Non-consumable gamma-cyclodextrin additive constructing anti-solvation interphase realizing dendrites free and high-performance lithium metal batteries.

Relying on surpassing high theoretical capacity (3,865 mAh/g) and the lowest relative electrode potential (0 V vs. metallic Li), lithium metal batteries (LMBs) have been regarded as the "holy grail" of next-generation energy storage technology. Whereases, the instability of pristine solid electrolyte interphase (SEI) layers and the disorderly growth of lithium dendrites are still significant challenges to the commercialisation of LMBs. In this study, a novel approach is introduced to homogenise Li deposition by incorporating an environmentally friendly electrolyte additive, gamma-cyclodextrin (γ-CD), in ether-based electrolytes. Through host-guest interactions, γ-CD additives not only form inclusion complexes to improve Li+ transference number to 0.86 but also encapsulate TFSI- anions and other solvent molecules within the "cavity effect" to relieve unfavourable solvent effect. Electrochemical characterisations demonstrate that introducing 1 wt% γ-CD elevates the oxidation decomposition voltage of ether electrolytes to 4.15 V, thereby inhibiting the decomposition of ether electrolytes and reducing the fracture of SEI layers. According to reduce the nucleate potential, the Li//Cu half battery exhibits improved stability for 100 cycles, with an improved average Coulombic efficiency (CE) maintained above 98.4 %. Even if applied at high current densities of 5.0 mA cm-2 for a capacity of 1.0 mAh cm-2, the Li//Li symmetric battery can cycle for over 800 h, and the Li//Li4Ti5O12 (LTO) full battery retains 98.8 % of the initial capacity after 1,400 cycles.

Unveiling Eco-Friendly Reverse Micelle Systems: Dimethyl Carbonate as a Novel Biocompatible Solvent.

In this study, we systematically explored the characteristics of dimethyl carbonate (DMC)/sodium 1,4-bis-2-ethylhexylsulfosuccinate (AOT) reverse micelles (RMs) in the presence of water using dynamic light scattering (DLS), proton nuclear magnetic resonance (1H NMR), and molecular probes. DMC, a biocompatible solvent, enables the formulation of AOT RMs without the need for a co-surfactant. DLS revealed that as the water content increased, the droplet sizes grew larger. 1H NMR studies indicated that at low water content, water molecules interacted with DMC via hydrogen bonding. This interaction promoted the penetration of DMC toward the interface, affecting the solvation of AOT's sulfonate group. At higher water content, a competition for hydrogen bonding emerged between water-water and water-surfactant molecules, leading to distinct interfacial properties, as evidenced by molecular probes. The critical micellar concentration for DMC/AOT/water RMs was 7x10-3 M, similar to RMs formed with other biocompatible solvents. The presence of water facilitated the solvation of the surfactant's polar regions, promoting the RMs formation. The polarity of this system was measured using the ET(30) value. This novel micellar system holds significant potential in various fields, including catalysis, nanomaterials, and green chemistry.

Effect of Extracting Solvent on the Quality of Lentinula edodes Oil Based on Chemical Composition, in vitro Antioxidant Activity and Correlation Analysis.

In this study, effects of 4 solvents (petroleum-ether, n-hexane, ethyl-acetate, and chloroform) on the chemical characterizations and in vitro antioxidant capacities of oil were assessed to determine the optimal extraction solvent for L. edodes oil. Three data analysis techniques including principal component analysis, hierarchical cluster analysis, and multiple linear regression, were applied to determine the relationship between the nutrient and antioxidant capacity. The results showed that chloroform extracted L. edodes oil exhibited the largest amount of α-tocopherol, flavones, and unsaponifiable matter, chloroform was thus confirmed desirable for extracting L. edodes oil rich in nutrition. While based on the best DPPH and ABTS, the ethyl-acetate extracted oil show the strongest antioxidant property. More than that, the results also showed that different extraction solvents could induce large variations in minor components and free radical scavenging activity among the test oils, and the total phenol content was found positively correlated to the antioxidant capacity of L. edodes oil, which could be well predicted by all MLR models. These findings revealed the influence of solvent on the chemical characterization and in vitro antioxidant capacity of L. edodes oil, providing a theoretical foundation for future applications of L. edodes oil.

A Visible-Light-Responsive Fluorescent Diarylethene Having a Betaine Structure.

As a new molecular scaffold of photoswitchable fluorophore, we developed a photochromic diarylethene containing a betaine structure based on pyridinium N-enolate. A facile reaction of a pyridyl-substituted dithienylperfluorocyclopentene derivative with octafluorocyclopentene constructed the betaine structure. The introduction of the betaine moiety provided the diarylethene molecule with bathochromically shifted optical absorption and fluorescing ability, thus enabling the molecule to function as a visible-light-sensitive turn-off mode photoswitchable fluorophore. The molecule in the open-ring form emitted bright blueish green fluorescence. Upon irradiation with 405 nm light, the molecule underwent cyclization isomerization to form the closed-ring isomer and the fluorescence intensity significantly decreased. The turn-off mode fluorescence photoswitching was observed not only in solution but also in polymer films.

Vibrational spectroscopic interpretation, solvent effect and molecular docking studies of TAAR1 partial agonist RO5263397.

Density functional theory studies of TAAR1 (trace amine associated receptor 1) partial agonist RO5263397 carried out with precise and detailed spectroscopic investigation as well as validated experimentally. FT-IR, confocal Raman and UV-visible spectroscopic techniques were used to characterize the compound and corresponding theoretical calculations were carried out using DFT/B3LYP method with 6-311++G (d,p) basis set. Estimated and observed vibrational wavenumbers of the compound were assigned. UV-visible spectrum and FMOs (frontier molecular orbital) analysis reveals that the polarity affects the molecular reactivity and stability of the compound. Donor - acceptor interaction and second order perturbation energy have been explained using natural bond orbital analysis clarify the presence hydrogen bonds in the system. ELF and LOL studies visualises the localized and delocalized electrons in the title compound. RDG analysis evidences the various interactions present in the monomer and dimer of RO5263397. The structural importance of the compound were clearly examined using NMR spectral analysis. The existence of hydrogen bonding is validated by reactive site findings from Mulliken atomic charge distribution and molecule electrostatic potential surface studies. Information about distinct drug-receptor interactions obtained from molecular docking investigation offers the path of further study of molecular activity in various drug-receptor mechanism.

Supramolecular J- and H-Aggregation of Naphthalimide-Conjugated Dipeptide in Mixed-Solvent Systems and its Application in Cell Imaging.

In this work, a core-substituted NMI-conjugated dipeptide (4MNLV) was extensively studied in mixed solvent systems to explore the polarity effect on the self-assembly pattern and their photophysical property. 4MNLV adopted J- or H- type aggregation pattern depending upon the polarity index of the solvent system chosen. The self-assembly process was achieved through the anti-solvent effect. UV-vis study suggested that if the stock solution of 4MNLV was diluted with a relatively more polar solvent (compared to the stock solvent), then the system acquired J- type of aggregation pattern by showing a red-shift in their absorption maxima (λmax). Conversely, when the stock was diluted by a relatively less polar solvent, H-type of aggregation was observed, where blue shift of λmax was noticed. The emission spectra and the lifetime of the self-assembled materials were also influenced by the chosen solvent system. The chirotopic behaviour of these self-assembled materials was studied through CD spectroscopy. Morphological study indicated the formation of helical nanofibrillar structures. The bright green fluorescence of these highly biocompatible naphthalimide-peptide conjugate was used for cell imaging application, indicating its futuristic scope.

A comprehensive study on solvent effect and establishment of n-hexane solvent system based normal-phase liquid chromatography × reversed-phase liquid chromatography for isolation of natural products.

Reversed-phase liquid chromatography (RPLC) represents an effective separation method, and is widely employed as the second dimension in most 2D-LC systems. Nevertheless, the solvent effect of the eluent from the first dimension on RPLC presents a challenge to the online coupling of RPLC with other separation modes, particularly normal phase liquid chromatography (NPLC). To address this issue, a comprehensive understanding of the solvent effect is essential. Following a comprehensive investigation into the influence of diverse solvents on RPLC separations, it was observed that alkane solvents, such as n-hexane, exhibited a pronounced tendency to be retained during RPLC separations. Such solvents do not affect the analysis of samples with weaker retention abilities than themselves, even when a large injection volume is used. The solvent effect was thus reduced by employing n-hexane-based solvent dilution. Leveraging the markedly enhanced solvent tolerance and extensive injection volume in RPLC, a versatile integration of the NPLC and RPLC was devised, necessitating merely a purge pump and a 10 port 2 position valve in conjunction with two sample loops. The novel 2D-LC system was then deployed for the analysis of propolis, a naturally occurring complex sample, and demonstrated remarkable separation efficiency.

Synthesis, optical properties, DNA, ß-cyclodextrin interactions, and antioxidant evaluation of novel isoxazolidine derivative (ISoXD2): A multispectral and computational analysis.

ISoXD2 are well explored among versatile and outstanding class of pharmacophores for the preparation and discovery of drugs. Herein, the electronic absorption and emission spectra of ISoXD2 were investigated in three different solvents. The observed transition was attributed to π-π* with charge transfer character. Changes in the excited state and shift of the absorption and emission peaks to longer wavelengths are observed as a result of increasing solvent polarity, due to the interactions between the ISoXD2 molecule and the solvent molecules surrounding it. Changing the solvent confirms its solvatochromic effect. UV-vis and fluorescence analysis revealed that ISoXD2 binds to deoxyribonucleic acid (DNA) by intercalation mode, with a stoichiometric ratio of 1:1.5. Moreover, the fluorescence intensity of DNA bound to ethidium bromide (EB) in the presence of ISoXD2 was investigated. From this analysis, the Stern-Volmer quenching constant (Ksv), quenching rate constant (kq), binding constant (Kb) and binding sites number (n) were found to be 5.654 × 103 M-1, 2.827 × 1011 M-1 s-1, 3.81 × 104 M-1 and 1.225, respectively. The interaction between ISoXD2 and ß-CD was investigated through absorption spectra analysis. Kb for this interaction was determined to be 4.9 × 104 M-1. The free radical-scavenging ability of the prepared ISoXD2, examined by DPPH and ABTS assays have shown a good antioxidant activity. Furthermore, modeling study was conducted to explore their plausible binding mechanism with ISoXD2 and to support the experimental results.

Stationary External Electric Field-Mimicking the Solvent Effect on the Ground-State Tautomerism and Excited-State Proton Transfer in 8-(Benzo[d]thiazol-2-yl)quinolin-7-ol.

The effect of the external electric field on the ground-state tautomerism in 8-(benzo[d]thiazol-2-yl)quinolin-7-ol has been studied by using density functional theory. The compound exists as an enol tautomer (off state) and under the influence of the external electric field a long-range intramolecular proton transfer can occur, placing the tautomeric proton at the quinolyl nitrogen atom (on state). This is a result of the much higher dipole moment of the end keto tautomer and indicates that the external electric field can be used to mimic the implicit solvent effect in tautomeric systems. In the excited state, the further stabilization of the most polar on state leads to a situation when the excited-state intramolecular proton transfer becomes impossible, limiting the intramolecular rotation to the conical intersection region.

Visualization of Solvent Effect and Oxygen Content via a Red Room-Temperature Phosphorescent Material.

The development of pure organic room-temperature phosphorescent (RTP) materials greatly facilitates the integrated application of luminescent materials. Herein, a type of photoactivated red RTP material was constructed by simply doping 4-(benzo[c][1,2,5]thiadiazol-5-ylthio)benzonitrile (p-NNS) into a poly(methyl methacrylate) (PMMA) matrix. The obtained film realized a controllable photoactivation process by regulation of diverse solvent levels, demonstrating potential advantages in optical anti-counterfeiting applications. Furthermore, luminescent properties of the doped film were utilized to detect oxygen content from 2.00% to 4.90%, which revealed the exact consumption of ambient oxygen under UV light. Every CIE point of the luminescence corresponds to a certain oxygen content, illustrating the visualization of oxygen content. The remarkable regulation of solvent effect and oxygen content in this work will provide competitive material for further optical applications.

Synthesis of Carboxyl-Functionalized COFs with Alternate Stable ß-Ketoenamine and Benzimidazole Linkages: Unraveling Exceptional Solvent Effects for Efficient Uranium Separation.

The prevalent π-π interactions in 2D covalent organic frameworks (COFs) impart a certain flexibility to the structures, making the stacking of COF layers susceptible to external stimuli and introducing some structural disorder. Recent research indicates that the flexibility between COF layers and the associated disorder significantly influence their selective adsorption performance toward gas molecules. However, the adsorption process in a solution environment is more complex compared to gas-phase adsorption, involving interactions between adsorbents and adsorbates, as well as the solvation effects of flexible 2D COFs. Therefore, the inherent flexibility and disorder in 2D COFs under solution conditions and their impact on the adsorption performance of metal ions have not been observed yet. Herein, the synthesis of a novel carboxyl-functionalized COF featuring stable ß-ketoenamine and benzimidazole linkages, named DMTP-COOH, is presented. DMTP-COOH exhibits excellent selective adsorption capability for uranium, with significantly different adsorption capacities observed after treatment with different solvents. This notable difference in adsorption capacity is observed under varying pH, concentration, time, and even in the presence of multiple competing ions. This work represents the first observation of the significant impact of solvent soaking treatment on the selective adsorption performance of COFs for uranium under liquid conditions.

Renewing Interest in Zeolites as Adsorbents for Capture of Cationic Dyes from Aqueous and Ethanolic Solutions: A Simulation-Based Insight into the Efficiency of Dye Adsorption in View of Wastewater Treatment and Valorization of Post-Sorption Materials.

The impact of solvents on the efficiency of cationic dye adsorption from a solution onto protonated Faujasite-type zeolite (FAU-Y) was investigated in the prospect of supporting potential applications in wastewater treatment or in the preparation of building blocks for optical devices. The adsorption isotherms were experimentally determined for methylene blue (MB) and auramine O (AO) from single-component solutions in water and in ethanol. The limiting dye uptake (saturation capacity) was evaluated for each adsorption system, and it decreased in the order of MB-water > AO-water > AO-ethanol > MB-ethanol. The mutual distances and orientations of the adsorbed dye species, and their interactions with the oxygen sites of the FAU-Y framework, with the solvent molecules, and among themselves were inferred from Monte Carlo simulations and subsequently utilized to rationalize the observed differences in the saturation capacity. The dye-solvent competition and the propensity of the dyes to form compact pi-stacked dimers were shown to play an important role in establishing a non-uniform distribution of the adsorbed species throughout the porous space. The two effects appeared particularly strong in the case of the MB-water system. The necessity of including solvent effects in modeling studies is emphasized.

Analysis of the Behavior of Deep Eutectic Solvents upon Addition of Water: Its Effects over a Catalytic Reaction.

This study presents the potential role of deep eutectic solvents (DESs) in a lipase-catalyzed hydrolysis reaction as a co-solvent in an aqueous solution given by a phosphate buffer. Ammonium salts, such as choline chloride, were paired with hydrogen bond donors, such as urea, 1,2,3-propanetriol, and 1,2 propanediol. The hydrolysis of p-nitrophenyl laureate was carried out with the lipase Candida antarctica Lipase B (CALB) as a reaction model to evaluate the solvent effect and tested in different DES/buffer phosphate mixtures at different % w/w. The results showed that two mixtures of different DES at 25 % w/w were the most promising solvents, as this percentage enhanced the activities of CALB, as evidenced by its higher catalytic efficiency (kcatKM). The solvent analysis shows that the enzymatic reaction requires a reaction media rich in water molecules to enable hydrogen-bond formation from the reaction media toward the enzymatic reaction, suggesting a better interaction between the substrate and the enzyme-active site. This interaction could be attributed to high degrees of freedom influencing the enzyme conformation given by the reaction media, suggesting that CALB acquires a more restrictive structure in the presence of DES or the stabilized network given by the hydrogen bond from water molecules in the mixture improves the enzymatic activity, conferring conformational stability by solvent effects. This study offers a promising approach for applications and further perspectives on genuinely green industrial solvents.

Unraveling the Active Sites on Mesoporous CuFe2O4@N-Carbon Catalysts with Abundant Oxygen Vacancies and M-N-C Content for Boosted Nitrogen Reduction Toward Electrosynthesis of Ammonia.

Transition metal centers dispersed over nitrogen-doped carbon (M-NC) supports have been widely explored for electrocatalytic reactions; however, sparsely reported for electrochemical nitrogen reduction reaction (ENRR). Particularly, the single-atom catalysts (SACs) have shown reasonable ammonia yield rate and faradaic efficiency (FE), but their complex synthesis and low durability for long-term electrocatalysis runs restrict their use on a larger scale. Importantly, the catalytic active sites in metal nanostructured-based M-NC catalysts toward enhanced N2 adsorption and activation are still not clear as they are highly challenging to reveal. A few studies have predicted that the surface oxygen vacancies (Ovac) favor an enhanced ENRR performance. Herein, a strategy using tailored M-NC content and Ovac in a single catalyst for enhanced ammonia electrosynthesis is devised. A mesoporous bimetallic spinel oxide (CuFe2O4) supported over N-doped carbon (CuFe2O4@NC) derived from Prussian blue analog (PBA) via controlled pyrolysis possess is found to show boosted ENRR activity. Moreover, operando NH3 formation over the catalyst is observed using four electrode set up. This approach enables rapid evaluation ofelectrocatalytic efficacy and avoids false positive results. The rotating disc electrode results reveal that mass transport in acidic media and surface absorption in alkline media primarily regulate ENRR over CuFe2O4@NC electrocatalyst.

Theoretical insights into enantioselective [2 + 1] cyclopropanation reactions of diazo compounds with electron-deficient olefins.

CONTEXT: The cyclopropane skeleton plays a significant role in bioactive  molecules due to its distinctive structural properties. This has sparked keen interest and in-depth exploration in the field of stereoselective synthesis of cyclopropane derivatives. In the present study, the mechanism and the origin of stereoselectivity of diastereodivergent synthesis of cyclopropane derivatives via the catalyst-free [2 + 1]-cyclopropanation reactions of 3-diazo-N-methylindole (R1) with two types of electron-deficient olefins (R2 and R3) in both aqueous and toluene media have been studied using the DFT calculations. The findings indicate that these [2 + 1] cycloaddition reactions proceed in two stages, where the first step is not only the rate-determining step but also critically dictates the stereoselectivity of the product. The calculated diastereomeric ratios are in agreement with the experimental results. Furthermore, by utilizing non-covalent interaction (NCI) analysis and energy decomposition analysis based on molecular force fields (EDA-FF), we elucidated that the electrostatic interactions between reactant fragments in the transition state TS1s for the first step are the predominant factors determining the stereoselectivity, as opposed to the experimentally hypothesized steric hindrance and π-π stacking interactions. METHODS: The geometrical structures of all minima and transition states on the potential energy surface (PES) in solvents water and toluene were fully optimized using the DFT method at the M06-2X(D3)/SMD/6-31 + G(d,p) level of theory. Single-point energy calculations were carried out based on the optimized geometries in the solution at the M06-2X(D3)/6-311 + G(d,p) level. All the DFT calculations were performed using the Gaussian 09 software. The optimized molecular structures were visualized using CYLview software. NCI analysis was performed using the Multiwfn and VMD softwares. The Multiwfn program was also used for CDFT and EDA-FF analyses.

A theoretical study of the electron paramagnetic resonance spectra and local environment in copper(II) complexes with different imidazole and chlorido ligands.

Copper(II) chloride anionic coordination complexes with different imidazole-derived ligands due to the potential cytotoxic activity play the important role in protein. By investigating the experimental electron paramagnetic resonance (EPR) and ultraviolet-visible (UV-vis) spectra of [CuCl(C6H10N2)4]Cl, [CuCl(C6H10N2)4]Cl, [CuCl2(C4H6N2)4], and [Cu2Cl2(C5H8N2)6]Cl2·2H2O, the local structure of the corresponding Cu2+ centers and the role of different ligands are obtained. Based on the well-agreed EPR parameters and the d-d transitions (10Dq), the four Cu2+ centers show tetragonal and orthorhombic distortion, corresponding to the different anisotropies of EPR signals. In addition, the general rules of governing the impact of methanol in imidazolylalkyl derivatives are also discussed, especially the influence on the local environment (symmetry, distortion, covalency, and crystal field) of above four copper(II) chloride anionic coordination complexes. Therefore, the obtained results in this study will be beneficial to provide a theoretical basis for the experimental design of desired copper-containing imidazolyl alkyl derivatives.

The molecular structure, vibrational spectra, solvation effect, non-covalent interactions investigations of psilocin.

Psilocin, or 4-HO-DMT (or 3-(2-dimethylaminoethyl)-1H-indol-4-ol), is a psychoactive alkaloid substance from the tryptamine family, isolated from Psilocybe mushrooms. This substance is being studied by various research groups because it has a clear therapeutic effect in certain dosages. In this work, the study of the structure and properties of psilocin was carried using theoretical methods: the effects of polar solvents (acetonitrile, dimethylsulfoxide, water, and tetrahydrofuran) on the structural parameters, spectroscopic properties (Raman, IR, and UV-Vis), frontier molecular orbital (FMO), molecular electrostatic potential (MEP) surface, and nonlinear optical parameters (NLO). Theoretical calculations were performed at the B3LYP/6-311++G(d,p) level by the density functional theory (DFT) method. IEFPCM was used to account for solvent effects. The types and nature of non-covalent interactions (NCI) between psilocin and solvent molecules were determined using Atoms in Molecules (AIM), the reduced density gradient method (RDG), the electron localization function (ELF), and the localization orbital locator (LOL). Experimental and calculated FT-IR, FT-Raman, and UV-Vis spectra were compared and found to be in good agreement.

Alkyl-Doping Enables Significant Suppression of Conformational Relaxation and Intermolecular Nonradiative Decay for Improved Near-Infrared Fluorescence Imaging.

Despite various efforts to optimize the near-infrared (NIR) performance of perylene diimide (PDI) derivatives for bio-imaging, convenient and efficient strategies to amplify the fluorescence of PDI derivatives in biological environment and the intrinsic mechanism studies are still lacking. Herein, we propose an alkyl-doping strategy to amplify the fluorescence of PDI derivative-based nanoparticles for improved NIR fluorescence imaging. The developed PDI derivative, OPE-PDI, shows much brighter in n-Hexane (HE) compared with that in other organic media, and the excited state dynamics investigation experimentally elucidates the solvent effect-induced suppression of intermolecular energy transfer and intramolecular nonradiative decay as the underlying mechanism for the fluorescence improvement. Theoretical calculations reveal the lowest reorganization energies of OPE-PDI in HE among various solvents, indicating the effectively suppressed conformational relaxation to support the strongest radiative decay. Inspired by this, an alkyl atmosphere mimicking HE is constructed by incorporating the octadecane into OPE-PDI-based nanoparticles, permitting up to 3-fold fluorescence improvement compared with the counterpart nanoparticles. Owing to the merits of high brightness, anti-photobleaching, and low biotoxicity for the optimal nanoparticles, they have been employed for probing and long-term monitoring of tumor. This work highlights a facile strategy for the fluorescence enhancement of PDI derivative-based nanoparticles.

Solvent stabilizing effects on the order-disorder transition of schizophyllan in aqueous mixtures of carboxylic acids.

Schizophyllan is a triple helical ß-1,3-D-glucan, and shows the cooperative order-disorder transition in the aqueous solution at the triple helix state. In this paper, the solvent stabilizing effects of two carboxylic acids, acetic acid and citric acid, on the cooperative order-disorder transition of aqueous schizophyllan solution were investigated from DSC and SEC-MALS measurements. The transition temperature (Tr) was shifted to higher temperature with increasing the molar fraction of carboxylic acid in the mixture (x). The transition enthalpy (ΔHr) was increased with increasing x. These solvent stabilizing effects indicate that these carboxylic acid molecules were selectively associated with the branched side chains of schizophyllan to stabilize the ordered state. The composition dependencies of Tr and ΔHr were analyzed by the linear cooperative transition theory to estimate the association parameters between the side chains and carboxylic acid. The theoretical parameters obtained were compared with those for the other active substances for the transition to discuss the molecular interactions between the triple helix and carboxylic acid.

Influence of Ti-incorporated Zeolite Topology and Pore Condensation on Vapor Phase Propylene Epoxidation Kinetics with Gaseous H2O2.

Vapor-phase propylene (C3H6) epoxidation kinetics with hydrogen peroxide (H2O2) strongly reflects the physical properties of Ti-incorporated zeolite catalysts and the presence of spectating molecules ("solvent") near active sites even without a bulk liquid phase. Steady-state turnover rates of C3H6 epoxidation and product selectivities vary by orders of magnitudes, depending on the zeolite silanol ((SiOH)x) density, pore topology (MFI, *BEA, FAU), and the quantity of condensed acetonitrile (CH3CN) molecules nearby active sites, under identical reaction mechanisms sharing activated H2O2 intermediates on Ti surfaces. Individual kinetic analyses for propylene oxide (PO) ring-opening, homogeneous diol oxidative cleavage, and homogeneous aldehyde oxidation reveal that secondary reaction kinetics following C3H6 epoxidation responds more sensitively to the changes in zeolite physical properties and pore condensation with CH3CN. Thus, higher PO selectivities achieved in hydrophilic Ti-MFI at steady-state reflect the preferential stabilization of transition states for C3H6 epoxidation (a primary reaction) relative to PO ring-opening and oxidative cleavage (secondary reactions) that solvation effects that reflect interactions among condensed CH3CN within pores and the extended pore structure.