Impact of Nitrogen-Enriched 1T/2H-MoS2/CdS as an Electrode Material for Hybrid Supercapacitor.

Transition metal chalcogenides (TMX) have attracted energy researchers due to their role as high-performance electrode materials for energy storage devices. A facile one-pot hydrothermal technique was adopted to synthesize a molybdenum disulfide/cadmium sulfide (MoS2/CdS) (MCS) composite. The as-prepared samples were subjected to characterization techniques such as XRD, FT-IR, SEM, TEM, and XPS to assess their structure, morphology, and oxidation states. The MoS2/CdS (MCS) composites were prepared in three different ratios of molybdenum and cadmium metals. Among them, the MCS 1:2 (Mo:Cd) ratio showed better electrochemical performance with a high specific capacitance of 1336 F g-1 (high specific capacity of 185.83 mAh g-1) at a specific current of 1 A g-1 for half-cell studies. Later, a hybrid supercapacitor (HSC) device was fabricated with N-doped graphene (NG) as an anode and MCS (1:2) as a cathode, delivering a high specific energy of 34 Wh kg-1 and a specific power of 7500 W kg-1. The high nitrogen content in the MoS2 structure in MCS composites alters the device's performance, where CdS supports the composite structure through its conductivity and encourages the easy accessibility of ions. The device withstands up to 10 000 cycles with a higher Coulombic efficiency of 97% and a capacitance retention of 90.25%. The high-performance NG//MCS (1:2) HSC may be a potential candidate alternative to the existing conventional material.

First-principles study of the structure, electronic and optical properties of monolayer ZrX3 (X = S, Se, Te).

CONTEXT AND RESULTS: The structure, electronic and optical properties of single-layer transition metallic chalcogenides ZrX3 (X = S, Se, Te) have been studied by density functional theory. The electron energy dispersion curve shows that ZrX3 has semiconductor properties, in which the conduction band is mainly contributed by the correlated states of the Zr-d orbital, and the valence band is mainly contributed by the correlated states of the X-p orbital. It is found that b-axis and biaxial strain have great influence on the bandgap and the shift of density of states is also large. At the same time, the peak value of density of states increases greatly when biaxial strain is applied. It is of guiding significance for selecting suitable substrates to prepare two-dimensional ZrX3 materials to study their electronic properties. The calculation of optical constants confirms that ZrX3 has strong optical anisotropy. In the visible range, the light absorption efficiency of ZrX3 in the direction of electric field polarization [100] is higher than that in the direction of [010]. The reflectance spectral results show that ZrS3 and ZrSe3 in the [100] directions have the highest reflectance, and ZrTe3 in the [010] direction has the highest reflectance, even in the long electromagnetic radiation range (up to 10 eV), which is of great significance for the construction of visible optical devices. COMPUTATIONAL METHOD: All computations have been carried out based on density functional theory (DFT) as implemented in the CASTEP code. The pseudo-potential is adopted by the norm conserving, and the exchange correlation functional is adopted by the Perdew-Burke-Ernzerhof in local generalized gradient approximation (GGA).

LOW-TEMPERATURE SYNTHESIS OF GeTe NANOPARTICLES.

Nanoparticles can offer an alternative approach to fabricate phase-change materials. The chemical synthesis of GeTe nanoparticles using organometallic precursors exploits high-boiling solvents and relatively high temperatures (close or even above crystallization temperatures), as reported in the available literature. The aim of this work is the preparation of GeTe nanoparticles by a low-temperature synthetic method exploiting new organometallic precursors and common organic solvents. Indeed, different preparation methods and characterization of GeTe nanoparticles is discussed. The characterization of the prepared nanomaterial was performed on the basis of X-ray diffraction, transmission electron microscopy, scanning electron microscopy with energy dispersive X-ray spectroscopy, laser ablation time-of-flight mass spectrometry, Raman scattering spectroscopy, and dynamic light scattering. The results show that the low-temperature synthetic route leads to amorphous GeTe nanoparticles. Exploited organometallic precursor is stabilised by neutral ligand which can be isolated after the reaction and repeatedly used for further reactions. Furthermore, GeTe nanoparticle size can be tuned by the conditions of the synthesis.

Two-Dimensional M-Chalcogene Family with Tunable Superconducting, Topological, and Magnetic Properties.

An interesting question is whether chalcogen atoms can emulate the role of carbon or boron elements stabilized between two transition metal layers, as observed in MXenes or MBenes. Here, we predict a new family of two-dimensional ternary compounds M4XY2 (where M = Pd, Y, Zr, etc.; X = S, Se, Te; and Y = Cl, Br, I), named M-chalcogene. Through first-principles calculations, we reveal diverse physical properties in these compounds, including superconducting, topological, and magnetic characteristics, where the bilayer transition metals play crucial roles. Moreover, the expected helical edge states and superconducting transition temperatures in Pd4SCl2 can be finely tuned by strains. Additionally, the Ti4SCl2 is predicted to be a topological insulator and shows promise as a gas sensor candidate for certain exotic gases. Our findings expand two-dimensional material families and provide promising platforms for diverse physical phenomena with efficient tunability by external stimuli for various applications.

Synthesis and Superficial Modification "In Situ" of Copper Selenide (Cu2-x Se) Nanoparticles and Their Antibacterial Activity.

Copper selenide nanoparticles (Cu2-x Se NPs) have received a lot of attention in recent decades due to their interesting properties and potential applications in various areas such as electronics, health, solar cells, etc. In this study, details of the synthesis and characterization of copper selenide nanoparticles modified with gum arabic (GA) are reported. Also, through transmission electronic microscopy (TEM) analysis, the transformation of the morphology and particle size of copper selenide nanoparticles in aqueous solution was studied. In addition, we present an antimicrobial study with different microorganisms such as Staphylococcus aureus (S. aureus), Escherichia coli (E. coli) and Candida albiacans (C. albicans). Copper selenide nanoparticles were characterized by X-ray diffraction (XRD), Fourier-transform infrared spectroscopy (FTIR), thermogravimetric analysis (TGA), differential scanning calorimetry analysis (DSC) and TEM. XRD confirmed the crystal-line structure of the nanoparticles such as cubic berzelanite with a particle size of 6 nm ± 0.5. FTIR and TGA corroborated the surface modification of copper selenide nanoparticles with gum arabic, and DSC suggested a change in the structural phase from cubic to hexagonal. TEM analysis demonstrated that the surface modification of the Cu2-x Se NPs stabilized the nanostructure of the particles, preventing changes in the morphology and particle size. The antimicrobial susceptibility analysis of copper selenide nanoparticles indicated that they have the ability to inhibit the microbial growth of Staphylococcus aureus, Escherichia coli and Candida albicans.

High-purity La3-xTe4 Material with Superior Thermoelectric Performance Synthesized via Te-vapor Transport and Solid-State Diffusion.

La3-xTe4 is a very promising high-temperature candidate applied in next-generation Radioisotope Thermoelectric Generators (RTGs). Conventional synthesis of such materials is based on the mechanochemical method, which makes the sample difficult to purify due to the high-energy ball milling. In this report, a novel synthetic method is developed, which utilizes Te-vapor transport and solid-phase diffusion to efficiently produce the RE3-xTe4 phases (RE = La, Ce, Pr, Nd). Notably, this method obviates the requirement for high-energy ball-milling instruments, conventionally indispensable in the mechanochemical syntheses. For as-synthesized La2.74Te4 material, a high figure of merit of 1.5 is achieved at 1073 K, owning to the reduced electronic thermal conductivity with metal impurities well eliminated.

Structural phase transition and potential superconductivity initiated by pressure-driven in 1T-CrSe2.

The exploration of the superconducting properties of antiferromagnetic parent compounds containing transition metals under pressure provides a unique idea for finding and designing superconducting materials with better performance. In this paper, the close relationship between the possible superconductivity and structure phase transition of the typical van der Waals layered material 1T-CrSe2induced by pressure is studied by means of electrical transport and x-ray diffraction for the first time. We introduce the possibility of pressure-induced superconductivity at 20 GPa, with a criticalTcof approximately at 4 K. The superconductivity persists up to the highest measured pressure of 70 GPa, with a maximumTc∼ 5 K at 24 GPa. We observed a structure phase transition fromP-3m1 toC2/mspace group in the range of 9.4-11.7 GPa. The results show that the structural phase transition leads to the metallization of 1T-CrSe2and the further pressure effect makes the superconductivity appear in the new structure. The material undergoes a transition from a two-dimensional layered structure to a three-dimensional structure under pressure. This is the first time that possible superconductivity has been observed in 1T-CrSe2.

Electrochemical Deposition for Cultivating Nano- and Microstructured Electroactive Materials for Supercapacitors: Recent Developments and Future Perspectives.

The globe is currently dealing with serious issues related to the world economy and population expansion, which has led to a significant increase in the need for energy. One of the most promising energy devices for the next generation of energy technology is the supercapacitor (SC). Among the numerous nanostructured materials examined for SC electrodes, inorganic nanosheets are considered to be the most favorable electrode materials because of their excellent electrochemical performance due to their large surface area, very low layer thickness, and tunable diverse composition. Various inorganic nanosheets (NS) such as metal oxides, metal chalcogenides, metal hydroxides, and MXenes show substantial electrochemical activity. Herein, a comprehensive survey of inorganic NS arrays synthesized through the electrodeposition method is reported with the discussion on detailed growth mechanism and their application in the fabrication of SC electrodes/devices for powering flexible and wearable electronics appliances. To begin with, the first section will feature the various types of electrodeposition working mechanism, SC types and their working mechanisms, importance of nanosheet structure for SCs. This review gives a profound interpretation of supercapacitor electrode materials and their performances in different domains. Finally, a perspective on NS array through electrodeposition method applications in diverse fields is extensively examined.

Enhancement of superconductivity in Zr2S2C arising from phonon softening on transition from bulk to monolayer.

We report a new compound, Zr2S2C, belonging to the transition metal carbo-chalcogenide (TMCC) family. Through first-principles calculations, our analysis of phonon dispersion spectra indicates that the compound is dynamically stable in both bulk and monolayer forms. We systematically investigated the electronic structure, phonon dispersion, and electron-phonon coupling (EPC) driven superconducting properties in bulk and monolayer Zr2S2C. The results demonstrate the metallic character of bulk Zr2S2C, with a weak EPC strength (λ) of 0.41 and superconducting critical temperature (Tc) of ∼3 K. The monolayer Zr2S2C has an enhancedλof 0.62 andTcof ∼6.4 K. The increasedλvalue in the monolayer results from the softening of the acoustic phonon mode. We found that when biaxial strain is applied, the low energy acoustic phonon mode in monolayer becomes even softer. This softening leads to a transformation of the Zr2S2C monolayer from its initial weak coupling state (λ= 0.62) to a strongly coupled state, resulting in an increasedλvalue of 1.33. Consequently, the superconducting critical temperature experiences a twofold increase. These findings provide a theoretical framework for further exploration of the layered two-dimensional TMCC family, in addition to offering valuable insights.

Critical Review of Cu-Based Hole Transport Materials for Perovskite Solar Cells: From Theoretical Insights to Experimental Validation.

Despite the remarkable efficiency of perovskite solar cells (PSCs), long-term stability remains the primary barrier to their commercialization. The prospect of enhancing stability by substituting organic transport layers with suitable inorganic compounds, particularly Cu-based inorganic hole-transport materials (HTMs), holds promise due to their high valence band maximum (VBM) aligning with perovskite characteristics. This review assesses the advantages and disadvantages of these five types of Cu-based HTMs. Although Cu-based binary oxides and chalcogenides face narrow bandgap issues, the "chemical modulation of the valence band" (CMVB) strategy has successfully broadened the bandgap for Cu-based ternary oxides and chalcogenides. However, Cu-based ternary oxides encounter challenges with low mobility, and Cu-based ternary chalcogenides face mismatches in VBM alignment with perovskites. Cu-based binary halides, especially CuI, exhibit excellent properties such as wider bandgap, high mobility, and defect tolerance, but their stability remains a concern. These limitations of single anion compounds are insightfully discussed, offering solutions from the perspective of practical application. Future research can focus on Cu-based composite anion compounds, which merge the advantages of single anion compounds. Additionally, mixed-cation chalcogenides such as CuxM1-xS enable the customization of HTM properties by selecting and adjusting the proportions of cation M.

Mn2Ga2S5 and Mn2Al2Se5 van der Waals Chalcogenides: A Source of Atomically Thin Nanomaterials.

Layered chalcogenides containing 3d transition metals are promising for the development of two-dimensional nanomaterials with interesting magnetic properties. Both mechanical and solution-based exfoliation of atomically thin layers is possible due to the low-energy van der Waals bonds. In this paper, we present the synthesis and crystal structures of the Mn2Ga2S5 and Mn2Al2Se5 layered chalcogenides. For Mn2Ga2S5, we report magnetic properties, as well as the exfoliation of nanofilms and nanoscrolls. The synthesis of both polycrystalline phases and single crystals is described, and their chemical stability in air is studied. Crystal structures are probed via powder X-ray diffraction and high-resolution transmission electron microscopy. The new compound Mn2Al2Se5 is isomorphous with Mn2Ga2S5 crystallizing in the Mg2Al2Se5 structure type. The crystal structure is built by the ABCBCA sequence of hexagonal close-packing layers of chalcogen atoms, where Mn2+ and Al3+/Ga3+ species preferentially occupy octahedral and tetrahedral voids, respectively. Mn2Ga2S5 exhibits an antiferromagnetic-like transition at 13 K accompanied by the ferromagnetic hysteresis of magnetization. Significant frustration of the magnetic system may yield spin-glass behavior at low temperatures. The exfoliation of Mn2Ga2S5 layers was performed in a non-polar solvent. Nanolayers and nanoscrolls were observed using high-resolution transmission electron microscopy. Fragments of micron-sized crystallites with a thickness of 70-100 nanometers were deposited on a glass surface, as evidenced by atomic force microscopy.

Structurally disordered MoSe2 with rich 1T phase as a universal platform for enhanced photocatalytic hydrogen production.

The improvement of surface reactivity in noble-metal-free cocatalysts is crucial for the development of efficient and cost-effective photocatalytic systems. However, the influence of crystallinity on catalytic efficacy has received limited attention. Herein, we report the utilization of structurally disordered MoSe2 with abundant 1T phase as a versatile cocatalyst for photocatalytic hydrogen evolution. Using MoSe2/carbon nitride (CN) hybrids as a case study, it is demonstrated that amorphous MoSe2 significantly enhances the hydrogen evolution rate of CN, achieving up to 11.37 µmol h-1, surpassing both low crystallinity (8.24 µmol h-1) and high crystallinity MoSe2 (3.86 µmol h-1). Experimental analysis indicates that the disordered structure of amorphous MoSe2, characterized by coordination-unsaturated surface sites and a rich 1T phase with abundant active sites at the basal plane, predominantly facilitates the conversion of surface-bound protons to hydrogen. Conversely, the heightened charge transfer capacity of the highly crystalline counterpart plays a minor role in enhancing practical catalytic performance. This approach is applicable for enhancing the photocatalytic hydrogen evolution performance of various semiconducting photocatalysts, including CdS, TiO2, and ZnIn2S4, thereby offering novel insights into the advancement of high-performance non-precious catalysts through phase engineering.

Design Principles Guided by DFT Calculations and High-Throughput Frameworks for the Discovery of New Diamond-like Chalcogenide Thermoelectric Materials.

Rational design principles are one pathway to discovering new materials. However, technological breakthroughs rarely occur in this way because these design principles are usually based on incremental advances that seldom lead to disruptive applications. The emergence of machine-learning (ML) and high-throughput (HT) techniques has changed the paradigm, opening up new possibilities for efficiently screening large chemical spaces and creating on-the-fly design principles for the discovery of novel materials with desired properties. In this work, the approach is used to discover novel thermoelectric (TE) materials based on quaternary diamond-like chalcogenides. A HT framework that integrates density functional theory calculations, ML, and the solution of the Boltzmann transport equation is used to efficiently rationalize the transport properties of these compounds and identify those with potential as TE materials, achieving ZT values above 2.

Investigation into the physical characteristics of the compounds XBiSe2 (X = Li, Na or K).

CONTEXT: As new materials, the ternary chalcogenides have recently brought scientists' attention. These materials are a novel class of semiconducting chemical compounds. They allow the increase of the photo-conversion efficiency, the performance, and the cheap energy cost. Such materials also provide a wide range of physical and chemical applications. METHODS: The used investigation employs Density Functional Theory (DFT) implemented in the Wien2k package to systematically characterize the physical properties of ternary chalcogenide compounds XBiSe2 (X = Li, Na and K). Such method emphasizes their applicability to energy conversion technologies. Scrutinizing their electronic, optical, and thermoelectric properties elucidates the effect of alkali metal substitution on performance metrics. The results not only advance knowledge of these materials' physicochemical behaviors but also reveal their potential for tailored functionalization in next-generation energy and optoelectronic systems, marking a significant stride in material science and application-oriented research.

Emergence of two distinct phase transitions in monolayer CoSe2 on graphene.

Dimensional modifications play a crucial role in various applications, especially in the context of device miniaturization, giving rise to novel quantum phenomena. The many-body dynamics induced by dimensional modifications, including electron-electron, electron-phonon, electron-magnon and electron-plasmon coupling, are known to significantly affect the atomic and electronic properties of the materials. By reducing the dimensionality of orthorhombic CoSe2 and forming heterostructure with bilayer graphene using molecular beam epitaxy, we unveil the emergence of two types of phase transitions through angle-resolved photoemission spectroscopy and scanning tunneling microscopy measurements. We disclose that the 2 × 1 superstructure is associated with charge density wave induced by Fermi surface nesting, characterized by a transition temperature of 340 K. Additionally, another phase transition at temperature of 160 K based on temperature dependent gap evolution are observed with renormalized electronic structure induced by electron-boson coupling. These discoveries of the electronic and atomic modifications, influenced by electron-electron and electron-boson interactions, underscore that many-body physics play significant roles in understanding low-dimensional properties of non-van der Waals Co-chalcogenides and related heterostructures.

MOCHAs: An Emerging Class of Materials for Photocatalytic H2 Production.

Production of green hydrogen (H2) is a sustainable process able to address the current energy crisis without contributing to long-term greenhouse gas emissions. Many Ag-based catalysts have shown promise for light-driven H2 generation, however, pure Ag-in its bulk or nanostructured forms-suffers from slow electron transfer kinetics and unfavorable Ag─H bond strength. It is demonstrated that the complexation of Ag with various chalcogenides can be used as a tool to optimize these parameters and reach improved photocatalytic performance. In this work, metal-organic-chalcogenolate assemblies (MOCHAs) are introduced as effective catalysts for light-driven hydrogen evolution reaction (HER) and investigate their performance and structural stability by examining a series of AgXPh (X = S, Se, and Te) compounds. Two catalyst-support sensitization strategies are explored: by designing MOCHA/TiO2 composites and by employing a common Ru-based photosensitizer. It is demonstrated that the heterogeneous approach yields stable HER performance but involves a catalyst transformation at the initial stage of the photocatalytic process. In contrast to this, the visible-light-driven MOCHA-dye dyad shows similar HER activity while also ensuring the structural integrity of the MOCHAs. The work shows the potential of MOCHAs in constructing photosystems for catalytic H2 production and provides a direct comparison between known AgXPh compounds.

Phase-Centric MOCVD Enabled Synthetic Approaches for Wafer-Scale 2D Tin Selenides.

Following an initial nucleation stage at the flake level, atomically thin film growth of a van der Waals material is promoted by ultrafast lateral growth and prohibited vertical growth. To produce these highly anisotropic films, synthetic or post-synthetic modifications are required, or even a combination of both, to ensure large-area, pure-phase, and low-temperature deposition. A set of synthetic strategies is hereby presented to selectively produce wafer-scale tin selenides, SnSex (both x = 1 and 2), in the 2D forms. The 2D-SnSe2 films with tuneable thicknesses are directly grown via metal-organic chemical vapor deposition (MOCVD) at 200 °C, and they exhibit outstanding crystallinities and phase homogeneities and consistent film thickness across the entire wafer. This is enabled by excellent control of the volatile metal-organic precursors and decoupled dual-temperature regimes for high-temperature ligand cracking and low-temperature growth. In contrast, SnSe, which intrinsically inhibited from 2D growth, is indirectly prepared by a thermally driven phase transition of an as-grown 2D-SnSe2 film with all the benefits of the MOCVD technique. It is accompanied by the electronic n-type to p-type crossover at the wafer scale. These tailor-made synthetic routes will accelerate the low-thermal-budget production of multiphase 2D materials in a reliable and scalable fashion.

Vacancy Engineering in 2D Transition Metal Chalcogenide Photocatalyst: Structure Modulation, Function and Synergy Application.

Transition metal chalcogenides (TMCs) are widely used in photocatalytic fields such as hydrogen evolution, nitrogen fixation, and pollutant degradation due to their suitable bandgaps, tunable electronic and optical properties, and strong reducing ability. The unique 2D malleability structure provides a pre-designed platform for customizable structures. The introduction of vacancy engineering makes up for the shortcomings of photocorrosion and limited light response and provides the greatest support for TMCs in terms of kinetics and thermodynamics in photocatalysis. This work reviews the effect of vacancy engineering on photocatalytic performance based on 2D semiconductor TMCs. The characteristics of vacancy introduction strategies are summarized, and the development of photocatalysis of vacancy engineering TMCs materials in energy conversion, degradation, and biological applications is reviewed. The contribution of vacancies in the optical range and charge transfer kinetics is also discussed from the perspective of structure manipulation. Vacancy engineering not only controls and optimizes the structure of the TMCs, but also improves the optical properties, charge transfer, and surface properties. The synergies between TMCs vacancy engineering and atomic doping, other vacancies, and heterojunction composite techniques are discussed in detail, followed by a summary of current trends and potential for expansion.

Silver Copper Chalcogenide Thermoelectrics: Advance, Controversy, and Perspective.

Thermoelectric technology, which enables a direct and pollution-free conversion of heat into electricity, provides a promising path to address the current global energy crisis. Among the broad range of thermoelectric materials, silver copper chalcogenides (AgCuQ, Q = S, Se, Te) have garnered significant attention in thermoelectric community in light of inherently ultralow lattice thermal conductivity, controllable electronic transport properties, excellent thermoelectric performance across various temperature ranges, and a degree of ductility. This review epitomizes the recent progress in AgCuQ-based thermoelectric materials, from the optimization of thermoelectric performance to the rational design of devices, encompassing the fundamental understanding of crystal structures, electronic band structures, mechanical properties, and quasi-liquid behaviors. The correlation between chemical composition, mechanical properties, and thermoelectric performance in this material system is also highlighted. Finally, several key issues and prospects are proposed for further optimizing AgCuQ-based thermoelectric materials.

Crystal structures of ten phosphane chalcogenide complexes of gold(III) chloride and bromide.

The structures of ten phosphane chalcogenide complexes of gold(III) halides, with general formula R 1 3-n R 2 nPEAuX 3 (R 1 = t-butyl; R 2 = i-propyl; n = 0 to 3; E = S or Se; X = Cl or Br) are presented. The eight possible chlorido derivatives are: 9a, n = 3, E = S; 10a, n = 2, E = S; 11a, n = 1, E = S; 12a, n = 0, E = S; 13a, n = 3, E = Se; 14a, n = 2, E = Se; 15a, n = 1, E = Se; and 16a, n = 0, E = Se, and the corresponding bromido derivatives are 9b-16b in the same order. Structures were obtained for 9a, 10a (and a second polymorph 10aa), 11a (and its deutero-chloro-form monosolvate 11aa), 12a (as its di-chloro-methane monosolvate), 14a, 15a (as its deutero-chloro-form monosolvate 15aa, in which the solvent mol-ecule is disordered over two positions), 9b, 11b, 13b and 15b. The structures of 11a, 15a, 11b and 15b form an isotypic set, and those of compounds 10aa and 14a form an isotypic pair. All structures have Z' = 1. The gold(III) centres show square-planar coordination geometry and the chalcogenide atoms show approximately tetra-hedral angles (except for the very wide angle in 12a, probably associated with the bulky t-butyl groups). The bond lengths at the gold atoms are lengthened with respect to the known gold(I) derivatives, and demonstrate a considerable trans influence of S and Se donor atoms on a trans Au-Cl bond. Each compound with an isopropyl group shows a short intra-molecular contact of the type C-Hmethine⋯Xcis; these may be regarded as intra-molecular 'weak' hydrogen bonds, and they determine the orientation of the AuX 3 groups. The mol-ecular packing is analysed in terms of various short contacts such as weak hydrogen bonds C-H⋯X and contacts between the heavier atoms, such as X⋯X (9a, 10aa, 11aa, 15aa and 9b), S⋯S (10aa, 11a and 12a) and S⋯Cl (10a). The packing of the polymorphs 10a and 10aa is thus quite different. The solvent mol-ecules take part in C-H⋯Cl hydrogen bonds; for 15aa, a disordered solvent region at z ≃ 0 is observed. Structure 13b involves unusual inversion-symmetric dimers with Se⋯Au and Se⋯Br contacts, further connected by Br⋯Br contacts.