Manipulating the Electronic Properties of an Fe Single Atom Catalyst via Secondary Coordination Sphere Engineering to Provide Enhanced Oxygen Electrocatalytic Activity in Zinc-Air Batteries.

Oxygen reduction and evolution reactions are two key processes in electrochemical energy conversion technologies. Synthesis of nonprecious metal, carbon-based electrocatalysts with high oxygen bifunctional activity and stability is a crucial, yet challenging step to achieving electrochemical energy conversion. Here, an approach to address this issue: synthesis of an atomically dispersed Fe electrocatalyst (Fe1/NCP) over a porous, defect-containing nitrogen-doped carbon support, is described. Through incorporation of a phosphorus atom into the second coordination sphere of iron, the activity and durability boundaries of this catalyst are pushed to an unprecedented level in alkaline environments, such as those found in a zinc-air battery. The rationale is to delicately incorporate P heteroatoms and defects close to the central metal sites (FeN4P1-OH) in order to break the local symmetry of the electronic distribution. This enables suitable binding strength with oxygenated intermediates. In situ characterizations and theoretical studies demonstrate that these synergetic interactions are responsible for high bifunctional activity and stability. These intrinsic advantages of Fe1/NCP enable a potential gap of a mere 0.65 V and a high power density of 263.8 mW cm-2 when incorporated into a zinc-air battery. These findings underscore the importance of design principles to access high-performance electrocatalysts for green energy technologies.

Customization of 2D Atomic-Molecular Heterojunction with Manipulatable Charge-Transfer and Band Structure.

Manipulating the properties of 2D materials through meticulously engineered artificial heterojunctions holds great promise for novel device applications. However, existing research on the crucial charge-transfer interactions and energy profile regulation is predominantly focused on 2D van der Waals structures formed via weak van der Waals forces, limiting regulatory efficiency at high costs. Herein, a refined atomic-molecular heterojunction strategy featuring strong covalent bonds between organic molecule and 2D violet phosphorus (VP) atomic crystal is developed, which enables enhanced charge-transfer dynamics and customizable band structure regulation at the molecular level. Both experimentally and theoretically, it is demonstrated that grafting efficiency, charge redistribution, and energy gap regulation critically depend on organic electronegativity, providing a low-cost yet high-efficiency regulatory effect on a large scale. As a proof of concept, the novel VP-molecular heterojunctions exhibit optimized performance in diverse application domains, presenting a general platform for future high-performance device applications.

Chitin/Chitosan Nanofibers Toward a Sustainable Future: From Hierarchical Structural Regulation to Functionalization Applications.

Owing to its multiple fascinating properties of renewability, biodegradability, biocompatibility, and antibacterial activity, chitin is expected to become a green cornerstone of next-generation functional materials. Chitin nanofibers, as building blocks, form multiscale hierarchical structures spanning nano- and macrolevels in living organisms, which pave the way for sophisticated functions. Therefore, from a biomimetic perspective, exploiting chitin nanofibers for use in multifunctional, high-performance materials is a promising approach. Here, we first summarize the latest advances in the multiscale hierarchical structure assembly mode of chitin and its derivative nanofibers, including top-down exfoliation and bottom-up synthesis. Subsequently, we emphasize the environmental impacts of these methods, which are crucial for whether chitin nanofibers can truly contribute to a more eco-friendly era. Furthermore, the latest progress of chitin nanofibers in environmental and medical applications is also discussed. Finally, the potential challenges and tailored solutions of chitin nanofibers are further proposed, covering raw material, structure, function, manufacturing, policies, etc.

Recent Advances in Regulating Ceramic Monolithic Catalyst Structure for Preferential Oxidation of CO in H2.

Preferential oxidation of CO (CO-PROX) has tremendous significance in purifying hydrogen for fuel cells to avoid catalyst poisoning by CO molecules. Traditional powder catalysts face numerous challenges, including high pressure drop, aggregation tendency, hotspot formation, poor mass and heat transfer efficiency, and inadequate thermal stability. Accordingly, ceramic monolithic catalysts, known as their excellent thermal stability, high surface area, and superior mass and heat transfer characteristics, are gaining increasing research attention. This review examines recent studies on ceramic monolithic catalysts in CO-PROX, placing emphasis on the regulation of active sites (e.g., precious metals like Pt and Au, and non-precious metals like CuO and CeO2), monolith structures, and coating strategies. In addition, the structure-catalytic performance relationships, as well as the potential and limitations of different ceramic monolithic catalysts in practical application, are discussed. Finally, the challenges of monolithic catalysts and future research prospects in CO-PROX reactions are highlighted.

Constructing Metal-Organic Framework Films with Adjustable Electronic Properties on Hematite Photoanode for Boosting Photogenerated Carrier Transport.

Hematite (α-Fe2O3) has become a research hotspot in the field of photoelectrochemical water splitting (PEC-WS), but the low photogenerated carrier separation efficiency limits further application. The electronic structure regulation, such as element doping and organic functional groups with different electrical properties, is applied to alleviate the problems of poor electrical conductivity, interface defects, and band mismatch. Herein, α-Fe2O3 photoanodes are modified to regulate their electric structures and improve photogenerated carrier transport by the bimetallic metal-organic frameworks (MOFs), which are constructed with Fe/Ni and terephthalate (BDC) with 2-substitution of different organic functional groups (─H, ─Br, ─NO2 and ─NH2). The α-Fe2O3 photoanode loaded with FeNi-NH2BDC MOF catalyst exhibits the optimal photocurrent density (2 mA cm-2) at 1.23 VRHE, which is 2.33 times that of the pure α-Fe2O3 photoanode. The detailed PEC analyses demonstrate that the bimetallic synergistic effect between Fe and Ni can improve the conductivity and inhibit the photogenerated carrier recombination of α-Fe2O3 photoanodes. The ─NH2 group as an electron-donor group can effectively regulate the electron distribution and band structure of α-Fe2O3 photoanodes to prolong the lifetime of photogenerated holes, which facilitates photogenerated carrier transport and further enhances the PEC-WS performance of α-Fe2O3 photoanode.

Nanozyme Catalytic Performance Enhancement through Defect and Electronic Structure Regulation of Metal-Doped NiCo2O4@Pd.

Spinel oxides have emerged as a promising candidate in the realm of nanozymes with variable oxidation states, while their limited active sites and low conductivity hinder further application. In this work, we synthesize a series of metal-doped NiCo2O4 nanospheres decorated with Pd, which are deployed as highly efficient nanozymes for the detection of cancer biomarkers. Through meticulous modulation of the molar ratio between NiCo2O4 and Pd, we orchestrated precise control over the oxygen vacancies and electronic structure within the nanozymes, a key factor in amplifying the catalytic prowess. Leveraging the superior H2O2 reduction catalytic properties of Fe-NiCo2O4@Pd, we have successfully implemented its application in the electrochemical detection of biomarkers, achieving unparalleled analytical performance, much higher than that of Pd/C and other reported nanozymes. This research paves the way for innovative electron modification strategies in the design of high-performance nanozymes, presenting a formidable tool for clinical diagnostic analyses.

Fluorine Incorporation for Enhanced Gas Separation Performance in Porous Organic Polymers: Investigating Reaction Pathways and Pore Structure Control.

The precise control of pore structures in porous organic polymer (POP) materials is of paramount importance in addressing a wide range of challenges associated with gas separation processes. In this study, we present a novel approach to optimize the gas separation performance of POPs through the introduction of fluorine groups and figure out an important factor of reaction decision that whether the AlCl3-catalyzed polymerization is Scholl reaction or Friedel-Crafts alkylation. In the chloroform system, the steric hindrance of function groups could make direct coupling between the benzene rings difficult, which would lead to part solvent knitting (Friedel-Crafts alkylation) instead. The fluorinated polymers show enhanced surface area and pore size characteristics. Notably, the fluorinated polymers exhibited significantly improved adsorption and separation performance for SF6, as evidenced by an ideal adsorbed solution theory selectivity (SF6/N2, v: v = 50:50, 273 K) increase of 75.0, 668.8, and 502.8% compared to the nonfluorinated POPs. These findings highlight the potential of fluorination as a strategy for tailoring the properties of POP materials for advanced gas separation applications.

Design of Atomically Dispersed CoN4 Sites and Co Clusters for Synergistically Enhanced Oxygen Reduction Electrocatalysis.

Constructing dual-site catalysts consisting of atomically dispersed metal single atoms and metal atomic clusters (MACs) is a promising approach to further boost the catalytic activity for oxygen reduction reaction (ORR). Herein, a porous CoSA-AC@SNC featuring the coexistence of Co single-atom sites (CoN4) and S-coordinated Co atomic clusters (SCo6) in S, N co-doped carbon substrate is successfully synthesized by using porphyrinic metal-organic framework (Co-TPyP MOF) as the precursor. The introduction of the sulfur source creates abundant microstructural defects to anchor Co metal clusters, thus modulating the electronic structure of its surrounding carbon substrate. The synergistic effect between the two types of active sites and structural advantages, in turn, results in high ORR performance of CoSA-AC@SNC with half-wave potential (E1/2) of 0.86 V and Tafel slope of 50.17 mV dec-1. Density functional theory (DFT) calculations also support the synergistic effect between CoN4 and SCo6 by detailing the catalytic mechanism for the improved ORR performance. The as-fabricated Zn-air battery (ZAB) using CoSA-AC@SNC demonstrates impressive peak power density of 174.1 mW cm-2 and charge/discharge durability for 148 h. This work provides a facile synthesis route for dual-site catalysts and can be extended to the development of other efficient atomically dispersed metal-based electrocatalysts.

CuNi alloy anchored on dual-substrate TiOx/N-doped carbon nanofibers as a bifunctional electrocatalyst for rechargeable zinc-air batteries.

Development of non-noble metal-based electrocatalysts to enhance the performance of zinc-air batteries (ZABs) is of great significance, but it remains a formidable challenge due to their poor stability and activity. Herein, a bifunctional CuNi-TiOx/NCNFS electrocatalyst, featuring with electron-rich copper-nickel (CuNi) alloy nanoparticles anchored on titanium oxide/N-doped carbon nanofibers (TiOx/NCNFS), is constructed by a dual-substrate loading strategy. The introduction of TiOx has led to a significant increase in the stability of the dual-substrate. The strong electronic interaction between CuNi and TiOx strengthens the anchoring of active metal sites, thus accelerating the electron transfer. Theoretical calculations unclose that NCNFS can regulate the charge distribution of TiOx, inducing the charge transfer from NCNFS â†’ TiOx â†’ CuNi, thereby reducing the d-band center of Cu and Ni, which is beneficial to the desorption of intermediate oxide species of the oxygen evolution reaction (OER) and oxygen reduction reaction (ORR). Therefore, CuNi-TiOx/NCNFS delivers a remarkable bifunctional performance with a low OER overpotential of 258 mV at 10 mA cm-2 and an ORR half-wave potential of 0.85  V. When assembled into ZABs, CuNi-TiOx/NCNFS shows a low potential gap of 0.64 V, a higher power density of 149.6 mW cm-2 at 330 mA cm-2, and an outstanding stability for 250 h at 5mA cm-2. This study provides a novel approach by constructing dual-substrate to tune the electronic structure of active metal sites for efficient rechargeable ZABs.

Tuning Octahedron Sites of CoV2O4 via Cationic Competition for Efficient Oxygen Evolution Reaction.

Doping transition metal oxide spinels with metal ions represents a significant strategy for optimizing the electronic structure of electrocatalysts. Herein, a bimetallic Fe and Ru doping strategy to fine-tune the crystal structure of CoV2O4 spinel for highly enhanced oxygen evolution reaction (OER) is presented performance. The incorporation of Fe and Ru is observed at octahedral sites within the CoV2O4 structure, effectively modulating the electronic configuration of Co. Density functional theory calculations have confirmed that Fe acts as a novel reactive site, replacing V. Additionally, the synergistic effect of Fe, Co, and Ru effectively optimizes the Gibbs free energy of the intermediate species, reduces the reaction energy barrier, and accelerates the kinetics toward OER. As expected, the best-performing CoVFe0.5Ru0.5O4 displays a low overpotential of 240 mV (@10 mA cm-2) and a remarkably low Tafel slope of 38.9 mV dec-1, surpassing that of commercial RuO2. Moreover, it demonstrates outstanding long-term durability lasting for 72 h. This study provides valuable insights for the design of highly active polymetallic spinel electrocatalysts for energy conversion applications.

Anion Structure Regulation of Cobalt Silicate Hydroxide Endowing Boosted Oxygen Evolution Reaction.

Transition metal silicates (TMSs) are attempted for the electrocatalyst of oxygen evolution reaction (OER) due to their special layered structure in recent years. However, defects such as low theoretical activity and conductivity limit their application. Researchers always prefer to composite TMSs with other functional materials to make up for their deficiency, but rarely focus on the effect of intrinsic structure adjustment on their catalytic activity, especially anion structure regulation. Herein, applying the method of interference hydrolysis and vacancy reserve, new silicate vacancies (anionic regulation) are introduced in cobalt silicate hydroxide (CoSi), named SV-CoSi, to enlarge the number and enhance the activity of catalytic sites. The overpotential of SV-CoSi declines to 301 mV at 10 mA cm-2 compared to 438 mV of CoSi. Source of such improvement is verified to be not only the increase of active sites, but also the positive effect on the intrinsic activity due to the enhancement of cobalt-oxygen covalence with the variation of anion structure by density functional theory (DFT) method. This work demonstrates that the feasible intrinsic anion structure regulation can improve OER performance of TMSs and provides an effective idea for the development of non-noble metal catalyst for OER.

Customization of Manganese Oxide Cathodes via Precise Electrochemical Lithium-Ion Intercalation for Diverse Zinc-Ion Batteries.

Manganese oxide-based aqueous zinc-ion batteries (ZIBs) are attractive energy storage devices, owing to their good safety, low cost, and ecofriendly features. However, various critical issues, including poor conductivity, sluggish reaction kinetics, and unstable structure still restrict their further development. Oxygen defect engineering is an effective strategy to improve the electrochemical performance of manganese oxides, but challenging in the accurate regulation of oxygen defects. In this work, an effective and controllable defect engineering strategy-controllable electrochemical lithium-ion intercalation - is proposed to tackle this issue. The incorporation of lithium ions and oxygen defects can promote the conductivity, lattice spacing, and structural stability of Mn2O3 (MO), thus improving its capacity (232.7 mAh g-1), rate performance, and long-term cycling stability (99.0% capacity retention after 3000 cycles). Interestingly, the optimal ratio of intercalated lithium-ion varies at different temperature or mass-loading of MO, which provides the possibility to customize diverse ZIBs to meet different application conditions. In addition, the fabricated ZIBs present good flexibility, superior safety, and admirable adaptability under extreme temperatures (-20-100 °C). This work provides an inspiration on the structural customization of metal oxide nanomaterials for diverse ZIBs, and sheds light on the construction of future portable electronics.

Insights into the assembly process and properties of regenerated cellulose beads prepared in alkali/urea aqueous solutions.

Taking the perspective of cellulose molecular chain assembly via the "bottom-top" route, we delve into the influence of both the cellulose solution and the coagulation bath on the assembly process and structure of regenerated cellulose beads (RCBs). The results show that cellulose molecular weight, mass fraction, and the presence of surfactant have an impact on RCBs. Contrary to traditional views where the structures of material are determined by solvent-nonsolvent exchange rate, ion-cellulose binding capacity also affects RCBs. Overall, the influence of ions follows the Hofmeister sequence. Kosmotropes promote the assembly of cellulose chains and elementary fibers, leading to "salting out" effects, reduced pore size of RCBs, increased crystallinity, and enhanced mechanical properties. In contrast, chaotropes induce "salting in" effects, resulting in opposite outcomes. The average pore size of RCBs coagulated in NaSCN solution was approximately 15-folds larger than those prepared in sodium citrate solution. Anions have a greater impact than cations, and both "salting out" and "salting in" effects strengthen with concentration. Temperature variations primarily affect solvent and nonsolvent exchange speed during cellulose regeneration. These findings provide new insights into regulating RCBs, enabling tailored performance for different applications.

Biochar with enhanced performance prepared based on "graphite-structure regulation" conjecture designed to effectively control water pollution.

In this work, corn straw was used as raw material, Hummers method and activation were used to adjust the graphite structure in biochar, and preparing straw based biochar (H-BCS) with ultra-high specific surface area (3441.80 m2/g), highly total pore volume (1.9859 cm3/g), and further enhanced physicochemical properties. Compared with untreated straw biochar (BCS), the specific surface area and total pore volume of H-BCS were increased by 47.24 % and 55.85 %, respectively. H-BCS showed good removal ability in subsequent experiments by using chloramphenicol (CP), hexavalent chromium (Cr6+), and crystal violet (CV) as adsorption models. In addition, the adsorption capacities of H-BCS (CP: 1396.30 mg/g, Cr6+: 218.40 mg/g, and CV: 1246.24 mg/g) are not only higher than most adsorbents, even after undergoing 5 cycles of regeneration, its adsorption capacity remains above 80 %, indicating significant potential for practical applications. In addition, we also speculated and analyzed the conjecture about the "graphite-structure regulation" during the preparation process, and finally discussed the possible mechanism during the adsorption processes. We hope this work could provide a new strategy to solve the restriction of biochar performance by further exploring the regulation of graphite structure in carbon materials.

MoS2/ReS2 Hollow Heterojunction for Enhanced Aqueous Zinc-Ion Storage Performance.

The research of cathode materials for water-based zinc ion batteries (ZIBs) is very hot because the current mainstream electrode makes it difficult to meet the requirements of high specific discharge capacity and maintain a stable structure in the electrochemical process. In this work, the cathode properties are adjusted by the modification idea of morphology regulation and heterojunction construction. The simple hydrothermal method is used to prepare the hollow bimetallic heterojunction nanospheres, and their electrochemical properties as cathode materials for ZIBs are studied for the first time. Herein, the optimized cathode delivers high-rate performance and long-term cycling stability (∼98.9% Coulombic efficiency at 0.1 A g-1 after 200 cycles). The results indicate that the hollow bimetallic heterojunction nanospheres can support the material structure and provide a wide Zn2+ migration channel. The excellent performance is because hollow heterojunction bimetallic sulfides can provide abundant catalytic active sites, improve the mobility of electrons, and enhance the battery performance fundamentally. Therefore, we firmly believe that the combination of the different modification ideas can coordinate to adjust the electrode performance of ZIBs, enriching the electrode types and expanding the energy system application range.

Ruthenium-Cobalt Solid-Solution Alloy Nanoparticles for Enhanced Photopromoted Thermocatalytic CO2 Hydrogenation to Methane.

Bimetallic alloy nanoparticles have garnered substantial attention for diverse catalytic applications owing to their abundant active sites and tunable electronic structures, whereas the synthesis of ultrafine alloy nanoparticles with atomic-level homogeneity for bulk-state immiscible couples remains a formidable challenge. Herein, we present the synthesis of RuxCo1-x solid-solution alloy nanoparticles (ca. 2 nm) across the entire composition range, for highly efficient, durable, and selective CO2 hydrogenation to CH4 under mild conditions. Notably, Ru0.88Co0.12/TiO2 and Ru0.74Co0.26/TiO2 catalysts, with 12 and 26 atom % of Ru being substituted by Co, exhibit enhanced catalytic activity compared with the monometallic Ru/TiO2 counterparts both in dark and under light irradiation. The comprehensive experimental investigations and density functional theory calculations unveil that the electronic state of Ru is subtly modulated owing to the intimate interaction between Ru and Co in the alloy nanoparticles, and this effect results in the decline in the CO2 conversion energy barrier, thus ultimately culminating in an elevated catalytic performance relative to monometallic Ru and Co catalysts. In the photopromoted thermocatalytic process, the photoinduced charge carriers and localized photothermal effect play a pivotal role in facilitating the chemical reaction process, which accounts for the further boosted CO2 methanation performance.

Correlation between Heteroatom Coordination and Hydrogen Evolution for Single-site Pt on Carbon-based Nanocages.

The electrocatalytic performance of single-site catalysts (SSCs) is closely correlated with the electronic structure of metal atoms. Herein we construct a series of Pt SSCs on heteroatom-doped hierarchical carbon nanocages, which exhibit increasing hydrogen evolution reaction (HER) activities along S-doped, P-doped, undoped and N-doped supports. Theoretical simulation indicates a multi-H-atom adsorption process on Pt SSCs due to the low coordination, and a reasonable descriptor is figured out to evaluate the HER activities. Relative to C-coordinated Pt, N-coordinated Pt has higher reactivity due to the electron transfer of N-to-Pt, which enriches the density of states of Pt 5d orbital near the Fermi level and facilitates the capturing of protons, just the opposite to the situations for P- and S-coordinated ones. The stable N-coordinated Pt originates from the kinetic stability throughout the multi-H-atom adsorption process. This finding provides a significant guidance for rational design of advanced Pt SSCs on carbon-based supports.

Super-Enhancers and Their Parts: From Prediction Efforts to Pathognomonic Status.

Super-enhancers (SEs) are regions of the genome that play a crucial regulatory role in gene expression by promoting large-scale transcriptional responses in various cell types and tissues. Recent research suggests that alterations in super-enhancer activity can contribute to the development and progression of various disorders. The aim of this research is to explore the multifaceted roles of super-enhancers in gene regulation and their significant implications for understanding and treating complex diseases. Here, we study and summarise the classification of super-enhancer constituents, their possible modes of interaction, and cross-regulation, including super-enhancer RNAs (seRNAs). We try to investigate the opportunity of SE dynamics prediction based on the hierarchy of enhancer single elements (enhancers) and their aggregated action. To further our understanding, we conducted an in silico experiment to compare and differentiate between super-enhancers and locus-control regions (LCRs), shedding light on the enigmatic relationship between LCRs and SEs within the human genome. Particular attention is paid to the classification of specific mechanisms and their diversity, exemplified by various oncological, cardiovascular, and immunological diseases, as well as an overview of several anti-SE therapies. Overall, the work presents a comprehensive analysis of super-enhancers across different diseases, aiming to provide insights into their regulatory roles and may act as a rationale for future clinical interventions targeting these regulatory elements.

Structural Design of Single-Atom Catalysts for Enhancing Petrochemical Catalytic Reaction Process.

Petroleum, as the "lifeblood" of industrial development, is the important energy source and raw material. The selective transformation of petroleum into high-end chemicals is of great significance, but still exists enormous challenges. Single-atom catalysts (SACs) with 100% atom utilization and homogeneous active sites, promise a broad application in petrochemical processes. Herein, the research systematically summarizes the recent research progress of SACs in petrochemical catalytic reaction, proposes the role of structural design of SACs in enhancing catalytic performance, elucidates the catalytic reaction mechanisms of SACs in the conversion of petrochemical processes, and reveals the high activity origins of SACs at the atomic scale. Finally, the key challenges are summarized and an outlook on the design, identification of active sites, and the appropriate application of artificial intelligence technology is provided for achieving scale-up application of SACs in petrochemical process.

Electronic Structure Regulated Nickel-Cobalt Bimetal Phosphide Nanoneedles for Efficient Overall Water Splitting.

Transition metal phosphides (TMPs) have been widely studied for water decomposition for their monocatalytic property for anodic or cathodic reactions. However, their bifunctional catalytic activity still remains a major challenge. Herein, hexagonal nickel-cobalt bimetallic phosphide nanoneedles with 1-3 µm length and 15-30 nm diameter supported on NF (NixCo2-xP NDs/NF) with adjusted electron structure have been successfully prepared. The overall alkaline water electrolyzer composed of the optimal anode (Ni0.67Co1.33P NDs/NF) and cathode (Ni1.01Co0.99P NDs/NF) provide 100 mA cm-2 at 1.62 V. Gibbs Free Energy for reaction paths proves that the active site in the hydrogen evolution reaction (HER) is Ni and the oxygen evolution reaction (OER) is Co in NixCo2-xP, respectively. In the HER process, Co-doping can result in an apparent accumulation of charge around Ni active sites in favor of promoting HER activity of Ni sites, and ΔGH* of 0.19 eV is achieved. In the OER process, the abundant electron transfer around Co-active sites results in the excellent ability to adsorb and desorb *O and *OOH intermediates and an effectively reduced ∆GRDS of 0.37 eV. This research explains the regulation of electronic structure change on the active sites of bimetallic materials and provides an effective way to design a stable and effective electrocatalytic decomposition of alkaline water.