Crystal structures of 1,1'-bis-(carb-oxy-meth-yl)-4,4'-bipyridinium derivatives.

The crystal structures of 2-[1'-(carb-oxy-meth-yl)-4,4'-bi-pyridine-1,1'-diium-1-yl]acetate tetra-fluoro-borate, C14H13N2O4 +·BF4 - or (Hbcbpy)(BF4), and neutral 1,1'-bis-(carboxyl-atometh-yl)-4,4'-bi-pyridine-1,1'-diium (bcbpy), C14H20N2O8, are reported. The asymmetric unit of the (Hbcbpy)(BF4) consists of a Hbcbpy+ monocation, a BF4 - anion, and one-half of a water mol-ecule. The BF4 - anion is disordered. Two pyridinium rings of the Hbcbpy+ monocation are twisted at a torsion angle of 30.3 (2)° with respect to each other. The Hbcbpy monocation contains a carb-oxy-lic acid group and a deprotonated carboxyl-ate group. Both groups exhibit both a long and a short C-O bond. The cations are linked by inter-molecular hydrogen-bonding inter-actions between the carb-oxy-lic acid and the deprotonated carboxyl-ate group to give one-dimensional zigzag chains. The asymmetric unit of the neutral bcbpy consists of one-half of the bcbpy and two water mol-ecules. In contrast to the Hbcbpy+ monocation, the neutral bcbpy mol-ecule contains two pyridinium rings that are coplanar with each other and a carboxyl-ate group with similar C-O bond lengths. The mol-ecules are connected by inter-molecular hydrogen-bonding inter-actions between water mol-ecules and carboxyl-ate groups, forming a three-dimensional hydrogen-bonding network.

Disrupted H2 synthesis combined with methyl viologen treatment inhibits photosynthetic electron flow to synergistically enhance glycogen accumulation in the cyanobacterium Synechocystis sp. PCC 6803.

Under nitrogen deprivation (-N), cyanobacterium Synechocystis sp. PCC 6803 exhibits growth arrest, reduced protein content, and remarkably increased glycogen accumulation. However, producing glycogen under this condition requires a two-step process with cell transfer from normal to -N medium. Metabolic engineering and chemical treatment for rapid glycogen accumulation can bypass the need for two-step cultivation. For example, recent studies indicate that individually disrupting hydrogen (H2) or poly(3-hydroxybutyrate) (PHB) synthesis, or treatment with methyl viologen (MV), effectively increases glycogen accumulation in Synechocystis. Here we explore the effects of disrupted H2 or poly(3-hydroxybutyrate) synthesis, together with MV treatment to on enhanced glycogen accumulation in Synechocystis grown in normal medium. Wild-type cells without MV treatment exhibited low glycogen content of less than 6% w/w dry weight (DW). Compared with wild type, disrupting PHB synthesis combined with MV treatment did not increase glycogen content. Disrupted H2 production without MV treatment yielded up to 11% w/w DW glycogen content. Interestingly, when combined, disrupted H2 production with MV treatment synergistically enhanced glycogen accumulation to 51% and 59% w/w DW within 3 and 7 days, respectively. Metabolomic analysis suggests that MV treatment mediated the conversion of proteins into glycogen. Metabolomic and transcriptional-expression analysis suggests that disrupted H2 synthesis under MV treatment positively influenced glycogen synthesis. Disrupted H2 synthesis under MV treatment significantly increased NADPH levels. This increased NADPH content potentially contributed to the observed enhancements in antioxidant activity against MV-induced oxidants, O2 evolution, and metabolite substrates levels for glycogen synthesis in normal medium, ultimately leading to enhanced glycogen accumulation in Synechocystis. KEY MESSAGE: Combining disrupted hydrogen-gas synthesis and the treatment by photosynthesis electron-transport inhibitor significantly enhance glycogen production in cyanobacteria.

Polymeric viologen-based electron transfer mediator for improving the photoelectrochemical water splitting on Sb2Se3 photocathode.

The photogenerated charge carrier separation and transportation of inside photocathodes can greatly influence the performance of photoelectrochemical (PEC) H2 production devices. Coupling TiO2 with p-type semiconductors to construct heterojunction structures is one of the most widely used strategies to facilitate charge separation and transportation. However, the band position of TiO2 could not perfectly match with all p-type semiconductors. Here, taking antimony selenide (Sb2Se3) as an example, a rational strategy was developed by introducing a viologen electron transfer mediator (ETM) containing polymeric film (poly-1,1'-dially-[4,4'-bipyridine]-1,1'-diium, denoted as PV2+) at the interface between Sb2Se3 and TiO2 to regulate the energy band alignment, which could inhibit the recombination of photogenerated charge carriers of interfaces. With Pt as a catalyst, the constructed Sb2Se3/PV2+/TiO2/Pt photocathode showed a superior PEC hydrogen generation activity with a photocurrent density of -18.6 mA cm-2 vs. a reversible hydrogen electrode (RHE) and a half-cell solar-to-hydrogen efficiency (HC-STH) of 1.54% at 0.17 V vs. RHE, which was much better than that of the related Sb2Se3/TiO2/Pt photocathode without PV2+ (-9.8 mA cm-2, 0.51% at 0.10 V vs. RHE).

Integration of Functional Groups to Enhance the Solubility and Stability of Viologen in Aqueous Organic Redox Flow Batteries.

The chemical stability and energy density of redox couples are crucial factors in enhancing the durability and cost competitiveness of aqueous flow batteries. This study proposed integrating functional groups to viologen anolyte to increase its solubility and, consequently, energy density and stability for prolonged performance. Specifically, sulfonate and ester groups were selectively incorporated at the nitrogen sites of viologen to enhance solubility, leveraging their asymmetry and double hydrophilicity. Furthermore, an alpha-methyl group was introduced between the bipyridine and ester groups to enhance the chemical stability by preventing stacking and dimerization that can lead to irreversible degradation. The modified viologen demonstrated a remarkable solubility of 3.0 M in deionized water, corresponding to a volumetric capacity of 80.404 Ah L-1. Additionally, the designed viologen exhibits outstanding retention of 92.4% after 200 cycles with a minimal capacity fading rate of 0.055% per cycle in a 0.1 M flow cell test.

pH-Controllable Redox Responsive Amphiphilic Viologens for Switchable Emulsions.

A pH and redox dual responsive amphiphilic viologen is synthesized, which can be reversibly transformed among the zwitterionic (SVa), monovalent anionic (SV+), and divalent anionic (SVH2+) forms upon pH variation, exhibiting pH-controllable redox responsive properties. Switchable Pickering emulsions with different droplet size and viscosity are prepared by the mixture of hydrophilic silica nanoparticles and the viologens (SV+ or SVH2+) at acidic conditions, while such combination yielded an oil-in-dispersion emulsion at neutral pH value. Not only can rapid reversible demulsification/stabilization of the Pickering emulsions be achieved by redox reactions, but the rate of redox-demulsification can also be controlled by pH trigger. The dual-responsive amphiphilic viologens have potential applications in developing intelligent colloid materials and molecular logic systems.

Viologen-Cucurbit[7]uril Based Polyrotaxanated Covalent Organic Networks: A Metal Free Electrocatalyst for Oxygen Evolution Reaction.

Viologen-based covalent organic networks represent a burgeoning class of materials distinguished by their captivating properties. Here, supramolecular chemistry is harnessed to fabricate polyrotaxanated ionic covalent organic polymers (iCOP) through a Schiff-base condensation reaction under solvothermal conditions. The reaction between 1,1'-bis(4-aminophenyl)-[4,4'-bipyridine]-1,1'-diium dichloride (DPV-NH2) and 1,3,5-triformylphloroglucinol (TPG) in various solvents yields an iCOP-1 and iCOP-2. Likewise, employing cucurbit[7]uril (CB[7]) in the reaction yielded polyrotaxanated iCOPs, denoted as iCOP-CB[7]-1 and iCOP-CB[7]-2. All four iCOPs exhibit exceptional stability under the acidic and basic conditions. iCOP-CB[7]-2 displays outstanding electrocatalytic Oxygen Evolution Reaction (OER) performance, demanding an overpotential of 296 and 332 mV at 10 and 20 mA cm-2, respectively. Moreover, the CB[7] integrated iCOP-2 exhibits a long-term stable nature for 30 h in 1 m KOH environment. Further, intrinsic activity studies like TOF show a 4.2-fold increase in generation of oxygen (O2) molecules than the bare iCOP-2. Also, it is found that iCOP-CB[7]-2 exhibits a high specific (19.48 mA cm-2) and mass activity (76.74 mA mg-1) at 1.59 V versus RHE. Operando-EIS study evident that iCOP-CB[7]-2 commences OER at a relatively low applied potential of 1.5 V versus RHE. These findings pave the way for a novel approach to synthesizing various mechanically interlocked molecules through straightforward solvothermal conditions.

One-step achieving high performance all-solid-state and all-in-one flexible electrochromic supercapacitor by polymer dispersed electrochromic device strategy.

Electrochromic devices (ECD) are widely used to regulate the transmittance of sunlight by applying a small voltage, but the drawbacks like complex layer-by-layer preparation procedures and inconvenient assembling process still exist. To address these problems, gel or solution-type all-in-one ECDs were recently developed for the simple structure, however, the leakage risk and absence of flexible large-area production have limited real applications. Herein, a novel all-solid-state and all-in-one flexible ECD was reported by originally developed polymer dispersed electrochromic device (PDECD) strategy. This all-solid-state flexible ECD could be efficiently prepared only by one step of phase separation without any extra treatment, and demonstrated outstanding stability (92.1 % of original ΔT remained after 10,000 cycles), high coloration efficiency (197 cm2/C), low power consumption (86.4 µW/cm2) and satisfied response time (≤12 s). Meanwhile, the stored power in ECD during coloring process could drive a LED with excellent cyclic stability (93 % of original capacity remained after 3000 cycles), implying that ECD could also serve as an idea electrochromic supercapacitor. What'more, a reported largest viologen-based all-solid-state flexible ECD (17.8 × 13.2 cm2) with robust bending resistance (up to 1000 bending cycles) was successfully fabricated with industrial roller coating technique, which indicated the huge potential in real world.

Hydroxide Ion Conduction through Viologen-Based Covalent Organic Frameworks (vCOFs): An Approach toward the Advancement.

Alkaline fuel cells rely on the movement of hydroxide anions (OH-) for their operation, yet these anions face challenges in efficient conduction due to their limited diffusion coefficient and substantial mass compared to proton (H+) transport. Within the covalent organic framework structure, ordered channels offer a promising solution for the OH- ion transport. Herein, we synthesized a cationic covalent organic framework (vTAPA) via the solvothermal-assisted Zincke reaction. vTAPA showcases excellent stability in harsh basic solution (12 M) and a wide range of pH. This framework facilitates OH- conduction through its one-dimensional network through the anion exchange process. We employed various tertiary ammonium salts (tetramethyl, tetraethyl, and tetrabutyl ammonium hydroxide) to exchange trapped anionic chloride ions inside the vTAPA structure with OH- ions. The density functional theory (DFT) study exhibited that the anion exchange process is very favorable, as the vTAPA framework offers preferable interaction sites for OH- ions. The impact of steric hindrance from these tertiary ammonium salts on the OH- conduction performance was extensively investigated. Butyl@vTAPA exhibited a high OH- ion conductivity of 1.05 × 10-4 S cm-1 at 90 °C under 98% relative humidity (RH). Our uniquely designed cationic covalent organic frameworks (COF) created a platform for a preferential transport network of hydroxide ions, and this is the first report of directly used COFs for hydroxide ion conduction without any vigorous postsynthetic modification.

A series of viologen/POM materials with discoloration properties under the stimulation of X-ray, UV, electricity, and organic amines.

At present, viologen-based compounds can undergo reversible chemical/physical changes under external stimuli such as light and electricity. This makes these compounds have potential applications in smart windows, displays, and sensors. In order to obtain such materials, three viologen-POM inorganic-organic hybrid compounds have been successfully synthesized by a hydrothermal method, namely {[Cu2(cybpy)8(α-P2W18O62)2}·18H2O (1), (Hbpy)·(cybpy)·[H4(α-P2W18O62)]}·32H2O (2) and {(Hcybpy)2(ß-Mo8O26)}·2H2O (3) (cybpy·Br = 1-cyclobutylmethyl-[4,4']bipyridinyl-1-ium bromide, bpy = 4,4'-bipyridine). Three compounds exhibit good discoloration behaviors under various external stimuli, especially under the stimulation of X-ray, UV, electricity, and organic amines. In addition, in order to promote the compounds in the actual production of more applications, they were doped into the polymer matrix to construct hybrid films, which not only have the same response to external stimulation but also increase the repeatability of the photochromic process. Moreover, 1-3 powder samples in ethanol solution were ultrasonic treated and deposited on filter paper, which can be successfully used in erasable inkless printing.

Superior Electrochemical Water Splitting and Energy-Storage Performances of In Situ Fabricated Charge-Separated Metal Organophosphonate Single Crystals.

The design and exploration of advanced materials as a durable multifunctional electrocatalyst toward sustainable energy generation and storage development is the most perdurable challenge in the domain of renewable energy research. Herein, a facile in situ solvothermal approach has been adopted to prepare a methylviologen-regulated crystalline metal phosphonate compound, [C12H14N2][Ni(C11H11N2)(H2hedp)2]2•6H2O (NIT1), (H4hedp = 1-hydroxyethane 1,1-diphosphonic acid) and well characterized by several techniques. The as-prepared NIT1 displays excellent bifunctional electrocatalytic activity with dynamic stability toward oxygen evolution reaction (η10 = 288 mV) and hydrogen evolution reaction (η10 = 228 mV) in alkaline (1.0 M KOH) and acidic mediums (0.5 M H2SO4), respectively. Such a low overpotential and Tafel slope (68 mV/dec for OER; 56 mV/dec for HER) along with long-term durability up to 20 h of NIT1 make it superior to benchmark the electrocatalyst and various nonprecious metal-based catalysts under similar experimental condition. Further, the electrochemical supercapacitor measurements (in three-electrode system) reveal that the NIT1 electrode possesses much higher specific capacity of 187.6 C g-1 at a current density of 2 A g-1 (272 C g-1 at 5 mV s-1) with capacitance retention of 75.2% over 10,000 cycles at 14 A g-1 (Coulombic efficiency > 99%) in 6 M KOH electrolyte medium. Finally for a practical application, an asymmetric supercapacitor device (coin cell) is assembled by NIT1 material. The as-fabricated device delivers the maximum energy density of 39.4 Wh kg-1 at a power density of 450 W kg-1 and achieves a wide voltage window of 1.80 V. Notably, the device endures a remarkable cycle performance with cyclic retention of 92% (Coulombic efficiency > 99%) even after 14,000 charge/discharge cycles at 10 A g-1. Nevertheless, the extraordinary electrochemical activities toward OER and HER as well as the high-performance device fabrication for LED illumination of such a noble metal-free lower-dimensional charge-transfer compound are truly path breaking and would be promising for the development of advanced multifunctional materials.

Membrane-anchoring selenophene viologens for antibacterial photodynamic therapy against periodontitis via restoring subgingival flora and alleviating inflammation.

Antibacterial photodynamic therapy (aPDT) has emerged as a promising strategy for treating periodontitis. However, the weak binding of most photosensitizers to bacteria and the hypoxic environment of periodontal pockets severely hamper the therapeutic efficacy. Herein, two novel oxygen-independent photosensitizers are developed by introducing selenophene into viologens and modifying with hexane chains (HASeV) or quaternary ammonium chains (QASeV), which improve the adsorption to bacteria through anchoring to the negatively charged cell membrane. Notably, QASeV binds only to the bacterial surface of Porphyromonas gingivalis and Fusobacterium nucleatum due to electrostatic binding, but HASeV can insert into their membrane by strong hydrophobic interactions. Therefore, HASeV exhibits superior antimicrobial activity and more pronounced plaque biofilm disruption than QASeV when combined with light irradiation (MVL-210 photoreactor, 350-600 nm, 50 mW/cm2), and a better effect on reducing the diversity and restoring the structure of subgingival flora in periodontitis rat model was found through 16S rRNA gene sequencing analysis. The histological and Micro-CT analyses reveal that HASeV-based aPDT has a better therapeutic effect in reducing periodontal tissue inflammation and alveolar bone resorption. This work provides a new strategy for the development of viologen-based photosensitizers, which may be a favorable candidate for the aPDT against periodontitis.

Viologen-based ionic conjugated mesoporous polymer as the electron conveyer for efficient polysulfide trapping and conversion.

The commercialization of lithium-sulfur (Li-S) batteries has been hindered by the shuttle effect and sluggish redox kinetics of lithium polysulfides (LiPSs). Herein, we reported a viologen-based ionic conjugated mesoporous polymer (TpV-Cl), which acts as the cathode host for modifying Li-S batteries. The viologen component serves as a reversible electron conveyer, leading to a comprehensive enhancement in the adsorption of polysulfides and improved conversion rate of polysulfides during the electrochemical process. As a result, the S@TpV-PS cathode exhibits outstanding cycling performance, achieving 300 cycles at 2.0 C (1 C = 1675 mA g-1) with low decay rate of 0.032% per cycle. Even at a high sulfur loading of 4.0 mg cm-2, S@TpV-PS shows excellent cycling stability with a Coulombic efficiency of up to 98%. These results highlight the significant potential of S@TpV-PS in developing high-performance Li-S batteries.

Flexible Composite Electrochromic Device with Long-Term Bistability Based on a Viologen Derivative and Prussian Blue.

Viologen and Prussian blue (PB) exhibit good electrochromic properties, but certain limitations still exist. To improve the electrochromic properties of viologen, a viologen derivative 1,1'-bis(4-(bromomethyl)benzyl)-[4,4'-bipyridine]-1,1'-diium hexafluorophosphate (BBDV) was synthesized, and its electrochromic properties were investigated. Additionally, a flexible composite electrochromic device (FC-ECD) was prepared by using BBDV and PB as active materials. The structure of the FC-ECD was PET-ITO/gel electrolyte-BBDV/PB/PET-ITO. The applied voltage required for the FC-ECD was found to be lower than that of the ECD based on BBDV(FBBDV-ECD). Compared to FBBDV-ECD, FC-ECD exhibited a higher optical contrast (71.42%) and cyclic stability (89.51%). The FC-ECD exhibited multicolor changes under different applied voltages (ranging from -2.0 to +1.6 V). Especially, the color of the FC-ECD remained stable for 14 h after the removal of the applied voltage.

Design and Synthesis of Viologen-based Copolymers for High Performance Li-Dual-Ion Batteries.

Dual-ion batteries based on organic electrodes show great potential to break through the bottlenecks existed in conventional LIBs due to their high specific capacity, lifted working voltage, and environmental benignity. Herein, two innovative viologen-based bipolar copolymers poly(viologen-pyrene-4,5,9,10-tetrone dichloride) (PVPTOCl2 ) and poly(viologen-anthraquinone dichloride) (PVAQCl2 ) were synthesized and applied as high performance cathodes for lithium-dual-ion battery. Bearing the dual-ion storage capability of viologen and carbonyls, as well as the conjugated structure of pyrene-4,5,9,10-tetrone, the synthesized copolymers show remarkable electrochemical performances for LIBs. Compared to PVAQCl2 , PVPTOCl2 shows superior electrochemical performance with high initial specific capacity (235.0 mAh g-1 at 200 mA g-1 ), high reversibility (coulombic efficiency up to 99.96 % at 1 A g-1 ), excellent rate performance (150.3 mAh g-1 at 5 A g-1 ) and outstanding cycling stability (a reversible capacity of 197.5 mAh g-1 at a current density of 1 A g-1 and a low capacity loss per cycle of 0.11‰ during 3000 cycles). Moreover, the charge storage mechanism was systematically investigated by ex-situ FT-IR, ex-situ XPS and DFT calculations. The results clearly reveal the structure-property relationship of the bipolar-molecules, providing a new platform to develop efficient bipolar materials for dual-ion batteries.

Development of a multi-step screening procedure for redox active molecules in organic radical polymer anodes and as redox flow anolytes.

Benzo[d]-X-zolyl-pyridinyl (XO, S, NH) radicals represent a promising class of redox-active molecules for organic batteries. We present a multistep screening procedure to identify the most promising radical candidates. Experimental investigations and highly correlated wave function-based calculations are performed to determine benchmark redox potentials. Based on these, the accuracies of different methods (semi-empirical, density functional theory, wave function-based), solvent models, dispersion corrections, and basis sets are evaluated. The developed screening procedure consists of three steps: First, a conformer search is performed with CREST. The molecules are selected based on the redox potentials calculated using GFN2-xTB. Second, HOMO energies calculated with reparametrized B3LYP-D3(BJ) and the def2-SVP basis set are used as selection criteria. The final molecules are selected based on the redox potentials calculated from Gibbs energies using BP86-D3(BJ)/def2-TZVP. With this multistep screening approach, promising molecules can be suggested for synthesis, and structure-property relationships can be derived.

Design Strategy for Improving Detection Sensitivity in a Bromoplumbate Photochromic Semiconductor.

Reducing the dark current of photodetectors is an important strategy for enhancing the detection sensitivity, but hampered by the manufacturing cost due to the need for controlling the complex material composition and processing intricate interface. This study reports a new single-component photochromic semiconductor, [(HDMA)4(Pb3Br10)(PhSQ)2]n (1, HDMA = dimethylamine cation, PhSQ = 1-(4-sulfophenyl)-4,4'-bipyridinium), by introducing a redox-active monosubstituted viologen zwitterion into inorganic semiconducting skeleton. It features yellow to green coloration after UV irradiation with the sharply dropping intrinsic conductivity of 14.6-fold, and the photodetection detection sensitivity gain successfully doubles. The reason of decreasing conductivity originates from the increasing the band gap of the inorganic semiconducting component and formation of Frenkel excitons with strong Coulomb interactions, thereby decreasing the concentration of thermally excited intrinsic carriers.

Methyl viologen-induced changes in the Arabidopsis proteome implicate PATELLIN 4 in oxidative stress responses.

The photosynthesis-induced accumulation of reactive oxygen species in chloroplasts can lead to oxidative stress, triggering changes in protein synthesis, degradation, and the assembly/disassembly of protein complexes. Using shot-gun proteomics, we identified methyl viologen-induced changes in protein abundance in wild-type Arabidopsis and oxidative stress-hypersensitive fsd1-1 and fsd1-2 knockout mutants, which are deficient in IRON SUPEROXIDE DISMUTASE 1 (FSD1). The levels of proteins that are localized in chloroplasts and the cytoplasm were modified in all lines treated with methyl viologen. Compared with the wild-type, fsd1 mutants showed significant changes in metabolic protein and chloroplast chaperone levels, together with increased ratio of cytoplasmic, peroxisomal, and mitochondrial proteins. Different responses in proteins involved in the disassembly of photosystem II-light harvesting chlorophyll a/b binding proteins were observed. Moreover, the abundance of PATELLIN 4, a phospholipid-binding protein enriched in stomatal lineage, was decreased in response to methyl viologen. Reverse genetic studies using patl4 knockout mutants and a PATELLIN 4 complemented line indicate that PATELLIN 4 affects plant responses to oxidative stress by effects on stomatal closure.

Wireless Electrochemical Gel Actuators.

Soft actuators generate motion in response to external stimuli and are indispensable for soft robots, particularly future miniature robots with complex structure and motion. Similarly to conventional hard robots, electricity is suitable for the stimulation. However, previous electrochemical soft actuators require a tethered connection to a power supply, limiting their size, structure, and motion. Here, wireless electrochemical soft actuators composed of hydrogels and driven by bipolar electrochemistry are reported. Viologen, which dimerizes by one-electron reduction and dissociates by one-electron oxidation, is incorporated in the side chains of the gel networks and works as a reversible cross-link. Wireless and reversible electrochemical actuation of the hydrogels, i.e., muscle-like shrinking and swelling, is demonstrated at microscopic and even macroscopic scales.

Anion-Rocking Chair Batteries with Tuneable Voltage using Viologen- and Phenothiazine Polymer-based Electrodes.

Organic battery electrode materials offer the unique opportunity for full cells to operate in an anion-rocking chair mode. For this configuration a pair of p-type redox-active electrode materials is required with a substantial potential gap between their redox processes. We herein investigate viologen-functionalized polystyrenes as negative electrode paired with a phenothiazine polymer as positive electrode in all-organic full cells. The 10 % crosslinked viologen polymer X10 -PVBV gave better performance than the linear PVBV and was employed in a full cell as negative electrode with cross-linked poly(3-vinyl-N-methylphenothiazine) (X-PVMPT) as positive electrode. Three cell configurations regarding the voltage range were investigated, of which one with an operating potential of 0.9 V gave the highest performance. The full cell delivered a specific discharge capacity of 64 mA h g-1 (of X-PVMPT) in the first cycle and a capacity retention of 79 % after 100 cycles. This is one of only few reported anion rocking chair all-organic cells and the first employing a phenothiazine-based positive electrode material.

Internal Dynamics and Modular Peripheral Binding in Stimuli-Responsive 3 : 2 Host:Guest Complexes.

Now that the chemistry of 1 : 1 host:guest complexes is well-established, it is surprising to note that higher stoichiometry (oligomeric) complexes, especially those with excess host, remain largely unexplored. Yet, proteins tend to oligomerize, affording new functions for cell machinery. Here, we show that cucurbit[n]uril (CB[n]) macrocycles combined with symmetric, linear di-viologens form unusual 3 : 2 host:guest complexes exhibiting remarkable dynamic properties, host self-sorting, and external ring-translocation. These results highlight the structural tunability of cucurbit[8]uril (CB[8]) based 3 : 2 host:guest complexes in water and their responsiveness toward several stimuli (chemicals, pH, redox).