicine. However, current mass spectrometry (MS)-based single-cell proteomic sample processing still faces technical challenges associated with processing efficiency and protein recovery. Herein, we present an innovative sample processing platform based on a picoliter single-cell reactor (picoSCR) for single-cell proteome profiling, which involves in situ protein immobilization and sample transfer. PicoSCR helped minimize surface adsorptive losses by downscaling the processing volume to 400 pL with a contact area of less than 0.4 mm2. Besides, picoSCR reached highly efficient cell lysis and digestion within 30 min, benefiting from optimal reagent and high reactant concentrations. Using the picoSCR-nanoLC-MS system, over 1400 proteins were identified from an individual HeLa cell using data-dependent acquisition mode. Proteins with copy number below 1000 were identified, demonstrating this system with a detection limit of 1.7 zmol. Furthermore, we profiled the proteome of circulating tumor cells (CTCs). Data are available via ProteomeXchange with the identifier PXD051468. Proteins associated with epithelial-mesenchymal transition and neutrophil extracellular traps formation (which are both related to tumor metastasis) were observed in all CTCs. The cellular heterogeneity was revealed by differences in signaling pathways within individual cells. These results highlighted the potential of the picoSCR platform to help discover new biomarkers and explore differences in biological processes between cells.

A Comparative Study of B Cell Blast Isolation Methods from Bone Marrow Aspirates of Pediatric Leukemia Patients.

Density gradient centrifugation is a conventional technique widely utilized to isolate bone marrow mononuclear cells (BM-MNC) from bone marrow (BM) aspirates obtained from pediatric B-cell acute lymphoblastic leukemia (B-ALL) patients. Nevertheless, this technique achieves incomplete recovery of mononuclear cells and is relatively time-consuming and expensive. Given that B-ALL is the most common childhood malignancy, alternative methods for processing B-ALL samples may be more cost-effective. In this pilot study, we use several readouts, including immune phenotype, cell viability, and leukemia-initiating capacity in immune-deficient mice, to directly compare the density gradient centrifugation and buffy coat processing methods. Our findings indicate that buffy coat isolation yields comparable BM-MNC product in terms of both immune and leukemia cell content and could provide a viable, lower cost alternative for biobanks processing pediatric leukemia samples.

The Impact of Blood Sample Processing on Ribonucleic Acid (RNA) Sequencing.

In gene quantification and expression analysis, issues with sample selection and processing can be serious, as they can easily introduce irrelevant variables and lead to ambiguous results. This study aims to investigate the extent and mechanism of the impact of sample selection and processing on ribonucleic acid (RNA) sequencing. RNA from PBMCs and blood samples was investigated in this study. The integrity of this RNA was measured under different storage times. All the samples underwent high-throughput sequencing for comprehensive evaluation. The differentially expressed genes and their potential functions were analyzed after the samples were placed at room temperature for 0h, 4h and 8h, and different feature changes in these samples were also revealed. The sequencing results showed that the differences in gene expression were higher with an increased storage time, while the total number of genes detected did not change significantly. There were five genes showing gradient patterns over different storage times, all of which were protein-coding genes that had not been mentioned in previous studies. The effect of different storage times on seemingly the same samples was analyzed in this present study. This research, therefore, provides a theoretical basis for the long-term consideration of whether sample processing should be adequately addressed.

Evaluation of a novel lysis-based sample processing method to optimize Vibrio vulnificus detecting by loop-mediated isothermal amplification assay.

BACKGROUND: Vibrio vulnificus exists as one of the most serious foodborne pathogens for humans, and rapid and sensitive detection methods are needed to control its infections. As an emerging method, The Loop-Mediated Isothermal Amplification (LAMP) assay has been applied to the early detection of various foodborne pathogens due to its high efficiency, but sample preprocessing still prolongs the complete detection. To optimize the detection process, our study established a novel sample preprocessing method that was more efficient compared to common methods. RESULT: Using V. vulnificus as the detecting pathogen, the water-lysis-based detecting LAMP method shortened the preprocessing time to ≤ 1 min with 100% LAMP specificity; the detection limits of the LAMP assay were decreased to 1.20 × 102 CFU/mL and 1.47 × 103 CFU/g in pure culture and in oyster, respectively. Furthermore, the 100% LAMP specificity and high sensitivity of the water-lysis method were also obtained on detecting V. parahaemolyticus, V. alginolyticus, and P. mirabilis, revealing its excellent LAMP adaption with improvement in sensitivity and efficiency. CONCLUSION: Our study provided a novel LAMP preprocessing method that was more efficient compared to common methods and possessed the practical potential for LAMP application in the future.

Insight into Increased Recovery and Simplification of Genomic DNA Extraction Methods from Dried Blood Spots.

There is no consensus on how to perform the manual extraction of nucleic acids from dried blood spots (DBSs). Current methods typically involve agitation of the DBSs in a solution for varying amounts of time with or without heat, and then purification of the eluted nucleic acids with a purification protocol. We explored several characteristics of genomic DNA (gDNA) DBS extraction such as extraction efficiency, the role of red blood cells (RBCs) in extraction and critical kinetic factors to understand if these protocols can be simplified while maintaining sufficient gDNA recovery. We found that agitation in a RBC lysis buffer before performing a DBS gDNA extraction protocol increases yield 1.5 to 5-fold, depending upon the anticoagulant used. The use of an alkaline lysing agent along with either heat or agitation was sufficient to elute quantitative polymerase chain reaction (qPCR) amplifiable gDNA in 5 minutes. This work adds insight into the extraction of gDNA from DBSs with the intention of informing a simple, standardized manual protocol for extraction.

Challenges to the effectiveness of next-generation sequencing in formalin-fixed paraffin-embedded tumor samples for non-small cell lung cancer.

INTRODUCTION: Next-generation sequencing (NGS) of Formalin-Fixed and Paraffin-Embedded (FFPE) specimens is routine in precision oncology practice. However, results are not always conclusive, and it is important to identify which factors may influence FFPE tumor sequencing success. MATERIALS AND METHODS: Here, we evaluated the influence of pre-analytical factors on 705 samples of non-small cell lung cancer specimens that underwent NGS testing. Factors such as tumor site, tumor cell percentage, fragment size, primary tumor or metastasis, presence of necrosis, DNA purity, DNA concentration, sample origin and year of testing. RESULTS: The overall NGS success rate was 84.9 % (n = 599). Bone site specimens had a very low success rate (42.1 %), differing from lung samples (79.8 %) (P < 0.05). Samples with tumor percentages <5 % (success rate of 44.4 %) represented 14.1 % of failed sequencings. Moreover, samples with tumor percentages >10 %-20 % (82 %) did not differ from those with >30 % (88.9 %) on sequencing outcomes (P = 0.086). Specimens that provided DNA concentrations >2.0 ng/uL, 1.0-2.0 ng/uL, 0.5-1.0 ng/uL and <0.5 ng/uL had success rates of 92 %, 77.1 %, 61.3 % and 20.4 %, respectively. Small fragments (≤0.2 cm2) had a success rate of 74.7 % and were more prevalent in the unsuccessful group (P < 0.05). CONCLUSIONS: Our results suggest that tumor percentage, fragment size, decalcified bone specimens, and DNA concentration are potential modifiers of NGS success rates. Interestingly, specimens with tumor percentages between 10 % and 20 % have the same sequencing outcome than specimens with >30 %. These results can strengthen the understanding of factors that lead to NGS success variability.

A metagenomics method for the quantitative detection of bacterial pathogens causing hospital-associated and ventilator-associated pneumonia.

IMPORTANCE: The management of ventilator-associated pneumonia and hospital-acquired pneumonia requires rapid and accurate quantitative detection of the infecting pathogen. To this end, we propose a metagenomic sequencing assay that includes the use of an internal sample processing control for the quantitative detection of 20 relevant bacterial species from bronchoalveolar lavage samples.

Anaerobic Feces Processing for Fecal Microbiota Transplantation Improves Viability of Obligate Anaerobes.

Fecal microbiota transplantation (FMT) is under investigation for several indications, including ulcerative colitis (UC). The clinical success of FMT depends partly on the engraftment of viable bacteria. Because the vast majority of human gut microbiota consists of anaerobes, the currently used aerobic processing protocols of donor stool may diminish the bacterial viability of transplanted material. This study assessed the effect of four processing techniques for donor stool (i.e., anaerobic and aerobic, both direct processing and after temporary cool storage) on bacterial viability. By combining anaerobic culturing on customized media for anaerobes with 16S rRNA sequencing, we could successfully culture and identify the majority of the bacteria present in raw fecal suspensions. We show that direct anaerobic processing of donor stool is superior to aerobic processing conditions for preserving the bacterial viability of obligate anaerobes and butyrate-producing bacteria related to the clinical response to FMT in ulcerative colitis patients, including Faecalibacterium, Eubacterium hallii, and Blautia. The effect of oxygen exposure during stool processing decreased when the samples were stored long-term. Our results confirm the importance of sample conditioning to preserve the bacterial viability of oxygen-sensitive gut bacteria. Anaerobic processing of donor stool may lead to increased clinical success of FMT, which should further be investigated in clinical trials.

Optimizing the pre-analytical phase for accurate HPV detection in skin disorders: insights from a cutaneous warts case study.

Background: In previous years, several cutaneous disorders have been associated with human papillomavirus (HPV); however, the exact role of HPV remains largely unknown. The lack of optimization and standardization of the pre-analytical phase forms a major obstacle. The aim of this study was to develop an accurate/patient-friendly sampling method for skin disorders, with cutaneous warts as a case study. Methods: Various sample processing techniques, pre-treatment protocols and DNA extraction methods were evaluated. Several sampling methods were examined, that is, skin scrapings, swabs and a tape-based method. Quantification of DNA yield was achieved by beta-globin real-time polymerase chain reaction (qPCR), and a wart-associated HPV genotyping qPCR was used to determine the HPV prevalence. Results: All samples tested positive for beta-globin. Skin scrapings had significantly higher yield than both swab and tape-based methods (p < 0.01), the latter two did not significantly differ from each other (p > 0.05). No significant difference in DNA yield was found between cotton and flocked swabs (p > 0.05). All swabs were HPV positive, and although there were some discrepancies in HPV prevalence between both swabs, an overall good strength of agreement was found [κ = 0.77, 95% CI (0.71-0.83)]. Conclusion: Although skin scrapings produced the highest DNA yield, patient discomfort was an important limitation of this method. Considering that in combination with our optimized DNA extraction procedure, all samples gave valid results with the less invasive swab methods preferred. Standardization of the pre-analytical phase is the first step in establishing a link between HPV and specific skin disorders and may have significant downstream diagnostic as well as therapeutic implications.

Pragmatic Considerations When Extracting DNA for Metagenomics Analyses of Clinical Samples.

Microbiome analyses are essential for understanding microorganism composition and diversity, but interpretation is often challenging due to biological and technical variables. DNA extraction is a critical step that can significantly bias results, particularly in samples containing a high abundance of challenging-to-lyse microorganisms. Taking into consideration the distinctive microenvironments observed in different bodily locations, our study sought to assess the extent of bias introduced by suboptimal bead-beating during DNA extraction across diverse clinical sample types. The question was whether complex targeted extraction methods are always necessary for reliable taxonomic abundance estimation through amplicon sequencing or if simpler alternatives are effective for some sample types. Hence, for four different clinical sample types (stool, cervical swab, skin swab, and hospital surface swab samples), we compared the results achieved from extracting targeted manual protocols routinely used in our research lab for each sample type with automated protocols specifically not designed for that purpose. Unsurprisingly, we found that for the stool samples, manual extraction protocols with vigorous bead-beating were necessary in order to avoid erroneous taxa proportions on all investigated taxonomic levels and, in particular, false under- or overrepresentation of important genera such as Blautia, Faecalibacterium, and Parabacteroides. However, interestingly, we found that the skin and cervical swab samples had similar results with all tested protocols. Our results suggest that the level of practical automation largely depends on the expected microenvironment, with skin and cervical swabs being much easier to process than stool samples. Prudent consideration is necessary when extending the conclusions of this study to applications beyond rough estimations of taxonomic abundance.

Automated large volume sample preparation for vEM.

New developments in electron microscopy technology, improved efficiency of detectors, and artificial intelligence applications for data analysis over the past decade have increased the use of volume electron microscopy (vEM) in the life sciences field. Moreover, sample preparation methods are continuously being modified by investigators to improve final sample quality, increase electron density, combine imaging technologies, and minimize the introduction of artifacts into specimens under study. There are a variety of conventional bench protocols that a researcher can utilize, though most of these protocols require several days. In this work, we describe the utilization of an automated specimen processor, the mPrep™ ASP-2000™, to prepare samples for vEM that are compatible with focused ion beam scanning electron microscopy (FIB-SEM), serial block face scanning electron microscopy (SBF-SEM), and array tomography (AT). The protocols described here aimed for methods that are completed in a much shorter period of time while minimizing the exposure of the operator to hazardous and toxic chemicals and improving the reproducibility of the specimens' heavy metal staining, all without compromising the quality of the data acquired using backscattered electrons during SEM imaging. As a control, we have included a widely used sample bench protocol and have utilized it as a comparator for image quality analysis, both qualitatively and using image quality analysis metrics.

Facing the infinity: tackling large samples of challenging Chironomidae (Diptera) with an integrative approach.

Background: Integrative taxonomy is becoming ever more significant in biodiversity research as scientists are tackling increasingly taxonomically challenging groups. Implementing a combined approach not only guarantees more accurate species identification, but also helps overcome limitations that each method presents when applied on its own. In this study, we present one application of integrative taxonomy for the highly abundant and particularly diverse fly taxon Chironomidae (Diptera). Although non-biting midges are key organisms in merolimnic systems, they are often cast aside in ecological surveys because they are very challenging to identify and extremely abundant. Methods: Here, we demonstrate one way of applying integrative methods to tackle this highly diverse taxon. We present a three-level subsampling method to drastically reduce the workload of bulk sample processing, then apply morphological and molecular identification methods in parallel to evaluate species diversity and to examine inconsistencies across methods. Results: Our results suggest that using our subsampling approach, identifying less than 10% of a sample's contents can reliably detect >90% of its diversity. However, despite reducing the processing workload drastically, the performance of our taxonomist was affected by mistakes, caused by large amounts of material. We conducted misidentifications for 9% of vouchers, which may not have been recovered had we not applied a second identification method. On the other hand, we were able to provide species information in cases where molecular methods could not, which was the case for 14% of vouchers. Therefore, we conclude that when wanting to implement non-biting midges into ecological frameworks, it is imperative to use an integrative approach.

Preanalytical Variables in Hemostasis Testing.

Hemostasis testing performed in clinical laboratories are critical for assessing hemorrhagic and thrombotic disorders. The assays performed can be used to provide the information required for diagnosis, risk assessment, efficacy of therapy, and therapeutic monitoring. As such, hemostasis tests should be performed to the highest level of quality, including the standardization, implementation, and monitoring of all phases of the testing, which include the preanalytical, analytical, and post-analytical phases. It is well established that the preanalytical phase is the most critical component of the testing process, being the hands-on activities, including patient preparation for blood collection, as well as the actual blood collection, including sample identification and the post-collection handling to include sample transportation, processing, and storage of samples when testing is not performed immediately. The purpose of this article is to provide an update to the previous edition of coagulation testing-related preanalytical variables (PAV) and, when properly addressed and performed, can reduce the most common causes of errors in the hemostasis laboratory.

Intensity of sample processing methods impacts wastewater SARS-CoV-2 whole genome amplicon sequencing outcomes.

Wastewater SARS-CoV-2 surveillance has been deployed since the beginning of the COVID-19 pandemic to monitor the dynamics in virus burden in local communities. Genomic surveillance of SARS-CoV-2 in wastewater, particularly efforts aimed at whole genome sequencing for variant tracking and identification, are still challenging due to low target concentration, complex microbial and chemical background, and lack of robust nucleic acid recovery experimental procedures. The intrinsic sample limitations are inherent to wastewater and are thus unavoidable. Here, we use a statistical approach that couples correlation analyses to a random forest-based machine learning algorithm to evaluate potentially important factors associated with wastewater SARS-CoV-2 whole genome amplicon sequencing outcomes, with a specific focus on the breadth of genome coverage. We collected 182 composite and grab wastewater samples from the Chicago area between November 2020 to October 2021. Samples were processed using a mixture of processing methods reflecting different homogenization intensities (HA + Zymo beads, HA + glass beads, and Nanotrap), and were sequenced using one of the two library preparation kits (the Illumina COVIDseq kit and the QIAseq DIRECT kit). Technical factors evaluated using statistical and machine learning approaches include sample types, certain sample intrinsic features, and processing and sequencing methods. The results suggested that sample processing methods could be a predominant factor affecting sequencing outcomes, and library preparation kits was considered a minor factor. A synthetic SARS-CoV-2 RNA spike-in experiment was performed to validate the impact from processing methods and suggested that the intensity of the processing methods could lead to different RNA fragmentation patterns, which could also explain the observed inconsistency between qPCR quantification and sequencing outcomes. Overall, extra attention should be paid to wastewater sample processing (i.e., concentration and homogenization) for sufficient and good quality SARS-CoV-2 RNA for downstream sequencing.

Assessment of Omitting MacConkey Agar as a Primary Inoculating Medium for MALDI-TOF MS-Based Bacterial Identification from Urine, Blood, and Respiratory Samples.

OBJECTIVE: MacConkey agar (MAC) is commonly used as a primary medium for conventional bacterial identification in clinical microbiology laboratories. Matrix-assisted laser desorption ionization time-of-flight mass spectrometry (MALDI-TOF MS) has revolutionized microbial identification and is considered a reliable identification tool. While conventional identification methods rely on colony characteristics, MALDI-TOF MS requires a pure isolate on a solid medium. METHODS: This study investigated whether MAC can be omitted as a routine inoculation medium for urine, lower respiratory tract (LRT), and positive blood culture samples. The study included 462 clinical samples. Among these, 221 were urine samples, 141 were positive blood cultures, and the remaining 100 were LRT samples. The samples were inoculated on blood agar (BA) and MAC for the control group and on BA only for the experimental group, followed by incubation and identification with MALDI-TOF MS. RESULTS: The BA only group showed the same microbial identification using MALDI-TOF MS as the control BA and MAC groups for blood and LRT specimens. For urine samples, 99.1% (219/221) of the samples produced the same identification results for the two groups. The cause of discrepant results for two urine specimens was due to Proteus species overgrowth on BA, which hindered non-Proteus spp. identification for the BA-only group. CONCLUSION: Our results may indicate that omitting MAC has little or no impact on the recovery of organisms present in culture. However, due to possible Proteus spp. overgrowth, caution should be exercised in the decision to omit MAC from the primary inoculating medium, which necessitates further studies in other centers with a larger sample size.

The Role of the Preanalytical Step for Human Saliva Analysis via Vibrational Spectroscopy.

Saliva is an easily sampled matrix containing a variety of biochemical information, which can be correlated with the individual health status. The fast, straightforward analysis of saliva by vibrational (ATR-FTIR and Raman) spectroscopy is a good premise for large-scale preclinical studies to aid translation into clinics. In this work, the effects of saliva collection (spitting/swab) and processing (two different deproteinization procedures) were explored by principal component analysis (PCA) of ATR-FTIR and Raman data and by investigating the effects on the main saliva metabolites by reversed-phase chromatography (RPC-HPLC-DAD). Our results show that, depending on the bioanalytical information needed, special care must be taken when saliva is collected with swabs because the polymeric material significantly interacts with some saliva components. Moreover, the analysis of saliva before and after deproteinization by FTIR and Raman spectroscopy allows to obtain complementary biological information.

Guidelines for Handling of Cytological Specimens in Cancer Genomic Medicine.

Rapid advances are being made in cancer drug therapy. Since molecularly targeted therapy has been introduced, personalized medicine is being practiced, pathological tissue from malignant tumors obtained during routine practice is frequently used for genomic testing. Whereas cytological specimens fixed mainly in alcohol are considered to be more advantageous in terms of preservation of the nucleic acid quality and quantity. This article is aimed to share the information for the proper handling of cytological specimens in practice for genomic medicine based on the findings established in "Guidelines for Handling of Cytological Specimens in Cancer Genomic Medicine (in Japanese)" published by the Japanese Society of Clinical Cytology in 2021. The three-part practical guidelines are based on empirical data analyses; Part 1 describes general remarks on the use of cytological specimens in cancer genomic medicine, then Part 2 describes proper handling of cytological specimens, and Part 3 describes the empirical data related to handling of cytological specimens. The guidelines indicated proper handling of specimens in each fixation, preparation, and evaluation.

The influence of blood sample processing on blood-based DNA methylation signatures.

Stability is crucial for the clinical applicable biomarker such as DNA methylation profiles. However, the influence of various blood processing on the DNA methylation signatures have been barely studied. Here, we systematically evaluated the impact of temporary storage and frozen and thaw on the levels of DNA methylation. The methylation intensities of 13 CpG loci from 53 individuals (42 healthy participants and 11 lung cancer patients) whose blood samples were processed by up to 14 various protocols were quantitatively determined by the mass spectrometry, obtaining more than 8,000 quantitative data. We disclosed a trend of accumulatively increased DNA methylation along with time when the blood from healthy people were stored for up to 96 h at room temperature (RT), whereas the storage at 4°C had much weaker effects or no impact. On the contrary, the methylation patterns in the blood of lung cancer patients were more stable at both RT and 4°C even for 96 h. Multiple cycles of frozen and thaw could result in demethylation, but was more significant to the blood than to the extracted DNA. Our study indicated that the blood processing in vitro could influence the DNA methylation signatures and introduce unexpected biases.

Reduced capability of refrigerated white rhinoceros whole blood to produce interferon-gamma upon mitogen stimulation.

Ante-mortem surveillance for Mycobacterium bovis (M. bovis) infection in the Kruger National Park (KNP) rhinoceros population currently relies on results from the QuantiFERON-TB Gold (In-Tube) Plus (QFT)-interferon gamma (IFN-γ) release assay (IGRA). However, same-day processing of rhinoceros blood samples for this test is a logistical challenge. Therefore, a pilot study was performed to compare mitogen-stimulated and unstimulated IFN-γ concentrations in plasma from rhinoceros whole blood processed within 6 h of collection or stored at 4°C for 24 and 48 h prior to incubation in QFT tubes. Replicate samples of heparinized whole blood from seven subadult male white rhinoceros were used. Results showed no change in IFN-γ levels in unstimulated samples, however the relative concentrations of IFN-γ (based on optical density values) in mitogen plasma decreased significantly with increased time blood was stored post-collection and prior to QFT stimulation. These findings support a need for same-day processing of rhinoceros blood samples for QFT-IGRA testing as per the current practice. Further investigation using TB-antigen stimulated samples is warranted to properly assess the impact of blood storage on TB test results in rhinoceros.