Controlling lipid crystallization across multiple length scales by directed shear flow.

The crystallization behavior of lipids is relevant in many fields such as adipose tissue formation and regeneration, forensic investigations and food production. Using a lipid model system composed of triacylglycerols, we study the formation of crystalline structures under laminar shear flows across various length scales by polarized light-, scanning electron-, and atomic force microscopy, as well as laser diffraction spectroscopy. The shear rate during crystallization γ̇cryst influences the acyl-chain length structure and promotes domain growth into the flow direction thereby transforming the crystallites from oblate into prolate particles. Concentration dependent aggregation of crystallites into clusters is the rate limiting step for floc and floc network formation. At high γ̇cryst, fast crystallite cluster formation at smaller equilibrium diameters is promoted. The high crystallite cluster concentration induces their aggregation into flocs which form weak networks. At low γ̇cryst, floc generation is limited by the low amount of crystallite clusters leading to slow growth of larger flocs and forming of strong networks. The findings in this work have potential implications ranging from the design of injectable soft tissue fillers for adipose tissue regeneration, to the crystalline network formation in microorganism derived lipids, up to a more energy-efficient production of chocolate confectionery.

Investigation on formulation parameters of donepezil HCl loaded solid lipid nanoparticles

Abstract Donepezil-HCl is a member of the acetylcholinesterase inhibitors that is indicated for the symptomatic treatment of Alzheimer's disease (AD) and has many side effects. In this study, to reduce the side effects of Donepezil-HCl and increase the penetration of the drug through the blood-brain barrier, we aimed to design a solid lipid nanoparticle (SLN) formulation. The effects of the different formulation parameters, such as homogenization speed, sonication time, lipid and drug concentration, surfactant type and concentration, and volume of the aqueous phase, were assessed for optimization. The particle size and PDI increased with increasing lipid concentration but decreased with increasing amounts of surfactant (Tween 80) and co-surfactant (lecithin). When the homogenization rate and sonication time increased, the particle size decreased and the encapsulation efficiency increased. The optimized formulation exhibited particle size, PDI, encapsulation efficiency, and zeta potential of 87.2±0.11 nm; 0.22±0.02; 93.84±0.01 %; -17.0±0.12 mV respectively. The in vitro release investigation revealed that approximately 70% of Donepezil-HCl was cumulatively released after 24 hours. TEM analysis proved that spherical and smooth particles were obtained and formulations had no toxic effect on cells. The final optimized formulation could be a candidate for Donepezil-HCl application in Alzheimer's treatment with reduced side effects and doses for patients

Normal-Phase HPLC-ELSD to Compare Lipid Profiles of Different Wheat Flours.

Normal-phase high-performance liquid chromatography (HPLC) is widely used in combination with evaporative light scattering detection (ELSD) for separating and detecting lipids in various food samples. ELSD responses of different lipids were evaluated to elucidate the possibilities and challenges associated with quantification by means of HPLC-ELSD. Not only the number and type of polar functional groups but also the chain length and degree of unsaturation of (free or esterified) fatty acids (FAs) had a significant effect on ELSD responses. Tripalmitin and trilinolein yielded notably different ELSD responses, even if their constituting free FAs produced identical responses. How FA structure impacts ELSD responses of free FAs is thus not predictive for those of triacylglycerols and presumably other lipids containing esterified FAs. Because ELSD responses of lipids depend on the identity of the (esterified) FA(s) which they contain, fully accurate lipid quantification with HPLC-ELSD is challenging and time-consuming. Nonetheless, HPLC-ELSD is a good and fast technique to semi-quantitatively compare the levels of different lipid classes between samples of comparable FA composition. In this way, lipid profiles of different flours from near-isogenic wheat lines could be compared.

Systematic Investigation of Co-Crystallization Properties in Binary and Ternary Mixtures of Triacylglycerols Containing Palmitic and Oleic Acids in Relation with Palm Oil Dry Fractionation.

This work investigates the molecular interactions within the main triacylglycerols constitutive of palm oil, all having a key role in the multi-step dry fractionation process. Identification of these interactions is possible thanks to the establishment of binary and ternary phase diagrams, using differential scanning calorimetry (DSC) and powder X-ray diffraction (XRD) at variable temperature. The following systems were selected: PPP-POP, PPP-OPP, PPP-POO, POP-OPP, POP-POO, OPP-POO, PPP-POP-POO and PPP-OPP-POO (P: palmitic acid and O: oleic acid), and analyzed in direct mode (heating at 5 °C/min., after melting and quenching at -60 °C), and after tempering for three months at 20 °C (tempered mode). DSC makes it possible to bring out crystallization and melting phenomena associated to polymorphic transitions, which are further characterized (crystalline forms) by XRD. The results show that unsaturated are poorly soluble in fully saturated triacylglycerols, that the intersolubility decreases in proportion to the number of unsaturated fatty acids, that positional isomerism (POP/OPP) has a major impact, that OPP may induce formation of molecular compounds and that co-crystallization properties are highly modified by tempering depending on the polymorphic properties of the systems. This provides a better understanding and allows for effective control of the palm oil dry fractionation process.

Filgrastim loading in PLGA and SLN nanoparticulate system: a bioinformatics approach.

OBJECTIVE: In this research work, we hypothesized to predict the nanoparticulate system, best suited for targeted delivery of filgrastim. Significance: Targeted delivery of filgrastim to bone marrow is required to decrease the incidence of neutropenia/febrile neutropenia. This is achieved by nanoparticulate systems, duly designed by bioinformatics approach. METHOD: The targeted delivery of filgrastim in nanoparticulate system was achieved by molecular dynamics (MD) simulation studies. Two matrices comprising PLGA and SLN (tripalmitin, core component of SLN system) were modeled separately with proposed drug filgrastim. Energy minimization of all systems was done using the steepest descent method. PLGA and tripalmitin systems were equalized at 310 °C, at 1 bar pressure with Berendsen barostat for 200 ps using a v-rescale thermostat for 100 ps. Atomistic MD simulations of four model system and mass density of interacting systems were calculated. RESULTS: The mass density maps of each nanoparticle system, that is, PLGA and tripalmitin showed an increase in density toward the end of the simulation. The contact numbers attained equilibria with the average number of approx.. 1500 contacts in case of tripalmitin-filgrastim system. While PLGA-filgrastim system shows lesser contacts as compared to tripalmitin with average contacts of approx. 1000.The binding free energy was predicted to be -1104 kJ/mol in tripalmitin-filgrastim complex and -421 kJ/mol in PLGA-filgrastim system. CONCLUSION: Findings of study revealed that both nanoparticle systems assumed to be good model for drug-carrier systems. Though SLN systems were thought to be more appropriate than PLGA, still the in vivo findings could ascertain this hypothesis in futuristic work.

Hot Melt Coating of Amorphous Carvedilol.

The use of amorphous drug delivery systems is an attractive approach to improve the bioavailability of low molecular weight drug candidates that suffer from poor aqueous solubility. However, the pharmaceutical performance of many neat amorphous drugs is compromised by their tendency for recrystallization during storage and lumping upon dissolution, which may be improved by the application of coatings on amorphous surfaces. In this study, hot melt coating (HMC) as a solvent-free coating method was utilized to coat amorphous carvedilol (CRV) particles with tripalmitin containing 10% (w/w) and 20% (w/w) of polysorbate 65 (PS65) in a fluid bed coater. Lipid coated amorphous particles were assessed in terms of their physical stability during storage and their drug release during dynamic in vitro lipolysis. The release of CRV during in vitro lipolysis was shown to be mainly dependent on the PS65 concentration in the coating layer, with a PS65 concentration of 20% (w/w) resulting in an immediate release profile. The physical stability of the amorphous CRV core, however, was negatively affected by the lipid coating, resulting in the recrystallization of CRV at the interface between the crystalline lipid layer and the amorphous drug core. Our study demonstrated the feasibility of lipid spray coating of amorphous CRV as a strategy to modify the drug release from amorphous systems but at the same time highlights the importance of surface-mediated processes for the physical stability of the amorphous form.

On the Structure of Solid Lipid Nanoparticles.

Solid lipid nanoparticles (SLNs) have a crystalline lipid core which is stabilized by interfacial surfactants. SLNs are considered favorable candidates for drug delivery vehicles since their ability to store and release organic molecules can be tailored through the identity of the lipids and surfactants used. When stored, polymorphic transitions in the core of drug-loaded SLNs lead to the premature release of drug molecules. Significant experimental studies have been conducted with the aim of investigating the physicochemical properties of SLNs, however, no molecular scale investigations have been reported on the behaviors that drive SLN formation and their polymorphic transitions. A combination of small angle neutron scattering and all-atom molecular dynamics simulations is therefore used to yield a detailed atomistic description of the internal structure of an SLN comprising triglyceride, tripalmitin, and the nonionic surfactant, Brij O10 (C18:1 E10 ). The molecular scale mechanisms by which the surfactants stabilize the crystalline structure of the SLN lipid core are uncovered. By comparing these results to simulated liquid and solid aggregates of tripalmitin lipids, how the morphology of the lipids vary between these systems is demonstrated providing further insight into the mechanisms that control drug encapsulation and release from SLNs.

Neutron diffraction of deuterated tripalmitin and the influence of shear on its crystallisation.

This neutron diffraction study of deuterated tripalmitin has provided further insight into a forensic observation of the crystallisation of lipids under high-shear conditions. To achieve this, an experimental set up was designed to enable simultaneous rheological data from a Couette cell to be recorded with neutron powder diffraction, enabling the influence of shear on the polymorph transformation on cooling to be monitored in real time. Tripalmitin was observed to directly transform from a liquid phase to a ß polymorph under the influence of shear. Although the liquid to ß transition was not observed to be influenced by shear rate, the degree of crystallinity, qualitatively denoted by an increase in the sharpness of the diffraction peaks, was observed at higher shear rates. Evidence is also presented that the rate of cooling influences the ordering in the ß-polymorph produced in zero shear conditions.

Influence of Absorbable Calcium Sulfate-Based Bone Substitute Materials on Human Haemostasis-In Vitro Biological Behavior of Antibiotic Loaded Implants.

Calcium sulfate (CS) formulations are frequently implanted as antibiotically impregnated bone substitutes in orthopedic and trauma surgery to prevent or treat bone infections. Calcium ions have been discussed as candidates to accelerate blood coagulation. The goal of this study is to evaluate substance-specific influences of CS formulations on blood coagulation. Specific ELISAs were conducted to determine markers of activated blood coagulation after incubation of human blood with CS beads. Additionally, wettability with freshly drawn human blood was measured. Three different types of CS bone substitute beads were compared (CS dihydrate with tripalmitin, containing Gentamicin (Herafill®-G: Group A) or Vancomycin (CaSO4-V: Group B); and a CS hemihydrate with Tobramycin (Osteoset®: Group C)). Examinations were performed by ELISA assays for F1+2, FXIIa and C3a. Our results prove that none of the CS preparations accelerated single specific assays for activated coagulation markers. This allows the conclusion that neither Herafill®-G (CaSO4-G) nor CaSO4-V alter haemostasis negatively. Blood samples incubated with Osteoset® display an elevated F1+2-activity. The addition of tripalmitin in Herafill®-G shifts the original into a significantly hydrophobic formulation. This was additionally proven by contact angle examination of the three substances with freshly drawn human blood, showing that acceleration of plasmatic coagulation is hindered by lipids and induced by surface effects caused by presence of rapidly soluble calcium ions in the Osteoset® preparation.

Surface engineering of Solid Lipid Nanoparticle assemblies by methyl α-d-mannopyranoside for the active targeting to macrophages in anti-tuberculosis inhalation therapy.

This study describes the development of new mannosylated Solid Lipid Nanoparticle assemblies (SLNas) delivering rifampicin for an inhaled treatment of tuberculosis. SLNas were surface engineered with mannose residues to recognize mannose receptors located on infected alveolar macrophages and facilitate cell internalization. Two sets of SLNas were produced by the melt emulsifying technique using biocompatible lipid components, i.e. cholesteryl myristate combined with palmitic acid (PA set) or tripalmitin (TP set), in the presence of the targeting moiety, methyl α-d-mannopyranoside. Mannosylated SLNas were examined for their physical properties, drug payloads and release, as well as respirability in terms of emitted dose and respirable fraction determined by Next Generation Impactor. The most appropriate formulations were assessed for mannosylation using FTIR, XPS, SEM coupled with EDX analysis, and wettability assay, in comparison with the respective non-functionalized SLNas. Besides, cytotoxicity and cell internalization ability were established on J774 murine macrophage cell line. Mannosylated SLNas exhibited physical properties suitable for alveolar macrophage passive targeting, adequate rifampicin payloads (10-15%), and feasible drug maintenance within SLNas along the respiratory tract before macrophage internalization. Despite respirability impaired by powder cohesiveness, surface mannosylation provided quicker macrophage phagocytosis, giving evidence of an active targeting promotion.

Development of solvent systems with room temperature ionic liquids for the countercurrent chromatographic separation of very nonpolar lipid compounds.

Solvent systems are not readily available for the separation of very nonpolar compounds by countercurrent chromatography (CCC). In this study we therefore evaluated the suitability of room temperature ionic liquids (IL) in organic solvents for the CCC separation of the extremely nonpolar lipid compounds tripalmitin (PPP) and cholesteryl stearate (CS). The four IL tested were [C10mim][OTf], [C2mim][NTf2], [P66614][NTf2], and [P66614][Cl]. Search for a CCC-suited solvent system started with solubility studies with fourteen organic solvents. Following this, combinations were made with one organic solvent miscible and one organic solvent immiscible with IL (147 combinations). Twenty-four initially monophasic mixtures of two organic solvents became biphasic by adding IL. Several unexpected results could be observed. For instance, n-hexane and n-heptane became biphasic with [P66614][Cl]. Further nine systems became biphasic although the IL was not miscible in any of the two components. These 33 solvent systems were investigated with regard to phase ratio, settling time, share of IL in the upper phase and last not least the KU/L values of PPP and CS, which were 8.1 and 7.7 respectively. The most promising system, n-heptane/chloroform/[C10mim][OTf] (3:3:1, v/v/v) allowed a partial separation of PPP and CS by CCC which was not achieved beforehand.

Quercetin-Loaded Solid Lipid Nanoparticle Dispersion with Improved Physicochemical Properties and Cellular Uptake.

The objective of this study was to formulate and characterize properties of solid lipid nanoparticle (SLN) dispersion containing quercetin. SLN was prepared by ultrasonication method using tripalmitin and lecithin as lipid core and then the surface was coated with chitosan. Entrapment efficiency was greater than 99%, and mean particle size of SLN was 110.7 ± 1.97 nm with significant increase in the coated SLN (c-SLN). Zeta potential was proportionally increased and reached plateau at 5% of chitosan coating with respect to tripalmitin. Differential scanning calorimetry showed disappearance of endothermic peak of quercetin in SLNs, indicating conversion of crystalline state to amorphous state. FTIR study of SLNs showed no change in the spectrum of quercetin, which indicates that the lipid and chitosan were not incompatible with quercetin. When coating amount was greater than 2.5% of tripalmitin, particle size and zeta potential were very stable even at 40°C up to 90 days. All SLN dispersions showed significantly faster release profile compared to pure quercetin powder. At pH 7.0, the release rate was increased in proportion to the coating amount. Interestingly, at pH 3.0, chitosan coating of 5.0% or greater decreased the rate. Cellular uptake of quercetin was performed using Caco-2 cells and showed that all SLN dispersions were significantly better than quercetin dispersed in distilled water. However, cellular uptake of quercetin from c-SLN was significantly lower than that from uncoated SLN.

Lysozyme-loaded lipid-polymer hybrid nanoparticles: preparation, characterization and colloidal stability evaluation.

CONTEXT: Lipid-polymer hybrid nanoparticles (LPNPs) are polymeric nanoparticles enveloped by lipid layers, which have emerged as a potent therapeutic nanocarrier alternative to liposomes and polymeric nanoparticles. OBJECTIVE: The aim of this work was to develop, characterize and evaluate LPNPs to deliver a model protein, lysozyme. MATERIALS AND METHODS: Lysozyme-loaded LPNPs were prepared by using the modified w/o/w double-emulsion-solvent-evaporation method. Poly-ɛ-caprolactone (PCL) was used as polymeric core material and tripalmitin:lechitin mixture was used to form a lipid shell around the LPNPs. LPNPs were evaluated for particle size distribution, zeta potential, morphology, encapsulation efficiency, in vitro drug release, stability and cytotoxicity. RESULTS: The DLS measurement results showed that the particle size of LPNPs ranged from 58.04 ± 1.95 nm to 2009.00 ± 0.52 nm. The AFM and TEM images of LPNPs demonstrate that LPNPs are spherical in shape. The protein-loading capacity of LPNPs ranged from 5.81% to 60.32%, depending on the formulation parameters. LPNPs displayed a biphasic drug release pattern with a burst release within 1 h, followed by sustained release afterward. Colloidal stability results of LPNPs in different media showed that particle size and zeta potential values of particles did not change significantly in all media except of FBS 100% for 120 h. Finally, the results of a cellular uptake study showed that LPNPs were significantly taken up by 83.3% in L929 cells. CONCLUSION: We concluded that the LPNPs prepared with PCL as polymeric core material and tripalmitin:lechitin mixture as lipid shell should be a promising choice for protein delivery.

Microscopic approach of the crystallization of tripalmitin and tristearin by microscopy.

The crystallization behavior of lipids has important implications in industrial processing of food products, whose physical characteristics depend largely on crystallized fats. The study of the crystallization behavior and polymorphism of a pure lipid system is of great scientific importance as a means of gaining an understanding of the phenomena involved, serving as basic knowledge to help guide the addition or removal of these compounds in different raw materials. The crystallization behavior and polymorphism of pure tripalmitin (PPP) and tristearin (SSS) were investigated by Polarized Light Microscopy (PLM) and Differential Scanning Calorimetry (DSC) under different crystallization conditions. The polymorphic forms (ß' and ß) of PPP and SSS exhibited different morphologies depending on how they were obtained, either from α form recrystallization or from isotropic melt. Crystallization in the ß form was faster in SSS than in PPP, indicating that the process occurs faster in TAGs composed of longer fatty acid chains. Both ß' and ß polymorphic forms were obtained from α form recrystallization, albeit with predominance of the ß form.

Morphology and functions of astrocytes cultured on water-repellent fractal tripalmitin surfaces.

In the brain, astrocytes play an essential role with their multiple functions and sophisticated structure, as surrounded by a fractal environment which has not been available in our traditional cell culture. Water-repellent fractal tripalmitin (PPP) surfaces can imitate the fractal environment in vivo, so the morphology and biochemical characterization of astrocytes on these surfaces are examined. Water-repellent fractal PPP surface can induce astrocytes to display sophisticated morphology with smaller size of cell area, longer and finer filopodium-like processes, and higher morphological complexity. The super water-repellent fractal PPP surface with water contact angle of 150°âˆ¼160° produces the maximal effects compared with other surfaces at lower water contact angles. The trends of characteristic protein expression, including that of nestin, vimentin, GFAP and glutamine synthetase, for astrocytes cultured on super water-repellent fractal PPP surfaces approximate more to in vivo pattern. The super water-repellent PPP surface also render astrocytes to perform more pronounced promotion of neurogenesis by increasing the release of nerve growth factor in a co-culture system. Altogether, our results suggest that the super water-repellent fractal PPP surface facilitates the astrocytes to mimic their in vivo performance, thus provides a closer-to-natural culture environment for experimental assessment of glial structure and functions.

Design and evaluation of solid lipid nanoparticles modified with peptide ligand for oral delivery of protein drugs.

Designing feasible and effective peptide ligand modified solid lipid nanoparticles (SLNs) to improve oral bioavailability of protein drugs and evaluating the influence of mucus remains important. In the present work, two kinds of peptide ligand modified SLNs loaded with salmon calcitonin (sCT), namely, sCT CSK-SLNs and sCT IRQ-SLNs, were prepared by coupling the peptide ligand CSKSSDYQC (CSK) which was reported to show affinity with goblet cells, or IRQRRRR (IRQ), a cell penetrating peptide, to polyoxyethylene (40) stearate (SA-PEG2000). Compared with unmodified SLNs, CSK or IRQ modified SLNs with better drug protection ability could facilitate the internalization of drug on Caco-2/HT29-MTX co-cultured cells and permeation in excised rat duodenum mucosa. The internalization mechanism of two kinds of peptide ligand modified SLNs was mainly active transport via both clathrin- and caveolae-dependent endocytosis. Although mucus was an impediment to the transport of SLNs, the peptide ligand modified SLNs still showed improved drug absorption. The absolute bioavailability of sCT CSK-SLNs (12.41 ± 3.65%) and sCT IRQ-SLNs (10.05 ± 5.10%) raised to 2.45-fold and 1.98-fold compared with unmodified SLNs (5.07 ± 0.54%), implying the feasibility and effectiveness of CSK and IRQ peptide modification for the enhancement of the oral bioavailability of protein drugs. In summary, the nanoparticles modified with CSK or IRQ peptide ligand could be the potential carriers for the transport of protein drugs across intestinal barriers.

Solid lipid particles for oral delivery of peptide and protein drugs I--elucidating the release mechanism of lysozyme during lipolysis.

The mechanism of protein release from solid lipid particles was investigated by a new lipolysis model in a biorelevant medium containing both bile salts and phospholipids. Lysozyme, a model protein, was formulated into solid lipid particles using four different types of lipids, two triglycerides with different chain-length of fatty acyl groups i.e. trimyristin (TG14) and tristearin (TG18), and two lipid blends dominated by diglycerides and monoglycerides, respectively. The release of lysozyme from the solid lipid particles and the lipid hydrolysis process were assessed in the lipolysis model, while the change in particle surface during the lipolysis process was evaluated using scanning electron microscopy. The lysozyme release profiles from TG14 and TG18 as well as diglyceride particles correlated well with the release of free fatty acids from the lipid particles during the lipolysis and therefore exhibited a lipase-mediated degradation-based release mechanism. The release of lysozyme from monoglyceride particles was independent on lipase degradation due to the instability of the lipid matrix in the lipolysis medium. In conclusion, the established lipolysis model is successfully used to elucidate the drug release mechanism from solid lipid particles and can potentially be used in rational selection of lipid excipients for oral delivery of peptide/protein drugs.

New surface-modified solid lipid nanoparticles using N-glutaryl phosphatidylethanolamine as the outer shell.

BACKGROUND: Solid lipid nanoparticles (SLNs) are colloidal carrier systems which provide controlled-release profiles for many substances. In this study, we prepared aqueous dispersions of lipid nanoparticles using a modified, pH-sensitive derivative of phosphatidylethanolamine. METHODS: SLNs were prepared using polysorbate 80 as the surfactant and tripalmitin glyceride and N-glutaryl phosphatidylethanolamine as the lipid components. Particle size, polydispersity index, and zeta potential were examined by photon correlation spectroscopy. Morphological evaluation was performed using scanning electron microscopy, atomic force microscopy, and differential scanning calorimetry. RESULTS: Photon correlation spectroscopy revealed a particle hydrodynamic diameter of 165.8 nm and zeta potential of -41.6.0 mV for the drug-loaded nanoparticles. Atomic force microscopy investigation showed the nanoparticles to be 50-600 nm in length and 66.5 nm in height. Differential scanning calorimetry indicated that the majority of SLNs possessed less ordered arrangements of crystals compared with corresponding bulk lipids, which is favorable for improving drug-loading capacity. Drug-loading capacity and drug entrapment efficiency values for the SLNs were 25.32% and 94.32%, respectively. CONCLUSION: The SLNs prepared in this study were able to control the release of triamcinolone acetonide under acidic conditions.