RESUMO
Transition-metal-based oxygen evolution reaction (OER) catalysts have attracted widespread attention due to their inexpensive prices, unique layered structures, and rich active sites. Currently, designing low-cost, sustainable, and simple synthesis methods is essential for the application of transition-metal-based catalysts. Here, magnetic field (MF)-assisted chemical corrosion, as a novel technology, is adopted to construct superior OER electrocatalysts. The produced Ni(Fe)(OH)2-Fe2O3 electrode exhibits an overpotential of 272 mV at a current density of 100 mA cm-2, presenting a 64 mV reduction compared to the electrode without an MF. The experimental results indicate that an MF can induce the directional growth of Fe2O3 rods and reduce their accumulation. In addition, an external MF is beneficial for the lattice dislocation of the obtained catalysts, which can increase the surface free energy, thus reducing the activation energy and accelerating the electrochemical reaction kinetics. This work effectively combines a magnetic field with chemical corrosion and electrochemical energy, which offers a novel strategy for the large-scale development of environmentally friendly and superior electrocatalysts.
RESUMO
The enzyme-like properties of nanozymes may be considerably affected by the structure and surface groups, which thus need to be optimized. Here, through a simple NaOH chemical corrosion method, the chemical structure similar to N-Methylpyrrolidone (NMP), which possessed intrinsic oxidase-like activity, was introduced into polypyrrole (PPy), and then this nanomaterial became oxygen-functionalized PPy (o-PPy) with excellent oxidase-like activity from PPy without this property. Furthermore, after compounding magnetic Fe3O4, the obtained nanocomposites Fe3O4@o-PPy nanoparticles (Fe3O4@o-PPy NPs) showed superiorities in separation during synthesis and real-time control of enzyme catalysis. Studies have found that the enzymatic activity of Fe3O4@o-PPy NPs depended on the amount of functionalized oxygen and the conjugation extent of o-PPy. Fe3O4@o-PPy NPs had efficient oxidase-like activity under a wide range of pH and temperature. Based on the oxidase-like activity of Fe3O4@o-PPy NPs, a colorimetric sensor for glutathione (GSH), which presented rich color changes and satisfactory colorimetric resolution by adding the amaranth, was realized. We believe that the functional modification and structural regulation of PPy can not only realize its wider application but also promote the discovery of novel and efficient nanozymes.
Assuntos
Colorimetria , Glutationa , Oxigênio , Polímeros , Pirróis , Pirróis/química , Colorimetria/métodos , Polímeros/química , Oxigênio/química , Glutationa/química , Glutationa/análise , Oxirredutases/química , Oxirredutases/metabolismo , Concentração de Íons de Hidrogênio , Materiais Biomiméticos/químicaRESUMO
Ni-rich layered oxides have received significant attention as promising cathode materials for Li-ion batteries due to their high reversible capacity. However, intergranular and intragranular cracks form at high state-of-charge (SOC) levels exceeding 4.2 V (vs. Li/Li+), representing a prominent failure mechanism of Ni-rich layered oxides. The nanoscale crack formation at high SOC levels is attributed to a significant volume change resulting from a phase transition between the H2 and H3 phases. Herein, in contrast to the electrochemical crack formation at high SOC levels, another mechanism of chemical crack and pit formation on a nanoscale is directly evidenced in fully lithiated Ni-rich layered oxides (low SOC levels). This mechanism is associated with intergranular stress corrosion cracking, driven by chemical corrosion at elevated temperatures. The nanoscopic chemical corrosion behavior of Ni-rich layered oxides during aging at elevated temperatures is investigated using high-resolution transmission electron microscopy, revealing that microcracks can develop through two distinct mechanisms: electrochemical cycling and chemical corrosion. Notably, chemical corrosion cracks can occur even in a fully discharged state (low SOC levels), whereas electrochemical cracks are observed only at high SOC levels. This finding provides a comprehensive understanding of the complex failure mechanisms of Ni-rich layered oxides and provides an opportunity to improve their electrochemical performance.
RESUMO
The research aimed to examine the impact of different pH solutions on the tensile mechanical properties of saturated and natural sandstone specimens. The study utilized the WHY-300/10 microcomputer-controlled pressure testing machine to conduct Brazil splitting tests and employed acoustic emission and local dynamic strain testing techniques. The results indicated the tensile strength and split tensile modulus of the sandstone specimens gradually decreased with the polarisation of the solution pH, and the acoustic emission signal ring number monitoring values showed an increasing trend. The pH of the soaking solution followed an exponential decay pattern over time, eventually tending towards weak alkalinity. A new damage variable based on the cumulative ring count after chemical corrosion was defined to indirectly analyze the degree of corrosion degradation. It was discovered that in acidic or alkaline environments, the internal crystals of the rock are dissolved, weakening the mineral interconnections and causing a deterioration in tensile stress and strength. These findings can provide valuable insights for ensuring the safety and stability of the Denglou Mountain Tunnel in Yunnan Province.
RESUMO
Aiming at the problem of chemical-mechanics-hydro (C-M-H) action encountered by rocks in underground engineering, chemical damage variables, water damage variables, and force damage variables are introduced to define the degree of degradation of rock materials. Stone is selected as the sample for acid corrosion treatment at pH 3, 4, and 7, and a chemical damage factor is defined that coupled the pH value and duration of exposure. Then based on the spatial mobilized plane (SMP) criterion and the Lemaitre strain equivalence hypothesis, this research develops a constitutive model considering rock chemical corrosion-water-confining pressure damage. The proposed damage constitutive model employs the extremum method to ascertain the two Weibull distribution parameters (m and F0) by theoretical derivation and exhibits satisfactory conformity between the theoretical and experimental curves. The damage constitutive model can be consistent in the stress-strain characteristics of the rock triaxial compression process, which verifies the rationality and reliability of the model parameters. The model effectively represents the mechanical properties and damage characteristics of rocks when subjected to the combined influence of water chemistry and confinement. The presented model contributes to a better understanding of tangible rock-engineered structures subjected to chemical corrosion in underwater environments.
RESUMO
In order to accurately describe the characteristics of each stage of rock creep behavior under the combined action of acid environment and true triaxial stress, based on damage mechanics, chemical damage is connected with elastic modulus; thus, the damage relations considering creep stress damage and chemical damage are obtained. The elastic body, nonlinear Kelvin body, linear Kelvin body, and viscoelastic-plastic body (Mogi-Coulomb) are connected in series, and the actual situation under the action of true triaxial stress is considered at the same time. Therefore, a damage creep constitutive model considering the coupling of rock acid corrosion and true triaxial stress is established. The parameters of the deduced model are identified and verified with the existing experimental research results. The yield surface equation of rock under true triaxial stress is obtained by data fitting, and the influence of intermediate principal stress on the creep model is discussed. The derived constitutive model can accurately describe the characteristics of each stage of true triaxial creep behavior of rock under acid environment.
RESUMO
A compact surface plasmon resonance sensor based on an H-shaped optical fiber is proposed and demonstrated. The H-shaped optical fiber was fabricated experimentally by using hydrofluoric acid to controllably corrode the polarization-maintaining fiber. A satisfactory distance between the outer surface of the fiber and the core can be achieved, and then the surface plasmon resonance effect can be excited by coating a metal film of appropriate thickness on the surface of the fiber. This technology can realize the preparation of multiple samples at one time, compared to the traditional side-polishing technique. The H-shaped optical fiber obtained from corrosion exhibits a high surface quality and short lengths, down to only a few hundred microns. The effects of the proposed H-shaped optical fiber on spectral properties are induced by process parameters, including fiber remaining thickness, coating thickness and fiber length, and were investigated in detail. The prepared sensor was used for the specific detection of human IgG, and the minimum human IgG concentration that the sensor can distinguish is 3.4 µg/mL. Such a compact surface plasmon resonance fiber sensor has the advantages of an easy fabrication, good consistency and low cost, and is expected to be applied in the specific detection of biomarkers.
Assuntos
Fibras Ópticas , Ressonância de Plasmônio de Superfície , Humanos , Imunoglobulina GRESUMO
Chemical corrosion has a significant impact on the properties of rock materials. To study the mechanical behavior and energy mechanism of rock under chemical corrosion, this paper took the sandstone of Haitangshan tunnel in Fuxin as the research object, used a Na2SO4 solution to simulate different chemical environments, carried out a triaxial loading test on sandstone through the MTS815.02 test system, and analyzed the mechanical parameters and energy damage evolution law of sandstone under different chemical environments. The test results showed that the basic mechanical parameters (peak strength σpk, peak strain εpk, elastic modulus E, cohesion c, and internal friction angle φ) and characteristic stress parameters (closure stress σcc, initiation stress σci, and dilatancy stress σcd) of sandstone first increased and then decreased with the increase of pH in the Na2SO4 solution, Poisson's ratio µ showed the opposite trend, and the extreme values of all parameters were taken when pH = 7. The influence degree of different pHs on the mechanical parameters of sandstone were as follows: strong acid environment (pH ≤ 4) > strong alkali environment (pH ≥ 10) > weak acid environment (4 ≤ pH < 6) > weak alkali environment (8 ≤ pH < 10) > neutral environment (6 < pH< 8). The total energy and elastic strain energy increased first and then decreased, and the dissipated energy was the opposite. The damage variable decreased first and then increased. With the increasing concentration of the Na2SO4 solution, all the above parameters changed monotonically. Based on the energy theory, the damage evolution equation considering the effect of the Na2SO4 concentration was established. Combined with the test data, the model was verified and the result was good. Under the action of Na2SO4 corrosion, Ca2+ in calcite and Fe2+ in hematite were dissolved and precipitated. With the gradual increase of Ca2+ and Fe2+ concentration, the damage variable increased gradually. The relationship between the two ion concentrations and the damage variable approximately satisfied a linear function.
RESUMO
This study concerns the influence of chemical corrosion and geometric parameters on the macroscopic damage characteristics of brittle limestone containing a kinked fissure under uniaxial compression. The specimens are prepared in chemical solutions with different NaCl concentrations and pH values. The acoustic emission (AE) technique is adopted to detect the inner distortion of the failure behaviour. The physical process of the crack coalescence of kinked fissures is synchronously captured by a high-speed camera. Seven failure patterns are identified based on the final failure mode and the failure process. Furthermore, the stress intensity factor of kinked cracks under chemical corrosion is obtained by a theoretical analysis. Chemical erosion with an acidic solution has a relatively strong effect on the compressive strength of the tested specimen, while the initial crack angle is not affected by short-term chemical corrosion.
RESUMO
Titanium is considered to be a metal material with the best biological safety. Studies have proved that the titanium implanted in the bone continuously releases titanium particles (Ti particles), significantly increasing the total titanium content in human body. Generally, Ti particles are released slowly without causing a systemic immune response. However, the continuous increased local concentration may result in damage to the intraepithelial homeostasis, aggravation of inflammatory reaction in the surrounding tissues, bone resorption and implant detachment. They also migrate with blood flow and aggregate in the distal organ. The release of Ti particles is affected by the score of the implant surface structure, microenvironment wear and corrosion, medical operation wear, and so on, but the specific mechanism is not clear. Thus, it difficult to prevent the release completely. This paper reviews the causes of the Ti particles formation, the damage to the surrounding tissue, and its mechanism, in particular, methods for reducing the release and toxicity of the Ti particles.
Assuntos
Implantes Dentários , Titânio/química , Corrosão , Humanos , Inflamação/metabolismo , Propriedades de Superfície , Titânio/sangueRESUMO
The transmission of sulfate ions in concrete results in formation of calcium sulfoaluminate crystals due to chemical reactions. The expansion of calcium sulfoaluminate crystals is the main cause of concrete corrosion damage. In this study, ultrasonic analysis was used to detect the modulus change of concrete due to sulfate corrosion to obtain the basic law of corrosion damage evolution. An exponential growth model was developed for the internal expansion force based on the chemical reaction rate of calcium sulfoaluminate crystallization. Then, the evolution equation of the number density of microcracks was derived based on their initiation and balance conditions. Finally, a statistical model was developed for the concrete damage evolution by integrating the volume of microcracks. It is shown that the statistical evolution model can well characterize the evolution of concrete corrosion damage.
RESUMO
Sensor technology is one of the three pillars of information technology. This paper aims to discuss the problems of insensitive detection, poor stability, and uncomfortable wearing of sensors in the fields of human-computer interaction, 5G communication, and medical detection. A sensing unit with a microstructured flexible sensing front end is a cone-like structure with a single size of 18-22 µm. They are evenly distributed and can reach 2500 units per square millimeter. In the pressure range, the sensitivity of the sensor unit is 0.6 KPa-1 (no microstructure sensitivity at 0.15 KPa-1), and the response time is fast (<600 ms). After 400 repeated stretching experiments, the sensor unit can still maintain a stable output signal. Due to its flexible characteristics (50% tensile conductivity), the sensor unit can act on human skin and other curved surfaces. According to the prepared sensing unit, good test results can be obtained on the testing of mechanical devices, curved surfaces of human bodies, and non-contact methods. It is observed that the flexible sensor can be applied to various test occasions, and the manufacturing process of the sensing unit will provide new ideas and methods for the preparation of the flexible sensor technology.
RESUMO
The study was carried out to evaluate five SiMo cast iron grades and their resistance to chemical corrosion at elevated temperature. Corrosion tests were carried out under conditions of an actual cyclic operation of a retort coal-fired boiler. The duration of the study was 3840 h. The range of temperature changes during one cycle was in the range of 300-650 °C. Samples of SiMo cast iron with Si content at the level of 5% and variable Mo content in the range 0%-2.5% were used as the material for the study. The examined material was subjected to preliminary metallographic analysis using scanning microscopy and an Energy dispersive spectroscopy (EDS) system. The chemical composition was determined on the basis of a Leco spectrometer and a Leco carbon and sulfur analyzer. The examination of the oxide layer was carried out with the use of Scanning electron microscope (SEM), EDS, and X-ray diffraction (XRD) methods. It was discovered that, in the analyzed alloys, oxide layers consisting of Fe2O3, Fe3O4, SO2, and Fe2SiO4 were formed. The analyzed oxide layers were characterized by high adhesion to the substrate material, and their total thickness was about 20 µm.