Optimizations of luminescent materials for white light emitting diodes toward healthy lighting.

White light emitting diodes (wLEDs) have been widely used as the green lighting sources. The commercial wLEDs devices are mainly achieved through the combination of blue emission chips and yellow phosphors, which offer advantages of high efficiency and long lifetime. However, the color rendering index (CRI) of traditional wLEDs is low due to the lack of red components. In recent years, with the improvement of the quality of life, a lot of efforts have been paid to improve the performance of wLEDs devices related to CRI, correlated color temperature, light uniformity, luminous flux, etc. In this article, we summarize the recent advances on the optimization of wLEDs toward healthy lighting. Brief introductions on the fundamentals of healthy effect of lighting are presented, followed by discussions of current methods to realize wLEDs devices. Special overviews on strategies for luminescent materials of wLEDs in recent years are presented. The opportunities and challenges in the future development of wLEDs lighting devices are also discussed.

Carbon Dots: Synthesis, Characterizations, and Recent Advancements in Biomedical, Optoelectronics, Sensing, and Catalysis Applications.

Carbon nanodots (CNDs), a fascinating carbon-based nanomaterial (typical size 2-10 nm) owing to their superior optical properties, high biocompatibility, and cell penetrability, have tremendous applications in different interdisciplinary fields. Here, in this Review, we first explore the superiority of CNDs over other nanomaterials in the biomedical, optoelectronics, analytical sensing, and photocatalysis domains. Beginning with synthesis, characterization, and purification techniques, we even address fundamental questions surrounding CNDs such as emission origin and excitation-dependent behavior. Then we explore recent advancements in their applications, focusing on biological/biomedical uses like specific organelle bioimaging, drug/gene delivery, biosensing, and photothermal therapy. In optoelectronics, we cover CND-based solar cells, perovskite solar cells, and their role in LEDs and WLEDs. Analytical sensing applications include the detection of metals, hazardous chemicals, and proteins. In catalysis, we examine roles in photocatalysis, CO2 reduction, water splitting, stereospecific synthesis, and pollutant degradation. With this Review, we intend to further spark interest in CNDs and CND-based composites by highlighting their many benefits across a wide range of applications.

Emission enhancement in the luminescence performance of warm red light-emitting LiSrVO4 :Pr3+ phosphors.

Warm red-emitting praseodymium-doped LiSrVO4 phosphors were synthesized via solid-state reaction. The phase formation was verified using an X-ray diffraction study and the morphology was investigated using a scanning electron microscope study. The LiSrVO4 :Pr3+ phosphors emitted red light when exposed to ultraviolet light, indicating their possibility for use in warm white light-emitting diodes (WLEDs). Furthermore, the effect of charge compensators on the luminescence characteristics was addressed. The decay time was investigated using time-resolved photoluminescence. Furthermore, thermal quenching was analyzed through temperature-dependent photoluminescence spectra. Their sensitivity was calculated using temperature-dependent decay time analysis. The colour purity of the emitted light could be measured by photometric analysis. This comprehensive investigation provides a thorough understanding of the luminescence properties of phosphors for WLED applications.

The Role of Anions in Rare-earth Activated Inorganic Host Materials for its Luminescence Characteristics.

This work is inspired from the comprehensive work done by our research team aimed at improving the efficiency of white light emitting diodes (LEDs) through improvements in the colour rendering index of the red light (CRI), one of the primary colours of white light. Such work is triggered through the incorporation of anions (BO33-, PO43-, SO42-), either individually or as an integral part of dopant activated inorganic phosphor host materials. Numerous host materials such as ZnO, Y2O3, Ca3(PO4)2, CaMoO4, ABPO4, ABSO4 (where A represents alkali metals and B alkaline earth metals) have been considered ideal hosts materials for studying luminescence properties of materials (including other phosphors). In addition, red emitting dopants such as Sm3+, Eu3+ and Ce3+ have been incorporated into these host materials to achieve a higher CRI of red colour, an essential component of white light. The role anions in various materials is multifaceted; firstly, it acts as sensitizer whereby it absorbs excitation energy and transfers it non-radiatively to the dopants, secondly, it acts as a charge compensator to dopants with a charge of + 3, thirdly, it creates crystal fields that affects the electronic transitions of the dopants and fourthly, it creates a stable crystal structure that allows for dopant embedding. By understanding the exact role of these anions and their interactions with the host lattice and dopant ions, we could further optimize the luminescent properties of these activated host materials, which leads to higher efficiencies and performances in white light-emitting diodes and other lighting technologies. This work is a comprehensive review of the work undertaken by our research team aimed at enhancing the luminescent properties of WLEDs.

Unravelling the interplay of local structure and valence transitions in Ce-doped CaYAlO4 luminescent materials.

Cerium has been widely used as a dopant in luminescent materials due to its unique electronic configurations. It is generally anticipated that the luminescence properties of rare-earth-doped materials are closely related to the local environment of activators, especially for Ce3+ . In addition, it is convenient to modulate its emission wavelength by adjusting the composition and structure. In this study, we systematically analyzed the microstructure of the Ce-doped CaYAlO4 system at atomic resolution. The quantitive results indicated that the structure distortion greatly influenced the valence state of the Ce dopant, which is critical to its luminescence efficiency. In addition, valence variations also exist from surface to inner structure due to the big distortion area around the surface. Our results unravel the interplay of local structure and valence transitions in Ce-doped aluminate phosphors, which has the potential to be applied in other luminescent materials.

Vinylene-Linked Emissive Covalent Organic Frameworks for White-Light-Emitting Diodes.

Covalent organic frameworks (COFs) have gained considerable attention due to their highly conjugated π-skeletons, rendering them promising candidates for the design of light-emitting materials. In this study, we present two vinylene-linked COFs, namely, VL-COF-1 and VL-COF-2, which were synthesized through the Knoevenagel condensation of 2,4,6-trimethyl-1,3,5-triazine with terephthalaldehyde or 4,4'-biphenyldicarboxaldehyde. Both VL-COF-1 and VL-COF-2 exhibited excellent chemical and thermal stability. The presence of vinylene linkages between the constituent building blocks in these COFs resulted in broad excitation and emission properties. Remarkably, the designed VL-COFs demonstrated bright emission, fast fluorescence decay, and high stability, making them highly attractive for optoelectronic applications. To assess the potential of these VL-COFs in practical devices, we fabricated white-light-emitting diodes (WLEDs) coated with VL-COF-1 and VL-COF-2. Notably, the WLEDs coated with VL-COF-1 achieved high-quality white light emission, closely approximating standard white light. The promising performance of VL-COF-coated WLEDs suggests the feasibility of utilizing COF materials for stable and efficient lighting applications.

Luminescence Studies on Dy3+ Doped Calcium Aluminum Borosilicate (CABS) Glasses for White Light Emission and Applications in w-LEDs.

Dy3+ doped calcium aluminum borosilicate (CABS) glasses have been synthesized via quick melt quench technique. CABS: xDy3+ glasses (x = 0.1, 0.5, 1, 1.5 and 2 mol%) were subjected to various morphological and photoluminescence studies. X-ray diffraction (XRD) and Fourier transform infrared (FT-IR) spectroscopy were conducted to study the structural and bonding nature of the undoped glass. The excitation spectra of Dy3+ doped CABS glasses under 574 nm emission show many sharp peaks amongst which the transition from 6H15/2 → 6P7/2 (351 nm) had the highest intensity. Under 351 nm excitation, glasses exhibit sharp peaks in the blue, yellow and red regions corresponding to the transitions 4F9/2 → 6H15/2, 6H13/2, 6H11/2 and 6H9/2 respectively. The dipole-dipole nature of the interaction between the Dy3+ ions is confirmed via Dexter theory and Inokuti-Hirayama (I-H) model. CIE coordinates estimated from the emission profiles of these glasses under 351 nm excitation fall in the white region. Considering that these glasses exhibit sharp visible emission under UV excitation, have stable yellow to blue (Y/B) ratios and fast decays with intense energy transfers, we propose to utilise these glasses for white light generation and other white light LED (w-LED) and solid-state lighting (SSL) applications.

Photoluminescence enhancement and excellent thermal stability of Ca2ZnSi2O7:Pr3+ red-emitting phosphors through charge compensator A+ (Li+, Na+ and K+) co-doping for w-LED applications.

The red-emitting Ca2ZnSi2O7:Pr3+ phosphor was synthesized via a solid-state method and alkali metal ions A+ (Li+, Na+, K+) were introduced to improve the photoluminescence performance of Pr3+. XRD results confirmed that the sample structure did not change markedly with appropriate Pr3+/A+ co-doping. Under the blue light excitation of 447 nm, the as-prepared Ca2ZnSi2O7:Pr3+ efficiently emitted a characteristic red luminescence peak at 601 nm. The luminescence intensity of Pr3+ was obviously enhanced with A+ co-doping due to the charge compensation effect and the emission intensity of Ca2ZnSi2O7:0.005Pr3+, 0.005Na+ reached 142.1% compared to Ca2ZnSi2O7:0.005Pr3+. Furthermore, at 210 °C the luminescence intensity of the Ca2ZnSi2O7:0.005Pr3+, 0.005Na+ phosphor remained at âˆ¼93% compared to at 30 °C, showing high thermal stability. The w-LED device packaged with Ca2ZnSi2O7:0.005Pr3+, 0.005Na+ produced a bright white emission. All these results indicated the potential application prospects of red-emitting Ca2ZnSi2O7:Pr3+, A+ phosphors in the field of white light-emitting diodes.

Structural, morphological, and optical characteristics of Gd2 Si2 O7 :Dy3+ nanophosphors for WLEDs.

Yellowish-white light-emitting Gd2-x Si2 O7 :xDy3+ (x = 1-5 mol%) nanophosphors were prepared using a solution combustion synthesis method. Fluorescence spectrophotometry and X-ray diffraction measurements were performed to scrutinize the optical performances and phase recognition of the designated nanophosphors. The outcomes specified that the prepared phosphors were crystallized into a triclinic phase with a P-1 space group. As the concentration of Dy3+ ions was increased, the unit-cell volume decrease proportionally due to the replacement of large-sized Gd3+ by small-sized Dy3+ ions. Under ultraviolet excitation at 349 nm, emission spectra consisted of two pronounced emission lines at ~482 nm (blue line), ~578 nm (yellow line), and a relatively weaker emission at ~670 nm (red line) due to 4 F9/2 →6 H15/2 , 4 F9/2 →6 H13/2 , and 4 F9/2 →6 H11/2 intraconfigurational transitions of Dy3+ ions, respectively. The evidence about the site symmetry around Dy3+ ions was examined by considering the ratio of yellow-to-blue emission intensity. The observed critical distance (Rc ) value was ~20.56 Å (≫5 Å), which signified that energy transfer primarily occurred due to multipolar interaction. The obtained coordinates were close to the white region of the Commission Internationale de l'Éclairage chromaticity diagram, which marked a significant milestone in the development of white light-emitting diodes.

Structural, optical, and luminescence properties of Dy3+ -activated potassium calcium silicate phosphor for white light-emitting diodes.

A dysprosium (Dy3+ )-activated potassium calcium silicate (K4 CaSi3 O9 ) phosphor was prepared using a solid-state synthesis route. The phosphor had a cubic structure with the space group Pa 3 ¯ as confirmed using X-ray diffraction (XRD) measurements. Details of surface morphology and elemental composition of the as-synthesized undoped KCS phosphor was obtained using scanning electron microscopy (SEM) and energy-dispersive X-ray (EDX) spectroscopy. The chemical structure as well as the vibrational modes present in the as-prepared KCS phosphor was analyzed using Fourier transform infrared (FT-IR) spectroscopy. Diffuse reflectance spectra (DRS) were used to determine the optical bandgap of the phosphors and were found to be in the optical range 3.52-3.71 eV. Photoluminescence (PL) spectra showed intense yellow emission corresponding to the 4 F9/2 →6 H13/2 transition under 350 nm excitation. Commission International de l'Eclairage colour chromaticity coordinates were evaluated using the PL spectral data lie within the white region. Dexter theory and the Inokuti-Hirayama (I-H) model were applied to study the nature of the energy transfer mechanism in the as-prepared phosphors. The relatively high activation energy of the phosphors was evaluated using temperature-dependent PL (TDPL) data and confirmed the high thermal stability of the titled phosphor. The abovementioned results indicated that the as-prepared KCS:Dy3+ phosphor was a promising candidate for n-UV-based white light-emitting diodes.

New Strategy: Molten Salt-Assisted Synthesis to Enhance Lanthanide Upconversion Luminescence.

Lanthanide-doped upconversion luminescent materials (LUCMs) have attracted much attention in diverse practical applications because of their superior features. However, the relatively weak luminescence intensity and low efficiency of LUCMs are the bottleneck problems that seriously limit their development. Unfortunately, most of the current major strategies of luminescence enhancement have some inherent shortcomings in their implementation. Here, a new and simple strategy of molten salt-assisted synthesis is proposed to enhance lanthanide upconversion luminescence for the first time. As a proof-of-concept, a series of rare earth oxides with obvious luminescence enhancement are prepared by a one-step method, utilizing molten NaCl as the high-temperature reaction media and rare earth chlorides as the precursors. The enhancement factors at different reaction temperatures are systematically investigated by taking Yb3+ /Er3+ co-doped Y2 O3 as an example, which can be enhanced up to more than six times. In addition, the molten salts are extended to all alkali chlorides, indicating that it is a universal strategy. Finally, the potential application of obtained UCL materials is demonstrated in near-infrared excited upconversion white light-emitting diodes (WLEDs) and other monochromatic LEDs.

Preparation and luminescence properties of Ba2P2O7:Dy3+, Ce3+ phosphors.

In this paper, Ba2-x-yP2O7:xDy3+,yCe3+ phosphors are synthesized by calcining the precursor via chemical co-precipitation. The phase structure, excitation and emission spectra, thermal stability, the chromatic performance of phosphors, and energy transfer from Ce3+ to Dy3+ are studied and discussed. The results indicate the samples keep a stable crystal structure as a high-temperature σ-Ba2P2O7 phase with two different coordination of Ba2+ sites. Ba2P2O7:Dy3+ phosphors can be effectively excited by 349 nm n-UV light and emit 485 nm blue light and a relatively stronger yellow light peaking at 575 nm, corresponding to 4F9/2→6H15/2 and 4F9/2→6H13/2 transitions of Dy3+, implying that Dy3+ mainly occupies the non-inversion symmetric sites. By contrast, Ba2P2O7:Ce3+ phosphors exhibit a broadband of excitation peaking at 312 nm, and two symmetrical emission peaks at 336 nm and 359 nm from 5d1→4F5/2 and 5d1→4F7/2 transitions of Ce3+, showing Ce3+ should merely be presumed to occupy Ba1 site. After Dy3+ and Ce3+ are co-doped, Ba2P2O7:Dy3+, Ce3+ phosphors exhibit the enhanced characteristic blue and yellow emission of Dy3+ with nearly equal intensity under excitation at 323 nm, meaning Ce3+ co-doping increases the symmetry of Dy3+ site as well as the sensitizer. Simultaneously, energy transfer from Dy3+ to Ce3+ is found and discussed. The thermal stability of co-doped phosphors was characterized and briefly analyzed. The color coordinates of Ba2P2O7:Dy3+ phosphors fall in the yellow-green region near the white light, while the emission moves towards the blue-green region after the Ce3+ is co-doped.

Boosting Red Luminescence of Mn4+ in Tantalum Heptafluoride Based on an Ab Initio-Facilitated Sensitizer and Hydrophobic Surface Modification.

A narrow-band red-light component is critical to establish high color rendition and a wide color gamut of phosphor-converted white-light-emitting diodes (pc-WLEDs). In this sense, Mn4+-doped K2SiF6 fluoride is the most successful material that has been commercialized. As with K2SiF6:Mn4+ phosphors, Mn4+-doped tantalum heptafluoride (K2TaF7:Mn4+) fulfills a similar luminescence behavior and has been brought in a promising narrow-band red phosphor. But the limited brightness and low moisture-resistant performances have inevitably blocked its practical application. Herein, we employed the density functional theory (DFT)-based ab initio estimation approach to quickly identify the proper sensitizer by systematically investigating the electronic-band coupling between the several possible sensitizers (Rb, Hf, Zr, Sn, Nb, and Mo) and the luminescent center (Mn). Combined with experimental results, Mo was demonstrated to be the optimal sensitizer, which resulted in a 60% enhancement of the emission. On the side, the moisture sensitivity has been effectively improved via grafting the hydrophobic octadecyltrimethoxysilane (ODTMS) layer on the phosphor surface. Through employing the K2TaF7:Mn4+,Mo6+@ODTMS composite as a red component, warm WLEDs with good performance were achieved with a correlated color temperature (CCT) of 4352 K, a luminous efficacy (LE) of 90.1 lm/W, and a color rendering index (Ra) of 83.4. In addition, a wide color gamut reaching up to 102.8% of the NTSC 1953 value could be realized. Aging tests at 85 °C and 85% humidity for 120 h on this device manifested that the ODTMS-modified phosphor had much better moisture stability than that of the unmodified one. These studies provided viable tools for optimizing Mn4+ luminescence in fluoride hosts.

Recent Advances in Multi-Site Luminescent Materials: Design, Identification and Regulation.

The development of novel phosphor materials with excellent performance and modification of their photoluminescence to meet the higher requirements for applications are the essential research subjects for luminescent materials. Multi-site luminescent materials with crystallographic sites for the activator ions that broaden the tunable range of luminescent spectra and even enhance the luminescent performance have attracted significant attention in the pursuit of high-quality luminescence for white light-emitting diodes. Here, we summarize multi-site luminescence characteristics based on the different kinds of host and activator ions, introduce the identifications of multi-site activator ions via optical analysis, provide a structural analysis and theoretical calculation methods, and introduce the regulation strategies and advance applications of multi-site phosphors. The review reveals the relationship between crystal structure and luminescent properties and discusses future opportunities for multi-site phosphors. This will provide guidance for the design and development of luminescent materials or other materials science.

Human-Centric Lighting: Rare-Earth-Free Photoluminescent Materials for Correlated Color Temperature Tunable White LEDs.

Artificial lighting is ubiquitous in modern society, with detrimental effects on sleep and health. The reason for this is that light is responsible not only for vision but also for non-visual functions, such as the regulation of the circadian system. To avoid circadian disruption, artificial lighting should be dynamic, changing throughout the day in a manner comparable to natural light in terms of both light intensity and associated color temperature. This is one of the main goals of human-centric lighting. Regarding the type of materials, the majority of white light-emitting diodes (WLEDs) make use of rare-earth photoluminescent materials; therefore, WLED development is at serious risk due to the explosive growth in demand for these materials and a monopoly on sources of supply. Photoluminescent organic compounds are a considerable and promising alternative. In this article, we present several WLEDs that were manufactured using a blue LED chip as the excitation source and two photoluminescent organic dyes (Coumarin 6 and Nile Red) embedded in flexible layers, which function as spectral converters in a multilayer remote phosphor arrangement. The correlated color temperature (CCT) values range from 2975 K to 6261 K, while light quality is preserved with chromatic reproduction index (CRI) values superior to 80. Our findings illustrate for the first time the enormous potential of organic materials for supporting human-centric lighting.

Enhanced emission intensity in (Li+/Ca2+/Bi3+) ions co-doped NaLa(MoO4)2: Dy3+phosphors and their Judd-Ofelt analysis for WLEDs applications.

In the present study, we have synthesized a series of Dy3+ ion doped NaLa(MoO4)2phosphors by the conventional solid-state method at 750 °C for 4h. All the compounds were crystallized in the tetragonal scheelite type structure with space group (I41/a, No.88). The morphology and functional group were confirmed by the field emission scanning electron microscopy (FE-SEM) and Fourier transform infrared(FTIR)spectroscopy. Upon near-Ultraviolet (n-UV) excitation, the PL spectra exhibit the two characteristic emissions of Dy3+ ions, blue (4F9/2→6H15/2) at 487 nm and yellow (4F9/2→6H13/2) at 574nm respectively. The optimum concentration of Dy3+ionis 3 mol% and then quenching occurred due to multipolar interaction. Further, enhanced the emission intensity by co-doping with monovalent (Li+), divalent (Ca2+) and trivalent (Bi3+) ions. Among them, Li+ ion co-doped samples are shown maximum intensity (50 times) more than Dy3+ doped phosphors as relaxation of parity restriction of electric dipole transition because of local distortion of crystal field around the Dy3+ ions. In addition, by incorporation of Eu3+ ions into NaLa(MoO4)2:Dy3+system, tuned the emission color from white to red, owing to energy transfer from Dy3+ to Eu3+ ions. The intensity parameters (Ω2, Ω4) and radiative properties such as transition probabilities (AT), radiative lifetime (rad), and branching ratio were calculated using the Judd-Ofelt theory. CIE color coordinates, CCT values indicates that these phosphors exhibit an excellent white emission. The determined radiative properties, CIE and CCT results revealed that the Dy3+-activated NaLa(MoO4)2phosphors are potential materials for developing white LEDs, and optoelectronic device fabrications.

Intensity enhancement of photoluminescence in Tb3+ /Eu3+ co-doped Ca14 Zn6 Al10 O35 phosphor for WLEDs.

This article focuses on the effect of monovalent cation doping on the optical properties of rare earth (RE = Eu3+ , Tb3+ ) co-doped Ca14 Zn6 Al10 O35 which has been synthesized by a low temperature combustion method. Crystalline phase of the Ca14 Zn6 Al10 O35 phosphor was examined and confirmed by X-ray diffraction measurement. Under near-ultraviolet light excitation Eu3+ -doped Ca14 Zn6 Al10 O35 phosphor exhibit characterization of Eu3+ emission bands that are located at a maximum wavelength (λmax ) of approximately 470 nm and other peaks centred at 593 nm and 615 nm, respectively. With Tb3+ -doped Ca14 Zn6 Al10 O35 phosphor showing a green emission band centred at 544 nm under near-ultraviolet range. Furthermore, we studied the energy transfer process in Eu3+ /Tb3+ pair and enhancement in photoluminescence (PL) intensity with doping different charge compensation. Here we obtained the optimum PL emission intensity of the phosphor in broad and intense visible spectral range which may be significant for the fabrication of white light emitting diodes (WLEDs).

Synthesis and novel emission properties of Bi3+ -doped Ca2 BO3 Cl phosphor for plant cultivation.

In the present work, a series of Bi3+ -activated Ca2 BO3 Cl phosphors was synthesized using the conventional high-temperature solid-state reaction method. The crystal structure of the prepared sample was determined to be monoclinic with space group P21/c. Scanning electron microscopy (SEM) analysis demonstrated the surface morphology with aggregated particles and sizes in the nano range. The presence of vibrational features and their luminescence characteristics were studied using Fourier transform infrared spectroscopy and photoluminescence (PL) techniques, respectively. At the 486 nm excitation wavelength, the PL spectrum revealed a sharp emission centred at 732 nm that was attributed to the 3 P1 →1 S0 transition of Bi3+ . The emission spectra exhibited the highest emission intensity at 0.5 mol% Bi3+ ion concentration, beyond this the emission intensity decreased due to the concentration quenching phenomenon attributed to multipolar interaction. The Commission Internationale de l'éclairage coordinates located at (0.7347, 0.2653) confirmed emission in the deep-red region with a colour purity of 99.98%. The obtained outcomes suggested that the reported material may be a promising candidate as a red-emitting phosphor for w-LEDs and plant growth applications.

A novel efficient red-emitting K7SrY2B15O30: Eu3+ phosphor with non-concentration quenching and robust thermal stability for white LEDs.

Inhibiting energy migration between Eu3+ ions in a fixed host to get higher doping concentration is a permanent topic. Herein, a novel non-concentration quenching red-emitting K7SrY2-2xB15O30: xEu3+ (0.1 ≤ x ≤ 1.0) phosphor was synthesized via high-temperature sintering method. XRD measurement, Rietveld refinement results, and radius percentage deviation calculation demonstrated the phase purity and the occupation preference of Eu3+ ions. With continuously increasing doping Eu3+ ions, the absence of concentration quenching could be explained by long distance between two Eu3+ (7.012 Å) and the K7SrEu2B15O30 could exhibit striking photoluminescence performance with the highest emission wavelength centered at 617 nm. Meanwhile, under the radiation of 393 nm, the high internal quantum efficiency ( âˆ¼ 78.71 %), excellent color purity ( âˆ¼ 88.32 %) and robust thermal stability whose emission intensity at 140 °C could still reach âˆ¼ 97.31 % could guarantee its potential application. When coating BaMgAl10O17: Eu2+, (Ba, Sr)2SiO4: Eu2+, and K7SrEu2B15O30 on a near-ultraviolet chip, the bright white light with a low correlated color temperature of 4211 K and CIE color coordinates of (0.3675, 0.3556) could be obtained. Taking the analytic results above, the non-concentration quenching K7SrY2B15O30: Eu3+ compound has great potential to act as a candidate for red-emitting phosphors in solid-state lighting field.

Double Perovskite Mn4+-Doped La2CaSnO6/La2MgSnO6 Phosphor for Near-Ultraviolet Light Excited W-LEDs and Plant Growth.

Non-rare earth doped oxide phosphors with far-red emission have become one of the hot spots of current research due to their low price and excellent physicochemical stability as the red component in white light-emitting diodes (W-LEDs) and plant growth. Herein, we report novel Mn4+-doped La2CaSnO6 and La2MgSnO6 phosphors by high-temperature solid-phase synthesis and analyzed their crystal structures by XRD and Rietveld refinement. Their excitation spectra consist of two distinct excitation bands with the dominant excitation range from 250 to 450 nm, indicating that they possess strong absorption of near-ultraviolet light. Their emission is located around 693 and 708 nm, respectively, and can be absorbed by the photosensitive pigments Pr and Pfr, proving their great potential for plant growth. Finally, the prepared samples were coated with 365 nm UV chips to fabricate far-red LEDs and W-LEDs with low correlation color temperature (CCT = 4958 K/5275 K) and high color rendering index (Ra = 96.4/96.6). Our results indicate that La2CaSnO6:Mn4+ and La2MgSnO6:Mn4+ red phosphors could be used as candidate materials for W-LED lighting and plant growth.