Outcomes and prognostic factors of endodontically treated teeth filled with calcium silicate- or epoxy resin-based root canal sealers: A retrospective cohort study.

AIM: The objectives of this study were to compare the clinical outcomes of root canal treatment between calcium silicate-based sealer using the cold hydraulic condensation technique and epoxy resin-based sealer using warm vertical compaction and to identify the prognostic factors affecting the outcomes of both obturation techniques. METHODOLOGY: Dental records and radiographs of the teeth that received root canal treatment with calcium silicate-based sealer using the cold hydraulic condensation technique or epoxy resin-based sealer using warm vertical compaction during 2015-2021 were selected using inclusion and exclusion criteria. The cases were matched between the two groups based on four factors: primary root canal treatment or retreatment, tooth type, periapical lesion and its size and extension of root canal filling. The success rates of root canal treatment between two sealers/obturation techniques were analysed. The incidence and resorption of extruded sealer were evaluated using the McNemar's test. Generalized estimated equations were used to evaluate any prognostic factors. RESULTS: The median recall period of this study was 15 months. A total of 234 teeth, comprising 117 cases in each sealer/obturation group, were included. No significant difference was found in the success rates between the calcium silicate-based sealer using the cold hydraulic condensation technique group (91.5%) and the epoxy resin-based sealer using the warm vertical compaction group (94.9%). The incidence of sealer extrusion for the calcium silicate-based sealer (27.6%) did not significantly differ from that of the epoxy resin-based sealer (36.2%), with both sealers typically demonstrating no resorption at recalls. No prognostic factors related to the success rate of either technique were detected. CONCLUSION: The study findings suggest no difference in the success rate between calcium silicate-based sealer and epoxy resin-based sealer. The study did not identify any prognostic factors that significantly influenced the outcomes of the endodontic treatments.

Quality of Root Canal Filling in Curved Canals Utilizing Warm Vertical Compaction and Two Different Single Cone Techniques: A Three-Dimensional Micro-Computed Tomography Study.

Statement of the Problem: Successful endodontic treatment depends on three-dimensional (3D) root canal filling to prevent the leakage of residual bacteria. Different obturation techniques with different sealers should be compared by employing advanced assessment tools. Purpose: This study compared the obturation quality of warm vertical compaction (WVC) and two different single-cone (SC) techniques using micro-computed tomography (micro-CT). Materials and Method: Thirty-three extracted maxillary molars with mesial root canal curvature of 20‒40º were prepared in vitro with One-Curve files and randomly assigned to three groups (n=11) for root canal obturation with WVC, SC technique with AH Plus sealer (SC-AH), or SC technique with SureSeal bioceramic (BC) sealer (SC-Su). The root canals underwent micro-CT examinations before and after obturation to determine the volume percentages (VPs) of voids and gaps at different distances from the apex (coronal, middle, and apical thirds). Data were analyzed by Kruskal-Wallis and Mann-Whitney U tests. Results: The highest VP of voids and gaps was recorded in the SC-Su group, with no significant difference from other groups (p> 0.05). There were significant differences in VP of gaps at different distances from the apex (p<0.05). The VPs of gaps in the apical third of all the samples were significantly higher than in the coronal and middle thirds. However, the difference in VP of voids was not significant at different distances from the apex (p>0.05). Conclusion: None of the tested techniques could provide a void-free and gap-free filling. The apical third of the canals showed the highest VP of gaps in all obturation techniques.

Bacterial sealing ability of calcium silicate-based sealer for endodontic surgery: an in-vitro study.

BACKGROUND: Apical surgery with standard retrograde maneuvers may be challenging in certain cases. Simplifying apical surgery to reduce operating time and streamline retrograde manipulation is an emerging need in clinical endodontics. AIM OF THE STUDY: The aim of the study was to compare the bacterial sealing ability of a calcium silicate-based sealer with the single cone technique combined with root end resection only, and calcium silicate-based sealer as a retrograde filling versus MTA retrofilling, and to analyze bacterial viability using confocal laser scanning microscope (CLSM). MATERIALS AND METHODS: In this in vitro experimental study, 50 extracted human maxillary incisor teeth were instrumented and randomly divided into five groups: three experimental groups, a positive control group, and a negative control group (n = 10/group). In the experimental groups, the roots were obturated using the single cone technique (SCT) and a calcium silicate-based sealer. In group 1, the roots were resected 3 mm from the apex with no further retrograde preparation or filling. In groups 2 and 3, the roots were resected, retroprepared, and retrofilled with either a calcium silicate-based sealer or MTA, respectively. Group 4 (positive control) was filled with a single gutta-percha cone without any sealer. In group 5 (negative control), the canals were left empty, and the roots were sealed with wax and nail varnish. A bacterial leakage model using Enterococcus faecalis was employed to assess the sealing ability over a 30-day period, checking for turbidity and analyzing colony forming units (CFUs) per milliliter. Five specimens from each group were examined using CLSM for bacterial viability. Data for the bacterial sealing ability were statistically analyzed using chi-squared and Kruskal-Wallis tests. RESULTS: The three experimental groups did not show significant differences in terms of bacterial leakage, or bacterial counts (CFUs) (P > 0.05). However, significant differences were observed when comparing the experimental groups to the positive control group. Notably, the calcium silicate-based sealer, when used as a retrofilling, yielded the best sealing ability. CLSM imaging revealed viable bacterial penetration in all the positive control group specimens while for the experimental groups, dead bacteria was the prominent feature seen. CONCLUSION: Within the limitations of this study, it could be concluded that the bacterial sealing ability of calcium silicate-based sealer with the single cone technique combined with root end resection only and calcium silicate-based sealer as a retrograde filling were comparable with MTA retrofilling during endodontic surgical procedures.

Three-Dimensional Measurement of Obturation Quality of Bioceramic Materials in Filling Artificial Internal Root Resorption Cavities Using Different Obturation Techniques: An In Vitro Comparative Study.

INTRODUCTION: Pathologic conditions such as internal root resorption (IRR) may complicate root canal filling. This study aimed to evaluate and compare the obturation quality by measuring the percentage of obturation volume (POV) in root canals with artificial IRR obturated with different materials and techniques using cone beam computed tomography (CBCT). METHODS: Forty single canal extracted mandibular premolars were decoronated to standardize their length to 14 mm. Following instrumentation, the roots were cut horizontally, and artificial IRR cavities were made at the level of 7 mm from the apex. The root halves were joined using cyanoacrylate adhesive. The samples were randomly assigned to 4 groups (n = 10), and the canals were filled as follows: single-cone technique (SC), bulk-fill Bio-C Sealer (BF), and Bio-C Repair for the coronal and middle third (BCR) + cold lateral condensation technique (CLC) for the apical third and continuous wave compaction technique (CWC). The pre- and postobturation volumes and the POV were measured in the total canal and for the apical, middle, and coronal thirds separately using CBCT and Mimics Medical software. The results were analyzed statistically using one-way ANOVA and Tukey HSD test, and statistical significance was set at P < .05. RESULTS: BF group resulted in significantly lower total, coronal, middle and apical POV values compared to SC, BCR + CLC, and CWC groups (P < .05), respectively. Also, at the apical third, the BCR + CLC group showed significantly lower POV than the SC and CWC groups (P < .05), respectively. The intra-group comparison showed that BF and BCR + CLC groups had a significantly lower POV in the apical third compared to the middle third (P < .05). Conversely, the CWC group had a significantly higher apical POV than the middle third (P < .05). CONCLUSIONS: The maximum POV was obtained using the CWC technique, Bio-C Repair, and SC technique with Bio-C Sealer, making their application in IRR more preferable than the BF Bio-C Sealer.

Effect of the Modified Methacrylate-Based Root Canal Sealer in Single-Cone Technique.

This study aimed to modify EndoREZ with 2.5% dimethylaminododecyl methacrylate (DMADDM) and 1% magnetic nanoparticles (MNP) to study its sealing property, penetration and long-term antibacterial and therapeutic effect in the single-cone technique (SCT) compared with EndoREZ and iRoot SP. Thirty single-root human maxillary premolars were assigned into three groups and obturated with three different root canal sealers by SCT. Every specimen was then scanned using micro-CT to analyze void fraction, and void volumes and confocal laser scanning microscope (CLSM) was used to study the dentin penetration. The long-term antimicrobial effects were tested in vitro before and after aging 1 and 4 weeks by the single-strain Enterococcus faecalis biofilm model. In addition, the beagle canine model of apical periodontitis (AP) was utilized to judge and compare the therapeutic effect of three sealers in SCT. The void fraction and void volumes of the modified root canal sealer were not significantly different from iRoot SP (p > 0.05) but were lower than EndoREZ (p < 0.05). The modified root canal sealant displayed a greater penetration, long-term antibacterial property, and treatment effect than the other groups (p < 0.05). This indicated that after being modified with DMADDM and MNP, it showed better performance in SCT.

Clinical outcome of bioceramic sealer iRoot SP extrusion in root canal treatment: a retrospective analysis.

BACKGROUND: During the obturation procedure, sealer extrusion occurs in some cases. iRoot SP is a kind of bioceramic sealer with superior physicochemical and biological properties. This article reports the outcome of iRoot SP extrusion in root canal treatment and the potential factors associated with the outcome. METHODS: Ninety-nine patients and one hundred and eighty-five teeth treated between 2014 and 2020 were included in this retrospective study. All of the cases were filled with a single-cone technique and the iRoot SP sealer. The minimum follow-up visit period was 1 year. The outcome was evaluated by clinical examination and radiographic examination at recall and was classified as healed, healing (success), or not healed (failure). RESULTS: The overall success rate of all teeth was 96.8%. The success rate of adequately filled teeth was 97.3%, while that of iRoot SP extrusion was 95.8%; the difference was not statistically significant. Factors such as gender, age, tooth position, follow-up visit period, size of periapical lesion, treatment type and extruding sealer amount had no influence on the outcome of iRoot SP extruded teeth. CONCLUSIONS: The results suggested that iRoot SP extrusion has no adverse effect on the outcome of root canal treatment, which may contribute to the endodontic treatment.

Root-end resection with or without retrograde obturation after orthograde filling with two techniques: A micro-CT study.

To evaluate the filling ability of two orthograde obturation techniques followed by the apical resection with or without retrograde obturation through micro-computed tomography (CT). Thirty-two single-rooted permanent teeth were prepared and randomised into four groups (n = 8) according to the orthograde obturation technique (single cone technique [SCT] and mineral trioxide aggregate placement) combined or not with retrograde obturation. The volume of voids (VoV) within the entire endodontic space, the apical 3 mm, and 1 mm after root resection was calculated by micro-CT. Statistical analysis showed no significant difference among the groups regarding the total VoV in all root canals, as well as within the apical 1 mm after root resection. The SCT and apical resection without retrograde filling showed significantly better results in terms of VoV at the apical 3 mm after root resection. Within the study limitations, SCT associated with apical resection without retrograde preparation exhibited a similar or less amount of voids than the other groups.

Comparison of Fracture Resistance between Single-cone and Warm Vertical Compaction Technique Using Bio-C Sealer® in Mandibular Incisors: An In Vitro Study.

AIM: The aim of the study was to compare the fracture resistance of the single-cone technique with the warm vertical compaction technique (WVCT) in mandibular incisors using Bio-C sealer®, by applying a compressive force using a universal testing machine (UTM) (Instron 5943; Instron, Norwood, Massachusetts, USA). MATERIALS AND METHODS: Twenty-two mandibular incisors were selected and divided into two groups after applying the same shaping protocol. To assess the influence of the wave vertical compaction technique on the fracture resistance, the first group was obturated by a single-cone obturation technique (SCOT) (n = 12), and the second group was obturated with a WVCT (n = 10). Bio-C sealer® (Angelus, Hague Netherlands) was used in the two obturation techniques. Wax-coated roots were put in an acrylic mold and loaded to compressive strength fracture in a mechanical material testing machine (UTM) (Instron 5943; Instron, Norwood, Massachusetts, USA), with Bluehill 3 software (version 3.15.1343) recording the maximum load at fracture. Fracture loads were compared statistically, and data were examined with the Mann-Whitney U test with a level of significance set at p ≤0.05. RESULTS: No statistically significant difference was registered between the SCOT (264.97 ± 83.975 N) and WVCT (313.35 ± 89.149 N) concerning the endodontically treated mandibular incisors' fracture resistance (p = 0.159). CONCLUSION: Warm vertical compaction technique (WVCT) did not affect the fracture resistance of endodontically treated mandibular incisors when compared to SCOT canal preparation. CLINICAL SIGNIFICANCE: General practitioners and endodontists face challenges during root canal treatment such as cracks and root fractures. This article aims to guide experts in choosing between the single-cone and the continuous WVCT aiming for higher long-term quality of root canal filling.

Retreatability of calcium silicate-based root canal sealer using reciprocating instrumentation with different irrigation activation techniques in single-rooted canals.

This study analysed the bioceramic sealer cleaning ability of two chemo-mechanical systems in intact and restored teeth. Thirty-two single-rooted teeth were used, and half of them restored with a pre-endodontic composite restoration (PCR). All samples were instrumented with a size 40 Reciproc Blue file and filled with BioRoot RCS. Canals were retreated using the R40 and then R50 Reciproc Blue. The samples were divided into four experimental groups (n = 8): intact teeth/passive ultrasonic irrigation (PUI) (G1), intact teeth/shock wave-enhanced emission photoacoustic streaming (SWEEPS) (G2), PCR/PUI (G3) and PCR/SWEEPS (G4). The samples were scanned by micro-CT before and after retreatment, and the volume of remaining filling material was evaluated. The minor percentage of residues were observed in G2, with a volume of 0.447 ± 0.356% of the endodontic space (P < 0.001). The Reciproc/SWEEPS technique showed the better performance in intact teeth compared with PUI technique. Pre-endodontic restoration did not significantly affect the effectiveness of sealer removal.

Comparison of Root Filling Quality of Two Types of Single Cone-Based Canal Filling Methods in Complex Root Canal Anatomies: The Ultrasonic Vibration and Thermo-Hydrodynamic Obturation versus Single-Cone Technique.

This study aimed to assess the effectiveness of ultrasonic vibration and thermo-hydrodynamic obturation (VibraTHO) using two types of root canal sealers, in comparison to the single-cone (SC) technique and a calcium silicate-based root canal sealer in complex root canal anatomies. Thirty single-rooted human maxillary premolars with two canals that had a complex root canal anatomy of transverse anastomoses or ramifications were prepared and assigned to the following three experimental groups, according to the filling method: SE group, SC technique with Endoseal TCS; VE group, VibraTHO with Endoseal TCS; and VG group, VibraTHO with GuttaFlow 2. Each tooth was scanned using micro-computed tomography, and the volume percentages of the filling material were calculated. The analysis of variance was used to analyze the statistical differences between the three groups (p < 0.05). The mean volume of the filling material was higher in the VG and VE groups than that in the SE group (p < 0.05) along the apical to middle-to-coronal thirds, and significant differences were observed between each root canal area (p < 0.05), with the only exception being at the apical thirds between the VE and SE groups. The VibraTHO technique using GuttaFlow 2 can be a more effective root canal filling method for anatomically complex root canal systems than the SC technique with Endoseal TCS. On the other hand, the VibraTHO technique using Endoseal TCS has a limited effect on improving the quality of the root filling at the apical portion of anatomically complex root canal systems, compared to the SC technique with Endoseal TCS.

Micro-computed Tomographic Evaluation of the Quality of Root Canal Fillings in Mandibular Molars after Obturation for 54 Months.

INTRODUCTION: The present study evaluated the percentage volume of voids in root canals of mandibular molars that had been obturated for 54 months. METHODS: Thirty extracted human mandibular molars were instrumented and debrided. The teeth were assigned to 3 groups (n = 10) according to the filling technique and sealer used: the single-cone technique using AH Plus sealer (AHS; Dentsply Sirona Endodontics, Tulsa, OK) or EndoSequence BC sealer (BCS; Brasseler USA Dental LLC, Savannah, GA) and the warm vertical compaction technique using AH Plus sealer (AHW). The specimens were stored at 37°C and 100% humidity. Micro-computed tomographic imaging was used to scan each specimen 1 day 54 months after obturation. Data were analyzed using 1-way analysis of variance and the paired t test. RESULTS: The percentage volume of voids in the teeth 1 day after obturation in the AHS group was higher than in the BCS group and the AHW group (P < .05). After 54 months, the proportion of voids decreased in all groups (P < .05). No significant difference was observed between the AHS group and the BCS group after 54 months. Teeth in the AHW group contained fewer voids than the AHS group (P < .05). CONCLUSIONS: Voids in root canal filling were reduced 54 months after obturation. The warm vertical compaction technique achieved better root canal filling quality in mandibular molars than the single-cone technique when using AHS after long-term storage at 100% humidity.

Comparison of dentin penetration ability of different root canal sealers used with different obturation methods.

This in vitro study aimed to investigate the tubular penetration depth of four different sealers used with two different obturation methods in the apical, middle, and coronal root canal dentin. Eighty-four single-rooted teeth were instrumented until the F4 ProTaper universal rotary file and filled with AH26, AH Plus (Dentsply, DeTrey, Konstanz, Germany), RealSeal (SybronEndo, Orange, CA), and MTA Fillapex (Angelus, Londrina, Brazil) using cold lateral condensation (CLC) and single-cone (SC) obturation techniques. Thereafter, the roots were sectioned longitudinal and prepared for scanning electron microscope evaluation. The maximum and minimum sealers penetration depth into dentinal tubules at the apical, middle, and coronal regions and the average depth of sealer penetration were calculated. The data was statistically analyzed two-way ANOVA and post hoc Tukey and Dunnett tests and independent samples t test using maximum mean values. There was no statistically difference between the obturation methods (p > .05). When the sealers are evaluated within themselves AH26 was affected by obturation methods significantly (p < .05). Also the results revealed a significant difference between root regions (p < .05). AH26 and RealSeal root canal sealers had the highest penetration values with CLC and SC obturation techniques, respectively. The obturation method did not affect the penetration amount of root canal sealers. RealSeal root canal sealer performed better penetration ability than the other sealers. Apical third of the root in all groups showed lowest penetration depth.

Micro-computed tomography evaluation of root canal filling quality with apical negative pressure.

OBJECTIVES: The objective of the present study was to compare, using micro-computed tomography (micro-CT), the location and volume percentage of voids in root canals that were obturated with a premixed tricalcium silicate sealer and a single gutta-percha master cone, in the presence or absence of apical negative pressure. METHODS: Twenty extracted human mandibular premolars were cleaned and shaped. The teeth were assigned to 2 groups (n = 10) according to the filling technique: apical negative pressure sealer application combined with the single-cone technique (NPS) or syringe-assisted sealer application combined with the single-cone technique (SS). Each specimen was scanned using micro-CT at 10 µm resolution. The percentages of voids were calculated from segmental regions of interest. Data were analysed using nonparametric statistical methods, with statistical significance pre-set at α = 0.05. RESULTS: Significant difference was identified (p < 0.05) in the overall percentage of voids between the NPS group (0.33 %; interquartile range 0.25 %) and the SS group (6.29 %; interquartile range 5.57 %). In the NPS group, the percentages of voids in the coronal-third or middle-third of the canal space were statistically lower than that in apical-third (p < 0.0167, Bonferroni adjustment), with no significant difference between the former two groups. In the SS group, no significant difference in the percentages of voids was identified among the coronal-third, middle-third and apical-third of the canal space. CONCLUSIONS: Apical negative pressure sealer application combined with the single-cone technique produces fewer voids in root canal fillings than the conventional single-cone technique. CLINICAL SIGNIFICANCE: The apical negative pressure sealer application technique combined with single-cone filling constitutes a novel root canal obturation technique that improves the quality of root canal filling by minimising the volume of voids within the three-dimensional canal space.

Apical displacement and residual root canal filling with single-cone after post space preparation: a micro-ct analysis

Abstract The purpose of this study was to evaluate the presence of residues after post space preparation (PSP) and establish whether the apical displacement of the gutta-percha was affected by the moments and methods of PSP in teeth filled by the single-cone technique. The root canals of 20 bovine incisor teeth were instrumented with Reciproc and filled with single-cone and AH Plus. The specimens were divided into 4 groups according to the moment and method of PSP (n=5): immediate with drill, immediate with thermoplasticizer, delayed with drill and delayed with thermoplasticizer. Micro-CT scans were performed before and after the PSP for residues of the root canal filling (1) and analysis of apical displacement (2). Data were analyzed by using 2-way repeated measurement ANOVA (1) and 2-way ANOVA (2) followed by the Tukey's test (a=0.05). Significance effect on the residues percentage remaining for methods (p=0.044), for moments (p=0.006), for thirds repetition (p<0.001), and for interaction between methods and thirds (p<0.001), and moments and thirds (p=0.044). Significance effect on the apical displacement of root canal filing was detected for methods (p=0.008), however no difference was found between moments (p=0.617). In general, PSP using drill resulted in more homogeneous root canal preparation, mainly when made immediately. For all other combinations between methods and moments for PSP, the middle and apical thirds presented significant higher residues remaining. Thermo method performed in both moments and the drill method performed immediately had displacement in the apical direction, representing extrusion of the root filling material.

Resumo O objetivo deste estudo foi avaliar a presença de resíduos após o alívio do canal (AC) e verificar se o deslocamento apical da guta-percha foi afetado pelos momentos e métodos de AC em dentes obturados pela técnica do cone único. Os canais radiculares de 20 dentes incisivos bovinos foram instrumentados com Reciproc e obturados com cone único e AH Plus. As amostras foram divididas em 4 grupos de acordo com o momento e método de AC (n=5): broca imediato, termocompactador imediato, broca tardio e termocompactador tardio. Escaneamentos em micro-CT foram realizados antes e após o AC para análise dos resíduos da obturação (1) e do deslocamento apical (2). Os dados foram analisados empregando ANOVA em 2 fatores com medida repetida (1), ANOVA em dois fatores (2), seguidas do teste de Tukey (α=0,05). A porcentagem de resíduos remanescentes foi influenciada pelos métodos (p=0,044), momentos (p=0,006), pelo fator de repetição terços do canal (p<0,001), e pelas interações entre métodos e terços (p<0,001), e momentos e terços (p=0,044). Já para o deslocamento apical da obturação do canal radicular foi detectada influência significativa para os métodos (p=0,008), no entanto, nenhuma diferença foi encontrada entre os momentos (p=0,617). Em geral, AC usando brocas resultou em preparo mais homogêneo dos canais radiculares, principalmente quando realizado imediatamente após a obturação. Para todas as outras combinações entre métodos e momentos de AC, o terço médio e apical apresentaram significativamente maiores resíduos remanescentes. O método termo realizado nos dois momentos e o método broca de preparo realizado imediatamente resultaram em deslocamento na direção apical, representando a extrusão do material de obturação no canal radicular.

An international survey on the use of calcium silicate-based sealers in non-surgical endodontic treatment.

OBJECTIVES: To gain insight on the current clinical usage of bioceramic root canal sealers (BRCS) by general dental practitioners (GDPs) and endodontic practitioners (EPs) and to determine if BRCS clinical application is in accordance with the best available evidence. MATERIAL AND METHODS: An online questionnaire of 18 questions addressing BRCS was proposed to 2335 dentists via a web-based educational forum. Participants were asked about socio-demographic data, clinical practice with BRCS, and their motivation for using BRCS. Statistical analysis (chi-squared test or Fisher's exact test) was applied, as appropriate, to assess the association between the variable categories (p value < 0.05). RESULTS: The response rate was 28.91%. Among respondents, 94.8% knew BRCS (EPs more than GDPs, p < 0.05) and 51.70% were using BRCS. The primary reason for using BRCS was their belief of its improved properties (87.7%). Among BRCS users, single-cone technique (SCT) was the most employed obturation method (63.3%) which was more applied by GDPs (p < 0.05); EPs utilized more of the thermoplasticized obturation techniques (p < 0.05). A proportion of 38.4% of BRCS users indicated the usage of SCT with BRCS regardless of the root canal anatomy (GDPs more than EPs p < 0.05) and 55.6% considered that BRCS may influence their ability to re-establish apical patency during retreatment (GDPs more than EPs p < 0.05). CONCLUSIONS: This study highlights wide variation in the clinical use of BRCS which is not in accordance with the current literature. CLINICAL RELEVANCE: This inconsistency among EPs and GDPs on BRCS clinical application requires further clarifications to better standardize their use and improve their future evaluation.

The effect of obturation techniques on the push-out bond strength of a premixed bioceramic root canal sealer.

OBJECTIVES: The aim of the study was to evaluate the effect of obturation techniques on the push-out bond strength of a premixed bioceramic (TotalFill BC) root canal sealer to root canal dentin surface. METHODS: The palatal root canal of sixty extracted human maxillary first premolar were prepared with Mtwo rotary system, teeth were divided into two groups; according to the sealer to be obturated with; TotalFill BC sealer and AH Plus sealer. Each group was then divided into three subgroups (n = 10) according to the obturation technique; cold lateral compaction, single cone, and warm vertical compaction. After obturation teeth were stored in an incubator for two weeks. Three slices of 1.5 mm thickness were then obtained from each root. Bond strength of obturation materials to root dentine was measured using push-out test by universal testing machine. Data were analyzed using ANOVA followed by Tukey's test. Mode of failure was determined by optical microscope examination. RESULTS: Overall, the push-out bond strength of TotalFill BC sealer was significantly higher than that of AH Plus sealer (P < 0.001). The obturation technique had no significant effect on the bond strength of TotalFill. While the bond strength of AH Plus was significantly affected, warm vertical compaction and single cone groups displayed lower bond strength than cold lateral compaction group (P < 0.05). Mixed mode of failure was most predominant in all groups. CONCLUSIONS: TotalFill BC sealer showed a higher push-out bond strength than AH Plus sealer, and the obturation technique significantly affected AH Plus sealer but not the TotalFill. CLINICAL SIGNIFICANCE: Warm vertical compaction significantly reduced the bond strength of the resin based AH Plus sealer compared to cold lateral compaction, but this was not significant with the bioceramic TotalFill BC sealer. Single cone technique could be used with bioceramic sealer which make the obturation faster and easier.

Efficacy and retrievability of root canal filling using calcium silicate-based and epoxy resin-based root canal sealers with matched obturation techniques.

This study aimed to compare the efficiency of root canal filling procedures and the retrievability of the filling material with various sealers. Forty-three patients assigned to endodontic treatment with (i) continuous wave of condensation technique (CTW) with AH-plus (ii) single-cone technique (SCT) with EndoSeal MTA. The spent time, voids entrapping and postoperative symptoms were evaluated. To evaluate the retrievability, mandibular premolar (n = 60) were divided into four groups: AH-plus/CTW, EndoSeal MTA/SCT, MTA Fillapex/SCT and EndoSequence BC Sealer/SCT. The time required removing the filled materials and remnant score were examined. EndoSeal MTA/SCT showed significantly shorter time of filling procedure. The number of void did not show significant differences between two techniques. No patients showed clinical signs during the follow-up periods. There were no significant differences between group AH-plus and EndoSeal MTA for remnant score. A certain calcium silicate-based sealer with SCT may give similar clinical efficiencies as much as continuous-wave technique using AH-plus sealer.

Apically extruded debris during the removal of canal filling material from root canals using three techniques.

AIM: In the present study, we evaluated the effect of the single-cone technique (SCT), cold lateral compaction (CLC), and wave vertical compaction (WVC) technique performed using two different sealers on the amount of apically extruded debris (AED) produced during the removal of canal filling material. METHODS: Ninety extracted mandibular premolars were prepared with ProTaper instruments. The teeth were then randomly assigned to six groups (N = 15) for root canal filling: (a) group 1, CLC+AH Plus; (b) group 2, SCT+AH Plus; (c) group 3, WVC+AH Plus; (d) group 4, CLC+MTA Fillapex; (e) group 5, SCT+MTA Fillapex; and (f) group 6, WVC+MTA Fillapex. In all groups, the removal of canal filling material was performed with ProTaper retreatment instruments. The mean weight of the AED was assessed with an analytical balance. RESULTS: The amount of AED was lowest in groups 2 and 5 (P < .05), with no difference between these groups (P > .05). Groups 3 and 6 produced the greatest amount of extruded debris (P < .05); there was no difference between these groups (P > .05). Additionally, there was no difference between groups 1 and 4 (P > .05). There was no significant difference among the groups regarding sealer type (P > .05). CONCLUSIONS: The canal filling technique used affected the amount of AED produced during the removal of canal filling material, but not sealer type.

Comparison of the Percentage of Voids in the Canal Filling of a Calcium Silicate-Based Sealer and Gutta Percha Cones Using Two Obturation Techniques.

This study evaluated the root-filling quality of a calcium silicate-based sealer and gutta percha (GP) cones by measuring the percentage of voids. Twenty artificial molar teeth were divided into two groups: one obturated using the single-cone (SC) technique, and the other using the continuous wave (CW) technique. Obturation was performed with GP cones and Endoseal MTA (mineral trioxide aggregate, Maruchi, Wonju, Korea). Obturated teeth were scanned using microcomputed tomography, and the percentage of void volume was calculated in the apical and coronal areas. A linear mixed model was used to determine the differences between the two techniques (p < 0.05). The percentage of voids between the filling materials and root canal walls was not significantly different between the two obturation methods (p > 0.05), except for the CW group, which demonstrated a significantly higher void volume in the coronal area of the distal canal (p < 0.05). The percentage of voids inside the filling material was significantly higher in the CW groups for all of the comparisons (p < 0.05), except in the apical area of the distal canal (p > 0.05). The voids between the filling material and canal wall in the apical area were not significantly different between the two techniques.

Technical quality of a matching-taper single-cone filling technique following rotary instrumentation compared with lateral compaction after manual preparation: a retrospective study.

OBJECTIVES: The objectives of the study were to evaluate the radiographic technical quality of root canal treatment before and after the implementation of a nickel-titanium rotary (NiTiR) preparation followed by a matching-taper single-cone (mSC) obturation and to detect the procedural errors associated with this technique. MATERIALS AND METHODS: A random sample of 535 patients received root canal treatment at the Department of Conservative Dentistry and Periodontology at the University of Würzburg: 254 teeth were treated in 2002-2003 by using stainless steel instruments (SSI) for preparation and a lateral compaction (LC) technique (classic group (CG)). Two hundred eighty-one teeth were root filled in 2012-2013 employing NiTiR instruments for the root canal shaping and a mSC technique (advanced group (AG)). The quality assessments were based on the radiographic criteria of the European Society of Endodontology. The presence of voids was recorded separately for the apical, central and cervical thirds of the root canals. Procedural errors, such as ledges, apical transportations, perforations and fractured instruments, were detected. The root canal fillings in the CG and AG were compared using chi-squared and Fisher's exact tests. Multivariable logistic regression was performed to investigate the association between the independent variables (patient age, tooth type and type of treatment) and the dependent variables (density and length). RESULTS: Adequate length was achieved significantly more often in the AG compared to the CG for molars (p = 0.017), mandibular teeth (p = 0.013) and primary root canal treatments (p = 0.024). No significant difference was detected between the AG and CG regarding adequate length in general (p = 0.051) or adequate overall quality of root canal filling (p = 0.1). In the AG, a significant decrease in procedural errors was evident (p = 0.019) and decreases in the densities of the root canal fillings in the cervical (p = 0.01) and central (p = 0.01) thirds of the root canals were also observed. Moreover, root canals in elderly patients exhibited fewer voids (p = 0.009). CONCLUSIONS: Rotary root canal preparation followed by a matching-taper single-cone filling technique provides a reliable shaping of the root canal, with fewer procedural errors and a more acceptable filling quality in terms of length and homogeneity in the apical third. Less favourable results were achieved in the central and cervical parts of the root canals. CLINICAL RELEVANCE: The matching-taper single-cone technique seems to effectively obturate well-tapered root canals after adequate rotary instrumentation. Irregularly shaped canals require additional lateral or warm vertical condensation to avoid voids.