Yield of alarm features in predicting significant endoscopic findings among hospitalized patients with dyspepsia.

BACKGROUND: Dyspepsia is a very prevalent upper gastrointestinal tract symptoms complex. Some of these symptoms might arise from serious underlying diseases, so the promotion of evidence-based guidelines could potentially better align evaluation and treatment. AIM: To determine the value of alarm features as a predictive factor for significant endoscopic findings (SEFs) among hospitalized patients presenting with dyspepsia. METHODS: We conducted a retrospective case-control study including information about 6208 endoscopic procedures performed for hospitalized patients. Patients were divided into two groups, with and without SEFs, and compared to elucidate the ability of the different alarm features to predict SEFs. RESULTS: During the study, 605 patients fulfilled the inclusion criteria. When the demographics and clinical characteristics of the two groups were compared, tachycardia (P < 0.05), normocytic anemia, (P < 0.05), leukocytosis (P < 0.05), and hypoalbuminemia (P < 0.05) documented on admission prior to endoscopy were strong predictors of SEFs. Among the alarm features, upper gastrointestinal bleeding, persistent vomiting, odynophagia [odds ratio (OR) = 3.81, P < 0.05; OR = 1.75, P = 0.03; and OR = 7.81, P = 0.07, respectively] were associated with SEFs. Unexplained weight loss was strongly associated with malignancy as an endoscopic finding (OR = 2.05; P < 0.05). In addition, long-term use of anti-aggregate medications other than aspirin (P < 0.05) was correlated to SEFs. CONCLUSION: Novel predictors of SEFs were elucidated in this study. These parameters could be used as an adjunctive in decision making regarding performing upper endoscopy in hospitalized patients with dyspepsia.

Comparison of clinical outcomes between mineral trioxide aggregate and bioceramic materials in pulpotomy for treating early chronic pulpitis in deciduous teeth.

This study aims to elucidate the clinical efficacy of Mineral Trioxide Aggregate (MTA) and Bioceramic Materials in pulpotomy procedures for early-stage chronic pulpitis in deciduous teeth. The clinical data of 100 children with early chronic pulpitis in deciduous teeth treated at our institution between January 2021 and January 2023 were included retrospectively, which were divided into an experimental group (n = 50) and a control group (n = 50) according to the treatment methods. Experimental group received pulpotomy with Thera Cal LC as bioceramic pulp-capping material versus control group with MTA as pulp-capping agent. Comparative studies were conducted to assess the clinical effectiveness and differences between both pulp-capping techniques. At 12 months postoperatively, the experimental group showed a significantly higher success rate than the control group (96.00% vs. 80.00%, p < 0.05). Post-treatment inflammatory markers (Tumor Necrosis Factor-alpha (TNF-α), Interleukin-6 (IL-6) and Interleukin-8 (IL-8)) were substantially lower in the experimental group (p < 0.05). Furthermore, significantly lower pain scores and higher comfort and satisfaction scores were obtained in the experimental group (p < 0.05). Experimental group adverse reactions were also lower in the experimental group (p < 0.05). TheraCal LC bioceramic material treats early chronic pulpitis in deciduous teeth effectively. Clinically, it is an excellent therapeutic option for emergence of permanent dentition, pain relief, comfort and improvement of patient satisfaction.

Experimental study on axial tensile properties of basalt fibre reinforced recycled aggregate concrete.

In order to investigate the tensile properties of basalt fibre reinforced recycled aggregate concrete (BFRAC), the axial tensile tests were carried out on BFRAC specimens using the concrete axial tensile testing device. The effects of basalt fibre (BF) content and recycled aggregate replacement rate on the tensile properties of BFRAC were quantitatively investigated, and the tensile damage mechanism of BFRAC was analysed. The following conclusions were drawn: The volume fraction of BF had the most prominent effect on the axial tensile properties of BFRAC. The axial tensile strength and peak tensile strain of BFRAC both showed the change rule of first increasing and then decreasing with the increase of BF volume fraction. The replacement rate of recycled aggregate is negatively correlated with the tensile properties of BFRAC. The larger the replacement rate, the worse the tensile properties of BFRAC. When the replacement rate of recycled aggregate is 30 % and the volume fraction of BF is 0.3 %, the tensile properties of BFRAC are better, as well as its economic and environmental performance. The axial tensile strength and peak tensile strain were 2.08 MPa and 114 × 10-6, respectively. BFRAC exhibits the toughening and crack arresting effect of BF, and the crack development is relatively slow, showing more obvious plastic damage characteristics.

Comparative Evaluation of the Mechanical and Physical Properties of Mineral Trioxide Aggregate vs. Bacterial Cellulose Nanocrystal-Reinforced Mineral Trioxide Aggregate: An In Vitro Study.

AIM: This study aims to compare and assess the compression strength, microhardness, and surface texture of two sets of materials: mineral trioxide aggregate (MTA) PlusTM and bacterial cellulose nanocrystal (BCNC)-reinforced MTA PlusTM. MATERIALS AND METHODS: According to the ASTM E384 standard, the cylindrical molds made of plexiglass with an internal diameter of 6 mm and a height of 4 mm were fabricated using computer numerical control laser cutting. A total of 20 samples (n=10) in each group were considered in this experimental study: Group I (control group) MTA PlusTM (Prevest DenPro Limited, India) and Group II (experimental group) BCNC (Vedayukt India Private Limited, India)-reinforced MTA PlusTM. After preparation, the molds were incubated at 37°C in a fully saturated condition for about 24 hours, and then the compression strength, microhardness, and scanning electron microscopy analyses were performed at different magnifications. The obtained data were then statistically analyzed. RESULTS: Quantitative analysis revealed that there is a statistically significant difference between MTA PlusTM and BCNC-reinforced MTA PlusTM  (p<0.002). The Wilcoxon signed-rank test and Mann-Whitney U-test revealed that BCNC-reinforced MTA PlusTM  showed significantly higher compression strength (33.80±3.83 MPa, p=0.00) and surface microhardness (642.85±24.00 µm, p=0.00) than the control group. CONCLUSION: Based on our findings, it was concluded that there is a statistically significant difference between both study groups. Thus, incorporating BCNC into the MTA PlusTM  significantly increased the compression strength and surface microhardness of the MTA PlusTM cement. CLINICAL SIGNIFICANCE: Numerous dental applications have been investigated for bacterial cellulose. Many benefits of bacterial cellulose are available, which include its effects on moldability, low cost, high water retention capacity, biocompatibility, and biodegradability. Furthermore, the addition of BCNC to MTA PlusTM  accelerates the material's hardening process and decreases its setting time, which in turn shortens clinical chairside procedural timing and thereby improves patient satisfaction.

Fe oxides simultaneously improve stability of Cd and carbon in paddy soil：The underlying influence at aggregate level.

Iron (Fe) oxides have a strong adsorption affinity for Cd and organic carbon (SOC). However, under alternate wet-dry (IF) condition,the influences of Fe oxides on the speciation and disrtribution of Cd and SOC in soil aggregates are unkown. In the present study, soils untreated (S), removed (S-Fe) or added (S+Fe) Fe oxide soils were blended with cadmium chloride solution and cultivated for 56 days under different moisture management practices. Compared with the S-Fe soil, the IF treatment increased the contents of Fe oxide-bound SOC (Fe-OC) and Fe/Mn oxide-bound Cd (Fe/Mn-Cd) by 18.5-29.8-fold and 1.45-2.45-fold, repectively, in the S and S+Fe soils, corresponding to a 36 %-42 % increase in the recalcitrant C pool (RCP) and a 53 %-87 % decrease in the exchangeable Cd content. These results could be attributed to soil particle aggregation and Fe redistribution. Fe addition promoted the transfer of Cd/SOC accumulated in microaggregates to macroaggregates and increased the variable negative charge content in macroaggregates and the adsorption capacity of macroaggregates for Cd/SOC. More Cd/SOC accumulated in macroaggregates in Fe oxide-bound form, which reduced the risk of Cd migration and Cd availability and increased the physical protection of SOC. Therefore, Fe oxide has great potential to simultaneously reduce carbon emissions and cadmium toxicity in paddy soil.

Characterization of structure and mixing in nanoparticle hetero-aggregates using convolutional neural networks: 3D-reconstruction versus 2D-projection.

Structural and chemical characterization of nanomaterials provides important information for understanding their functional properties. Nanomaterials with characteristic structure sizes in the nanometer range can be characterized by scanning transmission electron microscopy (STEM). In conventional STEM, two-dimensional (2D) projection images of the samples are acquired, information about the third dimension is lost. This drawback can be overcome by STEM tomography, where the three-dimensional (3D) structure is reconstructed from a series of projection images acquired using various projection directions. However, 3D measurements are expensive with respect to acquisition and evaluation time. Furthermore, the method is hardly applicable to beam-sensitive materials, i.e. samples that degrade under the electron beam. For this reason, it is desirable to know whether sufficient information on structural and chemical information can be extracted from 2D-projection measurements. In the present work, a comparison between 3D-reconstruction and 2D-projection characterization of structure and mixing in nanoparticle hetero-aggregates is provided. To this end, convolutional neural networks are trained in 2D and 3D to extract particle positions and material types from the simulated or experimental measurement. Results are used to evaluate structure, particle size distributions, hetero-aggregate compositions and mixing of particles quantitatively and to find an answer to the question, whether an expensive 3D characterization is required for this material system for future characterizations.

An eco-friendly solution for construction and demolition waste: Recycled coarse aggregate with CO2 utilization.

Carbonation of recycled coarse aggregate (RCA) is an eco-friendly solution for the recycling of construction and demolition waste. This paper provides a comprehensive understanding of utilizing CO2 in RCA. The carbonation mechanism associated with CO2 treatment of RCA has been systematically summarized. The methods for CO2 treatment of RCA and the calculation of CO2 sequestration were discussed. Meanwhile, the efficiency of physical properties enhancement of carbonized RCA was analyzed. The microstructure, mechanical properties and durability improvement of recycled concrete containing carbonized RCA were reviewed. Additionally, the environmental benefits of carbonized RCA were provided through carbon footprint, carbon accounting and carbon intensity. Furthermore, the future perspectives of RCA with CO2 utilization were prospected.

The effects of mineral trioxide aggregate and second-generation autologous growth factor on pulpotomy via TNF-α and NF-kß/p65 pathways.

This study aims to investigate the effect of Mineral Trioxide Aggregate (MTA), a bioactive endodontic cement, and Concentrated Growth Factor (CGF), a second-generation autologous growth factor, on pulpotomy-induced pulp inflammation. The study utilized the maxillary anterior central teeth of thirty-six young male Sprague Dawley rats. Forty-eight teeth were randomly assigned to two groups (12 rats/group; 24 teeth/group) based on the capping material (MTA or CGF). Subsequently, two subgroups (MTAG and CGFG) were formed per group (12 teeth/group) based on the time following pulpotomy (2-weeks and 4-weeks). The central teeth of the 12 animals assigned to the control group (CG) were not manipulated in any way, both in the 2-week group and in the 4-week group. Tissue samples extracted from rats at the end of the experiment were stained with H&E for histopathological analysis. For immunohistochemical analysis, primary antibodies for TNF-α and NF-kß/65 were incubated. Data obtained from semi-quantitative analysis were assessed for normal distribution using Skewness-Kurtosis values, Q-Q plot, Levene's test, and the Shapiro-Wilk test on statistical software. A P value < 0.05 was considered significant. When compared with the control group, both MTAG and CGFG showed increased edematous and inflammatory areas. In MTAG, edematous and inflammatory areas decreased significantly from the 2nd week (2(2-2), 2(1-2)) to the 4th week (1(1-1), 1(0-1)), while in CGFG, edematous areas decreased (2(2-3), 1.5(1-2)), and inflammatory areas increased significantly (2(2-3), 3(2-2.5)). When compared with the control group, TNF-α and NF-kß/p65 positivity were higher in both MTAG and CGFG. In MTAG, TNF-α [2(1.5-2)] and NF-kß/p65 [1.5(1-2)] positivity decreased significantly from the 2nd week to the 4th week [TNF-α: 1(1-1), NF-kß/p65: 1(1-2)], while no significant change was observed in CGFG. In conclusion, this study revealed a reduction in cells showing TNF-α and NF-kß/p65 positivity in the MTA treatment group compared to the CGF group. Although MTA demonstrated more favorable results than CGF in mitigating pulpal inflammation within the scope of this study, further experimental and clinical investigations are warranted to obtain comprehensive data regarding CGF.

Copper toxicity and deficiency: the vicious cycle at the core of protein aggregation in ALS.

The pathophysiology of ALS involves many signs of a disruption in copper homeostasis, with both excess free levels and functional deficiency likely occurring simultaneously. This is crucial, as many important physiological functions are performed by cuproenzymes. While it is unsurprising that many ALS symptoms are related to signs of copper deficiency, resulting in vascular, antioxidant system and mitochondrial oxidative respiration deficiencies, there are also signs of copper toxicity such as ROS generation and enhanced protein aggregation. We discuss how copper also plays a key role in proteostasis and interacts either directly or indirectly with many of the key aggregate-prone proteins implicated in ALS, such as TDP-43, C9ORF72, SOD1 and FUS as well as the effect of their aggregation on copper homeostasis. We suggest that loss of cuproprotein function is at the core of ALS pathology, a condition that is driven by a combination of unbound copper and ROS that can either initiate and/or accelerate protein aggregation. This could trigger a positive feedback cycle whereby protein aggregates trigger the aggregation of other proteins in a chain reaction that eventually captures elements of the proteostatic mechanisms in place to counteract them. The end result is an abundance of aggregated non-functional cuproproteins and chaperones alongside depleted intracellular copper stores, resulting in a general lack of cuproenzyme function. We then discuss the possible aetiology of ALS and illustrate how strong risk factors including environmental toxins such as BMAA and heavy metals can functionally behave to promote protein aggregation and disturb copper metabolism that likely drives this vicious cycle in sporadic ALS. From this synthesis, we propose restoration of copper balance using copper delivery agents in combination with chaperones/chaperone mimetics, perhaps in conjunction with the neuroprotective amino acid serine, as a promising strategy in the treatment of this incurable disease.

A rapidly progressive multiple system atrophy-cerebellar variant model presenting marked glial reactions with inflammation and spreading of α-synuclein oligomers and phosphorylated α-synuclein aggregates.

Multiple system atrophy (MSA) is a severe α-synucleinopathy facilitated by glial reactions; the cerebellar variant (MSA-C) preferentially involves olivopontocerebellar fibres with conspicuous demyelination. A lack of aggressive models that preferentially involve olivopontocerebellar tracts in adulthood has hindered our understanding of the mechanisms of demyelination and neuroaxonal loss, and thus the development of effective treatments for MSA. We therefore aimed to develop a rapidly progressive mouse model that recaptures MSA-C pathology. We crossed Plp1-tTA and tetO-SNCA*A53T mice to generate Plp1-tTA::tetO-SNCA*A53T bi-transgenic mice, in which human A53T α-synuclein-a mutant protein with enhanced aggregability-was specifically produced in the oligodendrocytes of adult mice using Tet-Off regulation. These bi-transgenic mice expressed mutant α-synuclein from 8 weeks of age, when doxycycline was removed from the diet. All bi-transgenic mice presented rapidly progressive motor deterioration, with wide-based ataxic gait around 22 weeks of age and death around 30 weeks of age. They also had prominent demyelination in the brainstem/cerebellum. Double immunostaining demonstrated that myelin basic protein was markedly decreased in areas in which SM132, an axonal marker, was relatively preserved. Demyelinating lesions exhibited marked ionised calcium-binding adaptor molecule 1-, arginase-1-, and toll-like receptor 2-positive microglial reactivity and glial fibrillary acidic protein-positive astrocytic reactivity. Microarray analysis revealed a strong inflammatory response and cytokine/chemokine production in bi-transgenic mice. Neuronal nuclei-positive neuronal loss and patchy microtubule-associated protein 2-positive dendritic loss became prominent at 30 weeks of age. However, a perceived decrease in tyrosine hydroxylase-positive neurons in the substantia nigra pars compacta in bi-transgenic mice compared with wild-type mice was not significant, even at 30 weeks of age. Wild-type, Plp1-tTA, and tetO-SNCA*A53T mice developed neither motor deficits nor demyelination. In bi-transgenic mice, double immunostaining revealed human α-synuclein accumulation in neurite outgrowth inhibitor A (Nogo-A)-positive oligodendrocytes beginning at 9 weeks of age; its expression was further increased at 10 to 12 weeks, and these increased levels were maintained at 12, 24, and 30 weeks. In an α-synuclein-proximity ligation assay, α-synuclein oligomers first appeared in brainstem oligodendrocytes as early as 9 weeks of age; they then spread to astrocytes, neuropil, and neurons at 12 and 16 weeks of age. α-Synuclein oligomers in the brainstem neuropil were most abundant at 16 weeks of age and decreased thereafter; however, those in Purkinje cells successively increased until 30 weeks of age. Double immunostaining revealed the presence of phosphorylated α-synuclein in Nogo-A-positive oligodendrocytes in the brainstem/cerebellum as early as 9 weeks of age. In quantitative assessments, phosphorylated α-synuclein gradually and successively accumulated at 12, 24, and 30 weeks in bi-transgenic mice. By contrast, no phosphorylated α-synuclein was detected in wild-type, tetO-SNCA*A53T, or Plp1-tTA mice at any age examined. Pronounced demyelination and tubulin polymerisation, promoting protein-positive oligodendrocytic loss, was closely associated with phosphorylated α-synuclein aggregates at 24 and 30 weeks of age. Early inhibition of mutant α-synuclein expression by doxycycline diet at 23 weeks led to fully recovered demyelination; inhibition at 27 weeks led to persistent demyelination with glial reactions, despite resolving phosphorylated α-synuclein aggregates. In conclusion, our bi-transgenic mice exhibited progressively increasing demyelination and neuroaxonal loss in the brainstem/cerebellum, with rapidly progressive motor deterioration in adulthood. These mice showed marked microglial and astrocytic reactions with inflammation that was closely associated with phosphorylated α-synuclein aggregates. These features closely mimic human MSA-C pathology. Notably, our model is the first to suggest that α-synuclein oligomers may spread from oligodendrocytes to neurons in transgenic mice with human α-synuclein expression in oligodendrocytes. This model of MSA is therefore particularly useful for elucidating the in vivo mechanisms of α-synuclein spreading from glia to neurons, and for developing therapies that target glial reactions and/or α-synuclein oligomer spreading and aggregate formation in MSA.

Artificial lightweight aggregate made from alternative and waste raw materials, hardened using the hybrid method.

Lightweight aggregates are a material used in many industries. A huge amount of this material is used in construction and architecture. For the most part, lightweight construction aggregates are obtained from natural resources such as clay raw materials that have the ability to swell at high temperatures. Resources of these clays are limited and not available everywhere. Therefore, opportunities are being sought to produce lightweight artificial aggregates that have interesting performance characteristics due to their properties. For example, special preparation techniques can reduce or increase the water absorption of such an aggregate depending on the needs and application. The production of artificial lightweight aggregate using various types of waste materials is environmentally friendly as it reduces the depletion of natural resources. Therefore, this article proposes a method of obtaining artificial lightweight aggregate consolidated using two methods: drum and dynamic granulation. Hardening was achieved using combined methods: sintering and hydration, trying to maintain the highest possible porosity. Waste materials were used, such as dust from construction rubble and residues from the processing of PET bottles, as well as clay from the Belchatów mine as a raw material accompanying the lignite overburden. High open porosity of the aggregates was achieved, above 30%, low apparent density of 1.23 g/cm3, low leachability of approximately 250 µS. The produced lightweight aggregates could ultimately be used in green roofs.

Miscanthus sp. root exudate alters rhizosphere microbial community to drive soil aggregation for heavy metal immobilization.

The heavy metals (HMs) spatial distribution in soil is intricately shaped by aggregation processes involving chemical reactions and biological activities, which modulate HMs toxicity, migration, and accumulation. Pioneer plants play a central role in preventing HMs at source, yet the precise mechanisms underlying their involvement in soil aggregation remain unclear. This study investigates HMs distribution within rhizosphere and bulk soil aggregates of Miscanthus sp. grown in tailings to elucidate the impact of root exudates (REs) and rhizosphere microbes. The results indicate that Miscanthus sp. enhance soil stability, increasing the proportion of macroaggregates by 4.06 %-9.78 %. HMs tend to concentrate in coarse-aggregates, particularly within rhizosphere environments, while diminishing in fine-aggregates. Under HMs stress, lipids and lipid-like molecules are the most abundant REs produced by Miscanthus sp., accounting for under up to 26.74 %. These REs form complex with HMs, promoting microaggregates formation. Charged components such as sugars and amino acids further contribute to soil aggregation. REs also regulates rhizosphere bacteria and fungi, with Acidobacteriota, Chloroflexi were the dominant bacterial phyla, while Ascomycota and Basidiomycota dominate the fungal community. The synergistic effect of REs and microorganisms impact soil organic matter and nutrient content, facilitating HMs nanoparticle heteroaggregation and macroaggregates formation. Consequently, soil structure and REs shape the distribution of HMs in soil aggregation. Pioneer plants mediate REs interaction with rhizosphere microbes, promoting the distribution of HMs into macroaggregates, leading to immobilization. This study sheds light on the role of pioneer plants in regulating soil HMs, offering valuable insights for soil remediation strategies.

Long-term Application of Agricultural Amendments Regulate Hydroxyl Radicals Production during Oxygenation of Paddy Soils.

Hydroxyl radicals (•OH) play a significant role in contaminant transformation and element cycling during redox fluctuations in paddy soil. However, these important processes might be affected by widely used agricultural amendments, such as urea, pig manure, and biochar, which have rarely been explored, especially regarding their impact on soil aggregates and associated biogeochemical processes. Herein, based on five years of fertilization experiments in the field, we found that agricultural amendments, especially coapplication of fertilizers and biochar, significantly increased soil organic carbon contents and the abundances of iron (Fe)-reducing bacteria. They also substantially altered the fraction of soil aggregates, which consequently enhanced the electron-donating capacity and the formation of active Fe(II) species (i.e., 0.5 M HCl-Fe(II)) in soil aggregates (0-2 mm), especially in small aggregates (0-3 µm). The highest contents of active Fe(II) species in small aggregates were mainly responsible for the highest •OH production (increased by 1.7-2.4-fold) and naphthalene attenuation in paddy soil with coapplication of fertilizers and biochar. Overall, this study offers new insights into the effects of agricultural amendments on regulating •OH formation in paddy soil and proposes feasible strategies for soil remediation in agricultural fields, especially in soils with frequent occurrences of redox fluctuations.

Mesoscale Acid-Base Complexes Display Size-Associated Photophysical Property and Photochemical Activity.

The properties of single molecules and molecular aggregates can differ dramatically, leading to a long-standing interest in mesoscale aggregation processes. Herein, a series of acid-base molecular complexes is developed by using a tetraphenylethylene-backboned fluorophore, and investigated the photophysical properties and photochemical activities at different aggregation length scales. This fluorophore, with two basic diethylamine groups and two acidic tetrazole groups, exhibits sparse solubility due to multivalent interactions that cause infinite aggregation. The addition of a third acid leads to the formation of fluorophore/acid complexes with good dispersibility and colloidal stability. This assembly process can be controlled by the use of different acids and their stoichiometry, resulting in aggregates ranging in size from a few to hundreds of nanometers. A crystalline structure is obtained to illustrate the complex properties of the acid-base network. Unlike the single molecule, these complexes show a trend of size-related properties for photoluminescence efficiency and photochemical activity. As the amount of acid added increases, the size of the complexes decreases, the aggregation effect of the complexes on fluorescence emission increases, and the rates of the oxidative photocyclization and photodecomposition slow down. This work may help to understand size-controlled molecular materials at the mesoscale for functional design.

Experimental Study on the Effects of Carbonated Steel Slag Fine Aggregate on the Expansion Rate, Mechanical Properties and Carbonation Depth of Mortar.

Steel slag is the main by-product of the steel industry and can be used to produce steel slag fine aggregate (SSFA). SSFA can be used as a fine aggregate in mortar or concrete. However, SSFA contains f-CaO, which is the main reason for the expansion damage of mortar and concrete. In this study, the carbonation treatment of SSFA was adopted to reduce the f-CaO content; the influence of the carbonation time on the content of f-CaO in the SSFA was studied; and the effects of the carbonated SSFA replacement ratio on the expansion rate, mechanical properties and carbonation depth of mortar were investigated through tests. The results showed that as the carbonation time increased, the content of f-CaO in the SSFA gradually decreased. Compared to the mortar specimens with carbonated SSFA, the specimens with uncarbonated SSFA showed faster and more severe damage and a higher expansion rate. When the replacement ratio of carbonated SSFA was less than 45%, the carbonated SSFA had an inhibitory effect on the expansion development of the specimens. The compressive strengths of the specimens with a carbonated SSFA replacement ratio of 60% and 45% were 1.29% and 6.81% higher than those of the specimens with an uncarbonated SSFA replacement ratio of 60% and 45%, respectively. Carbonation treatment could improve the replacement ratio of SSFA while ensuring the compressive strength of specimens. Compared with mortar specimens with uncarbonated SSFA, the anti-carbonation performance of mortar specimens with carbonated SSFA was reduced.

Eco-Friendly 3D-Printed Concrete Made with Waste and Organic Artificial Aggregates.

In this research, the results of an experimental study on the use of three alternative components for creating artificial aggregates (AAs) (granules) and their usage in 3D-printed concrete (3DPC) are examined. This study combines AAs made from organic components like hemp shives (HSs), pyrolyzed coal (charcoal), waste/municipal solid waste incinerator bottom slag (BS), and a mix of a reference 3DPC with the aforementioned AAs. Particularly, to enhance these properties to make low-carbon 3DPC, in this research, the potential of using AAs as lightweight aggregates was increased to 14% in terms of the mass of the concrete. Each mix was tested in terms of its printability via a preliminary test in a 3D printing laboratory. For an additional comparison with the aforementioned cases, 3DPC was mixed with unprocessed hemp shives, charcoal, and BS. Furthermore, their strength was measured at 28 days, and lastly, their durability parameters and shrinkage were experimentally investigated. Cross-sections of the fragments were studied under a scanning electron microscope. In this study, we achieved improvements in the mechanical properties of AAs for their development and implementation as an innovative way to reduce carbon in 3DPC.

Long-Term Evaluation of Pulp Vitality Preservation in Direct and Indirect Pulp Capping: A Retrospective Clinical Study.

Background: This retrospective clinical study aimed to assess dental pulp tissue reactions to direct and indirect pulp capping after 10 years of follow-up. Methods: A total of 276 permanent teeth with deep carious lesions were evaluated and divided into five groups: Group (1), direct pulp capping with Mineral Trioxide Aggregate cement; Group (2), direct pulp capping with a resin-based glass ionomer; Group (3), direct pulp capping with TheraCal; Group (4), indirect pulp capping with a three-step total-etch adhesive system; and Group (5), indirect pulp capping with a two-step self-etch adhesive system. Results: A 72.5% success rate was achieved overall. A statistically significant difference was found when comparing direct and indirect pulp capping with a success rate of 23.8% and 93.8%, respectively. For direct pulp-capping procedures, the area of pulp exposure was correlated with pulp necrosis (p = 0.035), while bleeding after exposure appeared independent (p = 0.053). Patient age was significantly related to the maintenance of pulp vitality (p = 0.013). A statistically significant correlation between the pulp-capping material and the occurrence of pulp necrosis was discovered (p = 0.017). For the indirect pulp-capping treatments, a significant correlation between patient age (p = 0.021) and the adhesive system (p = 0.019) with pulp necrosis was described. Conclusions: The pulp-capping material, patient age, and the width of the pulp exposure before the procedure should be carefully considered when performing direct pulp-capping treatments. The performance of the etch-and-rinse adhesive systems was superior to the self-etch system during the indirect pulp-capping procedures.

Designing NIR AIEgens for lysosomes targeting and efficient photodynamic therapy of tumors.

Cancer is the most severe health problem facing most people today. Photodynamic therapy (PDT) for tumors has attracted attention because of its non-invasive nature, negligible adverse reactions, and high spatiotemporal selectivity. Developing biocompatible photosensitizers that can target, guide, and efficiently kill cancer cells is desirable in PDT. Here, two amphiphilic organic compounds, PS-I and PSS-II, were synthesized based on the D-π-A structure with a positive charge. The two AIEgens exhibited near-infrared emission, large Stokes shift, high 1O2 and O2-∙ generation efficiency, good biocompatibility, and photostability. They were co-incubated with cancer cells and eventually accumulated to lysosomes by cell imaging experiments. In vitro and in vivo experiments demonstrated that PS-I and PSS-II could effectively kill cancer cells and sufficiently inhibit tumor growth under light irradiation. PS-I had a higher fluorescence quantum yield in the aggregated state, which made it better for bio-imaging in imaging-guided photodynamic therapy. In contrast, PSS-II with a longer conjugated structure had more ROS generation to kill tumor cells under illumination, and the tumor growth inhibition of mice reached 71.95% during the treatment. No observable injury or undesirable outcomes were detected in the vital organs of the mice within the treatment group, suggesting that PSS-II/PS-I had a promising future in efficient imaging-guided PDT for cancer.

Characterization of washing aggregate sludge waste as a novel supplementary cementitious material: Experimental study and life cycle assessment.

Washing aggregate sludge (WAS), a waste collected from aggregate quarries, is examined for its application as a partial substitute of ordinary portland cement (OPC). The raw WAS initially dried, ground, and then subjected to 700 °C and 900 °C. In this study, various paste and mortar mixtures were produced to investigate the pozzolanic property and environmental impacts of raw WAS and treated WAS at a selected temperature of 700 °C. The pozzolanic activity of both raw and treated WAS at 700 °C was verified using several tests, including X-ray diffraction (XRD), Frattini test, strength-based evaluation, and thermal analysis. The calcium-silicate-hydrate (C-S-H), portlandite (Ca(OH)2), calcium silicates (C2S and C3S), and calcite (CaCO3) were identified as major reaction products indicating the participation of raw or treated WAS. While the reduced [CaO] concentration and location below the solubility curve confirmed the pozzolanic activity of both powders, the compressive strengths of blended mortars were also found greater than 75% compared to the reference mortar at all testing ages. Treated WAS demonstrated higher pozzolanic activity than raw WAS due to the reduced formation of Ca(OH)2 revealed by thermal and kinetic analysis at different time periods. Life cycle assessment resulted in the reduced CO2 emissions by the blended mortars containing either raw or treated WAS, which suggest their promising mechanical and environmental benefits.

METAZOAN PARASITE COMMUNITY OF THE YELLOW SNAPPER LUTJANUS ARGENTIVENTRIS: FACTORS THAT INFLUENCING SPECIES COMPOSITION AND RICHNESS.

A total of 366 individuals of Lutjanus argentiventris (Peters, 1869) were collected over a 5-yr period (October 2018 to June 2022) from Acapulco Bay, Mexico. Parasite communities in Lutjanus argentiventris were quantified and analyzed to determine the main factors that generate changes in species richness and/or species composition over time. The digeneans and copepods were the best-represented parasite groups. The parasite communities were characterized by a high numerical dominance of ectoparasites, mainly isopod larvae. Species richness at the component community level (9-23 species) was similar to the reported richness in other Lutjanus spp. The parasite communities of Lutjanus argentiventris exhibited high variability in species composition, suggesting that each parasite species may respond differently to environmental changes. However, the species richness and diversity were fairly stable over time; therefore, a clear pattern of interannual variation was not observed. Variations in the community structure probably were due to factors such as host traits (e.g., feeding behavior and body size), and possible interannual differences in environmental factors amplified by the occurrence of the anomalous event of La Niña.