RESUMO
The water in sludge is trapped within the extracellular polymeric substance (EPS) with gelatinous structure, greatly challenging the sludge deep dewatering. In this paper, the effect of the EPS viscoelasticity and the structural characteristics of sludge flocs on water distribution was revealed to provide a highly efficient approach in research on sludge dewatering. After biological, and physical method conditioning, the change of viscoelasticity and sludge network structure before/after EPS extraction was comprehensively explored, together with the sludge dewaterability and water distribution. The results suggested the proportion of capillary water and adsorption water carried in soluble EPS (S-EPS) was 59.17% and 40.83%, and that in tightly bound EPS (TB-EPS) was 54.77% and 45.23%, respectively. By contrast, the capillary water in loosely bound EPS (LB-EPS) accounted for as high as 99.99%. In comparison with raw sludge, adsorption water proportion in TB-EPS and S-EPS was reduced after lysozyme (LZM) or freezing-thaw conditioning, which was ascribed to reduction of EPS viscosity and the weakness of water adsorption capacity. Additionally, the sludge yield stress (τy) value first reduced and then increased with the extraction of EPS. Meanwhile, the consistency coefficient (k) also decreased from 4.23 Pa·sn to 0.006 Pa·sn and then slightly increased after LZM conditioning. This observation indicated the sludge system became sensitive to shearing, and its network structural strength as well as colloid elasticity first weakened and then slightly strengthened. In addition, after LZM or freezing-thaw conditioning, the sludge particle size significantly increased after TB-EPS extraction, while the sludge particle more easily absorbed water molecules, thereby increasing adsorption water and capillary water within the sludge flocs. This phenomenon also resulted in an increasing trend of capillary suction time (CST) after TB-EPS extraction, indicating the deterioration of sludge filtration performance.
Assuntos
Matriz Extracelular de Substâncias Poliméricas , Esgotos , Adsorção , Filtração , Esgotos/química , Eliminação de Resíduos Líquidos/métodos , Água/químicaRESUMO
To elucidate the effects of extracellular polymeric substance (EPS) on the sludge dewaterability, this study comparatively investigated the changes in EPS composition and spatial distribution, together with the sludge dewaterability after lysozyme (LZM) conditioning. The protein concentration in the tightly bound EPS (TB-EPS) increased from 3.47 mg g-1 DS to 4.99 mg g-1 DS within the first 2 min, then gradually decreased, which could be described by a piecewise linear function. Unlike TB-EPS, the protein content variation trend in both soluble EPS (S-EPS) and loosely bound EPS (LB-EPS) followed the typical first-order kinetics. Additionally, the extended DLVO theory was employed in combination with viscoelastic acoustic response analysis to further explore the impact of EPS composition on water adhesion and microbial cell. After the extraction of S-EPS from the conditioned sludge, the adsorption free energy (ΔGadh) of EPS ascended to -61.05 mJ m-2, indicating the weakened microbial hydrophobicity. By contrast, the ΔGadh value declined after the subsequent extraction of LB-EPS and TB-EPS. Meanwhile, the adsorption potential energy between S-EPS and microbial cells showed an increasing trend, whereas the repulsion potential energy between TB-EPS and microbial cells fell to 1.40 × 104 kT, signifying a weakened adsorption capacity to water. Accordingly, the viscosity and shear modulus of each EPS layer were reduced after conditioning, which contributed to the transformation of bound water into free water. These changes reasonably explained the results that the water content in the dewatered sludge after conditioning was reduced to 58.54%, and the bound water content decreased by 15.06%.