Potential of fruit seeds: Exploring bioactives and ensuring food safety for sustainable management of food waste.

Sweet cherry pits, date seeds, and grape seeds are abundant fruit by-products in the Mediterranean region. Assessing their antioxidant capacity is crucial for their valorization. Grape and date seeds exhibited higher concentrations of total phenolic and flavonoid contents, and significant antioxidant capacity. Epicatechin was the main flavonoid in sweet cherry pits and date seeds (29-85 mg/g), while vanillic acid was the predominant phenolic acid across all by-products (5-23 mg/g). However, some sweet cherry pit varieties exceeded Maximum Residue Levels (MRL) for five pesticides, while grape seeds contained thirteen fungicide residues, all below MRL. Ochratoxin A was detected in one date seed but below the limit of quantification. Additionally, grape seeds showed an Al content of approximately 130 mg/kg, along with levels of As, Cd, and Pb. Date seeds exhibited high potential for food and pharmaceutical applications, pending evaluation for chemical contaminants.

Using bioactive compounds to mitigate the formation of typical chemical contaminants generated during the thermal processing of different food matrices.

With rising consumer awareness of health and wellness, the demand for enhanced food safety is rapidly increasing. The generation of chemical contaminants during the thermal processing of food materials, including polycyclic aromatic hydrocarbons, heterocyclic aromatic amines, and acrylamide happens every day in every kitchen all around the world. Unlike extraneous chemical contaminants (e.g., pesticides, herbicides, and chemical fertilizers), these endogenic chemical contaminants occur during the cooking process and cannot be removed before consumption. Therefore, much effort has been invested in searching for ways to reduce such thermally induced chemical contaminants. Recently, the addition of bioactive compounds has been found to be effective and promising. However, no systematic review of this practical science has been made yet. This review aims to summarize the latest applications of bioactive compounds for the control of chemical contaminants during food thermal processing. The underlying generation mechanisms and the toxic effects of these chemical contaminants are discussed in depth to reveal how and why they are suppressed by the addition of certain bioactive ingredients. Examples of specific bioactive compounds, such as phenolic compounds and organic acids, as well as their application scenarios, are outlined. In the end, outlooks and expectations for future development are provided based on a comprehensive summary and reflection of references.

Contaminant and residue profiles in Lebanese food: a comparative analysis with global standards.

Lebanon's agricultural sector, known for its diverse crop and livestock production, faces challenges in the international market due to the presence of chemical residues and contaminants in its food exports. Recent rejections of these exports have raised global concerns about food safety, increasingly seen as vital for public health and economic prosperity. This review focuses on examining scientific studies about the levels of various chemical residues including pesticides, and veterinary drugs and contaminants like mycotoxins, and polycyclic aromatic hydrocarbons, and heavy metals in Lebanese food products. Findings indicate that these residues and contaminants often exceed both the maximum residue limits (MRLs) and maximum limits (MLs) set by the Codex Alimentarius and the European Union. The review concludes with recommendations for reducing these contaminants and residues to enhance Lebanon's food safety and quality, aligning with international standards, and mitigating the risk of export rejections.

Analysis of chemical contaminants in fish using high resolution mass spectrometry - A review.

High resolution mass spectrometry (HRMS) has become an important tool in environmental and food safety analysis. This review highlights how HRMS has been used to analyze chemical contaminants in fish. Measuring and documenting chemical contaminants in fish serves not only as an indicator of environmental conditions but can also monitor the health of these animals and help protect an important source of human food. The incidence and significance of contaminants including veterinary drugs, human drugs and personal care products, pesticides, persistent organic pollutants, per- and poly fluorinated substances, and marine toxins will be reviewed. The advantage of HRMS over traditional MS is its ability to expand the number of compounds that can be detected and identified. This is true whether HRMS is used for targeted analytes, or more broadly for suspect screening and nontargeted analyses. The classes of compounds, types of fish or seafood, options for data acquisition and analysis, and reports of unexpected findings from recent HMRS methods for chemical contaminants in fish are summarized.

Electrochemical sensing at the fingertips: Wearable glove-based sensors for detection of 4-nitrophenol, picric acid and diazepam.

A wearable glove-based sensor is a portable and practical approach for onsite detection/monitoring of a variety of chemical threats. Herein, we report a flexible and sensitive wearable sensor fabricated on the nitrile glove fingertips by stencil-printing technique. The working electrodes were modified with multiwalled carbon nanotubes (MWCNTs)/poly(3,4-ethylenedioxythiophene):poly(styrenesulfonate) (PEDOT:PSS) for sensitive and real-time analyses of hazardous or chemical treats, as picric acid (PA) explosive, diazepam (DZ) as drug-facilitated crimes and the emerging pollutant 4-nitrophenol (4-NP). The multi-sensing platform towards PA, 4-NP, and DZ offers the ability of in-situ qualitative and quantitative analyses of powder and liquid samples. A simple sampling by touching or swiping the fingertip sensor on the sample or surface under investigation using an ionic hydrogel combined with fast voltammetry measurement provides timely point-of-need analyses. The wearable glove-based sensor uses the square wave voltammetry (SWV) technique and exhibited excellent performance to detect PA, 4-NP, and DZ, resulting in limits of detection (LOD) of 0.24 µM, 0.35 µM, 0.06 µM, respectively, in a wide concentration range (from 0.5 µM to 100 µM). Also, we obtained excellent manufacturing reproducibility with relative standard deviations (RSD) in the range of 3.65%-4.61% using 7 different wearable devices (n = 7) and stability in the range of 4.86%-6.61% using different electrodes stored for 10 days at room temperature (n = 10), demonstrating the excellent sensor-to-sensor reproducibility and stability for reliable in-field measurements. The stretchable sensor presented great mechanical robustness, supporting up to 80 bending or stretching deformation cycles without significant voltammetric changes. Collectively, our wearable glove-based sensor may be employed for analyses of chemical contaminants of concern, such as explosives (PA), drugs (DZ), and emerging pollutants (4-NP), helping in environmental and public safety control.

Bioaccumulation of trace elements in marine mammals: New data and transplacental transfer on threatened species.

Coastal areas are affected by urban, industrial and agriculture pollutants runoff, wastewater and stormwater discharges, making this environment the final repository of chemical contaminants. These contaminants have the potential to spread out to the entire food chain, impacting marine life and the quality of their habitat. In this aspect, the concept of marine mammals as bioindicators provides an approach to the degree of contamination in the environment and to the identification and management of multiple sources of contaminants. The present study analyzed several elements like As, Ba, Cd, Cr, Cu, Hg, Mn, Mo, Ni, Pb, V and Zn in liver tissue from two dolphin species: Sotalia guianensis, a near-threatened species, and the vulnerable Pontoporia blainvillei. In the study, we also investigated if dolphins (population) recorded using the heaviest urban areas have higher concentrations of contaminants in their tissues. Dolphin samples (n = 40 S. guianensis; n = 97 P. blainvillei) were collected by daily monitoring carried out by Santos Basin Beach Monitoring Project (PMP-BS), from stranded individuals found in São Paulo state. The Spearman's rank correlation showed distinct correlations in the accumulation of trace elements by both species, indicating different sources of exposure to the elements studied or distinct biochemical processes between species. Interspecific and intraspecific variations were observed, possibly related to the individual distribution and feeding habits. Correlations were observed between age and concentrations of trace elements, positive for Cd, Hg and Mo. Finally, our findings indicate high levels of Cu, Zn, and concentrations of As, V and Hg in fetuses, in particular, an analysis was performed on a fetus found inside a stranded individual, indicating placental transfer as the first route of exposure for some elements.

Pharmaceutical Pollution Alters the Structure of Freshwater Communities and Hinders Their Recovery from a Fish Predator.

Freshwater ecosystems are under threat from rising pharmaceutical pollution. While such pollutants are known to elicit biological effects on organisms, we have limited knowledge on how these effects might cascade through food-webs, disrupt ecological processes, and shape freshwater communities. In this study, we used a mesocosm experiment to explore how the community impacts of a top-order predator, the eastern mosquitofish (Gambusia holbrooki), are mediated by exposure to environmentally relevant low (measured concentration: ∼10 ng/L) and high concentrations (∼110 ng/L) of the pervasive pharmaceutical pollutant fluoxetine. We found no evidence that exposure to fluoxetine altered the consumptive effects of mosquitofish on zooplankton. However, once mosquitofish were removed from the mesocosms, zooplankton abundance recovered to a greater extent in control mesocosms compared to both low and high fluoxetine-exposed mesocosms. By the end of the experiment, this resulted in fundamental differences in community structure between the control and fluoxetine-treated mesocosms. Specifically, the control mesocosms were characterized by higher zooplankton abundances and lower algal biomass, whereas mesocosms exposed to either low or high concentrations of fluoxetine had lower zooplankton abundances and higher algal biomass. Our results suggest that fluoxetine, even at very low concentrations, can alter aquatic communities and hinder their recovery from disturbances.

A practical and eco-friendly method for the determination of polycyclic aromatic hydrocarbons in açaí-based food products by vacuum-assisted sorbent extraction coupled to gas chromatography-mass spectrometry.

For the first time, a method for the simultaneous analysis of fifteen polycyclic aromatic hydrocarbons (PAHs), including light and heavy PAHs, in açaí-based food products (AFPs) was developed using vacuum-assisted sorbent extraction (VASE) combined with gas chromatography-mass spectrometry (GC-MS). The method requires no organic solvents and is amenable to full automation. To achieve optimal analytical extraction conditions, VASE parameters including stirring rate, extraction time, desorption temperature, desorption time, preheat time, and preheat temperature were optimized using sequential multivariate optimization. The method was validated and yielded limits of quantification below 1 µg kg-1 for all analytes, with recoveries ranging from 65 % to 112 % and good precision (≤11 % relative standard deviation). Additionally, the greenness and practical aspects of the method were investigated using the Green Analytical Procedure Index (GAPI), eco-scale, and the Blue Applicability Grade Index (BAGI), respectively. The VASE-GC-MS approach is suitable for routine analysis and exhibits characteristics of a green analytical method. No PAHs were detected above the limits of detection in thirty samples of AFPs.

Cyanotoxins in food: Exposure assessment and health impact.

The intricate nature of cyanotoxin exposure through food reveals a complex web of risks and uncertainties in our dietary choices. With the aim of starting to unravel this intricate nexus, a comprehensive review of 111 papers from the past two decades investigating cyanotoxin contamination in food was undertaken. It revealed a widespread occurrence of cyanotoxins in diverse food sources across 31 countries. Notably, 68% of the studies reported microcystin concentrations exceeding established Tolerable Daily Intake levels. Cyanotoxins were detected in muscles of many fish species, and while herbivorous fish exhibited the highest recorded concentration, omnivorous species displayed a higher propensity for cyanotoxin accumulation, exemplified by Oreochromis niloticus. Beyond fish, crustaceans and bivalves emerged as potent cyanotoxin accumulators. Gaps persist regarding contamination of terrestrial and exotic animals and their products, necessitating further exploration. Plant contamination under natural conditions remains underreported, yet evidence underscores irrigation-driven cyanotoxin accumulation, particularly affecting leafy vegetables. Finally, cyanobacterial-based food supplements often harbored cyanotoxins (57 % of samples were positive) warranting heightened scrutiny, especially for Aphanizomenon flos-aquae-based products. Uncertainties surround precise concentrations due to methodological variations (chemical and biochemical) and extraction limitations, along with the enigmatic fate of toxins during storage, processing, and digestion. Nonetheless, potential health consequences of cyanotoxin exposure via contaminated food include gastrointestinal and neurological disorders, organ damage (e.g. liver, kidneys, muscles), and even elevated cancer risks. While microcystins received significant attention, knowledge gaps persist regarding other cyanotoxins' accumulation, exposure, and effects, as well as combined exposure via multiple pathways. Intriguing and complex, cyanotoxin exposure through food beckons further research for our safer and healthier diets.

The EU Interreg Project "ADRINET": Assessment of Well-Known and Emerging Pollutants in Seafood and Their Potential Effects for Food Safety.

Anthropogenic activities lead to the spread of chemicals and biological materials, including plastic waste, toxic metals, and pharmaceuticals, of which the impact on the Mediterranean Sea is of high concern. In this context, the EU Interreg Italy-Albania-Montenegro Project "ADRINET (Adriatic Network for Marine Ecosystem) _244" (2018-2020) arises. It aims to carry out biomonitoring campaigns in the main commercial interest of fish and cephalopod species, such as Sparus aurata, Dicentrarchus labrax, Sepia spp., and Loligo spp. sampled in three different subregions of the Mediterranean Sea. The presence of the main environmental contaminants, such as cadmium, microplastics, and antibiotics was investigated in these seafood samples. Contamination by cadmium and antibiotics in the seafood investigated in our study was negligible. However, a high value of microplastics was detected in the stomach and gut of Sparus aurata and Dicentrarchus labrax. Overall, even though the presence of microplastics needs to be investigated by further studies, the results confirmed that the environmental conditions of the three bays investigated by the ADRINET project partners (Italy, Albania, Montenegro) are positive and not affected by intensive anthropogenic activity.

Seasonal screening of pesticide residues in beehive products collected from different districts in Egypt.

Pesticides are of immense importance in agriculture, but they might contaminate bees' products. In this study, samples of honey, pollen, and beeswax were collected, seasonally, from apiaries in Toshka (Aswan), El-Noubariya (El-Beheira), and Ismailia (Ismailia) cities in Egypt. The pesticide residues were analyzed using the GC-MS after being extracted and cleaned using the QuEChERS method. Results showed that samples from El-Noubariya had great content of residues followed by Ismailia, and finally Toshka. Samples collected during fall and winter had the highest pesticide residue contents. Specifically, the phenylconazole fungicide group was repeatedly detected in all the examined samples along with organophosphate insecticides. Beeswax samples had the greatest amounts of pesticide residues followed by pollen and then honey samples. Chlorpyrifos (0.07-39.16 ng/g) and profenofos (1.94-17.00 ng/g) were detected in honey samples and their products. Pyriproxyfen (57.12 ng/g) and chlorpyrifos-methyl (39.16 ng/g) were detected in great amounts in beeswax samples from Ismailia and El-Noubariya, respectively. Yet, according to health hazard and quotient studies, the amounts of pesticides detected in honey do not pose any health threats to humans.

Chemical contaminants in blood and their implications in chronic diseases.

Artificial chemical products are widely used and ubiquitous worldwide and pose a threat to the environment and human health. Accumulating epidemiological and toxicological evidence has elucidated the contributions of environmental chemical contaminants to the incidence and development of chronic diseases that have a negative impact on quality of life or may be life-threatening. However, the pathways of exposure to these chemicals and their involvements in chronic diseases remain unclear. We comprehensively reviewed the research progress on the exposure risks of humans to environmental contaminants, their body burden as indicated by blood monitoring, and the correlation of blood chemical contaminants with chronic diseases. After entering the human body through various routes of exposure, environmental contaminants are transported to target organs through blood circulation. The application of the modern analytical techniques based on human plasma or serum specimens is promising for determining the body burden of environmental contaminants, including legacy persistent organic pollutants, emerging pollutants, and inorganic elements. Furthermore, their body burden, as indicated by blood monitoring correlates with the incidence and development of metabolic syndromes, cancers, chronic nervous system diseases, cardiovascular diseases, and reproductive disorders. On this basis, we highlight the urgent need for further research on environmental pollution causing health problems in humans.

Screening and identification of unknown chemical contaminants in food based on liquid chromatography-high-resolution mass spectrometry and machine learning.

Unknown or unexpected chemical contaminants and/or their transformation products in food that may be harmful to humans need to be discovered for comprehensive safety evaluation. Liquid chromatography-high-resolution mass spectrometry (LC-HRMS) is a powerful tool for detecting chemical contaminants in food samples. However, identifying all of peaks in LC-HRMS is not possible, but if class information is known in advance, further identification will become easier. In this work, a novel MS2 spectra classification-driven screening strategy was constructed based on LC-HRMS and machine learning. First, the classification model was developed based on machine learning algorithm using class information and experimental MS2 data of chemical contaminants and other non-contaminants. By using the developed artificial neural network classification model, in total 32 classes of pesticides, veterinary drugs and mycotoxins were classified with good prediction accuracy and low false-positive rate. Based on the classification model, a screening procedure was developed in which the classes of unknown features in LC-HRMS were first predicted through the classification model, and then their structures were identified under the guidance of class information. Finally, the developed strategy was tentatively applied to the analysis of pork and aquatic products, and 8 chemical contaminants and 11 transformation products belonging to 8 classes were found. This strategy enables screening of unknown chemical contaminants and transformation products in complex food matrices.

Levels, patterns and risk assessment of PCDD/Fs and dl-PCBs through dietary exposure in the Valencian Region (Spain).

Polychlorinated dibenzo-p-dioxins and dibenzofurans (PCDD/Fs) and dioxin like polychlorinated biphenyls (dl-PCBs) levels were measured in representative vegetable oils and animal origin foodstuffs collected in a Total Diet Study carried out in the Valencian Region (Spain). A total amount of 3,300 food samples were collected and grouped into 5 main food groups: vegetable oils, meat and meat products, eggs, milk and dairy products and fish and sea products. The samples were analysed using gas chromatography coupled to high-resolution mass spectrometry (GC-HRMS). The food group which presented the highest concentration in wet weight (ww) for the sum of PCDD/Fs and dl-PCBs was fish and sea products (0.5 pg TEQ g-1 ww), whereas meat and meat products (0.6 pg TEQ g-1 lipid) showed the highest levels expressed in lipid terms. Occurrence data of PCDD/F and dl-PCBs were combined with consumption data to estimate the dietary exposure of adults (>15 years) and children (6-15 years). Finally, the estimated weekly intake (EWI) was calculated using a deterministic approach and considering the food consumption of the population, with fish and sea products being the main food group contributor. Likewise, considering the worst-case scenario (Upper Bound, UB), average EWI were 1.8 and 3.4 pg TEQ kg-1 body weight (bw) week-1 for adults and children, respectively. For children, the average EWI was almost twice above the tolerable weekly intake (TWI) of 2 pg TEQ kg-1 bw week-1 set by EFSA in 2018. In terms of risk characterisation, the overall obtained results showed that 19 % of adults and 43 % of children may exceed the TWI when using UB.

Graphene materials in pollution trace detection and environmental improvement.

Water scarcity is a pressing issue experienced in numerous countries and is expected to become increasingly critical in the future. Anthropogenic activities such as mining, agriculture, industries, and domestic waste discharge toxic contaminants into natural water bodies, causing pollution. Addressing these environmental crises requires tackling the challenge of removing pollutants from water. Graphene oxide (GO), a form of graphene functionalized with oxygen-containing chemical groups, has recently garnered renewed interest due to its exceptional properties. These properties include a large surface area, mechanical stability, and adjustable electrical and optical characteristics. Additionally, surface functional groups like hydroxyl, epoxy, and carboxyl groups make GO an outstanding candidate for interacting with other materials or molecules. Because of its expanded structural diversity and enhanced overall properties, GO and its composites hold significant promise for a wide range of applications in energy storage, conversion, and environmental protection. These applications encompass hydrogen storage materials, photocatalysts for water splitting, the removal of air pollutants, and water purification. Serving as electrode materials for various lithium batteries and supercapacitors. Graphene-based materials, including graphene, graphene oxide, reduced graphene oxide, graphene polymer nanocomposites, and graphene nanoparticle metal hybrids, have emerged as valuable tools in energy and environmental remediation technologies. This review article provides an overview of the significant impact of graphene-based materials in various areas. Regarding energy-related topics, this article explores the applications of graphene-based materials in supercapacitors, lithium-ion batteries, and catalysts for fuel cells. Additionally, the article investigates recent advancements in detecting and treating persistent organic pollutants (POPs) and heavy metals using nanomaterials. The article also discusses recent developments in creating innovative nanomaterials, nanostructures, and treatment methods for addressing POPs and heavy metals in water. It aims to present the field's current state and will be a valuable resource for individuals interested in nanomaterials and related materials.

Priority list of potential endocrine-disrupting chemicals in food chemical contaminants: a docking study and in vitro/epidemiological evidence integration.

Diet is an important exposure route of endocrine-disrupting chemicals (EDCs), but many unfiltered potential EDCs remain in food. The in silico prediction of EDCs is a popular method for preliminary screening. Potential EDCs in food were screened using Endocrine Disruptome, an open-source platform for inverse docking, to predict the binding probabilities of 587 food chemical contaminants with 18 human nuclear hormone receptor (NHR) conformations. In total, 25 contaminants were bound to multiple NHRs such as oestrogen receptor α/ß and androgen receptor. These 25 compounds mainly include pesticides and per- and polyfluoroalkyl substances (PFASs). The prediction results were validated with the in vitro data. The structural features and the crucial amino acid residues of the four NHRs were also validated based on previous literature. The findings indicate that the screening has good prediction efficiency. In addition, the epidemic evidence about endocrine interference of PFASs in food on children was further validated through this screening. This study provides preliminary screening results for EDCs in food and a priority list for in vitro and in vivo research.

Development of Photonic Multi-Sensing Systems Based on Molecular Gates Biorecognition and Plasmonic Sensors: The PHOTONGATE Project.

This paper presents the concept of a novel adaptable sensing solution currently being developed under the EU Commission-founded PHOTONGATE project. This concept will allow for the quantification of multiple analytes of the same or different nature (chemicals, metals, bacteria, etc.) in a single test with levels of sensitivity and selectivity at/or over those offered by current solutions. PHOTONGATE relies on two core technologies: a biochemical technology (molecular gates), which will confer the specificity and, therefore, the capability to be adaptable to the analyte of interest, and which, combined with porous substrates, will increase the sensitivity, and a photonic technology based on localized surface plasmonic resonance (LSPR) structures that serve as transducers for light interaction. Both technologies are in the micron range, facilitating the integration of multiple sensors within a small area (mm2). The concept will be developed for its application in health diagnosis and food safety sectors. It is thought of as an easy-to-use modular concept, which will consist of the sensing module, mainly of a microfluidics cartridge that will house the photonic sensor, and a platform for fluidic handling, optical interrogation, and signal processing. The platform will include a new optical concept, which is fully European Union Made, avoiding optical fibers and expensive optical components.

Probabilistic Risk Characterization of Heavy Metals in Peruvian Coffee: Implications of Variety, Region and Processing.

Heavy metals are chemical contaminants, toxic, potentially carcinogenic and/or mutagenic, stable, persistent and are of concern in the food chain. The risk to the consumer of the presence of inorganic arsenic (iAs), cadmium (Cd), chromium (Cr), mercury (Hg) and lead (Pb) in five varieties (Bourbon, Típica, Catimor, Caturra and Pache) of parchment coffee from five regions (Amazonas, Cajamarca, Cusco, Huánuco and San Martín) was investigated in this study. A predictive model of the stages of coffee bean hulling, roasting and infusion was built to simulate the process. The results by region showed significant differences in which San Martín had the highest iAs, Cr and Pb values. The variety was only significant for Cr, of which Pache presented the highest concentration. The Cd and Hg values were below the detection limits. The hazard index (HI) was less than 1 for iAs, Cd, Cr and Hg and the combination of margin of exposure and the probability of exceedance (MOE-POE) for Pb indicated that an adverse health effect was not likely. The cancer risk (CR) for iAs and Pb in the 95th percentile was considered as both high and acceptable, respectively.

Water chemistry poses health risks as reliance on groundwater increases: A systematic review of hydrogeochemistry research from Ethiopia and Kenya.

Reliance on groundwater is increasing in Sub-Saharan Africa as development programmes work towards improving water access and strengthening resilience to climate change. In lower-income areas, groundwater supplies are typically installed without water quality treatment infrastructure or services. This practice is underpinned by an assumption that untreated groundwater is typically suitable for drinking due to the relative microbiological safety of groundwater compared to surface water; however, chemistry risks are largely disregarded. This article systematically reviews groundwater chemistry results from 160 studies to evaluate potential health risk in two case countries: Ethiopia and Kenya. Most studies evaluated drinking water suitability, focusing on priority parameters (fluoride, arsenic, nitrate, or salinity; 18 %), pollution impacts (10 %), or overall suitability (45 %). The remainder characterised general hydrogeochemistry (13 %), flow dynamics (10 %), or water quality suitability for irrigation (3 %). Only six studies (4 %) reported no exceedance of drinking water quality thresholds. Thus, chemical contaminants occur widely in groundwaters that are used for drinking but are not regularly monitored: 78 % of studies reported exceedance of contaminants that have direct health consequences ranging from hypertension to disrupted cognitive development and degenerative disease, and 81 % reported exceedance of aesthetic parameters that have indirect health impacts by influencing perception and use of groundwater versus surface water. Nevertheless, the spatiotemporal coverage of sampling has substantial gaps and data availability bias is driven by a) the tendency for research to concentrate in areas with known water quality problems, and b) analytical capacity limitations. Improved in-country analytical capacity could bolster more efficient assessment and prioritisation of water chemistry risks. Overall, this review demonstrates that universal and equitable access to safe drinking water (Sustainable Development Goal target 6.1) will not be achieved without wider implementation of groundwater treatment, thus a shift is required in how water systems are designed and managed.

Pets, Genuine Tools of Environmental Pollutant Detection.

In a shared environment, our companion animals became unintended sentinels for pollutant exposure consequences, developing even earlier similar conditions to humans. This review focused on the human-pet cohabitation in an environment we all share. Alongside other species, canine and feline companions are veritable models in human medical research. The latency period for showing chronic exposure effects to pollutants is just a few years in them, compared to considerably more, decades in humans. Comparing the serum values of people and their companion animals can, for example, indicate the degree of poisonous lead load we are exposed to and of other substances as well. We can find 2.4 times higher perfluorochemicals from stain- and grease-proof coatings in canine companions, 23 times higher values of flame retardants in cats, and 5 times more mercury compared to the average levels tested in humans. All these represent early warning signals. Taking these into account, together with the animal welfare orientation of today's society, finding non-invasive methods to detect the degree of environmental pollution in our animals becomes paramount, alongside the need to raise awareness of the risks carried by certain chemicals we knowingly use.