Biogenic amorphous FeOOH activated additional intracellular electron flow pathways for accelerating reductive dechlorination of tetrachloroethylene.

Dissimilatory iron-reducing bacteria (DIRB) with extracellular electron transfer (EET) capabilities have shown significant potential for bioremediating halogenated hydrocarbon contaminated sites rich in iron and humic substances. However, the role and microbial molecular mechanisms of iron-humic acid (Fe-HA) complexes in the reductive dehalogenation process of DIRB remains inadequately elucidated. In this study, we developed a sustainable carbon cycling approach using Fe-HA complexes to modulate the electron flux from sawdust (SD), enabling almost complete reductive dechlorination by most DIRB (e.g., Shewanella oneidensis MR-1) that lack complex iron-sulfur molybdo enzymes. The SD-Fe-HA/MR-1 system achieved a 96.52% removal efficiency of tetrachloroethylene (PCE) at concentrations up to 250 µmol/L within 60 days. Material characterization revealed that DIRB facilitated the hydrolysis of macromolecular carbon sources by inducing the formation of amorphous ferrihydrite (FeOOH) in Fe-HA complexes. More importantly, the bioavailable FeOOH activated additional intracellular electron flow pathways, increasing the activity of potential dehalogenases. Transcriptome further highlight the innovative role of biogenic amorphous FeOOH in integrating intracellular redox metabolism with extracellular charge exchange to facilitate reductive dechlorination in DIRB. These findings provide novel insights into accelerating reductive dechlorination in-situ contaminated sites lacking obligate dehalogenating bacteria.

Effects of a novel sawdust-modified carrier on performance, bioaccumulation and microbial community of sequencing batch reactor.

The impact of a novel sawdust-modified carrier on the performance of aerobic sequencing batch reactor (SBR) was examined. Compared with the conventional polyethylene (PE) carrier, the sawdust-modified carrier had coarse surface and porous side wall, which was beneficial for the rapid formation of biofilm. The biomass of sawdust-modified carrier was 3.4 ± 0.7 times more than those of PE carrier at the end of this study. The biofilm gotten from suspended carrier had higher extracellular polymeric substances (EPS) concentrations than activated sludge (AS). The EPS from biofilm contained higher proportions of polysaccharides compared to those from AS. The SBR with addition of sawdust-modified carrier exhibited higher ammonia nitrogen removal efficiency (84.8%) than the one with addition of conventional PE carrier (73.1%) in a typical cycle at 12 h. The volumetric nitrification rates of modified carrier were higher than those of conventional PE carrier. High throughput sequencing revealed that sawdust-modified carriers exhibited greater microbial richness and diversity compared with traditional PE carriers. Saccharimonadales was the most predominant genus that removed organic matter under aerobic condition, whereas Nitrospira was the dominant nitrifying genus. The present study verifies the advantage of sawdust-modified carrier, which has the potential for the full-scale application in the future.

Molecular identification of Shiitake (Lentinula edodes), analysis and production of beta-glucan using beech wood sawdust waste.

Lentinula edodes has the ability to grow and produce bioactive compounds on industrial by-products. This study aimed to produce B-glucan of cell wall Shiitake on Beechwood Sawdust (BWS) through a two-step procedure, which included fermentation and B-glucan extraction and purification. Shiitake mushrooms are cultivated by solid-state fermentation (SSF) using the Jamas method to increase the purity of B-glucan. The fermented substrate was first separated and then hydrolyzed by sodium hydroxide (NaOH) (10 M, 1 M), followed by acid hydrolysis extraction. The structure and purity of B-glucan were confirmed by FTIR, NMR, and AFM spectroscopy. The fungus used was molecularly identified by the 18 s rRNA method. Shiitake mushroom was produced by SSF using BWS and high purity ß-glucan was extracted from the produced polysaccharide in the amount of 67.33 mg/g. FTIR, NMR, and AFM analyses proved the production of beta-glucan, and based on molecular identification, it was determined that the mushroom used was Lentinula edodes. The results obtained show that SSF is a valuable technology for the production of biomass and polysaccharides by utilizing the strain of L. edodes. To the best of our knowledge, the yield reported is the highest by the strain of L. edodes using SSF.

Impact of Mechanochemical Activation (MChA) on Characteristics and Dye Adsorption Behavior of Sawdust-Based Biocarbons.

The increase in environmental pollution due to the development of industry and human activity has resulted in intensive development of research on the possibility of its purification. A very effective method is the pollutants' adsorption from the air and water environment. For adsorption to be effective, materials with a specific structure and a well-developed surface decorated with numerous functionalities, e.g., biocarbons (BC), are necessary. An effective method of activating biocarbons is mechanochemical milling, an environmentally friendly procedure. This paper describes the possibility of using mechanochemical activation (MChA) of non-porous biocarbons to develop surface and porosity for their use in processes of pollutant adsorption. BC was characterized based on N2 adsorption, thermogravimetry (TGA), SEM/EDS imaging, Fourier (ATR-FTIR) and Raman spectroscopies, as well as titration using the Boehm method and determination of zeta potential. The adsorption capacity of BC for methylene blue (MB) was studied. It was proven that the solvent-free MChA made it possible to obtain microporous biocarbons, causing an intensive increase in the surface area and pore volume and the generation of oxygen functionalities. The biocarbons had predominantly acidic (mainly carboxylic) or basic functionalities and exhibited an amorphous structure. BC proved to be effective in adsorbing MB from aqueous solutions.

Coniferous Bark as Filler for Polylactic Acid-Based Biocomposites.

This study explores the possibilities of utilisation of coniferous bark as a filler in wood-polymer composites (WPCs), its impact on properties such as the modulus of rupture (MOR), modulus of elasticity (MOE), thickness swelling (TS) and water absorption (WA) after 2 h and 24 h of immersion in water and the significance of this impact compared to other factors. Six variants of bark-polylactic acid (PLA) WPCs were manufactured, differentiated by their filler content and filler particle size. As a comparison, analogous composites filled with coniferous sawdust were also manufactured. Bark-filled composites were characterised by lower TS and WA after both 2 h and 24 h of immersion, as well as lower water contact angles and surface free energy. The bark filler decreased the composites' MORs and MOEs, while greater differences were noticed for variants filled with small particles. The type of filler was the second most important factor contributing to variance in this study, with the filler content being the most important one.

Study of the Effect of Cedar Sawdust Content on Physical and Mechanical Properties of Cement Boards.

The growing demand for sustainable building materials, amid escalating costs, has spurred interest in alternative solutions such as wood cement composites. This study explores the feasibility of producing wood cement boards (WCBs) using locally sourced cedar sawdust as a reinforcing agent. Boards with a thickness of 10 mm and a target density of 1200 kg/m3 were manufactured under pressures ranging from 2 to 6 MPa for 24 h. Cedar sawdust, used as raw and untreated material, was incorporated into the mixture as a partial substitute for cement in varying proportions, ranging from 10% to 25% (by weight). The WCBs were cured for 28 days under ambient conditions. Physical properties including density, water absorption (WA), and thickness swelling (TS) were assessed, along with mechanical properties through flexural tests. The results showed that increasing cedar sawdust content decreased both density and mechanical performance while increasing WA and TS. Microstructural analysis (SEM and EDS) revealed significant porosity at higher sawdust contents, while lower contents had better matrix-reinforcement cohesion. Additionally, substantial levels of calcium and silicon were detected on the sawdust surface, indicating stabilized cement hydration products. These findings, supported by thermal (TGA and DSC) and FTIR analyses, clearly demonstrate that cement boards with 10% cedar sawdust exhibit favorable properties for non-structural applications, such as wall and partition cladding.

Investigation of kinetics, reaction mechanisms, thermodynamics, and synergetic effects in co-pyrolysis of wood sawdust and linear low-density polyethylene using the thermogravimetric approach.

This study focused on investigating thermal degradation behaviors, kinetics, reaction mechanisms, synergistic effects, and thermodynamic parameters of wood sawdust (WSD), linear low-density polyethylene (LLDPE), and their blends (LW1:3, LW1:1, and LW3:1) during co-pyrolysis in a thermogravimetric analyzer (TGA). Thermal behavior exhibited a LW1:3 blend (25 wt.% LLDPE) showing significant mass loss at lower temperatures (150 to 300 °C) compared to the individual feedstocks, such as 150 to 400 °C and 300 to 520 °C for WSD and LLDPE, respectively. The iso-conversional methods (KAS, FWO, and FM) were used to determine the kinetic parameters (Ea and A), and the activation energy drop was highest for the LW1:3 blend. According to the master plots, the third-order reaction (O3), nucleation (P2/3), and diffusional model (D4) were the predominant reaction mechanisms for the co-pyrolysis of the LW1:3, LW1:1, and LW3:1 blend, respectively. The thermodynamic parameters demonstrate that a small amount of plastic addition into WSD can improve the reactivity of the blend, shorten the reaction time, and cause less energy-intensive reactions. The values of ΔH, ΔG, and ΔS also confirmed the co-pyrolysis process's spontaneity and endothermic nature. The Fourier transforms infrared spectrometer (FTIR) spectra of raw feedstock, blends, and their biochar revealed some of the peaks were shifted, the intensity was reduced, and disappearance can happen when the temperature was increased. Using the experimental and theoretical/predicted activation energies, the parity chart illustrates the synergistic effects of co-pyrolysis of different blends, and the LW1:3 blend has a favorable synergistic impact. These results could be helpful in process optimization and designing an effective reactor system for co-pyrolysis.

Machine Learning Models to Classify Shiitake Mushrooms (Lentinula edodes) According to Their Geographical Origin Labeling.

The shiitake mushroom has gained popularity in the last decade, ranking second in the world for mushrooms consumed, providing consumers with a wide variety of nutritional and healthy benefits. It is often not clear the origin of these mushrooms, so it becomes of great importance to the consumers. In this research, different machine learning algorithms were developed to determine the geographical origin of shiitake mushrooms (Lentinula edodes) consumed in Korea, based on experimental data reported in the literature (δ13C, δ15N, δ18O, δ34S, and origin). Regarding the origin of shiitake in three categories (Korean, Chinese, and mushrooms from Chinese inoculated sawdust blocks), the random forest model presents the highest accuracy value (0.940) and the highest kappa value (0.908) for the validation phase. To determine the origin of shiitake mushrooms in two categories (Korean and Chinese, including mushrooms from Chinese inoculated sawdust blocks in the latter ones), the support vector machine model is chosen as the best model due to the high accuracy (0.988) and kappa (0.975) values for the validation phase. Finally, to determine the origin in two categories (Korean and Chinese, but this time including the mushrooms from Chinese inoculated sawdust blocks in the Korean ones), the best model is the random forest due to its higher accuracy value (0.952) in the validation phase (kappa value of 0.869). The accuracy values in the testing phase for the best selected models are acceptable (between 0.839 and 0.964); therefore, the predictive capacity of the models could be acceptable for their use in real applications. This allows us to affirm that machine learning algorithms would be suitable modeling instruments to determine the geographical origin of shiitake.

Ionic Liquid-Based Extraction of Fulvic-like Substances from Wood Sawdust: Reproducing Unique Biological Activities of Fulvic Acids Using Renewable Natural Sources.

Fulvic acids (FAs) have been commercially used in cosmetics and agronomy due to their unique biological activities, such as plant stimulation and anti-inflammatory effects. However, the extraction sources of FAs, such as peat, are currently limited. Consequently, new extraction methods using renewable resources need to be developed, while reproducing the biological functions. Here, ionic liquids (ILs) effectively extracted fulvic-like substances (FLSs) from wood sawdust. The overall molecular weight distributions of FLSs were similar to those of commercial FAs, and key organic groups (e.g., aromatic, phenolic, and methoxy groups) were also found to be shared between commercial FAs and FLSs. Detailed compositional analysis revealed by high-resolution mass spectrometry showed that the extracts contain both lignin-like and lipid-like molecules, while commercial FAs are biased toward lignin-like and carbohydrate-like molecules. FLSs generally showed better and similar performance in radical scavenging activity against ABTS+· and H2O2. Fibroblast proliferation and lettuce growth enhancements were also observed with the extract containing 1-ethyl-3-methylimidazolium acetate and triethylammonium hydrogen sulfate, respectively, which performed better than commercial FAs. Immunofluorescence staining of in vitro human follicle dermal papilla cells supports that coexpression of hair growth-related proteins can be accelerated with FLSs, and this effect was further evidenced by in vivo mouse model experiments. Finally, the reusability of ILs in the extraction process was confirmed by analyzing the structural features of FLSs from each recycling. Our findings indicate that ILs are useful for obtaining biologically functional fulvic analogs from renewable plant sources.

Co-pyrolysis of refinery oil sludge with biomass and spent fluid catalytic cracking catalyst for resource recovery.

Catalytic co-pyrolysis of two different refinery oily sludge (ROS) samples was conducted to facilitate resource recovery. Non-catalytic pyrolysis in temperatures ranging from 500 to 600°C was performed to determine high oil yields. Higher temperatures enhanced the oil yields up to ~ 24 wt%, while char formation remained unchanged (~ 45%) for S1. Conversely, S2 exhibited a notably lower oil yield (~ 4 wt%) than S1. Pyrolysis oil of S1 consisted of phenolics (~ 50% at 600 °C) whereas hydrocarbons were predominant in S2 oil (~ 80% at 600 °C). Catalytic pyrolysis of S1 did not exhibit a substantial impact on oil yields but the oil composition varied significantly. High hydrocarbons, phenolics, and aromatics were obtained with molecular sieve (MS), metal slag, and ZSM-5, respectively. Catalytic co-pyrolysis of S2 with sawdust (SD) in the presence of MS enhanced the oil yield, and the resulting oil consisted of high hydrocarbons (~ 54%) and aromatics (~ 44%).

Effect of biochar addition on the anaerobic digestion of food waste: microbial community structure and methanogenic pathways.

This study assessed the effects of the addition of biochar prepared at 700 °C with different dosages on the anaerobic digestion of food waste. The biochar addition at a concentration of 10.0 g/L increased the cumulative methane yield by 128%, and daily methane production was also significantly promoted. The addition of biochar derived from poplar sawdust significantly increased the relative abundance of dominant bacteria for anaerobic digestion by 85.54-2530% and promoted the degradation of refractory organic matter and the transfer of materials between the hydrolysis and acid production stages. Further analysis has demonstrated that Bathyarchaeia and hydrogenotrophic methanogens were enriched by the biochar addition. Meanwhile, the relative abundances of functional genes, including C5-branched dibasic acid metabolism, and pyruvate metabolism, were increased by 11.38-26.27%. The relative abundances of genes related to major amino acid metabolism, including histidine metabolism, lysine biosynthesis, and phenylalanine, tyrosine, and tryptophan biosynthesis, were increased by 11.96-15.71%. Furthermore, the relative abundances of genes involved in major replication and repair were increased by 14.76-22.76%, and the major folding, sorting, degradation, and translation were increased by 14.47-19.95%, respectively. The relative abundances of genes related to major membrane transport and cell motility were increased by 10.02 and 83.09%, respectively.

Energy usage of spruce with waste face masks and spent coffee grounds as fuel in a pellet boiler.

It is necessary to reduce dependency on fossil fuels for heating and waste generation, while also utilizing the energy potential of waste materials. One possibility is to create fuel pellets where waste makes up a small proportion so that the properties of the wood are not significantly altered with. This article investigates the energy usage of pellets containing spent coffee grounds (5 % or 10 %) and waste face masks (5 % or 10 %), with spruce sawdust as the primary input material (80 % or 90 %). The elemental, thermogravimetric, calorific value, mechanical durability, emission and performance characteristics, and ash melting temperatures of the pellets were evaluated during the experiment. The results were compared with respect to pure spruce sawdust pellets and the specified limit values for wood pellets in commercial and residential applications as specified in ISO 17225 [18]. Both tested samples met the element content limit (N, S, Cl, As, Cd, Cr, Cu, Pb, Hg, Ni, and Zn) for the highest quality grade (A1). No significant amounts of harmful elements were detected. The samples also complied with the limits of moisture content, ash content, and net calorific value (also known as lower calorific value). All samples met the emission limits in their respective classes (3, 4, or 5) according to STN EN 303-5+A1 [35]. However, the samples failed to meet the limit values for mechanical durability and ash melting temperatures. Despite this, the manufactured pellet samples represent a suitable fuel product for combustion purposes as a more sustainable thermal energy fuel.

Chemical Compositions and In Vitro Antioxidant Activities of the Essential Oils of Sawdust and Resin-Rich Bark from Azorean Cryptomeria japonica (Cupressaceae).

In the Azores archipelago (Portugal), forest operations and wood industry generate large amounts of Cryptomeria japonica biomass residues (CJBR), which can be used to produce valuable essential oils (EOs). In this study, we evaluated the chemical composition and antioxidant activities of EOs from Azorean C. japonica sawdust (CJS) and resin-rich bark (CJRRB). The CJS and CJRRB EOs, obtained via hydrodistillation, showed different yield values (0.27% vs. 0.80% v/w, dry weight) and also different chemical profiles, as assessed using GC/MS. A total of 64 and 85 components were identified in CJS and CJRRB EOs, representing 95.7% and 96.9% of the total composition, respectively. The major components in CJS EO were oxygenated sesquiterpenes (mainly α+ß-eudesmol, 1-epicubenol, and cubebol), while in CJRRB EO, the major components were monoterpene hydrocarbons, including α-pinene, δ-3-carene, and limonene (66.6% vs. 6.4% for oxygenated sesquiterpenes and 0% vs. 64% for monoterpene hydrocarbons, respectively). Antioxidant activity was estimated using (i) two radical-based assays, 2,2-diphenyl-1-picrylhydrazyl (DPPH) and 2,2'-azinobis-3-ethylbenzothiazoline-6-sulfonic acid (ABTS) radical scavenging activity, and (ii) a lipid model assay, ß-carotene-linoleic acid bleaching activity (BCBA). Both CJS and CJRRB EOs exhibited concentration-dependent antioxidant activities, and their DPPH, ABTS, and BCBA EC50 values were 1107 vs. 1275 µg/mL, 260 vs. 498 µg/mL, and 1764 vs. 662 µg/mL, respectively. The results indicate that both EOs were able to exert antioxidant activity via different mechanisms of action. Therefore, Azorean CJS and CJRRB may be sustainable sources for antioxidant compounds. This study expands the chemical and biological knowledge of CJBR EOs and, consequently, adds more value to the C. japonica EO industry.

Synthesis of gamma irradiated acrylic acid-grafted-sawdust (SD-g-AAc) for trivalent chromium adsorption from aqueous solution.

Water pollution caused by chromium released from tannery is a serious concern to the environment and public health. Chromium removal from tannery effluent is a crying need before discharging to the surface water. In this study, acrylic acid-grafted sawdust was prepared by Tectona grandis sawdust grafting with acrylic acid employing gamma irradiation in the presence of air and Mohr's salt. It was treated with NaOH and the characterization of surface morphology and functional groups of modified sawdust was studied by SEM and FTIR.. The effects of solution pH, adsorbent dosage, adsorption time, and initial Cr(III) ion concentration were investigated by batch sorption studies. The process was found to be pH, temperature and concentration dependent. Langmuir and Freundlich isotherms were applied to realize the adsorption process in depth, and it was found that the Langmuir isotherm model fitted well with experimental data (R2 value of 0.983). The maximum monolayer adsorption capacity of acrylic acid-grafted sawdust for Cr(III) from aquous solution was found to be 21.55 mg g-1 at 25 °C. Pseudo-first-order and pseudo-second-order kinetic models were employed to analyze the kinetics of the process, and it was found that the experimental process followed the pseudo-second-order kinetic model, i.e. chemisorption. This study revealed that acrylic acid-grafted sawdust has a decent potential for the removal of Cr(III) from tannery effluents.

A designed ZrOCl2/ethylene glycol deep eutectic solvent for efficient lignocellulose valorization.

Deep eutectic solvents (DESs) hold great potential in biorefining because they can efficiently deconstruct the recalcitrant structure of lignocellulose. In particular, inorganic salts with Lewis acids have been proven to be effective at cleaving lignin-carbohydrate complexes. Herein, a Zr-based DES system composed of metal chloride hydrate (ZrOCl2·8H2O) and ethylene glycol (EG) was designed and used for poplar powder pretreatment. Zr4+-based salts provide sufficient acidity for lignocellulose depolymerization. The acidity of the DES was analysed by the Kamlet-Taft solvatochromic parameter, and the results demonstrated that the acidity can be regulated by the DES composition. Under the optimum conditions (ZrOCl2·8H2O:EG molar ratio of 1:2), the DES pretreatment removes nearly 100 % hemicellulose and 94.7 % lignin. The recovered lignin exhibited a low polydispersity of 1.7. The cellulose residues deliver an efficiency of 94.4 % upon enzymatic digestion. Moreover, the DES can be easily recovered with high yield and purity, and the recycled DES still maintains high delignification and enzymatic hydrolysis efficiencies. The proposed DES pretreatment technology is promising for biomass valorization.

Significantly Enhanced Nitrate and Phosphorus Removal by Pyrite/Sawdust Composite-Driven Mixotrophic Denitrification with Boosted Electron Transfer: Comprehensive Evaluation of Water-Gas-Biofilm Phases during a Long-Term Study.

Further reducing total nitrogen (TN) and total phosphorus (TP) in the secondary effluent needs to be realized effectively and in an eco-friendly manner. Herein, four pyrite/sawdust composite-based biofilters were established to treat simulated secondary effluent for 304 days. The results demonstrated that effluent TN and TP concentrations from biofilters under the optimal hydraulic retention time (HRT) of 3.5 h were stable at <2.0 and 0.1 mg/L, respectively, and no significant differences were observed between inoculated sludge sources. The pyrite/sawdust composite-based biofilters had low N2O, CH4, and CO2 emissions, and the effluent's DOM was mainly composed of five fluorescence components. Moreover, mixotrophic denitrifiers (Thiothrix) and sulfate-reducing bacteria (Desulfosporosinus) contributing to microbial nitrogen and sulfur cycles were enriched in the biofilm. Co-occurrence network analysis deciphered that Chlorobaculum and Desulfobacterales were key genera, which formed an obvious sulfur cycle process that strengthened the denitrification capacity. The higher abundances of genes encoding extracellular electron transport (EET) chains/mediators revealed that pyrite not only functioned as an electron conduit to stimulate direct interspecies electron transfer by flagella but also facilitated EET-associated enzymes for denitrification. This study comprehensively evaluates the water-gas-biofilm phases of pyrite/sawdust composite-based biofilters during a long-term study, providing an in-depth understanding of boosted electron transfer in pyrite-based mixotrophic denitrification systems.

Experiment and Analysis of Variance for Stabilizing Fine-Grained Soils with Cement and Sawdust Ash as Liner Materials.

Due to volume change and low strength, fine-grained soils are problematic in construction. Stabilization with cement and sawdust ash (SDA) by-products can improve engineering properties. This study aimed to investigate the effectiveness of cement and sawdust ash (SDA) in stabilizing fine-grained soils for liner applications. Varying proportions of cement (0-9%) and SDA (0-10%) were added to soil samples (n = 24). Specimens were tested for unconfined compressive strength (UCS), hydraulic conductivity (HC), and volumetric shrinkage strain (VSS). Two-way ANOVA analyzed stabilization effects. Optimal stabilization occurred with 6% cement and 6% SDA, resulting in significant increases in UCS (51 to 375 kN/m2) and decreases in HC (1.7 × 10-8 to 4.7 × 10-10 m/s) and VSS (12.8 to 3.51%) compared to untreated soil. ANOVA indicated that both cement and SDA had statistically significant (p < 0.05) effects on improving all three engineering properties. The addition of 6% cement and 6% SDA significantly improved the expansive soil's strength, hydraulic conductivity, and volume change properties. ANOVA confirmed the quantitative improvements and the significance of both stabilizers. Stabilization using the by-product SDA has the potential to be a sustainable soil improvement method.

Predictive modeling of copper (II) adsorption from aqueous solutions by sawdust: a comparative analysis of adaptive neuro-fuzzy interference system (ANFIS) and artificial neural network (ANN) approaches.

Heavy metal ions are considered to be the most prevalent and toxic water contaminants. The objective of thois work was to investigate the effectiveness of employing the adsorption technique in a laboratory-size reactor to remove copper (II) ions from an aqueous medium. An adaptive neuro-fuzzy inference system (ANFIS) and a feed-forward artificial neural network (ANN) were used in this study. Four operational factors were chosen to examine their influence on the adsorption study: pH, contact duration, initial Cu (II) ions concentration, and adsorbent dosage. Using sawdust from wood, prediction models of copper (II) ions adsorption were optimized, created, and developed using the ANN and ANFIS models for tests. The result indicates that the determination coefficient for copper (II) metal ions in the training dataset was 0.987. Additionally, the ANFIS model's R2 value for both pollutants was 0.992. The findings demonstrate that the models presented a promising predictive approach that can be applied to successfully and accurately anticipate the simultaneous elimination of copper (II) and dye from the aqueous solution.

Feasibility of sludge deep dewaterability improvement for incineration disposal by combined conditioning of freeze-thaw and sawdust.

Sludge incineration is the main strategy for sludge reduction in China. The combined conditioning of lime and chemical agents has been proven to achieve sludge dewatering by disrupting the extracellular polymeric substances (EPS) of sludge and reducing its compressibility. However, when incineration is the intended disposal purpose, this method poses challenges such as incomplete combustion, equipment corrosion, secondary pollution, and decreased calorific value of sludge cake. In contrast, freeze-thaw conditioning, coupled with sawdust as a high-calorific-value bio-waste, emerges as an efficient and clean alternative. The research investigates the synergistic effects of freeze-thaw and sawdust co-conditioning on various sludge properties, including dewaterability, compressibility, consolidation, permeability, microscopicity, and calorific value. The study reveals that the combined conditioning significantly reduces water content and compressibility while increasing void ratio, consolidation, permeability, and enhancing the calorific value of the sludge cake. Specifically, sludge cake conditioned with 60% dried solids (DS) sawdust and freeze-thaw achieved a water content (Wc) of 49.07% and a calorific value of 1422.3 kcal/kg, meeting standards for self-sustained incineration. With heat recovery, the combined conditioning generates an economic revenue of 25.1 $/t DS after deducting costs, thereby reducing the overall cost of sludge reduction treatment. This research offers a clean and practical solution for sludge incineration and reduction, demonstrating great economic value and application potential.

The mechanism of solid acid-catalyzed bamboo sawdust liquefaction under polyol systems.

Solid acid catalysts are widely used in the field of biomass catalytic conversion owing to their advantages of low environmental pollution, easy separation and reusability. Nevertheless, there are relatively few studies on the mechanism of solid acid liquefaction for biomass. In this study, the effect of acid strength and acid amount of various solid acids on the liquefaction efficiency has been investigated using waste bamboo sawdust generated from the pulp and paper industry as the raw material. In addition, the physicochemical changes of cellulose, hemicellulose and lignin during the reaction process of bamboo sawdust have been studied, and the liquefaction mechanism of bamboo sawdust under the action of various solid acids has been concluded. As a result, the liquefaction efficiency of bamboo sawdust under the polyol system of PEG400/propanetriol is mainly related to the acid strength of the solid acid, and the greater the acid strength of the solid acid, the better the catalytic effect on the bamboo sawdust, in which the residual amount of bamboo sawdust liquefaction catalyzed by the SPA catalyst is only 17.72%. Noteworthy, the most difficult component to liquefy is the crystallization of natural cellulose I into cellulose II during the reaction process, which is the primary obstacle to the complete liquefaction of bamboo sawdust by solid acid. Overall, these findings are valuable for the high value utilization of waste bamboo sawdust in the pulp and paper industry, as well as the application of solid acid catalytic technology for biomass.