Modeling Time-Dependent Aquatic Toxicity of Hydrocarbons: Role of Organism Weight, Temperature, and Substance Hydrophobicity.

Oil spill exposures are highly dynamic and are not comparable to laboratory exposures used in standard toxicity tests. Toxicokinetic-toxicodynamic (TKTD) models allow translation of effects observed in the laboratory to the field. To improve TKTD model calibration, new and previously published data from 148 tests were analyzed to estimate rates characterizing the time course of toxicity for 10 fish and 42 invertebrate species across 37 hydrocarbons. A key parameter in the TKTD model is the first-order rate that incorporates passive elimination, biotransformation, and damage repair processes. The results indicated that temperature (4-26 °C), organism size (0.0001-10 g), and substance log octanol-water partition coefficient (2-6) had limited influence on this parameter, which exhibited a 5th to 95th percentile range of 0.2-2.5 day-1 (median 0.7 day-1 ). A species sensitivity distribution approach is proposed to quantify the variability of this parameter across taxa, with further studies needed for aliphatic hydrocarbons and plant species. Study findings allow existing oil spill models to be refined to improve effect predictions. Environ Toxicol Chem 2022;41:3070-3083. © 2022 ExxonMobil Biomedical Science Inc. Environmental Toxicology and Chemistry published by Wiley Periodicals LLC on behalf of SETAC.

The effects of different temperatures in mercury toxicity to the terrestrial isopod Porcellionides pruinosus.

Climate changes and metal contamination are pervasive stressors for soil ecosystems. Mercury (Hg), one of the most toxic metals, has been reported to interact with temperature. However, compared to aquatic biota, little is known about how temperature affects Hg toxicity and bioaccumulation to soil organisms. Here, toxicity and bioaccumulation experiments were replicated at 15 °C, 20 °C, and 25 °C to understand how sub-optimal temperatures affect the toxicokinetics and toxicodynamics of Hg via soil. Genotoxicity and energy reserves were also assessed to disclose potential trade-offs in life-history traits. Results underpin the complexity of temperature-Hg interactions. Survival was determined mainly by toxicokinetics, but toxicodynamics also played a significant role in defining survival probability during early stages. The processes determining survival probability were faster at 25 °C: General Unified Threshold of Survival (GUTS) model identified an earlier/steeper decline in survival, compared to 20 °C or 15 °C, but it also approached the threshold faster. Despite potentiation of Hg genotoxicity, temperature promoted faster detoxification, either increasing toxicokinetics rates or damage repair mechanisms. This metabolism-driven increase in detoxification led to higher depletion of energy reserves and likely triggered stress response pathways. This work emphasized the need for comprehensive experimental approaches that can integrate the multiple processes involved in temperature-metal interactions.

A review of interactions of microplastics and typical pollutants from toxicokinetics and toxicodynamics perspective.

The widespread microplastics (MPs) pollution has become a concerning environmental issue. The interactions between MPs and typical pollutants may change the bioaccumulation, and toxicity of pollutants, leading to high uncertainty in risk assessment. Still, significant gaps remain in the knowledge available to integrate these interactions in the perspectives of toxicokinetics (TK) and toxicodynamics (TD), which is also an essential part of quantitative toxicological research. This review systematically summarizes the interaction between MPs and typical pollutants in TK and TD processes. MPs can be acted as the vector or sink of pollutants to increase or decrease their bioaccumulation, and also may not affect their bioaccumulation due to no interaction. The adverse outcome pathway (AOP) framework enables novel approaches for determining the interaction between MPs and pollutants in the TD process. MPs can directly or indirectly enhance, reduce and not affect the toxicity of pollutants. A series of factors influencing the interaction in TK and TD processes are summarized, including MPs characteristics and exposure scenarios. TK-TD approach can quantitatively understand the interaction between MPs and pollutants based on the mechanism. Given the current knowledge gap in TK and TD processes, future perspectives on combined exposure research are proposed.

Terrestrial organisms react differently to nano and non-nano Cu(OH)2 forms.

The application of nanomaterials in agriculture is deemed as a promising strategy to increase the sector's sustainability. Nanopesticides are expected to improve solutions for pest/disease management, while reducing adverse effects to ecosystems, in accordance with the European Green Deal strategy. Hitherto, nanopesticide research has mostly focused on assessing effects to target species or crops, and less attention has been devoted to non-target soil species. In this study, we explored whether three copper hydroxide-based forms (nano and non-nano) show different toxicity and accumulation patterns in two terrestrial invertebrates, the isopod Porcellionides pruinosus and the mealworm larvae Tenebrio molitor. Toxicity and bioaccumulation experiments were performed and time-course toxicity and toxicokinetics analyzed and modelled. We found important differences in copper sensitivity and accumulation: T. molitor was more resistant and able to eliminate copper compared to P. pruinosus. The nanopesticide mostly elicited lower effects for both species. Slower toxicokinetics by the nanopesticide and lower bioaccumulative potential to P. pruinosus must be partially responsible for the differences in toxicity. Although no toxicokinetics differences were found in T. molitor between Cu forms, distinct negative effects on growth must reflect different energetic costs for copper regulation. Even though effects on toxicity and bioaccumulation are species-specific, copper hydroxide-based nanopesticides may cause less adverse effects to soil organisms than conventional products, being a good solution for reducing the environmental impact. CAPSULE: Copper hydroxide-based nanopesticide was less toxic and bioaccumulative to soil organisms than conventional copper hydroxide products, being a good solution for reducing the environmental impact.

Sublethal effect modelling for environmental risk assessment of chemicals: Problem definition, model variants, application and challenges.

Bioenergetic models, and specifically dynamic energy budget (DEB) theory, are gathering a great deal of interest as a tool to predict the effects of realistically variable exposure to toxicants over time on an individual animal. Here we use aquatic ecological risk assessment (ERA) as the context for a review of the different model variants within DEB and the closely related DEBkiss theory (incl. reserves, ageing, size & maturity, starvation). We propose a coherent and unifying naming scheme for all current major DEB variants, explore the implications of each model's underlying assumptions in terms of its capability and complexity and analyse differences between the models (endpoints, mathematical differences, physiological modes of action). The results imply a hierarchy of model complexity which could be used to guide the implementation of simplified model variants. We provide a decision tree to support matching the simplest suitable model to a given research or regulatory question. We detail which new insights can be gained by using DEB in toxicokinetic-toxicodynamic modelling, both generally and for the specific example of ERA, and highlight open questions. Specifically, we outline a moving time window approach to assess time-variable exposure concentrations and discuss how to account for cross-generational exposure. Where possible, we suggest valuable topics for experimental and theoretical research.

Light and temperature influence on diuron bioaccumulation and toxicity in biofilms.

Variations of temperature and photoperiod throughout different seasons can affect aquatic communities such as biofilms. Biofilms, generally present at the base of trophic chains in freshwaters, are also subject to organic contamination, and are especially affected by herbicides. Many studies have investigated the effect and interactions of herbicides and environmental factors on biofilms, but never with a toxicokinetic point of view. The objective of this study was to assess structural and functional changes in biofilms exposed to diuron, and to link them with contaminant accumulation, under the influence of temperature and light variations. To this aim, biofilms were exposed to all possible combinations of three concentrations (0, 5 and 50 µg L-1) of diuron, two temperatures (10 and 26 °C), and two light/dark photoperiods (16/8, 10/14), for durations of 0, 1 and 3 days. Diuron accumulation in biofilms was quantified and structural descriptors (protein and polysaccharide contents, dry weight) and functional endpoints (photosynthetic and enzymatic activities) were analyzed. The results obtained mainly highlighted the influence of temperature on diuron bioaccumulation and the associated toxic impact on biofilms. Bioaccumulation in biofilms exposed during three days at 10 °C, at the highest diuron concentration, was in average 1.4 times higher than bioaccumulation on biofilms exposed to 26 °C. Accordingly, the photosynthetic yield was more inhibited at lower than at higher temperatures. Temperature was also the highest impacting factor for metabolism regulation; for example, at 26 °C after three days of exposure, polysaccharide production was boosted under both photoperiods tested.

Fit Reduced GUTS Models Online: From Theory to Practice.

Mechanistic modeling approaches, such as the toxicokinetic-toxicodynamic (TKTD) framework, are promoted by international institutions such as the European Food Safety Authority and the Organization for Economic Cooperation and Development to assess the environmental risk of chemical products generated by human activities. TKTD models can encompass a large set of mechanisms describing the kinetics of compounds inside organisms (e.g., uptake and elimination) and their effect at the level of individuals (e.g., damage accrual, recovery, and death mechanism). Compared to classical dose-response models, TKTD approaches have many advantages, including accounting for temporal aspects of exposure and toxicity, considering data points all along the experiment and not only at the end, and making predictions for untested situations as realistic exposure scenarios. Among TKTD models, the general unified threshold model of survival (GUTS) is within the most recent and innovative framework but is still underused in practice, especially by risk assessors, because specialist programming and statistical skills are necessary to run it. Making GUTS models easier to use through a new module freely available from the web platform MOSAIC (standing for MOdeling and StAtistical tools for ecotoxIClogy) should promote GUTS operability in support of the daily work of environmental risk assessors. This paper presents the main features of MOSAIC_GUTS: uploading of the experimental data, GUTS fitting analysis, and LCx estimates with their uncertainty. These features will be exemplified from literature data. Integr Environ Assess Manag 2018;14:625-630. © 2018 SETAC.