Scalable Asymmetric Fabric Evaporator for Solar Desalination and Thermoelectricity Generation.

The integration of solar interfacial evaporation and power generation offers a sustainable solution to address water and electricity scarcity. Although water-power cogeneration schemes are proposed, the existing schemes lack scalability, flexibility, convenience, and stability. These limitations severely limit their future industrial applications. In this study, we prepared a hybrid fabric composed of basalt fibers and cotton yarns with asymmetric structure using textile weaving technology. The cotton yarn in lower layer of fabric facilitates water transport, while the basalt fibers in upper layer enable thermal localization and water supply balancing. The carbon black is deposited on top layer by flame burning to facilitate photothermal conversion. The fabric exhibits a high evaporation rate of 1.52 kg m-2 h-1, which is 3.6 times that of pure water, and an efficiency of 88.06% under 1 kW m-2 light intensity. After assembly with a thermoelectric module, the hybrid system achieves a maximum output power density of 66.73 mW m-2. By exploiting the scalability of fabric, large-scale desalination and power production can be achieved in outdoor environments. This study demonstrates the seamless integration of fabric-based solar evaporation and waste heat-to-energy technologies, thereby providing new avenues for the development of scalable and stable water-power cogeneration systems.

Mitigation effects of plant carbon black on intestinal morphology, inflammation, antioxidant status, and microbiota in piglets challenged with deoxynivalenol.

Introduction: Plant carbon black (PCB) is a new feed additive for zearalenone adsorption in China. However, information regarding whether PCB can effectively absorb deoxynivalenol (DON) is limited. Methods: To explore this research gap, the present study examined the adsorption effectiveness of DON by PCB using a phosphate buffer, artificial gastric juice, and artificial intestinal juice. In a 21-day in vivo trial, 48 male piglets were randomly assigned to four treatment groups: (1) uncontaminated basal diet (CTR), (2) basal diet supplemented with 1 mg/kg PCB(PCB), (3) 2.3 mg/kg DON-contaminated diet (DON), and (4) 2.3 mg/kg DON-contaminated diet supplemented with 0.1% PCB (DON+PCB). Results: When DON concentration was 1 µg/mL, the adsorption rate of PCB on DON in phosphate buffer systems (pH 2.0 and 6.0) and the artificial gastric and intestinal juices were 100%, 100%, 71.46%, and 77.20%, respectively. In the in vivo trial, the DON group significantly increased the DON+deepoxy-deoxynivalenol (DOM-1) content in serum as well as the inflammation cytokine proteins (interleukin-6, interleukin-8, and tumor necrosis factor-α) and mRNA expression of interleukin-6 and longchain acyl-CoA synthetase 4 in the jejunum and ileum. It decreased the villus height, goblet cells, mucosal thickness, and mRNA expression of Claudin-1 compared to the CTR group. In addition, DON decreased the Shannon and Simpson indices; reduced the relative abundances of Firmicutes, Lactobacillus, Candidatus_Saccharimonas, and Ruminococcus; and increased the relative abundances of Terrisporobacter and Clostridium_sensu_stricto_1 in the cecal content. Discussion: In conclusion, these results suggest that PCB showed high adsorption efficacy on DON in vitro, and exhibit the protective effects against various intestinal toxicity manifestations in DON-challenged piglets.

A New Paradigm on Waste-to-Energy Applying Hydrovoltaic Energy Harvesting Technology to Face Masks.

The widespread use of single-use face masks during the recent epidemic has led to significant environmental challenges due to waste pollution. This study explores an innovative approach to address this issue by repurposing discarded face masks for hydrovoltaic energy harvesting. By coating the face masks with carbon black (CB) to enhance their hydrophilic properties, we developed mask-based hydrovoltaic power generators (MHPGs). These MHPGs were evaluated for their hydrovoltaic performance, revealing that different mask configurations and sizes affect their efficiency. The study found that MHPGs with smaller, more structured areas exhibited better energy output, with maximum open-circuit voltages (VOC) reaching up to 0.39 V and short-circuit currents (ISC) up to 65.6 µA. The integration of CB improved water absorption and transport, enhancing the hydrovoltaic performance. More specifically, MHPG-1 to MHPG-4, which represented different sizes and features, presented mean VOC values of 0.32, 0.17, 0.19 and 0.05 V, as well as mean ISC values of 16.57, 15.59, 47.43 and 3.02 µA, respectively. The findings highlight the feasibility of utilizing discarded masks in energy harvesting systems, offering both environmental benefits and a novel method for renewable energy generation. Therefore, this work provides a new paradigm for waste-to-energy (WTE) technologies and inspires further research into the use of unconventional waste materials for energy production.

Circ_0025373 inhibits carbon black nanoparticles-induced malignant transformation of human bronchial epithelial cells by affecting DNA damage through binding to MSH2.

Carbon black nanoparticles (CBNPs) have been demonstrated to induce DNA damage in epithelial cells. However, the potential of the damage to initiate carcinogenesis and the underlying mechanism remain poorly understood. Therefore, we constructed an in vitro model of malignant transformation of human bronchial epithelial cells (16HBE-T) by treating 40 µg/mL CBNPs for 120 passages. We observed tumor-like transformation and sustained DNA damage. Using transcriptome sequencing and RIP-seq, we identified the overexpression of the critical DNA mismatch repair genes MutS homolog 2 (MSH2) and its related circular RNA, circ_0025373, in the 16HBE-T cells. Mechanistically, circ_0025373 was found to inhibit DNA damage by binding to MSH2, thereby modifying its expression and influencing its nuclear and cytoplasmic distribution, which lead to inhibition of CBNP-induced malignant transformation of human bronchial epithelial cells. Our findings provide novel evidence on the carcinogenicity of CBNPs, and offer biological insights into the potential epigenetic regulation and potential therapeutic targets for lung carcinogenesis.

Synthesis of Solketal Catalyzed by Acid-Modified Pyrolytic Carbon Black from Waste Tires.

Solketal, a widely used glycerol-derived solvent, can be efficiently synthesized through heterogeneous catalysis, thus avoiding the significant product losses typically encountered with aqueous work-up in homogeneous catalysis. This study explores the catalytic synthesis of solketal using solid acid catalysts derived from recovered carbon blacks (rCBs), which are obtained through the pyrolysis of end-of-life tires. This was further converted into solid acid catalysts through the introduction of acidic functional groups using concentrated H2SO4 or 4-benzenediazonium sulfonate (BDS) as sulfonating agents. Additionally, post-pyrolytic rCB treated with glucose and subsequently sulfonated with sulfuric acid was also prepared. Comprehensive characterization of the initial and modified rCBs was performed using techniques such as elemental analysis, powder X-ray diffraction, thermogravimetric analysis, a back titration method, and both scanning and transmission electron microscopy, along with X-ray photoelectron spectroscopy. The catalytic performance of these samples was evaluated through the batch mode glycerol acetalization to produce solketal. The modified rCBs exhibited substantial catalytic activity, achieving high glycerol conversions (approximately 90%) and high solketal selectivity (around 95%) within 30 min at 40 °C. This notable activity was attributed to the presence of -SO3H groups on the surface of the functionalized rCBs. Reusability tests indicated that only rCBs modified with glucose demonstrated acceptable catalytic stability in subsequent acetalization cycles. The findings underscore the potential of utilizing end-of-life tires to produce effective acid catalysts for glycerol valorization processes.

Rational construction of dicarbonous CB/CNT@PI composites toward low filler loading and low-frequency electromagnetic wave absorption.

With the application of low frequency radar and the demand for stealth of high temperature resistant components, it is increasingly urgent to develop absorbing materials with both low frequency and high temperature resistant properties. Here, we successfully prepared various carbon/polyimide composites as low-frequency electromagnetic wave (EMW) absorbing materials by simple blending method. The well-designed mesh lap structure introduces a large amount of free space, further optimizing the impedance matching of the material. At the same time, the multiple loss mechanism formed by the combination of carbon black dominated polarization and carbon nanotube dominated conductive loss enhances the loss of incident EMW. The results showed that only 10 wt% filler loading of the CB/CNT@PI is achieved in the low frequency range (1-4 GHz) with a minimum reflection loss strength of -18.3 dB, which has obvious advantages compared with other works in recent years. This study provides a way for the design and preparation of resin-based absorbing materials.

Quantifying electron transport in aggregated colloidal suspensions in the strong flow regime.

Electron transport in complex fluids, biology, and soft matter is a valuable characteristic in processes ranging from redox reactions to electrochemical energy storage. These processes often employ conductor-insulator composites in which electron transport properties are fundamentally linked to the microstructure and dynamics of the conductive phase. While microstructure and dynamics are well recognized as key determinants of the electrical properties, a unified description of their effect has yet to be determined, especially under flowing conditions. In this work, the conductivity and shear viscosity are measured for conductive colloidal suspensions to build a unified description by exploiting both recent quantification of the effect of flow-induced dynamics on electron transport and well-established relationships between electrical properties, microstructure, and flow. These model suspensions consist of conductive carbon black (CB) particles dispersed in fluids of varying viscosities and dielectric constants. In a stable, well-characterized shear rate regime where all suspensions undergo self-similar agglomerate breakup, competing relationships between conductivity and shear rate were observed. To account for the role of variable agglomerate size, equivalent microstructural states were identified using a dimensionless fluid Mason number, [Formula: see text], which allowed for isolation of the role of dynamics on the flow-induced electron transport rate. At equivalent microstructural states, shear-enhanced particle-particle collisions are found to dominate the electron transport rate. This work rationalizes seemingly contradictory experimental observations in literature concerning the shear-dependent electrical properties of CB suspensions and can be extended to other flowing composite systems.

Electrofluids with Tailored Rheoelectrical Properties: Liquid Composites with Tunable Network Structures as Stretchable Conductors.

Flexible and stretchable electronics require both sensing elements and stretching-insensitive electrical connections. Conductive polymer composites and liquid metals are highly deformable but change their conductivity upon elongation and/or contain rare metals. Solid conductive composites are limited in mechanoelectrical properties and are often combined with macroscopic Kirigami structures, but their use is limited by geometrical restraints. Here, we introduce "Electrofluids", concentrated conductive particle suspensions with transient particle contacts that flow under shear that bridge the gap between classic solid composites and liquid metals. We show how Carbon Black (CB) forms large agglomerates when using incompatible solvents that reduce the electrical percolation threshold by 1 order of magnitude compared to more compatible solvents, where CB is well-dispersed. We analyze the correlation between stiffness and electrical conductivity to create a figure of merit of first electrofluids. Sealed elastomeric tubes containing different types of electrofluids were characterized under uniaxial tensile strain, and their electrical resistance was monitored. We found a dependency of the piezoresistivity with the solvent compatibility. Electrofluids enable the rational design of sustainable soft electronics components by simple solvent choice and can be used both as sensor and electrode materials, as we demonstrate.

Enhanced TiO2-Based Photocatalytic Volatile Organic Compound Decomposition Combined with Ultrasonic Atomization in the Co-Presence of Carbon Black and Heavy Metal Nanoparticles.

Volatile organic compounds (VOCs) are representative indoor air pollutants that negatively affect the human body owing to their toxicity. One of the most promising methods for VOC removal is photocatalytic degradation using TiO2. In this study, the addition of carbon black (CB) and heavy metal nanoparticles (NPs) was investigated to improve the efficiency of a TiO2-based photocatalytic VOC decomposition system combined with ultrasonic atomization and ultraviolet irradiation, as described previously. The addition of CB and Ag NPs significantly improved the degradation efficiency. A comparison with other heavy metal nanoparticles and their respective roles are discussed.

Surfactant-Driven Dynamic Changes in Rheology of Activated Carbon Slurry Electrodes.

Carbon black slurry electrodes are an effective means to improve flow battery performance by increasing the active surface area necessary for electrochemical reactions with a cost-effective material. Current challenges with this specific flow battery chemistry include the stability and flowability of the carbon black suspensions, especially in response to formulation choices. Advancing the manufacturing, operation, and performance of these redox flow batteries requires a deeper understanding of how slurry formulation impacts its rheological profile and ultimately battery performance. In response to this need, the linear and nonlinear rheological responses of activated carbon (AC) based slurry electrode materials used in an all-iron flow battery in the presence of a nonionic surfactant (Triton X-100) were measured. Results from these measurements show the slurry is a colloidal gel with elasticity remaining constant despite increasing surfactant concentration until α (= Csurf/CAC) < 0.65. However, at α ≥ 0.65, the slurry abruptly transitions to a fluid with no measurable yield stress. This critical surfactant concentration at which the rheological profile undergoes a dynamic change matches the concentration found previously for gel collapse of this system. Moreover, this transition is accompanied by a complete loss of electrical conductivity. From these data we conclude the site specific adsorption of surfactant molecules often used in slurry formulation has a significant and dramatic impact on the stability and flowability of these suspensions. Work presented herein demonstrates the importance of additive choices when formulating a slurry electrode.

Optimized Design of Material Preparation for Cotton Linters-Based Carbon Black Dispersion Stabilizers Based on Response Surface Methodology.

Carbon black particles possess dimensions on the nanometer or sub-nanometer scale. When utilized, these particles have a tendency to aggregate, which compromises their stability under storage conditions. To address this issue, a dispersant was prepared using cotton short fibers as raw materials through etherification and graft polymerization with acrylamide (AM) and 2-acrylamido-2-methylpropane sulfonic acid (AMPS) as raw materials. The dispersant was then used to disperse carbon black to test its dispersing performance. A response surface optimization test was utilized to ascertain the influence of AMPS monomer mass, AM monomer mass, and potassium persulfate (KPS) initiator mass on the dispersibility of carbon black during dispersant preparation, and a set of optimal preparation conditions were obtained. The dispersion stability of carbon black in water was assessed using Fourier transform infrared spectroscopy (FTIR), X-ray diffraction (XRD), elemental analysis (EA), thermogravimetric analysis (TG), zeta potential analysis, high magnification scanning electron microscopy (SEM), and contact angle measurements. Results revealed that the optimum mass ratio of carboxymethyl cellulose (CMC) to AMPS to AM was 1:0.69:1.67, with the KPS initiator comprising 1.56% of the total monomer mass. By incorporating the dispersant at a concentration of 37.50%, the particle size of carbon black particles was observed to decrease from 5.350 µm to 0.255 µm, and no agglomeration of carbon black particles occurred even after 3 weeks of storage.

Effect of Additives on Thermal Degradation and Crack Propagation Properties of Recycled Polyethylene Blends.

Additives, such as antioxidants (AOs), carbon black (CB) and compatibilizers (COs), are used in recycled polymer blends for different reasons. AOs slow thermal degradation, CB gives blends a black color and protect them against ultraviolet (UV) light, and compatibilizers improve compatibility between the different phases of the mixture and consequently enhance the mechanical properties of the final blend. In this paper, the three additives were added to recycled polyethylene (PE) blends to study their effect on the final properties and to determine the best formulations that help improve the mechanical properties of recycled PE blends. Stress Crack Resistance (SCR) was accessed by performing Notched Crack Ligament Stress (NCLS) and Un-notched Crack Ligament Stress (UCLS). On the other hand, Oxidative Induction Time (OIT) was used to determine the oxidation time of the blends and the effect of each additive on this property. Based on the results of this study, it was proven that adding carbon black and antioxidants delay the thermal degradation of recycled PE blends and consequently improve the OIT. Otherwise, resistance to stress cracking is improved only by adding a compatibilizer to the reference blend.

Development of Carbon Black Coating on TPU Elastic Powder for Selective Laser Sintering.

Increased usage of selective laser sintering (SLS) for the production of end-use functional components has generated a requirement of developing new materials and process improvements to improve the applicability of this technique. This article discusses a novel process wherein carbon black was applied to the surface of TPU powder to reduce the laser reflectivity during the SLS process. The printing was carried out with a preheating temperature of 75 °C, laser energy density of 0.028 J/mm2, incorporating a 0.4 wt % addition of carbon black to the TPU powder, and controlling the powder layer thickness at 125 µm. The mixed powder, after printing, shows a reflectivity of 13.81%, accompanied by the highest average density of 1.09 g/cm3, hardness of 78 A, tensile strength of 7.9 MPa, and elongation at break was 364.9%. Compared to commercial TPU powder, which lacks the carbon black coating, the reflectance decreased by 1.78%, mechanical properties improved by 33.9%, and there was a notable reduction in the porosity of the sintered product.

Research on carbon black and cerium co-doped Ti4O7-CB-Ce electrocatalytic oxidation of tetracycline-based antibiotics.

Elemental doping is a promising way for enhancing the electrocatalytic activity of metal oxides. Herein, we fabricate Ti/ Ti4O7-CB-Ce anode materials by the modification means of carbon black and cerium co-doped Ti4O7, and this shift effectively improves the interfacial charge transfer rate of Ti4O7 and •OH yield in the electrocatalytic process. Remarkably, the Ti4O7-CB-Ce anode exhibits excellent efficiency of minocycline (MNC) wastewater treatment (100% removal within 20 min), and the removal rate reduces from 100 to 98.5% after five cycles, which is comparable to BDD electrode. •OH and 1O2 are identified as the active species in the reaction. Meanwhile, it is discovered that Ti/ Ti4O7-CB-Ce anodes can effectively improve the biochemical properties of the non-biodegradable pharmaceutical wastewater (B/C values from 0.25 to 0.44) and significantly reduce the toxicity of the wastewater (luminescent bacteria inhibition rate from 100 to 26.6%). This work paves an effective strategy for designing superior metal oxides electrocatalysts.

Exploring the Impact of Reinforcing Filler Systems on Devulcanizate Composites.

Composites revolutionize material performance, fostering innovation and efficiency in diverse sectors. Elastomer-based polymeric composites are crucial for applications requiring superior mechanical strength and durability. Widely applied in automotives, aerospace, construction, and consumer goods, they excel under extreme conditions. Composites based on recycled rubber, fortified with reinforcing fillers, represent a sustainable material innovation by repurposing discarded rubber. The integration of reinforcing agents enhances the strength and resilience of this composite, and the recycled polymeric matrix offers an eco-friendly alternative to virgin elastomers, reducing their environmental impact. Devulcanized rubber, with inherently lower mechanical properties than virgin rubber, requires enhancement of its quality for reuse in a circular economy: considerable amounts of recycled tire rubber can only be applied in new tires if the property profile comes close to the one of the virgin rubber. To achieve this, model passenger car tire and whole tire rubber granulates were transformed into elastomeric composites through optimized devulcanization and blending with additional fillers like carbon black and silica-silane. These fillers were chosen as they are commonly used in tire compounding, but they lose their reactivity during their service life and the devulcanization process. Incorporation of 20% (w/w) additional filler enhanced the strength of the devulcanizate composites by up to 15%. Additionally, increased silane concentration significantly further improved the tensile strength, Payne effect, and dispersion by enhancing the polymer-filler interaction through improved silanization. Higher silane concentrations reduced elongation at break and increased crosslink density, as it leads to a stable filler-polymer network. The optimal concentration of a silica-silane filler system for a devulcanizate was found to be 20% silica with 3% silane, showing the best property profile.

Recycling Functional Fillers from Waste Tires for Tailored Polystyrene Composites: Mechanical, Fire Retarding, Electromagnetic Field Shielding, and Acoustic Insulation Properties-A Short Review.

Polymer waste is currently a big and challenging issue throughout the world. Waste tires represent an important source of polymer waste. Therefore, it is highly desirable to recycle functional fillers from waste tires to develop composite materials for advanced applications. The primary theme of this review involves an overview of developing polystyrene (PS) composites using materials from recycled tires as fillers; waste tire recycling in terms of ground tire rubbers, carbon black, and textile fibers; surface treatments of the fillers to optimize various composite properties; and the mechanical, fire retarding, acoustic, and electromagnetic field (EMI) shielding performances of PS composite materials. The development of composite materials from polystyrene and recycled waste tires provides a novel avenue to achieve reductions in carbon emission goals and closed-loop plastic recycling, which is of significance in the development of circular economics and an environmentally friendly society.

Flash Pyrolysis of Waste Tires in an Entrained Flow Reactor-An Experimental Study.

In this study, a flash pyrolysis process is developed using an entrained flow reactor for recycling of waste tires. The flash pyrolysis system is tested for process stability and reproducibility of the products under similar operating conditions when operated continuously. The study is performed with two different feedstock materials, i.e., passenger car (PCT) and truck tire (TT) granulates, to understand the influence of feedstock on the yield and properties of the pyrolysis products. The different pyrolytic products i.e., pyrolytic carbon black (pCB), oil, and pyro-gas, are analyzed, and their key properties are discussed. The potential applications for the obtained pyrolytic products are discussed. Finally, a mass and energy balance analysis has been performed for the developed pyrolysis process. The study provides insight into the governing mechanisms of the flash pyrolysis process for waste tires, which is useful to optimize the process depending on the desired applications for the pyrolysis products, and also to scale up the pyrolysis process.

Enhancement of the Electric-Force Response of Carbon Black/Silicone Rubber Composites by Silane Coupling Agents.

Flexible strain sensors have a wide range of applications in the field of health monitoring of seismic isolation bearings. However, the nonmonotonic response with shoulder peaks limits their application in practical engineering. Here we eliminate the shoulder peak phenomenon during the resistive-strain response by adjusting the dispersion of conductive nanofillers. In this paper, carbon black (CB)/methyl vinyl silicone rubber (VMQ) composites were modified by adding a silane coupling agent (KH550). The results show that the addition of KH550 eliminates the shoulder peak phenomenon in the resistive response signal of the composites. The reason for the disappearance of the shoulder peak phenomenon was explained, and at the same time, the mechanical properties of the composites were enhanced, the percolation threshold was reduced, and they had excellent strain-sensing properties. It also exhibited excellent stability and repeatability during 18,000 cycles of loading-unloading. The resistance-strain response mechanism was explained by the tunneling effect theoretical model analysis. It was shown that the sensor has a promising application in the health monitoring of seismic isolation bearings.

Dual-functional natural rubber latex foam composites for solar-driven clean water production and heavy metal decontamination.

Solar steam generation (SSG) offers a sustainable approach to fresh water production. Herein, a novel dual-functional natural rubber/carbon black composite foam evaporator is presented for a cost-efficient SSG system that both produces fresh water and eliminates heavy metals present in the water. The composite foam is produced using the Dunlop process, and in its optimized form, it absorbed >96 % of sunlight. The foam evaporator exhibited a thermal conductivity of 0.052 W/m⋅K, a water evaporation rate of 1.40 kg/m2/h, converted 83.38 % of light to heat under 1 sun irradiation, and showed outstanding stability. The technology required to produce this composite foam is already available to make large-scale production feasible, while the natural raw materials are abundant. On the basis of its performance qualities, the rubber foam composite appears to be an excellent candidate for application as a viable solar absorber for SSG to produce fresh, clean water for commercial purposes.

A smartphone-based sensor for detection of iron and potassium in food and beverage samples.

A novel approach for simultaneous detection of iron and potassium via a smartphone-based potentiometric method is proposed in this study. The screen printed electrodes were modified with carbon black nanomaterial and ion selective membrane including zinc (II) phtalocyanine as the ionophore. The developed Fe3+-selective electrode and K+-selective electrode exhibited detection limits of 1.0 × 10-6 M and 1.0 × 10-5 M for Fe3+ and K+ ions, respectively. The electrodes were used to simultaneously detect Fe3+ and K+ ions in apple juice, skim milk, soybean and coconut water samples with recovery values between 90%-100.5%, and validated against inductively coupled plasma-optical emission spectrometry. Due to the advantageous characteristics of the sensors and the portability of Near Field Communication potentiometer supported with a smartphone application, the proposed method offers sensitive and selective detection of iron and potassium ions in food and beverage samples at the point of need.