Exploring the cationic surfactant adsorption efficiency at concentrations relative to the critical micelle concentration by SA/SiO2 microspheres.

Studying the adsorption behavior of cationic surfactants can help to develop more effective strategies to limit their dispersion in the environment. However, there have few studies on the adsorption of cationic surfactants from the perspective of critical micelle concentration (CMC). In this study, with cetyltrimethylammonium bromide (CTAB) and octadecyl trimethylammonium bromide (OTAB) serving as the model cationic surfactants, the effect of CMC on the adsorption behavior of cationic surfactant onto the surface of sodium alginate/silica (SA/SiO2) microspheres was systematically revealed. The adsorption mechanism relative to CMC was investigated under different conditions, including surfactant concentration, pH, temperature, and adsorption time. The results suggest that at identical concentrations, the smaller the CMC value of the cationic surfactants, the greater the adsorption amount (qt). qt for CTAB and OTAB were 583.2 and 678.0 mg/g respectively, with the concentration higher than their CMC value. When the concentration was lower than the CMC value of the cationic surfactants, qt for CTAB and OTAB were 123.2 and 138.7 mg/g, respectively. The CMC value of CTAB was lower than that of OTAB under identical conditions, suggesting that the adsorption of cationic surfactants is related to their CMC. These results are beneficial for the removal of cationic surfactants by adsorption methods.

Effects of side-chain lengths on the structure and properties of anhydrides modified starch micelles: Experimental and DPD simulation studies.

Anhydride-modified starch micelles have great potential in the delivery of hydrophobic guest molecules. This study aimed to experimentally explore the effects of side-chain lengths on the structure and properties of anhydride-modified starch micelles, and to visualize the self-assembly and loading process of these micelles through Dissipative particle dynamics (DPD) simulations. Starch micelles could only form when the carbon chain length exceeded four. The highly hydrophobic C18 starch micelle exhibited the minimum particle size (65 nm) and maximum loading capability (59.10 µg/mg). For each addition carbon atom in the anhydride side chains, the critical micelle concentration (CMC) of starch micelles decreased average of 1.79 %. Thermodynamic results showed that the micellization was an entropy-dominated driven process, and longer carbon chains enhanced the stability of starch micelles. DPD results showed that the starch chains formed the small clusters then spherical aggregates and finally core-shell structure spherical micelle. Curcumin was loaded into micelles by adjoint aggregation-micellization-adsorption mechanism. Overall, this study provides microscopic insight into the micellization and drug-loading mechanisms for anhydrides modified starch micelles.

Determining interfacial tension and critical micelle concentrations of surfactants from atomistic molecular simulations.

Hypothesis Atomistically-detailed models of surfactants provide quantitative information on the molecular interactions and spatial distributions at fluid interfaces. Hence, it should be possible to extract from this information, macroscopical thermophysical properties such as interfacial tension, critical micelle concentrations and the relationship between these properties and the bulk fluid surfactant concentrations. Simulations and Experiments Molecular-scale interfacial of systems containing n-dodecyl ß-glucoside (APG12) are simulated using classical molecular dynamics. The bulk phases and the corresponding interfacial regions are all explicitly detailed using an all-atom force field (PCFF+). During the simulation, the behaviour of the interface is analyzed geometrically to obtain an approximated value of the critical micelle concentration (CMC) in terms of the surfactant area number density and the interfacial tension is assessed through the analysis of the forces amongst molecules. New experimental determinations are reported for the surface tension of APG12 at the water/air and at the water/n-decane interfaces. Findings We showcase the application of a thermodynamic framework that inter-relates interfacial tensions, surface densities, CMCs and bulk surfactant concentrations, which allows the in silico quantitative prediction of interfacial tension isotherms.

Mechanistic Insights into Micelle-Enhanced Nanofiltration for Heavy Metal Removal: Transformation of Ion Transport and Fouling Phenomena.

Toxic heavy metals are widely present in typical scenarios, such as mines and electroplating wastewater, presenting significant risks to biological and environmental safety. Membrane processes encounter a challenge in effectively intercepting heavy metals due to their small hydration radius. This research showcases the high efficiency of micelle-enhanced nanofiltration (MENF) in removing heavy metals. At the critical micelle concentration, sodium dodecyl sulfate demonstrated a high removal of Cu2+, Ni2+, Zn2+, and Cd2+ while maintaining substantial potential for complexation of heavy metals. The formation of micelles and the bonding of heavy metals with surfactants bolstered the resistance of heavy metal ions to transmembrane transport. The presence of heavy metals in ionic form in wastewater facilitated their complexation with surfactants or micelles. Notably, the valence state and concentration of interfering ions in the environment could slightly influence the removal of heavy metals by MENF. Additionally, MENF displayed remarkable antifouling properties. The loose gel layer created by surfactant molecules and the micelle enhanced the membrane permeability and reduced the scaling tendency of heavy metals. This study contributes to an improved understanding of the mechanisms involved in heavy metal rejection by using MENF.

Effect of surfactant type and concentration on the gas-liquid mass transfer in biotrickling filters used for air pollution control.

Volatile organic compounds (VOCs) emitted into the atmosphere negatively affect the environment and human health. Biotrickling filtration, an effective technology for treating VOC-laden waste gases, faces challenges in removing hydrophobic VOCs due to their low water solubility and therefore limited bioavailability to microorganisms. Consequently, the addition of (bio)surfactants has proven to be a promising strategy to enhance the removal of hydrophobic VOCs in biotrickling filters (BTFs). Yet, up to now, no single study has ever performed a mass transfer characterization of a BTF under (bio)surfactants addition. In this study, the effect of (bio)surfactant addition on the gas-liquid mass transfer characteristics of two BTFs was measured by using oxygen (O2) as a model gas. Through an empirical correlation, the mass transfer coefficients (kLa) of two hydrophobic VOCs, toluene and hexane, which are of industrial and environmental significance, were estimated. One BTF was filled with expanded perlite, while the other with a mixture of compost and wood chips (C + WC). Both BTFs were operated under different liquid velocities (UL: 0.95 and 1.53 m h-1). Saponin, a biological surfactant, and Tween 80, a synthetic surfactant, were added to the recirculating liquid at different critical micelle concentrations (CMCs: 0-3 CMC). The higher interfacial and surface area of the perlite BTF compared to the C + WC BTF led to higher kLaO2 values regardless of the operational condition: 308 ± 18-612 ± 19 h-1 versus 42 ± 4-177 ± 24 h-1, respectively. Saponin addition at 0.5 and 1 CMC had positive effects on the perlite BTF, with kLaO2 values two times higher compared to those at 0 CMC. Tween 80 exhibited a neutral or slightly positive effect on the mass transfer of both BTFs under all conditions. Overall, the CMC, along with the physical characteristics of the packing materials and the operational conditions evaluated explained the results obtained. This study provides fundamental data essential to improve the performance and design of BTFs for hydrophobic VOCs abatement.

The Physicochemical and Functional Properties of Biosurfactants: A Review.

Surfactants, also known as surface-active agents, have emerged as an important class of compounds with a wide range of applications. However, the use of chemical-derived surfactants must be restricted due to their potential adverse impact on the ecosystem and the health of human and other living organisms. In the past few years, there has been a growing inclination towards natural-derived alternatives, particularly microbial surfactants, as substitutes for synthetic or chemical-based counterparts. Microbial biosurfactants are abundantly found in bacterial species, predominantly Bacillus spp. and Pseudomonas spp. The chemical structures of biosurfactants involve the complexation of lipids with carbohydrates (glycolipoproteins and glycolipids), peptides (lipopeptides), and phosphates (phospholipids). Lipopeptides, in particular, have been the subject of extensive research due to their versatile properties, including emulsifying, antimicrobial, anticancer, and anti-inflammatory properties. This review provides an update on research progress in the classification of surfactants. Furthermore, it explores various bacterial biosurfactants and their functionalities, along with their advantages over synthetic surfactants. Finally, the potential applications of these biosurfactants in many industries and insights into future research directions are discussed.

Prediction of critical micelle concentration for per- and polyfluoroalkyl substances.

In this study, we focus on the development of Quantitative Structure-Property Relationship (QSPR) models to predict the critical micelle concentration (CMC) for per- and polyfluoroalkyl substances (PFASs). Experimental CMC values for both fluorinated and non-fluorinated compounds were meticulously compiled from existing literature sources. Our approach involved constructing two distinct types of models based on Support Vector Machine (SVM) algorithms applied to the dataset. Type (I) models were trained exclusively on CMC values for fluorinated compounds, while Type (II) models were developed utilizing the entire dataset, incorporating both fluorinated and non-fluorinated compounds. Comparative analyses were conducted against reference data, as well as between the two model types. Encouragingly, both types of models exhibited robust predictive capabilities and demonstrated high reliability. Subsequently, the model having the broadest applicability domain was selected to complement the existing experimental data, thereby enhancing our understanding of PFAS behaviour.

Binary mixture of ionic liquid and span 80 for oil spill remediation: Synthesis and performance evaluation.

The synthesis of new surfactants helps to mitigate the environmental and financial effects of oil spills by providing efficient cleanup options. Herein, this study provides the development of a binary mixture of Span 80 and Choline myristate [Cho][Mys], a surface-active ionic liquid (SAIL) as green dispersant for oil spill remediation. The synergistic interaction at a 60:40 (w/w) ratio significantly lowered the critical micelle concentration (cmc) to 0.029 mM. Dispersion efficiency tests with Arab crude oil showed optimal performance at a 60:40 ratio of Span 80 and [Cho][Mys] (1:25 dispersant to oil ratio, v/v), achieving 81.16 % dispersion effectiveness in the baffled flask test. The binary mixture demonstrated superior emulsion stability (6 h) and the lowest interfacial tension (1.12 mN/m). Acute toxicity experiments revealed the dispersant's practical non-toxicity with an LC50 value of 600 mg/L. Overall, this environmentally benign surfactant combination shows promise as a safe and effective oil spill dispersant.

Application of Alcohols to Inhibit the Formation of Ca(II) Dodecyl Sulfate Precipitate in Aqueous Solutions.

The presence of alkaline earth cations, in particular, Ca2+ and Mg2+ ions in brine, causes undesired effects in solutions containing anionic surfactants because of precipitate formation. In the present study, an anionic surfactant, sodium dodecyl sulfate (SDS), was investigated, focusing on the determination of various properties (surface tension, critical micelle concentration, micelle size, turbidity) in the presence of alcohols and, in particular, the inhibition of the precipitation of SDS with calcium ions. The calcium ions were added to the surfactant in increasing concentrations (3.0-10.0 g/L), and short-carbon-chain alcohols (methanol, ethanol, n-propanol and n-butanol) were used to shift the onset of precipitate formation. The critical micelle concentration (CMC) of SDS in the presence of alcohols was also determined. It was established that among these alcohols, methanol and ethanol did not exert significant effects on the solubility of the Ca(DS)2 precipitate, while n-propanol and n-butanol were found to be much more efficient inhibitors. In addition, all the alcohols in the applied concentration range (up to 20 V/V%) were found to decrease the critical micelle concentration of SDS.

A Study of the Micellar Formation of N-Alkyl Betaine Ethyl Ester Chlorides Based on the Physicochemical Properties of Their Aqueous Solutions.

In this study, a series of four surface-active compounds-N-alkyl betaine ethyl ester chlorides, CnBetC2Cl-were synthesized and characterized in aqueous solutions. As with other alkyl betaines, these amphiphiles can be practically used, for example, as co-surfactants and/or solubility enhancers acting according to hydrotropic or micellar mechanisms, depending on the alkyl chain length in the amine. We focused on the representatives of the medium alkyl chain length (C6-C12) to find the dependence between the alkyl chain length in N-alkyl betaine ethyl ester chlorides and the surface, volumetric, acoustic, and viscometric properties of their solutions. Ethyl esters, the derivatives of amino acids, were chosen to increase functionality and take advantage of possible hydrolysis in solutions at higher pH, which is also a key parameter in biodegradability. The micellization parameters were calculated based on the physicochemical characteristics. We focused our interest on the ester with a dodecyl substituent since we can compare and discuss its properties with some other C12 representatives that are available in literature. Surprisingly, its micellization characteristic is almost temperature-independent in the investigated temperature range, t = (15-45) °C. Particularly interesting are the results of dynamic light scattering (DLS), which show that the changes in physicochemical parameters of the C12 homolog around the CMC are caused by the two types of micelles of different sizes present in solutions.

Towards understanding the crystallization of photosystem II: influence of poly(ethylene glycol) of various molecular sizes on the micelle formation of alkyl maltosides.

The influence of poly(ethylene glycol) (PEG) polymers H-(O-CH2-CH2)p-OH with different average molecular sizes p on the micelle formation of n-alkyl-ß-D-maltoside detergents with the number of carbon atoms in the alkyl chain ranging from 10 to 12 is investigated with the aim to learn more about the detergent behavior under conditions suitable for the crystallization of the photosynthetic pigment-protein complex photosystem II. PEG is shown to increase the critical micelle concentration (CMC) of all three detergents in the crystallization buffer in a way that the free energy of micelle formation increases linearly with the concentration of oxyethylene units (O-CH2-CH2) irrespective of the actual molecular weight of the polymer. The CMC shift is modeled by assuming for simplicity that it is dominated by the interaction between PEG and detergent monomers and is interpreted in terms of an increase of the transfer free energy of a methylene group of the alkyl chain by 0.2 kJ mol-1 per 1 mol L-1 increase of the concentration of oxyethylene units at 298 K. Implications of this effect for the solubilization and crystallization of protein-detergent complexes as well as detergent extraction from crystals are discussed.

Phyto-cosmeceutical gel containing curcumin and quercetin loaded mixed micelles for improved anti-oxidant and photoprotective activity.

Ultra Violet radiations induced skin damage and associated skin disorders are a widespread concern. The consequences of sun exposure include a plethora of dermal conditions like aging, solar urticaria, albinism and cancer. Sunscreens provide effective protection to skin from these damages. Besides FDA approved physical and chemical UV filters, phytoconstituents with their multi functionalities are emerging as frontrunners in Therapy of skin disorders. Objective of this study was to develop novel phyto-dermal gel (PDG) with dual action of sun protection and antioxidant potential using polymeric mixed micelles (PMMs) are nanocarriers. PMMs of Pluronic F127 and Pluronic F68 loaded with curcumin and quercetin were optimized by 32 factorial designs. Responses studied were vesicle size, SPF, entrapment efficiency of curcumin and quercetin and antioxidant activity. Droplet size ranged from 300 to 500 nm with PDI in between 0.248 and 0.584. Combination of curcumin and quercetin showed enhanced sun protection and antioxidant activity. Pluronics played a significant positive role in various parameters. In present studies vesicle size of factorial batches was found to be between 387 and 527 nm, and SPF was found to be between 18.86 and 28.32. Transmission electron microscopy revealed spherical morphology of micelles. Optimized micelles were incorporated into Carbopol 940. Optimized PDG was evaluated for pH, drug content, spreadability, rheology, syneresis, ex vivo permeation, and skin retention. Hysteresis loop in the rheogram suggested thixotropy of PDG. Syneresis for gels from day 0-30 days was found to be between 0% and 12.46% w/w. SPF of optimized PDG was 27±0.5. Optimized PDG showed no signs of erythema and edema on Wistar rats. PMMs thus effectively enhanced antioxidant and skin protective effect of curcumin and quercetin.

New insights into antibubble formation by single drop impact on a same-liquid pool.

HYPOTHESIS: Secondary drops (SDs) generated when falling drops impact a same-liquid bath can potentially generate antibubbles. Different mechanisms of antibubble formation can be identified and their size and formation probability (PAb) can be predicted. EXPERIMENTS: Surfactant solutions were dropped from various heights using a highly stable pulseless microfluidic pump in a same-liquid bath. The impact was recorded using a high-speed camera. The formation of SDs and antibubbles as well as their sizes were evaluated considering the falling-drop height (HFD) and dimensionless parameters. FINDINGS: This study reports new mechanisms for antibubble formation from SDs. A decrease in the surface tension yielded a thinner central jet, thereby yielding more SDs. Larger values of the HFD, impact velocity (U), and Weber number (We) increased the SD size and decreased the SD count; the increase in size increased the antibubble size. The number of SDs correlated with the formation of two distinct antibubbles or a single (coalesced) antibubble. The plots for PAb versus HFD, U, and We exhibited two distinct peaks. A moderate increase in the surfactant concentration enhanced PAb in the first regime, whereas an excessive concentration limited antibubble formation. Artificial neural modeling can successfully predict antibubble formation. These findings provide valuable insights for the research on controlled antibubble generation.

Unraveling How Antimicrobial Lipid Mixtures Disrupt Virus-Mimicking Lipid Vesicles: A QCM-D Study.

Single-chain lipid amphiphiles such as fatty acids and monoglycerides are promising antimicrobial alternatives to replace industrial surfactants for membrane-enveloped pathogen inhibition. Biomimetic lipid membrane platforms in combination with label-free biosensing techniques offer a promising route to compare the membrane-disruptive properties of different fatty acids and monoglycerides individually and within mixtures. Until recently, most related studies have utilized planar model membrane platforms, and there is an outstanding need to investigate how antimicrobial lipid mixtures disrupt curved model membrane platforms such as intact vesicle adlayers that are within the size range of membrane-enveloped virus particles. This need is especially evident because certain surfactants that completely disrupt planar/low-curvature membranes are appreciably less active against high-curvature membranes. Herein, we conducted quartz crystal microbalance-dissipation (QCM-D) measurements to investigate the membrane-disruptive properties of glycerol monolaurate (GML) monoglyceride and lauric acid (LA) fatty acid mixtures to rupture high-curvature, ~75 nm diameter lipid vesicle adlayers. We identified that the vesicle rupture activity of GML/LA mixtures mainly occurred above the respective critical micelle concentration (CMC) of each mixture, and that 25/75 mol% GML/LA micelles exhibited the greatest degree of vesicle rupture activity with ~100% efficiency that exceeded the rupture activity of other tested mixtures, individual compounds, and past reported values with industrial surfactants. Importantly, 25/75 GML/LA micelles outperformed 50/50 GML/LA micelles, which were previously reported to have the greatest membrane-disruptive activity towards planar model membranes. We discuss the mechanistic principles behind how antimicrobial lipid engineering can influence membrane-disruptive activity in terms of optimizing the balance between competitive membrane remodeling processes and inducing anisotropic vs. isotropic spontaneous curvature in lipid membrane systems.

Membrane-Disruptive Effects of Fatty Acid and Monoglyceride Mitigants on E. coli Bacteria-Derived Tethered Lipid Bilayers.

We report electrochemical impedance spectroscopy measurements to characterize the membrane-disruptive properties of medium-chain fatty acid and monoglyceride mitigants interacting with tethered bilayer lipid membrane (tBLM) platforms composed of E. coli bacterial lipid extracts. The tested mitigants included capric acid (CA) and monocaprin (MC) with 10-carbon long hydrocarbon chains, and lauric acid (LA) and glycerol monolaurate (GML) with 12-carbon long hydrocarbon chains. All four mitigants disrupted E. coli tBLM platforms above their respective critical micelle concentration (CMC) values; however, there were marked differences in the extent of membrane disruption. In general, CA and MC caused larger changes in ionic permeability and structural damage, whereas the membrane-disruptive effects of LA and GML were appreciably smaller. Importantly, the distinct magnitudes of permeability changes agreed well with the known antibacterial activity levels of the different mitigants against E. coli, whereby CA and MC are inhibitory and LA and GML are non-inhibitory. Mechanistic insights obtained from the EIS data help to rationalize why CA and MC are more effective than LA and GML at disrupting E. coli membranes, and these measurement capabilities support the potential of utilizing bacterial lipid-derived tethered lipid bilayers for predictive assessment of antibacterial drug candidates and mitigants.

Critical evaluation of the performance of rhamnolipids as surfactants for (phyto)extraction of Cd, Cu, Fe, Pb and Zn from copper smelter-affected soil.

Rhamnolipids are biosurfactants produced by bacteria belonging to the Pseudomonas genus. They are discussed to complex heavy metal cations stronger than cations of Fe, Ca, Mg. It is therefore suggested to employ rhamnolipids in phytoextraction where their addition to soil should result in preferential complexation of heavy metals that can be taken up by plants, thus enabling rapid and ecological clean-up of contaminated soil. In order to test this concept, we evaluated the rhamnolipid-mediated phytoextraction of heavy metal from soil collected from the vicinity of a copper smelter. The following aspects were investigated: i) selectivity of rhamnolipids towards Cu, Zn, Pb, Cd and Fe during soil washing; ii) phytoextraction efficiency of each ion with respect to the effective concentration of rhamnolipids; iii) possible phytotoxic effects; iv) effect of micro-sized polystyrene amendment. The experiments evaluated soil washing efficiency, BCR (Community Bureau of Reference) sequential extraction to determine the impact of rhamnolipids on the mobility of metal ions, phytoextraction with maize (Zea mays L.) and phytotoxic effects based on dry matter, chlorophyll fluorescence and content. The obtained results indicated that rhamnolipids lack desired selectivity towards heavy metal ions as Fe was complexed more efficiently by 80 % of the available rhamnolipids compared to priority pollutants like Zn, Cu, Pb, which were complexed by only 20 % of the tested rhamnolipids. With increased concentration of rhamnolipids, the soil washing efficiency increased and shifted in favour of Fe, reaching values of approx. 469 mg for Fe and only 118 mg in total of all tested heavy metals. Phytoextraction also favoured the accumulation of Fe, while Cd was not removed from the soil even at the highest applied rhamnolipid concentrations. Considering the selectivity of rhamnolipids and the costs associated with their production, our results suggest the need to search for other alternative (bio)surfactants with better selectivity and lower price.

Drug Extended-Release System Utilizing Micelle Formation of Highly Water-Soluble Drugs and a Counter Polymer.

The objective of this study is to clarify the mechanism of extending release of highly water-soluble drugs via counter polymer (CP) utilization in poly(ethylene oxide) (PEO)/polyethylene glycol (PEG) matrix tablets. Carbomer, poly(acrylic acid), was used as a CP, which has the opposite charges to the drugs. The in vitro release of several highly water-soluble drugs from PEO/PEG tablet with or without CP were tested, the relationship between the sustained release effect by a CP (SRE) and the physicochemical properties of the drugs was investigated. The results demonstrated that the utilization of CP can extend the release of some highly water-soluble drugs by effectively controlling the drug diffusion through matrices. On the other hand, the effectiveness of CP was different depending on the drugs applied. There were not statistical correlations between SRE and physicochemical properties such as solubility, molecular weight, and charge intensity of the drugs, while a micelle forming property of the drugs played an important role in SRE by CP. It was concluded that CP, Carbomer, having negative charges could effectively interact with opposite charges on the surface of stable drug micelles, which could result in a significant decrease in drug diffusion leading to extended drug release. It is considered that the system utilizing CP is a promising approach to achieve extended release of highly water-soluble drugs with a reasonable tablet size, especially in the case of large drug loading.

Application of Pluronics for Enhancing Aqueous Solubility of Lipophilic Microtubule Destabilizing Compounds on the Sea Urchin Embryo Model.

In screening, the dilution of DMSO stock solution of a lipophilic molecule with an assay medium often causes compound precipitation. To overcome the issue, the application of Pluronics as cosolvents was examined using a phenotypic sea urchin embryo assay that allows for the quick and facile evaluation of the antiproliferative effect together with systemic toxicity. Maximum tolerated concentration values for Pluronics L121, P123, and F127 were 1.4 µM, 8.6 µM, and 39.7 µM, respectively, and correlated directly with their hydrophilicity. Pluronics L121 and P123 suppressed cleavage and blastomeres retained the round shape, unlike hydrophilic Pluronic F127, which induced fertilization envelope creasing and embryo deformation that could be associated with the interaction of hydrophilic PEO units with mucopolysaccharides at the surface of sea urchin embryos. The toxicity of P123, but not of L121 and F127, was temperature-dependent and markedly increased at lower temperatures. CMC values obtained at different temperatures confirmed that the toxic effect of P123 was associated with both unimers and micelles, whereas F127 toxicity was related mainly to micelles. Evaluation using phenotypic sea urchin embryo assay revealed that potent microtubule destabilizers, namely albendazole, diarylisoxazole, and two chalcones, retained antimitotic activity after the dilution of their DMSO or 2-pyrrolidone stock solutions with 1.25% w/v Pluronic P123 or 5% w/v Pluronic F127. It was suggested that Pluronic P123 and Pluronic F127 could be used as cosolvents to improve the solubility of lipophilic molecules in aqueous medium.

Ternary Mixed Micelle Hexadecyltrimethylammonium Bromide-Dodecyltrimethylammonium Bromide-Sodium Deoxycholate: Gibbs Free Energy of Mixing and Excess Gibbs Energy of Mixing.

Pharmaceutical, food, and cosmetic formulations often contain binary or ternary surfactant mixtures with synergistic interactions amongst micellar building blocks. Here, a ternary mixture of the surfactants hexadecyltrimethylammonium bromide, dodecyltrimethylammonium bromide, and sodium deoxycholate is examined to see if the molar fractions of the surfactants in the ternary mixed micellar pseudophase are determined by the interaction coefficients between various pairs of the surfactants or by their propensity to self-associate. Critical micelle concentrations (CMC) of the analyzed ternary mixtures are determined experimentally (spectrofluorimetrically using pyrene as the probe molecule). Thermodynamic parameters of ternary mixtures are calculated from CMC values using the Regular Solution protocol. The tendency for monocomponent surfactants to self-associate (lower value of CMC) determines the molar fractions of surfactant in the mixed micelle if there is no issue with the packing of the micelle building units of the ternary mixed micelle. If a more hydrophobic surfactant is incorporated into the mixed micelle, the system (an aqueous solution of surfactants) is then the most thermodynamically stabilized.

Thermodynamic Insights of the Molecular Interactions of Dopamine (Neurotransmitter) with Anionic Surfactant in Non-Aqueous Media.

This study was aimed at establishing the interactions prevailing in an anionic surfactant, sodium dodecyl sulfate, and dopamine hydrochloride in an alcoholic (ethanol) media by using volumetric, conductometric, and tensiometric techniques. Various methods were utilized to estimate the critical micelle concentration (cmc) values at different temperatures. The entire methods yielded the same cmc values. The corresponding thermodynamic parameters viz. the standard free energy of micellization (Gmico), enthalpy of micellization (Hmico), and entropy of micellization (Smico) were predicted by applying the pseudo-phase separation model. The experimental density data at different temperatures (298.15 K, 303.15 K, 308.15 K, and 313.15 K) were utilized to estimate the apparent molar volumes (Vϕo) at an infinite dilution, apparent molar volumes (Vφcmc) at the critical micelle concentration, and apparent molar volumes (ΔVφm) upon micellization. Various micellar and interfacial parameters, for example, the surface excess concentration (Γmax), standard Gibbs free energy of adsorption at the interface (ΔGoad), and the minimum surface area per molecule (Amin), were appraised using the surface tension data. The results were used to interpret the intermolecular interactions prevailing in the mixed systems under the specified experimental conditions.